| |
Technical data: |
Tl.-Id. 2049205
40 mm diameter of spindles in longitudinal contou)
with work sations and possibilities:
- one sided slit machine for straight and slant connections
- trimming machine with glass-strip dividing unit
for longitudinal profiling
- rebate operation with sybchronism milling unit and
immersion automatic, tiltable frame frence up to 650 mm
- fitting groove milling unit
- central control
specification / technical description
automatic cutting to length saw immersed from top
motor capacity, inclusive motor brake 3.0 kW, spindle rotation 2800 rpm.
cutting diameter 350 mm, spindle diameter 30 mm, pressing flange,
1 carrier 6 mm diameter, TK 42 mm, 120 mm diameter, pneumatic
vertical lift 100 mm, pneumatic horizontal lift against 2 manual
6-times revolver fences 160 mm, chip suction hood with suction nozzle
diameter 100 mm
slit unit
motor capacity inclusive motor brake 9,2 kW, spindle rotation 3800 rpm.,
cutting diameter max. 320 mm
spindle diameter 50 mm, spindle usable length 300 mm,
pneumatic vertical lift fixed 2 x 100 mm suitable for 3 gang tools,
zero height 10 mm, chip suction hood with nozzle diameter 160 mm
slit table
table height over ground 920 mm, feed automatic, with 2 speeds
slow 7 m/min., fast 14 m/min., motor capacity inclusive motor brake
0,21/0,3 kW, drive disconnectable for hand feed (bevel cut), pneumatic work-
piece clamping, 1 clamp cylinder with 2 additional pressure shoes
counter wood equipment
Counter wood changer with 2-fold automatic changer and manually adjustable
to 180 degrees, 2 additional lock counters possible, that likewise in an
automatic operation counter locks
length fence
Fence system with 3 stages, a) outer frame, b) outer sash upright,c) outer
sash diagonally, manual adjustable, length 2300 mm, for
slanting windows swivel +/- 60 degrees
lengthening up 1000 mm to 3300 mm
angular transfer
automatic over vertical cyclec feed roll in milling feed
milling machine
for longitudinal counter and rebate operation of windows/doors with the
following units:
- sychronism run milling unit with immersion automatic
- synchronism and counter run, immersion automatic useable for rebation,
motor capacity inclusive motor brake 7.5 kw, spindle rotation
6000 rpm., cutting diameter 240 mm max., side fences adjustable to zero
diameter of tools 140 mm max., 112 mm min., zero height 10 mm, spindle
diameter 40 mm, spindle usable length 100 mm, pneumatic horizontal
lift 80 mm, chip suction hood with suction nozzle diameter 120 mm
profile milling unit
running in opposite direction, motor capacity inclusive motor brake 9,2 kW,
spindle rotation 6000 U/min., cutting diameter 240 mm max.,
side fence adjustable for zero diameter of tools 140 mm max., 112 mm min.,
zero height 10 mm, spindle diameter 40 mm, spindle usage length 220 mm,
pneumatic vertical lift fixed 1 x 100 mm, suitable for 2 gang tools, chip
suction hood with suction nozzle diameter 140 mm
groove milling unit
running in opposite direction, motor capacity 4,0 kW incl. motor brake,
spindle rotation 6000 rpm., cutting diameter, profile depth 30 mm
( fitting groove depth) 200 mm fixed, zero height 10 mm, spindle diameter
40 mm, useable spindle length 100 mm, horizontal lift 80 mm, chip
suction hood with suction nozzle diameter 120 mm
glass strip sawing unit
counter run, motor capacity incl. motor brake 3.0 kW,
spindle rotation 3000 rpm., spindle diameter 30 mm,
spindle working length 15 mm, fly cirkle diameter 200 mm,
vertical stroke pneumat. 100 mm, pneum. cycled, glass trip
removal incl. flashback protector, chip suction hood with
suction nozzle diam. 80 mm
feed
motor capacity 0,75 kW, feed speed 8 m/min., feed roll diameter 100 mm,
roll spacing in field of operation unit 110 mm, field of drawing in 200 mm,
single feed roll adjustable slant to fence
Vertical right fence
Height 85 mm, fence 1 for 1 mm chip removal adjusted,
fence 2 pneumatic cycled for zero - 1 mm chip removal.
adjustable for zero diameter 112-140 mm
Workpiece reverse equipment
- Good overview of centralized operation table with standard operation
and partial automatic in slit- and profile milling unit
(3 programs for outer frame production)
- Single- and interconnection with automatic angle delivery function
- With rebate operation switch inclusive 4-way operation
- Groove unit for edge transmission mill is per button operational
- glass strip dividing saw unit incl. pneum. cycled
guide rail which can be added by press button
- easy understandable, logical built on handling of operation
Workpiece dimensions
- Slit unit: length min. 200 mm + tenon
width min. 42 mm, max. 200 mm
thickness min. 42 mm, max. 80 mm
- Milling unit: length min. 220 mm + tenon
width min. 42 mm, max. 200 mm
thickness min. 42 mm, max. 80 mm
- Rebate unit: frame length min. 400 mm
technical connection data:
air pressure connection 3/8'', 8 bar
air pressure consumption ca. 40 NL/min.
(air Pneurop 6611)
air suction quantity 135 m3/min.
air suction speed 32 m/sec.
operating voltage 3 phases, 380 Volt, 50 cyc
electrical connection total 38,0 kW
electrical equipment according to VDE
|
|
