| |
Technical data: |
1052 VTL SCM10000CNC
Main Technical Specifications:
Table (faceplate) diameter : 6000 mm
Maximum swing at Column Home position 6200 mm
Nominal turning diameter (max. dia. Turned 12500 mm
both from main head and side head):
Max. dia. of turning (max. dia. of component
admitted for turning on the machine with
extension arms applied and column in its
end position) : 12500 mm
Column Travel from home position to End Position : 3500 mm
Main drive motor power: 2 x 71 KW
Table loading : 250 tons
Table speed range (2 steps) : 0.8 to 27 rpm
Max turning height
(Considering the jaws and tool holder height,
clear 4500 mm height job should be
possible to machine) : 4500 mm
NOTE: The max. work piece height could be increased up to 5300 mm if the column bed and faceplate bed are fitted on different levels of foundation. In this case the foundation drawing will be delivered accordingly.
Vertical Travel of RAM main head Z axis : 2500 mm
Horizontal travel of main head X axis : 3375 mm
Main Head RAM cross section : 350 X 350 mm
Main head RAM tool section : 50 X 50 mm
Horizontal Travel of Side Head RAM X1 Axis : 1600 mm
Vertical Travel of Side head Z1 Axis : 2600 mm
Side head RAM Cross section : 250 X 250 mm
Working Feeds (X, X1, Z, Z1) 0.1 to 6000 mm/min.
Rapid traverse (X, X1, Z, Z1) 0.1 to 6000 mm/min.
Overall dimensions:
. Floor area (approx.): 17000 X 13000 mm
. Max height of the machine from floor level (faceplate is +200 mm
from floor level) with cross rail at max top end position : 12000 mm.
. Machine weight (approx.) : 210000 Kgs
. NOTE: In case of the max. work piece height will be chosen for 5300 mm, the max. height of the machine will become 12800 mm.
|
|
