Saw band sharpening machine , Vollmer - Dornhahn, BN 30 TS, , with Kuehlmitteleirichtung
suitably for bimetal - and wood saw bands starting from extent 2 m AD-ID: A424266 More Infos click here
Grinder , WIDMA, HKS 800, , Technical data: Smallest sawing 100mm of largest ones sawing 800mm sheet thickness max. 10mm tooth pitch of 7 to 100mm face angles from -15 to + 45 motor adjustable setting angles from +3 to +45 motor adjustable Schraegungswinkel 3 to 45 steplessly adjustable grinding wheel outside 100 or 125mm Drilling 25mm Extent speed of 19 or 24 m/sec power connection 220/380 V, 3 phases 50 cycles per second total connected load approx. 1.5 KW of lacquer finish ral 6011 green space requirement 180x130x220cm weight approx. 650 kg AD-ID: A439862 More Infos click here
Sharpening machine , Klein & Soehne, , , Hacker measurer - grinding machine Schleiflaenge of max 800 mm swivel table 0-90 degrees feed motion automatically sharpening engine tiltable pot disk AD-ID: A430188 More Infos click here
Sharpening machine , WERKÖ, SWU200, , for sharpening cutter and Hobelköpfe Werkö SWU200 Fabrikations-Nr.535/66 total mass: 0.75 t/750kg Freqünz: 50Hz operating voltage: 380V Steürspannung: 220V rating: 0.9 kw nominal power of the machine: 2.5 A AD-ID: A397561 More Infos click here
Sharpening machines from sharp area , WIDMA, LOROCH, IDEAL..., , , Loroch sawingsharply
automat JLW SW machines Nr.31278 year of construction 1973 circular
saws admission largely 100,450 mmAufnahme small 50,300 mm of zahnweite
up to 25 mm of depth of teeth up to 8 mm lateral chamfering angles 45
sheet strengths up to 8 mm with some spare disks WIDMA MKS 1
sawingsharply automat for CV and HSS of saws make WIDMA type MKS I/II
year of construction approx. 1985 control type conventionally saw
blade diameter 400 mm of tooth pitch 0.5-15 mm of feed speed 3 stages
total output need 0.6 KW with some spare disks IDEAL belt saw welding
set type BSO to welding wood belt saws metallbandsaegen of bimetal
saws range up to 16 mm of tension 220 V, 50/60 cycles per second of 9
Amp RH UTENSILEGNO sawing chain sharpening machine and some grinding
wheels freely transport costs Germany AD-ID: A381404 More Infos click here
Plane measurer sharpening machine, Widmann, MFS1 (17787), , uses make Widmann type MFS1 year of construction 1970 machines. - No. 2741 work width approx. 710 mm 0.55 KW stock location 97447 Gerolzhofen all data without guarantee! AD-ID: A298810 More Infos click here
Sharpening machine for Circular- an Bandsaws, Loroch, B50, ,
suitably to sharpen from CV circular saws to 600mm DM, pointed and
wolf tooth as well as belt saws to 60mm broad (also Woodmizer).
Completely with operating instructions, ersatzteilverzeichnis and
machine stand. Different tooth profiles possible. Overhauled
completely, transmissions again. AD-ID: A319741 More Infos click here
Fully automatic sharpening machine Chain saws, Loroch, SSM, , suitably to sharpen from plane inverted-tooth chains with divisions
of 1/4 " until 1/2 " and driving member strengths
1,3/1,6/2,0mm. automatic recognition of the schneidezaehne, automatic
direction of rotation change of the grinding wheel. Air requirement
6bar, 10l/min, 400V/3/50Hz. The machine is overhauled completely and
is technical and optical in perfect condition. 6 months warranty AD-ID: A319742 More Infos click here
Gang saw automat machine, Vollmer Dornhan, Liliput Junior, , Sharpening machine for CV-circular saws to 650mm DM, pointed and wolf tooth (adjustable). When desired with Bandsaegenfuehrung to sharpen from belt saws. The machine is used and in good condition. AD-ID: A250167 More Infos click here
Tool grinding machine, KUHLMANN, FSM 2-H, Tool diameter max mm 450; Sanding stroke 240; Tool length max mm 430; Tooth pitch min mm 2; Tooth pitch max mm 24; Main motor kW 0,52; Weight kg 445; Hobelköpfe Yes; Milling tools Yes; Required space lxwxh 1400x800; Availablity Short-term, ex location customer!; In offer since 03-12-07; Condition U, AD-ID: A391118 More Infos click here
Carbide tipping machine, ISELI, SWW R, For circular saw blades Yes; For band saw blades Yes; Round stellite Yes; Shaped stellite Yes; Verfahren Resistance method; Control Automatic procedure; Einschweißen Vertical; Ex price aprx. EURO 75.000; Availablity Short-term, ex location customer!; In offer since 17-07-07; Condition Unchecked; An, AD-ID: A351618 More Infos click here
Plane measurer sharpening machine , Weinig, Rondomat 930, , for sharpening degrees
and profile measurers for the planing maschines AD-ID: A422285 More Infos click here
Crack crowns Bandsägenschärfmaschine , Risstaler, 250MT-B, , Bandsägenschärfmaschine Type: 250MT-B Built in 1994 with help feed with requirements for band saw blades AD-ID: A448049 More Infos click here
Sharp automat , Vollmer, CNE, , with 200 mm of grinding wheel for saw blades up
to 1000 mm, Grade-und diagonal cross section, pictures can be
requested by Mail AD-ID: A411981 More Infos click here
Profile sharpening machine , Weinig, Rondamat R 930, , Profile measurer grinding machine (manual) Description: Been suitable to manual regrinding and forming of profile measurers and deflectors by means of template. Technical data: Grinding wheel diameter upto max. 225 mm, grinding wheel width max. 5 mm, grinding wheel drilling diameter 60 mm, max. tool tools 300 mm, smallest tool tools 100 mm, max. tool tools 230 mm, grinding wheel drive 1,1 KW, grinding wheel engine speed 1420 rpm., rotary arbor numbers of revolutions 1720/2000/2500/2820 rpm., setting angles: radially (Rueckenfreiwinkel) 10 to 30, axially (laterally) 0 to 20, contents of Kuehlmittelbehaelter approx. 100 l, connected load 1,5 KW (400 V/50 cycles per second), weight approx. 800 kg, dimensions B x T x H = 1100 x 1080 x 1650 mm, color green ral 6011. AD-ID: A374229 More Infos click here
Profile grinding , Weinig, Rondamat 960, , WEINIG KNIVES - PROFILSCHLEIFMASCHINE RONDAMAT 960 Built in 1999 machine-No. Technical High-knife grinder to: sharpening and manufacture of knives profile of a full Blankett According to a stencil straight Hobelmessern sharpening knives in the head. The grinding of Hobelmesser in Hobelkopf with the usual knife overhang is possible. Equipment: Tool width max. 240 mm tool flight circle m [...Technical data truncated] AD-ID: A453296 More Infos click here
Profile sharpening machine, WADKIN, VISAGE, "WADKIN" mod. VISAGE PROFILE and GRINDING CENTRE
NEW MACHINE, NEVER USED
Main technical data :
Max. cutting length :
Hydrolock mm. 335
Mechanical mm. 315
Max. depth of profile mm. 40
Maximum cutting circle
profiling mm. 300
Straight knife mm. 350
Minimum cutting circle mm. 70
Worklamp Halogen 20w
Spindle speed 3000 giri/min.
Motors power :
Grinding spindle 1,5 kW (2 HP)
Coolant pump 0,15 kW (O,2 HP)
Coolant system tank capacity min. 18 - max. 36 litri., AD-ID: A406386 More Infos click here
