Destacking plant Wamhoff Wam i e b, Fabr. NR. 950300, , , , with inlet roller course, Rollenbreite 700 mm, destacking station as well as role transverse conveyor AD-ID: A70342 More Infos click here
Workpiece returning device, WT Foerdertechnik, 660, - backfeed length 6570 mm
- back feed width 1470 mm
- new device price approx. 28000 EUR, AD-ID: A407659 More Infos click here
Conveyor to approx. 1400mm mobile promote on roles can easily to each, , , , conveyor for promoting
sections and splinters horizontal volume approx. 2000 mm of length
diagonal volume 1500 mm of length belt width approx.. approx. 1200 mm
mobile on roles can be rolled to 250 mm of hoisting depth easily to
each machine AD-ID: A374182 More Infos click here
Venjakop , Venjakop, , , Venjakop rubber conveyor length 3000 mm work width 1300
mm work width 1350 mm feed motion adjustable by 6-20 meters of min AD-ID: A367257 More Infos click here
Conveyor conveyor Huettenhoel , Huettenhoelscher, Auslaufband, , discharge conveyors 380 V 50
cycles per second of Bj 93 very good condition, without the wood
conveyor lying illustrated in the photos on the conveyor. Against
requirement! AD-ID: A425853 More Infos click here
Turning station, Venjakop, Venjakob Drehstation Typ VDK / M 2500, , Year of construction 1979 add magazine filling laengs/crosswise add workpieces of max. 2500 x 800 mm of min. 300 x 200 mm (Moebelteile) normal plate thickness 10 - 30 mm consisting of: a propelled roller race also diagonally arranged roles and adjustable Laengenanschlag with plastic edge Laenge 3. 020 mm work width 800 mm height 1000 + - 50 mm of roles 80 mm of role division 150 mm The roles are with smooth PVC - covered and continuous axles diameter 20 mm, reciprocally provided with Praeszisions grooved ball bearings, have heat shrink sleeve as pedestal bearings install the capstan effected over maintenance-free and run-calm bevel gears Speed of 25 - 75 m/min infinitely variably - of a mechanism to the rotation of the plates around 90 during going through by means of specially rubberized Kugelrollen (divided execution, Mantellaenge 700 mm) adjustable on the plate thickness a propelled roller race for the cross transport of the turned roles of Laenge: 1600 mm work width 2500 mm total width inclusively Switchgear cabinet 3600 mm of role division 100 mm of roles and drive in same execution as however with handy softly PVC hose covered speed for 10 - 50 m/min above infinitely variably For the delivery into the magazine of the following machine propelled flat straps are attached To this delivery belts are aligned the plates in direction of travel Riemenlaenge: 800 mm Intake course, rotation device and discharge volume are in each case propelled separately. All drives are infinitely variable (range of control 115) Distance between the two chain courses pre and machines downstream 5070 of the mm (Einlauflaenge) Incl. switchgear cabinet with shining controls and Verriegelungskontakten machines more fuer pre and downstream, sowe contactless disturbance over being awake AD-ID: A210092 More Infos click here
Saving EDT, Bargstedt, PWH 21/ER/25/10, , Year of construction 1992 Technical data workpiece dimensions: max.2500 x 1000 mm min. 300 x 280 mm Thick 10 - 40 mm of kind of workpiece beating up hurry furniert or laminates. Chip board roughly weight: max. 50 kg of achievement: 12 clocks /min, with 2 parts one behind the other = 24 parts/min Fixed edge left Surface material got over 10 mm of work yards machine I: approx. 920 mm Stapelhoehe: min. 300 mm of pile lower edge starting from Fuessboden, max. 1900 mm of pile upper edge starting from floor, thus effective Stapelhoehe 1600 mm of inclusive. Already plate Pile arrangement: 2-spurig Overall height: 3450 mm Operating voltage: 380 V, 50 cycles per second. Control voltage: 220 V, 50 cycles per second. according to VDE lacquer finish: Robustik Strukturlack green mobile one of parts: Robustik Strukturlack yellow Foundation: Industrial concrete floor steal-reinforces, thickness 150 mm, quality B 25 TB 21/ER/25/10 saving EDT feeding station digless, on one side right to feeding of manufacturing routes (fixed edge left). up to 50 kg weight and 12 clocks/min. 1 propelled pile roller race, set up before the feeding station (V=12 m/min) 1 lifting platform with propelled pile roller race. Already disk disposal for single plates in transportation direction over Roellchenschienen, already plate withdrawal manually (V=12 m/min). (Pile change time 60 seconds) 1 vacuum August car for minimum workpiece dimensions 300 x 280 mm, which drives at 2 rails (crank gear). 1 stripping wall with manual thickness attitude. 1 workpiece joggle station. 1 placing roller race (V=18 - 90 m/min.) 1 inlet roller course with inclined/slanted supporting rollers for following machines. (V=10 -50 m/min). Electrical control for the entire operational sequence, implemented in Schtuetz technology (Kloeckner Moeller). Switchgear cabinet with control tablet, directly at the machine set up. Total total: 13/20 KW consumption of air: 13 NL/Takt (1/2 R) Betribsdruck: 5 bar Operating voltage: 380 V, 50 cycles per second. Control voltage: 220 V, 50 cycles per second. according to VDE installs Number: 5120 1 pieces of 2 Spuriges feeding L = 2500 with additional digging rust in the placing course. Maximum workpiece length 2500 mm. Number: 6090 1 pieces of SPS control make Siemens with fault-tracing Number: 5082 1 pieces of pile change time 30 seconds with Stapelhoehe 600 mm and more. AD-ID: A210100 More Infos click here
saving EDT, Bargstedt, TBH/21/EL/30/12, , Saving EDT filling year of construction 1991 machine NR.: 0-280-01-1085 Technical data: --------------------------- Workpiece dimensions: max. 3000 x 1200 mm min. 300 x 240 mm Thick 10 - 30 mm Kind of workpiece: Beating up hurry furniert or laminated Weight: max. 50 kg Achievement: 12 clocks/min., with 2 parts one behind the other = 24 parts/min. Fixed edge: left Surface material projected: 10 mm Arbeitshoehe machine I: 930 mm Stapelhoehe: min. 300 mm of pile lower edge starting from floor max. 1900 mm of pile upper edge starting from floor, thus effective Stapelhoehe 1600 mm of inclusive. Already plate Pile arrangement: 2-spurig Overall height: 3450 mm Operating voltage: 380 V, 50 cycles per second of control voltage. 220 V, 50 cycles per second according to VDE Lacquer finish: Robustik Strukturlack green mobile one of parts: Robustik structural lacquer yellow Foundation: Industrial concrete floor steal-reinforced, thickness 150 mm Quality B 25. 1 TBH21/EL/30/12 saving EDT filling station digless, on one side left for feeding production lines, up to 50 kg weight and 12 clocks/min. 1 propelled pile roller race, set up before the filling station (V = 12 m/min.) 1 lifting platform with propelled pile roller race, already disk disposal for single plates in transportation direction over Roellchenschienen, already plate withdrawal manually (V = 12 m/min.) (pile change time 60 seconds.) 1 vacuum August car for minimum workpiece dimensions 300 x 280 mm, which faehrt at 2 Fahschienen in transverse direction (crank gear). 1 stripping wall with manual thickness attitude. 1 workpiece joggle station 1 placing roller race (V= 18 - 90 m/min) 1 inlet roller course with inclined/slanted supporting rollers for following machines (V= 10 - 50 m/min. ) 1 electrical control for the entire operational sequence, implemented in contactor technology (Kloeckner Moeller) Switchgear cabinet with control tablet directly at the machine set up. Total total: 13/20 KW consumption of air: 13 N1/Takt (1/2" R) Operating pressure: 5 bar 2-spuriges feeding L = 3000 with additional digging rust in the placing course max. workpiece length 3000 mm SPS control make Siemens with fault-tracing with pallet magazine Msch. - NR.: 0-289-01-1145 without distribution station AD-ID: A211610 More Infos click here
Little, Weinig, Typ LKF/1H-9055 R, , 1 winy angle delivery year of construction 1995 Along and transverse promoter LKF/1 applicable after Kehl, plane and milling machine with a max. feed speed of approx. 22 m/min. Machine stand from steel tubes welded, pylons screwed. Work width: depending upon desire lacquer finish: Ral 7032 external length: 2,200 mm of promotion length: depending upon type work height 860 mm of 50 mm Technical description: Longitudinal transport: 1 roller race 2,200 mm long, supporting rollers 160 mm during link execution, 250 mm during legal argument, galvanically galvanizes, 50 mm. Drive: Gear motor over round belts pneumatically lowerable, Stroke 25 mm, conveying speed approx. 30 m/min. Cross transport: 7 transportation drive belts 17 mm wide, with bright edition in Plastic profiles led. Drive: over gear motor conveying speed approx. 30 m/min. constantly electrical control: Contactor price increase over sensors power connection: 220/380 V, 50 cycles per second of approx. 1 KW compresser air bleed port: min. 6 bar Conveyer system laid out for: Holzlaenge: 250 mm up to 3,600 mm wood widths. 30 mm up to 220 mm of wood thicknesses: starting from 20 mm Wood groove edge: In promotion direction seen at the roller race beginning AD-ID: A212752 More Infos click here
Ziwo vacuum filling station RP-1/RB , Ziwo , RP-1/RB, , technical data:
--------------------------- Weight: approx.. 750 kg total connected
load: 25 Amp compressed air: 6,5 bar air consumption at 6 bar: 200
l/min. max admission-long of the forks: 1400 mm maximum weight of the
parts: 15 kg of pile speed: max. 14 cycle/min destacking speed: max.
14 clocks number of suction cups: 6 to 20 standard diameter of the
suction cups: 40 mm of capacity of the vacuum pump: 25 CUB
stapelhoehe: 1200 mm pile width: 900 mm braking distance empty: 230
braking distance load: 230 adjusting rotation transducers: 1939
Hoechstgeschw.des of car: 1,85 m/sec. lifting capacity of the suction
cup cross beam 30 kg the products which can be processed are felling
trees hurry or wooden plates: max. dimensions: Width 600 mm of length:
2500 mm of strength: 50 mm of caution: ------------ The following
products can lead with the processing with the machine to
difficulties: Formed felling trees hurry.Used materials: ------------------------------------ Mechanical
construction: Welded steel framework from square tube material color:
Yellow ral 1004, anthracite coal ral 7016 different:
----------------------- Mass: 2800 x 1050 x 2400 mm (LXBXH) weight:
approx.. 750 kg of max. Noise level: 68 railway (A), based on the job
connection regulations: ------------------------------- Electrically:
--------------- Prescribed current supply: Tension: 400 V + - 10%
leader number: 5 (3Phasen, protective ground and zero) net grounding:
TN system frequency: 50 cycles per second +/- 1 % in continuous
operation +/- 2 % briefly achievement: 2.5 KW maximum stream: 16 A
Vorsicherung: 32 A - Type slow-acting machine data: Total output: max.
2.5 KW of control voltage internally: 24 V d.c. 2.1 A are supplied by
the control directstarting squirrel cage rotor engines: none AD-ID: A416432 More Infos click here
1656 work piece back transport, WEINIG, RF 15, , transportation facilities consisting of: Qürförderer with 7 transport belt Keystone repatriation operation to the man consisting of 4 roller tracks, not driven length 3000 mm, 800 mm in length, length 1700 mm and 3000 mm in length (technical data according to the manufacturer - without guarantee!) AD-ID: A394653 More Infos click here
Role Tour , , , , Technical data: height 920 + / - 60 mm Length: 6000 mm width: 1100 mm gear rule for feed ruler stop right AD-ID: A452140 More Infos click here
Transverse sliding stage MTQ 10 , , , , the transverse sliding stage
consists of a belt MTB 10/25/06, a motor transverse procedure in
direction. After the korpus ran on the volume, the distribution takes
place according to coding of the pressing of operator on the
respective final assembly volume. In the case of allocation to volume
2 additionally a 180 degree turn takes place, in order to induce the
front of the cabinet to the control side. All movements are controlled
over light barriers and initiators and are concatenated with pre and
mechanisms downstream. Workpiece dimensions: Length max. 2900 mm broad
850 mm work height 850 mm without control can be re-tooled however AD-ID: A405170 More Infos click here
, Vecoplan, Kratzfoerderer und Vibrorinnen, convoyer 500 mm width, 40 m long
S-bend 500 mm width, 10 m long
vibrating trough 400 mm width, 20 m long, AD-ID: A438408 More Infos click here
Elevating platform promotion course transverse promoter , Holzma, Lifttex-HAZ-A, , hydraulic Scherenhuntisch carrying capacity 2000 kg
(with position switch) along more propelled roller race with
transverse promotion thrust Handbedienungsgeraet -Rollenbreite 800 mm
d=80 mm height of min. 370 mm, max. 1600 mm stroke 1230 mm of
dimensions L/B/H 2600/1500//1800 mm AD-ID: A364652 More Infos click here
Back conveyor with pile , Friulmac, FN 2 , , after a four-side planing maschine,
back conveyor with pile unit, feed motion steplessly adjustably,
length 5000 mm AD-ID: A367311 More Infos click here
Finnrose pinchrolls FCB 20 , Finnrose , FCB 20, , propelled role transportation course
length 2000 mm rollenbreite of 1460 role diameters 80 role division
110 mm work height 940 mm AD-ID: A414305 More Infos click here
Korpusaufrichter, pneumatically , , , , roller race 2000 long width 970 mm
of role platform 900 x 970 mm handsteered over valves tilting the
Korpusses is made pneumatic by a hand valve AD-ID: A405300 More Infos click here
Roller table , Rollgang, Rollgang, , role course length 4460 mm of Rollenbbreite 1440 mm
of role diameters 100 (steel rollers) work height 330 mm of motor
propelled AD-ID: A428646 More Infos click here
diagonal roller feed, Wemhoener, W 85 (13982), built in 1978, mach. No. 29
l = ca. 2100 mm, w = ca. 2100 mm,
h = ca. 860 mm, height adjustable by threaded spindles, carriage laterally moveable, infinitely variable adjustabment, roller distance ca. 150 mm, fence left hand No responsibility is taken for the correctness of this information!, AD-ID: A414868 More Infos click here
Ligmatech workpiece feedback type ZHR 15 , Ligmatech , ZHR 15/06/RE, , operating voltage 400V
the feedback "Bumerang" makes possible the
ein-Mann-Bedienung of kantenanleimmaschinen and other machines and
plants in the wood working. From the machine coming workpieces are
promoted upward with the help of a roller to a driven oberdruck, which
carries the parts consisting on a suitable level, of Roellchenleisten.
On this bent level above the work height the parts slide by their dead
weight to the operator back. The driven roller race is equipped with a
turning unit plus oberdruck. This permits to be returned the rotation
of workpieces, which come crosswise from the machine, over 90 and thus
lengthwise can. There is an additional Roellchenbahn crosswise to the
support of larger, arriving parts. These support roellchenbahn can be
hinged away downward, if it is not used. Likewise the bent Roellchenbahnebene can be cut perpendicularly
upward, so that the working on machine without feedback can be used.
Technical data: ---------------------------- Workpiece dimensions:
without turning unit in mm of --------------------- length: min. 300
max. 2200 width: min. 120 max. 1000 thickness: min. 10 max. 60 with
turning unit in mm --------------------- length: min. 300 max. 2000
width: min. 120 max. 600 thickness: min. 10 max. for 22 * * applies
with workpiece dimensions 2000 x for 600 mm when small dimension are
permissible larger thicknesses (not proportionally). Size of the
digging station: 2400 mm lg 1900 mm of Ges.br.
Rueckfuehrroellchenbahn: max. 5000 mm bent level 2.... 4,650 mm broad
turn-up feed speed: infinitely variably 8 - 40 m/min. AD-ID: A417023 More Infos click here
Role Tour , Rollengang, Rollengang, , Volume: 2 Length: 4000mm Width: 1300mm roll diameter: 100mm role sharing: 600mm role coats Length: 1150mm powered by SEW gearmotor AD-ID: A446938 More Infos click here
Lifting platform 4 t , , , , Maximum stress 4 t platform 1200 x 3000 mm of Hoehe to OK platform 400 mm Structure: propelled pinchroll course (Kettenantrieb) Aufbauhoehe 155 mm of dimension 1200 x 3300 mm (on one side supernatant) of role diameters 90 mm of role division 127 mm of Mantellaenge 1090 mm driving motor under projection of the pinchroll course Hydraulic pump defectively, mechanically good condition! Against requirement! AD-ID: A425807 More Infos click here
Propelled roller race , Ligmatech, TR10, , Ligamtech roller race Inclusive angle delivery consists and a putting up station of 4 roller races. The Laenge 2 x 3000 mm, 2 x4000mm the width approx. 1200mm. Role diameter: 64mm role division 120 mm feed motion steplessly 7 - 40 m/min work-hear 870 -1150 mm all data according to manufacturer. Without guarantee. Inspection after arrangement possible. AD-ID: A438846 More Infos click here
