Used machinery offers: Wood working machinery
> Edge bending machines
(text-only version)
Subject to alterations and error in the technical details, statements and pricing! All offers are not-binding and without obligation.
Available subcats in the main cat Wood working machinery:
Processing machines
Drilling machines
Lathes
Barkers
Conveying machinery
Milling
Heating
Planers
Edge bending machines
Combined machines
Compressors
Lacquering
Dust Extraction
Presses
Saws
Sawmills
Sharpening machines
Sanders
Mortisers
Drying
Carpentry machines
Joinery machines
Window production machines
Veneer fabrication
Wood shredder
Glue coating machines
Dust extraction
Postforming machines
Brushing machines
Double end tenoner
Destacking device
Finest planers
Chip tray production
Pallet production
Turnery machinery
Finger jointing lines
Lapping machines
Improvement machinery
Staplers & nailers
Coating machines
Door manufacturing machinery
Feed apparatus
Other machinery
Notices & aids
Cutting machines
Structuring machines
Zurichtmaschinen
Kehlmaschinen
IMA, IMA, IMA 1 Grundmaschine Typ OKB/K/I/G80/985, , Year of construction 1996 Soft side thermoplastic adhesive machine add treatment of surface outlines Softforming outside of the chain course. With changeable Werkstueckaustand with following Ausleimung with thermoplastic adhesive Edge material and edge rework. Adds a left-sided function furnishes. Technical data: min. workpiece width approx. 200 mm max. workpiece width approx. 800 mm with centric treatment approx. 800 mm min. workpiece thickness approx. 16 mm max. workpiece thickness approx. 40 mm Konst. From the chain course max. outline width approx. 150 mm of min. outline width approx. 10 mm outline-stood approx. 60 mm min. workpiece-stood approx. 60 mm of max. workpiece-stood approx. 535 mm The Grundmaschine consisting of: a heavy welded basic girder construction with bent stands add the attachment the chain run would seem and the Oberdruck, laid out add a max. partial passage of 535 mm from the chain course. 1. with a sliding conveyor chain with 80 mm broad and 60 mm are enough for Kettenplatte 2. frequency-regular upper pressure drive with a compound drive belt with a hearing adjustment by electric motors 3. frequency-regular main drive 6 - 18 m/min 4. frequency-regular conveyor 6 - 18 m/min. stood approx. 200 mm wide, as support for the workpiece within the range of the outline milling's treatment 5. Supporting roller rails for the range of the gluing, deformation and rework for the max. workpiece stood of 535 mm 6. 2 pcs. role supporting rails as support of the workpieces at the right work side, sideadjustably by hand up to 1500 mm 7. 3 pcs. inclined/slanted introduction roles propelled 8. Attack ruler with lateral roles for a side adjusting path of min. 60 mm upto max. 535 mm of the chain course. Adjustable over numerical control axle with measure preselection 9. 2 pcs. Parting agent data with a mounting plate and sideadjustably over digital display 10. Engine 1, installed on stand back milling aggregate to profile cracks or cracks and flattening from above, working with Hoehen and side palpation with 1 engine 1850 W, 200 cycles per second, 1200 UpM, 133 V, in the Gegenlauf, without tools, with mechanical digital display add: - manual horizontal positioning of the milling engine to the fine adjustment, - which stood manual horizontal positioning of the side palpation to the adjustment at the workpiece - manual vertical positioning of the roller tappet to the correction of the chamfer strength 10.1 with single suction nozzles 11. Engine 2, installs profile cracks or cracks and a flattening on stand front milling aggregate to from above, working with hearing and side palpation with 1 engine 1850 W, 200 cycles per second, 1200 UpM, 133 V, in the Gegenlauf, without tools, with mechanical digital display for: - manual horizontal positioning of the milling engine to the fine adjustment and to the adjustment to the depth of profile, - which stood manual horizontal positioning of the side palpation to the adjustment at the workpiece - manual vertical positioning of the roller tappet to the correction of the chamfer strength 11.2 with single suction nozzles 12. Engine 3, installs milling aggregate, engine position 180, for the profile milling from above, at Staenderrueckseite with a side palpation, adjustably of 60 - 535 mm (without hearing palpation), with an engine 6.6 KW, 100 cycles per second frequency-regularly of 3 - 6000 UpM with hydraulic wave, Durchm. 40, 75 mm long horizontal and vertical adjustment of the engine over digital display with d.c. injection brake in the equal and Gegenlauf working more fuer min. a tool diameter 250 mm, 12,1 single exhaust more fuer the milling aggregate 13. Engine 4, installs milling aggregate engine position 180, for the profile milling from above, at stand front with a side palpation, adjustably from 60 - 535 mm (without Hoehentastung), with an engine 6.6 KW, 100 cycles per second frequency-regularly of 3 - 6000 UpM with hydraulic wave, Durchm. 40, 75 mm long horizontal and vertical adjustment of the engine over digital display with d.c. injection brake in the equal and Gegenlauf working more fuer min. a tool diameter 250 mm,
AD-ID: A306465
More Infos click here
___________________________________________________________________________________
Edge press, HESS, MOBIL, Press length mm: 2.500; Number of clamping devices: 6; Heating rail: Yes; Mobile: Yes; ,
AD-ID: A426774
More Infos click here
___________________________________________________________________________________
Double-sided edge Banders IDM CELASCHI, IDM + CELASCHI, ACTIVA SB + TSA 360, Line of double side sizing & edge banding, with automatic handling system, composed of the following machines:
I04014) Bridge loader "3ERRE AUTOMAZIONI" Mod. 250, with roller table and floor roller way
I04015) Double side sizing & edge banding machine "IDM" Mod. ACTIVA/2 SB -9000
SIZING PART (both sides of the machine): Jump Scorer + Hogger + Jump Shaper/Milling Unit
BANDING PART(both sides of the machine): Glueing Area (glue pot, quick-melt unit, 2 band rolls supports) + End-Cutters + Overlapped Trimmers + Tiltable Fine-Trimmers + Milling-Grooving Unit
+ Milling-Grooving Unit + Belt sander + Buffers (?)
I04016) Exit motorised roller way "CLC" with 90° translation motorised conveyor belts
I04017) Double end tenoner "CELASCHI" Mod. TSA 360 with CNC (5+5 units)
I04018) Cage unloader "SERGIANI" Mod. Leomatic S1T1, with roller table and floor roller way
,
AD-ID: A451747
More Infos click here
___________________________________________________________________________________
Edgebander, HolzHer, 1408, - crosscut saw - flush milling aggregate
- edgeband thickness max. 25 mm
- machine length 4400 mm,
AD-ID: A378916
More Infos click here
___________________________________________________________________________________
Milling aggregate, Homag, LF 55 L, , milling aggregate to Homag KR 33 type LF 55
L, NR. 178076/ 0,6KW/Y165-4A-300 cycle per second of 18000 and/min
Lira-existing
AD-ID: A279083
More Infos click here
___________________________________________________________________________________
SINGLE SIDE AUTOMATIC EDGE BANDING MACHINE, SCM, SELECTA 12 FR, Single side automatic edge banding machine
SCM mod. Selecta 12 FR – ANNO 1998
Serial # AL1/001483 Un 3-N-PE-AC415
Specification is:
- Panel thickness : Min. 10 mm Max. 50 mm.
- Minimum working width : 60 mm.-with strip or coiled edging
110 mm.-with solid wood strip edging
- Minimum length of panel : 140 mm.-with strip or coiled edging
200 mm.-with solid wood strip edging
- Minimum edge thickness of coiled edge material : 0,4 mm
- Maximum edge thickness of coiled edge material : 3 mm
- Maximum edge thickness of strip edge material : 12 mm
- Heigth of edge banding material : panel thickness + 4 mm
- Heigth adjustment of operating units : Automatic with top press
- Central suction system 1 hood diam. 180 mm
Lower glue unit, with heavy duty guillotine, 3 pressure rollers (1st one is driven).
End trim x 2 motors o,35 kw 12000 rpm
Top and bottom trimmer with overlapping motors 2 x 0,5 kw 12000 rpm
Tiltable Fine trimmers x 2 motors o,5 kw 12.000 rpm
Corner rounding x 2 motors 0,5 kw 12000 rpm
Edge scrapers x 2
Top and bottom Buffers x 2 motors 0,25 kw 3000 rpm.
Second-hand machine, in working good conditions.,
AD-ID: A383942
More Infos click here
___________________________________________________________________________________
IMA Combima, IMA, Zweitmaschine - Dickkantenbearbeitung, , machine in 2004 outdated, complete outfit for
treatment of thick edges, data see pdf
AD-ID: A339282
More Infos click here
___________________________________________________________________________________
Kantenanleimmaschine, , Kantenanleimmaschine ME 15, , edgebander for pre edges, 400V, hochwärtiges fan, 20 C to 450 C, short warming-up, combined Fräsaggregat with Tastrollen, Bündigfräsung chamfer and rounding, edges strength of 0.4 - 2mm, part strength of 10-45mm, Vorschubgeschw . 5m/min., Speed cutters 12,000 rpm., 120mm Vacuum
AD-ID: A250520
More Infos click here
___________________________________________________________________________________
Edgebander, HOLZHER, TRIATHLON 1425/420, Edgeband thickness max mm: 8; Edgeband height max mm: 66; Thickness of coiled edgeband max mm: 3; Panel length min mm: 140; Workpiece width min mm: 60; Feed max m/min: 16; Machine length mm: 6.450; Compressed air pressure bar: 6; Extraction socket diameter mm: 160; Strip magazine: Yes; Trimming saw,
AD-ID: A412891
More Infos click here
___________________________________________________________________________________
KANTENANLEIMMASCHINE , BRANDT, KD99F, , KANTENANLEIMMASCHINE BRANDT TYPE:
KD99F B.J: 1998 FUGENFRASEN GLUE BASIN CAPS FRASEN FRASEN RUNDFRASEN
DOWN RUNDFRASEN ZIEKLINE ABOVE FOREMEN VERY MUCH PROPERTY CONDITION
AD-ID: A405412
More Infos click here
___________________________________________________________________________________
Kantenanleimmaschine , HEBROCK , AKV 83, , uses, very good condition, Anleimen
of pre-coated thermoplastic adhesive edges up to 1.0 mm with edge
milling cutter inclusive. Complete equipment/option - arms
reciprocally - final cutting station - underframe mobile with door -
extendable arm - 3-Rollen-Vorschubapparat inclusive several 100-Meter
edge material KU and veneer
AD-ID: A415500
More Infos click here
___________________________________________________________________________________
Kantenanleimmaschine, Brandt, KD 86, Tl.-Id. 2056440
Single-sided edge bander in right hand
execution for hot melt gluing, particularly
designed for craftsmen' enterprises.
length 6600 mm
width 1300 mm
height 1800 mm
weight 2500 kgs
total connection: 14 A
,
AD-ID: A370530
More Infos click here
___________________________________________________________________________________
edgebanding machine, SCM, K 201 Compact, CE-sign, completely with control desk, glueingof workpieces to 3 mm of material thickness and 45 mm of width of material, strong role separation to 3 mm, strip magazine, workpiece guidance by chain with role top pressure, central adjustment of the top pressure, high frequency transformer, HF sawing aggregat, HF milling aggregat, engines with quick change system, acoustic enclosure, digital glue temperature control, lower floor panel glue basin, order for glue over roller dosing system, extendable roller with special storage against tilting (each position easily with a hand extendable), central suction nozzle, machine mount for easy moving by elevating truck platforms, glue and edge package... ex-factory price approximately euro 15,000, - unused exhibition machine, newest model, little place, much achievement... a demonstration of this unique machine in our house will convince you! Pleace call us for a meeting...,
AD-ID: A263059
More Infos click here
___________________________________________________________________________________
Kantenanleimmaschine , Hebrock, AKV 83, , With feed. Anleimen to 1mm strength for pre edges. Bündigfräse with neün knives. Emergency use. Please note that the PDF file with our terms and order form.
AD-ID: A419366
More Infos click here
___________________________________________________________________________________
Edgebander, IDM, IDIMATIC 44, Edgeband thickness max mm: 5; Edgeband height max mm: 50; Thickness of coiled edgeband max mm: 3; Panel length min mm: 140; Workpiece width min mm: 60; Feed max m/min: 18; Stepless adjustable feed: Yes; Machine length mm: 5.289; Compressed air pressure bar: 6; Strip magazine: Yes; Trimming saw: Yes,
AD-ID: A444957
More Infos click here
___________________________________________________________________________________
Edgebander, BLAICH, KANTENFIX BOKF, Thickness of coiled edgeband max mm 2; Flush/radius/chamfer milling stations 1; Glue system Glue pot; Availablity ab ca. KW 18; In offer since 04-04-07; Condition Unchecked; ,
AD-ID: A327729
More Infos click here
___________________________________________________________________________________
edge banding machine, single sided, IMA, Combima + TD + FBA, Pos.1 Lengthwise processing machine
IMA Combima/K/II/R75/380/F/R
working width 1500 mm
chain with dogs
equiped each side:
double hogging unit with 2 motors 3,0/4,4KW
hotmelt gluing unit with double coil magazine for 1,3 mm
rough milling unit 2 motors 0,4 KW
fine milling unit 2 motors 0,15 KW
grooving unit with motor 3 KW, tiltable and jumping
Pos.2 turning device
Bargstedt TD 11
Pos.3 Crosswise processing machine
IMA FBA / II/R75 /90
working width 2500 mm
each side:
milling motor 2,0/3,3 KW jumping
double hogging unit with 2 motors 3,0 /4,5 KW
our stock-no. 00 29793,
AD-ID: A433750
More Infos click here
___________________________________________________________________________________
Edgebander, BRANDT, KAE 17, Edgeband thickness max mm 20; Edgeband height max mm 60; Thickness of coiled edgeband max mm 0,8; Workpiece width min mm 70; Feed max m/min 25; Stepless adjustable feed Yes; Machine length mm 6.600; Compression bar 6; Extraction socket diameter mm 80; Total connection kW 30; Strip magazine Yes; Tri,
AD-ID: A353525
More Infos click here
___________________________________________________________________________________
solid wood - edge banding machine, double sided, IMA, , working width: approx. 2.500 mm
coil material and stripes up to approx. 3 mm, lippings up to approx. 20 mm
each side equipped with:
- anti-stick solvent applicator
- scoring unit with motor 1.5 kW
- hogging unit with 1 motor 4.4 kW
- free space for 1 milling unit (500 mm)
- 1 gluing unit no. 04.156 with: *AEROMAT-single-coil- and stripes magazine *main pressure roll. 5 additional pressure rollers *reinforced cutting knife *coil plate for coil diameter up to 850 mm *Quickmelt-hot melt gluing unit make Hardo, approx. 12 l - end-trimming unit 08.42, position top,
2 motors each 400 W, 133 V, 200 cycles, 12000 rpm
- pre-milling /flush milling unit 08.0555, 2 motors each 1000 W, 133 V, 200 cycles, 12000 rpm
- air nozzle
- chamfer-/radius milling unit 08.055, 2 motors each 600 W, 133 V, 200 cycles, 12000 rpm
- corner trimming unit 08.45, 2 motors each 1000 W, 133 V, 200 cycles, 12000 rpm
- Heesemann profile sanding unit M 2, with 1 motor 1.1/1.8 kW
- free space (approx. 850 mm)
- scraping unit, self tracing device
- chamfer sander /buffing unit, with 2 motors each 0.55 kW
- cleaning unit make Wandres
- electronic line control
our article-no.: 00 29474,
AD-ID: A159359
More Infos click here
___________________________________________________________________________________
Kantenbeleimmaschine , Ney, SAM 110, , Hot adhesive coating equipment, 230 V, 50/60 cycles per second, 1720 Watts
AD-ID: A431467
More Infos click here
___________________________________________________________________________________
Kantenanleimmaschine , Brandt, KD 84 C, , Anleimen up to 12 mm; Kappaggr. ; Kombiaggr. Buendig/radius corner copying; Radius drawing blade Schwabbel
AD-ID: A409215
More Infos click here
___________________________________________________________________________________
Edgebander, IDM, IDIMATIC 49, Edgeband thickness max mm: 5; Edgeband height max mm: 50; Thickness of coiled edgeband max mm: 3; Panel length min mm: 140; Workpiece width min mm: 60; Feed max m/min: 18; Stepless adjustable feed: Yes; Machine length mm: 5.670; Compressed air pressure bar: 6; Total connection kW: 23,30; Strip maga,
AD-ID: A411541
More Infos click here
___________________________________________________________________________________
Kantenanleimmaschine, Homag, KLO73, , Edge band height max. 60 mm, cutting shears to, thickness max. 3 mm, concise/radius/chamfering stations, cutting saw, acoustic enclosure, glue system roller,
AD-ID: A156372
More Infos click here
___________________________________________________________________________________
Kantenanleimmaschine , Holz-Her, 1402 MFE, , kantenanleimmaschine year of construction
1996, cutting aggregate chamfering/straight line type 1976 K 2 engines
ever 0.22 KW, 300 cycles per second, 9000 1/min. manually of
adjustably milling aggregate chamfers above/down type 1942 M 2 engines
per 0.6 KW, 300 cycles per second, 18000 1/min on straight lines.
Workpiece thickness min. 6 mm of workpiece thickness max. 45 mm of
workpiece length min. 180 mm workpiece width min. approx.. 60 mm
workpiece projection approx.. 30 mm feed motion 11 m/min. vertically
and horizontal gropingly tiltable of 0-15 degrees in the Gegenlauf
working adjustment over speedometers edge strength max. 8 mm
AD-ID: A393907
More Infos click here
___________________________________________________________________________________
One-sided machine , HOLZ-HER, TRIATHLON 1487, , edge thickness: 0.4 3mm
(roles), 0.4 25mm (strip) edge height: 51/66mm max. Thickness of piece
of who: 6 45/60 mm feed motion: 8 20m/min varicel SPS control adding
drill 2x 2.0 KW of Kappagreggat 2x 0,45kW Fraesagreggat
fraesagreggat-multi 2x 0,6kW (down) 2x 0,45kW mill round off agreggat
mill round off agreggat (above) 2x 0,45kW Universalfraesagreggat
(slots) 1x 3,8kW profile drawing blade Flaechziehklinge
AD-ID: A417583
More Infos click here
___________________________________________________________________________________
Edgebander for shaped workpieces, LANGE, B 56, Edgeband thickness max mm 3; Thickness of coiled edgeband max mm 3; Workpiece thickness max mm 55; Edge length min mm 150; Inner radius min mm 25; Compressed air pressure bar 6; Main motor kW 3,7; Weight kg 100; Cutting knife Yes; Only pre-glued edgeband Yes; CE-mark Yes; Required space lxwxh 1750x,
AD-ID: A367358
More Infos click here
___________________________________________________________________________________
Kantenanleimmaschine , HOLZHER Reich Spezialmaschinen, 1415, , For edges strength up to 25 mm feed 11/15/20 m-min. Glue station granules 1907 Auto-edge magazine 1901 printing unit 1911 Kappaggregat 1916 Fräsaggregat just 1922 2x2, 2 KW 200 HZ to 25 mm Fräsaggregat swivel 2x1, 1KW 200 Hz to 15 mm Nutaggregat 1930 face 2.2 KW Schleifaggregat 1935 Faseschleifaggregat 1937 guard 3100 mm long Freqünzumformer 18 , 5 KVA Gesamtanschlsswert 36.93 KW
AD-ID: A418902
More Infos click here
___________________________________________________________________________________
Kantenanleimmaschine, HOLZ-HER, Typ 14 01, , converted for 3 mm PVC
Umleimer, with radius miller and role cutting shears
AD-ID: A167975
More Infos click here
___________________________________________________________________________________
Kantenanleimmaschine , Ott, S 20 (19136), , uses make Ott type S 20 year of
construction 1976 machine NR. S 1281 edge band thickness 20 mm of caps
from the role to 1 mm cutting aggregate concise milling space
requirement approx.. LxBxH mm of 3500 x 700 x 1100 stock location
97447 Gerolzhofen all data without guarantee!
AD-ID: A384399
More Infos click here
___________________________________________________________________________________
Edgebander, MANEA, M 90, Edgeband thickness max mm: 20; Edgeband height max mm: 50; Thickness of coiled edgeband max mm: 3; Panel length min mm: 135; Workpiece width min mm: 60; Feed max m/min: 24; Machine length mm: 3.940; Compressed air pressure bar: 7; Extraction socket diameter mm: 2x50; Strip magazine: Yes; Trimming s,
AD-ID: A411542
More Infos click here
___________________________________________________________________________________
Rounded corner equipment, Brandt, FP 12, , Softforming depth of profile max. 80 mm of workpiece thickness max. 55 mm of edge thickness max. 3 mm of operating voltage 230 V operating pressure 6 bar of dimension 810 x 600 x 1200 mm work height 1000 mm of foot pedal switches work-overhauls weight 120 kg
AD-ID: A156444
More Infos click here
___________________________________________________________________________________
Kantenanleimmaschine, Holzher, 350, , add massif edges and of role. with Leimstation, cutting plant and Buendigfraese. Laenge 4,000 mm
AD-ID: A161049
More Infos click here
___________________________________________________________________________________
Kantenanleimmaschine, double., IMA, AVM/K/II/G80/622/SR, first class performance machine for work tops
left side fixed
max. working width approx. 5.000 mm
min. working width 400 mm
max. edges 1,5 mm
electronical width adjustment via ball screw spindle for an adjustment speed of 5 m/ min.
2 centre supports
equipment each side:
- hot melt gluing unit 0,8 l
- magazine with 32 coil magazine for automatic coil change
- end trimming unit 08.41 with 2 motors each 150 W, 200 cycles, 12.000 rpm
- fine milling unit with 2 motors each 400 W, 200 cycles, 12.000 rpm
- contour trimming unit with 2 motors for the front side top and bottom
- profile scraper
- flat scraper
frequency converter 6 KVA, 200 cycles
control: IMATRONIC with LCD Display
machine length: 7.900 mm
our article-no.: 00 29455,
AD-ID: A159366
More Infos click here
___________________________________________________________________________________
Cutting station , OTT, TKS, , Table size 100 x 50 cm connected load 0.8 KW for Kantenanleimmaschine for rework Buendigkappen
AD-ID: A422935
More Infos click here
___________________________________________________________________________________
Edgebander, SCM, OLIMPIC S 215, Edgeband thickness max mm: 15; Edgeband height max mm: 60; Thickness of coiled edgeband max mm: 3; Feed max m/min: 18; Machine length mm: 5.160; Compressed air pressure bar: 6; Strip magazine: Yes; Trimming saw: Yes; Flush/radius/chamfer milling stations: 1; Contour copy milling: 2 motors; Buffing ,
AD-ID: A446690
More Infos click here
___________________________________________________________________________________
Kanteneinziehvorrichtung Gummieinziehvorrichtung , Hartmann, STDM, , -Einziehvorrichtung for edges with groove work thickness max 68 mm
AD-ID: A445019
More Infos click here
___________________________________________________________________________________
Homag, Homag, Homag FKL 79/02/QA, , Homag FKL 79/02/QA year of construction 1992 control,
electrical connection, electronics numerical control 30 with central
data acquisition tension operating voltage 380 V, 50 cycles per
second. Control voltage 220 V, 50 cycles per second. SPS - Control FKL
79/02/QA Eiseitige Homag Formatbearbeitungs and kantenanleimmaschine
stop side left. Stand recess for format part. Conveyor chain 80 mm
wide with rubber edition oberdruck motor hoehenverstellbar with group
wedge belt. Magnetic braking of the conveyor chain. Workpiece edition
with role rail, extendable approx.. 70 mm. Flexible stretching system
for the processing units. Chain/chain course with central lubrication.
Glue capstan with feed stop. Hand switch for initialization routine.
Feed motion infinitely variably 10 - 30 m/min. Work height 920 mm work
width min. 70 mm workpiece projection 40 mm of workpiece thickness 7 -
60 mm of 1 x on the left of milling aggregate of kind of condition
pneumatics control 4.5 KW 1 milling engine 4.5 KW, 100 cycles per
second, 6000 1/min. Swivelling range 90 degrees of tool diameters max mill kreuzsupport,
wendeschalter direction of rotation, exhaust hood intermediate
transport with circular guide electro-pneumatic control z. employment.
200 mm without tools space requirement 550 mm GES- LEISTG.: 4.5 KW of
FREQUENCY: 100 cycles per second. Number of revolutions: 6000 1/min.
Change: 1. Sawing diameter 300 mm of 2. Engine 4.5 KW, 50 cycles per
second in place of 4,5 KW, 100 cycles per second. 3. Pneumatics
control for vertical tilting up on workpiece inter+edges 4th to
scratching reference 1. Saw for cutting in the synchronisation 2nd
with appropriate flange of the Homag for wave diameters 35 mm, with
keyway 3. Leuco Ident Nr.001164 1 x on the left of electrical braking
of 0,2 - 3.74 KW of 1 x on the left of milling stands 900 mm of 2
guidance change: Milling stand shortened, for the over driving of
workpieces 1 x on the left of milling aggregate of kind of condition
4.5 KW 1 milling engine 4.5 KW, 100 cycles per second, 6000 1/min. Kreeuzsupport, wendeschalter direction of rotation, exhaust hood
swivelling range 180 degrees for tool diameter max. 200 mm without
tools space requirement: 485 mm, GES- LEISTG: 4.5 KW of frequency: 100
cycles per second of number of revolutions: 6000 1/min change: 1
sawing diameter 300 mm of 2. Engine 4.5 KW, 50 cycles per second in
place of 4,5 KW, 100 cycles per second of 3rd to the Durchterennen 1 x
on the left of Leuco cutting-off saw diameter 300 mm of drilling 60 mm
without keyway, Z = 60 trapezoid surfaces reference 1. Saw for
splitting in the Gegenlauf 2nd with appropriate flange of the Homag
for wave diameters 35 mm, with keyway 3. Leuco Indet No.: 001164 1 x
on the left of electronic braking of 0,2 - 3.74 KW of 1 x on the left
of workpiece excerpt device developed behind the cutting-off saw a
propelled role at the chaining course a not propelled role at the
oberdruck rollenbreite approx.. 300 mm of 1 x on the left of FOLDING
TABLE the separated workpiece strip over a pneumatically steered chute
one disposes and slips on the floor. Max one. Partial length 800 mm max. partial width 450 mm(section width) space
requirement approx.. 1300 mm of 1 x left parting agent-guessed/advised
OBEN/UNTEN order for parting agent by means of Sprueduesen before the
format part. Order from above and down. Manual adjustment with
workpiece projection change. Inclusive one. 2 L parting agent space
requirement: 150 mm reference: constructed before adding milling
aggregate 1 x on the left of recess machine stand for the use of
equipment from down 1 x on the left of adding milling aggregate UF20 2
x 3.0 KW of 2 engines ever 3 KW, 300 cycles per second, 9000 1/min.
For one-sided machines to adding before glue-hurry. Milling stand,
kreuzsupporte, spindelverstellung electro-pneumatic control horizontal
exhaust hood laterally for tool diameter 150 mm without tools space
requirement: 720 mm of Ges Leistg: 6 KW of frequency: 300 cycles per
second of number of revolutions: 9000 1/min. 1 x on the left of electronic braking of 3,75 -7.4 KW of 1 x on the
left of noise protection jointing part set off for adding milling
aggregate with KL/R70 free inserting from long edges limited
accesibility (engines not tiltable), space exhaust 1 x on the left of
universal milling aggregate UP 11,2.2 KW of milling stands,
kreuzsupport with spindelverstellung 1 engine 2.2 KW, 300 cycles per
second, 9000 1/min. at stand back, tiltable max.90 degree of exhaust
hood above wendeschalter for direction of rotation for tool diameter
max. 150 mm without tools space requirement: 470 mm GES LEISTG: 2.2 KW
of frequency: 300 cycles per second of number of revolutions: 9000
1/min. Change: 1 engine at stand front to holzsaegen of the joint 2. Engine 50 cycles per second in place of 300 cycles per second of 1 x
on the left of electronic braking of 0,2 - 3.74 KW of 1 x on the left
of intermediate transport electro-pneumatic steered tiltable, to the
employment milling space requirement: level control appliance of the
melt open quantity of 1 x electronically heats 60 mm of 1 x on the
left of thermoplastic adhesive glue aggregate QA 34 melt open unit
with granulates container temperature control with LED display glue
role on the left of magazine HL 11 - 24 roles of edge thickness = 0.4
- 1 mm edge width = 16 - 65 mm of processing = 65 mm of role diameters
max. 600 mm of number of roles of 24, free standing magazine role
separator role change 6 x 2 roles of autom. and 12 x 1 role propelled
by push of a button or 24 x 1 role by push of a button remaining
length monitoring with 2000 mm of edge monitoring with feed stop 1 x
on the left of pressure zone C 1 squeezing role Durchm. 200 mm of 3
pressing again roles of Durchm. 150 mm of pressure adjustment pneumatically for straight edges 1 x on
the left of change: Kappagregat HL 04 2 engines ever 0.23 KW, 300
cycles per second, 1800 1/min. Edge thickness straight line of max 6
mm chamfers max. 3 mm edge width 65 mm edge cross section max. 390 mm
of cutting depth soft max.20 mm of 2 special TC cutting saws
Durchm.110 mm space requirement: 1250 mm GES-LEISTG:0,46 KW of
frequency: 300 cycles per second. Number of revolutions: 18000 1/min
WK Ueberst.: 30 mm of change: Cutting notices designed for parts with
front side peg 11 mm of the outside edge 1 x on the left of electronic
braking of 0,2 - 3.74 KW of 1 x on the left of adjustment
chamfering/straight line HL 04-05 automatic to the automatic Umtuesten
of straight lines for chamfering caps 1 x on the left of pre-milling
aggregate above and down 0.6 2 engines one above the other ever 0.5
KW, 300 cycles per second, 18000 1/min., manually laterally
displaceable, height adjustment with the oberdruck, in the Gegenlauf
working. Edge thickness max. 8 mm of workpiece thickness 7 - 60 mm swivelling range +/- 1 degree of
2 WPL knifeheads 70 x 14.3 x 16 KN, Z=4 space requirement: 350 mm GES
LEISTG.: 1.2 KW of frequency: 300 cycles per second of number of
revolutions: 18000 1/min 1 x on the left of electronic braking of
0,2-3,74 KW of 1 x on the left of milling aggregate above us down 0.3
KW of 2 engines ever 0.3 KW, 300 cycles per second, 18000 1/min.
manually laterally displaceable, high adjustment with the oberdruck,
in the Gegenlauf working. Spindelverstellung for lateral roller
tappet. Edge thickness max. 1.5 mm of workpiece thickness max. 60 mm
swivelling range 0-30 degrees of 2 WPL knifeheads 70 x 14.3 x 16 KN,
Z=4 space requirement: 500 mm GES- LEISTG: 0.6 KW of frequency: 300
cycles per second of number of revolutions: necessarily for rework
part function mode after start-up min sounds to 18000 1/min 12 x on
the left of extension noise protection aggregate BY 100 mm of 1 x on
the left of noise protection Tuerverrigelung according to BG
regulation after 4. a signal, within a further minute the doors must be closed, otherwise
the feed motion stands for quietly 1 x on the left of direction
glue-adds removal of adhesive remainders within the range of the glued
joint. Scanning from above and down workpiece thickness 7 - 60 mm of
high adjustment with the oberdruck with tungsten carbide measurer
without exhaust space requirement: 350 mm reference: constructed on
575 mm place 1 x on the left of chamfering aggregate + down with
oscillation to the Handy one the edges 2 engines 0.25 for KW
above make each, individually hung up diagonally hochen and
sideadjustably high adjustment with the oberdruck oscillation
mechanism using the disk width for upper and lower engine workpiece
thickness max. 60 mm of 2 engine disks Durchm. 150 x 50 x 25 mm space
requirement: 625 mm GES LEISTG: 0.5 KW of 1 pieces of frequency
changers 15 KW of 300 cycles per second IP 54 with cable connection to
the switchgear cabinet, approx.. 3 m long 1 pieces of Homatic Elektroniksteuerung IT 12
Speicherprogremmierbare control (SPS) system "Homatic 2000 "
with light emitting diode 11 x on the left of extension Homatic
electronics control per stufensprung 1 x on the left of flexible edge
secondary control 1 pieces of monitor input numerical control 30
Homatic monitor input with exzellenter prompting for the control and
administration of work programmes of up to four machines or six
sections. Hardware: - CSU 68070 with 2 MByte RAM - VME bus system - 1
non removable disk drive assembly 40 MByte - 1 floppy disk drive
assembly 3 1/2 tariff - monitor 12 tariff with keyboard built into
housings 1800 x 600 x 600 mm (adjustable) - 6 serial Schnittschtellen
R-S 232 to the machines and for the printer - duer network connection
prepares ARCNET with employment of an additional ARCNET map software:
- multitasking Echtzeitbetriebbsystem OS-9
AD-ID: A306575
More Infos click here
___________________________________________________________________________________
Edgebander for pre-coated edges, HIRZT, B 300, Edgeband thickness max mm 3; Panel thickness max mm 45; Thickness of coiled edgeband max mm 3; Machine length mm 2.510; Total connection kW 3,8; Weight kg 380; Feed max m/min 6; Cutting knife Yes; Trimming saw Yes; Flush milling Yes; Radius milling Yes; High frequency motors Yes; Sound enclosure Ye,
AD-ID: A324210
More Infos click here
___________________________________________________________________________________
KANTENANLEIMMASCHINE , HOLZHER, PERFECT 1424, , 0 23) KANTENANLEIMMASCHINE HOLZHER Type: PERFECT 1424 BJ: 1994 glue basin caps milling milling Rundfrasen Ziekline polishing machine Length: 5.80 m
AD-ID: A446718
More Infos click here
___________________________________________________________________________________
Kantenanleimmaschiine , HOLZHER Reich Spezialmaschinen, 1401, , Anleimen and milling 0,4-20 mm automat.Kantenmagazine for roles and strip product increased 2mm to Kappylinder available in early October
AD-ID: A449444
More Infos click here
___________________________________________________________________________________
Rounded Parts Edge Banding Machine, HEBROCK, AKV 88 F, For gluing precoated edging material on rounded parts; 1. Fan for the edge material; 2. Fan for the glue; egde thickness 0,4 - 2 mm; workpiece thickness 10 - 40 mm
Contact person:
Ludger Reuther
Uli Stalter,
AD-ID: A419715
More Infos click here
___________________________________________________________________________________
Edgebander for shaped workpieces, BRANDT, KTD 72, Edgeband thickness max mm 3; Edgeband height max mm 60; Thickness of coiled edgeband max mm 3; Workpiece thickness max mm 55; Inner radius min mm 25; Compression bar 6; Total connection kW 3; Weight kg 280; Feed max m/min 9; Stepless adjustable feed Yes; Cutting knife Yes; Mechanization Powered fee,
AD-ID: A331017
More Infos click here
___________________________________________________________________________________
SINGLE SIDE EDGE BANDER IMA Quadromat 4012 F, IMA, Quadromat 4012 F, SINGLE SIDE EDGE BANDER
- With CE mark
- With safety & sound-proof enclosures
- Automatic, with motorized bottom feeding track (estimated power KW 1.5)
- With SIKO for an easier adjustment
- With lamp to heat the workpieces before glueing
- With band coils support
- With side-bar (with plastic wheels) for the workpieces supporting
- Equipped with the following working units:
- No. 2 Rectifiers (vertical pre-milling units), power KW 3 x 2 motors
- With straight Glueing unit (for thin edges, PVC/ABS 3 mm & Solid Wood up to 12 mm edges)
- End cutting unit (power KW 0.4 x 1)
- Multiple (multi function) Milling unit for the chamfer and radious milling of the top
edge and of leading and corner rounding, with quick change device ??? (KW 0.66 x 1)
- Multiple (multi function) Milling unit for the chamfer and radious milling of the
bottom edge and of leading and corner rounding, with quick change device ?? (KW 0.66 x 1)
- Band Scraping unit
- Glue Scraping unit
- Buffing unit (KW 0.25 x 2),
AD-ID: A451804
More Infos click here
___________________________________________________________________________________
Format working on and kantenanleimmaschine , Fabr.: Homag , Typ: KF 66/14/QE/25/II, , Work width: 2,500 mm
AD-ID: A356693
More Infos click here
___________________________________________________________________________________
Kantenanleimmaschine for round parts , Fabr.. Brandt, Typ: R 24, , Workpiece diameter: max. 1960 mm of min. 400 mm Edge width: max. 60 mm of min. 15 mm turntable speed: 1,2 - 7 rpm. infinitely variably - concise milling/down above
AD-ID: A356714
More Infos click here
___________________________________________________________________________________
Softforming Kantenanleimmaschinenstrasse, IMA, Combima, built up in U-form
high flexible line with electronical adjustment for different edge-processing
consisting of:
1 combined edgeprocessing machine IMA Combima K/II/R80-4:1/2180/v/R4/SO2
double sided in the sizing section
max. working width 2000 mm
guiding decivce for slim parts
equipped on each side:
- spraying seperation device
- milling motor, jumping 4.4 kW
- milling motor jumping 4.4 kW
- double hogging unit with 2 motors 4.4 kW
- milling motor ( only right side ) 4.4 kW
- scoring saw for inlay ( only left side )
equipment on left side:
- 4 x milling motor 4.4 kW, tiltable, jumping
- free space 1200 mm
- brushing unit with motor 0.25 kW
- IR - heating zone
- Softforming gluing unit with double coil magazine
- premelting unit
- heating blower from top
- free space for hot blower from bottom
- profile pressure zone revolver for 10 profiles
- gluing unit for straight edges with double coil magazine
- 5 roller pressure zone (sparate adjustable)
- premelting unit
- endtrimming unit with 2 motors 0.4 kW
- rough milling unit with 2 motors 1.0 kW
- fine milling unit with 2 motors 0.150 kW
- profile milling unit with 2 motors 0.6 kW
- fine milling unit wirh 2 motors 0.150 kW
- contour milling unit form bottom with 2 motors 0.22 kW
- contour miling unit from top with 2 motors 0.22 kW
- contour milling unit (for S-profile) from bottom with 2 motors 0.28 kW
- profile scraping unit - flat scraper
- free space 200 mm for heating unit
- polishing units for vertical edges with 2 motors 0.55 kW
- buffing unit with 2 motors 0.55 kW
- free space for add buffing unit
- outfeeding transport belts
- Imatronic line control
1 angular transport 180 degrees make Meinert 1 combined edgeprocessing machine IMA Combima K/II/R80/1980/v/R4/SO2
single sided
equipment on left side:
- 1 scoring motor 0.4 kW
- 4 x milling motor 4.4 kW jumping, tiltable
- free space 1200 mm
- brushing unit with motor 0.25 kW
- IR - heating zone
- Softforming gluing unit with double coil magazine
- premelting unit
- heating blower from top
- free space for hot blower from bottom
- profile pressure zone revolver for 10 profiles
- gluing unit for straight edges with double coil magazine
- 5 roller pressure zone (sparate adjustable)
- premelting unit
- endtrimming unit with 2 motors 0.4 kW
- rough milling unit with 2 motors 1.0 kW
- fine milling unit with 2 motors 0.150 kW
- profile milling unit with 2 motors 0.6 kW
- fine milling unit wirh 2 motors 0.150 kW
- contour milling unit form bottom with 2 motors 0.22 kW
- contour miling unit from top with 2 motors 0.22 kW
- contour milling unit (for S-profile) from bottom with 2 motors 0.28 kW
- profile scraping unit - flat scraper
- free space 200 mm for heating unit - polishing units for vertical edges with 2 motors 0.55 kW
- buffing unit with 2 motors 0.55 kW
- free space for add buffing unit
- outfeeding transport belts
- Imatronic line control
our article-no.: 00 29557
,
AD-ID: A184376
More Infos click here
___________________________________________________________________________________
Kantenanleimmaschine , Hebrock, AKV 2000 DK (18988), , uses make elevation skirt type AKV 2000
DK year of construction 1991 machine NR. 2226 edge band thickness 5 mm
edge band height 55 mm of strong edges up to 5 mm of caps of the role
up to 2.5 mm cutting aggregate concise milling chamfering/radius
milling granulates high-speed heating basin acoustic enclosure mobile
gr. role edition suction connection D. 100 mm space requirement
approx.. LxBxH mm of 3400 x 900 x 1200 swinging out workpiece editions
weight approx.. 610 kg total connected load 11.5 KW stock location
97447 Gerolzhofen all data without guarantee!
AD-ID: A374403
More Infos click here
___________________________________________________________________________________
double-sided edge working on automat , Homag, KF66/18/G/35/2+500, , machine II, Softforming, work
width 3,500 mm, rolling chain with cams
AD-ID: A330958
More Infos click here
___________________________________________________________________________________
one-sided edge processing machine , IDM, , , Linksmaschine, Softforming, max. workpiece-stood approx. 100 mm
AD-ID: A330962
More Infos click here
___________________________________________________________________________________
Kantenanleimmaschine , Ott, S30, , kantenanleimmaschine Ott type S30 of
aggregates: Glue basin/granulates Vorkappen (cutting shears) concise
of saws concise milling profile milling aggregates tiltable feed speed
steplessly overall length 4,5m total depth 1m capacity 21kW year of
construction 1981
AD-ID: A430159
More Infos click here
___________________________________________________________________________________
Kantenanleimmaschine , Hebrock, AKV 1000 VS, , Achievement: 6.8 KW connection: 400V workpiece width at least 70 mm of workpiece thickness at least 10 mm, max. 50 mm of Werkstuecklaenge at least 175 mm edge material concise cutting to 3 mm edge material height max. 60 mm of cutting station of 2 milling aggregates (down above) chamfering milling Anleimen and concise milling from pre-coated edge material bevel workpiece edges possible The machine can be visited and tested after date arrangement at any time. Supply abroad possible location: Duesseldorf (Viersen)
AD-ID: A371525
More Infos click here
___________________________________________________________________________________
edge banding machine, LMB / Lange-Maschinenbau, B46,
technical details:
-table top unit
Edge banding machine for applying pre-glued edge
material to straight and curved workpieces.
With automatic edge material feed-in.
Glue reactivation with hot air.
End trimming via foot switch.
Powered pressure roller.
workpiece thickness: 8 - 55 mm
workpiece width: min. ca. 20 mm
workpiece length: min. ca. 140 mm
edge thickness: 0,4 - 1,0 mm
inner radius: 25 mm
stock-no.: 00 29679,
AD-ID: A310270
More Infos click here
___________________________________________________________________________________
Homag road , Homag, , , consisting of 1st role intake table approx. 5 m long 2. Treatment of formats flat steel bar with central computer for the controlling of the entire machine sections after a program number) Zerspaner left + RH of middle section saws crease head left + RH 3. Distribution station of the middle section + intake into the KL 4. Coupled one, one behind the other interlocked KL + KR to proceed (one behind the other in such a way that in the run also narrow parts of 110 mm broad can be reciprocally bekantet) Both machines are identically equipped: Edge gluing station of fuer Duenn and thick edge From downside (Lamello) 1 groove aggregate from the side (Lamello) 1 crease head from page 1 groove head from downside edges 2 chamfering aggregates above and down 45 degrees each of 1 drawing blade 1 rear edge concise caps mill 1 groove aggregate concise 5. Turning station and angle delivery 6. Key-fields (with own computer to the separate enterprise only this machine section) both machine parts (left + RH) are equivalent equipped Milling head to the treatment of formats of the rear edge Zerspanereinheit 1 crease head Glue-hurry for Duenn and thick edge 1 groove aggregate from downside (Lamello) 1 groove aggregate from the side (Lamello) 1 groove aggregate from above (Lamello) 1 groove milling head from downside Edges mill buendig, corners copy 2 chamfering drills above and down, 45 degrees Drawing blade sharpening aggregate for natural wood edges Schwabbelaggregate The entire machine road was reequipped on hydraulic cylinders, in order to e.g. ensure the fast Lamello clock (no pneumatics with in and Aussatz of all aggregates).
AD-ID: A362335
More Infos click here
___________________________________________________________________________________
Kantenanleimmaschine , OTT, Twister, , Anleimen to 10mm: Fuegefraesaggr.;
Kopierfraesaggr. Nutaggr.; Doppelkappaggr. concise u. Feinfraesaggr.
Radius-und surface drawing blade
AD-ID: A409106
More Infos click here
___________________________________________________________________________________
Kantenanleimmaschine , Ott, S40-S, , Caps / Flush / Radius / scraper radius 5.8 mtr. 125 kW operating from 60 A task available from the end of June 2008
AD-ID: A436185
More Infos click here
___________________________________________________________________________________
Edgebander, HOMAG, KR 78, Edgeband thickness max mm 14; Edgeband height max mm 65; Thickness of coiled edgeband max mm 3; Workpiece width min mm 55; Feed max m/min 30; Stepless adjustable feed Yes; Machine length mm 8.550; Premilling Yes; Strip magazine Yes; Trimming saw Yes; Flush/radius/chamfer milling stations 2; Univers,
AD-ID: A376428
More Infos click here
___________________________________________________________________________________
Edgebander, HOLZHER, EXPRESS 1438, Edgeband thickness max mm 13; Edgeband height max mm 51; Thickness of coiled edgeband max mm 3; Panel length min mm 180; Workpiece width min mm 85; Feed max m/min 16; Machine length mm 5.030; Compressed air pressure bar 6; Extraction socket diameter mm 140; Strip magazine Yes; Trimming saw Yes; Flu,
AD-ID: A391275
More Infos click here
___________________________________________________________________________________
Edge working on automat, Homag, KF64, , I. Machine, work width 1,500 mm, rolling chain, work width and structure that, aggregate after customer's request
AD-ID: A200402
More Infos click here
___________________________________________________________________________________
Kantenanleimmaschine , Homag , KR 75 / QL / S2, , technical data: Workpiece thickness 15-55 mm
feed motion infinitely variably to 24 m/min. Magazine for thin edges,
to 12 roles thermoplastic adhesive aggregate QL 34 2 cutting
aggregates 2 pre-milling aggregates 2 milling aggregates 2 brushes
AD-ID: A398168
More Infos click here
___________________________________________________________________________________
Edgebander , Brandt, SKM 100/3, , For pre edges up to 2 mm thick, feed, separation and role pneumatic capping, RF-milling cutter with radii R = 2 m, mobile.
AD-ID: A452087
More Infos click here
___________________________________________________________________________________
Edgebander , Ott, EUROmatic, , Anleimen to 15 mm; plastic 3 mm; automatically. Edge / roll magazine; Doppelkappaggr.; Bdigfrsaggr.; Fasefrsaggr.; Radiusfrsaggr.; Eckenabrundaggr. Scraper; Putzaggr.
AD-ID: A438019
More Infos click here
___________________________________________________________________________________
edge bander, Goliath, Vario (19274), exhibition machine - NEW
manufactured by Goliath
type Vario
built in 2008
for cambered a. straight edges,
mobile edge bander
also suitalbe on construction sites,
for all manual edge bandings,
with direct glue application to the edge edge height 15 - 40 mm
edge thickness 0.3 - 2 mm
glue application temperature 160°C
feed speed infinitely variable
rotation speed of the drive roll 1 - 4 m/min.
volume glue container 0.3 l
weight 7 kg
connected power 230 V
manufactured in the EU
No responsibility is taken for the correctness of this information! ,
AD-ID: A422688
More Infos click here
___________________________________________________________________________________
Kantenanleimmaschine , HEBROCK, AKV 83, , for pre-coated edges (SK-edges) M. feed motion M. Buendigfraesern connected load 3 KW
AD-ID: A394258
More Infos click here
___________________________________________________________________________________
Edge bander single sided, HOMAG, KLO74, Fence left
Throughfeed speed continuus adaptable 10-30 m/min
Working height: 880 mm
Working width min: 70 mm
Workpiece outstand: 40 mm
Workpiece thickness: 7 - 60 mm
Edges: strokes: thickness 0,4 - 20 mm
Edges: Coils: thickness: 0,4 - 3,5 mm
Waste conveyor in machine base
Glueing part
Edge/coilmagazine HL 27
Pressurezone with 4 big rollers
Sound enclosures over all milling/trimming units
Special end trims chamfer and straight: 2 motors each 1 kW, 300 Hz, 18000 rpm
Rough trimming top and bottom: 2 motors each 1.5 kW, 300 Hz, 18000 rpm
Fine trimming top and bottom: 2 motors each 0,6 kW, 300 Hz, 18000 rpm
Profilescraping
Beltsanding device
Frequency changer 300 Hz, IP 54, 10 kVA,
AD-ID: A360878
More Infos click here
___________________________________________________________________________________
Edgebander IDM E. 1/65, IDM , E. 1/65, - Heavy duty machine
- With safety & sound-proof enclosures
- With separate command and electrical cabinet
- With frequency converter KVA 12
- With bottom motorized feedeing chain (adjustable speed, power KW 2,2)
- With top pressure belt
- With Bottom glue pot
- With Glueing unit and pression rollers
- With the following working units:
* 1+1 End-cutting units, turnable (HP 0,5x2 at 12000 RPM)
* 1+1 Rough Trimmers, overlapped, (estimated HP 2x2 at RPM 12000), with SIKO readouts
* 1+1 Fine Trimming Units, 0°-25° tiltable (HP 0.3 x 2 at RPM 12000) with SIKO
* 1+1 Top Rounding unit (HP 0,3x2 at RPM 12000)
* 1+1 Bottom Rounding units (HP 0,3x2 at RPM 12000)
* 1 Free space,
AD-ID: A452623
More Infos click here
___________________________________________________________________________________
AKV, Hebrock, AKV 069, , For edges up to 1 mm equipped with pre-coating, Unterschrank mobile, arms reciprocally, feed motion, role separation, edge milling cutter with TC measurer again, overhauls, workshop-examined.
AD-ID: A316175
More Infos click here
___________________________________________________________________________________
edgebanding machine, EBM, KDP 114 SLK, built in 1999, with noise reduction housing, with cutting units, with profile milling units, superfast glueing hot pot, scraper unit, polishing unit, works from 0.4 - 5 mm material, very good condition, exfactory price more than 25.000 Euro... ,
AD-ID: A397918
More Infos click here
___________________________________________________________________________________
Kantenanleimmaschine , OTT, ATLANTIC, , Anleimen 0.4 - 10 mm thick piece min. 8 mm, part thickness max. 42 mm, facilities:-Schnellheizbecken-pneumatic slides withdrawal Kappschere-automatic magazine Kappaggregat-Bündigfräsaggregat-Feinfräsaggregat-Ziehklingenaggregat edge cleaning device channel controller with LCD displays weight 1330 kg Dimensions L / T / H mm 3700/950/1240
AD-ID: A404715
More Infos click here
___________________________________________________________________________________
, IMA, QUADROMAT , part Id-no. 2055215 year of construction 1999 machine model one-sided machine model unilateral width of work piece min. 70 mm length of work piece min. 150 mm height of work piece min-max 10-45 mm edge thickness min. max. 0,4-10 mm feed m/min. 18 m/min work piece overhang 37 mm stop side right attaching 1 Anzahl pro Seite glue indication glue roller gluing aggregate PU edge magazin roller 0,4-3 mm edge magazin massive 10 mm pressure zone straight snipping chamfer-straight profile trimming / copying (2 motors) 1 Anzahl pro Seite profile sliding blade bottom 1 Anzahl pro Seite flat sliding blade top/bottom 1 Anzahl pro Seite buffing aggregate top/bottom 1 Anzahl pro Seite height adjustment powered electronic control 1 machine dimension without accessories length 6900 mm width 1400 mm height 1800 mm ,
AD-ID: A377814
More Infos click here
___________________________________________________________________________________
KANTENANLEIMMASCHINE , HEBROCK, AKV 2000 V, , Kappstation Fräsaggregat bevel angle rolls 0.5 - 3 mm piece width at least 70 mm thick piece at least 10 mm, max. 55 mm piece length at least 270 mm edge material height max. 60 mm total power requirement approximately 5.9 kW engine power 4.8 kW role-speed train about 6 m / min. Operating Instructions
AD-ID: A362003
More Infos click here
___________________________________________________________________________________
edge banding machine, single sided, IMA, Combima/K/I/830/R, workpiece infeed device, with a driven horizontal stop chain approx. 1.800 mm long
scoring unit, controllable, with 1 motor 2,5 kW
hogging unit, with 1 motor 4,4 kW
milling unit, controllable, tiltable
with 1 motor 3,3 kW
milling unit, controllable, tiltable, with 1 motor 3,3 kW
breaking-through in chain track incl. suction hood for saw cuts beyond the chain transport area
gluing unit with hot melt glue application 0,8 l
16-coil-magazine for coil material up to 1,5 mm thickness
gluing unit with hot melt glue application 0,8 l
1-coil-magazine for coil material up to 3 mm thickness
end trimming unit 08.41, approx. 25 degrees tiltable by hand, with one front and one rear motor 150 W,
fine milling unit top and bottom,
tracing from top, bottom and lateral,
with one top and 1 bottom motor 150 W
fine milling unit top and bottom,
tracing from top, bottom and lateral,
with one top and 1 bottom motor 150 W
scraping unit, self tracing
dimensions (L x W x H)
10.700 mm x 4.100 mm x 1.800 mm
our article-no.: 00 29549
special sale price!,
AD-ID: A206178
More Infos click here
___________________________________________________________________________________
Edgebander, POLYMAC, ERGHO 3, Edgeband thickness max mm: 15; Edgeband height max mm: 50; Thickness of coiled edgeband max mm: 3; Panel length min mm: 150; Workpiece width min mm: 50; Feed max m/min: 20; Machine length mm: 4.100; Strip magazine: Yes; Trimming saw: Yes; Flush/radius/chamfer milling stations: 2; Scraper: Yes; Buff,
AD-ID: A429916
More Infos click here
___________________________________________________________________________________
KANTENANLEIMMASCHINE , OTT, EUROMATIC, , KANTENANLEIMMASCHINE Manufacturer: OTT Austria Type: Euromatic Built: 1998 CE standard function: glue-cut-vorfräsen-precision-aufrunden-unterteilrunden-copy-zieklinen-polish
AD-ID: A446073
More Infos click here
___________________________________________________________________________________
Edgebander , Lange, B46, , For pre edges to 1mm Stärke.Rollentrennung limit switches on foot or switch. (Fixlängen to 2mm strength). Table length about 1750 mm. Circulation extendable. Cabinet mobile.
AD-ID: A452067
More Infos click here
___________________________________________________________________________________
panel sizing and edge banding plant, single sided, Homag, KFL 53/15/PU/QA/I, pos.1
feeder
make SAG
pos.2
cross cut saw
make Biesse, type Crossmatic
pos.3
panel sizing and edge banding machine, single sided
make Homag
fixed fence left side
equipment right side
- trimming unit
for workpiece parallel trimming in the first pass
1 motor 4,4 kW, 100 cycles, 6.000 UpM
equipment left side
- standard trimming unit pneumatic control 4,5 kW
1 milling motor 4,5 kW, 100 cycles, 6.000 1/min.
- standard trimming unit pneumatic control 4,5 kW
1 milling motor 4,5 kW, 100 cycles, 6.000 1/min.
- standard trimming unit pneumatic control 4,5 kW
1 milling motor 4,5 kW, 100 cycles, 6.000 1/min.
- hot melt gluing unit QA 20/25
- PUR-melting unit MELTEX
- PUR-gluing unit
- magazine HL 20
edge material thickness = 0,4 - 6 mm
- magazine HL 11 - 24 coils
edge material thickness = 0,4 - 1 mm
- magazine HL 12 - 6 coils 3,5 mm + stripes
edge material thickness = 0,4 - 14 mm
- coil magazine - 6 coils
edge material thickness 0,4 - 3,5 mm
- pressure zone G
1 main pressure roll driven diam. 200 mm
12 pre-pressure rollers diam. 70 mm
- end-trimming unit chamfer and straight 0,6 kW
2 motors each 0,6 kW, 300 cycles, 18.000 1/min.
- pre-milling unit top and bottom 0,6 kW
2 motors each 0,6 kW, 300 cycles, 18.000 1/min.
- milling unit top and bottom 0,6 kW
2 motors each 0,6 kW, 300 cycles, 18.000 1/min.
- milling unit top and bottom 0,6 kW
2 motors each 0,6 kW, 300 cycles, 18.000 1/min.
- multi- profile trimming unit MF20 bottom
2 motors each 0,4 kW, 300 cycles, 18.000 1/min.
- multi- profile trimming unit MF20 top
2 motors each 0,4 kW, 300 cycles, 18.000 1/min.
- scraping unit – profile
- buffing unit
2 motors each 0,25 kW
- buffing unit top and bottom with oscillation
4 motors each 0,25 kW
- HOMATIC-electronic control
- electronic line control
- production line control NC 50
pos.4
transport system
make Bargstedt
our stock-no: 0113919
,
AD-ID: A367324
More Infos click here
___________________________________________________________________________________
Edgebander, HOMAG, KR 13, Edgeband thickness max mm: 6; Edgeband height max mm: 50; Thickness of coiled edgeband max mm: 3; Panel length min mm: 150; Feed max m/min: 12; Machine length mm: 4.150; Compressed air pressure bar: 6; Total connection kW: 9,30; Strip magazine: Yes; Trimming saw: Yes; Flush/radius/chamfer milling s,
AD-ID: A427832
More Infos click here
___________________________________________________________________________________
Edge bander, Brandt, KE 12-20/50, stock-no. 4556
Edge bander Brandt
type: KE 12-20/50
year of manufacture: 1980
for PVC- and solid wood edge 0,4 – 20 mm
input power 11 kW
with roll magazin
granulate glue
4 pressure rolls – 1 driven
clipping knife for PVC-edge
1 clipping motor with 2 clipping saws for front / back
2 router motors top / bottom
infeed stepless adjustable 7 – 25 m/min.
width of the workpiece min. 70 mm
thickness of the workpiece min. 10 mm – max. 55 mm
compressed air need 10 bar
overall length of the machine 4200 mm
weight: 1200 kg
price net ex stock: 6000,-- Euro,
AD-ID: A255776
More Infos click here
___________________________________________________________________________________
Single sided profiling and edgebanding machine for, IMA & RBO, , Feeder RBO
Typ SELECTA S M
Nr. 960015/1
Year 1996
IMA
Single sided profiling and edgebanding machine for shaped panels
Edgematerials: Veneer/plastics, pre-glued edges on coil
min. striplength: 350 mm
min. stripheight: 14 mm
max. stripthickness: 3,0 mm
min. workpiecelength: 300 mm
max workpiecelength: 2500 mm
min. workpiecethickness: 12 mm
max. workpiecethickness: 28 mm
max. profile-depth: 250 mm
min. workpiecewidth: 160 mm + profile-depth
max. workpiecewidth: 2000 mm + profile-depth
throughfeedspeed: 5-25 m/min
Electrical adaption of height of upper pressure belt
separate electrical cabinet and controls
machinedocumentation: dutch
Fence left, manually adjustable 55 - 305 mm
Waiste-transportbelt
2x Profiling units: 350V, 300Hz, 18000 rpm
Profileglueingpart, max throughfeedspeed: ca. 10m/min
radius: at least 100 mm diameter (depends on edgematerial)
extra pressurezone
End trims: 5° adjustable, 2 Motors 150 W, 133V, 200 Hz, 12000 rpm, with brakes
Finetrimming top/bottom: 1 kW, 150 Hz, 9000 rpm, with mechanical readout, without brakes
Stacker RBO
Typ SELECTA 80
Nr. 960016/1
Year 1996
,
AD-ID: A376390
More Infos click here
___________________________________________________________________________________
edgebanding machine, SCM, K 201 HF- E, built in 2006, CE-sign, completely with control at the switchgear cabinet, glueing of workpieces to 3 mm of material thickness and 45 mm of width of material, strengthened role separation to 3 mm, strip magazine, workpiece guidance by chain with role top-pressure, central adjustment of the top-pressure, high frequency transformer, HF sawing aggregat, HF milling aggregat, engines with quick change system, drawing blade aggregate, buffing aggregat, acoustic enclosure, digital glue temperature control, lower floor panel glue basin, order for glue over roller dosing system, extendable rollertable, central suction nozzle, machine mount for easy moving by elevating truck platforms, glue and edge package, ex-factory price over euro 19,500, - unused exhibition machine (picture 2)…now for only ,
AD-ID: A278762
More Infos click here
___________________________________________________________________________________
Edge bander, IMA, AVM/k/I/G80/822/SR3 L10, Edge bander IMA
Type AVM/k/I/G80/822/SR3 L10
year of manufacture. 92
with return track
2 front router
infrared heater for preheating of the workpiece
glue roll – working with granulate glue – glue basin with pre heating funktion
clipping knife
pressure zone – 1 big pressure roll – 4 small pressure rolls
clipping saw
flush routing top and bottom
chamfer routing top and bottom
multi function device for copy routing
motor block can be equipped as needed (was use for groove routing, radius routing, routing of work tables and front pieces)
spoke shave top and bottom
polishing
with return rail
price on demand,
AD-ID: A393664
More Infos click here
___________________________________________________________________________________
Edgebander, OLIMPIC, MS, Machine length mm: 10.000; Premilling: Yes; Strip magazine: Yes; Trimming saw: Yes; Flush/radius/chamfer milling stations: 1; Sanding aggregate(s): Yes; Glue system granulate: Glue pot; Sound enclosure: Yes; Required space lxwxh: 10000xx; ,
AD-ID: A427616
More Infos click here
___________________________________________________________________________________
Kantenanleimmaschine, , Kantenanleimmaschine ME 20, , Kantenanleimmaschine NEW GLUE BASIN, 400V, edge strength of 0,4-3mm, workpiece strength of 10-45mm, Vorschubgeschw. 5m/min., number of revolutions drill 12,000 rpm., milling engine 370Watt, feed engine performance 180 W, suction nozzle 120mm, work temperature of 200 C, Top price
AD-ID: A250524
More Infos click here
___________________________________________________________________________________
Kantenanleimmaschine , Holz Her, 1410, , uses very good condition wood ago
type 1410 year of construction 1981 edge band thickness 25 mm edge
band height approx.. 55 mm cutting aggregate concise milling edge
loops autom. Edge magazine glue system: Cartridge acoustic enclosure
suction connection collective connection 160 mm of micro-adjustment
locally with the buyer necessarily space requirement approx.. LxBxH mm
of 4700 x 1000 x 1500 weight approx.. 1500 kg all data without
guarantee!
AD-ID: A424158
More Infos click here
___________________________________________________________________________________
Edgebander, BRANDT, KD 56, Edgeband thickness max mm: 3; Edgeband height max mm: 45; Thickness of coiled edgeband max mm: 3; Panel length min mm: 140; Workpiece width min mm: 60; Feed max m/min: 9; Machine length mm: 3.075; Compressed air pressure bar: 6; Extraction socket diameter mm: 100; Total connection kW: 3,80; Preheat,
AD-ID: A451744
More Infos click here
___________________________________________________________________________________
Edgebander, BRANDT, KD 93, Edgeband thickness max mm 20; Edgeband height max mm 55; Thickness of coiled edgeband max mm 3; Panel length min mm 160; Workpiece width min mm 65; Feed max m/min 16; Machine length mm 5.240; Compression bar 7; Total connection kW 10; Strip magazine Yes; Trimming saw Yes; Flush/radius/chamfer milli,
AD-ID: A252317
More Infos click here
___________________________________________________________________________________
Kantenanleimmaschine , Brandt / Homag, KE 13 / 20 / 50, , HR-REF-1548 kind of machine: Kantenanleimmaschine manufacturer: Brandt/Homag type: KE 13/20/50 year of construction: 1981 weight approx.: 1,200 kg Mass approx.: L (mm): 4,500 B (mm): 1,600 H (mm): 1.000 Technical data: - Workpiece thickness 10 - 55 mm - loops of massif wood edges of 0 22 mm - feed motion 7 - of 25 m/min - compressed air max,10 bar - sharpening aggregate - milling aggregate - Kappsaege - Quickmelt system Control: pneumatically/manually Condition: keep good price: 5.000, - euros net location: Region North-Rhine/Westphalia shipping equipment locally available dismantling, loading and transport are task of the Kaeufers. The trading firm Ravensberg organizes if necessary gladly the loading/transport of the commodity.
AD-ID: A335276
More Infos click here
___________________________________________________________________________________
single edge binder Bi-Matic MiniMaster 5.5, , , year 2003
condition nearly like new
maximum thickness of the wooden boards around. 55 mm
length of conveyor belt 3.600 mm
roller- support with a length of 4.250 mm
flor- space required: L x W = 4.510 x 1.500
,
AD-ID: A451930
More Infos click here
___________________________________________________________________________________
, Holzher, 1410, part Id-no. 2061985 year of construction 1982 machine model one-sided machine model unilateral width of work piece min. 60 mm length of work piece min. 140 mm height of work piece min-max 6-60 mm edge thickness min. max. 0,4-20 mm stop side left glue indication LEIMDÜSE gluing aggregate hot melt glue edge magazin roller 1 mm pressure zone straight snipping chamfer-straight flush milling 1 Anzahl pro Seite straight edge sanding 1 Anzahl pro Seite machine dimension without accessories length 5000 mm width 1000 mm height 1400 mm ,
AD-ID: A370524
More Infos click here
___________________________________________________________________________________
Kantenanleimmaschine , Brandt, KD 76, , tl ID. 2063187 one-sided kantenanleimmaschine
in on the right of execution for thermoplastic adhesive glueing edge
thickness 0.4 - 12 mm of workpiece thickness 10 - 55 mm workpiece
width min. 60 mm of workpiece length min. 160 mm feed motion approx..
11 m/min. Electrical connection 380 V - 3 pH. - 50 cycles per second
connected load approx.. 6 KW glue-hurry for thermoplastic adhesive
granulates glue supply below the glue role of indication of glue to
the workpiece by means of glue role, switchable for synchronisation
and Gegenlauf autom. Edge magazine for role material and fixed lengths
incl. strengthened Vorkappschere pressure zone with propelled main
feed roll as well as 3 running along reproduction roles central
adjustable oberdruck central manual chain course lubrication heated
intake ruler cutting aggregate chamfering/straight line for front and
rear edge projection of 2 engines ever 0.27 KW, 200 cycles per second,
12000 U/min. pulling cutting cut concise milling aggregate above and down with
vertical and horizontal palpation of 2 engines ever 0.55 KW, 200
cycles per second, 12000 U/min. Acoustic enclosure with collecting
suction nozzle Durchm. 120 mm of drawing blade profile above and down
with vertical and horizontal palpation, radius max. 3 mm of
Schwabbelaggregat above and down 2 engines ever 0.18 KW, tiltable
frequency changer 200 cycles per second of electrical exhaust brake
for cutting and concise of milling aggregates air connection 1/4, 6
bar of length 4200 mm broad 1300 mm height of 1600 mm weight 1250 kg
AD-ID: A370509
More Infos click here
___________________________________________________________________________________
, Brandt, F 13, Tl.-Id.2063183
For simultaneous upper and lower radius/flush-
milling of overhanging edge materials on straight
edges as well as cambered workpieces with
inside and outside radius.
Feeding with stopper rails for straight
edges and centric start-up rings for
sized parts.
Pneum. motor-spreading device for sized parts.
Fine adjustmen top and bottom.
Upper and lower milling motor pivoted tracingly
independently from each other.
milling works only allowed in counter direction!
Standard equipment:
- double-tracing rollers for straight workpieces
- single-tracing rollers for sized parts
- blowing-off device on top for milling chips
- static frequency transformer 200 Hz,
incl. motor braking
In case of voltage fluctuations bigger than +/- 10 %
a voltage stabilizer has to be built in on site.
Machine deliveries for EU-countries safety-related
equipped according to EC-rules 89/392/EWG, appendix I.
workpiece thickness (radius milling) about 16 - 55 mm
workpiece thickness (chamfer milling) about 12 - 55 mm
workpiece width min. about 30 mm
workpice width min. about 35 mm
inside radius min. about 35 mm
(depends on edge radius and
workpiece contour)
edge thickness max. about 3 mm
milling tool 2 x WPL-radius cutter r = 3 mm
diam.67 x 21 x 16 mm, t = 4
milling motors 2 x 0,35 kW, 11800 rpm
electrics 400 V - 3 Ph. - 50 Hz
electrical connected load 0,7 kW
pneumatic connection 5 bar
extraction 1 x diam. 80 mm
working height 900 mm
length 1250 mm width 850 mm
height 1500 mm
weight 250 kg,
AD-ID: A385974
More Infos click here
___________________________________________________________________________________
Edge processing machine , Fabr.: IMA:, Typ: Quadromat L 12 V, , Feed motion: approx. 18 m/min unchangeably edge thickness: max. 12 mm further details on request
AD-ID: A357229
More Infos click here
___________________________________________________________________________________
Edge bander with squaring part, OTT, K155-5/FU, Right handed edge bander with squaring device
Edges: 0,2 to 15 mm.
Panel sizes: width min. 60 mm., thickness 10 to 60 mm.
Panel feed by chain, feed speed 12 and 18 m/min, motor 4 kW
Top pressure with rollers, centralised height adjustment
Working height: 780 mm.
Equipment:
Fence rail
Squaring unit with 2 x 2,2 kW motors (200 Hz)
Hot melt unit with glue roller and quick heating glue tank, glue roller turning left and right
Edge magazine for coil edges up to 4 mm and strips
Lateral pressure rollers with 1 main and 3 small pressure rollers
End trimming unit K14 with 2 motors 0,8 kW, 200 Hz
Rough trimming unit HF15.1 with 2 motors 0,6 kW, 200 Hz
Fine trimming unit HF08.2 with 2 motors 0,6 kW, 200 Hz, for chamfer
Radius trimming unit HF08.2 with 2 motors 0,6 kW, 200 Hz
Profile scraping unit,
AD-ID: A418575
More Infos click here
___________________________________________________________________________________
Kantenanleimmaschine , IMA, Compact 809, , edge thickness (approx..): 0.4 mm - 0.9
mm of workpiece thickness: Max one. 50 mm of min. 10 mm of flow
velocity: 8-20m/min. Further data receive you on request!
AD-ID: A426862
More Infos click here
___________________________________________________________________________________
ELEVATION SKIRT, Kantenanleimmaschine, Typ AKV 83, , to Anleimen edges role-product
AD-ID: A226516
More Infos click here
___________________________________________________________________________________
KANTENANLEIMMASCHINE , HOLZ-HER, 1445 ACCORD, , with the following units: - edge injection - glue applicator station - print unit - Kappaggregat - Fräsaggregat - Nutaggregat - Kantenschleifaggregat - Schwabbelaggregat further technical data See appendix.
AD-ID: A427647
More Infos click here
___________________________________________________________________________________
Edge bander, Brandt, T 60, stock-no. 4686
Edge bander Brandt
type: T 60
year of manufacture: 1990
input power 12 kW
for preglued edge for inside and outside radius
pre clipping and glueing with heating nozzle
table size 1400 x 1000 mm
thickness of the workpiede 45 mm
thickness of the veneer edge 1,2 mm depending on the form of the workpiece
weight: 450 kg
price on demand
**********************
pozycja nr 4686
Okleiniarka krawedzi Brandt typ T60
rok 90
do krawedzi z naniesionym klejem do 1,2 mm
stol 1400 x 1000 mm
grubosc elementow obrabianych 45 mm
z dysza podgrzewajaca golna moc przylaczeniowa 12 kW
waga450 kg
,
AD-ID: A272074
More Infos click here
___________________________________________________________________________________
Kantenanleimmaschine, Holz-Her, 1435 MF C PVC Quick (18011), , uses make wood ago type 1435 MF C PVC Quick year of construction 1999 machines. - NR. 599-9-909 gs-wood-dust-examined edge band thickness CE-baumustergeprueft: up to 5 mm for strip commodity to 3 mm for role commodity edge band height max. 50 mm of caps of the role to 3 mm cutting aggregate concise/radius milling cartridge system space requirement approx. LxBxH mm of 3100 x 1400 x 1200 stock location 97447 Gerolzhofen all data without guarantee!
AD-ID: A314688
More Infos click here
___________________________________________________________________________________
panel sizing and edge banding machine, double side, IMA, Combima/K/II/R75/885/F/R3,
technical details:
right hand machine = fixed fence right side
max. edge thickness = approx. 3,0 mm
max. working width = 1.500 mm
electronic width adjustment
electronic top pressure hight adjustment
equipment each side:
- double hogging unit 75.34
2 motors each 5,5/8,0 kW, 6.000 UpM,
- air nozzle
- heater 300 mm long, 1,5 kW
for pre-heating the panel edge
- hot-melt gluing unit
*pre-melter Quickmelt
capacity 25 ltr.
*1 main pressure roll and 4 postpressure rollers Ø 80 mm
*6-coil-magazine with vertical coil receptacle
- end-trimming unit 08.41
2 motors each 400 W, 12.000 UpM,
- pre-milling unit 08.0555
2 motors each 1.850 W, 12.000 UpM
- air nozzle
- milling unit 08.055,
max. approx. 30 degrees swingable,
2 motors each 400 W, 12.000 UpM
- milling unit 08.055,
max. approx. 30 degrees swingable,
2 motors each 1.000 W, 12.000 UpM
- profile scraper unit 08.515
with chip-box
- buffing unit 08.285,
2 motors each 0,55 kW, 3.000 UpM
- smoothing unit, 08.53
with 1 top and 1 bottom smoothing zone
- lacquer-/ stain application unit 101.373
to colour the top and bottom chamfered workpiece edge
- lacquer-/ stain application unit 101.373
to colour the top and bottom chamfered workpiece edge
control: IMATRONIC-100
our stock-no.: 00 29778
,
AD-ID: A433831
More Infos click here
___________________________________________________________________________________
Kantenanleimmaschine , SCM, K 201 HF, , Melaminpapier, ABS, Furnierholzumleimer to 3mm, material of the role koennen to be up-glued, automatically one-sided, left-sided working machine for wooden plates or similar, 450 kg, rollable
AD-ID: A413833
More Infos click here
___________________________________________________________________________________
Kantenanleimmaschine, Hebrock, AKV 83 (16813), , uses, very good condition, year of
construction 1989, machine NR. 7772 Anleimen of pre-coated
thermoplastic adhesive edges up to 1.0 mm with edge milling cutter
inclusive. Complete equipment/option - arms reciprocally - final
cutting station - underframe mobile with door - extendable arm -
3-Rollen-Vorschubapparat
AD-ID: A246141
More Infos click here
___________________________________________________________________________________
Edgebander, HOMAG, KL 76, Edgeband thickness max mm: 20; Edgeband height max mm: 65; Thickness of coiled edgeband max mm: 3; Panel length min mm: 240; Workpiece width min mm: 55; Places in foil magazine: 2; Feed max m/min: 24; Stepless adjustable feed: Yes; Machine length mm: 7.755; Compressed air pressure bar: 7; Premillin,
AD-ID: A412590
More Infos click here
___________________________________________________________________________________
Edgebander, BRANDT, KDF 670, Edgeband thickness max mm: 12; Edgeband height max mm: 60; Thickness of coiled edgeband max mm: 3; Feed max m/min: 16; Machine length mm: 6.860; Compressed air pressure bar: 6; Extraction socket diameter mm: 100, 120, 200; Total connection kW: 16,00; Premilling: Yes; Strip magazine: Yes; Trimming s,
AD-ID: A436402
More Infos click here
___________________________________________________________________________________
Kantenanleimmaschine , BRANDT, KE 15, , massif up to 22 mm of caps mill radius-mill
schwabbeln stepless feed motion machine is in a very good condition
AD-ID: A423324
More Infos click here
___________________________________________________________________________________
Cutting aggregate LF 55 CKA , Homag, LF 55 CKA , , Cutting aggregate to Homag KR 33 type LF 55 CKA, Nr.170895, KW: 0.3 V: Y 165 Upm: 18000 A : 2.00 cycles per second: 300 NR: 4-075-01-0044
AD-ID: A440959
More Infos click here
___________________________________________________________________________________
Kantenanleimmaschine, IMA / Wilmsmeyer, ALM 110, , The machine is in a perfectly functioning condition, with the ueblichen customs traces. Control over operating panel (monitor) 6-Fach Rollenmagazin pre-milling Schwabbeln pre final cutting radius milling drawing blade chamfering milling integr. Exhaust of approx. 6 exchange aggregates role commodity to 5mm machinably Laenge of the machine: ca.13m assembly very fast, there all plug connectors loading no problem Pictures of the aggregates are sent in the appropriate order of the arrangement on request. possibly with Rueckfuehreinheit of the bulk which can be worked on (Foerderand, Querfoerderband) Spare parts are in the trade available The machine can be visited and tested after date arrangement at any time. Supply abroad moeglich location: Hanover (Laatzen)
AD-ID: A252106
More Infos click here
___________________________________________________________________________________
Corner copying aggregates on both sides (2x) , -, mit Perske Motoren, , 2 Eckenkopieraggregate for double-edge processing machine motors Perske 0.3 KW 200 - 400 Hz 10750-21100 rpm
AD-ID: A349230
More Infos click here
___________________________________________________________________________________
ima, IMA, AVM/K/I/G80/1265/R3 (5), , IMA edge processing machine year of construction 1996
one-sided IMA edge processing machine for formatting, forming,
Kantenanleimen and edge working over again of plattenfoermigen
workpieces. Technical data: Edge materials: Plastic strip, role
commodity min. Strip length = approx.. 300 mm of min. Strip height =
approx.. 14 mm of max. Strip thickness = approx.. 5.0 mm of thin edge
2 + 3 mm with copying; 5 mm only lengthwise. more firmly was pending
from the chain course = approx.. 30 mm of min. Work width = approx..
70 mm oberdruck with group drive belt (as 60 a mm as possible)
workpiece-stood from the chain course in processing of massif wooden
strips and Softformingprofilen. = 35 mm stood + max. border thickness
and/or max. Depth of profile AVM/I/G80/1265 ------------------------ Work height
920 mm of grundmaschine in the Zerspanerbereich bends to linksmaschine
= stop side on the left of kantenverleimung and rework with firm
0-Linie, was not pending from the chain course not variably. Main
drive with stepless, electronic speed regulation for feed speed =
workpiece transport. Feed speeds V = 7 - 35 m/min. (not to equate with
the gluing and operating speed). Broad continuous conveyor chain with
80 mm and are enough 60 mm for kettenplatten. Oberdruck over precision
guidance, hoehenverstellbar with a group drive belt 70 mm wide. Electronic vertical adjustment of the oberdrucks (one-sided) mains
voltage: 3 x 400 V + 5/- 10% 1 propelled diagonal roller race as
supply into the module system - with milaufendem side notice, by hand
over digital display laterally adjustably and bypass mechanism for
short, narrow workpieces. - drive infinitely variably, with digital
display by hand adjustably. 1 lateral notice ruler between roller race
and module system with smooth transition. To introduce cross stop at
the discharge of the inlet roller course crosswise to aligning
unfavorable construction unit formats e.g. 2700 x 170 1 module system
around workpieces lengthwise and angularly and parallel into the
machine, at the intake with lower introduction belts, thereafter
delivery to a vacuum table with same speed as the conveyor chain,
displaceable carriage into y-direction, achievement approx.. 18-20
clock/min. Min. Partial dimensions in run direction:
----------------------------------------------------------------- 90
mm of length with 600 mm broad 110 mm of length with 290 mm broad max.
Width 2700 mm of 1 indication of parting agent above, concerning
spraying nozzle mechanical digital display for lateral adjusting of
the workpiece strike. 1 milling aggregate for the edge
re-milling/calibrating formatted work pieces or for milling lateral
slots, creases or profiles, controllable, not tiltable, without
palpation, with 2 engines 3 KW, 133 V, 200 cycles per second, 12000
UpM. - without TC of milling tools 100 x 35 x 30; Z = 2 x 3 with 2
single exhaust hoods, with mechanical digital displays 09 for
horizontal and vertical adjusting. Doppelzerspaneraggregat with a
common, vertical adjustment for both Zerspaner; with a lower
Zerspaneraggregat around 200 mm to the machine intake transferred
installs. Indication of engine performance: 380 V, 100 cycles per second, 6000
UpM engine 3.0/4.4, KW, 50/100 cycles per second, KNS 70 horizontal
adjustment with mechanical digital display d.c. injection brake for 1
engine 3.3 - 4.4 KW, 100 cycles per second and an upper
Zerspaneraggregat. Engine 3.0 /4.4 KW, 50/100 cycles per second, KNS
70 motor shaft for the employment hydraulic format tool of the system.
Engines without tool. Horizontal adjustment with mechanical digital
display d.c. injection brake for 1 engine 3.3 - 4.4 KW, 100 cycles per
second of tool diameters 200 - 225 mm of single exhaust hood for the
Doppelzerspaner, stand back may not be occupied! - in special
equipment 1 milling aggregate 08. 376, for edge re-milling/calibrating formatted workpieces or for
milling lateral slots, creases or profiles, controllable, tiltable,
without palpation, with 2 engines 3 KW, 133 V, 200 cycles per second,
12000 UpM d.c. injection brakes for 2 engines 2 - 3 KW, 200 or 300
cycles per second - both engines in the synchronisation working 1
emitter 300 mm lg, 1, 5 KW for preheating the work do not piece-edge.
A) a basic gear equipped for pneumatic quick-locking mechanism. b)
Indication of thermoplastic adhesive glue with pneumatic quick-locking
mechanism Chem Coat coats, capacity 0.8 l with electronic temperature
control - with filling control of C) of strip control of light
conductor f) with an infrared emitter approx.. 250 mm long. To the
Nachaktivieren of the thermoplastic adhesive at the workpiece edge, g)
of a main feed roll. Electrical time switch clock with week program
for the glue container. 2-Rollen-Magazin only for role material to 3 mm thickly and 50 mm
highly, with automatic strip change. with strip wedging, with
strengthened separation measurer, with horizontal role admission for 2
roles, 1 automatic Quickmelt Schmelzkleberzufuehrung, over an intake
in melting pressing a cylinder space, with a level regulation for
order for thermoplastic adhesive the basin, deposit efficiency: - with
EH-FILLED adhesive approx.. 20 - 25 kg/h - with fuellstoffreien
adhesive approx.. 13-15 kg/h laterally ski ebbable and by hand
indexable. 1 additional indication of thermoplastic adhesive glue with
bayonet fixing, Chem Coat coated, capacity 0.8 l 1 cutting aggregate
08,41 to caps of the front and rear strip over of conditions, for
cutting cuts concisely or with one chamfers, horizontal by hand up to
25 degrees tiltable, laterally groping. 2 engines 400 W, 200 cycles
per second, 12000 UpM max. Edge height 50 mm of max. Edge thickness 20 mm, with 2 TC cutting saw blades 160 x 22 mm, Z 48,
min. 30 mm workpiece-stood + max. depth of profile (border strength),
min. Workpiece length: approx.. 90 mm, min. Distance from workpiece
front edge to workpiece front edge: 990 mm, min. Distance between 2
workpieces 300 mm, - to chamfering caps with thin edge under 15. - to
the Vorkappen with thick edge 2 + 3 mm under 15 with projection. - to
concise caps with thin edge, thick edge 2 + 3 mm under 15. - to
straight line caps with thick edge the 5 mm (engine turning manually).
1 milling aggregate 08,0555 for pre-milling from above and down, max.
approx. 3 degree tiltable (with workpiece thicknesses over 25 mm),
working with elevator palpation, without lateral palpation, with 2
engines 1000 W, 200 cycles per second, 12000 UpM, in the Gegenlauf,
one above the other arranged, for the fine milling from above and
down, groping 1 milling aggregate 08,0555 with elevator palpation,
laterally, with 2 engines 1000 W, 200 cycles per second, 12000 UpM, 1
multiple working on aggregate 08. 342 to the fine milling or profile milling of the upper longitudinal
fold as well as the front and rear edge, steered with height and side
palpation, feed motion horizontal and vertically by means of
servo-drive over SPS. Adjustment to the edge strength takes place
manually. Engine adjustment in Achs and radial direction takes place
manually, with 1 engine 500 W, 200 V, 300 cycles per second, 18000
UpM, with quick change mechanism, without tool, drive by means of
static frequency static frequency changer, with automatic brake
mechanism. Structure height 235 mm, min. 30 mm workpiece-stood + edge
strength, max. Edge projection at front/rear edge 10 mm, min. Distance
between 2 workpieces: approx.. 400 mm, max. Operating speed: approx..
20 m/min., min. Distance from workpiece front edge to workpiece front
edge: 990 mm, with horizon-old, motor positioning of the side
palpation for automatic program change (radius-chamfers) and for fine
adjustment. Roller tappet change for reequipping R2 on R3. Clamping device for the vertical stroke with parts with surface
profiles. 1 multiple working on aggregate 08,342 to the fine milling
or profile milling of the lower longitudinal fold as well as the front
and rear edge, steered with height and side palpation, feed motion
horizontal and vertically by means of servo-drive over SPS. Adjustment
to the edge strength takes place manually. Engine adjustment in Achs
and radial direction takes place manually, with 1 engine 500 W, 200 V,
300 cycles per second, 18000 UpM, with quick change mechanism, without
tool, drive by means of static frequency static frequency changer,
with automatic brake mechanism. Structure height 235 mm, min. 30 mm
workpiece-stood + edge strength, max. Edge projection at front/rear
edge 10 mm, min. Distance between 2 workpieces: approx.. 400 mm, max.
Operating speed: approx.. 20 m/min., min. Distance from workpiece
front edge to workpiece front edge: 990 mm, 1 profile drawing blade
equipment 08. 515, to the Nachschaben of an upper and a lower milled quarter circle
profile with up-glued PVC edge materials, osziliierend with elevator
palpation, 1 Kopiereckenschwabbel Kompakteinheit WI for polishing by
the copying milling engines 1 the Schwabbelaggregat 08,285, for
polishing an upper and a lower milled profile with up-glued PVC edge
materials, 1 Schwabbelaggregat 08,285, 4 engines of the
Schwabbelaggregate 08.285.
AD-ID: A306411
More Infos click here
___________________________________________________________________________________
Edge Banding Machine with Joint Trimming Unit, HOLZ HER, Triathlon 1487 V, egde thickness 0,4 - 20 mm; workpiece thickness 6 - 60 mm; joint trimming unit 1961 (2 x 2,0 KW); gluing unit 1901 / 1906 / 1926K; end trimming unit 1918MF (2 x 0,35 KW); rough trimming unit 1920 (2 x 1,1 KW); copy milling unit 1934 & 1933 (4 x 0,45 KW); flat scraping 1964; profile scraping 1929; edge buffing unit 1944K (2 x 0,2 KW)
Contact person:
Ludger Reuther
Uli Stalter,
AD-ID: A419696
More Infos click here
___________________________________________________________________________________
Format working on and kantenanleimmaschine , Homag, KF62/12/A/25/II+500, , work width on both
sides min. 220 - 280 mm, work width on both sides max. 2,500 mm, work
height 905 mm, workpiece thickness 8 - standard milling aggregate
pneumatics control 4.5 KW, milling stand 900 mm of 2 guidance,
Doppelzerspaner aggregate 2 x 6.6 KW, thermoplastic adhesive glue
aggregate 10 l, magazine HL 21, role change mechanism 2 x 3.5 mm,
pressure zone C, cutting aggregate HL 02, pre-milling aggregate above
and down 0.6 KW, multi-milling aggregate MF10 above/down, form milling
aggregate down 0.3 KW, change mechanism routing, radius/chamfers form
milling aggregate above 0.3 KW, change mechanism routing
radius/chamfers 60 mm, rolling conveyor chain, multi-after finery
mechanism /unten above, Eckenschwabbelaggregat, chamfering aggregate
above and down with oscillation,
AD-ID: A346623
More Infos click here
___________________________________________________________________________________
edge banding machine, Brandt, KTV 51, our stock-no.: 01 13551,
AD-ID: A281343
More Infos click here
___________________________________________________________________________________
Kantenanleimmaschine , NEY, KDP 106, , Ney kantenanleimmaschine
AD-ID: A432653
More Infos click here
___________________________________________________________________________________
Edgebander for pre-coated edges, VIRUTEX, EB 15, Panel thickness max mm: 65; Machine length mm: 1.000; Total connection kW: 2,20; Weight kg: 77; Feed max m/min: 4,5; Cutting knife: Yes; Cutting made to measure: Yes; Required space lxwxh: 1000x700x1000; ,
AD-ID: A419708
More Infos click here
___________________________________________________________________________________
Brandt Kantenanleimmaschine KTV 51 , Brandt , KTV 51, , for pre-coated edge Digital edge length preselection Role plate 800 mm Cutting auxiliary facility for Rundumbeleimung Technical data: Workpiece thickness: 10 60 mm min. approx. 25 mm of edge thickness 0,5 1.0 mm Internal radius of min. 25 mm feed motion 2 9 m/min. Connected load 6.3 KW of electrical connection 380 V, 50 cycles per second, 3 pH work height 850 mm
AD-ID: A327245
More Infos click here
___________________________________________________________________________________
Edge Banding Machine, HOMAG, KL 77, egde thickness 0,4 - 12 mm; workpiece thickness 7 - 60 mm; feed 10 - 30 m/min; gluing unit HL21 / C; end trimming unit 2 x 0,6 KW; rough trimming unit 2 x 0,6 KW; profile milling unit 2 x 0,3 KW; copy milling unit 4 x 0,3 KW; sanding unit KS10; profile scraping; edge buffing unit 2 x 0,25 KW
Contact person:
Ludger Reuther
Uli Stalter,
AD-ID: A434508
More Infos click here
___________________________________________________________________________________
Blaich edgebander MOKV, Blaich, Blaich MOKV, Blaich edgebander, factory reconditioned May 2008 (as new)
-edging from 0.8 - 18mm
-trims flush, rounds or chamfers
-vertikal panel infeed (space saving! machine depth only 70cm!)
-1 year warranty
-made in Germany for over 40 years!
-please contact me via email, will call you back a.s.a.p
-photos of the machine are also availbale ,
AD-ID: A444685
More Infos click here
___________________________________________________________________________________
Ney Kantenanleimmaschine type junior, Ney, Junior, , technical data: Equipment: -
machine for pre-coated edge - role cap mechanism up to 2 mm - pressure
zone -4 pressure roll - cutting measurer - HF Buendigfraesaggregat
down and above with palpation - approx.. 0.5 KW of machine length 3000
mm feed unit Ney workpiece thickness 10-40 mm with Abauggeraet
AD-ID: A281606
More Infos click here
___________________________________________________________________________________
Edge trimming machine, LANGE, B 60, Workpiece width min mm: 30; Workpiece thickness max mm: 55; Edge thickness max mm: 3; Inner radius min mm: 50; Total connection kW: 2,00; Weight kg: 200; Radius milling: Yes; Flush milling: Yes; For mouldings: Yes; Cutting aggregate: Yes; Feed: Manually; Required space lxwxh: 1000x750x1250; ,
AD-ID: A438114
More Infos click here
___________________________________________________________________________________
Wood ago kantenanleimmaschine Model 1310-1 , Holz-Her , 1310-1, , - Edge strength strip commodity: 0,4 (with structure of printing element 1816 - edge strength role commodity: 0,4 - - edge height: max. 51 mm - plate thickness: 6 - 45 mm of feed speed: 11 m/min. And lubricators (manual) with centraladjustable printing bridge with safety hood with rigid Werkstueckauflaqe with central connection for exhaust milling aggregate Durchm reequip SPS program control for rational setting-up with obenliegendem rigid control console with conveyor chain with central EN. 70 mm) with central connection for exhaust, drawing blade Durchm. 70 mm) with electrical contact floating for exhaust with frequency changer 300 cycles per second statically (400 v, 50 H z. ) 3mm edge strength max. 5 mm) of 3 mm (material-dependent) Equipped with: - Edge supply 1903, before caps to 3 mm, rolling and strip commodity, max. loading capacity: 40 mm of feed tables Durchm. 820 mm - Order for adhesive 1906M cartridge (1.9 KW, 50 cycles per second. ) no automatic reloading, magazine capacity: 1 cartridge (C A. 330 g R.) - printing element 1912, 1st role propelled, 1 reproduction role cutting aggregate 1918 (2 x 0.22 KW, 300 H z. , 9,000 u/m i n. ), tiltable 0 10 degrees, mcl. 2 TC change tooth of circular saw blades, Durchm. 110 mm, z 20 - multi-function milling aggregate 1942 (2 x 0.6 KW, 300 cycles per second., 18,000 rpm. Concisely to 3.mm, radius = 3 mm, chamfers 0 15 degrees tiltable, mcl. Milling tool, mcl. Digital counter, without Blasduese - scholarship for drawing blade aggregate 1929 - scholarship for Schwabbelaggregat 1940 or surface drawing blade 1964 equips with: Printing element 1816 Multifuntionsfraesaggregat 1942 M MOT 2 drawing blade aggregate 1929 surface drawing blade 1964 extendable workpiece edition - automatic glue hearing adjustment (groping Duese) - pneumatic Verstellunq for Kappaqgreqat 1918 - Blasduese for Fraesaqqreqat 1942 M - splinter catch box for drawing blade aggregate 1929 pneumatics package (above and down qetrennt) for milling aggregate 1942 M and drawing blade aggregate 1929 Deviating one technical equipment remains reserving. Further information give you gladly our coworkers in the selling.
AD-ID: A432284
More Infos click here
___________________________________________________________________________________
Kantenanleimmaschine , LMB, B46, , kantenanleimmaschine LMB type B46
for straight, round and irregularly formed workpieces with outside and
internal radius of workpiece thickness 8 55mm edge thickness 0.4 1,0mm
total connection 3,1kW year of construction 2002
AD-ID: A397688
More Infos click here
___________________________________________________________________________________
Kantenanleimmaschine, Homag, KL 34 D (16810), , uses, good condition, year of
construction 1975, machine NR. re-tooled, feed motion steplessly,
automatic edge magazine, cutting shears strengthened 34568 for ABS
edges to 3 mm and massif edge band, heatable intake ruler, concise
caps, concise milling, radius milling, sharpening aggregate - surface
radius drawing blade -
AD-ID: A246139
More Infos click here
___________________________________________________________________________________
universal edge banding machine, Hebrock, AKV 88 F, technical details:
Edge banding machine for banding pre-coated edge material at contoured workpieces or at straight workpieces.
Workpiece guide and ?feed is manual.
Hot melt reactivation via hot air blower.
workpiece thickness min.: 10 mm
workpiece thickness max.: 50 mm
edge thickness max.: 2 mm
coil material Ø max.: 560 mm
workpiece length min.: 240 mm
workpiece width min.: 60 mm
working table width: 325 mm + extendable
workpiece support 300 mm
edge material overhang, top and bottom: approx. 2,5 mm
min. workpiece internal radius: approx. 28 mm
working table height: approx. 865 mm
edge material infeed speed: stepless 0 ? 6 m/min.
cutting knife: edge length digital adjustable
power hot air blower: 3.000 W
dimensions (L x W x H):
1.900 mm x 1.200 mm x 1.200 mm
article-no.: 0029524,
AD-ID: A244386
More Infos click here
___________________________________________________________________________________
edge banding machine, single sided, IMA, AVM/K/I/G80/965/R3(4), technical details:
feed speed V = 6 - 30 m/min.
jointing unit
hot melt gluing unit
12-coil-magazine for coil material up to 3 mm thickness and 50 mm hight
end trimming unit milling unit milling unit milling unit contour trimming unit
contour trimming unit groove/rebate/profile milling unit
profile scraper
self-tracing scraping unit
smoothing unit
electronic line control
PZP - small-control Imatronic
article-no.: 0029571,
AD-ID: A244395
More Infos click here
___________________________________________________________________________________
softforming edge banding machine, single sided, Homag, KFL 53/36/H/QE, technical details
fixed fence: left side
rolling chain
- infeed fence
- free space approx. 400 mm
- trimming unit
1 motor 3 kW, 300 cycles, 18.000 U/min.
swingable 10 degrees
autom. 8-fold revolver
- trimming unit
1 motor 3 kW, 300 cycles, 18.000 U/min.
swingable 10 degrees
autom. 8-fold revolver
- panel pre-heating up to 45 mm panel thickness
- hot melt gluing unit - magazine HL 23 – stripe magazine
edge thickness approx. = 0,4 - 20 mm
edge width approx. = 16 - 65 mm
for max. 2.500 mm long lippings
- coil end trim knife for single coil 3,5 mm
edge thickness max. 3,5 mm
edge width max. 65 mm
- edge pre-heating, pattern side
- pressure zone
1 main pressure roll, driven, diam. 200 mm
12 postpressure rollers, diam. 80 mm
lateral motorised moveable
12 postpressure rollers, bottom
for positioning the lippings
- end trim unit lippings
2 motors each 1 kW, 300 cycles, 18000 U/min.
edge thickness straight max. 20 mm
edge width max 65 mm
- trimming column
2 motors each 2,2 kW, 100 cycles, 6.000 U/min.
- trimming unit
1 motor 4,5 kW, 100 cycles, 6.000 U/min.
swingable 90 degrees
- trimming unit
1 motor 4,5 kW, 100 cycles, 6.000 U/min.
swingable 90 degrees
- profile milling unit top and bottom
2 motors each 2,2 kW, 300 cycles, 18.000 U/min.
- motorised lateral adjustment of unit beam
- application unit lacquer/stain top/bottom
- softforming gluing unit
- magazine HL 20
edge thickness approx. = 0,4 - 6 mm
edge width approx. = 16 - 65 mm
- magazine HL 10 – 2 coils 1,5 kW
edge thickness approx. = 0,4 – 1,5 mm
edge width approx. = 16 - 65 mm
- coil end trim knife for single coil 1,5 mm
edge thickness max. 1,5 mm
edge width max. 65 mm
coil diam. max. 600 mm
- lubrication unit
for driven pressure roller with anti-stick solvent
- edge pre-heating, pattern side
- multiple pressure zone 6-fold
for softforming profiles
- profile pressure roller set fixed at top
- end trim unit softforming
2 motors each 0,4 kW, 300 cycles, 18000 U/min.
edge thickness straight max. 6 mm
edge width max 65 mm
- motorised lateral adjustment of unit beam
- pre-milling unit 1,5 kW, 300 cycles, 18000 U/min.,
- free space approx. 650 mm
- milling unit top and bottom 0,6 kW
2 motors each 0,6 kW, 300 cycles, 18000 U/min.
swingable 0-30 degrees
- milling unit top and bottom 0,6 kW
2 motors each 0,6 kW, 300 cycles, 18000 U/min.
swingable 0-30 degrees
- profile trimming unit bottom
for cross processing of softforming pieces and for contour trimming leading- and trailing edge bottom
2 motors each 0,3 kW, 300 cycles, 18000 1/min.
- motorised lateral adjustment of unit beam
- profile trimming unit top
for cross processing of softforming pieces and for contour trimming leading- and trailing edge top
2 motors each 0,3 kW, 300 cycles, 18000 1/min.
- anti-stick solvent applicator
- buffing unit top + bottom with oscillation
6 motors each 0,18 kW, 220/380 V, 50 cycles, 1.500 U/min.
- belt sanding unit
for sanding straight edges
- chamfer belt sanding unit 45 degrees bottom
- chamfer belt sanding unit 45 degrees top
- buffing unit top and bottom, oscillating
2 motors each 0,25 kW
- Homatic – production line control NC 50
article-no.: 0029589,
AD-ID: A244423
More Infos click here
___________________________________________________________________________________
edge bander, Holz-Her, 1434 Express (19248), used
manufactured by Holz-Her
type 1434 Express
built in 1991
mach.-No. 186/9-610
cleaned, function checked,
test run with glueing,
GS-approved
edge band thickness 0.3 - 5 mm
edge band height 51 mm
trimming from der roll to 3 mm
end-trimming aggregate
flush/bevel/radius cutting
with change aggregate
buffing
autom. edge magazine
feed speed ca. 11 m/min.
glue system cartridge
protective hood
large roller table
exhaust connection 100 mm
required space ca. l x w x h mm
3,700 x 1,200 x 1,650
weight ca. 1,000 kg
located in 97447 Gerolzhofen
No responsibility is taken for the correctness of this information!
,
AD-ID: A404211
More Infos click here
___________________________________________________________________________________
Kantenanleimmaschine , Sudhoff, K 70, , HR-REF-2127 kind of machine: Kantenanleimmaschine manufacturer: Sudhoff type: K 70 year of construction: 1996 weight approx.: 800 kg of measures approx.: L (mm): 3,000 B (mm): 1,000 H (mm): 1.400 technical data: - Workpiece width min.55 mm - workpiece thickness min 6 mm - workpiece thickness max. 55 mm - edge thickness of max,5 mm - chain feed motion - high-speed heating basins - 3 feed rolls - edge magazine - HF - cutting saw - station - HF Buendig - radius milling station - tiltable engines - acoustic enclosure Condition: immediately operationally Price: 4.800, - euros net location: North-Rhine/Westphalia availability off: immediately shipping equipment locally: available The trading firm Ravensberg is a machine broker. They buy machines directly with us from the owner. Fuer buyers do not develop commissions. When desired we organize machine transport. Mistakes in the offer remain reserving.
AD-ID: A441232
More Infos click here
___________________________________________________________________________________
OTT S 40 S , OTT, S 40 S, , manufacturers: Ott type: S 40 S weight approx.:
2,200 kg of mass approx.: L (mm): 4,500 B (mm): 1,000 H (mm): 1.400
technical data: - Anleimen - caps x - 2 x concise milling
(superimposedly, next to one another) - veneer -, massif wood and
plastic edges - max. 20 mm of massif edge strength - round glue basins
for fusion sticking glueing - Durchlaufgeschw. 20 m/min. - 60 mm glue
height - 80 mm of min. Workpiece width operating voltage: 380 V
equipment: - autom. Edge magazine for strip edges - autom.
Rollenmagazin with pneumatic cut-off press appliance three-phase
alternating current frequency changer: 8.0 KVA, 200/300 cycles per
second. Stepless vorschubmotor technical information: available
condition: well and ready for use
AD-ID: A422242
More Infos click here
___________________________________________________________________________________
Kantenanleimmaschine , HOLZHER, 1433 CP Quick, , Typ.1433 CP Quick, with cartridge system, built 1995, Anleimerdicke to 5mm, Kappaggregat Flush, Radius milling, roles excerpt as Tichverbreiterung.
AD-ID: A407069
More Infos click here
___________________________________________________________________________________
edge banding machine, IMA, Combima/K/I/G80/972/F/R, fixed fence: left hand
edge material: coil material
max. edge thickness = approx. 1,3 mm
max. edge height = approx. 50 mm
feed speed V = 7 - 35 m/min.
workpiece infeed and alignment device
trimming unit
1 motor 3,3 kW, 380 V, 100 cycles, 6.000 UpM
double hogging unit
2 motors each 3,3 kW, 380 V, 100 cycles, 6.000 UpM
free space approx. 300 mm
gluing unit with:
- hot melt gluing unit
- 1 main roll, 2 pressure rollers diam. 80 mm
- pre-melter, capacity approx. 25 litre,
- 32-coil-magazine, for coil material up to 1,5 mm thickness
end-trimming unit 08.41
in special device for workpieces with dowels,
2 motors each 150 W, 133 V, 200 cycles, 12.000 UpM,
end-trimming unit 08.41
in special device for workpieces with dowels,
2 motors each 150 W, 133 V, 200 cycles, 12.000 UpM,
milling unit 08.055 for fine milling,
2 motors each 400 W, 133 V, 200 cycles, 12.000 UpM
milling unit 08.055 for fine milling,
2 motors each 400 W, 133 V, 200 cycles, 12.000 UpM
self-tracing scraping unit 08.50,
PZP – control for the
Imatronic – control system
outfeed device
our stock-no.: 00 29531,
AD-ID: A258386
More Infos click here
___________________________________________________________________________________
panel sizing edge banding machine, IMA, Combima/K/II/520/F/R, processing in longitudinal and cross device
max. working width approx. 2.500 mm
transport chain with dogs, distance 540 mm
workpiece magazine
machine control: Luma , type 5000
equipment left and right machine side
-------------------------------------
trimming unit
controllable, swingable,
with 1 motor 4,4 kW, 380 V, 100 cycles, 6.000 U/min,
double hogger unit
with 2 motors á 4,4 kW, 380 V, 100 cycles, 6.000 U/min
hot-melt gluing unit
1 main roll
2 additional rollers, diameter 80 mm
2-fold coil magazine,
only for coil material up to 1,5 mm thickness,
end-trimming unit 08.41, straight + chamfer
with 2 motors à 150 W, 133 V, 200 cycles, 12.000 U/min.,
remark: only for the leading edge
end-trimming 08.0493, straight + chamfer
with 2 motors á 220 W, 300 cycles, 133 V, 12.000 U/min.,
remark: only for the trailing edge
pre-milling unit
tracing from top, bottom and lateral,
2 motors each 400 W, 133 V, 200 cycles, 12.000 U/min
25 degrees swingable
fine milling unit
tracing from top, bottom and lateral,
2 motors each 220 W, 133 V, 200 cycles, 12.000 U/min
buffing unit,
swingable, oscillating,
with 2 motors each 0,25 kW 220/380 V, 50 cycles, 3.000 U/min
outfeed device
our stock-no.: 00 29639,
AD-ID: A258390
More Infos click here
___________________________________________________________________________________
Kantenanleimmaschine , Ott, S10, , S Ott edgebander 10 Model S 10 caps, milling, grinding. 3
AD-ID: A363277
More Infos click here
___________________________________________________________________________________
Edgebander, HOLZHER, SPRINT 1315-1, Edgeband thickness max mm 5; Edgeband height max mm 51; Thickness of coiled edgeband max mm 3; Panel length min mm 180; Workpiece width min mm 60; Feed max m/min 8; Machine length mm 4.450; Compressed air pressure bar 6; operating hours read 3.952; Strip magazine Yes; Trimming saw Yes; Flush/radius,
AD-ID: A391268
More Infos click here
___________________________________________________________________________________
Kantenanleimmaschine , Fabr. Homag, Typ: KL 75/A/S27 D, , 2 x Fuegefraesen Vorkappen Kanteanleimen up to 1 mm lateral caps pre-milling + fine milling Schwabbeln sound hoods
AD-ID: A357510
More Infos click here
___________________________________________________________________________________
Kantenanleimmaschine , Fabr.: Brandt, Typ: T 55, , The machine is intended for pre-coated edge material
AD-ID: A357511
More Infos click here
___________________________________________________________________________________
Edge edge band , Holzher , 1356, , HR-REF-1937 kind of machine: Kantenanleimmaschine manufacturer: Wood ago type: 1356 year of construction: 1972 weight approx.: 700 kg of mass approx.: L (mm): 2,970 B (mm): 1,000 H (mm): 1.390 technical data: - Anleimen - concise milling - Funier, massif wood, plastic edges - max.20 mm of massif edge strength - feed motion 10/13/16 m/min. - Compressed air connection 6 bar - Elektroanschluss 380V/50 cycles per second - electrical connected load 10 KW condition: - maintained - perfect total condition price: 1.480, - net location: Region Hessen Verfuegbarkeit off: immediately shipping equipment locally: available Dismantling, loading and transport are task of the buyer. The trading firm Ravensberg organizes if necessary gladly the loading/transport of the commodity. The trading firm Ravensberg is a broker and not owner of the offered commodity. All information is based on the data of the owner. Mistakes remain reserving.
AD-ID: A387280
More Infos click here
___________________________________________________________________________________
Edgebander, BIESSE EDGE, STREAM B1, Edgeband thickness max mm: 20; Edgeband height max mm: 65; Thickness of coiled edgeband max mm: 3; Panel length min mm: 100; Workpiece width min mm: 55; Tool changing positions: 3; Feed max m/min: 24; Stepless adjustable feed: Yes; Compressed air pressure bar: 6; Premilling: Yes; Trimming saw: Yes;,
AD-ID: A429912
More Infos click here
___________________________________________________________________________________
Kantenanleimmaschine , IMA, Compakt 820 V mit Fuegen , , adding milling Anleimen even caps
pre-milling fine milling radius milling flat drawing blade profile
drawing blade Schwabbeln
AD-ID: A343252
More Infos click here
___________________________________________________________________________________
edge processing machine, 1 1/2-fold, IMA, Combima, Panel sizing part with double sided transport chain track.
Unit equipment only single sided.
- milling unit
- double hogger unit
- grooving unit
- gluing unit with double coil magazine up to 3 mm edge thickness
- end-trimming unit
- flush milling unit
- multiple milling unit
- free space 900 mm
- grooving unit
- profile scraper
- flat scraper
- 2 x buffing unit
- smoothing unit
- control: IMATRONIC PZP
stock.-no.: 00 29719,
AD-ID: A327556
More Infos click here
___________________________________________________________________________________
, Homag, KFL10/21/Q , Tl.-Id. 2069713
Short text
----------
Technical Data:
- egde thickness: 0,4 - 3,5 mm
- workpiece thickness: 8 - 60 mm
- joint trimming unit: 2 x 2,2 KW
- feed: 10 - 40 m/min
- gluing unit: QA34
- end trimming unit: HL04 (2 x 0,23 KW)
- rough trimming unit: 2 x 0,6 KW
- copy milling unit: FK03
- uni milling unit: 2 x 4,5 KW
- flat scraping
- profile scraping
- edge buffing unit
- single-sided and flexible Homag edge banding machine for
production batch 1, fixed stop on the left side,
WZ10 parts infeed system, edge roller magazin 12-fold & 6-fold,
2 x trimming units: each 4,5 KW, incl. material handing over- and
one turn system, control: NC30
,
AD-ID: A448430