| |
Technical data: |
fixed fence: left side
rolling chain
- infeed fence
- free space approx. 400 mm
- trimming unit
1 motor 3 kW, 300 cycles, 18.000 U/min.
swingable 10 degrees
autom. 8-fold revolver
- trimming unit
1 motor 3 kW, 300 cycles, 18.000 U/min.
swingable 10 degrees
autom. 8-fold revolver
- panel pre-heating up to 45 mm panel thickness
- hot melt gluing unit - magazine HL 23 – stripe magazine
edge thickness approx. = 0,4 - 20 mm
edge width approx. = 16 - 65 mm
for max. 2.500 mm long lippings
- coil end trim knife for single coil 3,5 mm
edge thickness max. 3,5 mm
edge width max. 65 mm
- edge pre-heating, pattern side
- pressure zone
1 main pressure roll, driven, diam. 200 mm
12 postpressure rollers, diam. 80 mm
lateral motorised moveable
12 postpressure rollers, bottom
for positioning the lippings
- end trim unit lippings
2 motors each 1 kW, 300 cycles, 18000 U/min.
edge thickness straight max. 20 mm
edge width max 65 mm
- trimming column
2 motors each 2,2 kW, 100 cycles, 6.000 U/min.
- trimming unit
1 motor 4,5 kW, 100 cycles, 6.000 U/min.
swingable 90 degrees
- trimming unit
1 motor 4,5 kW, 100 cycles, 6.000 U/min.
swingable 90 degrees
- profile milling unit top and bottom
2 motors each 2,2 kW, 300 cycles, 18.000 U/min.
- motorised lateral adjustment of unit beam
- application unit lacquer/stain top/bottom
- softforming gluing unit
- magazine HL 20
edge thickness approx. = 0,4 - 6 mm
edge width approx. = 16 - 65 mm
- magazine HL 10 – 2 coils 1,5 kW
edge thickness approx. = 0,4 – 1,5 mm
edge width approx. = 16 - 65 mm
- coil end trim knife for single coil 1,5 mm
edge thickness max. 1,5 mm
edge width max. 65 mm
coil diam. max. 600 mm
- lubrication unit
for driven pressure roller with anti-stick solvent
- edge pre-heating, pattern side
- multiple pressure zone 6-fold
for softforming profiles
- profile pressure roller set fixed at top
- end trim unit softforming
2 motors each 0,4 kW, 300 cycles, 18000 U/min.
edge thickness straight max. 6 mm
edge width max 65 mm
- motorised lateral adjustment of unit beam
- pre-milling unit 1,5 kW, 300 cycles, 18000 U/min.,
- free space approx. 650 mm
- milling unit top and bottom 0,6 kW
2 motors each 0,6 kW, 300 cycles, 18000 U/min.
swingable 0-30 degrees
- milling unit top and bottom 0,6 kW
2 motors each 0,6 kW, 300 cycles, 18000 U/min.
swingable 0-30 degrees
- profile trimming unit bottom
for cross processing of softforming pieces and for contour trimming leading- and trailing edge bottom
2 motors each 0,3 kW, 300 cycles, 18000 1/min.
- motorised lateral adjustment of unit beam
- profile trimming unit top
for cross processing of softforming pieces and for contour trimming leading- and trailing edge top
2 motors each 0,3 kW, 300 cycles, 18000 1/min.
- anti-stick solvent applicator
- buffing unit top + bottom with oscillation
6 motors each 0,18 kW, 220/380 V, 50 cycles, 1.500 U/min.
- belt sanding unit
for sanding straight edges
- chamfer belt sanding unit 45 degrees bottom
- chamfer belt sanding unit 45 degrees top
- buffing unit top and bottom, oscillating
2 motors each 0,25 kW
- Homatic – production line control NC 50
|
|
