Optimising crosscut, JOSTING, FAT, Optimum veneer yield with automatic crosscutting
Measuring table with movable cross-laser,
automatic cutting machine with feedbelt
length of knive: 86 cm
with extra knive, AD-ID: A491481 More Infos click here
Veneer Press, BÜRKLE, S 4, Number of cylinders 6; Number of levels 2; Platen length mm 2.550; Platen width mm 1.330; Heating top/bottom seperately Yes; Heating platens Electric; Presskraft Electro-hydraulic; Ausführung Upstroking press; Availablity Short-term, ex location customer!; In offer since 24-07-07; Condition Uncheck, AD-ID: A352099 More Infos click here
veneer glueing machine, KUPER, Typ FW 630, built ~ 1990, with glue thread, passage 630 mm, with foot switch, good condition.... now for only , AD-ID: A281679 More Infos click here
Veneer different roles, , Sorte U036 Mittelgrau und U0120, , see photo 1 range with 3 pieces rolls 900 mm wide (U036) and 1 pallet with 3 pieces roles 1300 mm (U036) and 1 piece of roll 1300 mm U120 AD-ID: A271758 More Infos click here
Veneer composition machine , Fisher + Rueckle, FL 728, , Veneer composition machine Fabr. Fisher + Rueckle, type flat steel bar 728 inclusive filling system tie-clip by type FSB-DS 295 and accessories veneer milling cutter and Beleimung Fabr. Hofer Price on request AD-ID: A443075 More Infos click here
Veneer tape machine , KUPER, FWJ 900, , Ständerausladung 920 mm feed about 15 m / min. Veneer thickness approximately 0.4 - 2.0 mm drive 0.18 kW motor voltage 400 V, 50 Hz, 3 Ph. total value of 0.5 kW connect AD-ID: A488501 More Infos click here
Veneer building up machine veneer sticking machine , Kuper, 420, , Make Kuper type FW / Mini 420 overhang 420 mm thread electric heating table model space LxWxH approximately 660 x 630 mm x 460 mm .. AD-ID: A345734 More Infos click here
veneer saw, SCHEER, FM8 3100, • pneumatical pressure bar, length 3100 mm
• veneer-support-table size 3100 x 500 mm
• saw motor size 1,85 kW, rpm 2850
• suction motor size 0,37 kW, rpm 2800
• machine size (LWH) ca. 3745 x 800 x 1200 mm
• weight 400 kg, AD-ID: A424887 More Infos click here
Double Scissors , Kuper mit System Josting, ZFS 2800, , Double scissors with Kuper system Josting Type: ZFS 2800 Bj: 2003 Cutting length 2800 mm Einlegehöhe 80 mm cut range 20 - 470 mm total value of 9.5 kW connect Weight: 8100 kg AD-ID: A478989 More Infos click here
Veneer guillotine/Massicot à placage/Giltyna do forniru , Josting, , stock-no. 5474
Veneer guillotine Josting
cutting length 2100 mm
with parallel fence
2-hand-operation
light barrier will be retrofittet
price on request
********************
Pozycja -Nr. 5474
Giltyna do forniru Josting
dlugosc ciecia 2100 mm
obsluga dwureczna
bez zapory swietlnej
************************
No. de stock : 5474
Massicot à placage Josting
Longueur de coupe 2100 mm,
Avec guide parallèle,
Commande bimanuelle,
Furnierzusammensetzmaschine , Kuper, FW 1150, , Forward width 1150 mm veneer strength min. 0.3 mm veneer strength max. 3 mm feed speed 10-30 m / min engine performance 0:55 kW 1.5 kW total weight of 530 kg Dimensions 2130 x 1650 x 750 mm AD-ID: A489006 More Infos click here
Kuper veneer building up machine type L.G. 1200 N , Kuper , FW 1200 N, , Standard Heating III / K To Assemble of veneers of approximately 0.4 - 3.0 mm. As an adhesive, a medium Spezialleimfaden, in zigzag or wavy heated by a thread guide is applied. Fugue guaranteed dense, high adhesion strength and rice also strongly wavy veneers. Pressing later when the Leimfaden laid inwards. A scraping of the adhesive medium is therefore not necessary [...Technical data truncated] AD-ID: A337682 More Infos click here
Veneer scissors Hymmen , Hymmen, , , veneer Hymmen scissors manufacturer - cut length 2100 mm - Anchorage adjustable hand crank - adjusting the range of 25 - 700 mm - in good condition AD-ID: A455894 More Infos click here
Veneer building up line , Rueckle , , , Furnierzusammensetzlinie Make Rückle Bj 1982 consisting of: Vorlegebeschickungssystem format Clipper type AFN 34 H with gluing Zusammensetzmaschine type FZS veneer transport with edge reinforcement, Besäumeinrichtung and Abstapelung veneer Qürzusammensetzmaschine FZS 34 veneer requirement veneer strip length: 750 - 3,400 mm with Rändverstärkung / Besäumung : Min. 1500 max. 3,400 mm veneer strip strength: 0.4 - 1.5 mm depending v [...Technical data truncated] AD-ID: A406868 More Infos click here
Furnierschere , CASATI, 3100, , working length 3100 mm Replicate attack front and rear circulation cut joints bar pneumatic pressure indicator light barrier AD-ID: A380202 More Infos click here
veneer splicing ( cross), HAUG, FQZ 140-a / FST 140-a, splicing via hotmelt glue thread, type 1220 (KUPER)
max. length of veneer ( 1 track) 2.200 mm
max. length of veneer (2 tracks) 700mm left / 1.050 mm rigth
min. length of veneer 395 mm
min. width of veneer 40mm
thickness of veneer 0,5 - 3,2 mm
including clipper and automatic stacking device FST
dimension: length 250 x width 150 x height 160 cm
stacking device length 310 x width 170 x height 90 cm
length 240 x width 170 x height 40 cm
, AD-ID: A497622 More Infos click here
Furnierschere , Hymmen, AS 260, , 2600 mm OFF with electrical width notice safety
light barrier with 2 hand protection circuit AD-ID: A390904 More Infos click here
Kuper veneer final adhesive EMZ/2 , Kuper , EMZ/2, , with a built-III / C Heating painting RAL 1015 380 V, 50 Hz to both sides Endverkleben and trimming of about 0.4 to 1.0 mm thick veneers. The veneers are perpendicular to the fiber entered into the machine. Two upper rollers on conveyor belts alongside serve as attack and ensure that the veneer carpet Right inserted and glued will be curtailed. At the two ends of a rectilinear of Lei [...Technical data truncated] AD-ID: A335643 More Infos click here
veneer splicing machine, Kuper, 900 (19828), used, cleaned, function checked,
partly revised.
new parts: output roll, cover,
inlet nozzle
manufactured by Kuper
type 900
mach. No. 1705 3214
range 900 mm
thread
heating system electrical
required space ca. l x w x h mm
1,300 x 700 x 1,500
located in 97447 Gerolzhofen
No responsibility is taken for the correctness of this information!
luminous table, Kuper, LT, For the quality control of spliced veneers. An evenly illuminated inspection area is achieved by the funnel-shaped reflector shell in conjunction with an opaque glass panel. The electric equipment of the inspection table consists of: 1 fluorescent light tube and 2 built-in sockets.
illuminated surface: 1.380 x 630 mm
thickness opaque glass panel: 6 mm
shipping space: approx. 1,3 m³
colour: RAL 6011, AD-ID: A259688 More Infos click here
Fugenverleimmaschine , Fischer - Rueckle, FZK , , Fugenverleimmaschine fishermen Rückle Type: FZK Bj: 1996 veneer mass: Strength: 0.3 2.5 mm Width: 45 1200 mm length min.: 300 mm pass speed: 10 52 m / min. Heizzonenlänge: 1000 mm Heiztemperatur: thermostatically regulated from 50 to 250 degrees C Electrical Value: 6 kW mass: 2700 x 2000 x 1660 mm Weight: 1530 kg AD-ID: A479018 More Infos click here
Veneer jointing machine , Beck, , , HR-REF-1691 Maschinenart: veneer joining machine manufacturers: Beck Built: Unknown Weight: 70 kg approximately: L (mm): 1460 B (mm): 750 H (mm): 1200 Specifications: no technical Documents available Status: geplegt, operational (attachment guard defective) Price: 380, - Euro net Location: Rhein-Main Verladegerät spot: with mining, loading and transport are task of the buyer. The trading house Ravensberg organized, if necessary [...Technical data truncated] AD-ID: A348295 More Infos click here
Furnierzusammensetzmaschine Kuper FW 420 , Kuper, FW 420, , Kuper Furnierzusammensetzmaschine; overhang 420 mm; for glue thread; machine, and in order AD-ID: A463568 More Infos click here
Kantenanleimmaschine, ALTENDORF, Akzent V 31 Tischgeraet, , Offer number: HR-1200 Maschinenart REF: Kantenanleimer / edgebander Manufacturer: ALTENDORF Type: accent V 31 Built: 1991 Dimensions approximately: L.: 1,750 mm W.: 530 mm H.: 600 mm plus role-Teller: 600 mm table mass: 1,750 x 380 mm Weight: 135 kg feed: available piece thickness: 10 - 55 mm edge thickness: 0.4 - 1.0 mm Reel Disconnect max.: 0.8 mm wide piece min. 50 mm Werkst [...Technical data truncated] AD-ID: A307703 More Infos click here
Veneer-stick, Kuper, , , work area 1150 mm weight 530 kg of total width
2100 mm of overall height of 1350 mm/1700 mm AD-ID: A307774 More Infos click here
Joining and fine-cut Machine , SCHEER, FM 5-3100, , joining and fine-cut machine Fa Scheer type FM 5-3100 BJ about 75 length about 3 m, with Vorritzer on mobile metal frame AD-ID: A461035 More Infos click here
operational Furniersaege, SCHEER, FM 3 fuer 2.500 mm Furnierlaenge, , Offer number: HR-1333 Maschinenart REF: veneer saw Manufacturer: SCHEER Type: FM 3 machines no.: 161519 Built: Unknown Weight: 300 kg Standard mass approximately: - L = 3,200 mm - B = 1,000 mm - H = 1,500 mm connection: 380 V engine power: 1.5 kW motor speed: 2,820 rpm pressure beam delivery by hand veneer length max.: 2,500 mm diameter saw blade: 180 mm Other: rollbar (roles au [...Technical data truncated] AD-ID: A315037 More Infos click here
Veneer scissors , JOHN, FS VII, , veneer scissors FS VII Built in 1964 average length 2600 mm average height 100 mm Electric Setting the working height Electric Setting the working width (0.37 kW) AD-ID: A458847 More Infos click here
throat depth 1200 mm
working height 925 mm
material speed, with thread only approx. 10 – 45 m/min.
material speed, by butt gluing without
thread and combined with thread approx. 10 – 20 m/min.
main drive 1,1 kW
operating voltage, standard 380 V , 3 Ph + Mp, 50 Cycles
total connection 3,6 kW
glue thread heater III/K 160 W
air nozzle heater 1400 W
air consumption approx. 350 NL/min.
weight: 850 kg
space requirement 2,62 m x 1,97 m x 1,93 m
Funcion description:
The veneer is fed to the glue discs and the cut edges of the veneer are covered with PVAC glue. A blower heater is behind the glue station. Hot air is blown from this area onto the veneer edges out of many small nozzles. The hot air dries and activates the glue. The veneer with the glue covered edges are then joined in the splicer. Then the veneers are joined together with the aid of the discs, which rotate opposite to one another, and with pressure rolls. For an extra intensive gluing of the veneer sheets a glue thread can also be applied. price on demand
***************
Pozycja Nr. 5434
Sklejarka furniru na styk Kuper
Model: FW/L 1200
grubosc forniru od 0,4 – 2 mm
min. dlugosc forniru 400 mm
wysieg ramienia 1200 mm
wysokosc stolu: 925 mm
predkosc posuwu przy laczeniu z nitka od 10 -45 m/min predkosc posuwu przy klejeniu na styk bez nitki, lub z nitka ok 10-20 m/min
silnik napedu 1,1 kW
napiecie robocze 380 V, 50 Hz
laczna moc przylaczeniowa 3,6 kW
zapotrzebowanie miejsca 2,62 m x 1,97 m 1,93 m
ciezar: 850 kg, AD-ID: A469513 More Infos click here
Veneer composition machine , Kuper, FW/J 900, , Ständerausladung 920mm, veneer thicknesses of approximately 0.3 - 3mm, feed speed 15m/min, 380V / 0.45 kW weighing approximately 185 kg, mass approx 1350 x 500 x 1750 mm, mobile, apparently little gone from solid wood operations. Please see the PDF file with our terms and order. AD-ID: A439217 More Infos click here
Furnierschere , Josting, EFS 2800, , schnittlaenge: 2,800 mm of light barrier safety
device (can be re-tooled) parallel guide stop with engine high-speed
adjustment arranging light to the clear marking of the cut line AD-ID: A427568 More Infos click here
Veneer sticking machine , Kuper, , , HR-1487 Maschinenart REF: veneer bonding machine manufacturers: Kuper Voltage: 380 V condition: maintained / operational Price: 1.150, - Euro net Location: Stuttgart region Verladegerät spot: available dismantling, loading and transportation are the responsibility Purchaser. The trading house Ravensberg organized when needed like the loading / transport of goods. AD-ID: A328041 More Infos click here
Veneer building up machine , Kuper, FW Mini 420 (18349), , Make Kuper type used FW / Mini 420 overhang 420 mm thread electric heating table model space LxWxH approximately 660 x 630 mm x 460 storage 97447 Gerolzhofen All information is subject to change! AD-ID: A332838 More Infos click here
Veneer scissors , Jostig, , , Solid electric scissors with pneumatic piece tension. 2100mm cutting width. Depth gauge or width of manually adjustable attack. AD-ID: A471709 More Infos click here
VENEER BUILDING UP MACHINE/VENEER STICKING MACHINE , KUPER, FWJ 900, , 900 mm thread Ständerausladung electric heating feed about 15 m / min. Veneer thickness 0.4 - 2 mm AD-ID: A342916 More Infos click here
Veneer Add , Mayer, 3500 FSK, , veneer joining Mayer type FSK Built in 1993 Dietz engine 380 V 7.7 / 9.1 A 1390 / 2850 rpm 3.4 / 4.2 Kw With Hobelkopfagregat 3500 cut length, special table, pneumatic LxHxT 5400 mm / 1500 mm / 950 mm NEW Top cared! AD-ID: A454281 More Infos click here
Throat depth 1200 mm
Feed speed infinitely variable approx. 10 - 50 m/min.
Veneer thickness approx. 0,4 - 2,0 mm
Veneer length from approx. 400 mm
Veneer strip width from approx. 50 mm
Drive 1,1 KW, 400 V, 50 Cy.,
Operating Voltage 400 V, 50 cyc.,3 Ph. + MP
Total connected load 6,5 kW
Air consumption approx. 600 NL/min.
Paint RAL 6011
Net weight approx. 1205 kg
For the longitudinal splicing of veneers with preglued edges from about 0,4 up to 2,0 mm thickness.
As joining medium a special PVAc glue is used which
has been applied to the veneer edges in a separate
gluing device before (KUPER KLM).
By means of a special heating system in the
FW/L 1200 V the glue is re-activated while the
sensitive feed discs are pulling the veneer edges
together. The PVAc glue is a rapid hardening,
joint filling white glue.
For the splicing of wavy veneers, the joint can be
reinforced by simultaneous application of a glue thread. Special features of the FW/L-1200 V are high throughfeed speed and easy operation.
, Josting, EFS 2300 L , Tl.-Id. 2067119 cutting length 2300 mm
inlay height 80 mm
motor parallel fence, three-phase current 0,12 kW
adjusting range of parallel fence 25 - 700 mm
positioning control
with individual measurement, chain measurement,
storage measurement and division measuerement
pressure beam operation by hydraulic 4,0 kW
knife drive by brake motor 3,5 kW
6-fold photo cell
guiding light
connection 380 V, 50 cyc.
length 3600 mm
width 1750 mm
height 1700 mm
weight 2900 kgs
, AD-ID: A412085 More Infos click here
Josting furnierschere EFS 2100 , Josting , EFS 2100, , 2-fold Lichtschrankengesichert working width 2100 mm electr. Parallel stop digital display Differing technical equipment are reserved. For further information please contact our sales staff. AD-ID: A432390 More Infos click here
Feed-through veneer press, BÜRKLE, ODW 2620/6, Platen length mm 3.000; Platen width mm 2.600; Press opening 150; Number of cylinders 13; Pressure kg/cm2 6; Total pressure t 468; Temperature up to °C 140; Total connection kW 25; Glue spreading Yes; Infeed belt conveyor Yes; Automatic unloading Yes; Heating platens Water; Material of the platen S, AD-ID: A366790 More Infos click here
automatic veneer patcher, INTERHOLZ-RAIMANN, ASA I, Throat from center of tool to the column : 850mm
Thickness of veneer up to 6mm
Length of tool 50mm
Horsepower of motor 3PS-1500U/m.
Number of strokes -60/min
Space required -2200x1200mm
Nt weight - 2300 kg, AD-ID: A468477 More Infos click here
Kleistronik , Kleistronik Furniermess- und Gradingline , Kleistronik Furniermessanlage und Gradingline , , General: ---------------- With the veneer plant will be individual packages for the control of suppliers and at the same time they are qualitatively evaluated. Veneer of the individual packages will be surveying the lot and a list printed with the corresponding delivery of suppliers compared. In addition to the investment already ordered, or trimmed and re-measured packets labeled to them in connection ver [...Technical data truncated] AD-ID: A380367 More Infos click here
Guillotine, CASELLAS, CC 250, Number of spare knifes 12; Strip width max mm 250; Cutting height mm 1; Strip width min mm 22; Weight kg 150; Through-feed technology Yes; Counter knife Yes; CE-mark Yes; Parallel fence Manually; Blade drive Electromotive; Availablity Warehouse D-01665 Klipphausen; In offer since 11-12-07; Conditio, AD-ID: A391743 More Infos click here
VENEER SPLICING MACHINE, Kuper, FZK/D, , Furnierzusammensetzmaschine to connect the veneer pieces will be on the Stosskante an adhesive tape from papier raised AD-ID: A475834 More Infos click here
, Josting, EFS 2300 , Tl.-Id. 2062346
cutting length 2300 mm
inlay height 80 mm
motor parallel fence, three-phase current motor 0,12 kW
adjusting range of parallel fence 25 - 680 mm
with digital display, also for strips cutting
hydraulic pressure beam operation 3,0 kW
knife beam by brake motor 3,5 kW
industrial safety light curtain (2-fold at the moment)
alignment light
connection 380 V, 50 Hz
length 3400 mm
width 1650 mm
height 1600 mm
weight 2300 kgs
Funiersäge , Scheer, FM 5-3100, , Copy and Feinschnittmaschine of Scheer immediately deployable in good condition. - With pneumatic pressure bar - With vacuuming - 310 cm Funierlänge AD-ID: A479680 More Infos click here
FURNIERSAEGE , SCHEER, FM 5-3100, , Cutting length 3100 mm with dust around Sack blade diameter of 180 mm in good condition AD-ID: A492169 More Infos click here
Furnierfügemaschine 5 meters with Hobelaggr. , Mayer, , , Furniersäge with 5 m cutting length and planing aggregate AD-ID: A481717 More Infos click here
, Josting, QFS 1300 , Tl.-Id. 2067118
pulling cut
cutting width 1300 mm
input height 40 mm
knife operation by brake motor
motor 380 Volt, 50 cyc 4,1 kW
two-hand safety control
pneum. pressure bar
big preparing table on the left-hand side
with stop rail 2400 mm
length 2400 mm
width 800 mm
height 1750 mm
weight 1450 kgs
, Josting, EFS 2600 , Tl.-Id. 2066580
cutting length 2600 mm
input height 80 mm
motor parallel stop, three-phase motor 0,12 kW
adjusting range of parallel stop 25 - 680 mm
with digital indicator, also for strip cutting
pressure-beam being operated manually 2,2 kW
knife beam by brake motor 3,5 kW
accident-protection light curtain(double at the moment)
directive light
electrical connected load 380 V, 50 Hz
length 3800 mm
width 1700 mm
height 1600 mm
weight
, Josting, PFS 2100 , Tl.-Id. 2061784
cutting length 2100 mm
inlay height 60 mm
motor parallel fence, three-phase current motor 0,12 kW
adjusting range of fence 25 - 680 mm
with digital display, also for stripes cutting
pneumatic pressure beam 8 bar
knife beam by brake motor 1,8 kW
industrial safety light curtain (2-fold at the moment)
alignment light
connection 380 V, 50 Hz
length 3100 mm
width 1650 mm
height 1450 mm
weight 2100 kgs
veneer splicing machine, Kuper, FW Junior 900 (19572), used
manufactured by Kuper
type FW Junior 900
range 900 mm
thread
electrical
required space ca. l x w x h mm
600 x 1,400 x 1,400
located in 97447 Gerolzhofen
No responsibility is taken for the correctness of this information!, AD-ID: A451256 More Infos click here
Funierzusammensetzmasch ne , Ott, OFM/S, , OTT Typ.OFM / S built 1971 Funierzusammensetzmaschine Masch.Nr.7683 stand version, 2 throughput speeds, Mikroschaltersteürung, Polumschaltbarem phase AC 400V gearmotor 0,25 kW, traveling. G & SONDEERPREIS NET OF 350th -- AD-ID: A455812 More Infos click here
Veneer cutter, Josting, EFS 3200, , average length: 3,200 mm - photoelectric backup - parallel stop with engine quick adjustment - directional light to clear demarcation of the cut line AD-ID: A475733 More Infos click here
Funiersäge , Scheer, FM 2-3000, , Scheer Funiersäge FS-2-3000 built 1984 400V average length of 3000mm Manual fixture with hand. G & SPECIAL please inquire! AD-ID: A454612 More Infos click here
Veneer jSplicing machine, KUPER/HUSER, ZU-ST-330FP, Veneer thickness 0,5 -1,0mm
Veneer width 80 -330mm
Veneer length from 250mm
Operating voltage 400V/3Ph/50Hz
Total connected load 1,7kW
Commpresed air 8-10 bar
Compresed air consumption
60 -100 NL/min., AD-ID: A472668 More Infos click here
for the joining of veneer thickness 0,4 – 3 mm
throat depth 1700 mm
variable infeed speed 10 - 30 m/min.
drive brake motor 0,55 kW
input power 1,5 kW
air consumption 2 NL/min.
weight: 730 kg
price on demand
****************
pozycja nr 4764
Zszywarka do furniru Kuper
typ FW 1700
wysieg – dlugosc zszywania 1700 mm
posuw bezstopniowo regulowany 10-30 m/min
do laczenia furniru o grubosci 0,4 – 3 mm
laczna moc przylyczeniowa 1,5 kW, AD-ID: A442743 More Infos click here
Complete peeling line + dryers and tie-clip by , Keller, BSH, , , Centring company cellar type GZB 4-10/26 Bj. 1981 points of centring 3 log max. length 2,600 mm log max. dia. meter 800 mm log min. dia. meter 200 mm change time 8-10 sec. log Peeling machine Fabr. Cellar type 10K 26T log max. length 2,600 mm log max. dia. meter 1000 mm log min dia. meter 200 mm log min. length 1,800 mm without support measurer length 2,700 mm of measurer angles 69 Measurer strength 16 mm max. veneer strength 7 mm of Restzilinder/log 110 mm of spindle number of revolutions 350 per minute Retractor plant type AVUA section 2 max. retractor material 2,800 mm dia. meters of roles of 197 mm of number of revolutions of 30 384 per minute Tray system Singular of section 2 singular of floors 5 length 12,675 mm broad 2,600 mm Phneumatikschere type CXA 27 measurer length 2,760 mm of measurer angles 20 Veneer strength max. 5 mm of Gegenmesser 1 Stk. Net volume dryer Fabr. Babcock BSH, type EBDU III 304/26 m.k. 3 floors length 40,363 m broad 5 m height 3.42 m work length 26 m work width 3 m veneer strength 0.8 -6 mm Phneumatikschere type STCZ 28 double width 2 x 1,400 mm 2,800 mm of volume 30000 40000 Schnitt/8 hr. inclusive with conveyor plants Price on request AD-ID: A443070 More Infos click here
Complete peeling line + dryers and tie-clip by , Keller, BSH, , , Centring company cellar type GZB 3-10/14 Bj. 1981 points of centring 3 log max. Laenge 1,400 mm log max. dia. meter 800 mm log min. dia. meter 200 mm change time 8-10 sec. log Peeling machine Fabr. Cellar type 10K 14T log max. Laenge 1,400 mm log max. dia. meter 1000 mm log min dia. meter 200 mm log min. Laenge 650 mm Messerlaenge 1,500 mm of measurer angles 20 Printing bar angle 69 Measurer strength 16 mm max. veneer strength 7 mm of Restzilinder log 110 mm of spindle number of revolutions 350 per minute Retractor plant type AVUA section 2 max. retractor material 2,800 mm dia. meters of roles of 197 mm of number of revolutions of 30 384 per minute Tray system singular of section 2 singular of floors 5 Laenge 12,675 mm broad 1,400 mm Phneumatikschere type CXA 17 Messerlaenge 1,760 mm of measurer angles 20 Veneer strength max. 5 mm of Gegenmesser 1 Stk. Net volume dryer Fabr. Babcock BSH, type EBDU II 304/36/38/3 S m.k. Floors 2 length 49,013 m broad 4.54 m height 2.955 m work length 38 m work width 3 m veneer strength 0.8 to 6 mm Phneumatikschere lower part type STCZ 31 double width 2 x 1,550 mm 3,100 mm of volume 30000 40000 Schnitt/8 hr. inclusive with conveyor plants Phneumatikschere upper section type STCZ 31 double width 2 x 1,550 mm 3,100 mm of volume 30000 40000 Schnitt/8 hr. inclusive with conveyor plants Price on request AD-ID: A443072 More Infos click here
, Josting, PFS 2100 , Tl.-Id. 2069532
cutting length 2100 mm
input height 60 mm
motor parallel stop, three-phase motor 0,12 kW
adjusting range of stop 25 - 680 mm
with digital indication, also for strip cutting
pneumatic pressure beam 8 bar
knife beam by brake motor 2,8 kW
noise-protection light curtain (none at the moment)
directive light
electrical connected load 380 V, 50 Hz
length 3150 mm
width 1450 mm
height 1650 mm
weight 2100 kg
, Josting, EFS 2600 , Tl.-Id. 2069405
cutting length 2600 mm
input height 80 mm
parallel stop with hand wheel
adjusting range of parallel stop 25 - 680 mm
with digital indicator, also for strip cutting
pressure beam being operated hydraulically 2,2 kW
knife beam by brake motor 3,5 kW
noise-protection light curtain (not existing at the moment)
post-cut device
directive light
electrical connected load 380 V, 50 Hz
length 3800 mm
width 1600 mm
height 1800 mm
weight 2600 kg
Veneer scissors , Josting, PFS 2100 , , Tl.-Id. 2069216 average length 2100 mm Einlegehöhe 60 mm motor parallel stop, AC motor 0.12 kW setting range attack 25 - 680 mm with digital display, including strip bars pneumatic pressure cutting 8 bar cutter bar using Brake Motor 2.8 kW safety light curtain (currently no) After cutting teaching institution light Following 380 V, 50 Hz length 3150 mm width 1450 mm height 1650 mm weight of 2100 kg AD-ID: A448729 More Infos click here
, Josting, EFS 2300 , Tl.-Id. 2069066
cutting length 2300 mm
input height 80 mm
parallel stop with hand wheel
adjusting range of parallel stop 25 - 680 mm
with digital indicator, also for strip cutting
pressure beam being operated hydraulically 2,2 kW
knife beam by brake motor 3,5 kW
accident-protection light curtain (none at the moment)
directive light
electrical connected load 380 V, 50 Hz
length 3500 mm
width 1600 mm
height 1900 mm
weight 2300 kg
Veneer punch zig-zag Schanbacher , Schanbacher, , , pneumatic cutting width approximately 37cm built on mobile 1m per table left and right as new condition AD-ID: A448851 More Infos click here
Endverklebemaschine , Kuper, EMZ/2 - M, , working width 400-2800 mm thick veneer 0.3 - 1 mm feed infinitely 15-30 m / min more information by phone or mail AD-ID: A453277 More Infos click here
Veneer Splicing Machine, Kuper, FW 1150, , to the assembly of precious and Absperrfurnieren in thicknesses from 0.3 to 3 mm, with glue thread (zig-zag) stands out cargo 1150 mm, feed infinitely 10-30 m / min, three-phase 380 Volt, 50 HZ, Total Consumption 1.5 kw, 525 kg net weight, space requirements 2.14 x 0.78 m = 1.68 m AD-ID: A475829 More Infos click here
, Josting, EFS 2800 , Tl.-Id. 2069860
cutting length 2800 mm
input height 80 mm
motor parallel stop, three-phase motor 0,12 kW
adjusting range of parallel stop 25 - 680 mm
with digital indicator, also for strip cutting
pressure beam being operated hydraulically 2,2 kW
knife beam by brake motor 3,5 kW
noise-protection light curtain (none at the moment)
directive light
electrical connected load 380 V, 50 Hz
length 4000 mm
width 1750 mm
height 1750 mm
weight 2800 kg
veneer splicing machine, Kuper, FWJ 900 (19855), used, cleaned, function checked,
test run, partly revised,
pressure regulator new
manufactured by Kuper
type FW J 900
mach. No. 19034551
range 900 mm
thread
heating system electrical
moveable
required space ca. l x w x h mm
700 x 1,400 x 1,600
weight ca. 250 kg
located in 97447 Gerolzhofen
No responsibility is taken for the correctness of this information!
Veneer composition machine , Kuper, FW J90, , veneer composition machine, Serial Kuper FW J90; footprint 135 x 58 x 147 cm; cared very top condition; For inquiries, I'll always available! AD-ID: A482845 More Infos click here
Furnierzusammensetzmaschine , Haug, FZZ 70, , Ständerausladung 700mm, veneer thicknesses of approximately 0.3 - 2mm, 230V weighing about 150 kg mass approximately 920 x 600 x 1100mm, mobile, very little went, very good condition. Bonding from below, thereby no inversion of the veneer before Pressing needed. Please see the PDF file with our terms and order. AD-ID: A488879 More Infos click here
veneer splicing machine, Kuper, FW 1150 (19952), used
manufactured by Kuper
type FW 1150
mach. No. 4358
range 1,150 mm
thread
heating system electrical
required space ca. l x w x h mm
2,200 x 800 x 1,900
located in 97447 Gerolzhofen
Sale in current condition.
Without technical check.
Not repaired.
No responsibility is taken for the correctness of this information!
