| |
Technical data: |
Tl.-Id. 2063566
Panel length min. 250 mm
max. 2500 mm
Panel width min. 150 mm
max. 896 mm
Motor centre spacing in
drilling station min. 160 mm
max. 576 mm
Centre spacing of
drilling stations min. 136 mm
machine rack in rigid profile frame construction
with both-sided precision linear rolle guiding,
switch cabinet fixed installed at machine rack
incl. electr. control for the automatic
working procedure
releasing by electro-foot switch
1 compressed air maintenance unit R 1''
CHIP EXTRACTION UNIT
by means of conveyor belt and extraction
connection 160 mm diameter.
2 HORIZONTAL DRILLING SUPPORTS WITH 2 DRILLING UNITS
each side 1,0 kW, manual spindle adjustment
workpiece guiding, support- and alignment units.
Pneum. clamping and manual longitudinal adjustment
of horizontal loose side. Measurement reading
(X-Position) by integrated LED-display.
2 HORIOZNTAL CLAMPING STRIPS
mounted at respective horizontal drilling support
2 MANUAL SPINDLE ADJUSTMENTS
of workpiece stops which are guided on linear guidings,
measurement reading (Y-position) by integrated
LED-display. Pneumatic clamping of stop unit.
6 VERTICAL DRILLING SUPPORTS WITH EACH 2 DRILLING UNITS
each side 1,0 kW, 136 mm wide, 220/380 V - 50 cyc.
rpm. = 3000, centralied hydro-pneumatical drill feed
with electr. drill depth contact switching.
Linear roller guidings for the support and drilling
units. Ball roller spindle for adjustment of units
in Y-direction. Integrated digital display for the
measure data acquisition in X, Y 1 and Y 2
DRILLING SUPPORT WITH ONE DILLING UNIT
1,0 kW, 220/380 V - 50 cyc., but vertical drilling
from top incl. cross and longitudinal adjusting
units, LED display and drill depth concact control.
SAFETY SWITCH FOR ALTERNATING BORING
(vertical bottom / vertical top drilling)
6 CLAMPING BRIDGES, MANUAL SWIVELLING
with 2 pneumatic clamping cylinders and
turning-safe wood sealing run, adjustable in
lenght at hardened linear guidings,
pneumatic clamping of clamping bridge,
incl. dragchain for energy supply
4 HORIZ. DRILLING BLOCK WITH 11 SPINDLES
32 mm distance
2 DRILLING BLOCK ADJUSTMENTS
for horizontal drilling support. Each both
drilling units at loose or fix side
are adjusted via a pneumatic cylinder with
40 mm lift in Y-direction. The lift is manual
adjustable.
12 VERTICAL DRILLING BLOCKS WITH 16 DRILLING SPINDLES
25 mm DISTANCE
WORKPIECE TRANSPORT DEVICE
for automatic workpiece throuhfeed in the
drilling machine incl. drive motor and manual
cross adjustment, incl. foldable, driven
transfer transport at the outfeed side
WORKPIECE TRANSPORT DEVICE APPROX. 950 MM LONG
as transfer transport unit in front of drilling machine,
incl. foldable, driven transfer transport
TRAVELLING DEVICE
with 4 height adjustable, ball bearing running rolls
(flange rolls in front, flat guinding rolls behind mounted),
electrical moveable via gear braking motor with
adjusting-limit switch via springed release,
operation by press button at operator panel.
MOTORIZED X-ADJUSTMENT
of vertical or horizontal drilling support
by 8 Nm-DC-direct current motor with two-stage
planetary gear in fast and slow movement.
The respective axis- and driving direction selection
at operator panel.
MOTORIZED Y-ADJUSTMENT FOR 2. WORKPIECE STOP
by 0,3 Nn-DC direct current motor with
single-stage planetary gear
ELECTRO. MULTIPROCESSOR CONTROL HOMATIC 2000
- VME-BUS-workstation
- operating system OS 9
- 40 MB hard disc, 3 1/2'' Floppy
- network connection (ARCNET) possible
- multitasking / real-time operating sytem
- 32-Bit processor of 68000 family
- 12'' monitor
- connection to MS DOS computer via ARCNET
(file transfer) possible
- coupling at CAD-CAM possible
suitable for automatical programm refitting
Each programm consists of one or several
data sets with NC-positioning data as well as
machine functions for control of machine procedure.
The programming occurs via an input keyboard and
screen display with a 12'' cathode ray tube.
For the handling a comfortable operator guidance
with clear text dialog is available.
The chaning of a programm part occurs in EDITOR-MODE.
Here programm parts can be inserted or removed or
programm blocks can be copied. A hard disc and a
3 1/2'' disc run are available as background memory
and for archiving, in which texts, machine programms,
schedules and so on can be stored.
The production flexibility is warrantied through a
free-programmable memory. The process master control
(superior line control) can administer the input
production data. Each as per working programmm the
NC-data and machine funtionc are assigned to the
single machines. Therefore it is possible,
to refitt the machine in sections, and to carry out
quantity manipulation and other interferences.
ELECTRO. ADJUSTING AXIS (X) HORIZONTAL
for a horizontal X-axis, incl. regulator
and control unit.
6 ELECTRO. ADJUSTING AXIS (X) VERTICAL
for a vertical X-axis, incl. regulator
and control unit.
ELECTRO ADJUSTING AXIS FOR 2 STOPS (Y)
incl. regulator and control unit
7 CRASH-PROTECTIONS AUTOMATIC
each support
|
|
