SUPER GUENSTGE profile bending machine HUVEMA MIP 30, 14.1094 HUVEMA, MIP 30 HV, , profile bending machine to the Hirizontal/Vertikat treatment engine performance 0.75 KW of Wellendurchm. 30 mm of Walzendurchm. 118 - 148 mm of numbers of revolutions 20 rpm weight 170 kg AD-ID: A72651 More Infos click here
quadruple komb. Iron sections working machine , PEDDINGHAUS, Peddy, , angles + T with 90:
60 x 7 mm of angles + T with 45: 50 x 6 mm square: 22 mm of round: 25
mm flat steel bar: 100 x 10 mm AD-ID: A433148 More Infos click here
Iron sections working machine Peddy , Peddinghaus, Peddy, , iron sections
working machine Peddy engine/mechanical execution, with releasing
mechanism (without hollow punch) punching strength approx.. 30 ton
standing on turning landing, machine NR. 4061253678173 AD-ID: A391919 More Infos click here
Flat, profile and rod steel scissors , Peddinghaus, Modell 210 SUPER II, , stroke rate profile steel scissors about 42 minutes, punch hole stroke rate of about 42 minutes, power needs about PS 3, foundation mm Height 510, unloading the hole puncher mm 305, super-word telegram 11, net weight without motor kg 1130, net weight with motor kg 1150, gross weight without motor kg 1160, gross weight with motor kg 1180, crates mass for Lake dispatches about cm 137x65x130 AD-ID: A452167 More Infos click here
CNC Bending center, PBT - Indumasch, 25, , CNC profiles bender PBT 25 - Make. PBT Indumasch - Swiss - type. 25 - Mach.No. 130 - Age. 1996 - Capacity X axis. 27 t - 3 roll driven - Speeds. From 1 24/m/min. -- Torq moment. 1,600 Nm. -- Shaft. 105 mm - Stroke. 265 mm - Max height roll. 300 mm - Hydraulic Power X axis. 3.0 kW - Roll Power. 3 x 1.1 kW - BC 100 Control - Dimensions: - W L x x H. 1.48 x 1.2 x 1.36 - Weight. 1.1 t - Capacity: mm x min. -- Flatt. 50/10 x 300 - Flatt. [...Technical data truncated] AD-ID: A455896 More Infos click here
Motorized Ring and Profile Benders Weipert RBM, , , Motorized Ring and Profile Benders
Cost-Effective Ring and Profile Benders for universal trade applications
millimeter scale for roller adjustment
ground drive shafts with double support provided by cone bearings at both ends
one-piece gliding central block mounted on hardened crosshead
mechanical feed, 2 driving rollers, horizontal and vertical application
Standard Equipment:
standard rollers
1 set wrenches
Specifications RBM 30
Ø of shafts mm 35
Ø of rollers mm 132/137 roller speed min-1 2.1
motor rating kW 0,75
weight kg 185
length mm 670
width mm 530
height with base mm 1350
Part No. 130 158
Price € 2.280,-
, AD-ID: A334294 More Infos click here
Combined Section Shear with Punch Unit , Peddinghaus, Peddimax 801, , The machine is in very good condition and may at any time in our power to be visited. Accessories: large Stanzwerkzeugpaket attack with electric trigger for attack Scherstation system WBL 533-plus technical data: round steel 50 x 25 mm square steel 50 x 30 mm angle steel 150 x 12 mm Schnittl. -- Rectangle 500 x 18 mm print 100 tonnes hole-in Blechst. 31 in 25 mm Gesamtleistun [...Technical data truncated] AD-ID: A465506 More Infos click here
Profile bending machine bending machine , Herkules Wetzlar, BO 239 N-1, , Herkules BO 239 N-1 Masch.Nr.72479 Year of construction 1973 2 propelled rollers Advance run 2 run speeds 150mm roller adjustment Diameter of the roles: 230 mm of angle: 65 x 7 mm 380 V Total output need: approx. 4 KW Machine weight: approx. 1400 kg AD-ID: A390300 More Infos click here
Ring and Profilbender Weipert RBM 30, , , Motorized Ring and Profile Benders
Cost-Effective Ring and Profile Benders for universal trade applications
• millimeter scale for roller adjustment
• ground drive shafts with double support provided by cone bearings at both ends
• one-piece gliding central block mounted on hardened crosshead
• mechanical feed, 2 driving rollers, horizontal and vertical application
Standard Equipment:
• standard rollers
• 1 set wrenches
Specifications RBM 30
Ø of shafts mm 35
Ø of rollers mm 132/137 roller speed min-1 2.1
motor rating kW 0,75
weight kg 185
length mm 670
width mm 530
height with base mm 1350
Part No. 130 158
Price € 2.280,-
, AD-ID: A404767 More Infos click here
Profiliermaschine , DREISTERN - neuwertig, P802N / P3.080.02, , 2 piece of machinery with rolling tools for U-profile, Schlaufensteürung, 2.2 kW. "aür-machines.com" AD-ID: A348341 More Infos click here
entry width
1.650 mm
available roll sets ( see encl. )corrugated sheet 18/76
trapezoidal sheet 28 / 137
trapezoidal sheet 45 / 160
material thickness ( pending on profile form ) max. 2 mm
coil- max. 1.900 mm
coil weight max. 8 t
stacking length
max. 22 m
stacking weight
max. 2 t
speed
max. 60 m /min.
working direction
right left
space requirement
approx. 35 x 8 m
Prifilbiegemaschine , BIRLIK, PBM 35 mit Digitalanzeige, , Voltage 400 volts, 3 phase, 50 Hz spindle diameter 50mm roll diameter 155 mm drive power 1.5 kW speed 3.6 m / min Dimensions 933 x 730 x 1400 mm Weight 435 kg accessories: rolls hardened mechanical side attacks Horizontal and vertical Working possibility digital display for Upper role foot pedal with safety button AD-ID: A460592 More Infos click here
Roll forming machine Ref. 9232, GRIEBEL, PW 15.8, Fabrik-Nr. 550, 150 x 1 mm, 10 stations, diam.of the stations 35 mm, high of the profil 20 mm, speed 0 - 20 m/min., between shafts horizontal 285 mm, between shafts vertical 130 mm. , AD-ID: A447430 More Infos click here
9235 roll forming line , NAGEL, , 400 x 2 - 2,50 mm, 20 Stations, diam. of the stations 40 mm, v = 3 - 30 m/min., between shafts horizontal 350 mm, vertical 160 mm, high of the profil 50 mm, with decoiler, leveller etc., AD-ID: A437940 More Infos click here
Profiling machine with elek. Längseinrichtung , Schlebach, SPM 30/80 LM HYT, , Used Schlebach-profiling machine without coil cars, Maschinennr. 0291773, machine with electronic length measuring device by Segmentmesserqürteilanlage mobile hydraulic steering wheels to 4 AD-ID: A456460 More Infos click here
Profilbiegemaschine , BIRLIK, PBH 40, , Technical data: Voltage 400 volts, 3Phasen, 50 Hz spindle diameter 45mm roll diameter 155 mm drive power 1.5 kW speed 3.9 m / min dimensions 1000 x 700 x 1380 mm Weight 600 kg accessories: rolls hardened mechanical side attacks Horizontal and vertical working on the possibility Steürpult trolley digital display for the upper roller AD-ID: A460579 More Infos click here
Handbend to hand stamping machine , MUBEA, Handbiege 5 SN/10 R Handstanze 22 N/16, , hand bends 5 SN/10 R cuts: to 10
m flat irons: to 80 x 13 O to 22 & 9608; until 20 L to 60 x 7 T to
60 x 7 hand stamping machine 22 N 16 rund:bis 16 mm rechteckig:10 mm
the stamping machines is together besfestigt on a werktisch. AD-ID: A374445 More Infos click here
saw and drilling line, Kaltenbach, KBS 1001/KBD 1003, compl. Kaltenbach saw and drilling line
- year 2001 very low hours
- in and out feed rollerways 18 m
- crosstransfers both side, AD-ID: A467851 More Infos click here
Profile bending machine , BPR, C 602 H, , Wave diameter 60 mm, roller diameter 225 mm, work height 950 mm, drive power 2.2 KW, Oberwalze hydraulically adjustably, bending achievements: Channel UPN 120, square 70 x70 x 3 mm, L - pipe 70 x 70 x 8 mm, pipe to 3; little used machine AD-ID: A407551 More Infos click here
Profilbiegemaschine , BIRLIK, PBM 30 mit Digitalanzeige, , Voltage 400 volts, 3 phase, 50 Hz spindle diameter 30mm roll diameter 128 mm role-distance 275 mm drive power 0.9 kW speed 1.8 and 3.6 m / min Dimensions 800 x 700 x 1200 mm weight 214 kg accessories: Hardened roles Mechanical side attacks Horizontal and vertical working Option 2 speeds foot pedal with safety button AD-ID: A460589 More Infos click here
Profile bending machine , Swisstool, , , Shaft diameter: 65 mm roll diameter: 180 mm angle iron leg length x thickness = approximately 65 x 7 mm flat iron at the high edge: 60 x 12 mm square steel: about 35 x 35 mm total power requirement: about 4 KW / 380 Volt Machine weight: about 1400 kg AD-ID: A415473 More Infos click here
Processing center , ALTECH, RUMBA , , The processing center RUMBA was introduced exclusively on the May countries fair and was exceeded all expectations. This machine is a demonstrating machine and now approx. 3 months old. Technical data of the RUMBA: CNC milling center more fuer aluminum, PVC, and treatment of steel. With electronically swivelling workbench (0 90 - 90 inclusive. all intermediate angle the control likewise by CNC takes place there). Treatment of the workpiece of several sides without renewed clamping! The operational sequences of the X, Y and Z axle steered likewise completely CNC. Automatic zero value correction. 7 tools, which change time-saving. A tooth drills, disk millers and Gewindeschneider change themselves automatically and make an effective treatment possible of the workpiece. Here it is all the same whether you to PVC, aluminum or works on steel. The number of revolutions of the milling spindle is steplessly adjustable! The machine is equipped with an electrical spindle (4kW, 18,000 rpm.) and with ISO 30 photographs. The X, Y, Z and W axles are operated by servo actuators, whereby an absolutely exact and noiseless treatment are possible. Waehrend of the enterprise protects the complete protection hood from the outside against intervention and ensures a safe working. The distribution takes place completely with 4 pneumatic material stresses with double operating pressure. Work areas: X=3000 mm*, Y=400 mm, Z=300 mm Total weight: 2650 kg By concealable attacks (on the left and on the right) material can be worked on, the 4000mm is long. CONTROL: The controlling of the Rumba is a PC control on WINDOWS basis. The software provided AXA-CAD can read in and process all usual data formats. Provide job orders directly on the control or feed you to data over the integrated network map or the USB connection. Accessories PROVIDED: 1 spindle ISO 30 1 drill 8 mm of 1 clamping device 8 mm of 4 pneumatic material stresses of 3 extendable splinter containers Sprueheinrichtung service unit blow-out gun operating key Option: Micro spraying mechanism additional material stress clamping device with different diameters tool with different diameters releasing drill thread gumption essay etc. AD-ID: A420143 More Infos click here
Profilbiegemaschine serious Biebemaschin , AP, 230, , -top role d = 230 mm lower role d = 100 mm max distance lower rolls 720 mm AD-ID: A465431 More Infos click here
Profile bending machine, Herkules , BO 238 N, , 2 Next driven rollers return 2 Current speeds material: 50mm x 7mm AD-ID: A452195 More Infos click here
Profile bending machine , Zopf, RS 302 ME, , profile bending machine ZOPF type R-S
302 ME (E.G. 60 M), Masch.Nr. ZB95107S, Bj. vermutl. 1997, wave
diameter 30 mm, roller diameter 132 mm, weight 140 kg, LxBxH
530/670/630 mm, with 2 propelled rollers, manual feed of the upper
roller, without standard rollers, with underframe, with 1 set of
kunststoffwalzen for pipes DM. 25 mm (disk DM 125 mm), 1 set of
kunststoffwalzen for pipes DM 35 mm (disk DM 1x120 mm, 2x75 mm), 1 set
of steel rollers (disk Dm.x H 125/25 mm), 1 set of steel rollers (disk
Dm.x H 65/15 mm), 1 set of steel rollers (disk Dm.x H 65/12 mm), uses,
in very good condition AD-ID: A430098 More Infos click here
Profile steel scissors - punching combination hydraulic , Kingsland, 85S, , cutting capacity: about 50mm square 50mm flat 380x20mm 480x15mm angle steel 90, 150x15mm 45, 70x100mm line drive very robust 7.5 kW machine with integrated hydraulic unit, foot switches, electrical length attack does not exist, but can be upgraded. Scissors and punch can be used in parallel. AD-ID: A461240 More Infos click here
