| |
Technical data: |
IMA Doppelendprofiler year of construction 1992 Machine versions: Linksmaschine machine (1/2) machine for massif timber frames + Fuellungen. Work width max. approx. 2000 mm of min. run width with workpiece-stood 16.5 mm Workpiece thickness max./min. approx. 8/45 mm more firmly workpiece-stood side at the chain course for each: approx. 16,5 mm a) Laengsbearbeitung without mot. Holder and edition would seem between D. Chain rail approx. 205 mm of b) Laengsbearbeitung with mot. Holder and edition would seem between D. Chain course f. Transverse's treatment 240 mm of c) transverse's treatment - only applicable with machines with cam approx. 320 mm. Mains voltage: 3 x 380 V 5% frequency: 50 cycles per second of control voltage: 220 V, valve tension: 220 V flow velocity: approx. 7-35 m/min. Aggregate price increase: over linear path control - PZP control integrates into the IMATRONIC. Breitenverstellung: motor displaceable over SSB Positioniergetriebe, ablesb. over electron. Measure preselection and Istweranzeige integrate in the PZP mini control system. Lacquer finish: Ral 6011 - Structure - ral 6011 resedagruen - silk matt smoothly for all aggregates under the hoods ral 6011 - structure - resedagruen for all sound sip Exhaust hoods. Machine inscription: German Safety and protection devices according to the regulations valid in the FRG. 1 Grundmaschine mti Breitenverstellung and underbody 1 driving motor: 4.0 KW 1 browsing transmission type R57VW5-2028-N-400-4 1 width adjustment engine: 1.5 KW SSB position drive Equipment support in sideadjustable execution, however firmly screwed on. 1 printing rail in the back, 1 printing rail in front, 1 Fuehrungsschiene, hardened 2 spindles 1 lateral ripple for the drive. 2 drive belt transportation in sidetransferred execution 2 upper printing rails 2 chain transport 2 chain rails 1 transmission in the back, 1 transmission in the back 3 vertical adjustment with Fuehrungsstueck 2 pcs. with chain wheel 2 engines 0.25 KW 1 Sicherheitsreissleine safety light barrier f. Breitenverstellung (RH. Carrier). 2 chain with cam number of the division 210 Verl. Chain course for 600 mm of parts with developed workpiece magazine. With attack ruler on the firm work. - Side. With orientation cams on verfahrb. Work side and with Siko announcements. 2 aggregate stands vertical displacement y axis without Fuehrungsstueck, thus also firmly screwed on cutting saw. Handverstllung of vertically ueber Siko announcement. Horizontal adjustment x axis hand-operated control with Siko announcement. Equipment processing units cutting sawing unit, controllable, not tiltable with Perske engine 1.5 KW/waving. 30 mm of type KNS 50,11-2 engine horizontal developed - works in the synchronisation, for saw blade Durchm. 100 - 200 mm. Milling stand foot on the front milled off, for miller diameter. 125 - 150 mm without tools 2 aggregate stands in special equipment. Stand height: 1050 mm with head end plate Vertical displacement y axis 1 guiding piece hand-operated control with Siko announcement Horizontal adjustment x axis hand-operated control with Siko announcement Equipment processing units no place reserve. 1 Zerspanereinheit not controllable and not tiltable. with Perske engine 4.4 KW of type: KNS 70.12-2D of fuer Werkzeugdurchm. approx. 200 mm however without tools with d.c. injection brakes. Milling stand foot at the back milled out. 2 aggregate stands stand height: 1050 mm Vertical displacement y axis 1 guiding piece hand-operated control with Siko announcement. Horizontal adjustment x axis hand-operated control with Siko announcement. Equipment processing units 2 milling aggregates for milling/profile milling/slot milling controllable and not tiltable with Perske engine 3.3 KW of type: KRS 61,11-2 with engine intermediate plate without tool Werkzeugdurchm. approx. 200 mm with d.c. injection brake. With Wendeschalter for equal and Gegenlauf. 2 sound sip/exhaust hood hood length: 2150 mm broad: 1050 mm of hood with amber safety switch for flap and partition plate b. 960 /1190 mm 2 air locks above and down with Stutzendurchm. 100 mm of 2 suction nozzle connections Durchm. 300 mm f. D. Carrier withdrawal duct 2 sound sip/exhaust hood hood length: 1700 mm cutting aggregate with 2 x 100 mm of suction nozzles f. Fine dust. H. with Berstein - safety switches for flap and with hinged grilles. 2 edge sharpening aggregate for sharpening perpendicular edges, not tiltable, totalreciprocating 1.8 KW, 50 cycles per second, 3000 rpm. 2 profile sharpening aggregate Heesemann type M2 from above sharpening and/or upward reciprocating around 45 degrees schwenkar, not, vertically and horizontal adjustably with 1,1/1.8 KW engine., 380 V, 50 cycles per second by hand hoehen and sideadjustably with Siko announcements, with single suction nozzle Durchm. 120 mm. 2 steel section boots f. S-profile air-cooled 2 profile sharpening aggregates Heesemann type M2 from above sharpening and/or upward around 45 degrees givable, not reciprocating, vertically and horizontal adjustably, with 1,1/1,8 KW engine, 380 V, 50 cycles per second. and sideadjustably with Siko announcements with single suction nozzles Durchm hoehen by hand. 120 mm. 2 steel section boots air-cooled. 2 profile sharpening aggregates for sharpening small profiles, from downside sharpening and with an engine 0.55 KW, 50 cycles per second, 1500 rpm., cultivated on the equipment support. 2 steel section boots to edge break air-cooled. 1 excerpt device, approx. 890 mm long with Aufnahmemoeglichkeit for a Buerstenaggregat at a stand (Fabr. Heesemann) with vertical and horizontal adjustment. Aggregate is tiltable arranged. Cultivated to a angle console. 1 medium frequency transformer 40 KvA, IP 54, 100 cycles per second, 6000 rpm., with star triangle starting switch. Frequency static frequency changer for cutting engines a) 150 W, 1 medium frequency transformer 5 KvA, IP 54, 200 cycles per second, 12000 rpm. without star triangle starting switches. Change of screwed on subframe on adjustable subframes, reciprocally. 4 profile sharpening aggregates type M 2 2 x left and 2 x right, for sharpening formed, folded or senkrechten workpiece edges, vertical - horizontal and swiveling adjustment, reciprocating with mechanical Siko speedometers, with 1 engine 1.1/1.8 KW, 380 V, 50 cycles per second, 705/1400 UpM, with 1 sanding belt 2300 mm long profile boot from felt with torn-tape condition protection colour ral 6011 structure do not resedgruen. 1 narrow partial rail, chromium plates approx. 3000 mm long, with supporting rollers, so that broader workpieces cannot tip over the Kettenplatte.
The data are mechanically translated in the english language. Translation errors are possible. No guarantee for printed data and pricing.
|
|
