| |
Technical data: |
year of construction 1992 technical data workpiece
dimensions: max.2500 x 1000 mm of min. 300 x 280 mm of thicknesses 10
40 mm of kind of workpiece beating up hurry furniert or laminates.
Chip board roughly weight: max. 50 kg of achievement: 12 clocks /min,
with 2 parts one behind the other = 24 partial/min fixed edge on the
left of projection surface material 10 mm work height machine I:
approx.. 920 mm stapelhoehe: min. 300 mm of pile lower edge starting
from Fuessboden, max. 1900 mm of pile upper edge starting from floor,
thus effective stapelhoehe 1600 mm of inclusive. Already plate pile
arrangement: 2-spurig overall height: 3450 mm of operating voltage:
380 V, 50 cycles per second. Control voltage: 220 V, 50 cycles per
second. according to VDE lacquer finish: Robustik Strukturlack green
mobile one of parts: Robustik Strukturlack yellow foundation:
Industrial concrete floor steal-reinforces, thickness 150 mm, quality
B 25 TB 21/ER/25/10 saving EDT feeding station digless, on one side
right for feeding manufacturing routes (fixed edge left). up to 50 kg weight and 12 clocks/min. 1 propelled pile roller race,
set up before the feeding station (V=12 m/min) 1 lifting platform with
propelled pile roller race. Already disk disposal for single plates in
transportation direction over Roellchenschienen, already plate
withdrawal manually (V=12 m/min). (pile change time 60 seconds) 1
vacuum August car for minimum workpiece dimensions 300 x 280 mm, which
drives at 2 rails (crank gear). 1 stripping wall with manual thickness
attitude. 1 workpiece setting off station. 1 placing roller race (V=18
- 90 m/min.) 1 inlet roller course with inclined/slanted supporting
rollers for following machines. (V=10 -50 m/min). Electrical control
for the entire operational sequence, implemented in Schtuetz
technology (Kloeckner Moeller). Switchgear cabinet with control
tablet, directly at the machine set up. Total total: 13/20 KW
consumption of air: 13 NL/Takt (1/2 R) Betribsdruck: 5 bar of
operating voltage: 380 V, 50 cycles per second. Control voltage: 220 V, 50 cycles per second. according to VDE number
installs: 5120 1 pieces of 2 Spuriges feeding L = 2500 with additional
digging rust in the placing course. Maximum workpiece length 2500 mm.
Number: 6090 1 pieces of SPS control make Siemens with fault-tracing
number: 5082 1 pieces of pile change time 30 seconds with stapelhoehe
of 600 mm and more.
The data are mechanically translated in the english language. Translation errors are possible. No guarantee for printed data and pricing.
|
|
