Heating/Coolingpress, Sennerskov, 9H-4130-4-3-H/C, , Sennerskov el-hydraulic
PLC-COMPUTER-CONTROLLED fully automatic heating/cooling press
completely with all accessories with pat. Chamber plates from steel
laid out with all pipes and flex. Tank hoses etc. for the heating by
means of steam and cooling by means of cooling water.
Unterkolbenpresse. Completely with oelhydr. Pump plant as well as
electrical control. Kammerplattenformat:1050*750mm;
Beschickungsseite:1050mm; 4-Etagen ever with light Weite:80mm; Spec
pressing power max:61kp/cm2; Total pressing power max:480Tonnen; Pump
engines 11+7,5kw:2stck; Dampferzeuger:1stck; AD-ID: A404307 More Infos click here
Beam Cutting Press, Pedersen, , electro-hydraulic 4 Pillar press
Cuttingarea ca.700 x 1800 mm Cutting force 80 Ton.
Will be sold as is !, AD-ID: A405165 More Infos click here
Luigart press , Luigart & Sohn GmbH u.Co KG, 4SPY 100 S0, , pressing force: 1000 KN operating
pressure: max. 250 bar Werkzeugaufspannfl.max.2500 * 1600 ram stroke:
max. 500 mm opening height: max. 900 mm total weight: 25,000 kg
without oil filling and tool tool upper section thread: max. 2250 kg
of Sitema type: KR 80 safety margin: 320 mm of drive power entirely:
35.5 KW of tension 415 V/50 cycles per second of remarks: Additional
device, 2 hand device; Plant until December 2004 in enterprise.
Dismantling and storage, January 2005 AD-ID: A398772 More Infos click here
Wemhoener press , Wemhoener Spezialpressen GmbH, Model 101 K-50L, , type: Model 101 K-50L pressing force:
500 KN operating pressure: max. 220 bar table stretch flat steel bar
down: 2600 * 1700 table stretching flat steel bars above: 2450 * 1600
ram stroke: max. 500 mm opening far (distance between the
Platten):" max. 2000 mm total weight approx.: 25.000 kgohne oil
filling and tools Antriebsl.der press: approx.. 33 KW of tension 380
V/50 cycles per second of plant until December 2007 in enterprise.
Dismantling and storage, January 2008 AD-ID: A398714 More Infos click here
Rubber injection moulding machine , MAPLAN, GSP 630.15VOF-M4, , Vertical rubber injection moulding machine Manufacturer: Maplan technical main data pro press: - Year of construction: 1997 - Operating pressure: 250 bar - closing and transfer strength: 6300 Kn - heating disk size (special equipment) with helical rollers: 900 x 1200 mm - maximum distance between the heating plates (more fuer extended columns): 1350 mm - Opening and closing way: 1050 mm - max. distance between the columns: 1000/690 mm - central distance of the stroke borders: 950 mm - Tool height min. max.: 300/950 mm - specific Spritzdruck max. approx.: 2500 bar - spraying volumes: 1500 cm - Plastifizierleistung, dependent on the mixture approx.: 200 cm/seconds Scope of supply of the basic execution pro press: - 1 hydraulic closing unit with ultrasonic position indicator and electrohydraulical closing stroke protection. - 1 Plastifiziereinheit. - 1 hydraulic spraying unit with ultrasonic position indicator and mechanical Duesenanpressung. - 2 heating plates, electrically, 380 V, 1-zonig heats (3 zones for each plate S. 4,408). - The heaters become 3-phasig with wear-free self-monitoring thyristor contactors switched. - 1 oelhydraulisches power supply unit. - 1 hydraulic control equipment (Proportionalsteuerung for pressure and speed). - thermalstatic regular water valve for the automatic constant of the engine oil temperature. - 1 pneumatic-operated protective door at the control side of the press with end position cushioning and printing safety rails (3-seitige safety divice see pos. 3,7). Press-forehead and rueckseite is disguised with firm grilles. -1 mat foundation with tub for press and power supply unit. -2 operating manuals. (Further towels are available against additional price. See for this pos. 6,820). -1 electrically electronic control, with microcomputer system MCS 4, consisting of: - free standing control cabinet for the SPS SIEMENS S5/115 U - Machine cabinet (cultivated to the power supply unit) for all Switchgears and safety devices for pump drive, auxiliary drives, heating circles and keeping at a moderate temperature devices. Operating voltage 380 V, 50 cycles per second, Control voltage 220 V. - Control computers with intergriertem control tablet tiltable, IBM RK compatibly, CCU of 80486, 4 MT RAM memories, 160 MT non removable disk, Interface for floppy disk drive (floppy disk 3.5) 10.4 STN color Display, integrated transparency keyboard, dust proof and splash-water AD-ID: A421296 More Infos click here
Rubber injection moulding machine , Desma, 968.630-ZO, , Rubber injection moulding machine DESMA 968.700-ZO 1 closing unit - Closing force: 7.000 kN - heating plates: 900 x 1,200 mm 1 pointed unit (FIFO) - Snail: 45 mm - Injection volume: 1,600 cm - Injection pressure: 2.150 bar 1 serving and control unit DMC 2 S5. Weight of the machine: - Closing unit: 19500 kg - Pointed unit: 1600 kg - Hydraulic unit with hydraulic oil and electrical switchgear cabinet: 2200 kg - Additional device: 1000 kg Electrical Data: - Installed engine performance: 34.8 KW - Power input: 307.5 A mains connection: 3 X 400V N PE 50Hz Hydraulics Pneumatics Cooling, need and connections: - Tank stop: 300 L - Compressed air: 6 bar - cooling water: 0.9 m/h Accessory mechanisms: - Oeltemperiergeraet TEA 62 for keeping at a moderate temperature the spraying unit - nozzle-raised over hydraulic cylinder - spraying increase in pressure 2,150 bar with 1.600 cm - hydraulic nuclear lifting device to bewegl. Clamping plate with 500 mm stroke, slot distance 950 mm, slot size: 18 mm, complete with way measuring instrument - hydraulic nuclear lifting device at the nozzle-lateral clamping plate with 350 mm STROKE, slot distance 950 mm, slot size: 18 mm, complete nozzle kept at a moderate temperature - vacuum mechanism with 25 m /h suction power -, open with way measuring instrument - mass temperature indication -, Streifenfuehrung inclusive strand monitoring - sentence extended heating plates to 900 x 1,200 mm with 22 mm of T-slots - heating time optimization - nuclear heating two-way 28 KW - Pressure water keeping at a moderate temperature equipment TEA 70 inclusive complete installation for September. Keeping at a moderate temperature of cold channel block and nozzles, inclusive emergency cooling function - Handlingschnittstelle - SPC program -3-Zonen regulation for 4 heating plates (2x machine-lateral heating plate, 1x cold channel heating plate, 1xReserve - heating staff monitoring for 4 heating plates with 3-Zonen regulation - additional temperature map - handling to the withdrawal of 4 articles inclusive Dead head, installs at back of the machine inclusive grille - light curtain more fuer 2 sides instead of mechanical grille - additional temperature sensors fuer tools - tie rod extension by 150mm - for tool change system consisting of 2 pieces of role borders in the heating plate down as well as 1 pair role consoles with support for fastening to the machine AD-ID: A421299 More Infos click here
Angel presses , ENGEL, ES 80H/50V SO-TR , , injection moulding machine vertically make ANGEL
type IT 80H/50V THEN-TR year of construction 1990 control type CNC
stock location Eschwege country of origin Austria technical details
Schneckendurchmesser 22 mm of Spritzgewicht in polystyrene 35 g/PS
closing force 500 kN ***** spraying unit ***** Schneckendurchmesser 22
mm of piston displacements 38 qcm Spritzgewicht in polystyrene 35 g/PS
spec. Spritzdruck increases 2,050 bar of ***** Schliessinheit *****
Schliessraft 500 kN Oeffnungsweg 300 mm of Plattenabstand max. mm of
Werkzeugeinbauhoehe of min.450 mm of Werkzeugaufspannplatten h x v 520 x 320 mm of Auswerferkraft
kN Auswerferweg mmTrockenlaufzeit after euro map 3.5 s diameter of the
top plate 880 mm of ***** control ***** microcomputer EC 88 A02
Monochrombildschirm interactive videotext German Diskettengeraet
externally optionally ***** electrical connection ***** standard
voltage 3x400V, with N 50 cycles per second ***** general *****
-Maschinenstunden 60168 h machine Oelbehaeltervolumen 155 l lacquer
finish ral 6011Pumpenantriebsleistung 15 KW of amount of heat 3.2 KW
machine weight approx.. 4,800 kg space requirement approx.. 3.1 x 2.3
x 3.2 m additional information Spritzeinheit horizontal for the
processing of thermoplastics Schliessinheit fully hydraulic with
external rapid traverse cylinders closing from above. AD-ID: A423539 More Infos click here
