| |
Technical data: |
Tl.-Id. 2063878
in left-hand construction
technical data:
edge material:
a) veneer-/roller and strip material
b) plastic-/roller and strip material
c) solid wood strip
min. edge height approx. 14 mm
max. edge height approx. 55 mm
min. edge thickness approx. 0.4 mm
max. edge thickness approx. 20 mm
min. board thickness approx. 10 mm
max. board thickness approx. 50 mm
min. board width approx. 85 mm
min. board length approx. 150 mm
max. strips approx. 20 x 55 mm
board overhang out of chain conveyor approx. 35 mm
rigit drive for through-run speed of approx. 16 m/min.
mains voltage 3 x 220/380 Volt, 50 cyc.
control voltage 220 V, alternating current
basic machine, consisting of:
- basic frame, steel column, welded, simultaneously support for
chain conveyor and units as well as housing for installation of
electrics
- drive for workpiece transport by gear motor with fix rotation
feed speed approx. 16 m/min.
- continuous conveyor chain with 80 mm wide and 60 mm long chain plates
- continuous upper pressure equipped with:
2 lines rubberized rollers, roller diameter 70 mm, roller width 25 mm,
- height-adjusting column, height adjustment central by
hand wheel, adjustability approx. 50 mm
Equipment details:
- basic machine
- supporting table with fix, heated, temparture-controlled
fence ruler
gluing unit with:
- a hot-melt adhesive glue supply
- a separate glue roller drive, a roller and strip magazine,
max. roller diameter 600 mm
- a main pressure roll and 5 additional pressure rolls
post-pressure station separate by approx. 20 mm adjustable,
pressure roller individually lateral cushion and adjustable
- dividing knife, electro-pneumatic controlled up to
3 mm edge thickness
- snipping unit
for snipping of front and behind strip overhang, for
snipping cut flush or with one chamfer, horizontally
by hand approx. 25 degrees tiltable, with lateral tracing
with 1 front and 1 behind motor 0.4 kw, 133 V, 200 cyc.,
12000 rpm.
max. snipping cross section approx. 65 x 10 mm
max. snipping cross section approx. 55 x 15 mm
max. snipping cross section approx. 50 x 20 mm
max. working speed approx. 16-18 m/min.
with 1 front and 1 behind HM-snipping saw blade 160 x 22 mm,
T = 48
min. panel overhang approx. 30 mm + max. profile thickness,
min. panel length approx. 200 mm
min. distance between two workpieces approx. 600 mm
incl. d.c. brake for two motors à 0.4 kW, 200 cyc.
- pre-trimming/flush trimming unit 08.0555
for the pretrimming/flush-trimming of the upper and lower overhanging
edge material, only for panel thicknesses of more than approx. 25 mm,
swivable about 3 degrees, tracing from the top and bottom, without
lateral tracing,
with 1 upper and 1 lower motor a 1. kW, 133 V, 200 cyc., 12000 rpm,
positioned one-above-the-other, incl. d.c. brake for 2 motors
à 1000 W, 200 cyc.
- fine-trimming/radius/chamfering unit
for fine-trimming/radius-trimming/chamfering of the upper and lower
ovehanging edge material, not swivable, with upper, lower and lateral
tracing, automized height adjustment by top pressure beam, fine-adjustment
as well as lateral adjustments with mechanical digital display, with 1 up-
per and 1 lower motor à 0.15 kW, 133 V, 200 cyc., 12000 rpm, incl. d.c.
brake for 2 motors 150 W, 200 cyc.
- sound absorption / protection hood for covering of snipping unit
as well as flush milling unit
- single suction nozzle at milling units
- free space
- profile-scrapping unit
for re-scrapping of a upper- and lower milled quarter-cyrcle profiles
laterial tracing, with 1 upper and 1 lower HM-drawing tool,
with mechanical digital display 09 for horizontal and vertical
adjustment, with single suction nozzle
- chamfer sanding/buffing unit
for re-cleaning of upper and lower flush-milled edge materials
in are glue groove, horizontal not controllable, tiltable by
a vertical and horizontal axis, with 1 upper and 1 lowre
motor 0.55 kW, 220/380 Volt, 50 cyc., 3000 rpm.
1 frequency transformer 6 kVA, sec. 133 V, 200 cyc.
1200 rpm. protective system IP 54, with switch parts,
without automatic star-delta starter
Total electrical connected load: 12 kW/30A
air connection: 3/8'', min. 7 bar, supply line min. 1/2''
Length: approx. 5600 mm
Width : approx. 1300 mm
Height: approx. 1900 mm
For this machine we can offer you a suitable
refeed device LIGMATECH ZHR 15, our item ID 2063879.
|
|
