Roller race galvanized, Foerderbreite 1140 mm, Gesamtlaenge ca. 500 m, , Rollenbreite 1140 mm total width 1220 mm of role diameters 60 mm a large part of the roller races is equipped with Bremsrollen and pallet stoppers AD-ID: A268775 More Infos click here
, Bredel , SP 65 und 80 , , Almost like new schlauchpumpen with schlauchdiameter 65 and 80mm 7.5 kw motorleistung 4.4 bis27upm AD-ID: A106599 More Infos click here
Water pump centrifugal pump high-grade steel , SIHI, Nowa Q=15m³/h, H 57 m, ,
Pumpengehaeuse/Fluegelrad high-grade steel delivery 15 m /h column H
57 m engine performance 7.5 KW of number of revolutions 2900 1/min
uses little, from spare camp AD-ID: A363644 More Infos click here
Hydraulic cylinder 25 pallets NEW versch. Sizes , , , , hydraulic cylinders 25 pallets, new and unused, various dimensions. AD-ID: A423846 More Infos click here
Turning unit roller race, 700 x 1500 mm, angetrieben, , driven car with role-driven rotary wreath roll width 720 mm Rollenbahnlängeb 1500 mm roll diameter 85 mm AD-ID: A225198 More Infos click here
Adjustable mechanism engine, adjustable gear motor , Marelli, 5,5 KW, Drehzahlbereich 40 bis 220 1/min, , 5.5 KW power engine speed range from 40 to 220 1/min (speed adjustment electric) engine power 5.5 KW drive shaft 50 mm B3 execution IP55 (2 units available) AD-ID: A343897 More Infos click here
Crane, Waagner Österreich, Voll Portalkran, , voll-Portalkran manufacturer: Waagner
Austria year of construction: 1988 track width: 40m Kragarm right:
further 4m Kragarm left: further 12,5m vertical lift: 12m carrying
capacity: in the year 2004 of the manufacturer to 18 tons increases
speed of lift: 50m/min steplessly Katzfahrgeschindigkeit: 8 - 80m/min
steplessly kranfahrgeschwindigkeit: 3 - 32m/min steplessly envelope
achievement: 80to/Std. AD-ID: A425296 More Infos click here
Roller race curve 90 roller race curve conveyor , , , , 90
curve, propelled roles, rollenbreite 40cm and 30 cm, Vario drive.
Several curves available, straight times 6 months been in the use.
Very good condition!! Further roller races and belt conveyors in
stock. AD-ID: A424357 More Infos click here
Gear motor electrical gear motor 1.5 KW of 13 U/min B3/B5 , SEW, R87F DT90L4, , achievement 1.5 KW of number of revolutions 13
U/min wave 50 mm of design B3/B5 AD-ID: A416333 More Infos click here
Volume plant , , , , overall length 45.00 m (3 sections A 15, o m), belt
width 600 mm, cantilever, on one side accessibly, everything
completely, no belt AD-ID: A358622 More Infos click here
Ball screw rolling screw pillar of kugelgewindetriebe , SKF, SN 32 x 5R, , overall
length 607 mm length of thread 467 mm driving shaft d=25 mm x 125 mm
with Passfedernut-(25 Sueck available) AD-ID: A409794 More Infos click here
Roller race with transverse shifting cars , , , , about 400 meters of roller race Height about 45 cm Width about 60 cm Role distance center/center 20 cm Role diameter about 5.5 cm The roller race has a firmly welded foot. If necessary can be bought transverse shift cars with. Partial sale possible The roller races are sold as seen without any warranty Intermediate sale and mistake reserve Partner: Mrs. Rogel AD-ID: A429310 More Infos click here
Hydraulic unit / aggregate , Stracke+Kottmann, HPE, , hydraulic unit Manufacturer: Stracke Kottmann GmbH + Type: HPE Built: 1982 Q: 40 / 30 l / min Pmax.: 250 atü Engine: Bauknecht 22 kW total mass: 1 m long x 0.60 m wide x 1 , 50 m high AD-ID: A444907 More Infos click here
Hydraulic cylinders , , , , lifting, Wegdrücken, pull or Vera core of heavy loads, we offer a comprehensive range of hydraulic cylinders. Models include: - Flat cylinder - telescopic cylinders - cylinder with backup mother - Hollow - cylinder with spring retreat - Stufenhebezylinder AD-ID: A373486 More Infos click here
High pressure centrifugal pump vertical one, grundfos, cr 30 - 130 a-a-auue, , water conversion 30kubikmeter/stunde 2900 revolutions per minute of hoisting depth 139,3m 25 bar max 110grad C max. attention 2 pump available - to deliver also separately, it found when dissolution company of my deceased of uncle - never in the use been AD-ID: A323815 More Infos click here
Elevating truck platform, Jungheinrich, EJE KWS-3, , electrical elevating truck
platform pulpit to stand for Gabellaenge 1,15m vertical lift of 0,2m
along AD-ID: A189552 More Infos click here
Electric motor 160 KW, 1490 U/min B3 , SEVA, SEV-315/A4, , - Achievement 160 KVA - number of revolutions 1490 rpm - tension 400 V -50 cycles per second - IP54 - strengthened storage (drive belt) - weight 1050 kg - engine still been in the use, spare engine AD-ID: A421247 More Infos click here
Filter pump swimming pool water circulation pump, Speck, Badu 40/25 G, , sucking in plastic pump to the swimming pool water circulation in filtering units. Execution as block pump with integrated Fasernfaenger (approx. 3 l contents) with housing from glass-fiber reinforced polypropylene and bellows axial face seal on plastic impeller hub to the physical separation of engine and medium. Operating voltage 400 V DS, rated current 5.2 A, capacity 1.65 KW. Pumpenleistung 1.3 KW or 26 m3/h against 8 m total hoisting depth. Connections suction/print page R 2 AD-ID: A287487 More Infos click here
Telescopic cylinder , -, 670 bis 1700 mm, , Laenge brought in 670 mm of Laenge driven out 1700 mm of baseplate 120 x 120 mm in diameter piston rods 120/110/100 mm AD-ID: A335378 More Infos click here
Conveyor conveyor plant diagonal conveyor 90 K , , , , large
post at promotion course elements. The plant was straight times 6
months in the enterprise and is in a very good condition. Belt
conveyor: approx. 100m Foederband (39cm) with lateral. Grinding band
(22cm) approx. 160m conveyor (35cm) approx. 70m conveyor (30cm)
approx. 100m conveyor (40cm) many conveyors with piece of diagonal for
beginning Schraefoerderung. Many propelled 90 curves (roller
race-short) AD-ID: A424349 More Infos click here
Elevating platform, Pfaff, , , elevating platform of the company Paff. Table size: 750 x 1250mm vertical lift: 800mm. Stroke load: 1000kg Pruef.Nr.71/9735 400V AD-ID: A197909 More Infos click here
Centrifugal pump, KSB, CPK - C1, , 110 m3, 70 m, chrome-plated steel, axial face seal, only pump on baseplate, engine could be procured, AD-ID: A175418 More Infos click here
Electric motor 75 KW, 2970 rpm, B3-B5, AEG Ecoair, AM280SC2, , engine data:
Achievement: 75 KW of number of revolutions: 2970 1/min tension:
380-660 V (triangle star) safety class system: IP54 design: B3-B5
wave: 65 mm further data see photo vehicle identification plate
(1561) AD-ID: A322353 More Infos click here
Electric motor 110 KW, 2965 rpm, B3-B5, Leroy-Somer, LS315ST-2, , engine data:
Achievement: 110 KW of number of revolutions: 2965 1/min tension: 380
V (Dreieck)Schutzklasse: IP54 design: B3-B5 wave: 65 mm further data
see photo Typenschild(1568) AD-ID: A322354 More Infos click here
Stacker engine electric motor direct current motor , Steinbock, R178/3,5K 604/592, , tension 48 V of achievement 3.5 KW of number of
revolutions 1950 U/min AD-ID: A408418 More Infos click here
Turning volume, , , , 3,4m lengthens, for turning wood; was in the furniture industry as connection between 2 grinding machines, AD-ID: A270429 More Infos click here
Building elevator, Steinweg, , , Manufacturer: Steinweg Boecker Location: 75428 Illingen, Germany Type: Boy Load-carrying capacity: 125 kg Current supply: 220 - 240V, 5,3A Achievement: 1 HP/0.8 KW Engine: Kobold KOE 62; 2800 rpm Size of the lattice box: L 66cm, B 35cm, H 45cm Size of pouring excavator bucket: H 58cm, D above 53cm, D down 28cm steel cable: 20 meters Weight: approx. 150kg Location: 75428 Illingen (Enzkreis) AD-ID: A305920 More Infos click here
Pressure-reducing valve, Braukmann Honeywell, D 15 - 65 A, , operating
range water, oil-free compressed air and nitrogen to 70 C.D 15: Form
max. 16 bar, Hinterdruck 1.5 6 cash bar DN65Gewicht 37 kg AD-ID: A317557 More Infos click here
Hydraulic unit , Rexroth, , , Rexroth hydraulics aggregate 30.05.01 AB 07734 A, No 630 L tank with nitrogen bubble 2 x 250 bar Brünninghaus pump A 10 VSO 71 DFR 30 R PPA-12 N 00 02/90 speed 2200 min 210 bar engine type VEM KPER 225 S4 V 70.5 / 40.5 Built in 1992 in very good condition AD-ID: A447741 More Infos click here
Centrifugal pump water pump, Lowara, HTS 32-160/30, , flow 12-27 m / h H = 29.8 - 22.2 m Hmax = 31 m 3 kW engine power AD-ID: A287506 More Infos click here
Electrical gear motor, VEM, 30 KW - 27 U/min, , engine
performance 30 KW of number of revolutions 27 1/min waving final
assembly 120 mm wavelength 210 mm AD-ID: A219983 More Infos click here
Hydraulic motor , GSL German Standard Lift, 780-0400-660-002, , Hydraulic motor more fuer the drive of work platforms of the company GSL (German standard elevator) universally applicable AD-ID: A336975 More Infos click here
Fork elevating truck platform , Schwedmach, Rapid Junior, , Aeusserst robust Hydraulics: Senk, and reciprocating pumps are hardened, ground, and in addition chromeplated feinpoliert! Each component of hydraulics can be changed! * Tested load capacity: 2500 kg * fork length 1150 mm (standard for Europe Latvians), 810 mm without extra cost! Protection against Ueberlastung through a valve. * Additional Einfahrrolle. * * Kunststoffummantelter handle Ca. 70 kg net weight * ride height 85 mm Max Hu [...Technical data truncated] AD-ID: A378967 More Infos click here
Foerderschecke 420 x 3500 mm , Nema, -, , - Diameter snail 420 mm - upward gradient snail 150 mm - trough length 3500 mm - trough height 630 mm - engine performance 3 KW /50 1/min - total dimensions L/B/H 5300/600/720 mm AD-ID: A375776 More Infos click here
Pump , APV, 4RI/ H-0708, , Kreiskolbenverdrängerpumpe motor for SEW, type R60DT100LS4TF, 1400/201U/min, 2.2 kW, S1, 380V AD-ID: A341337 More Infos click here
Gear motor electrical gear motor flange B5 , Bauer, 2,9 U/min, 0,55 KW, , -speed 2.9 rpm performance 0.55 KW housing B5 flange diameter 65 mm-wave protection IP 54-weight 180 kg (3 pieces available total price, 1800 Euro net ) AD-ID: A396912 More Infos click here
pc. used roll conveyor segments, steel blank, BITO, Typ RB08-144, It is about 14 pc. used roll conveyor segments, producer BITO, type RB08-144, with usual second hand marks.
Data: Producer BITO
Type RB08-144
Length approx. 2500 mm
Overall width approx. 1095 mm
Height approx. 90 mm
Pallet weight approx. 800 kg
Pallet width approx. 1000 mm
Roll conveyor protection in front with stop unit available
Roll conveyor protection in back without stop unit available
Ramp bevels Q-ty of rolls made out of steel precision tube 15
Rolls diameter ca. 60 mm
Rolls pitch ca. 144 mm Advantages: Rolls with high carring capacity
constant load distribution
minimal friction
Overall width well adapted on pallet storage rack standards Torsion resistant for roll conveyor profile Maintenance-free ball bearings
Long-living
simple installation, horizontal on ground floor or with slight down-grade
by slight down-grade rolls the pallet to point of receipt autonomously
Technical data as specification by producer, errors excepted. The offer is non-binding, subject to prior sale, inspections possible after agreement. More information on inquiry. Price plus sales tax on top free ex location. Location: Stuhr/Germany Price:on request
, AD-ID: A402388 More Infos click here
Electric motor 15 KW, 1445 1/min , Halter, DE160L4, , - Achievement 15 KW - number of revolutions 1445 1/min - wave 42 mm - design B3/5 - IP54 AD-ID: A433452 More Infos click here
Electric motor 30 KW, 1420 1/min , AEG, AM 200 LV4, , - Achievement 30 KW - number of revolutions 1420 1/min - wave 55 mm - design B3 - IP55 AD-ID: A433346 More Infos click here
Boiler feed pump , Pumpenwerk Halle, H G 1 D 125 / 12 160 A, , 3 pieces nominal delivered flow: 206 m/h nominal
hoisting depth: 1296 m temperature: 150 C rated speed: 2950 U/min p.
Mot. erf.: 1190 KW of mass: 2425 kg AD-ID: A342925 More Infos click here
Gear motor electrical gear motor with brake , Brook Hansen Stephan Werke, WU-DA132SJ-H-4BG / SPTS44B, ,
achievement 4.4 KW 400/690 V of number of revolutions 28.2 U/min
hollow shaft 70 mm of brake 400V AC/178 V DC -IP55 AD-ID: A410734 More Infos click here
Roller track with electric drive , , , , about 60 meters roller track electric. Width 875 mm. Lengths 1000 and 2000 mm. 2 x drive unit. Width 980 mm. Length 1490 mm. Role 9 cm diameter roll center center distance 12.5 cm. Between sales and Irtum reserved. The article is sold as is without warranty. AD-ID: A451456 More Infos click here
Electric motor 160 KW, 2960 rpm, B3-B5, Schorsch, KN5315S-AB037-Z, 500 V, , engine data:
Achievement: 160 KW of number of revolutions: 2960 1/min tension: 500
V (Dreieck)Schutzklasse: IP23 design: B5-B5 wave: 70 mm further data
see Typenschild(1570) AD-ID: A322332 More Infos click here
Propelled roller race , Ligmatech, TR10, , Ligamtech roller race Inclusive consists of 4 roller races Angle delivery and a putting up station. The length 2 x 3000 mm, 2 x4000mm the width approx. 1200mm. Role diameter: 64mm role division 120 mm feed motion steplessly 7 - 40 m/min work-hear 870 -1150 mm all data according to manufacturer. Without guarantee. Inspection after arrangement possible. AD-ID: A438845 More Infos click here
Water pump column pump 27 m /h, 30 KW , Lowara, SV809F40T, , - Mechanical handling capacity Q=6 - 14 m /h - engine performance 4 KW - Hmin 60 m - number of revolutions 2900 1/min - tmax 120 degree year of construction 2007 AD-ID: A436456 More Infos click here
Vibratory conveyor 250 x 150 x 2700 mm, Diemer-Automat GmbH, DS 250, , Engine 1.5 KW of gutter width 250 mm of gutter length 2700 mm of gutter depth 150 mm of conveying speed 0.2 m/sec steel feathers/springs in the distance of 1000 mm promotes Schwarten, Saeumlinge, round timbers, hogged wood, splinters etc. AD-ID: A212689 More Infos click here
Hydraulic aggregate , Herion, A 571, , Litre achievement of 15.6 litres/min max. pressure 30 bar level of fuel in the tank of 40 litres with electrical control valve AD-ID: A327751 More Infos click here
To direct current motor gear motor , Siemens Alpha, 1FT50641AC714AHO PKF 600-MF4-1800-460, , technical data see photos AD-ID: A340769 More Infos click here
Gear motor worm gear 1.67 1/min , SEW, SF92R63GN90LBM, , - Number of revolutions 1.67 1/min - engine performance 0.9 KW - wave diameter 70 mm - design V11A - safety class system IP44 - with brake AD-ID: A376101 More Infos click here
Hydraulic cylinder strut cylinder (4 pieces) , -, 140/100/285, , Piston diameter 140 mm of piston rod 100 mm stroke 285 mm of feed tables 300 mm AD-ID: A334187 More Infos click here
Direct current motor, General Electric, 5 BC 48 AB 319, , obsolete engine flange held by the German Army and NATO, weighing about 17 kg; wave about 11 mm, thread about 11 x 1.5 mm (presumably customs mass); aluminium; price per engine, 20 pieces available AD-ID: A301704 More Infos click here
Hydraulic pump with drive, Eckerle, 300 bar, 40 cm³/U, , Foerderleistung max. 40 cm /U printing achievement max. 300 bar of engine performance 22 KW with star-delta connection AD-ID: A286886 More Infos click here
To electric motor electric motors, große Auswahl, , , Elektomotoren large selection
see document list in the plant AD-ID: A322455 More Infos click here
, , , length: 3.090 mm, each section
working width: 800 mm
working height: 375 mm +/- 20 mm
roller width: 650 mm
roller diam.: 89 mm
roller distance: 150 mm
load capacity: 1.400 N/roller
max. load capacity: 50.000 N, each section
feed motor: 0,37 kW, each section
conveyer belt SCHUMA (art#30), SCHUMA, L-Band, conveyer belt / L-belt SCHUMA 950 x 2.400 x 400mm, 380 V, price: 1.300 €, contact: Mr. Rainer Eckerle, AD-ID: A376115 More Infos click here
Vacuum jack, Schmalz, Jumbohandy 30 BB30-H-Pgriff, , Load 30.0 kg; with vaccum pumps (Pfeiffer) type sports association 1040 B00 INZZ, final printing 120 mbar; 5 devices with different Hebegeschirren; Price is valid per piece; Rail system available, however in the price do not contain AD-ID: A277018 More Infos click here
High-pressure pump hydraulics, Voith, IPH 4-20, , max. pressure 300 bar delivered
flow at 1500 1/min = 31 L/min. numbers of revolutions from 300 to 3000
1/min AD-ID: A317210 More Infos click here
Hydraulic cylinder strut cylinder (2 pieces) , -, 160/100/300, , Piston diameter 160 mm of piston rod 100 mm stroke approx. 300 mm AD-ID: A334195 More Infos click here
Electric motor 110 KW, 2980 rpm, B3-B5, Schorsch, KA3315S-AB034-Z, , engine data:
Achievement: 110 KW of number of revolutions: 2970 1/min tension:
380-660 V (triangle star) safety class system: IP23 design: B3-B5
wave: 65 mm further data see vehicle identification plate (1569) AD-ID: A322337 More Infos click here
Disk conveyor disk promoter , AST Anlagen u. Spezialtechnik GmbH Leipzig, TB, , length: 4,20m range: 0,40m
weight: 480Kg good condition, operationally with 2x emergency stop AD-ID: A426109 More Infos click here
Hydraulic cylinder , -, 150/80/400 8 Stueck, , piston diameters
approx.. 150 mm of piston rod diameter 80 mm stroke approx.. 420 mm of
overall length driven out 1800 mm of connections via the piston rod
ideal for machines where the piston rod to be protected must -8 ea.
available AD-ID: A411521 More Infos click here
Strut cylinder , 4 Stueck, 140/120/600, , - Piston diameter approx. 140 mm - piston rod 100 mm - stroke approx. 600 mm - overall length approx. 1050 mm - support plate d=300 mm AD-ID: A434258 More Infos click here
To direct current motor 48 V, Modena, 51-SB-NV-Q-DS, , 48 volts 2 KW 2000 1/min 7.55 Nm more information see photos (2 units available) AD-ID: A266137 More Infos click here
Gear motor , Bauer, 5,5 KW, 11 U/min, , engine performance 5.5 KW
of number of revolutions 11 1/min drive shaft 80 mm x340 mm of
dimensions L/B/H 1600/500/500 mm(2 piece available) AD-ID: A328113 More Infos click here
Roller races cars, , , , 13 x 2.50 m long and 500 mm Rollenbreite 1 x 2, 30 m long and 900 mm Rollenbreite 1 x 2.30 m long and 1100 mm Rollenbreite and further remarks ever 4 of metal wheels per Rollenbahen car for e.g. rails AD-ID: A303078 More Infos click here
Electric forklifts , OM FIat, E 40 N, , 6.6 m hub, 3 and 4 Steürkreis Hydr thrust forks, 1,200 mm / 1,700 mm, side slider, techn. Condition good ride, lighting, weather protection, charger AD-ID: A448586 More Infos click here
Gear motor electrical gear motor 2.2 KW of 24 U/min B3/B5 , SEW, -, , achievement 2.2 KW of number of revolutions 24
U/min wave 50 mm of design B3/B5 AD-ID: A416339 More Infos click here
heavy transport rollers with clevis mountings (9 pieces) , -, 150 x 1185 mm, , - Rollenbreite 1185 mm - role diameter 150 mm (thickness approx. 6mm) - reciprocally stored with clevis mountings (wave 45 mm) - one-sidedly with parallel key groove for drive AD-ID: A337431 More Infos click here
Conveyor , Venjakob, 2000 x 9400 mm, , Conveyor width 2000 mm of conveyor length 9400 mm total width 2180 mm height 900 mm adjustably /-200 mm AD-ID: A339440 More Infos click here
Frequency static frequency changer, Perske, 15 KVA / 200 hz, , entrance: 380V/11
A/50 cycles per second/11 KW exit: 133 V/65 A/200 cycles per second/15
KVA AD-ID: A322795 More Infos click here
Auger, , , , auger for fodder grains, saegespaene or other
strewing goods in very good condition to deliver whole little run
length approx. 12,50m snail draws the material to be conveyed in such
a way can clog less (ex-factory price 3500, -) AD-ID: A322827 More Infos click here
FLUDEX-Kupplung, Flender, FLUDEX-Kupplung, 5. Technische Beschreibung
5.1 Allgemeine Beschreibung Baureihe FA
7 Ausgleichskammer
8 Arbeitsraum
9 N-EUPEX-Anbaukupplung
12 Paket (N-EUPEX)
101 Schaufelschale (Außenrad)
102 Deckel
103 Schmelzsicherungsschraube
105 Schaufelrad (Innenrad)
106 Hohlwelle
120 Keilriemenscheibe
153 Einfüllschraube
163 Verschlußschraube
7
163
8
106
105
103
102
120
153
FAD
FAR
101
9
12
Die FLUDEX-Kupplung ist eine hydrodynamische Strömungskupplung, die nach dem Föttinger-Prinzip
arbeitet. Die Kupplungsteile von An- und Abtriebsseite sind mechanisch nicht miteinander verbunden.
Die Drehmomentenübertragung erfolgt über die in der Kupplung strömende Flüssigkeitsfüllung, die
über radial angeordnete Schaufeln geführt wird. Dabei stellt sich im Dauerbetrieb ein geringer
Drehzahl-Schlupf ein.
FLUDEX-Kupplungen der Baureihe FA.. sind für beide Drehrichtungen geeignet. Sie können in
horizontaler, geneigter oder vertikaler Lage eingebaut werden. Vorzugsweise sollte der Antrieb über
die Hohlwelle (106) und das Schaufelrad (105) erfolgen, damit die Vorzüge der Ausgleichskammer (7)
und der Arbeitsraumgeometrie genutzt werden können.
Bei Blockierung oder Überlastung durch die Arbeitsmaschine erwärmt sich die Kupplung, bis die
Ansprechtemperatur der Schmelzsicherung erreicht ist.
Durch das Ansprechen der Schmelzsicherung entweicht die Betriebsflüssigkeit und der Antriebsmotor
wird von der Arbeitsmaschine getrennt. Um das Abspritzen der Betriebsflüssigkeit zu verhindern,
können elektronisch oder mechanisch gesteuerte thermische Überwachungseinrichtungen (siehe
separate Betriebsanleitungen) eingesetzt werden.
Betriebstunden: 5000, AD-ID: A371832 More Infos click here
High-pressure pump , Falch, live 100, , - Operating pressure 100 bar - operating voltage 230 V - Foerdermenge 600 l/h - inlet temperature 70 degrees AD-ID: A376054 More Infos click here
Frequency changer 30 KVA, 100 cycles per second , Perske, DA 14/2, , entrance 380 V of 27A/50 cycles per second exit 30 KVA/
46A/ 100 cycles per second AD-ID: A411923 More Infos click here
Dosing pump, ProMinent, VAMA04120PP1000A112, , dose of liquid media Dosierleistung 120/144 l / h electric pressure 3.5 bar. Following 220 V / 0.1 KW AD-ID: A262219 More Infos click here
Shears elevating platform 5000 kg , Trepel, Tisch 6800 x 1400 mm, ,
carrying capacity 5000 kg table 6800 x 1400 mm height driven out 1850
mm height brought in 380 mm stroke 1470 mm along hydraulic aggregate AD-ID: A339414 More Infos click here
Electric motor 75 KW, 2970 rpm, B3-B5, Schorsch, KA7280S-ABO34-Z, , engine data:
Achievement: 75 KW of number of revolutions: 2970 1/min tension:
380-660 V (triangle star) safety class system: IP54 design: B3-B5
wave: 65 mm further data see photo vehicle identification plate
(1566) AD-ID: A322346 More Infos click here
Hydraulic cylinder , , 500 mm Hub, , Overall length driven out 1300 mm of piston rod 80 mm piston rod connection d=45 mm of admission cylinder pin (2x) d=45 mm AD-ID: A335383 More Infos click here
Crane installation/chain courses , auf Anfrage, , , Ladies and Gentlemen, we offer
building block principles of small crane installations of the
companies DEMAG to you and/or. ABUS uses partially newly, to favorable
conditions on. The plants are custom-made co-ordinated with your need.
With inquiries you say to us please whether you want to make a
linienfoermigen and/or surface covering transport. Furthermore we need
your data of the carrying capacity, krantraeger and tables, hanging up
distances, roof pitches and kind of the floor structure. Please you
call your lifting problems us. The moreover one we can offer the
electric chain hoists to you for favorable conditions. AD-ID: A416961 More Infos click here
Oil feed pump, Rickmeier, R25-12,5 FL-Z-DB, , engine performance 1.5 KW for oils
with a kinematic Viskoesitaet 33 mm /min delivery approx.. 18 L/min. AD-ID: A317205 More Infos click here
Flow switch, Erhard, DN80, , for lubrication systems, transmissions and
cooling circuits in rolling mills, turbinenanlagen, power stations,
chemistry enterprises etc. for the monitoring of Volumenstroemen.Der
flow rate is indicated visually. The inserted limit value contacts can
be stopped to the desired flow rate, in order for example a pump or to
machine-in or switch off. AD-ID: A317569 More Infos click here
Centrifugal pump water pump 200 m /h, KSB, ETA 15-40 K, , Mechanical handling capacity Q=200 m /h H= 45 m engine performance 45 KW of number of revolutions 1455 1/min AD-ID: A287525 More Infos click here
Telescopic cylinder, Hub 2170 mm, , , Laenge brought in 750 mm of Laenge driven out 2920 mm stroke 2170 mm of outside diameters 180 mm (4 pieces available) AD-ID: A287528 More Infos click here
Hydraulic pump 24V, Schabmueller, D112/2R 500/500-3,8/05, , port 24 V
achievement 2 KW of number of revolutions 2450 1/min AD-ID: A322120 More Infos click here
Water pump column pump 27 m /h, 30 KW , Grundfos, BM27-32N, 150 x 5000 mm, ,
out high-grade steel mechanical handling capacity Q = 27 m /h engine
performance 30 KW h = 225 m p = 0.5 to 80 bar Model C13551932-9726
tension 3x 380-415 V -50 cycles per second of -IP of 54 diameters 150
mm of overall length 5000 mm weight 220 kg AD-ID: A410280 More Infos click here
Water pump column pump 27 m /h, 30 KW , Grundfos, 27-32N, 150 x 5000 mm, ,
out high-grade steel mechanical handling capacity Q=27 m /h engine
performance 30 KW of -H=245 m -P=0,5 up to 80 bar of Model
C13551932-9726 tension 3x 380-415 V of -50 cycle per second IP
54-Durchmesser 150 mm of overall length 5000 mm weight 220 kg AD-ID: A410283 More Infos click here
Conveyor belt conveyor , , , , belt conveyor: Different lengths
and widths. They can arrange your length individually. approx. 100m
Foederband (39cm) with lateral. Approx. 160m conveyor (35cm) approx.
70m conveyor (30cm) approx. 100m conveyor (40cm) we still many
propelled grinding band (22cm) curves and conveyors with elbow
(conveyor) u.v.m AD-ID: A424387 More Infos click here
Frequency static frequency changer, Himmel, 6 KVA / 200 Hz, , entrance: 380V/50
cycles per second/5.5 KW exit: 133V/200 cycles per second of 6 KVA AD-ID: A322798 More Infos click here
, KSB, 150-400 (2 x 11 kW 2 x 15 kW 2 x 30 kW), , Example at the 30 KW centrifugal pump: 1465 revolutions KRPFA 150-400 Q 27.8 l/s H28 all pumps are identically constructed (except the engines) and between year of construction the 1992-1995 following dimensionings at pumps are to be sold: for 2 x 11 KW of 2 x 15 KW of 2 x 30 KW the auction price is valid for a centrifugal pump all pumps have the same price! Due to the weight and the functional test which can be made the pumps do not koennen dispatch become. Only at Selbstabholer. The pumps were removed fully functionally, are thus offered here as used. A functional test locally can be accomplished of the Kaeufer. The necessary installation must be made. AD-ID: A357555 More Infos click here
Cup point machine ichtungsschneidemaschine , Klinger, -, , -max. Ring diameter 1250 mm-min. Ring diameter 80 mm-cut max. 9 mm-with conv. Measuring body weight 6.5 kg AD-ID: A393920 More Infos click here
MKMG.85 circulation pump heating pump Wilo P/DOP 80125, Wilo, P / DOP 80/125 r, , you
offer company WILO from an industrial firm dissolution on a used
circulation pump. Type: P/DOPE 80/125 r, with double flange, double
pump, max. To number of revolutions 1350 U/min, connection nominal
size 80, impeller diameter 125mm, flange diameter see sketch. Weight
approx.. 32 kg dispatch on one-way pallet by forwarding business
possible, costs Germany far 45, - - euro - gladly also at
Selbstabholer, location 45527 Hattingen/Ruhr. AD-ID: A297409 More Infos click here
Lifting magnet 42 V , Kuhse, GH120.17, , tension 42 V
direct current stroke 30 mm of magnetic field strength 110 N
Ankergewicht 2.2 kg of diameters 120 mm of length approx.. 275 mm AD-ID: A409107 More Infos click here
Water pump 24 m /h , Lowara, 2CNF32-250/55, , mechanical handling
capacity 6 to 24 m /h h max 78 m engine performance 5.5 KW/2850 U/min
(2 pieces available) AD-ID: A402681 More Infos click here
Water filter high-grade steel , -, Kesselvulumen ca. 30 Liter, , -stainless steel tank about 30 litres of content connectors 2 inches sampling tubes connecting 3 / 8 inch AD-ID: A397936 More Infos click here
Checkweigher, Garvens, verschiedene Typen Baujahr 1995 bis2003, , balancing range to 2500 g, product supply of
on the left of or right, encasing material made of high-grade steel,
everything with 230V connection (protective contact plug), partly with
Touchscreen AD-ID: A314177 More Infos click here
Palletierer, SMB, 201, , Palletiert e.g. Kartons(z.Zt. 330x199x125) in
different luggage samples on europalletten. AD-ID: A314194 More Infos click here
Hoisting platform, maker Zippo, Type 1250, Zippo GmbH, Offenburg, 1250, This is a used hoisting platform, manufacturer Zippo, type 1250 with usual second hand marks.
Manufacturer: Zippo GmbH, Offenburg
Type: 1250
Fabr. No.: 92348
Constr. Year: 1995
Elevation height: approx. 1,8 m
Lifting cap.: approx. 2,5 t
Length x width x height: approx. 0,55 x 0,40 x 2,85 m
Sheet:
Length: approx. 1,50 m + 0,15 m intake
Width: approx. 1,00 m + 0,22 m drive-up
Height: approx. 0,06 m + 0,04 m drive-up
Technical data as specification by producer, errors excepted. The offer is non-binding, subject to prior sale, inspections possible after agreement. More information on inquiry. Price plus sales tax on top free ex location. Location: Stuhr / Germany Price: 1.150,00 € net ex work
Oil feed pump, IKL, 41.015.5.L.L.V.W.G-M3/5, , delivery 15 L/min.
pressure 5 bar of engine performance 0,75 KW with control cabinet AD-ID: A317224 More Infos click here
Three-phase motor/electric motor , RFL, 45 k, , HR-REF-1439 kind of
machine: high performance electric motor/three-phase motor
manufacturer: RFL year of construction: 1970 weight approx.: 1,000 kg
of mass approx.: L = 1,000 mm B = 700 mm H = 650 mm connection: 380 V
engine performance: 45 KW rated current: 86 A speed: 980 U/min IS
class: E wheel: 350 x 150 mm last employment: condition served for the
drive of a reciprocating saw: a little run stored before 4 years in
the ready for use condition more easily flight rust beginning price:
990, - euro net location: Region Nienburg/Weser shipping equipment
locally: available dismantling, loading and transport are task of the
buyer. The trading firm Ravensberg organizes if necessary gladly the
loading/transport of the commodity. AD-ID: A365565 More Infos click here
Chain course 500 kg with chassis, Nam Sung, , , Made in Korea, 380 V; chain length about 9 m, 2 Hubgeschwindigkeiten; dismantled from disused factory, was to the end in use, may unfortunately aktüllen state in the function does not consider me as the electrical skills missing, in the box is a time defective relay AD-ID: A320860 More Infos click here
Promotion gutter , IFE G.m.b.H, E250x1250 TS100, , It has an IFE electrical operating box. Been suitable for stepless dosage of dust and Koernchen. AD-ID: A367269 More Infos click here
Heavy load platform car 16 x 3 m, carrying capacity 20t , , , , 1 heavy load - platform car, carrying capacity 20 t, platform size 16 m x 3 m, rail-bound, with man man DEMAG driving drives, manufacturer IMG, Bj. 1995, good condition, holzbeplankt. AD-ID: A373247 More Infos click here
conveyor belt N.N. (art#5749), N.N., , Machine: N.N. 8100x500 (conveyor-belt) Description: conveyor belt 8100 x 500 mm Year: 1995 Price: 2.400 € contact: Mr. Bernd Eschelbach, AD-ID: A400329 More Infos click here
MKZ.315 T + R electronics regulation f. , T + R Electronic , PK600, , used regulation company T uses servo actuators + R electronics from an industrial firm dissolution. Type: Universal program A, similar regulation with linear dynamic cam switching device for servo actuators and hydraulic drives, number/exits: 32/24, tension 11 - 27V. inclusive. detailed operating instructions. AD-ID: A326507 More Infos click here
Centrifugal pump water pump 300 L/min. , Lowara, CEA 210/5, , flow 120-300 L / min-H = 28.5 - 23 m-2.35 kW engine power operating voltage 380-volt pump stainless steel housing with switch AD-ID: A397067 More Infos click here
Chain hoist Typ: DE 0.71/4, Load 750 kg, DEMAG, DE 0.71/4, It is about a used chain hoist DEMAG, Type DE 0.71/4 with usual second hand marks.
Producer DEMAG
Type DE 0.71/4
Serial-number 274458
Load approx. 750 kg
Lift approx. 8 m
Lift speed approx. 9,5 m/Min
% ED 25 – 50 ~ 0,7 cos
supply 220/380 V 8,8/5,1 A
motor 1345 U/Min
Technical data as specification by producer, errors excepted. The offer is non-binding, subject to prior sale, inspections possible after agreement. More information on inquiry. Price plus sales tax on top free ex location. Location: Stuhr/Germany Price: 450,00 Euro net
, AD-ID: A448886 More Infos click here
Homogenisator waste water pump with integral chopper , Feluwa Faekalex, Homogenisator 104 124, , 4 KW engine power speed 1700 1/min AD-ID: A344808 More Infos click here
ABUS gantry crane/crane type ELV, 3,2t , , , , load: 3,2t; Span:
6,85m; Crane track: 29m; Hakenhoehe: 3,3m; incl. electrical equipment;
Lifting gear execution: Push pull cable; Control over hanging aster,
which displaceable along the overhead travelling crane is arranged;
Overload safety device; Year of construction: 2000 AD-ID: A413631 More Infos click here
Roller race propelled approx.. 60 m , Transnorm System, TS, , Approximately 60 m angetr. Roller track (aluminum frame) Förderbreite 400 mm consisting of several units such as TS-6330-021 brake and Beschleunig TS-6400 On or excluding. Stopperusw TS-6900. also retail sale AD-ID: A345625 More Infos click here
electric chain hoist , DEMAG, Pk 2 N-F, , 500 kg load capacity lifting speed 5 m / min Feinhub 1.25 m / min motor 0.5 / 0.13 kW with chassis DEMAG EU RU 5 Pk 1100 kg load capacity Built in 1989 for Traeger width 130 mm AD-ID: A437502 More Infos click here
Roller race , , 35,00 EUR pro Meter (700 m am Lager), , Rollenbreite: 500 mm of role diameters: approx. 70 mm role distance: 200 mm (role center to role center) Foerderhoehe: 300 mm The courses are detachable on a single rack of 3m Also single delivery (minimum quantity 9 m) The machine can be visited and tested after date arrangement at any time. Supply abroad possible location: Hanover (Laatzen) AD-ID: A385043 More Infos click here
Trough snail , , , , auger with 7000mm lengthens, trough diameter
250mm, above openly and after 6750mm down openly AD-ID: A410358 More Infos click here
Abwasserschredder for kitchen rinses , Waste King, 750-1 3/4HP, , Abwasserschredder for kitchen sinks from the gastronomy AD-ID: A344138 More Infos click here
Roller race propelled , Venjakob, 2000 x 6500 mm, , Förderbreite 2040 mm Förderlänge 6500 mm Overall width 2200 mm roll diameter 100 mm spacing 250 mm AD-ID: A345635 More Infos click here
S056 Haake safety switching border HSC 85,02 , Haake , , , you offer
switching border company Haake from an industrial firm dissolution on
an unused safety. Type: HSC 85,02 length 4200mm x height of 100mm
Vmax. 50V AC, 75V DC, max. 0.5A manufacturer data: Our switching
borders consist of in row switched, mechanically obligation-opening
opener contacts in form of a contact chain. Currentleading shoes and
isolating intermediate elements (wedge roles) are alternating lined up
on a bungee cord cord. The shoes are squeezed together by pre-loading,
and the ruhestromkreis is closed. With manipulation over the
wedge-shaped intermediate elements at least one of the pairs of shoes
are separated and the stromleitung is interrupted. The switching
border can be fetched with us in 45527 Hattingen/Ruhr. The buyer can
assign also a forwarding business. We ship free of charge with a
fork-lift truck. AD-ID: A349341 More Infos click here
ROLLER RACES , , , , standard design: Angle 80/40/5 role sharing mm 200 mm roll diameter 80 mm x 2 stole blank A12E10 Einlegrolle (diameter 12 mm) Overall length 510 mm, jacket length role 500 mm height 300 mm + / - 25 mm, walk: 1 " Pipe with screw M 16 on foot plate welded painted, RAL 6011-green, sustainability of current per meter about 400 kg - depending on the version-In the case of price inquiries please detail: desired type, quantity, height, etc. AD-ID: A346058 More Infos click here
Compressed air-driven double membrane pump , WILDEN, P100 ADVANCED PROFLO, , height of 279 mm
broad 234 mm of depth 200 mm weight approx.. 5 kg air intake 1/4"
Industrial union intake 1/2" Industrial union pressure connecting
piece 1/2" Industrial union suction height 4.5 m drying 9.3 m wet
Huhvolumen 0.10 l max. delivery 57 l/min. max. grain size 1.6 mm of
double membrane pump to promote the most different liquid media, also
as submerged pump applicable AD-ID: A403470 More Infos click here
Chain conveyors , HÜMA, HKF50-5000, , chain-promote width 500 mm, height of
500 mm, length 5000 mm. For hogged woods and splinter transport.
Remarks in other lengths possible. Inquire. AD-ID: A429475 More Infos click here
To direct current motor 60 KW , ABB, DHP 160-4L, ,
achievement 60 KW of number of revolutions to 2000 U/min wave 48 mm of
safety class system IP 23S data see photo vehicle identification plate
along specially cooling blower Tacho weight 275 kg AD-ID: A402708 More Infos click here
Linear drive electrical remote cylinder , Servomech, ATL 25 C800, , direct
current motor 24 V stroke 766 mm of piston rod 30 mm of overall length
center pin brought in 956 mm of overall length center pin driven out
1722 mm along adjustable magnetic limit switches (still several
available) AD-ID: A357169 More Infos click here
Heavy load platform car, 16 x 3 m, carrying capacity 20t , , , , 1 heavy load - platform car, carrying capacity 20 t, platform size 16 m x 3 m, rail-bound, with man man DEMAG driving drives, make IMG, Bj. 1995, good condition, holzbeplankt. AD-ID: A359948 More Infos click here
Linear drive toothed belt axles , Hauser Parker Hannifin, HLE HPLA (6 Stueck), , -linear drives with belt axis of unused warehouse resolution with surf-gear piece -6 AD-ID: A394710 More Infos click here
Scherenhubtisch , Trepel, E 20/16, , Capacity: 2000 kg operating pressure: 160 bar height: 2000 mm table length: 3000 mm Table Width: 800 mm AD-ID: A452491 More Infos click here
Vibration dosage pipe , IFE, B160x1900 TS 100, , you has a vibration operating box,
suitably for stepless dosage of dust and pellet AD-ID: A366744 More Infos click here
Roller race 90 cm if necessary M. transverse shift car , , , , about 200 meters of roller race. Height about 46 cm. Spreads 90cm. Role distance center/center 20cm. Role diameter about 7 cm If necessary can be bought transverse shift cars with. The frameworks are in a very good condition, the roles have partial surface rust Partial sale possible The roller races are sold as seen without any warranty Intermediate sale and mistake reserve Partner: Mrs. Rogel AD-ID: A442538 More Infos click here
Shears elevating platform 4000 kg , Trepel, S 40/20, Hub 1910 mm, , - Carrying capacity 4000 kg - platform 4350 x 1000 mm - Hoehe brought in 390 mm - Hoehe driven out 2300 mm - operating pressure 220 bar AD-ID: A388078 More Infos click here
To electric motor (spare engine of TOS centre lathe) , ELMOR Gdansk, PCOAN14/4-MIS2, , -performance 14/16 KW-speed 2800 rpm-class protection IP23 operating voltage 440-volt further information see photo name plate AD-ID: A397404 More Infos click here
Belt conveyor, WIRA, H800 (15 m) , Conveyor length: 15 m
Belt width: 800 mm
Working width: 650 mm
Flights height: 90 mm
Fequency speed control, AD-ID: A383046 More Infos click here
belt conveyor, WIRA, H800 (12 m), Conveyor length: 15 m
Belt width: 800 mm
Working width: 650 mm
Flights height: 90 mm
Fequency speed control, AD-ID: A383049 More Infos click here
VA-Foerderband , Koewa, 7,5 m lang / bis 4 m hoch , , KOEWA Foerderband based on chassis, hydraulic hoehenverstellbar, length 7.5 m / Verladehoehe to 4 m, VA band frame from stainless steel, Oelhydraulischer drive tractors on hydraulics, gemuldet strap, belt width of 50 cm, tulips profile band drums and new storage ! AD-ID: A437691 More Infos click here
Electric motor 110 KW, 1465 U/min B3/B14 , Loher, SI 280S-4, , achievement 110 KW of number of revolutions 1465 U/min wave 80 mm
tension 380 V of safety class system IP 23 weight 534 kg AD-ID: A402700 More Infos click here
Conveyor table , Walter Theis KG Siegen, FB 3001, consisting of 11 single conveyor belts
8 x 8 cm, 3 x 27 cm
Motor: 1,5 Kw / 380 V
Altering transmission manual
Speed: 0,25 - 1 m/sek
with an pneumatically out hoist having been engaged
Length: 1700 mm
Breadth: 3300 mm, AD-ID: A390185 More Infos click here
Centrifugal pump water pump 51m /h , Grunfos AEG, LP80-200/180 A-F-ABBUE, , - Mechanical handling capacity Q=51 m /h - H= 42 m - engine performance 15 KW - number of revolutions 2940 1/min AD-ID: A442837 More Infos click here
Hydraulic cylinder , , 210/110/1000, , -piston diameter about 210 mm-diameter piston rod 110 mm hub around 1000 mm AD-ID: A397927 More Infos click here
Gear motor electrical gear motor hollow shaft , Bauer 2,2/3KW 35/70 U/min, DP2A42KFG3-111 309K, , -2 speeds of 35/70
1/min achievement 2.2/3 KW of hollow shaft 45 mm -2 pieces available AD-ID: A400842 More Infos click here
Electric motor 90 KW , BBC, G00X 250 M4 AA, , engine
performance 90 KW of number of revolutions 1465 U/min wave 75 mm of
safety class system IP 23S design B3/B14 weight 415 kg AD-ID: A401868 More Infos click here
Conveying system Krifft & Zipsner Maschinenbau, Krifft & Zipsner Maschinenbau, Palettenspender/Sammler mit Drehteller, Product description:
The complete haulage system of the Krifft & Zipsner Maschinenbau consists of 1 pallet donor, 3 roller racs, 1 rotation plate inclusive roller race and the electrical control (switchgear cabinet etc.) of 8 chain conveyors. The system is particularly well suitable when using palletizing or robot plants. With this system production processes in your enterprise can, by which pallet supply up to the pallet acceptance, are optimized and auomated.
Product data:
Type of pallet:
Width: 800-1200mm
Length: 1200-1600mm
heigth: 140-150mm
Technical data:
Mains voltage 400V, Frequency 50 Hz, Control Voltage 24 VDC, Connected load 9KW, Rated current 20A, Inlet safety device 35A, Air connection 5-7 bar,
Please contact us for further information and photos!, AD-ID: A408336 More Infos click here
Direct current motor 33 KW , Demag, GCM 225 D3/0803, , engine
performance 33 KW max. Number of revolutions 1870 U/min drive shaft 60
mm flange execution (B5)-mit brake-inclusive. Number of revolutions
price increase AD-ID: A408355 More Infos click here
Stacker engine with transmission electric motor direct current motor , Steinbock, R125/0,8-619/563-210-51, , tension 48 V of achievement 0.8 KW of
number of revolutions 2755 U/min along Cyclo transmission type XFMG3 AD-ID: A408421 More Infos click here
Hydraulic pump 48 V direct current , Eckerle / Thrige-Titan, IPF2 -11, , type pump
Eckerle IPF2-11 633,602 type electrical motor Thrige titanium, 48 V,
achievement 7.3 KW, number of revolutions 3100U/min AD-ID: A408409 More Infos click here
Kiespumpe 120 KW , Habermann 250, Habermann 250, , kiespumpe with electrical motor 110 KW, Bj.
88 with jet pump without engine, 2 rope hoists, 800 m /h AD-ID: A418021 More Infos click here
Spiral-vibration Conveyor Vibra, AEG, , manufacturer: AEG
height: 3,75m
diameter: 1,10m
with cooling
very good condition
visitable in our stock, AD-ID: A410101 More Infos click here
Shears lifting platform , , Hubkraft ca 4 t, , hydraulic shears lifting platform,
dead weight approx.. 3 t, table mass: Width 1500 mm/length 3000 mm,
piston force approx.. 4 t vertical lift to max. 1400 mm, depth
approx.. 400 mm with own hydraulics AD-ID: A436947 More Infos click here
Lathe fixture ROTOMAX carrying capacity 50,000 kg , , , , rotary device type ROTOMAX (on the photo red) with storage rack for the rotary device (on the photo blue), bearing 50,000 kg, Bj 1995, very good condition, Brand: Vetter conveyor, P = 4 , 4 kW, weighing 4,300 kilograms, Raddistanz 4,000 mm, inclination angle of 20, speed 2.6 m / min. AD-ID: A425259 More Infos click here
Railway loading and reloading with Lock, , , Bahnverlade and unloader 1x Rangielock including: Technical data on request
1) operation
The railway loading and unloading is located in the area of Bahndammes, located in the western area of the land is located. The facility consists of promoters, bands and tape scales, the technology necessary to Stahltragkonstruktionen mounted. The unloading of wagons took place on the hydraulic Entladebunker. In the area along the side Entladebereiches are Prallwände appropriate that such forward the conveyor in the deduction promoters (chain conveyors), which the lower end of the Flachbunkers formed. The lignite was with the chain conveyor from the bunker ausgebracht. The chain has on a conveyor belt conveyors downstream fallen, this has spent the coal to the open space outside the unloader. The tracks of the discharge will have Gleisabfangkonstruktion. Within the unloader is the tax control for the entire machinery of the fuel processing plant. The plant is described complete with a steel structure enclosed with the trapezoid sheet disguises.
The railway wagon loading is as follows. After mixing the substances, the product per wheel loaders in the task funnel spent. With the spindle Dosierschiebers the thickness of the layer Fördergutes on the following Dosierband RA-3001. About the Dosierband accordance with the requirements of the conveyor to the following Zuführband abandoned. About the Zuführband is the task of Fördergutes on the Eckturmband. This conveyor transports the product mix from the mixing hall in the transfer station in the corner tower. With an installed beltweigher in the Sponsors will Verlademenge recorded and transmitted to the control center reported. By Verladeband will then follow through pants slide loading of rail wagons with the help of Planiervorrichtung evenly filled
Bunker-deduction system: Weight: about 30.67 t
Bunker deduction promoters Weight: 22.32 tons 1 x Förderkette Length of 40.49 m Weight approximately 5.35 t Motor + gear Weight 3t including chain tensioning device + portable hydraulic unit Conveyor belt including propulsion and clamping station including Aufgabeschurre, control and Prallbleche including drive-.Umlenk, bend drums + Volume scaffold
Beltweigher
Enclosure: Total weight: 50 t Steel construction, stage documents, railing Weight: about 40t Keystone brass casing, doors, rain gutter accessories Weight: about 10t
Planiereinrichtung: Weight 9t
Dosing and gears Total weight ca.95t Funnel task Dosierband, belt, Zuführband Eckturmband Verladeband
1 x beltweigher Weight about 0.5 tonnes
1 x control: Total weight: about 7t Heating, air conditioning and switching Dimensions: 2.50 x2, 70x4, 50m, AD-ID: A443616 More Infos click here
Hydraulic cylinders , -, 280/250/110, , -piston diameter about 280 mm-diameter piston rod 110 mm hub about 250 mm adjustable attack (thread) -2 units available AD-ID: A453714 More Infos click here
Hydraulic unit , Bosch, , , Bosch hydraulic unit 400 bar 15 KW with 2 cooling units Fa Steinebronn L 112/114 OM Built in 1994 without pump AD-ID: A447749 More Infos click here
Vario adjustment wheel , -, hydraulisch, ,
Varioriemenscheibe steered to the assembly at drive shaft
hydraulically AD-ID: A421500 More Infos click here
Shearing elevating platform , ALTEK, , , year of construction 2005 unloaded
weight 4700kg tension Un(V) 400 50 cycles per second of achievement
18.5 KW operating pressure 185 bar of nominal load 3,500 kg AD-ID: A423141 More Infos click here
Hydraulic unit / aggregate , Orsta Hydraulik, 100/16-400,0/0,1, , hydraulic unit Manufacturer: Orsta hydraulic Type: 100/16-400, 0/0-1 Built: 1982 mass: 605 kg Pressure: 16 MPa Engine: VEM 37 kW total mass: 1.80 m long x 0, 75 m wide x 1.30 m high AD-ID: A444934 More Infos click here
500 kg chain hoist with rolling scaffold, Demag, PK2-F, , with more
searchingly high-strength, more high-wear-firmly, special chain 5x15;
Type: PK2-F; Fabr.Nr: 1569885; Bj 1969; Load: 500Kg; Haupthubgeschw. 5
m/min; Feinhubgeschw. 1,25 m/min; Engine: 16/5P2-8K; 0,5/0,13kw. The
chain course is operated with three-phase alternating current and is
functional. Dissolution of who place: Metal milling cutter,
stahlregale, div. Tool, tank and more zubhoer. AD-ID: A426366 More Infos click here
Capacity: 820 tons per hour Particle size: 0 - 400 mm Speed: 0.205 m / s
Construction data: Chain Size: 26 x 92 mm Number of conveyor: 6-fold Sprockets, teeth Number: 8 Speed: 8.29 UPM Make: RUD Motor: B3 315 M with 132 kW Make: Siemens Clutch: Voith Type 487 TVJF Transmission: Type 450 KDH make Flender Hydraulic chain clamping device ND 210 consisting of 2 standard cylinders and a portable hydraulic unit. Verstellweg 250 mm
The deduction promoters is new and has no wear wear. Full documentation and maintenance manual. Total weight: about 32 t, AD-ID: A445034 More Infos click here
Heavy load roller race 60 cm , , , , 1000 meters of heavy load roller race Height about 45 cm Width about 60 cm Role distance center/center 13 cm Role diameter about 8 cm Partial sale possible The roller races are sold as seen without any warranty Note: In the first picture green Fue�e is to be seen, these belongs not to the roller race. Intermediate sale and mistake reserve Partner: Mrs. Rogel AD-ID: A442537 More Infos click here
Roller race , , , , 2 roller race segments A 7 m and 2.80 m roles 850 mm
long diameter 80 mm with drive and engine of pictures on request
request for offer AD-ID: A432497 More Infos click here
Strut cylinder 4 pieces , mit Stuetzrollen, 140/100/600, , - Piston diameter 140 mm - piston rod 100 mm - stroke approx. 600 mm - with supporting rollers AD-ID: A434271 More Infos click here
Strut cylinder with hand pump 3 pieces , mit Stuetzrollen, 130/100/700, , - Piston diameter approx. 130 mm - piston rod 100 mm - stroke approx. 700 mm - with supporting rollers - each cylinder with hand pump AD-ID: A434274 More Infos click here
Strut cylinder with hand pump 2 pieces , -, 120/100/300, , - Piston diameter approx. 120 mm - piston rod 100 m - stroke approx. 300 mm - in each case with hand pump AD-ID: A434276 More Infos click here
ABUS gantry crane/crane type ELV, 3,2t , ABUS, ELV, , Load: 3,2t; Span: 6,85m; Crane track: 29m; Hakenhoehe: 3,3m; incl. electrical equipment; Lifting gear execution: Push pull cable; Control over hanging aster, which displaceable is arranged along the overhead travelling crane; Overload safety device; Year of construction: 2000 AD-ID: A440025 More Infos click here
Direct current motor gear motor , Baumueller Nord Getriebe, -, , - approx. 2 KW - wave diameter 30 mm of -6000 rpm/250 rpm AD-ID: A440769 More Infos click here
Direct current motor gear motor , Baumueller Nord Getriebe, DSG 70-M, , -6.8 KW - Hollow shaft diameter 40 mm of -4000 rpm/155 rpm AD-ID: A440773 More Infos click here
Roller race for heavy loads (150m , , , , there are about 150 meter roller track for heavy loads. The stock is divided into two types in the rail profile (holder of roles) slightly. Type 1: 104.4 meter available - 36 roller elements each 290 cm (a 15 rolls per box) - 4 roller elements depending 157.5 cm (a 9 rolls per box) The rail section is L-shaped. Type 2: 50.4 meter available - 10 roller elements for each 300 cm (a 15 Per roles [...Technical data truncated] AD-ID: A442771 More Infos click here
Roller race for heavy loads (150m , , , , Approx. 150 run meters of roller race are present for heavy loads. The existence divides into two types in the Schienenprofil (carrier of the roles) slightly differs. Type 1:104,4 run meter available - 36 role elements to ever 290 cm (A 15 roles per field) - 4 role elements to 157.5 cm each (A 9 roles per field) the Schienenprofil is L-shaped. Type 2:50,4 run meter available - 10 role elements to ever 300 cm (A 15 roles per field) - 5 role elements to ever 200 cm (A 10 roles per field) - 6 role elements to ever 150 cm (A 8 roles per field) - the Schienenprofil a stage exhibits and is well stackable 2 role elements to 70 cm each (A 4 roles per field) from there. The individual elements cannot be combined among themselves, however type-spreading smoothly. For both profile types the following characteristics are valid: - Width 93.5 cm - Role distance: 20 cm (measured from role center) - Role diameters: 8 cm - Weight per role: 4.2 kg - Total weight per run meter: approx. 40 kg This concerns heavyweight runway loadable up to 1000kg. The year of construction is unkar! Past use for the transport and internal far distribution of pieces of furniture and marble slabs. The moreover one are present various switches, control engines and transmission parts for this plant. The roles have something flight rust, are however in a good condition. All roles are low-friction the offered pallet course let themselves also without drives as a force of gravity pallet course construct. The application type are various; nearly all conveying engineering problems can be solved with this plant. This plant is offered not assembled from stock. Only self-service in Neutraubling with Regensburg. Pictures on request by mail. AD-ID: A442779 More Infos click here
Column swing crane , UNITRAS - Magdeburg, , , + radius: 7000 mm + hooks Height: about 5000 mm + height: about 6800 mm + sustainability: 3200 kg + Net weight: about 4000 kg + winch: Balkancar, Bj 1972, lifting capacity 3,200 kg, height 12 m, the net weight: 360 kg, with trolley + engines and winch are not checked, to create new wiring to the winch missing the panel and the Steürkabel AD-ID: A451740 More Infos click here
Lifting table, hydraulic, 200 kg, Edmo Lift, Typ TRD200, It is about a used lifting table, manufacturer Edmo Lift, Typ TRD200, with hydraulic single-hand-control and emergency stop, with usual second hand marks. Lifting capacity approximately 200 kg. headroom retracted approx. 280 mm, extendet approx. 1470 mm at a lift with approx 1190 mm. Lift-time approx. 14 seconds. Table size approx. 900 x 600 mm. Supply: 400 V, motor: 0,37 kW.
Technical data as specification by producer, errors excepted. The offer is non-binding, subject to prior sale, inspections possible after agreement. More information on inquiry. Price plus sales tax on top free ex location.
Role-Driven Electric Railway , , , , approximately 24 metres roller track electric. Width 870 mm. Lengths of 980, 1470, 1970 mm. 1 x drive unit. Roll diameter 6 cm role spacing center center 8.2 cm. Between sales and Irtum reserved. The article is sold as is without warranty. AD-ID: A451457 More Infos click here
Role-Driven Electric Railway , , , , approximately 23 metres roller track electric. Width 1335 mm. Lengths 2525, 4155, 5940 mm. Between sales and Irtum reserved. The article is sold as is without warranty. AD-ID: A451458 More Infos click here
Role-Driven Electric Railway , , , , approximately 15 meters roller track electric. Width 780 mm. Motor width 970 mm. Length 2100 mm. 5 segments without engine. 2 segments with the engine. Between sales and Irtum reserved. The article is sold as is without warranty. AD-ID: A451461 More Infos click here
