pulverizer, HERBOLD, PU 1250, pulverizer
avaiable with exchangeable rotor/stator configuration drive max.200 kw
machines can be shown in operation, AD-ID: A52173 More Infos click here
Holzschredder, Cramer, UNICAT, , Mobile Wood / Universalschredder, Gummibereift with hook to Anhängen.Anwendungsbereich: scrub tree bark-cut vegetables cardboard boxes-dry wood and hammer blow for Erdaufbereitung.Hochtouriges work with 32 strike hammers arranged in a spiral rotor. Hydraulic catchment roller speed Infinitely regelbar.Kraftstrom 15 kW. VB Price AD-ID: A300333 More Infos click here
chopper, Nestro, Typ EZ 6/1 S, built in 2008, engine performance 18.5 KW, exhaust air port Ø = 160 mm, hydraulic slidegate, rotor width 600 mm, rotor Ø = 348 mm, control desk, new using machine, overhaul, ex-factory price over euro 19,100, , AD-ID: A138058 More Infos click here
shredder, Schuko, ZM 700, fabrikation no. 7/171
year of production: 1990
motor power: 11kW
rotation speed: 74 U/min, AD-ID: A309506 More Infos click here
Hacker, Osmeka, , , Built around 1983 with essay funnel 1500 x 1500 mm engine power 22kW turbo coupling box knives were sharpened The Hacker is fully functional and can also be presented. AD-ID: A227254 More Infos click here
Zerkleinerer , UNTHA (Unterwurzacher), RS-30-4WS, , low-speed engine, 4 wave system, 650 X 450 mm of
opening, time switch clock, 2 x 5.5 KW of engines, drive with gear
wheels in oil bath constantly! AD-ID: A419368 More Infos click here
, Gross, GAZ 62, Tl.-Id. 2069071
year of construction: 2008
*** SHOW ROOM MACHINE ***
With this hogging machine, all kinds of
wood waste, thin strips, coated
chipboard etc. can be processed to hog fuels.
Wood pieces or diagonal sizes of bulky material
should not be wider than machine width in order
to ensure an absolutely smooth operation.
technical data:
feed opening 600 x 800 mm
height of funnel 1100 mm
funnel capacity approx. 0,6 cbm.
rotor diameter 252 mm
rotor length 600 mm
rotor rotation approx. 90 rpm.
powr requirement 18,5 kW
tools 14
screen perforation 15/20 mm
suction nozzle 160 mm
special rotor
switch cabinet with approx. 5 m cablefrom
automatic delta-star start-up
automatic stop in case of idle run
vibration-reducing machinery feet
legnth 1850 mm
width 1250 mm
height 1650 mm
weight 1300 kgs
size: 1305 x 1470 mm
rotor diameter: 370 mm
rotorspeed: 122 UpM
number of knives: 37
power: 37kW / 1470 UpM
whole diameter: 15 mm
completely checked, AD-ID: A410118 More Infos click here
Waste chipper / hogger, JENZ, HE 220 280 TK, Vertical hogger with cutterblock
Infeed: 40 x 30 cm
Motor 22 kW
Dust extraction outlet: 200 mm., AD-ID: A452330 More Infos click here
Farmer judge dickenhobel type S 520 , Bauerrichter , S 520, , technical data:
---------------------------- Plane width: 520 mm plane height min/max.
3/250 mm of splinter acceptance max. 8 mm 4-Messerwelle Durchm. 120 mm
of measurer wave number of revolutions 4500 U/min. Deviating one
technical equipment remains reserving. Further information give you
gladly our coworkers in the selling. AD-ID: A432407 More Infos click here
waste wood chipper, Gross, GAZ 62 E (19333), manufactured by Gross
type GAZ 62 E
exhibition machine - NEW
clamping: 400 V/50 Hz
opening: 600 x 800 mm
hood volume: 0,6 m³
performance depends on material and strainer
rotor diameter: 252 mm
rotor length: 600 mm
rotor rpm: 60- 100 UpM
motor performance: 18.5 kW
cutting system: 14 cutters
dust extraction hood: 160 mm
dimensions: l = 1,800 mm
w = 1,230 mm
h = 1,640 mm
weight: ca. 1,300 kg
No responsibility is taken for the correctness of this information!
Hackers chopper wood chippers , Weima, WL 6, , cultivated the little hackers in use. 18 kW 800 x 1000 funnel opening rotor length 800 mm diameter 252 mm pictures and more details on request. AD-ID: A451362 More Infos click here
briquette press, VOTECS, Typ AP 675s, Neumaschine, built in 2008, 7,5 KW hydraulic system, briquette Ø=60 mm, control desk, new-condition, ex-factory price euro 17.500, -…, AD-ID: A232380 More Infos click here
hogger - waste chipper, MARIO FERRARI, F3 T2, horizontal waste chipper
Feeding by a viborinne: 32 cm width, 170 cm length
Input: 32 x 12 cm Motor: 30 kW
Outlet for dust extraction with diameter 270 mm
Capacity 1 to 2 m3/hour
Nip rollers at the infeed
Diameter of cutterblock: 330mm
Speed of cutterblock: 850 tr/min
Number of knives: 2
Partical length ca.: 10-15mm, AD-ID: A452336 More Infos click here
Hacker , Gross, GO GAZ 62 E, , NEUMASCHINE! Exhibition! WEIBERT GO GAZ 62 E built 2008 400V 18.5 KW Zuführöffnung 600 x 800mm funnel content 0.6 m throughput screening material and Depends, rotor diameter 252mm, 600mm length rotor, rotor speed 60-100 rpm., Tools, 14 knives, mesh sieve 10-40mm , Absazgstutzen of 160mm, Luftgeschw. 28 m / sec. Weight of 1300kg. L = 1800mm B = 1200mm H = 1640mm The material feed via the filling containers (funnel). A hydraulically [...Technical data truncated] AD-ID: A452311 More Infos click here
rozdrabniarka czterowalowa
wymiary wlotu 1000 x 1300 mm
obszar roboczy 450x560 mm
silnik 2x 7,5 kW
otwory sita 15 mm
wlasciwa do drewna i tworzych sztucznych
wydajnosc zalezna od materialu i otworow sita :
sito Ø 15-25 mm wydajnosc 1 – 3 m³/h
sito Ø 30-45 mm wydajnosc 3-5 m³/h
Vierwellen Schredder , UNTHA, RS 30/4S, , Width 500 mm rotor, rotor diameter of 200 mm, running 500 x 500 mm, Power 2 x 7.5 kW, outdated AD-ID: A399058 More Infos click here
Hacker , SCHUKO, ZM 600-SPS, , Width 600 mm diameter rotor. 220 mm rotor speed 110 rpm Stromstärk 22 A / 11 kW / 50 Hz capacity of 180 kg / h operating hours 160 hours abgelesene turning tool cutting knives 6 Vacuum 160 mm in diameter weighing 900 kg Dimensions 1300 x 1000 x 1640 mm Hacker is visually and technically 100% and has been properly reviewed! AD-ID: A447677 More Infos click here
HOLZZERKLEINERER , GROSS, GAZ 62 E, , LG 01802, 01803 Neumaschine! Built in 2008 Motor power: 18.5 kW Zuführöffnung: 600 x 800 mm funnel content: 0.6 m rotor diameter: 252 mm rotor Length: 600 mm rotor speed: 60 - 100 rpm. Cutting: 14 knives mesh sieve: 15 / 20 mm automatic. Stern triangle start, automatic-off at idle electronic Steürschrank with 5 m harness CE-compliant, GS-character "staubgeprüft" Instructions AD-ID: A393142 More Infos click here
chopper, VOTECS , EZ 6/2 S, built in 2008, engine performance 18.5 KW, exhaust air port Ø = 160 mm, hydraulic slidegate, rotor width 620 mm, rotor Ø = 348 mm, control desk, new machine, ex-factory price over euro 19.500, -…, AD-ID: A384826 More Infos click here
Low-speed engine STARTING FROM 1000 with lying introduction , Reinbold, , ,
low-speed engines with 37 KW of achievement with lying introduction
over Vibrorinne work width 1000 mm work height 200 mm AD-ID: A421373 More Infos click here
Restholzzerkleinerer , Osmeka, Typ:162 AD., , charging hole 1000mm x
1000mm. Electrically opening cover. Drive power 22KW. Forwards and
Nachzerleinerer Bj.86. Number of revolutions: 64 U/min. Weight 2.61
tons. AD-ID: A436978 More Infos click here
, Weima, WL 4 , part Id-no. 2069683 actual condition FÜP hopper height 1200 mm hopper content 0,6 rotor diameter 252 mm tools 14 Stück device to push against stop yes mesh aperture 15/20 mm exhaustion 160 mm motor capacity 18,5 kW connection 380/50 Volt / Hz
machine dimension length 1850 mm width 1150 mm height 1600 mm weight 1100 kg , AD-ID: A448378 More Infos click here
, Gross, GL 6, Tl.-Id. 2060447
with profile rotor and hydraulic feeding
With this hogging machine, all kinds of
wood waste, thin strips, pallets, coated
chipboard etc. can be processed to hog fuels.
Wood pieces or diagonal sizes of bulky material
should not be wider than machine width in order
to ensure an absolutely smooth operation.
Technical data:
feed opening 800 x 1000 mm
height of funnel 1100 mm
funnel capacity approx. 0,8 cbm
rotor diameter 248 mm
power requirement 18,5 kW
rotor speed approx. 90 t/min.
tools Delta Smal
screen perforation 15/20
suction nozzle 200 mm
length 2150 mm
width 1350 mm
height 1630 mm
weight 1300 kgs
, AD-ID: A402219 More Infos click here
Wood waste grinder, DIEMER, MSK, Capacity mü/h 6; Main motor kW 5,5; Loading from top Yes; Availablity Short-term, ex location customer!; In offer since 08-05-07; Condition Unchecked; , AD-ID: A332521 More Infos click here
Osmeka Holzzerkleinerer type 100 , Osmeka , Typ 100, , Osmeka Holzzerkleinerer type 100 Year of construction 1987 22 KW of number of revolutions 64 rpm. Funnel 2 x of 2 meters AD-ID: A427684 More Infos click here
Hacker , POLYTECHNIK, PMZ 30, , Drive 2x 7.5 kW cutting factory opening 450x560 mm 4 meter waves speed main shaft about 23 rpm speed Besides wave about 34 rpm grid-diameter hole 15 - 40 mm in length 1300 mm height 1900 mm width 1000 mm depth 1280 mm width cutting plant 450 mm weighing about 1100 kg AD-ID: A421407 More Infos click here
Chopper, Holzma, Z (18095), , uses make Holzma type Z machine. - No. Z 701 engine 30 KW of sprinters Trichteroeffnung L x B mm of 110 x 200 cutting platform width 110 mm measurer system turning measurer 50 mm suction connection 200 x 130 mm inclusive Vibro - gutter 3800 x 200 x 180 mm complete noise control cab stock location 97447 Gerolzhofen all data without guarantee! AD-ID: A319716 More Infos click here
Hacker , REINBOLD Horizontal-Einzug, Langsamlaeufer, RHZ 1000, , Ideal for long pallets and goods. No short cut. Catchment width / Open as well as rotor length 1000 mm, catchment height 200 mm, rotor diameter 370 mm with 100 tools / turning knife. Speed of 104 rpm, 37 kW main engine, feed rollers below 2 pieces, diameter 300 mm. Top 1 piece, roller diameter 500 mm. With discharge conveyor, 300 mm in diameter. Tending with Vibro conveyor 1000 mm x 4000 mm long AD-ID: A431898 More Infos click here
Hacker , ZENO, ZTLL 600 x 1000, , chopping achievement 2 - 2.5 rm/h funnel volumes 0.5 m
chopping length 0 20 mm of engine performance main drive 18 KW of
engine performance hydraulics 0.75 KW weight 1750 kg of number of
tools 20 St. Single taps rotor speed of 110 upm rotor diameters 300 mm
intake cross section length 1000 mm broad 600 mm of suction nozzle
diameters 250 mm AD-ID: A407794 More Infos click here
Hacker , LINDNER, T 300 / 100-2, , length: 170 cm broad: 90 cm height: 98 cm 380 V 50 cycles
per second of 30 KW of Bj: 1978 rotor speed: 2000 U/min. Number of
measurers: 2 scope of supply: Hacker, manual, electrical mechanism,
meat cleaver, div. Tool AD-ID: A421411 More Infos click here
, Gross, GAZ 62, Tl.-Id. 2069072
year of construction: 2008
*** SHOW ROOM MACHINE ***
With this hogging machine, all kinds of
wood waste, thin strips, coated
chipboard etc. can be processed to hog fuels.
Wood pieces or diagonal sizes of bulky material
should not be wider than machine width in order
to ensure an absolutely smooth operation.
technical data:
feed opening 600 x 800 mm
height of funnel 1100 mm
funnel capacity approx. 0,6 cbm.
rotor diameter 252 mm
rotor length 600 mm
rotor rotation approx. 90 rpm.
powr requirement 18,5 kW
tools 21
screen perforation 15/20 mm
suction nozzle 160 mm
switch cabinet with approx. 5 m cablefrom
automatic delta-star start-up
automatic stop in case of idle run
vibration-reducing machinery feet
legnth 1850 mm
width 1250 mm
height 1650 mm
weight 1300 kgs
Hacker cutting up machine , Gross, GAZ 62, , measuring machine supply opening
600 x 800 power required 18.5 KW tool of 14 measurers weight approx..
1,300 kg of pictures can be gemailt price demonstrating machine AD-ID: A429186 More Infos click here
Hammer mill , , , , small Haecksler chopper for wood OAU with connection
to an exhaust, charging hole 20*25cm, engine 5,5KW AD-ID: A389347 More Infos click here
Screening equipment , , , , Screening equipment to the separation Saegemehl and hogged wood 3.30 x 2.70 m, with Ruettelmotor, good condition AD-ID: A432660 More Infos click here
Cutting up machine , VOTECS , EZ 6 /1, , Engine 18.5 KW of slidegate valves rotor 248 mm of 30 measurers rotor speed 90 rpm suction nozzle 160 mm weight approx. 1300 mm model 2008 AD-ID: A428272 More Infos click here
4shaft shredder, Untha, RS 30 4-S 2x 11 kW, , Status: used outdated Drive: 2 x 11 KW rotor Width: 500 mm rotor diameter: 200 mm drive 2x11 Schneidwerksöffnung kW 450 mm x 560 meter waves No. 4 speed main shaft rpm about 23 speed wave addition rpm about 34 Grid hole mm 30 kg weight approximately 1,100 about throughput * 30 mm hole grid m3 / h 3 4 *) depend on: material characteristics and hole diameter grid emergency available test run on the spot est. [...Technical data truncated] AD-ID: A448719 More Infos click here
