Extrusion plant for thermoforming sheet from A-PET, BARMAG, , 90 mm and 60 mm extruder
with hydr. filter and
new melt pump,
with 1350 mm T-die,
flexlip 0,2 - 1,5 mm
with 1400 mm polishing stack,
horizontal designed
with edge-trim device, nip-rolls,
winder
Optional : feeding, dosing,
edge-trim grinder,...
, AD-ID: A282515 More Infos click here
extruder, PMH, Ex 115-32d, single-screw extruder with venting,
screw diameter 115 mm - 32 L/D,
DC-motor 163 kW, new gear box,
new ceramic heaters,
new cooling blowers,
new machine base,
complete machine new installed, new control cabinet, AD-ID: A303805 More Infos click here
Film blowing unit, Maschinenbau Heilsbronn GmbH, , Complete line for the production of 3-layer blown film from PA-HV-PE Working width 500mm. Extruder with head mounted at oscill. platform. Winder with fully automatic roll transfere.
, AD-ID: A299359 More Infos click here
haul-off for pipes Graewe 4 belt Graewe BA 125/4 , , , manufactor:Graewe/Germany type: BA 125/4 year:1992 4 belts range: 16-160mm length of belts 1600mm 4kw compatibly with our Graewe pipe saw. They were used in the same pipe extrusion line , AD-ID: A417320 More Infos click here
Film blowing plant, HBM, , Extruder 50mm screw diam. with die head and air cooling ring. Puller and winder mounted at rotating frame. Working system from above to below. Reconditioned, AD-ID: A175892 More Infos click here
extruder 120 mm, COVEMA, 120 mm - 30 L/D, single-screw extruder
120 mm- 30 L/D with new screw,
150 HP DC-motor,
new installed control cabinet
with new motor controller,
function tested
, AD-ID: A318148 More Infos click here
single Extruder 50mm Welex, Johnson, , manufactor: Welex screw diameter: 50mm screw length: 24D complete with electric control cabinet only a few ours in work.good condition!
visitable in our stock 48308 Senden , AD-ID: A401448 More Infos click here
Extruder screens type HSP 65/27 , siebe, Typ HSP 65/27 , , extruder manufacturer Siebe type HSP 65/27 (65x27D) Built 1992 snail: 65mm screw length: 27 mm output capacity: up to 130 l / h Heater: 22 27 kW drive: 30 50 kW cooling pools, vacuum pump Volume and deduction is available on request with offers. AD-ID: A449369 More Infos click here
Extrussonslinien , EXTRUDEX, ED 110-25 D, , EXTRUDING LINES Ektruder manufacturer: EXTRUDEX
year of construction 2000 type: OD 110-25 D snail diameter: 110
length: 25 D CALIBRATION TABLE manufacturer: EXTRUDEX type: EDKT 3000
year of construction: 2000 CRAWLER-TYPE VEHICLE DEPARTURE
manufacturer: EXTRUDEX type: OD RA 120 year of construction: 2000
PRECISION SAW manufacturer: EXTRUDEX type: HP of 400 year of
construction: 2000 AD-ID: A397457 More Infos click here
Blow Film Plant, TECOM, E40, , manufacturers: TECOM type: E40 year of
construction: 1987 snail: 40.30D nozzle: 120 mm foil width: 80 - 800
mm of folienstaerke: 12 - 150 m departure with guidance rollers
Abzugeschwindigkeit, adjustable of 0 - 75 m/min rolling up: 2
stationstation stations AD-ID: A422614 More Infos click here
Extruder screens type HSP 38/28 , Siebe, Typ HSP 38/28 , , Type HSP 38/28 (38x28D) Built 1992 snail: 38 mm screw Length: 28-30D output power: - 45 l / h heating: 7.1 9.5 kW drive: 4.8 7.5 kW AD-ID: A449382 More Infos click here
Extruder Krauss Maffei , Krauss Maffei, , , KRAUSS-MAFFEI extruder equal Ongoing Compoundierextruder 81 mm twin-screw Baujahr.2002 cylindrical, about 2790 h-performance 500-600 kg / h procedural unit: - Make BERSTORFF, 81 mm, L / D 26 - Maximum speed 300 1/min - Protected wear segment snail - screw geometry and wear protection for the long glass fiber processing - in shared cylinder flange design - cylinder with degassing opening - Additional 2nd Opening in cyl [...Technical data truncated] AD-ID: A452654 More Infos click here
Extruder, Extrudex, 48 – 30 D, Extruder, Manufacturer: Extrudex, Type 48 – 30 D The Extruder consists of three components:
1) Plasticizing device with gear and direct current motor 25KW
Screw diameter 48mm
Screw diameter 0-150 dr/min
4 cylinder heating zone with blower
Extrusions height 1000mm
Output approx. 70 - 80kg/h with HDPE 2) Base frame, designed as welded construction
3) Control panel with all necessary operating elements and temperature controller
, AD-ID: A311513 More Infos click here
Filmblowing extruder, Kiefel, KR 40, Filmextruder "Kiefel" 40mm screw diam. with blow head 120mm, air cooling ring "Alpine" (Insert for die and airring with 80mm diam.)
El. switch cabinet. mounted at oscill. platform, AD-ID: A299424 More Infos click here
Blown film plant, coex, Reifenhauser, Reicofol, 5-layer blown film line for PA (Nylon) of Metallocene film structures.
max. 110 kg/h,
1200 mm oszillating haul-off,
1400 mm tandem winder,
gravimetric dosing systems,
complete plant, still in production, AD-ID: A422363 More Infos click here
, Troester, 90x25D, , Bj 1983 associated switchgear cabinet,
operating sector, documentation single extrusion: Manufacturer
Troester type 90x25D year of construction 1983 associated switchgear
cabinet, operating sector, documentation technical data: I. Mechanical
part: Snail diameter 90 mm schneckenlaenge 25 D snail numbers of
revolutions with max. 75 rated load torque of the engine min 3.75
length of the cooled funnel zone 2 D capacity of the funnel of 140
litres of reduction transmissions type 2 TH 480 HP of translation 10.5
oil contents of 50 litres of II. Drive: Operating voltage: U = 380 V
d.c. 50 cycles per second - direct current shunt-wound electric motor
type GV 180. 34 M make emperor Leistung N = 55 KW of number of
revolutions n max. n = 1500 min. Range of control R = 10 - v-belt
drive: Engine narrow V-belt pulley D = 236 mm, 6 rillig transmission
narrow V-belt pulley D = 450 mm, 6 rillig narrow drive belts type 6 x
Prof. SPB x 3000 Lw - lubricating oil pump reduction transmission: Short
circuited rotor engine type EF- N1 make: Sugo achievement N = 0.55 KW
of number of revolutions n = 1400 min III. Heating filament voltage U
= 380 V d.c. 50 cycles per second of number of heating zones z = 9
amount of heat zone 1 N = 6 KW of zone 2 N = 5.4 KW of zone 3 N = 5.4
KW of zone 4 N = 5.4 KW of zone 5 N = 5.4 KW of zone 6 N = 6 KW of
zone 7 N = 4.8 KW of zone 8 N = 1.3 KW of zone 9 N = 1.3 KW of IV.
Cooling number of cooling zones of 4 cooling air fans type CLOSELY
flow rate V = 7 m min. Static pressure p = 37 mm WG achievement N =
0.1 KW of number of revolutions n = 2750 min AD-ID: A382412 More Infos click here
Chillroll plant 2200 mm, REIFENHÄUSER, , 120 mm extruder 30 L/D
2000 autoflex T-die
2200 mm chill roll, diam. 800 mm
complete up to auto. winder
and edge trim refeed system, AD-ID: A328635 More Infos click here
Extruder WEBER 80mm, , , single Extruder WEBER 80mm
screw length:20D
good condition.
if you are interested yust contact us. always visitable, AD-ID: A387656 More Infos click here
Co - extruder, , , Screw diameter: 22 mm
Screw length: 350 mm
Zylinder without degassing
Motor type DKF 94V 10/215, 220/380V, 1,5 PS
Speed adjustment over altering transmissions
Extrusion height of hand adjustable, AD-ID: A426480 More Infos click here
Foil blowing plant , ALPINE, HS 35, , screw diameter 35 mm L / D 16/14, output: 80-90kg HDPE / h 34 kW, 360 degrees, blown head: 80-350 mm Winders: 1300 mm AD-ID: A405034 More Infos click here
Flat foil blowing plant , Barmag komplette Linie zur Folienherstellung, , , extrusion equipment for foil
production consisting of: 2.0 pieces overhauled bar-like
extrusion, year of construction 1981, outdated into years 2005 2.0
pieces of fusion pumps 2.0 pieces of layer adapters 1.0 pieces
wasserbad 1.0 pieces of departure unit 1.0 pieces of embossing unit
1.0 pieces of corona pretreatment unit 1.0 pieces of laminating
station with cut unit 1.0 pieces of rolling up unit used inclusively.
Dancers 1.0 pieces of control fuel corner & pure 1.0 pieces used
unlubricated air dryer 1.0 pieces used cooling system 1.0 pieces of
gumption mill Divrese spare nozzles. Please you request the detailed
offer with pictures. AD-ID: A390942 More Infos click here
Complete CoExtrusionsanlage extrusion , Reifenhaeuser Siebe , diverse Typen, , 3 subject
CoExtrusionslinie extrusion manufacturer of tire houses type
RH-381-1-70-25 (70x25D) Bj 1982 Durchmesser:70mm length: 25 D speed
range: 10.9-109 min screw cooling: no snail cylinders: Number of
heating zones: 3 number of cooling zones: 3 amount of heat: 15.6 KW of
kind of the cooling: Air fan speed: per zone 0.14 KW of shielding
cooling: Water cylinder heating element: 3.5 KW funnel contents: 80
litres extrusion manufacturer of filters type HSP 65/27 (65x27D) Bj
1992 snail: 65mm schneckenlaenge: 27 mm of output achievement: to 130
l/h amount of heat: 22 27 KW of drive power: 30 50 KW extrusion
manufacturer of filters type HSP 38/28 (38x28D) Bj 1992 snail: 38 mm
schneckenlaenge: 28-30D output achievement: - 45 l/h amount of heat:
7,1,9.5 KW of drive power: 4,8,7.5 KW type of material: PE/TPE
Compounds type of material adhesive: Macromelt TPX 239/241
Anlagengeschw: 50 m min Produktionsgeschw: 25m/min diameter: 1, 6 - 12.7 mm of wall thickness pipe: 0.7-4.0 mm of Wanstaerke
adhesives: 0.3-0.4 mm of switchgear cabinets and plant control
completely, documentation tubing head, various polymer snails cooling
bath manufacturer of tire houses type KKE-R0063 of 3.0 meters of Bj
1983 of 3 cooling baths (1x Vacuumbad, 2xSpruehbad) manufacturer of
tire houses type KKE-RO-125-03 ever 4.3 of meters of Bj 1980 volume
departure manufacturer VOBAU type approx. 100x800mm AD-ID: A382406 More Infos click here
Pipe extrusion line 20-125mm , , , Pipe extrusion line 20-125mm
composed of Trusioma Extruder 60mm/25D manucatort:Trusioma screw: 65mm/25D Motor:55kw year:1989 with cooling and heating zone and electric control cabinet.
(avalaible with other Extruder,too!!!)
pipe haul off manufactor: Graewe type: BA 125/4 year:1992 number of tracks: 4 max.pipe size: 125mm
pipe saw STS 125 Manufactor: Graewe Germany year:1992 Pipe range : 20-125mmm with documentation and extra knives , AD-ID: A421482 More Infos click here
pipe saw Graewe STS 125 Graewe STS 125 , Graewe, , Manufactor:Graewe Germany year:1992 Pipe range : 20-125mmm this pipe saw is in condition like new, with new knifes. evertime visitable in our stock in 48308 Senden.More extrusion machines available , AD-ID: A421480 More Infos click here
masterbatch/compunding Leistritz extrusion line , Leistritz, , Leistritz Twin Screw Extruder ZSE 65 /Parallel
type: ZSE 65 Parallel
Manufacturer: Leistritz Germany
year: 1979
masterbach-compound screw: 65mm - L/D 24
7 heating zone, 4 with blower cooling
vakuum outgassing
motor: 25kw
with strand die head
output: 80-125kg
+ water bath
+ Scheer Granulator SGS 100
year: 1988
Typ:SGS 100motor: 4 kw
optional available with a continous Kreyenborg screen changer
output of this line: 250-300kg/h, AD-ID: A430906 More Infos click here
single Extruder 50mm Welex Welex , , , manufactor: Welex screw diameter: 50mm screw length: 24D complete with electric control cabinet only a few ours in work.good condition! visitable in our stock 48308 Senden , AD-ID: A415275 More Infos click here
Vacuum tank calibration, G&G Extrusionstechnik GmbH, Battex VA 63/2, Potash Brie pure direction for hollow chamber profiles (ø max. 63 mms) with running around chill spray bath.
The maximum subpressure lies with-0,7 cash.
The tank adjustable by the height, stands on a rail and disposes of a position control.
The device is as good as new and shows only minimum use tracks, the company term amounts approx. 100h. Scope of supply: - Vacuum tank
- 2 Kalibrierhülsen(16 mms,24 mms)
- rail with position engine, AD-ID: A431550 More Infos click here
Regranulieranlage Recyclinganlage , Thyssen Henschel, Typ 160 / N und Typ 120 / N, , Offer 2 plants: In addition plant 1 achievement 640.0 KW with plugging work and cooling stretch year of construction 1992 Linie2 achievement 480.0 KW with plugging work and cooling stretch year of construction 1992 e.g. offers spare parts for this Analge to BigBag racking plant, dryer T1008 harsh old, rotary screen, Friktionswaeschler etc. of approx. 6-7 complete double trains (13,6m) AD-ID: A429301 More Infos click here
5-layer Blown Film Line, BARMAG-D, BF4 BAROFLEX, 5-layer machine 2006 reconditioned
Machine width 1600 mm
3 x 60 mm/1 x 45 mm Extruder; motors Siemens
Rotary die head 360°
Die diameter (complete heads)
400 and 500 mm
Processable materials for barrier film
Calibration; flattener and haul-off hight adjustable
Double winder back-to-back; winding shafts 152 mm
Longitudinal slitting and trimming unit
Web guide
Corona treater Sherman
Dosing/control Plast Control; material suction unit for each extruder, AD-ID: A443715 More Infos click here
Spin-Draw Machine, Barmag, IDM60, Equipmentlist Barmag Spin-Draw Machine Type "IDM60" construction date 1996, Project number P1/5683 The plant was initially bought as a pilot plant for PA6.6 high tenacity yarns, but was modified in 1999/2000 to make PET and PEN yarns Following Features: BigBag + Octabin transfer station with preparation container for ca. 1,5t polymer Chip sucktion conveyor system Mann & Hummel Polymer dryer Mann & Hummel 800l Extruder Barmag 7E10 Put through amount 35 - 75 Kg/h 3 Spin pump drive Barmag(2 channell-spin pumps)
6-fold spinning head Barmag SP46 - 6 Spinnerets Wetzel 35, 47, und 70 holes Section 120mm 22 spinning packages available
After heater (Annealer)
Barmag Length: 400mm (untill 400°C) Quench air system
Barmag cooling and heating possibile 1. Spinnfinish
Barmag Kissroll 2. Spinnfinish
Barmag Kissroll and Finger
available but dismantled 1. double godets
Barmag GI30 cold 2. double godets
Barmag HF7/GI40 heatable DPL (Draw-Point-Localizer) Honeywell
vapour jets for 6-fold ends, further drawing process 3. double godets Barmag HF7/GI40 heatable 4. double godets Barmag HF8/GI41 heatable 5. double godets
Barmag HF7/GI40 heatable Overrun Roll
Barmag GI30 cold
Filement Monitoring (Fraytec control) Enka Intermingling jets
Enka 3. Overspinnfinish applicators(overfinish) Filament breakage monitoring Barmag Winders (6-end and 3-end)
Barmag 1 x CW6I-1200/6
and 1 x CW6I-900/3 (from 2500 to 6000 m/min)
manual doffing
Dowterm system Barmag Yarn types PET
290 dtex f35, 440 dtex f70, 550 dtex f70, 1100 dtex f140, 1440 dtex f140, 1670 dtex f210, 2200 dtex f210
High Tenacity and Low Shrinkage
Extruder Reifenhäuser type RH-381-1-70-25 , Reifenhaeuser, Typ RH-381-1-70-25 , , manufacturer Reifenhäuser type RH-381-1 to 70-25 (70x25D) Built 1982 snail: diameter: 70mm Length: 25 D speed range: min 10,9-109 snails cooling : No screw barrel: Number of heating zones: 3 Number of cooling zones: 3 Heater: 15.6 kW kind of cooling air blower power: 0.14 per kW Abschirmkühlung zone: water cylinder radiators: 3.5 kW funnel content: 80 liters Drive: Engine: 225 FGL / 20 4 engine power: [...Technical data truncated] AD-ID: A449353 More Infos click here
Styropor Reycling/granulation line , , , complete extrusion line to recycle Styropor
Extruder manufacturer: Diamat Germany
with cooling roll and all folowing machinery
complete with all zyklon
bj: 1991
working hours: 12.000
it is complete producing line like on the picture., AD-ID: A430908 More Infos click here
Berstorff double snails extrusion CPU 60 A , Berstorff, , , double snails
extrusion Berstorff CPU 60 A manufacturers: Berstorff type: CPU 60 A
Bj: 1985 snail diameters: 63mm L/D: 29D drive: DC 111 KW of snail
number of revolutions 400 U/min characteristics: Vacuum degassing,
combination housing for Sidefeeder, exchange transmission 2006, new
switchgear cabinet with SPS control S7 and DC static frequency changer
in the year 2003. For the procedure unit 2006 an abrasion measuring at
the procedure part were accomplished. Measuring report is present. AD-ID: A430912 More Infos click here
Profile saw battery field SPR of 32 , Battenfeld, , , manufacturers: Battery
field type: SPR 32 year of construction: 1988 achievement: 1.1 KW
sawing cross section: 40 x 40/30 x 100 height: 1000 to 1300 mm AD-ID: A430917 More Infos click here
Single screw extruder, Cincinnati, CMS 120-28G, Single screw extruder
Manufacturer: Cincinnati
Type: CMS 120-28G
Year of building: 1995
Screw diameter: 120 mm
L/D ratio: 28
Power: 260 kW
, AD-ID: A455188 More Infos click here
