| |
Technical data: |
Year of construction 1991 with CNC steered workpiece transportation Description of function: ------------------------------- Of an operator a workpiece on a roller race - arranged left of the basic machine body - put down under equal early setting on an attack ruler. According to preset programme now the fully automatic work routine takes place, as soon as the starting function is released of the operating person. Over rack of led workpiece rear edge attack drives now - of a sensing device supervised - to the rear edge of the workpiece on and couples themselves over the vacuum Auger to the workpiece and promotes this on 1st cut average. After reaching the given cut position the workpiece is aligned again at the ruler, released pneumatically strained and the work routine - Besaeum or mitre cut, with or without foil gluing on, with or without scratching -. After work routine and release of the work of piece by the tension and orientation elements the workpiece is promoted on 2nd given cut average, whereby perhaps this workpiece can be taken over of the 2nd Greifeinheit on the right side of the machine, if the Massbereich and/or the sectional view permits this. The 2nd grab system drives then far-cut positions on up to the appropriate final cut or last mitre cut. After treatment the workpiece is promoted of this 2nd grab system to a withdrawal position, where it can be taken manually. The wl 38 can be switched also in such a way that it is fed of an operator with a workpiece and this is supplied to the operator after effected mitre cuts again to destacking. Technical data: ---------------------------- Workpiece completion length min. 550 mm of workpiece completion length max. 3,000 mm workpiece width min. 100 mm workpiece width max. 1200 mm of workpiece strength min. 10 mm of workpiece strength max. 22 mm Achievement of the plant: A. with normal, angular Boxenfertgung 1 part of edition approx. 1 Box/1 minute b. With 8-eckigen boxes - cut depth ever approx. 1000 mmm approx. 1 box 2 minutes c. Working on for each clock of max. 3 parts Grundmaschine consisting of: A. basic machine body (massif steel bed) equipped with workpiece supporting table and tiltable mitre cut against situation as well as upper cross beam framework einschcl. Fuehrunsgsystem for the admission of working on supports b. manual angleadjustable sawing support Winkelverstellung for each engine 22.5 - 60 Equipped with: 2 three-phase alternating current engines, for each engine 4.2 KW with n = 6000 rpm., excluding tools C. tightener f. pneumatic stretching of the workpieces waehrend the milling procedure, d. 1 links and 1 right workpiece transport equipment (conveyor) laid out according to the max. Workpiece lengthens, equipped with appropriate tension and orientation elements to electronic starting of the respective Gehrunsgschnittpositionen e. Pneumatics control f. 4 - Axles CNC control in the basic execution of the plant are steered the following axles CNC: 1. Gehrunsgschnittlaenge of the Saegesupportes 2nd mitre depth of the Saegesupportes 3rd starting the cut positions of the edition conveyor 4th starting the cut positions before the decrease conveyor g. Electrical switchgear cabinet 12.WL 38 extension edition - and decrease of conveyor around 500 mm each so larger workpiece length the en to be arbeiitet can standard workpiece length = 2500 mm) 13.WL38 1 special working on support equipped with 2 three-phase alternating current engines ever 4.2 KW n = 6000 rpm, both engines laid out in not tiltable execution and are independently manually hoehenverstellbar. For the sawing slot technology an engine is equipped with a sawing package and the other engine receives to a special Nuter For this Zusatzaggregat the CNC control on 5 axles melamin resin plates 20.WL38 frequency changer 50/100 Hertz, Schutzart IP 54 incl. automatic star triangle approach 30 KVA extended by also the depth feed of the complete unit over the CNC to steer excluding tool 18.wL 39 1 automatic foil gluing on device, working under employment tungsten carbide of a Saeegblattes to begin when milling or laminated 21.WL38 high-speed brake mechanism of the engines of the Saegesupportes rapid stop of the engines of the Spezialbearbeitungssupportes Operating voltage: 380 V, 50 Hertz Total connected load approx. 20 KW of compressed air 6 bar Total weight: approx. 4800 kg space requirement: 7000 x 2500 x 1700 mm
The data are mechanically translated in the english language. Translation errors are possible. No guarantee for printed data and pricing.
|
|
