| |
Technical data: |
Tl.-Id. 2043675
for the production of windows and doors
(40 mm spindles in longitudianl profiling)
with the following processing stations and
possibilities:
- single-sided slot mortising machine for
straight and oblique connections
- milling machine with glazing bead cutting unit
for longitudinal profiling
- rebate operation with synchronized milling
unit and dip automatic
- swivell frame overlay up to 650 mm
- SPS central control
specification / technical description
1.0 bucking saw, autom. dip in from the top
- motor capacity incl. motor brake 3,0 kW
- spindle rotations 2800 rpm
- cutting diameter 350 mm
- spindle diameter 30 mm
- pressing flange, 1 carrier 6 mm, TK 42 mm, 120 mm diam.
- vertical lift pneum. 100 mm
- horizontal lift pneum. 160 mm
against 2 manual 6-times revolver fences
- chip suction hood with suction nozzle, diam. 100 mm
2.0 slit unit
- motor capacity incl. motor brake 9,2 kw
- spindle rotations 3800 rpm
- cutting diameter 320 mm
- spindle diameter 50 mm
- spindle usage length 300 mm
- vertical lift pneum. fixed, suitable for 3 sets of
tools 2 x 100 mm
- zero height 10 mm
- chip suction hood with suction nozzle, diam. 160 mm
3.0 slit table
- table height over ground 920 mm
- feed automatic, with 2 speeds
- slow
- fast
- motor capacity incl. motor brake 0,21/0,30 kW
- drive uncoupleable for manual feed (longitudinal cuts)
- work piece clamping pneum.
- clamping cyinder 1 pc. with 2 additional clamping shoes
3.1 counter wood equipment
- counter wood changer with 2-fold automatic changer
and in case of manually turning of 180 degrees,
2 additional loch counters possibles, which also
counter locks in automatic operation
3.2 length fence
- fence system for
a) blind frame outside
b) sash outside horizontal
c) sash outside cross
- manual adjusting
- length 2300 mm
incl. extension by 1200 to 3500 mm
- for inclined windows tiltable +/- 60 degrees
3.3 angular transfer
- automatic over vertical cycle feed roll in
milling feed
4.0 milling unit
- for longitudinally profiling and rebating
of windows/doors with the following units:
4.1 profile milling unit
- running in opposite direction
- normal running with dip-in automatic suitable
for rebate
- motor capacity incl. motor brake 9,2 kW
- spindle rotations 6000 rpm
- cutting diameter 240 mm max.
- spindles adjustable for zero diameter of
tools 140 mm max., 112 mm min.
- zero height 10 mm
- spindle diameter 40 mm
- spindle usage length 200 mm
- vertical lift pneum. fixed, suitable for
2 sets of tools, 1 x 100 mm
- horizontal lift pneum. 50 mm
- chip suction hood with suction nozzle, diam. 140 mm
4.2 profiling milling unit
- running in opposite direction
- motor capacity incl. motor brake 9,2 kW
- spindle rotations 6000 rpm
- cutting diameter 240 max
- spindles adjustable for zero diamter of
tools 140 mm max, 112 mm min.
- zero height 10 mm
- spindle diameter 40 mm
- spindle usage length 200 mm
- vertical lift pneum. fixed, suitable
for 2 sets of tools 1 x 100 mm
- horizontal lift pneum. 50 mm
- chip suction hood with suction nozzle, diam. 140 mm
4.3 profiling milling unit
- running in opposite direction
- motor capacity incl. motor brake 9,2 kW
- spindle rotations 6000 rpm
- cutting diameter 240 mm max.
- spindles adjustable for zero diameter of
tools 140 mm max., 112 mm min.
- zero height 10 mm
- spindle diameter 40 mm
- spindle usage length 200 mm
- vertical lift pneum. fixed, suitable for
2 sets of tools 1 x 100 mm
- horizontal lift 50 mm
- chip suction hood with suction nozzle, diam. 140 mm
4.4 glas strip unit
- running in opposite direction
- motor capacity incl. motor brake 3,0 kW
- spindle rotations 3000 rpm
- spindle diameter 30 mm
- spindle usage length 15 mm
- cutting diameter 200 mm
- vertical lift pneum. 100 mm
- pneumatic cycled
- glass strip lead-away incl. non-retun figer device
- chip suction hood with suction nozzle, diam. 80 mm
4.5 feed
- motor capacity 0,75 kW
- feed speed 6 m/min
- feed roller diameter 100 mm
- roller distance in the field of processing units 110 mm
in the field of infeed 160 mm
- feed rollers individually adjustable slant to fence
4.6 vertical right fence
- height 85 mm
- fence for 1 mm chip removal adjusted
- fence 2 and 3 pneum. cycleable
5.0 work piece return device
- The finshed processed panels comes back to the
operator over a inclined roller conveyor
6.0 SPS-central control
- electronic free programmable processing
for - 60 individual programmes
- 40 combi programmes
- 1 combi programme, max. 8 steps
(= panels) correspond 1 one-sashed window
clear text display via 2-cell-display
- single- and combound operation with automatic
angle transfer function
- easy, plain, reasoned handling of control
7.0 work piece dimensions
slit unit: length min. 200 mm + tenon
width min. 42 mm, max. 200 mm
thickness min. 42 mm, max. 80 mm
milling unit: length min. 220 mm + tenon
width min. 42 mm, max. 200 mm
thickness min. 42 mm, max. 80 mm
rebate unit: frame length min. 400 mm
8.0 technical connection data
- compressed air connection 3/8'', 8 bar
- air pressure consumption approx. 50 NL/min
(air Pneurop 6611)
- air suction quantity 152 cbm/min.
- air suction spped 32 m/sec.
- operating voltage 3 phases, 380 Volt, 50 Hz
- total connected load 44,0 kW
- electrical equipment
according to VDE 0113
- loading weight approx. 4100 kgs
|
|
