Used machinery offers: Wood working machinery
> Milling
(text-only version)
Subject to alterations and error in the technical details, statements and pricing! All offers are not-binding and without obligation.
Available subcats in the main cat Wood working machinery:
Processing machines
Drilling machines
Lathes
Barkers
Conveying machinery
Milling
Heating
Planers
Edge bending machines
Combined machines
Compressors
Lacquering
Dust Extraction
Presses
Saws
Sawmills
Sharpening machines
Sanders
Mortisers
Drying
Carpentry machines
Joinery machines
Window production machines
Veneer fabrication
Wood shredder
Glue coating machines
Dust extraction
Postforming machines
Brushing machines
Double end tenoner
Destacking device
Finest planers
Chip tray production
Pallet production
Turnery machinery
Finger jointing lines
Lapping machines
Improvement machinery
Staplers & nailers
Coating machines
Door manufacturing machinery
Feed apparatus
Other machinery
Notices & aids
Cutting machines
Structuring machines
Zurichtmaschinen
Kehlmaschinen
Swiveling spindle milling cutter , Martin, T23, , table milling cutter Martin
type: T23 table size: 1065 mm x 940 mm of numbers of revolutions
milling spindle: 3000/4500/6000/9000 U/min engine performance: 4,7/5.7
KW of vertical adjustment of the spindle: 145 mm of spindle diameters:
30 mm swivelling range: -5 to 45 exhaust brake year of construction:
1981
AD-ID: A409629
More Infos click here
___________________________________________________________________________________
TABLE MILLING CUTTER, SCHNEIDER, , , 4-reel Vario-feed, Rechts-/Linkslauf, to 12000 rpm.
AD-ID: A66896
More Infos click here
___________________________________________________________________________________
Milling cutter/table Provm FR 101, , , , with feed motion and sliding carriage
AD-ID: A89347
More Infos click here
___________________________________________________________________________________
Table milling cutter , Baeuerle, , , swiveling spindle milling cutter with feed
apparatus, table size 1160 x 900mm, spindle length 250mm, 30 mm in
diameter, spindle stroke 100mm, numbers of revolutions 3.6.5.10000
revolutions, direction of rotation left/anti-clockwise, notice length
1340mm good condition; Engine was again stored; immediately available
AD-ID: A416096
More Infos click here
___________________________________________________________________________________
Kopieroberfraese, Aldinger, , , machine NR. 47557, year of construction 1968 with
frequency changer engine performance: 3 HP weight: approx.. 130 kg
with much Fraezubehoer
AD-ID: A289758
More Infos click here
___________________________________________________________________________________
Combination machine milling cutter saw planing maschine and drill , ROBLAND , X31, , The machine is quadruple combined and can sows planes to mill and bore. If interest exists calls you me please
AD-ID: A429625
More Infos click here
___________________________________________________________________________________
Table milling cutter , BAEUERLE, SFM, , + machine table extended piece retractable edition engine performance 6 / 7, 5 kW speeds 2.8, 4.5, 5.6, 6, 9, 12000 rpm. Fräsdorn MK 5 (D 30 mm) weighing about 800 kg
AD-ID: A403355
More Infos click here
___________________________________________________________________________________
Table milling cutter, , , , table size: 680 x 900 mm of
wave diameters: 16 mm engine: 3 phases sliding bearing achievement: 2
KW; 2800 U/min.
AD-ID: A288195
More Infos click here
___________________________________________________________________________________
Profile milling pneumatic linear feed unit , SCHLEICHER, S 1300, , max. stroke length (= copying length) 1300 mm feed motion steplessly v. 0.5 - 5 m/min. 3 pneumatic workpiece tension adjusters unueberholt
AD-ID: A422926
More Infos click here
___________________________________________________________________________________
Dove tail milling cutter spline milling cutter, Hoffmann, PU 2, ,
with 2 pneumatic compressor rod min. Workpiece width 10 mm of min.
Workpiece height 8 mm of max. Workpiece height 170 mm of max. Milling
depth 90 mm
AD-ID: A319593
More Infos click here
___________________________________________________________________________________
Milling cutter , Hombak, , , table milling cutter manufacturer Hombak 9
numbers of revolutions, right + on the left of run, spindle 30mm,
large table, notice with sucking off judge
AD-ID: A429579
More Infos click here
___________________________________________________________________________________
Robland table milling cutter , Robland, Typ 30, , 3 HP, 380 V, with pushing
table and extensive accessories (Falzkof, spindle filling rings,
Nuter, etc..)
AD-ID: A404139
More Infos click here
___________________________________________________________________________________
spindle moulder, Rex, 59 F (18316), used
manufactured by Rex
type 59 F
built in 1963
mach. No. 8681/170
foot brake
motor 2 speeds/motor pole switch
4 revs
right hand-left hand rotation
table size 980 x 900
spindle diameter 30 mm
cutter fence with fine adjustment
socket for feeder
exhaust connection 140 x 300 mm
required space ca. l x w x h mm
1000 x 900 x 1100
weight ca. 700 kg
located in 97447 Gerolzhofen
No responsibility is taken for the correctness of this information!
,
AD-ID: A331168
More Infos click here
___________________________________________________________________________________
Milling device for roller shutter insertion groove, STRIFFLER, , Main motor kW 1,2; Type Stationary machine; ,
AD-ID: A241834
More Infos click here
___________________________________________________________________________________
tilting spindle moulder, Panhans, 240 (17973), used
manufactured by Panhans
type 240
built in 1989
mach. No. 182
motor 11 kW
tiltable from -5° to +45°
motor brake
4 revs
3 / 4.5 / 6 / 9,000 rpm
right hand-left hand rotation
table size 2,500 x 800
spindle diameter 30 mm
extended table length
frame support
Aigner integral stop jaw
cutter fence with fine adjustment
incl. digtal LED display
operating panel bottom, tiltable
adjustment electrical
positioning control system f. height u. tilt
digital display for tilting angle - spindle height
socket for feeder
exhaust connection 2x120 mm
required space ca. l x w x h mm
2,600 x 1,400 x 1,200
weight ca. 1,100 kg
total connected power ca. 12 kW
located in 97447 Gerolzhofen
cleaned, function checked,
control revised by manufacturer
No responsibility is taken for the correctness of this information!,
AD-ID: A425300
More Infos click here
___________________________________________________________________________________
TABLE MILLING CUTTER, BAEUERLE, TYP SFM, , 5.5 KW, spindle diameter 30 mm, technically and visually impeccable, ready for use
AD-ID: A106483
More Infos click here
___________________________________________________________________________________
Profile - curve milling unit, Schleicher, (12349), , uses, fully automatic pneumatic
linear feed unit for thrust ring milling for profile strips and swung
beating up hurry, inclusive tischfraesmaschine cutter S 1600, with
exhaust hood for thrust ring milling, 6 different operational
sequences controllable, max. Stroke length 1600 mm, completely with
copying rings, feed speed steplessly 0.5 - 5 m, length of the unit
5600 mm, width 400 mm, 3 pneumatic cylinder for production part
tension, all data by reservation. Stock location 97447 Gerolzhofen
AD-ID: A296502
More Infos click here
___________________________________________________________________________________
TABLE MILLING CUTTER TILTABLE, MARTIN, T 23, , swivel diameter 30 mm spindle speeds 3000/4500/6000/9000 rpm.
AD-ID: A251766
More Infos click here
___________________________________________________________________________________
Cross rung milling cutter, Ulmia, 8202001 (15874), , uses, year of construction 1991,
machine NR. 249, with Elu router MOF 96, 750 W all data without
guarantee! Price from stock 97447 Gerolzhofen.
AD-ID: A244470
More Infos click here
___________________________________________________________________________________
Lengthwise copy shaper, PADE, UINIZE 8T, Workpiece width max mm 360; Moulding height max mm 180; Number of shaping stations 2; Aggregates exchangeable 2; Aggregates per side 4; Total connection kW 42; Weight kg 5.600; Feed max m/min 25; Workpiece feed Belt conveyor; Required space lxwxh 7700x2700x1800; Availablity Short-term, ex location ,
AD-ID: A376439
More Infos click here
___________________________________________________________________________________
Table milling cutter , KOELLE, Typ, , with 3 role feed motion
AD-ID: A382443
More Infos click here
___________________________________________________________________________________
Tischfraesmaschine HOMBAK, , , , engine, 4-Drehzahlen, R + l-run, suction
nozzle D=125 mm,
AD-ID: A135134
More Infos click here
___________________________________________________________________________________
Swiveling milling cutter , MARTIN, T 25, , electrical height u. Swiveling adjustment swivelling range -5 to +45 Numbers of revolutions 3/4.5/6/9000 rpm. Engine performance 5/6 KW of suction nozzles D 135 and 100 mm of plug socket for feed motion weight 900 kg
AD-ID: A348724
More Infos click here
___________________________________________________________________________________
Kettenstemmer , Haffner, KF 20, , engine: 1.5 KW of 2800 U/min.
AD-ID: A388677
More Infos click here
___________________________________________________________________________________
Table milling cutter , Schneider, , , Fräsmotor 3.4 kW, foot brake, 30mm + 40mm spindle, attack with fine-tuning. Speeds 3000, 4000, 5000, 6000, 8000 and 10,000 rpm, R / L-run, electrical some time ago erneürt, outlet for feed. Please note that the PDF file with our terms and order form.
AD-ID: A419344
More Infos click here
___________________________________________________________________________________
Edge rounding milling machine, Hebrock, TF, Milling motor 0.5kW,
Brush motor 0.18 kW, Radius 2.5 and 3.0 mm, buffing, Workpiece thickness max. 45mm,
AD-ID: A268853
More Infos click here
___________________________________________________________________________________
Kettenfraese, Harbs, UKS 65, , Table length 2400 mm, 4 numbers of revolutions, extendable table edition in front, Aigner stop system, 3 roles feed motion WOOD AGO, CPS safety milling hood, weight approx. 800 kg
AD-ID: A227514
More Infos click here
___________________________________________________________________________________
Kettenstemmer , Haffner, , , Haffner Kettenstemmer SPECIAL PRICE
AD-ID: A341776
More Infos click here
___________________________________________________________________________________
FESTO UP of 30, Festo, UP 30, , 2 pneumatics tension adjusters, wave diameter 40 mm work height max. 110 mm work width max. 200 mm of milling/depth of profile 65 mm, engine 5.5 KW, number of revolutions 4300 rpm., spindle diameter 40 mm, friction length 200 mm, flight circle max. 250 mm, foot valve,
AD-ID: A281628
More Infos click here
___________________________________________________________________________________
Round bar milling cutter , Loeser, RF 430, , work area: Diameter 20 -
80 mm feed motion: infinitely variably of 8 - 36 m/min. shortest staff
length: 450 mm driving motor: 11,0 KW, 2900 U/min. Vorschubmotor: 1.5
KW, 1450 U/min. Spindle number of revolutions: 2800 U/min. Suction
nozzle: Diameter 160 mm net weight: approx.. 580 kg
AD-ID: A408266
More Infos click here
___________________________________________________________________________________
Form milling machine, Brandt, FP 10, , suitably for milling edge materials with max.
R2 at beating up hurrying
AD-ID: A200404
More Infos click here
___________________________________________________________________________________
Edge milling cutter with cutting mechanism, Brandt, F10/EK11, , workpiece thickness 12
- 60 mm workpiece width approx.. 30 mm of edge thickness 1 mm
AD-ID: A200405
More Infos click here
___________________________________________________________________________________
Abrundzapfenschneider, BACCI, TSD-CSF, Tenon thickness max mm 25; Tenon depth max mm 40; Total connection kW 8,4; Weight kg 2.650; Mobile spindle Yes; Infeed from magazine Yes; Process Double sided; Required space lxwxh 3200x1650x1800; Availablity Short-term, ex location customer!; In offer since 27-03-07; Condition Unchecked; ,
AD-ID: A324799
More Infos click here
___________________________________________________________________________________
Sliding table for table milling, , , , disk size: L = 275
mm; B = 290 mm; H = 65 mm of sliding length: 0 to max. 650 mm of bed
length: 900 mm bed width: 150 mm
AD-ID: A288193
More Infos click here
___________________________________________________________________________________
Table milling cutter, Schneider, , , table size: 900 x 1060 mm of
wave diameters: 30 mm equipped with right/left run 2 pole-changing
speeds of achievement: 2,5/3.9 KW of V-belt pulley 3 stages notice
with micro-adjustment revises and with new ball bearings equipped.
AD-ID: A288194
More Infos click here
___________________________________________________________________________________
Lift link milling cutter, SCHNEIDER, SK 2/6, , 6 numbers of revolutions table extension extendable workpiece edition of 2 tool kits one above the other applicable tool high-speed adjustment
AD-ID: A303924
More Infos click here
___________________________________________________________________________________
Schwenkspindelfräse , OKOMA, SFM 3, , Schwenkspindelfräse SFM Type 3, Built in 1985, machine-No. 85516, with HolzHer 4 rollers feed-type 1112,, right-left run, with Removable piece edition, Engine: 6.5 / 8.5 kW, speeds: 3000/4000/6000/9000 rpm.,
AD-ID: A452389
More Infos click here
___________________________________________________________________________________
Spindle moulder, KARRI, TE 50G, Table length mm 1.100; Number of feeder rollers 3; Rotation speed steps 5; Spindle adjustment Manually; Roller table Front; Spindle Non-tiltable; Fine-adjustment of the fence Fine adjustment screw; Availablity from ca. week 18; In offer since 26-11-07; Condition Unchecked; ,
AD-ID: A390673
More Infos click here
___________________________________________________________________________________
Closed Halving Joint cutter / Frezarka do polaczen, Stegherr, KSF-Mini, stock-no. 5210
Closed Halving Joint cutter Stegherr
type: KSF-Mini
year of manufacture: 1985
input power 2,2 kW
rotation per minute of upper cutter 14000 rotation per minute of saw 2850 connection for air 6 bar
max. width of workpiece 64 mm
max. depth of workpiece 80 mm
time need for each routing 15 Sek.
fence with two operating cams
good condition
weight: 300 kg
price on demand
******************
Pozycja -Nr. 5210
Frezarka do polaczen krzyzowych (szprosow) Stegherr
Typ KSF-Mini
Rok 1985
Moc przylaczeniowa 2,2 kW
Obrotowosc gornego wrzeciona frezarskiego 14 000 obr/min
Obrotowosc pily 2850 obr/min
6 bar
max.szerokosc elementu 64 mm
max wysokosc elementu 80 mm
1 takt - ok 15 sek
ogranicznik z 2 bolcami ogranmiczajacymi
bardzo dobry stan
ciezar 300 kg,
AD-ID: A422912
More Infos click here
___________________________________________________________________________________
Frezarka lancuszkowa, Haffner, SL 100, Pozycja -Nr. 5266
Frezarka lancuszkowa Haffner typ SL 100
z agregatem do wiercen poziomych pod zamek
silnik 0,5 kW
,
AD-ID: A435867
More Infos click here
___________________________________________________________________________________
milling machine with tilting spindel, SCM, T 150 e LL-Digital, built in 2007,CE Sign, 4 axis control in the controldesk and LED Digital Displays, 2 suction nozzles, ironcast tables with longer version, and framedesk (moves out) clockwise/counterclockwise rotation, engine 7.5 KW, spindle changeable, new exhibition machine, ex-factory price approx. euro 23.000, - now for only… ,
AD-ID: A384859
More Infos click here
___________________________________________________________________________________
Tischfräse Kölle , Koelle, F50, , Kölle Tischfräse F50 speeds 3000,4500,6000,9000, rpm, right-left run, 4.8 - and 6 kw, 30 mm spindle, very good condition
AD-ID: A446982
More Infos click here
___________________________________________________________________________________
Table milling cutter , Hemag, Fraesrotor, , 7 milling spindles spindle diameters: 30 mm of milling spindle hoehenverstellbar
AD-ID: A440312
More Infos click here
___________________________________________________________________________________
SWIVELING SPINDLE MILLING CUTTER, SCM, T 150, , 5.5 kW Rechts-/Linkslauf engine speeds: 3000-4500-6000-7000-10000 rpm.
AD-ID: A315402
More Infos click here
___________________________________________________________________________________
Shaped part radius milling cutter , Brandt, F 10/100/EK11, , Simultaneous Bündigfräsen radius and up and down for straight edges and indoor and outdoor radii. Fräsmotoren groping and stored separately feinjustierbar. Pneumatic Spreizeinrichtung for inserting in the form of parts. Heads with knives 6!! HM-WPL-tipped knives R3. 3mm thickness to edges. Incl. Freqünzumformer with engine brake. Abblasdüse for ribs. Kappeinrichtung to genaün endcaps edges About stands, saw blade with e [...Technical data truncated]
AD-ID: A419339
More Infos click here
___________________________________________________________________________________
Copy milling machine, Helma, CFS MKS3-88, , per page 3 x milling and 2 X loops
automatic ones filling and destacking engines: 2 x 7.5 KW, 4 x 5.5 KW,
4 x 1.5 KW at least length 350 mm of max. Length 2000 mm broad of 20
to 360 mm height up to 170 mm feed motion 2-12 m/min
AD-ID: A178100
More Infos click here
___________________________________________________________________________________
Spindle router/Frezarka dolnowrzecionowa, Martin, T 21 A, stock-no. 5118
Spindle router Martin
type: T 21 A
table size 1000 x 900 mm
spindle diameter 30 mm
spindle brake by foot switch
right-left-run
spindle turning speed stepless adjustable 0 – 10000 rpm
motor 5 kW
with 3-roll-infeed Holz-Her
weight: 700 kg
price on demand
******************
Pozycja -Nr. 5118
Frezarka dolnowrzecionowa Martin Typ T 21 A
stol 1000 x 900 mm srednica wrzeciona 30 mm
hamulec nozny
bieg prawo-lewo
oboroty bezstopniowo regulowane od 0 – 10000 obr/min silnik ok 5 kW z 3-rolkowym posuwem Holz-Her
,
AD-ID: A397543
More Infos click here
___________________________________________________________________________________
Swiveling spindle milling cutter cutter , Schneider, Model SK 1/2, , Basic Solid Tischfräse (swing spindle) table Mass. 103 x 80 cm 30mm thorn attack left and right fine-tuning right / left engine running 6.5 / 7.5 kw 5000/10000 4000/8000 3000/6000 U min
AD-ID: A415373
More Infos click here
___________________________________________________________________________________
Profile milling automat , Weinig, Unimat 22E, , for liquidation arrives a whole
furniture factory! To 28.2.2008 inspection of 8.00h-10.00h starting
from 10.00h auction. At the channel route 14, 5745 Safenwil.
AD-ID: A397960
More Infos click here
___________________________________________________________________________________
HelmaCF40, Helma , Type CF 40, , machine fur chair industry Helma CF 40
tischabmesseungen 700x1120 mm frashohe 100mm max
AD-ID: A434312
More Infos click here
___________________________________________________________________________________
Kettenstemmer , Festo, PP, , engine: 2.2 KW of 2800 U/min. with pneumatics
pressure with something accessories
AD-ID: A358449
More Infos click here
___________________________________________________________________________________
Umleimerbuendigfraesmaschine , Holz-Her, UF 362 (19208), , uses make wood ago type UF 362
machine NR. 3284 engine 2.2 KW of role edition with wood ago feed
apparatus suction connection 2 x 80 mm stock location 97447
Gerolzhofen all data without guarantee!
AD-ID: A389145
More Infos click here
___________________________________________________________________________________
Schwenkspindelfräse , Martin, T23, , Ident-No.: V96340 engine power: 4.8 kW connection: 16 A / 380 V milling spindle heights and Tiefenverstellbar by hand spindle: 30 mm right-left run 4 - switchable speeds: U 3000/4500/6000/9000 / min swivel: -5 to 45 automatic engine brake attack both jaws with fine tuning space B / T / H: approximately 1,050 / 1,100 / 1,550 mm 3 - roles feed Festo
AD-ID: A448335
More Infos click here
___________________________________________________________________________________
Tischfraesmaschine , Kitty, 629, , Kitty milling machine table 629, 400V, 1.5 KW (2PS), milling spindle 30mm, Useful of 90mm, swivel milling spindle 90 -30, max. Tool diameter 180mm, speeds: 4800/6400 and 8700U/min., 710x575mm machine table, table 850mm height, weight 120kg, 100mm inlet SPECIAL please inquire!
AD-ID: A403100
More Infos click here
___________________________________________________________________________________
Sugar man copy milling , Zuckermann , , , uses 1500 mm of work length 3 copy milling
for each page 4 KW 1 sharpening aggregate approx. 4 KW of template
length 1500 mm pure treatment 1400 mm on each page of 4 engines
AD-ID: A435008
More Infos click here
___________________________________________________________________________________
Kettenfraese, Rapid, , , mobile with div. Chains
AD-ID: A308603
More Infos click here
___________________________________________________________________________________
more kettenstemmer , Feser, KFL50, , various accessories, like lifting chains
are to be seen from the photos. Machine is in a very good condition.
AD-ID: A406244
More Infos click here
___________________________________________________________________________________
Door lock chain milling cutter , Hafner, SL100, , with Stulp and pushers drilling unit operating task
AD-ID: A436170
More Infos click here
___________________________________________________________________________________
Kettenfraese, Rapid, Standgeraet, , technical data: - Achievement 1.5 KW - sword 12-17x50x175 - chains 16 mm - table size 500x260 mm - total mass H/L/B: 1700/600/600 mm - with chassis - uses
AD-ID: A227518
More Infos click here
___________________________________________________________________________________
Lamellenduebelfraese , ELU, , , Lamelllendübel and Schattenfugenfräse ELU DS 140, with suitcases, 220V, 600W, 7500U/min used, as Fig
AD-ID: A391774
More Infos click here
___________________________________________________________________________________
FIELDS F7 milling machine , Felder, F7, , FIELDS F7 milling machine
year of construction 1996 profile milling notice with double
micro-adjustment milling cutter for tiltable 90,-45 tap and
schlitztisch spindle tiltable to the rear engine performance: 4.0 HP
(3.0 KW) milling spindle: 30 mm of milling cutter U/min:
3700/6500/7800 milling table opening: 230 mm weight approx.. 480 kg
AD-ID: A412222
More Infos click here
___________________________________________________________________________________
spindle moulder, Baeuerle, SF M (18053), used
manufactured by Bäuerle
type SF M
built in 1965
mach.-No. 3264
motor 4/5,5 PS
foot brake
motor 2 speeds/motor pole switch
revs
2.8 / 4.5 / 5.6 / 6.0 / 9 / 12000 rpm.
right hand-left hand rotation
table size 1100 x 900 mm
spindle diameter 30 mm
cutter fence with fine adjustment
exhaust connection 120 mm
required space ca. 1100 x 900 mm
weight ca. 1000 kg
located in 97447 Gerolzhofen
No responsibility is taken for the correctness of this information!
,
AD-ID: A317797
More Infos click here
___________________________________________________________________________________
Swiveling milling machine , MAKA, SF 4510, , table dimensions 1050x760 engine strength 4 KW, milling thorn MK5, milling stroke 170 mm, angle adjustment 5+45, number of revolutions 1/Min., 3200-4200-6000-8000, table storing Inge D=115-170-220-270-345 mm, suction nozzle above and down
AD-ID: A329129
More Infos click here
___________________________________________________________________________________
Tenoning machine, SICAR, , Spindles vertical 1; Stop pivoting for ° 45; Trimming saws 1; 2 cutter heads Yes; Availablity ab ca. KW 21; In offer since 23-03-07; Condition Unchecked; ,
AD-ID: A324209
More Infos click here
___________________________________________________________________________________
Kopier-oberfraese, STATIONARY, HESS, , , Engine 1.1 KW max. Speed of 23,800 rpm.
AD-ID: A198834
More Infos click here
___________________________________________________________________________________
Spindle moulder, MALAWER, UTIS, Table length mm: 1.200; Spindle length mm: 220; Support for frames: Yes; Spindle adjustment: Manually; Spindle: Non-tiltable; ,
AD-ID: A432335
More Infos click here
___________________________________________________________________________________
round arch cutter, KUPER, BFG, • with mounted hand high speed router
• 220 volt, 1800 watt
• radius rule 3000 mm
• für radius up 300 to 3000 mm,
AD-ID: A387012
More Infos click here
___________________________________________________________________________________
Swiveling milling cutter , HOLZKRAFT, T 40 N, , Motor 3kW / 400V Spindelschwenkung 90 to +45 n = 1400/3500/6000/8000 rpm direction switch max. Tool Dia. 180mm spindle-effective 135mm Vacuum D = 120mm Weight 200kg
AD-ID: A436169
More Infos click here
___________________________________________________________________________________
Frezarka lancuszkowa / Fraiseuse à chaîne, Haffner, KF 20, Pozycja nr 5329
Frezarka lancuszkowa Haffner
Typ KF 20
silnik 1,74 kW
dlugosc miecza 200 mm
glebokosc dlutowania 150 mm
ciezar 250 kg
****************
N° de stock: 5329
Fraiseuse à chaîne Haffner
Type: KF 20
Moteur 1,74 kW
Longueur de lame 200 mm
Profondeur de mortaiser 150 mm
Poids: 250 kg,
Prix sur demande,
AD-ID: A452662
More Infos click here
___________________________________________________________________________________
Fraesautomat, Hempel, FQB, , milling diameters: up to 400 mm of
clamping strength: up to 60 mm of milling spindles: Diameter 20 or 30
mm power required: approx.. 18 HP of engine performance: 2 x 7.5 HP
AD-ID: A298922
More Infos click here
___________________________________________________________________________________
Chain router, Wigo, , stock-no. 4266
Chain router Wigo
sword length 200 mm
chain width 18 mm
with router chains
weight: 400 kg
price on demand
********************
Pozycja Nr 4266
Dlutarka lancuszkowa WIGO
glebokosc dlutowania 200 mm
szerokosc lancuszka 18 mm
z dlutem lancuszkowym (lancuszek frezarski)
ciezar: 400 kg
********************
Fraiseuse à chaîne Wigo
Profondeur de mortaiser 200 mm,
Largeur de chaîne 18 mm,
Avec chaînes,
Poids: 400 kg,
AD-ID: A292614
More Infos click here
___________________________________________________________________________________
Kopieroberfraese , SCM, R 8, , m. pneumatic stroke number of revolutions 10000/20000 rpm. Table size 90 x 77 cm stand discharge 75 cm weight 550 kg
AD-ID: A358807
More Infos click here
___________________________________________________________________________________
Tischfraesmaschine with integrated circular saw , Aldinger, KB-FM, , HR-REF-2115 Kind of machine: Tischfraesmaschine with integrated circular saw manufacturer: Aldinger type: KB-FM year of construction: 1965 weight approx.: 600 kg of measures approx.: L (mm): 1,200 B (mm): 1,200 H (mm): 1.450 technical data: - Engine performance 3 KW - table measures of 1,200 x 550 mm - spindle diameter 30 mm - table tiltable - work-hears 850 mm - right - and left hand motion accessories: - 3 - Roles - feed motion wood ago ET condition: very well price: 2.100, - euros net location: North-Rhine/Westphalia availability off: immediately shipping equipment locally: available The trading firm Ravensberg is a machine broker. They buy machines directly with us of the owner. For buyers no commissions develop. When desired we organize machine transport. Mistakes in the offer remain reserving.
AD-ID: A438691
More Infos click here
___________________________________________________________________________________
linear copy shaper and sander, throughfeed, HELMA / AMD, KFS 103 OD, Double sided mutiple linear copy shaper and sander
Automatic throughfeed with template and return to the operator
Workpieces are held on the templates by vacuum (Rietschle pump)
Max. workpiece sizes: 2200 x 350 mm.
Max. milling height: 160 mm
Equipment:
1+1 Shaper 11 kW, 2850 r/min
1+1 Shaper 11 kW, 2850 r/min
1+1 Shaper 9,2 kW, 2850 r/min
1+1 Shaper 9,2 kW, 2850 r/min
1+1 Belt sanding unit 1,5 kW, 1450 r/min
1+1 Belt sanding unit 1,5 kW, 1450 r/min
Spindle diameter: 40 mm,
AD-ID: A452382
More Infos click here
___________________________________________________________________________________
Spline milling cutter , HOFFMANN, WL- PU 2, , Spline milling cutter HOFFMANN WL PU 2 very good condition, nearly newly very sturdily and long-lived comes from a small carpenter's workshop and only few uses pneumatic freestanding device accurate cyclic testing and perfect Fraesbild precise Saeulenfuehrung and torsionally stiff Fraestisch with Tiefenanschlag thereby to be able permanent connections whether blunt or on fermentation by a dove tail connection (keyway) is manufactured with description functioned perfectly the employment effected e.g. at Tuerbekleidungen, Bilderrahmen, glass borders, hand rails or disk constructions this equipment should not be missing in no carpenter's workshop with central attack (reciprocal 45) with 2 attacks on the left and on the right 90 with some links w of 2 with drill for w 2 links professional equipment, a cheap scrap iron thereby can be worked immediately can with the quantities w 1, w 2, w 3 and w 4 be used to workpiece height to 120mm with pneumatic production part tension and pneumatic Maschinenfuehrung, the milling aggregate scolded automatically with manipulation of the foot pedal on, thus to have you when working both hands freely and can work fast and effectively (all functions to become with the foot switch switched on and off) with emergency switch table size, Deep 400mm broad 600mm with suction nozzle 80mm the angle stops on the left and on the right permits a milling depth 0 100mm (can be adjusted steplessly) to workpiece width of maximally 200mm the equipment by us is personally Germany far delivered and demonstrated, thus to have you with the purchase a risk very exact immersing cannot be stopped very exactly and easily by polished guide rods possible 220 V, 450 W 27000 rpm and tested with dealer calculation dispatch can be visited only in Germany 50.00 euros please to see you itself also my other articles on
AD-ID: A429480
More Infos click here
___________________________________________________________________________________
SWIVELING SPINDLE MILLING CUTTER , BAEUERLE, SF 200, , Bäürle Schwenkspindelfräse (LG 12705) Type SF 200 retractable table edition Aigner attack Aigner table widening left / right 3-reel feed Wegoma engine power 5 / 6 kW speeds: 3000-6000-4500-9000-12000 rpm. Spindle diameter 30 mm
AD-ID: A392169
More Infos click here
___________________________________________________________________________________
Spindle moulder, SCM, T 150, - spindle tiltable
- with workpiece feeder
- excl. dismantling and loading
,
AD-ID: A432574
More Infos click here
___________________________________________________________________________________
Lehbrink, Lehbrink, Lehbrink Gehrungsfraesmaschine Typ WL 38, , year of construction 1991 with CNC steered workpiece
transportation description of function:
------------------------------------ Of an operator a workpiece on a
roller race - arranged left of the basic machine body - put down under
equal early setting on a notice ruler. After preset programme now the
fully automatic work routine takes place, as soon as the starting
function is released by the operating person. Over rack of led
workpiece rear edge notice drives now - supervised by a sensing device
- to the rear edge of the workpiece on and couples themselves over the
vacuum Auger to the workpiece and promotes this to the 1. Cut
position. After reaching the given cut position the workpiece is
aligned again at the ruler, released pneumatically strained and the
work routine - Besaeum or mitre cut, with or without foil gluing on,
with or without scratching -. After work routine and release of the work of piece by the stretching
and orientation elements the workpiece is promoted on 2nd given cut
average, whereby sometimes this workpiece of the 2. Greifeinheit on
the right side of the machine to be taken over can, if the massbereich
and/or. the sectional view of this permits. 2. Grab system drives then
far-cut positions on up to the appropriate final cut or last mitre
cut. After treatment the workpiece of this 2 becomes. Grab system
promoted to a withdrawal position, where it can be taken manually. The
wl 38 can be switched also in such a way that it is fed by an operator
with a workpiece and this is supplied to the operator after effected
mitre cuts again for destacking. Technical data:
---------------------------- Workpiece completion length min. 550 mm
of workpiece completion length max. 3,000 mm workpiece width min. 100 mm workpiece width max. 1200 mm of
workpiece strength min. 10 mm of workpiece strength max. 22 mm of
achievement of the plant: A. with normal, angular Boxenfertgung 1 part
of edition approx.. 1 Box/1 minute of b. With 8-eckigen boxes - cut
depth ever approx.. 1000 mmm approx.. 1 box 2 minutes of C working on
for each clock max. 3 parts of grundmaschine consisting of: A. Basic
machine body (massif steel bed) equipped with workpiece supporting
table and tiltable mitre cut against situation as well as upper cross
beam framework einschcl. Fuehrunsgsystem for the admission of working
on supports b. Manually angleadjustable sawing support
winkelverstellung for each engine 22.5 - 60 equipped with: 2
three-phase alternating current engines, for each engine 4.2 KW with n
= 6000 U/min., excluding tools C. Tightener f. pneumatic stretching of
the workpieces during the milling procedure, D. 1 links and 1 right
workpiece transport equipment (conveyor) laid out according to that
max. Workpiece lengthens, equipped with appropriate stretching and
orientation elements for electronic starting of the respective
Gehrunsgschnittpositionen e. Pneumatics control f. 4 axles CNC control
in the basic execution of the plant are steered the following axles
CNC: 1. Gehrunsgschnittlaenge of the Saegesupportes 2. Mitre depth of
the Saegesupportes 3. Start the cut positions of the edition conveyor
4. Start the cut positions before the acceptance conveyor g.
Electrical switchgear cabinet 12.WL 38 extension edition - and
acceptance of conveyor around 500 mm each so larger workpiece length
the en to be arbeiitet can become standard workpiece length = 2500 mm)
of 13.WL38 1 special working on support equipped with 2 three-phase
alternating current engines 4.2 KW each n = 6000 U/min, both engines
laid out in tiltable execution and is not independently manually
hoehenverstellbar. For the sawing slot technology an engine is equipped with a sawing
package and the other engine receives to a special Nuter for this
zusatzaggregat the CNC control on 5 axles extended by also the depth
feed of the complete unit over the CNC to steer excluding tool 18.wL
39 1 automatic foil gluing on device, working under employment
tungsten carbide of a Saeegblattes to begin when milling melamin resin
or laminated plates 20.WL38 frequency changer 50/100 cycles per
second, enclosure IP 54 incl. automatic star triangle approach 30 KVA
21.WL38 high-speed brake mechanism of the engines of the
Saegesupportes rapid stop of the engines of the
Spezialbearbeitungssupportes operating voltage: 380 V, 50 cycles per
second total connected load approx.. 20 KW of compressed air 6 bar
total weight: approx.. 4800 kg space requirement: 7000 x 2500 x 1700
mm
AD-ID: A308567
More Infos click here
___________________________________________________________________________________
Edge milling off machine , Polymac, , , Polymac edge milling machine, Bj. 2 aggregates, and please 2mm radius milling, 12000 rpm chamfers 90's, 200V, 1PS for each aggregate., table size of 1000 x 650mm SPECIAL PRICE inquires
AD-ID: A327391
More Infos click here
___________________________________________________________________________________
Round elbow milling equipment , Kuper, (19134), , uses round elbow milling
equipment make Kuper inclusive hand router make Scheer TC 16
verlaengerungsschienen and plentifully accessories stock location
97447 Gerolzhofen all data without guarantee!
AD-ID: A384396
More Infos click here
___________________________________________________________________________________
Kopieroberfräse , C.M.S., AP-BIAX, , Längsschlittenhub: 650 mm, Qürschlittenhub 450 mm, Senkrechthub the work of adjustable heads - to: 30 - 80 mm, Arbeitstischaussmass: 2000 x 550 mm, speed of processing contour 100 - 3000 mm / min, axis milling distance of 180 - 550 mm, Freqünzumformer 20KVA, net weight: 2520 kg Built in 1981 Price: 130,000 DM
AD-ID: A447843
More Infos click here
___________________________________________________________________________________
Koelle combined table circular saw milling cutter very old , Koelle, , , the milling cutter is, estimates I times, at least 50 years old. It was located about 2 years in a barn and has from there something rust abbekommen, before it was stainless it. It has today so well it went, particularly on the table and at mobile parts derusted. The accessories that on the pallet lies participates. The engine has 1,5kW. It must be fetched. An elevating truck platform knows I will make available however to that are not probably at all enough around the machine on a trailer or the like to load. Pictures on request by email!
AD-ID: A440942
More Infos click here
___________________________________________________________________________________
Table milling cutter, SAC, TS 120, , Table size 110 x 70 cm numbers of revolutions 2,8, 4, 5,5 and 8000 rpm. Engine performance 5.5 KW AIGNER integral attack
AD-ID: A303942
More Infos click here
___________________________________________________________________________________
Copying router, Wigo, 1075, working length with straight end sides 1300 mm
with rounded end sides 1000 mm
working width max. 190 mm
working height max. 100 mm
infeed speed of the table stepless adjustable 0,5 – 12 m/min.
back ran speed of the table approx. 25 m/min.
2 routermotors each 4 kW, 7500 rpm
tool diameter 120 mm, shaft diameter 30 mm
2 pneumatic clamping cylinder
air consumption approx. 1500 l/h
weight: 850 kg ,
AD-ID: A401039
More Infos click here
___________________________________________________________________________________
Chain router Schneider with boring unit, Schneider, KFS, stock-no. 4833
Chain router Schneider with boring unit
type: KFS
year of manufacture: 1999
heavy chain router with boring unit
for front side slotting and slotting from the side for steel and metal connections in wooden beams with safety handle switch, gear brake, stand in solid metal construction and spindle legs, roller track 2000 mm long with fence ruler,
pneumatic beam clamping facility.
tilting range 0 – 90° stepless
motor power 2,5 kW, 380 V, 50 Hz
routing depth 400 mm with guidance at the front
height adjustment range 0 – 500 mm
mobile to the sides
Additional unit as boring machine with a lift of approx. 400 mm, boring feed automat. by switch ventile, the complete unit is height adjustable for drilling into the front or side of the workpiece, 3 kW motor, fast clamping tool chuck, 0 – 16 mm and a slideable boring template
weight: 1000 kg
price on demand,
AD-ID: A320521
More Infos click here
___________________________________________________________________________________
Copy milling machine for plastic window production, ROTOX, KF 257, Number of aggregates 1; Spindles vertical 1; Compression bar 6; Copying from stop to stop Yes; Vorschub Manually; Availablity ab D-66887 St. Julian; In offer since 13-07-07; Condition Unchecked; ,
AD-ID: A352471
More Infos click here
___________________________________________________________________________________
Schwingmeisel, MAKA, RDB-5, , Schwingmeisel: G & 1455-M2406
AD-ID: A250613
More Infos click here
___________________________________________________________________________________
Milling rotor R 191, Hemag, , , ruestzeitlose full-programmable milling machine after the stop gun system 7 rotor spindles 40 mm-D, and/or 30 mm-D for 2 tool kits 2 Hoehenanschlaege per spindle milling attack with parallel movement of 16 gun attacks for milling depths splinter decrease 0 6 mm Three-phase motor 11 KW, 380 V, 50 h spindle number of revolutions 6000-8000-10000 n spindle effective length 180 mm of tool diameters max. 189 mm option: 1 excerpt table widening extendable and removable 1 handwheel - Hoehenfeineinstellung 1 revolution = 2 mm of Hoehenausgleich 1 set of calibers for variable Einstellhoehen 0.5 - 12 mm 1 feed apparatus including stand 3 Vorschubrollen fitted with springs 20 mm of 8 feed speeds with machine plug socket and security
AD-ID: A209162
More Infos click here
___________________________________________________________________________________
Table milling cutter , Panhans, 257, , tl ID. 2067158 table size 1000 x 650 mm of
vertical adjustment of the milling spindle 120 mm with handwheel
milling thorn 30 mm milling notice with micro-adjustment right/left
hand motion numbers of revolutions 3000/4500/6000/9000 U/min. Engine
380 V, 50 cycles per second of 5.5 KW of suction nozzles 120 mm of
Gegensteckdose length 1050 mm broad 900 mm height of 1300 mm weight
400 kg
AD-ID: A415104
More Infos click here
___________________________________________________________________________________
Router , Olbernhau, OFBT, , Year of construction: 1987 something accessories admission: MK 2
AD-ID: A383012
More Infos click here
___________________________________________________________________________________
Tenon cutting machine, HARBS, ZMS V6, - Tenon cutting machine from a carpenter's workshop
,
AD-ID: A445431
More Infos click here
___________________________________________________________________________________
Keilnutfraesmaschine , HOFFMANN, PU-2-65, , pneumatic groove milling machine standard
version, pneumatic with 2x450W engines and large table. To the
treatment of a workpiece with 2 splines per clock rate. Drill distance
of 65 mm, adjusted by the factory, (specifically adjustable to max.
100 mm) of inclusive. 2 Stk. Drill W 2 technical data: Connected load
electrically: 1ph/N/PE, 230V, 50 cycles per second, 0.9 KW connected
load pneumatically: 6 bar no-load operation number of revolutions:
27000 U/min. Control: pneum. Production part tension: pneum. Inserting
height max.: 140 mm of milling depth vertically: 115 mm of noise
generation: 75.3 railways (A) suction nozzle diameter: 100 mm swallow
size: W1/2/3 mass B/T/H mm: 800/750/1500 weight: 130 kg
AD-ID: A340910
More Infos click here
___________________________________________________________________________________
spindle moulder with tiltable spindle, HOLZKRAFT, T70i, HOLZKRAFT Schwenkspindel-Tischfräsmaschine
Typ Formula T70i - NEUMASCHINE-
VORFÜHRMASCHINE ZUM SONDERPREIS
+ serienmäßig mit Fast-Tischeinlage statt Tischringe
verstellbar über Kurbel auch bei montierten Werkzeugen
• stabile Stahl-Graugußkonstruktion
• dynamisch ausgewuchtetes Fräsaggregat
am Arbeitstisch verankert
• besonders robuste Bauweise der am stärksten
beanspruchten Maschinenteile
• ruhiger Lauf durch Präzisionsaggregate
und hohem Eigengewicht
• serienmäßig mit Rechts-Linkslauf mit
elektronischer Blockierung bei Wechsel
• Drehzahlanzeige an Bedienerfront
• serienmäßig mit MK 4 Wechselspindel-System
• Arbeitstische aus Grauguß, gehärtet und nachgeglüht
• für höchste Präzision und Langlebigkeit
• einfache Handhabung durch zusammengefaßte
• Bedienungselemente an der Maschinenvorderseite
• Fräsanschlag mit Feineinstellung serienmäßig
• leistungsstarke Industriemotoren (P2/S1)
Technische Daten:
• Abmessungen Arbeitstisch 1200 x 730 mm
• Frässpindel-Schwenkbereich + / - 45°
• Nutzlänge der Spindel(*bei Spindel-Ø 40-50 mm)
140 mm
• Frässpindelhub 90 mm
• max. Werkzeug-Ø Profilieren 250 mm
• max. Zapfenwerkzeug-Ø 350 mm
• max. Formfräswerkzeug-Ø 160 mm
• max. Werkzeug-Ø absenkbar 320 x 85 mm
• Drehzahlen 3000/4500/6000/8000/10000 U/min.
• Motorleistung 400 V / 50 Hz / P 2 5,5 kW
• Gewicht 490 kg
• Absaugstutzen-Ø Anschlag 1 x 120 mm
• Absaugstutzen-Ø unter dem Tisch 1 x 120 mm
,
AD-ID: A441588
More Infos click here
___________________________________________________________________________________
TABLE MILLING CUTTER, KOELLE, TYP F 50, , Kölle F50, engine 6 / 8 KW 3000-6000-4000-8000-5000-10000 rpm. Rechts-/Linkslauf spindle motor brake diameter 30 mm complete safety devices
AD-ID: A210882
More Infos click here
___________________________________________________________________________________
Window set of millers , STEHLE, Nr. 6013, , Turret plate window milling set STEALS No. 6013 very good condition, newly consisting of 8 double crease and Profilfraeskoepfen No. 60344, 61204, 60304, 60300, 60217, 61296, 60208, 61200 and 6 Schlitzfraeskoepfen 61116, 60129, 61108, 61100, 61104 and 61120 in addition you receive still 4 Fraeskoepfe of STEAL from No. 291, 290, 292 and 2107077 for the production of resolution rung frameworks the window set of millers are for 50's a spindle or an admission (with spacer for 40's a spindle, the drills can be used thereby also problem-free on 40's a spindle) the set of millers for rung frameworks are for 40's a spindle, have HSS cuts, the all OK ONES and sharpened are and a very large resharpening zone to have the tungsten carbide Turret plates for the window set of millers can you with STEAL still many years get the set of millers have the designation 6013, record number 2038616 Spannhoehe approx. 100mm the tungsten carbide turret plates have very high service lives, can by several sides be used and are very economical thereby for hand feed motion, with BG test the set of millers are approx. 10 - with specification and designs to the Fraeskoepfen the set of millers completely the Fraeskoepfe is 15 years old only few was used and is all in a very good condition the turret plates is OK ONES and sharply after my knowledge with all Fraeskoepfen you can be able immediately to work with the drill set you windows with double crease to manufacture, for euro groove IV68 and euro crease with the set of millers also windows without rain rail can be manufactured for the monument-protected range with some new measurers and other accessories still also in addition ex-factory price for all Fraeskoepfe were approx. 35000.00 DM for a material thickness of 68mm the set of millers is delivered by us personally Germany far, you to have thus with the purchase no risk please regards you also my other articles
AD-ID: A439269
More Infos click here
___________________________________________________________________________________
Tischfraesmaschine, , T 750, , Milling machine T 750, 220V, 2,8KW (3,9PS), table size 710x640mm, milling spindle 30mm, tiltable 10 to +30, useful height of 100mm, Tischoeffnung of 200mm, numbers of revolutions: 1800/3000/6000 and 9000 rpm price: 1550, -
AD-ID: A296163
More Infos click here
___________________________________________________________________________________
Router, Striffler, (11625), , uses, year of construction 1977, machine NR. 2755 for
plastic and aluminium profiles all data by reservation. Price from
stock 97447 Gerolzhofen.
AD-ID: A243868
More Infos click here
___________________________________________________________________________________
Edge routing and sanding automat for solid woo, IMA, Combima/K/I/630/R, stock-no. 5052
Edge routing and sanding automat IMA for solid wood
model: Combima/K/I/630/R
2 x profile routing controlled motors
edge router tiltable
2 x belt sanding oscillating each 1,75 kW
2 x edge sanding with belt tiltable for top and bottom each 0,4 kW
2 x edge sanding with belt tiltable for top and bottom each 0,4 kW
2 x profile sanding each 0,37 kW
1 x brush 0,37 kW
infeed speed 8 – 40 m/min.
weight: 5000 kg
price on demand,
AD-ID: A364153
More Infos click here
___________________________________________________________________________________
Table milling cutter , Scheppach, hf 3000, , Scheppach tischfraesmaschine 220V, 2.8
KW, 30's milling spindle, max tool tools 200mm, 3 numbers of
revolutions 3000/6000 and 9000 U/min. Slot sliding table 1000mm with
cutting to length notice, role pressure device and accessories,
special price
AD-ID: A347400
More Infos click here
___________________________________________________________________________________
Router with CNS control, SCM, , , router SCM with CNC control
AD-ID: A298935
More Infos click here
___________________________________________________________________________________
tenoner, Mafell, ZAF 200 Vario (19535), manufactured by Mafell
type ZAF 200 Vario
demonstration machine - NEW
built in 2008, mach. No. 875636
- milling machine tiltable up to 60°
- laser positioning
- special cutter
technical details:
max. wood dimension (W x H)
rectangular during tenoning 400 x 200 mm
max. wood dimension during
tenoning 60° tilted 200 x 200 mm
length of the rest (with by scales
adjustable rip fence) 3 m
motor, rotary current
- clamping 400 V
- frequency 50/60 Hz
cutting speed 37.4 m/s
with adjustable feed speed
weight ca. 380 kg
order No. 991 102
No responsibility is taken for the correctness of this information!
,
AD-ID: A430661
More Infos click here
___________________________________________________________________________________
zapfenschneid and schlitzgarnituren , , , , zapfenschneid diverse and schlitz garnituren used elsewhere diameter 40 mm
AD-ID: A438386
More Infos click here
___________________________________________________________________________________
Kettenstemmer/kettenfraese , Kapfer, Wandmontage, , HR-REF-1545 kind of machine: Kettenstemmer /Kettenfraese Manufacturer: Kapfer Type: Wall assembly Weight approx.: 150 kg Mass approx.: L (mm): 680 B (mm): 850 H (mm): 1.300 Technical data: - Heavy TLA tightness 200 mm - sword width 50 mm - lifting depth up to 200 mm over hand levers - lifting width 50 mm - doors - and bar clamping device Control: manually over hand levers and Raeder Accessories: Chain NSA TZE Condition: very well Price: 400, - euros net Location: Region North-Rhine/Westphalia shipping equipment locally: available dismantling, loading and transport are task of the Kaeufers. The trading firm Ravensberg organizes if necessary gladly the loading/transport of the commodity.
AD-ID: A335253
More Infos click here
___________________________________________________________________________________
Hollmann table router CFIS , Hollmann , CFIS, , engine power 3.7 Kw 17500 rpm table size 750 mm x 750 mm 1 converters 300 Hz
AD-ID: A398824
More Infos click here
___________________________________________________________________________________
Schwenspindelfraese , PANHANS, Typ 231, , Used Vorführmaschine: * milling spindle with pivoting, stands in modern steel, double-sided swing storage unit with 2 strong segment tours, * swivel the milling spindle -5 to +45, * table starkwandige, hochverrippte cast execution, solid Fräsdorn * 30 mm, * Einspannhöhe 125 mm, * with quick-cutter furniture, electrical * speed display, * machinery outlet, * belt quick setup, * absc [...Technical data truncated]
AD-ID: A421334
More Infos click here
___________________________________________________________________________________
Elbow milling notice , Panhans, Konturenfraesvorrichtung, , Konturenfräsvorrichtung to massgenaün milling curved pieces. Unlike start-rings can hereby by the fine-tuning any desired Frästiefe accomplish. With 4 guide rings. Can even as a guard when working with start-rings are used. Please note that the PDF file with our terms and order form.
AD-ID: A386922
More Infos click here
___________________________________________________________________________________
TABLE MILLING CUTTER , SCHROEDER, , , 3.7 kW engine power
AD-ID: A360915
More Infos click here
___________________________________________________________________________________
Table milling cutter , Baeuerle, , , Table milling cutter manufacturer Baeuerle 6 numbers of revolutions (2800-12000 rpm), right + on the left of run, spindle 30mm, large table, attack with reciprocal micro-adjustment, spindle brake, complete with cable and plug, without feed motion
AD-ID: A441113
More Infos click here
___________________________________________________________________________________
chain mortiser, Haffner, KF 412 (19422), used
top condition
manufactured by Haffner
type KF 412
built in 1994
mach. No. 108
wall machine
mechanical workpiece clamping
required space ca. l x w x h
500 x 650 x 1,100 mm
located in 97447 Gerolzhofen
No responsibility is taken for the correctness of this information!,
AD-ID: A419762
More Infos click here
___________________________________________________________________________________
Table milling cutter, KOELLE, F 50, , Table size 120 x 80 cm numbers of revolutions 3, 4, 5, 6, 8 and 10,000 rpm. with integral attack AIGNER engine performance 6.5/8 HP weight 700 kg
AD-ID: A303937
More Infos click here
___________________________________________________________________________________
Frezarka dolnowrzecionowa, Martin, T 24, Pozycja nr 5321
Frezarka dolnowrzecionowa Martin
Typ: T 24
Srednica wrzeciona 30 mm Wysokosc wrzeciona 145mm Hamowanie wrzeciona z obu ston przez wylacznik nozny
Wymiary stolu 2400 x 930 mm
Länge der ausziehbaren Werkstück-Auflage 3000mm Ausziehbar bis zu 800mm
4 predkosci 3000 / 4500 / 6000 / 9000 obr/min silnik 7,5 kW pneumatycznie ustawiana wysokosc wrzeciona
zapotrzebowanie powietrza 6 bar z posuwem 4-rolkowym Haffner 908
bieg prawo/lewo 2 predkosci ciezar 750 kg,
AD-ID: A446363
More Infos click here
___________________________________________________________________________________
Table milling cutter with FESTO feed motion , Baeuerle, SFM, , HR-REF-1506 kind of machine: Table milling cutter with FESTO feed motion Manufacturer: Baeuerle Type: SFM Weight approx.: 1,000 kg Mass approx.: L (mm): 900 B (mm): 1,000 H (mm): 850 Technical data: Table mass 900 x 1,000 mm - Spindle diameter 30 mm - Milling attack with micro-adjustment - 2 number of revolutions stages - On the right of/left hand motion - Table hoehenverstellbar - Foot brake Feed device: FESTO feed motion Go 61 - 3 roles - 8 speeds - arms approx. 700 mm long Condition: immediately operationally Machine was so far used in the plastic range Price: 1.500, - euros net Location: Region Lower Saxony Shipping equipment locally: available Dismantling, loading and transport are task of the Kaeufers. The trading firm Ravensberg organizes if necessary gladly the loading/transport of the commodity.
AD-ID: A329636
More Infos click here
___________________________________________________________________________________
Router with CNC control, Frommia, , , router with CNC control
AD-ID: A298938
More Infos click here
___________________________________________________________________________________
Tischlfraese , PANHANS, Typ 256, , stares to table milling cutter
AD-ID: A382449
More Infos click here
___________________________________________________________________________________
Formteifräse , Lange, B60, , Formteilkantenfräse for PVC - edge to 3 mm.
AD-ID: A452066
More Infos click here
___________________________________________________________________________________
Peg and round bar milling machine , Fabr.: Loeser, Typ: RF 412, , Production of smooth round bars production of spiralgerillten peg staffs Further details on request
AD-ID: A357655
More Infos click here
___________________________________________________________________________________
Router/table milling cutter , , , , HR-REF-1723 Maschinenart: router / Tischfräse mass approximately: L (mm): 760 B (mm): 1,050 H (mm): 1,500 Specifications: Table mass 700 x 760 mm Engine Power 2 , 2 kW Frässpindeldrehzahl 17,500 rpm. Entering angle 0 -30 - 50 Fusspedalsteürung very robust and solid state machine: very well-kept machine Price: 1,000 - Net Location: Lower Saxony Verladegerät spot: with mining, Verl [...Technical data truncated]
AD-ID: A350149
More Infos click here
___________________________________________________________________________________
Rigid milling cutter, Klein & Soehne, , , , year of construction approx. 1960, with rolltisch, with wood ago 3-Rollen-Vorschub type ETZ
AD-ID: A215950
More Infos click here
___________________________________________________________________________________
Lehbrink mitre milling cutter type wl 35 special, , , , for cutting
Kopusen and longitudinal mitres technical data:
--------------------------- Werkstueckabmesungen: Workpiece completion
length for korpusse max. 3100 mm of workpiece completion length for
longitudinal mitres max. 610 mm (over the entire width of 610 mm
mitres can be milled). Workpiece completion length for longitudinal
mitres min. 250 mm of pass band (schnittlaenge) max. 2600 mm of
workpiece strength for longitudinal mitres max. 26 mm of workpiece
strength for transverse mitres max. 45 mm of workpiece strength min.
10 mm of machine specification: ----------------------------------- A)
Basic machine body (massif steel bed) b) guidance bridge with roller
aprons for the admission of working on aggregates. , pneumatically
in-/-suspending to C) of 2 manually angleadjustable sawing supports
(30 - 90), in each case equipped with 2 three-phase motors ever 5.2 KW
with n = 6. 000 U/min, with the final cut 1 additional tiefenanschlag each is
started, which is to 1 mm under work level. The two Saegedupporte are
in such a way laid out that the winkelverstellung between 30 and 90
can take place steplessly. In the positions 30, 45 60 and 90 an
indexation is planned. D) Stretching and orientation elements for
stretching the work of pieces during the milling procedure. e) 1
tiltable cut edition f) 1 automatic foil bonding fixture g) intake
side: 1,600 mm broad and 3500 mm long Roellchenbahn as well as 1
notice ruler installed over the whole length, provides with 3 manually
adjustable, mechanical notices. j) 1 V.24 interface for the connection
external PC k) 1 frequency changer 20 KVA l) 1 scratching mechanism,
integrates in the foil bonding fixture, working under employment of a
tungsten carbide AEG sheet, to begin when milling melamin resin or
polyester coated plates. Discharge side: ------------------ 1,900 mm broad and 3500 mm long
Roellchenbahn inclusively. electronically displaceable positioning
notice with max. 2 pneumatic greifeinheiten for the fully automatic
workpiece transport of the individual given mitre and sawing cuts. The
discharge side of the mitre milling machine is in such a way conceived
that the workpiece can be taken both on the discharge side and on the
intake side. This is specified exclusively by programming in the
numerical control program. For sawing longitudinal mitres with cabinet
doors 5 manually adjustable and by program callable notices are
installed. In and discharge roller race:
--------------------------------------- The in and discharge roller
race concerns Roellchenschienen with, which are each other arranged in
a certain raster secondary. 2 1-Achs-Prozessor-gefuehrte positioning
control for max. 32 programs, inclusively. Angular momentum controller, input and call of the data over dust
proof transparency keyboard and number announcement type "Leonard
& Farmer 7541". The integrated positioning control permits
the following sequences of functions: A) Position after entspr. Way
defaults, without treatment b) positioning at given positions with the
treatment "nur Kleben" C) Position with the treatment
"Besaeumen" (deeply cut through 1 mm) D) positioning with
the treatment "Gehrungsschneiden" e) Position with the
treatment "Ritzen, sticking and Gehrungsschneiden". The
treatment "Durchschneiden" and "Gehrungs
schneiden" is both with 1st and with that 2. Aggregate possible.
Further notes: --------------------------------- 1.) Operating
voltage: 380 V, 50 cycles per second of 2nd) lacquer finish: The plant
is primed and in the colour ral 6011 painted. 3.) suction power: The
necessary suction speed may do 30 m/sec. do not fall below. 4. ) accuracy/tolerance: The tolerance, which can be achieved between
mitre cut to mitre cut, is to 0.1 mm with +/-. 5.) reference: The
noise level of the machine lies over 85 dbA, accordingly is preventive
measures for the service personnel (protection of the ears etc..) to
introduce by others. 6.) possible necessary grilles on the back of the
plant are to be placed likewise by others.
AD-ID: A232665
More Infos click here
___________________________________________________________________________________
Spindle router/Frezarka dolnowrzecionowa, Martin, , stock-no. 5121
Spindle router Martin
table size 1050 x 830 mm
with router spindle 30 mm diameter and additional spindle 40 mm
right-left-run
motor 3 /4 kW
with 3-roll-infee Holz-Her
weight: 600 kg
price on demand
*****************
Pozycja-Nr. 5121
Frezarka dolnowrzecionowa Martin
stol 1050 x 830 mm
srednica wrzeciona 30 i 40 mm
silnik 3 /4 kW
bieg prawo lewo
z posuwem 3 rolkowym Holz-Her,
AD-ID: A402456
More Infos click here
___________________________________________________________________________________
automatic copy milling machine, Hempel, FP, , milling width: max. 100 mm of
milling length: max. 400 mm 2 pieces of milling engines: 12000 U/min.
Power required: approx.. 9 HP
AD-ID: A298945
More Infos click here
___________________________________________________________________________________
Table milling cutter , BÄUERLE, SFM, , Table milling cutter B�UERLE SFM optically and technically in a very good condition, the whole machine is very complex outdated functions everything with attack on the right of and left in the depth to be adjusted perfectly can and a micro-adjustment right with Keilriemenantrieb with spindle statement the splinters have been able to be very well exhausted with 30's spindle with right left hand motion the machine by us is personally Germany far delivered and demonstrated, thus to have it with the purchase no risk with brake, which is unfortunately defective (Fu�bedal) all camps and Fuehrungen are OK ONES, which are milling cutter in a very good condition with large Tischoeffnung by different rings be made smaller can (thus to be able also drills with a very large diameter to be used and They can mill also with small drills, the rings safe participate also) with 2800, 4500, 5600, 6000, 9000 and 10000 rpm spindle hearing adjustment effected via a handwheel with lock screw and is very finely and exactly the table consists of high-webbed grey cast iron with replaceable spindle very robust and long-lived execution of the deep attack has specially long cheeks, thus long workpieces cannot be led optimally table are 1100mm broad and 900mm deeply with the machine can be worked immediately 380V, 4500 and 5000W (by 2 speeds) professional equipment, a building market scrap iron optimal, simple, fast and safe handling can be visited and tested dispatch only in Germany for 100.00 euros please to see you itself also my other articles on
AD-ID: A439261
More Infos click here
___________________________________________________________________________________
double-sided copy milling machine, Helma, CF 40, , Particularly been suitable fuer chair industry. Also curved workpieces roughen to be formed. Technical data: Tischabmesseungen: 700 x 1120 mm in diameter working-spindles: 30 mm of number of revolutions: 10500 1/min max. Fraeshoehe: 100 mm max. distance zw. spindles: 450 mm
AD-ID: A225187
More Infos click here
___________________________________________________________________________________
Table milling cutter , SCM, T 160, , electrical skew left clockwise rotation
engine: 7.5 KW of inclusive. 3 roles hectar FF he feed motion 4
speeds: 2/4/5/6/9000 U/min.
AD-ID: A437045
More Infos click here
___________________________________________________________________________________
Routing machine, CMS, MANUMATIK, stock-no. 5057
Routing machine CMS
Model: MANUMATIK
year of manufacture: 1984
1 router 3,4 kW
1 router 1,9 kW
with converter 2950/15000 rpm, 5,7 kW, 8 KVA
working with model
with spare router motor and models
weight: 900 kg
price on demand,
AD-ID: A370065
More Infos click here
___________________________________________________________________________________
Paoloni TX 160 L/3 - achs/(+ 45/- 45) , Paoloni, TX 160 L , , TECHNICAL DATA - workbench dimensions 1200x780 mm - milling spindle useful height D.35/30 mm or 1 1/4" " 140 mm - Milling spindle useful height D.40/50 mm 180 mm - rotating speeds of the spindle with two cited camps 3000/4500/6000/8000/10000 rpm - max of dimensions under the workbench retractable tools 320x50 mm - engine strength 5,5kW 7,5PS 50Hz (S1 Achievement) - volumes after EN 27960 regulation 83.9-87.3 railways (A) - spindle inclination range from -45 to +45 BASIC EQUIPMENT - adjustable attack (max of tool diameters 250 mm) with: Announcement and handwheel to the total transfer of the attack announcement and handwheel for the transfer of the foot at the intake way swiveling possibility of the milling attack for the fast freeing of the table exhaust hood at the milling attack with connecting piece D.120 mm aluminum plates - exhaust hood in rear position at the machine rack with connecting piece D. 120 mm - Mechanical brake with pedal price increase - automatic spindle vertical adjustment with decimal impulse attitude - automatic spindle inclination with decimal impulse attitude - gravitation announcement of the spindle vertical adjustment - electrical announcement of the spindle inclination - adjustable section in the table for the better edition of the workpiece in relation to the tool diameter - large front door more fuer an easier speed change SPECIAL EQUIPMENT - Paoloni casting table widening on right and left milling table side (overall length approx. 2.40 m) - Paoloni taking off framework at Fraestisch over entire table width (inclusive. Widenings) - Paoloni 3 AXIS CONTROL of fuer spindle height, - turning and milling attack - Paoloni of control panels at eye level (tiltable) - Paoloni table opening adjustment EASY Year of construction: 2002/from 1st hand condition: technically 100% i.O with customs traces ex-factory price: approx. 16000, - zzgl. VAT.
AD-ID: A418609
More Infos click here
___________________________________________________________________________________
Tenon router / Frezarka obwiedniowa, Helma, , stock-no. 5027
Tenon router Helma
for round and oval tenons
2 pneumatic clamping units from top
table left/right variable 400 – 0 – 400mm
2 fences on the table left/right 0-45°
table height 0 – 200mm
weight: 400 kg
price on demand
*******************
Pozycja nr 5027
Frezarka obwiedniowa Helma
Do okraglych i podluznych czopow
Stol przejezdny prawo/lewo 400-0-400 mm
2 pneumatyczne dociskacze od gory
wsokosc stolou regulowana 0-200 mm
ciezar 400 kg,
AD-ID: A437721
More Infos click here
___________________________________________________________________________________
REICHENBACHER copy milling , REICHENBACHER, EG-225, , Rechenbacher copy milling,
Typ.EG-225, Bj.90, only 4797 operation hours, NP 78,000 DM, two
milling spindle. For production of chair parts, beating up hurrying
etc. for copying from parts to template. Feed motion and number of
revolutions of the workpiece stuffenls adjustable. Further information
and photos on request.
AD-ID: A436982
More Infos click here
___________________________________________________________________________________
spindle moulder, Baeuerle, SFM 0 (18636), used
manufactured by Bäuerle
type SFM 0
mach. No. 552
motor 1.7/2.6 kW
motor 2 revs/motor pole switch
right hand - left hand rotation
table size 700 x 900 mm
spindle diameter 30 mm
exhaust connection d. 120 mm
required space ca. l x w x h mm
1000 x 1000 x 1200
located in 97447 Gerolzhofen
No responsibility is taken for the correctness of this information!
,
AD-ID: A352402
More Infos click here
___________________________________________________________________________________
zweispindlige milling cutter with automatic feed motion, , , , equipped with: Dickte edge milling cutter
AD-ID: A237419
More Infos click here
___________________________________________________________________________________
Mill to fixture OFBT , C.W. Kreher Olbernhau, OFBT, , router OFBT * manufacturers: C.W. Kreher
Olbernhau * type: OFBT * year of construction: 1972 * mass: 0.6 t *
number of revolutions max.: 18000 /min * dimensions: BxHxT approx..
800 x 1100 x 1800 mm * achievement: 1.5 KW * operating voltage: 380
V/50 cycles per second * attached * good condition net price per piece
(starting from location): 1,450.00 EUR
AD-ID: A404235
More Infos click here
___________________________________________________________________________________
Slot hood, Panhans, 1641 (16144), , for the setting up on tischfraesmaschine, uses,
year of construction 2000, top condition all data without guarantee!
Price from stock 97447 Gerolzhofen.
AD-ID: A296551
More Infos click here
___________________________________________________________________________________
Swiveling spindle milling cutter , Baeuerle, SFM 200 (18631), , uses make Baeuerle type SFM
200 year of construction 1988 machine NR. 1059/88 gs-examined
strengthened engine 6/7.5 KW tiltable motor brake engine 2 number of
revolutions/pole-changing 6 number of revolutions stages:
3000-6000/4500-9000/6000-12000 right left run table size of 1100-900
spindle diameters 30 mm milling notice with micro-adjustment and total
adjustment over rack adjustment electrically height and turning with
handwheel micro-adjustment suction connection 2x120 mm space
requirement approx.. LxBxH mm of 1200 x 1100 x 1200 weight approx..
1000 kg stock location 97447 Gerolzhofen all data without guarantee!
AD-ID: A352393
More Infos click here
___________________________________________________________________________________
Run drilling, milling and sawing automat , Wigo, 1067, , Work length max.: 200 - 1500 mm work width max.: 100 mm work height max.: 60 mm of engine data: 62 A; 50 cycles per second; 380 V weight: approx. 3550 kg
AD-ID: A442335
More Infos click here
___________________________________________________________________________________
Concise milling cutter, HOLZ HER, UF 362, , Driving motor 2.2 KW of lower and upper Fuegefraeskopf
AD-ID: A318419
More Infos click here
___________________________________________________________________________________
To Kopieroberfraese, KAEMPF, NF 423, , See picture it is unfortunately present no manual
AD-ID: A318420
More Infos click here
___________________________________________________________________________________
Hand staff milling cutter , , HSF 10405 D, , for the concise milling of wood peg,
new, in the suit-case with spiralschlauch and stop system aluminum
anodizes, number of revolutions 22000 U/min., air connection max. 6,0
bar, air consumption approx.. 113 L/min., Werkzeugdurchmesser max. 20
mm, clamping device 6 mm.
AD-ID: A383743
More Infos click here
___________________________________________________________________________________
Feed apparatus, Roma, 110 DVPF (17053), , uses, make Roma, type 110 DVPF, machines. - NR. 0610/91852, 3 Vorschubrollen, 8 speeds, directly adjustably, with stand all data by reservation. Stock location 97447 Gerolzhofen
AD-ID: A296535
More Infos click here
___________________________________________________________________________________
Kettenfraese, Kofama, DFLB (17123), , uses make Kofama type DFLB year of construction
1984 machine NR. 2340 stand machine chain set 14 mm and 12 mm of door
edition workpiece edition milling aggregate swivelling lubricator
mechanical production part tension suction connection 60 mm space
requirement approx.. LxBxH 800 x 1000 x 1800 mm weight approx.. 400 kg
total connected load 1.5 KW stock location: 97447 Gerolzhofen
AD-ID: A260712
More Infos click here
___________________________________________________________________________________
Karusselfraese , Fabr.: Knoevenagel:, Typ: FSO-1850, , 1 milling aggregate with 7,5 KW with transformer
6500 -9000 u/min 1 sharpening aggregate
AD-ID: A414289
More Infos click here
___________________________________________________________________________________
Edge milling cutter/concise milling station , Lange, B 60, , HR-REF-1800
kind of machine: Edge milling cutter/concise milling station
manufacturer: Long type: B 60 year of construction: 2002 weight
approx.: 250 kg of mass approx.: L (mm): 800 B (mm): 1,000 H (mm):
1.500 technical data: - table size 700 x 1,000 mm - simultaneous upper
and lower concise milling - of 2 HF - milling engines with 0,4 KW - of
4 schneidige turret plate knifeheads - number of revolutions 4,000 -
18,000 U/min steplessly - workpiece thickness when radius milling
approx.. 16 - 55 mm - workpiece thickness when chamfer milling
approx.. 12 - 55 mm - workpiece width min.ca. 30 mm - Edge thickness
0.4 - 3.0 mm - internal radius of min. approx.. 50 mm - Machine total
connection approx.. 1 KW - Operating voltage 230 V accessories:
extendable rail of piece of who characteristics: the machine is stored
condition: immediately operationally price: 3.800, - euro net
location: North-Rhine/Westphalia availability off: immediately
shipping equipment locally: available dismantling, loading and
transport are task of the buyer. The trading firm Ravensberg organizes if necessary gladly the
loading/transport of the commodity. The trading firm Ravensberg is a
broker and not owner of the offered commodity. We point out expressly
that the trading firm Ravensberg furnishes only switching achievements
that is not called even contracting parties of the buyer becomes. All
information is based on the data of the owner. Mistakes remain
reserving.
AD-ID: A360948
More Infos click here
___________________________________________________________________________________
Table milling cutter , MARTIN, T21-Luxus, , engine 5,5 HP of number of revolutions
3/4.5/6/9000 U/min. Lire run protective switchgear of an engine
AD-ID: A382444
More Infos click here
___________________________________________________________________________________
, Hebrock , TF 03, , milling engine 0.5kW, brush engine 0,18 KW, with foot pedal radius
2,5 and 3,0 mm, schwabbeln, round elevation skirt edge photocopying
apparatus TF 03 space requirement 760 x 500 x 400mm, workpiece
thickness max. 45mm
AD-ID: A400817
More Infos click here
___________________________________________________________________________________
Table milling cutter Comaq , Comaq, , , - again painted - number of
revolutions 3000/4500/8000/10000 U/min
AD-ID: A339776
More Infos click here
___________________________________________________________________________________
Table milling cutter Baeuerle , Baeuerle, SFM H 4010, , accessories - milling thorn 30 mm
and 40 mm - rolltisch (tap carriage) - clamping device 8 mm - slot
hood - rotation plate fueer notice - plug socket for feed motion
(shortening saw) Tech. Data - foot brake - number of revolutions
2800/4500/5600/6000/9000/12000 U/min - notice with micro-adjustment -
sliding table lowerable, then as table extension usable - achievement
4.5 and 5.5 HP - spindle again stored - again paints when desired with
buzz saw
AD-ID: A339777
More Infos click here
___________________________________________________________________________________
, Zimmermann, FZ 3 S, , The milling machine FC 3 with the major work areas for the processing of rigid foam (EPS) foam and other materials (for full-body models in the form of prototypes in the packaging industry, etc.). With FC 3 is the possibility of the necessary Fräsbereich individüllen requirements regarding the piece anzupassen.Die size machine is in all directions by hand wheels, levers and Arretierstifte adjustable.
AD-ID: A345605
More Infos click here
___________________________________________________________________________________
kettenstemmmaschine , Rapit, , , stroke approx. 200mm double turning of the
table (right/left) around Schwalbenschwanzfoermige of holes to lift
schnellverstellung of the table in the depth table size 500 x 300 mm
inserted milling chain 14mm broad, 190 mm of length pneumatic and
manual production part tension Bauj
AD-ID: A360174
More Infos click here
___________________________________________________________________________________
Türschloßfräse , Haffner, SL 100, , Schlosskastenfräse machines no. 5047, Engine: 1.5 kW, speed: 2800 rpm., Fräslänge: Chain (slot length): 20 - 455 mm, Stulpfräser (length max.): 315 mm, drill hole spacing max.: 365 mm, Frästiefe: chain ( Slot depth): 150 mm, Stulpfräse (depth max.): 35 mm drücker and keyhole drill (depth): 65 mm Einfräsen Castle box, Stulp, buttons hole and keyhole, with door edition,
AD-ID: A452968
More Infos click here
___________________________________________________________________________________
Round bar milling machine , Loeser, DK 110 , , work area: Diameter
6 - 18 mm of feed speed: approx.. 4 - 7 m/min. Minimum length of the
Kantels: 220 mm driving motor: 0.75 KW/2900 U/min.
AD-ID: A359041
More Infos click here
___________________________________________________________________________________
Tap cutting machine , Panhans, 261 (19121), , uses top condition make Panhans type 261
year of construction 1991 machine NR. M 1531 engine 7.5 KW motor brake
number of spindles 1 stretching height 160 mm in diameter 380 mm of
buzz saw numbers of revolutions 2860 U/min. Table size 900 x 340 mm
notice swivelling 45 reciprocally notice ruler 2700 mm READ production
part tension manually suction connection D. 200 mm space requirement
approx.. LxBxH mm of 1000 x 1600 x 1600 weight approx.. 900 kg stock
location 97447 Gerolzhofen all data without guarantee!
AD-ID: A384381
More Infos click here
___________________________________________________________________________________
Kopieroberfraese , Wichmann, , , HR-REF-1901 Kind of machine: Kopieroberfraese Manufacturer: Wichmann Weight approx.: 150 kg Mass approx.: L (mm): 1,900 B (mm): 1,400 H (mm): 1.200 Technical data: - Side table hinged - operating voltage 380 V - 23,000 rpm. - Frequency changers - Perskemotoren - Fusssteuerung Condition: - immediately operationally Price: 1.490, 00, - euro net Location: North-Rhine/Westphalia Availability off: immediately Shipping equipment locally: available Dismantling, loading and transport are task of the buyer. The trading firm Ravensberg organizes if necessary gladly the loading/transport of the commodity. The trading firm Ravensberg is a broker and not owner of the offered commodity. We point out expressly that the trading firm Ravensberg furnishes only switching achievements that is not called even contracting parties of the buyer becomes. All information is based on the data of the owner. Mistakes remain reserving.
AD-ID: A382955
More Infos click here
___________________________________________________________________________________
Lift link milling cutter , Okoma, SF 3 F, , Year of construction: 1981 spindle: 40 mm of 6 roles feed motion pneumatic adjustment sawing aggregate
AD-ID: A437772
More Infos click here
___________________________________________________________________________________
Rotating table shaper / Frezarka karuzelowa, Knoevenagel, FO1100/800, stock-no. 5162
Rotating table shaper Knoevenagel
type: FO 1100/800
year of manufacture: 1987
table diameter 800 mm
unit 1: routing 11 kW
unit 2: routing 7,5 kW
unit 3: sanding band 4 kW
hydraulic piston for clamping the workpiece
hydraulic swinging of the arms
with router heads
input power 25 kW
weight: 2659 kg
price on demand
****************
Pozycja nr 5162
Frezarka karuzelowa Knovenagel
Type FO1100/800
Serien nr 7453/67
Rok 87
Srednica stolu 800 mm
2xagregat frzujacy
1xagregat szlifujacy
hydrauliczna
moc przylaczeniowa 25 kW
ciezar 2660 kg
,
AD-ID: A418558
More Infos click here
___________________________________________________________________________________
Routing cutter, SCM, R8, , infinitely variably
AD-ID: A308607
More Infos click here
___________________________________________________________________________________
Kettenfraese, Baeuerle, , , swivelling tiltable
AD-ID: A308562
More Infos click here
___________________________________________________________________________________
Slot router / Frezarka oscylacyjna , , , stock-no. 4858
Slot router double sided
oscillating router
2 tables each 450 x 200 mm, tiltable 30° - 0° - 30°
per table 1 pneumatic hold down
weight: 400 kg
price on demand
*****************
Pozycja Nr. 4858
Frezarka oscylacyjna
dwustronna
2 stoly o wymiarach 450 x 200 mm
stoly wychylne 30°-0°-30°
kazdy stol z pneumatycznym dosiskiem elementu,
AD-ID: A431510
More Infos click here
___________________________________________________________________________________
Table milling cutter , SCM, T 120 C, , inclusive. Notice and feed motion direction
of rotation on the right of table size 1100 x 900 mm
AD-ID: A386564
More Infos click here
___________________________________________________________________________________
Table milling cutter , , FS 200S, , Table milling cutter telex 200S, solid and twisting-free grey cast iron table, tiltable milling spindle in series (- 5 - +30) high-quality milling attack with compressor rod system and fine adjustment, 4 milling speeds standard, maximalter milling diameter 200mm, electronic Geschwindigkeitsanzeige over LED s large handwheels to the Spindelverstellung - SPECIAL PRICE sliding table optionally expandable - sliding table optionally and expandable.
AD-ID: A413835
More Infos click here
___________________________________________________________________________________
Tischfraesmaschine , Scheppach, Prima HF-30, , table milling machine Scheppach Prima RF-30, 400V, 30 milling spindle, Fräsanschlag with speeds 4500/9000U/min., Sliding mmit Andschlag. SPECIAL
AD-ID: A413836
More Infos click here
___________________________________________________________________________________
Table milling cutter , Baeuerle, , , Bäürle table milling machine, 400V, speeds: 2800/4500/5600/6000/9000 and 12000 rpm. Right / left over the spindle, 30 swivel milling spindle 90 -45, table size 1150 x 900mm, Präzisionsfräsanschlag. G-1802-M3AL3
AD-ID: A403038
More Infos click here
___________________________________________________________________________________
Frezarka, Baeuerle, SFM, Pozycja nr 5235
Frezarka Bäuerle typ SFM
silnik 4 kW
srednica wrzeciona 30 mm
stol 1100 x900 mm
przedluzenie stolu na obie strony
posuw 4 rolkowy Holz-Her
,
AD-ID: A435375
More Infos click here
___________________________________________________________________________________
1704 Tischfräse mit Rolltisch, MARTIN, T 25 mit Rolltisch, , Engine 5 / 6 KW - 380 volts speed change from 3000 to 6000 or 4500 to 9000 rpm is electrically push of a button, belt manüller only change from 3000 to 4500 rpm. Table size 1180 x 800 mm (polished table area) table height 850 mm table openings 480/305/225/160/105/65 mm Dia. Cone of MK 5 Electrical milling spindle speed Display Electric height adjustment of the milling spindle (150 mm) with urgent and surreptitious course buttons. Scale with 12 FAC [...Technical data truncated]
AD-ID: A394665
More Infos click here
___________________________________________________________________________________
Copying routing cutter/Kopieroberfraese , VEB Knohoma / Hess, KO FK, , HR-REF-2137 kind of machine: Copying routing cutter/Kopieroberfraese manufacturer: VEB Knohoma/Hess type: KO fiber plastic weight approx.: 385 kg of measures approx.: L (mm): 1,200 B (mm): 1,170 H (mm): 1.650 technical data: - Engine performance 2.2 KW - operating voltage 380 V - control voltage 220 V - numbers of revolutions 11,400/17,500 rpm. - Arm approx. 600 mm - table size 1,180 x 860 mm - interior table size 750 x 750 mm - foot pedal - working place light fixture accessories: - Transformer condition: immediately operationally price: 1.300, - euros net location: North-Rhine/Westphalia availability off: immediately shipping equipment locally: available The trading firm Ravensberg is a machine broker. They buy machines directly with us from the owner. For buyers no commissions develop. When desired we organize machine transport. Mistakes in the offer remain reserving.
AD-ID: A441293
More Infos click here
___________________________________________________________________________________
Crosstable with router , Scheer, , , kreuztisch approx. 100x200 cm with
transportation volumes for promoting the plates, milling cutter 1850
W, very stabiele guidance, pneumatic one immersing, Bauj. is
estimated.
AD-ID: A387048
More Infos click here
___________________________________________________________________________________
more kettenstemmer, gotthold haffner, kf 20, , 380 v 1.7 KW of 16 cm milling depth millingbroad 15 mm stroke takes place manuel
AD-ID: A300480
More Infos click here
___________________________________________________________________________________
Copy routing machine, REICHENBACHER, R 618, Copies 3D (figures): Yes; Copies 2D (pictures): Yes; Workpiece stations: 6; Copying length: 1.000; Moulding length mm: 1.000; Spindle distance mm: 240; Weight kg: 1.700; Copy process: Mechanically, automatic; Tracing: Electro-mechanic; Required space lxwxh: 3020x3000x1200; ,
AD-ID: A440384
More Infos click here
___________________________________________________________________________________
Round bar milling machine, FELL, LDF, , round bar diameters: from 12 to 60 mm by steplessly adjustable milling head. Round bar length min.: 560 mm feed motion: 12,18,24 and 36 m/min. (four steps) milling engine: 11 KW Vorschubmotor: 2 KW
AD-ID: A317418
More Infos click here
___________________________________________________________________________________
Starrfräse , SCM, T1100, , Starrfräse Built in 1995, machine-No. Og2385/3394 AB, with 4 roles feed, 8 speeds with gamma device, Drehzahle: 3000/4500/6000/8000/10000 rpm.,
AD-ID: A452407
More Infos click here
___________________________________________________________________________________
Mini tine glue joint cutter set , Leitz, (19133), , uses make Leitz 68 mm with edge tine drill storage site 97447 Gerolzhofen All data without guarantee!
AD-ID: A384395
More Infos click here
___________________________________________________________________________________
Double slot milling cutter, , , , Engine data: 2.2 KW; 380 V; 1430 U/min.
AD-ID: A238204
More Infos click here
___________________________________________________________________________________
TABLE MILLING CUTTER, FABR. SCM, TYP T110, , SCM Tischfräse Type T 110 spindle speed 3000-4500-6000-8000-10000 rpm. Engine brake without feed maintained very
AD-ID: A236872
More Infos click here
___________________________________________________________________________________
Cutter , SCM, T 120 C , , HR-REF-2194 Maschinenart: Tischfräse Manufacturer: SCM Type: T 120 C Built about 1988 Specifications: - 7.5 hp engine - foot brake - a left-running speed stages: 2,900 / 4,400 / 6,000 / 7,800 / 10,000 spindle diameter: 30 mm Status: operational price: 1,450 - Euro net Location: North Rhine-Westphalia region availability: Verladegerät immediately on the spot: with the trading house is Ravensberg machines brokers. They buy machines directly with us [...Technical data truncated]
AD-ID: A444421
More Infos click here
___________________________________________________________________________________
Swiveling spindle table milling cutter, , , , table milling machine, NEW 400V, 4KW (5.5 PS), 30 milling spindle swivel to the rear 90 -45 degrees, table size 1000x500mm, Schlitzschiebetisch 1050mm, table opening of 190mm, 175mm of Spindelnutzhöhe speeds: 1400/3500/6000 and 8000 Rpm. Max. Tool 180/250mm diameter, 120mm and 100mm Vacuum weight of 400kg, with Präszissionsfräsanschlag adjustment system and Sicherheitslinialen SPECIAL 5
AD-ID: A278201
More Infos click here
___________________________________________________________________________________
Milling machine , Panhans, , , Accessories: several cutters, sliding, feeding apparatus
AD-ID: A395920
More Infos click here
___________________________________________________________________________________
Spindle Moulder, SCM, T110, , rigid milling cutter without tap
carriage 4 numbers of revolutions 3000/4500/6000/8000 table size 1.00
x 0.65 mtr. Casting table cultivation of a table extension (Aigner) on
the right of and exhaust hood possible inclusive on the left of
AD-ID: A282642
More Infos click here
___________________________________________________________________________________
Stationary router, Scheer, , , Scheer router, 1800W, 400V, 12mm admission,
SPECIAL PRICE
AD-ID: A323891
More Infos click here
___________________________________________________________________________________
Kervenfraese , MAFELL, ZK115L, , Kervenfraese MAFELL ZK 115 L very good
condition, newly, only unfortunately does not have the previous owner
the initial letters of its name on the housing engraved (that is the
only lack) extremely high performance engine with 2100 Watts very long
life span by very stable drive and camp elements long experiments is
necessary any longer, you must only the Kerve with senkrechten tear
mark out, for tear indicator, Kerventiefe and roof pitch adjust and
already can you mill with slip clutch for milling without jerking and
gentle approach switch with lock-out device good view to the drill the
circulating drill protection a remote maintenance the milling
aggregate can of 0 - 60 steplessly be swivelled the milling depth can
from 0mm 80mm steplessly adjusted become with milling head, diameters
150mm, width 115mm, with 3 measurers for clean planing,with BG- test you gotten to the hobelkopf still some new measurers in
addition with parallel guide stop of the guidance for MAFELL guide
rail could also all attitudes very fast and exactly be made, such
adjustment possibilities had you the equipment for continous use high
milling achievement, sturdy very compact, with no other Kervenfraese
with pointer of incipient crack on the table and, by optimal number of
revolutions and the large miller diameter with the milling cutter can
be worked immediately the milling cutter by us is Germany far
delivered functioned perfectly and demonstrated, thus to have you with
the purchase a risk 220V, 2100W 4700 U/min the machine carpenter does
not come and is from this reason also still newly professional
equipment, no building market scrap iron safe edition by sturdy, large
table from a hobby can to be visited and tested dispatch only in
Germany 50.00 euro please to see it itself also my other articles on
AD-ID: A427417
More Infos click here
___________________________________________________________________________________
Swiveling milling cutter , KOELLE, F 45, , Swivelingready -7 to +45 Numbers of revolutions 3, 4, 5, 6, 8 and 10000 rpm. extended machine table + extendable table edition engine performance 6/8.6 KW of plug socket for feed motion weight approx. 1000 kg
AD-ID: A335743
More Infos click here
___________________________________________________________________________________
Spindle moulder, MARTIN, T 21, Table length mm: 1.000; Spindle motion mm: 150; Rotation speed steps: 4; Rotation speed max rpm: 9.000; Weight kg: 580; 2 rotational directions: Yes; Spindle adjustment: Manually; Spindle: Non-tiltable; Required space lxwxh: 1000x800x?; ,
AD-ID: A419709
More Infos click here
___________________________________________________________________________________
Spindle moulder, JONSEREDS, , Table length mm: 1.000; Spindle: Non-tiltable; ,
AD-ID: A419710
More Infos click here
___________________________________________________________________________________
Zapfenschneid-u. Schlitzmaschine , PANHANS, 261, , buzz saw 2.6 KW milling thorn D
40 mm of milling spindle number of revolutions 3300/4500 U/min.
Milling spindle engine 5.5 KW of max. Tool Durchm. 400 mm weight 550
kg
AD-ID: A435376
More Infos click here
___________________________________________________________________________________
Table milling cutter , Baeuerle, SFM, , -6 Drehzahlen2800/5600/4500/6000/9000/12000 rpm engine power 3-Week 4-roll feed wood Her (4 speeds)
AD-ID: A394662
More Infos click here
___________________________________________________________________________________
Schwenkspindelfräse , Koelle, F45, , Schwenkspindelfräse Kölle Type: F45 used machine function swivel Tested: -5 to 45 electric height adjustment and swivel links running right at eye level panel digital display of height adjustment Long tables Ausziehbare table edition speeds: 3/4/5/6/7/8/9 / 10000 rpm engine performance: 6 / 8.6 kW automatic engine brake Aigner integral attack Built: 1989
AD-ID: A452702
More Infos click here
___________________________________________________________________________________
MILLING CUTTER MACHINE , FLOTT, , , year of construction 1986 engine
performance 2.3 KW/380 V spindle height 100 mm of spindle diameters 30
mm inclusive notice 3 speeds of adjustable 3000/6000/9000 U/min. Table
mass: 650 x 270 mm in very good condition
AD-ID: A432255
More Infos click here
___________________________________________________________________________________
tischfraese, schamberger ebner, schamberger, , engine approx. 4 KW of 6000 min left and clockwise rotation feed motion 1450 - 2850 min
AD-ID: A301597
More Infos click here
___________________________________________________________________________________
Swiveling spindle milling cutter , Holzkraft, T 40 N (19096), , make wood strength type T
40 N inclinable exhibition machine - NEW year of construction 2007
serial no.. 088808 - largely dimensioned double cradle milling
aggregate from grey cast iron - with tiltable milling spindle 90-45 -
4 milling speeds, ideally also for grinding workpieces - right/left
hand motion - milling notice with micro-adjustment and wood strength
system security notice cheeks in series - solid steel/grey cast iron
construction technical data: - effective length of the spindle: 135 mm
- Max. Werkzeugdurchm.: 180 mm - Max. Werkzeugdurchm. unterm table:
180 mm - Max. tap tool diameters: 250 mm - Milling speeds:
1400/3000/6000/8000 U/min. - table dimensions: 560 x 870 mm - engine
performance P2: 3.0 kW/400 V art. NR. 550 2042 all data without
guarantee!
AD-ID: A381739
More Infos click here
___________________________________________________________________________________
Tine milling cutter, Wigo, (11630), , uses, with underframe, work width
approx.. 500 mm, 1 working-spindle all data by reservation. Price from
stock 97447 Gerolzhofen.
AD-ID: A243876
More Infos click here
___________________________________________________________________________________
Dlutarka lancuszkowa, Haffner, SL 100, Pozycja nr 5320
Dlutarka lancuszkowa Haffner
Typ: SL 100
Miecz 150 x50 mm z lancuszekiem
Frez do frezowania zamka skrzynkowego w drzwiach
Frez do frezowania otworu pod klamki
Silnik 1,7 kW 2800 U/min.
zastosowanie do wiercen skrzynki zamkow skrzynkowych w drzwiach, otworow na klucz, i klamek drzwiowych
ciezar 200 kg,
AD-ID: A446158
More Infos click here
___________________________________________________________________________________
chain-morticer, Haffner, KF 20, column model
max. milling depth 160 mm
max. milling width 15 mm
motor is directly coupled
clamping of the workpieces with hand wheel
the lift is manual
our stock-no.: 00 29377
,
AD-ID: A282622
More Infos click here
___________________________________________________________________________________
spindle moulder, Koelle, F 45, Machine type F 45, can be tilted -5 + 45 degrees, spindle diameter 30 mm., motor rpm 2800/4500/6000/10000 per min., motor size 5,5 kW, the machine's motors are rated at 400 volts, equipped with feeder, with 3 rubber wheels, machine width 1000 mm., machine length 1100 mm., machine weight 600 kg.,
AD-ID: A452961
More Infos click here
___________________________________________________________________________________
Table milling cutter , Baeuerle, , , Baeuerle rigid milling cutter with tap
table and sawing aggregate, RL run, spindle 30 mm, pneumatics tension
adjuster, numbers of revolutions adjustably 2800/5600, 4500/9000,
6000/12000 U/min; Machine runs super!
AD-ID: A354113
More Infos click here
___________________________________________________________________________________
Schwenkfraese, Baeuerle, , , swivel milling machine table, 400V 5.5 KW milling spindle 90mm. 90 -45 swivelling speeds: 2800/4500/6000 and 12000 rpm. Präzisionsfräsanschlag, absaugbar. Vorschubaparat 3 scooter speeds: 4.5/7/9 and 14 m / min. G-1264 8
AD-ID: A249224
More Infos click here
___________________________________________________________________________________
Starrfräse , Hofmann, TF 1100, , Type TF 1100, Built in 1980, with sliding, with Haffner 4-roll feed, infinitely variable, right-left run, speed: 3000/4000/5000/6000/8000/1000 rpm.,
AD-ID: A452436
More Infos click here
___________________________________________________________________________________
Spindle router/Frezarka dolnowrzecionowa, Martin, , stock-no. 5121
Spindle router Martin
table size 1050 x 830 mm
with router spindle 30 mm diameter and additional spindle 40 mm
right-left-run
motor 3 /4 kW
with 3-roll-infee Holz-Her
weight: 600 kg
price on demand
*******************
Pozycja-Nr. 5121
Frezarka dolnowrzecionowa Martin
stol 1050 x 830 mm
srednica wrzeciona 30 i 40 mm
silnik 3 /4 kW
bieg prawo lewo
z posuwem 3 rolkowym Holz-Her
,
AD-ID: A397548
More Infos click here
___________________________________________________________________________________
Table milling cutter 7,5kW!!!! long tables , SAC, TS110, , Tischfraesmaschine SAC type TS110 Tischlaenge 2300mm extendable table edition engine performance 7,5kW numbers of revolutions 3000/4500/6000/10000 rpm automatic exhaust brake spindle diameter 30mm year of construction 1992
AD-ID: A393784
More Infos click here
___________________________________________________________________________________
Swiveling spindle milling cutter , Koelle, F45, , Koelle table milling cutter type
F45 tiltable to 45 spindle diameters 30mm Bj approx.. 1970
AD-ID: A378489
More Infos click here
___________________________________________________________________________________
Round elbow milling cutter , Kuper, BFG (18451), , uses make Kuper type BFG machine
NR. 3207-2350 with verlaengerungsschienen 3100 mm of Scheer router TC
16 1800 W stock location 97447 Gerolzhofen all data without guarantee!
AD-ID: A338465
More Infos click here
___________________________________________________________________________________
Table milling cutter, Stehle, , , 30mm thorn solid building
method handwheel adjustment overhauls
AD-ID: A278453
More Infos click here
___________________________________________________________________________________
Overhead router, SCM, R 8, stock-no. 4719
Overhead router SCM
type: R 8
2 speeds adjustable by switch 8000/16000 rpm
motor 3,3 / 2,2 kW
table tiltable 0 – 45°
table size 900 x 760 mm
spindle overhang 700 mm
weight: 400 kg
price on demand
***************
pozycja nr 4719
Frezarka gornowrzecionowa SCM
typ R8
2 predkosci, 8000/16000 obr/min
silnik 3,3/ 2,2 kW
stol wychylny 0-45 °
stol o wymiarach 900x 760 mm
wysieg 700 mm
waga 400 kg
,
AD-ID: A282042
More Infos click here
___________________________________________________________________________________
Swiveling milling cutter, KOELLE, F 45, , table size 120 x 100 cm swivel -5 to +45 speeds 3, 4.5, 6, 8, 10000 rpm. electric motor brake weight about 1000 kg
AD-ID: A321839
More Infos click here
___________________________________________________________________________________
Rigid milling cutter , Martin, D-LS11G, , with slot and tap gumption mechanism and change spindle 380 V/50 cycles per second
AD-ID: A435152
More Infos click here
___________________________________________________________________________________
Copying milling automat, Hempel, FPHK-4, , workpiece length max. 400 mm workpiece
width max. 150 mm of workpiece strength max. 30 mm of engine
performance: 2 x 3 KW weight: approx.. 1170 kg
AD-ID: A298924
More Infos click here
___________________________________________________________________________________
Button manufacturing automat, Frommia, KFA, , furniture button diameters: min. 20mm
max. 80mm furniture button length: min. 20mm max.80mm work: 300-800
St./Std. (depending upon size of) drive of the turntable: infinitely
variably 4-24 U/min. Operating pressure: 6-8 bar air requirement:
approx. 150l/min.
AD-ID: A298928
More Infos click here
___________________________________________________________________________________
Swiveling spindle milling cutter Panhans , Panhans, Typ 259, , Schwenkspindelfräse Panhans with all accessories, performance 6.5 and 8.0 kw, spindle diameter 30 and 40 mm, rolling table with serious attack and renewal, Aignerfräsanschlag with fine tuning, large hood to slits, gothic attack, engine brake, a means of Use milling, schwengbar - 5 to +45, speed 3000/4500/6000/9000, table extension, extendable framework edition, feed is new, very good condition
AD-ID: A443080
More Infos click here
___________________________________________________________________________________
Kettenstemmer , Elu, MKS 10, , Wall mounting tension: 220/380 V 50Hz 6.4 / 3.7 A Power: 2200 Watts Speed: 2700 rpm
AD-ID: A449636
More Infos click here
___________________________________________________________________________________
Tap milling machine , Loeschner Maschinenbau, , , tap milling machine * manufacturers: Company.
Loeschner * year of construction: 1948 * dimensions: BxHxT approx..
1200 x 1200 x 1200 mm * achievement: 2.5 KW * operating voltage: 380
V/50 cycles per second * attached, demonstratable * good condition net
price starting from location): 400.00 EUR
AD-ID: A404699
More Infos click here
___________________________________________________________________________________
Tischfraesmaschine , , JWS-34 KX, , table milling machine JWS-34 KX - NEUMASCHINE - built 2008, 400V 5.7 PS 30-milling spindle with a Useful of 70mm, speeds: 1700/3500/6000 and 8000 rpm., Table opening 160mm. Max. Tool diameter 180mm, chuck recording 8 and 12mm for Oberfräswerkzeug, table size 540x635mm, machine table and aggregates of cast iron - SPECIAL!
AD-ID: A413843
More Infos click here
___________________________________________________________________________________
Milling notice, Panhans, 203 (17162), , uses adjustment with 3 digital displays, over
2 handwheels for Werkzeudurchmesser, total notice, spantiefe, cheek
disalignment inclusive. Casting notice cheeks ex-factory price
approx.. 3.800, - -
AD-ID: A264369
More Infos click here
___________________________________________________________________________________
Table milling cutter , RODOPI, FR 100, , Table size 100 x 80 cm number of revolutions steplessly weight approx. 500 kg
AD-ID: A331893
More Infos click here
___________________________________________________________________________________
Round bar and two-sides border milling cutter , Festo, DS Nr. 290 121, ,
staff diameters: up to 50 mm of staff length: for an unlimited period
weight: approx.. 350 kg of Masse(LxBxH): 700 x 600 x 1300 mm feed
motion: Model DSV NR. 851 0.17/0.45/0.8 HP of 750/1500/3000 U/min.
AD-ID: A342696
More Infos click here
___________________________________________________________________________________
Kettenstemmer, Baeuerle, , , Baeuerle Kettenstemmer, 400V for WALL ASSEMBLY, extents of 1200x800mm, SPECIAL PRICE
AD-ID: A324143
More Infos click here
___________________________________________________________________________________
Kettenfraese, Fezer, , , Kettenstemmer Fetzer
AD-ID: A324144
More Infos click here
___________________________________________________________________________________
round-bar cutting machine for staight parts, , , • Ø 10 - 30 mm
• manuel plug-in unit,
AD-ID: A386965