| |
Technical data: |
on both sides automatically working, for straight right-angled workpieces. Workpiece dimensions: Workpiece length: 167 -1500 mm workpiece width: 50 - 320 mm of workpiece thickness: 10 - 32 mm The being certain machine side is in transportation direction seen left and not adjustable. The intake and discharge height amount to 875 mm. The workpieces are transported with cam chains by the work stations. The workpieces are worked on in the stop. The machine is electrically locked. Bolting device for production lines is intended. Grundmaschine: - with max. workpiece length 1500 mm - with cutting to length station - with horizontal drilling station - with glue data and Duebeleintreibstation - 1 filling magazine, magazine thigh approx. 250 mm highly, with orientation cylinder - with for each page 1 vibratory conveyor and 1 individual case device - with cable-drag - with lateral Duebellochausblasduesen - with mechanical digital display of the hearing adjustment - without Bohrkoepfe - digital length announcement - SPS control - without range fence Min. workpiece length 167 mm High-tilting belt introduction at the machine intake 1 upper carrier with reciprocally hardened linear for run gene Hardware with low-lying Maschinenbett, being certain workpiece attacks, adjustable work stations, hardened and polished Fuehrungsbahnen, Breitenverstellung with digital display. Assembly of the Saegestation: For each page 1 Kreuzsupport with Ritzsaegemotor 1.5 KW of 2800 UpM, 50 cycles per second equipped with Ritzsaegen Durchm. 150 x Durchm. 40 mm 2 Saegeflan, hardened and polished The Ritzsaegen works from downside, with high price increase upward. For each page 1 Kreuzsupport with Zerspanermotor 2.2 KW, 2800 UpM, 50 cycles per second equipped for Zerspaner Durchm. 200 x Durchm. 65 mm. Suction connections: 2 x Durchm. 100 mm upward 2 x Durchm. 80 mm upward Laermschutzhaube 1 brake assembly for 4 sawing engines Assembly of the horizontal drilling station: 2 drilling units with ever 1 Bohrmotor 2 KW, 2800 UpM, 50 cycles per second with double acting cylinder, stroke 75 mm, Linearfuehrung, drilling depth control. Suction connections: 2 x Durchm. 100 mm 2 pcs. drilling head D-1277/A with ball race with 7 drilling spindles drill admission: for quick change fodder division: 32 mm Assembly of the vertical drilling station 5 pcs. drilling unit (execution 030. 022) (on one side stored in linear for run gene) with mounting, displaceable over the entire work width - reading LED display, 100 mm displaceable in operating depth - reading digital display, drill distance attitude - reading over digital display with ever 1 Bohrmotor 2 KW, 2800 UpM, 50 cycles per second of double acting feed cylinders, stroke 75 mm, Kugelbuechsenfuehrung and troughing 2 pcs. drilling head D-1277/A with ball race with 11 drilling spindles drill admission: for quick change fodder division: 32 mm 2 pcs. drilling head D-1277/A with ball race with 5 drilling spindles drill admission: for quick change fodder division: 32 mm 1 pcs. drilling head D-1277 with ball race with 4 drilling and 1 intermediate spindle drill admission: for quick change fodder division 2 x 16 + 32 mm 2 pcs. Drilling head D-1277 with ball race with 5 drilling spindles drill admission: for quick change fodder division: 25 mm 3 pcs. drilling head D-1277 with ball race with 6 drilling and 2 intermediate spindles drill admission: for quick change fodder division: like parts of No. H014/0615 The parts are bored in each case with countering wood (clean withdrawal of the drills). Allocation of the vertical drilling units: 3 x in front at the upper bar 2 x in the back at the upper bar 5 x ball race with Schnellverstellung 2 x of vertical clamping cylinders 2 x lateral workpiece adjustment Turning station for workpieces with reciprocal drillings (parts of No. B 719, H039/0113, H041/0113, H048, H049/0116) Assembly of the indication of glue and peg driving station 6 a peg individual work witness type 34 for each page 1 peg double tool for each side peg Durchm. 7 - 14 mm of division 32 mm peg dual spacing min. 32 mm - max. 256 mm peg-stood 8 mm of peg length 30 mm 1 peg double tool for each side (pegs one above the other) Peg length: 1 mm of peg diameters: 0.2 mm Electronic glue monitoring ELC (patent announced) Before the glue valve the control instrument is installed. With each clock rate (glue splash) the glue river is measured. At a switched on glue valve if no glue is squirted, the machine interrupts its clock rate and indicates at the switchgear cabinet the glue valve concerned. 16 x elektronsiche glue monitoring ELC Glue valves and peg supply separately on and disconnectible, central glue quantity attitude by digital time delay relays Glue high-pressure pump with glue printing monitoring 7:1 for each page 1 vibratory conveyor with 8 discharges. 2 x control mirrors for vibratory conveyors 1 workpiece in the middle support (deep bed) with attack and adjustable back attack for 1 work station. Workpiece in the middle support - automatically lowerable 1 motor Breitenverstellung of the mobile machine side. 3 pair of workpiece back attacks in the work stations 1 static frequency changer for chain driving motor for gentle chain approach and gentle chain stop with brake. Engine speed adjustably. Frequency changer 50/100 cycles per second for cutting to length station Achievement: up to 16-18 parts/min. - Waste wood conveyor - withdrawal duct - shelter - protection fence with 2 secured Tueren - max. Workpiece width 320 mm - delivery cylinders of pre-aged machine
The data are mechanically translated in the english language. Translation errors are possible. No guarantee for printed data and pricing.
|
|
pdf
document