Briquetting Press, muetek Systemtechnik, MPP 60 -VORFÜHRMASCHINE -, Output 30-60 kg/h
depending on Material
Biquett Ø 50 mm
bin with capacity of 1m³ with auger
Hydrauliksystem with oiltank 110 liter
pump 5,5 kW / 40 Liter
Dimension 1680x1100x1500 mm lxbxh
Weight 680 KG , AD-ID: A452959 More Infos click here
Parquet edge grinding machine fG taifun, FG, Taifun, 2.1 KW, changeable resolution (120/330 mm), stepless number of revolutions, exhibition machine, never used, top-condition…now for only , AD-ID: A90289 More Infos click here
Parquet grinding machine fG Hurrican, FG, Hurrican, weight 70 kg., 200 mm sharpening width, grinding length 750 mm, suction system, 2.5 KW, exhibition machine, never run before, top-condition…now for only , AD-ID: A90288 More Infos click here
Elevating truck platform, , , , stroke load 2.5 tons. Fork length 1100 mm
of vertical lift of 198 mm of tandem roles fork distance inside 230 mm
fork external dimensions 560 mm weight 80 kg - n e u - AD-ID: A101414 More Infos click here
Corner finery automat SAM 90/NC, Thorwesten, , , Technical description: For each profile programmable. Each customer is completely independent of the profile and can add or also change each of time immediately new profiles. Complete processing of all profiles (wing, window frame, entry door, liftingpush etc.) Automatic profile recognition of all profiles Only one milling disk for all profiles (no profile-referred milling tools) 1000 profile storage locations with complete treatment Completely free, simple Selbstprogrammierung by the operator. Drive of the numerical control axles over brushless three-phase alternating current of servo engines with rotation givers (no coals, no rotation transducers). Speed of each work procedure adjustable Expandable with automatic turning device, up to the fully automatic production run Komplattbearbeitungszeit (with automatic turning device) for each framework = 1.5 - 2.2 min. (dependently of the kind of the treatment) With each usual market 4 - independently to concatenate corner welding machine. Machine profile system: - Hoechste dimensional accuracy - rotating, did not forgive or a rejecting, since absolutely no metal welds take place - individual completely variable expandable modular building block principle Milling disk: - Only one milling disk for all profiles - over numerical control axles (x and y axis) programming bar (smallest programming = 1/10 mm) - individual ones bevels can problem-free are programmed. Profile recognition: - Automatic profile recognition of all profiles - automatic scanning of the inserted Profile in 1/10 mm - steps (width/height) Schattennut Stechmesser/Innenmesser: - With HSS cut (turret plate) - Buendige Stechmesser for decoration profiles or Acrylic coating - crease internal angles and/or glass border admission angle also as bevel completely to work. Lower/upper drilling milling aggregate: - Fuer gasket grooves and seals surfaces more ueber Numerical control axles (x and y axis) programmable (smallest programming = 1/10 mm) - shark cutter TIN coated - drive by high-speed electrical engines (= hoehere and even force uebertragung) Sealing surface Stecheinrichtung: - Stinging the window frames - seals surfaces by scanning - optimal treatment (no milling movements) Corner adjustment: - Optimal adjustment of the Profilwinkels in the hitting a corner finery automat Turning device: - Standard max. framework size 2,500 x 2,500 mm (other sizes on request) - with Vorpuffer and/or Nachpuffer - also be enough, narrow frameworks (e.g. 2,500 x 500 mm) Entry doors and frameworks with einge schweisstem Kaempfer become problem-free works on automatically. Transport at the turning device: - Two transportation units (and guidance) - speeds of ueber frequency changers adjustable. AD-ID: A209160 More Infos click here
Glassing stand, Federhenn, Worker (17934), , uses make Federhenn type Worker length 3000 mm broad 500 mm height 1700 mm stock location 97447 Gerolzhofen all data without guarantee! AD-ID: A308872 More Infos click here
Device assembly fixture , Grass, ZM6-P, , pneumatic clamping
device for the furniture industry operation by foot pedal AD-ID: A368460 More Infos click here
Funierklebemaschine , Musterbau, , , well received veneer sticking machine of
building of samples. Discharge: 900mm of far data stand on the vehicle
identification plate see picture. The upper haltearm does not
participate in the photo, but! Partner Mr. Hossbach AD-ID: A363083 More Infos click here
Mitre stamping machine , , Gehrungsstanze, , HR-REF-666 Kind of machine: Mitre stamping machine Year of construction: unknown Basic dimensions approx.: - L = 2,050 mm - B = 600 mm - H = 1,100 mm Weight approx.: 120 kg Other: massif rack with extended edition Condition: fully operationally Price: 300, - euros plus VAT. Location: Region Herford Dismantling, loading and transport: Dismantling, loading and transport are task of the buyer. The commodity stands in a ebenerdigen resounds ready for the collection. Shipping equipment is locally only present after arrangement, can be used however then. The loading happens on danger of the buyer. The trading firm Ravensberg organizes if necessary the loading and/or the transport of the commodity debited to the buyer. Freight charges should let you calculate to your orientation by a feeder in your proximity. AD-ID: A376623 More Infos click here
Hydraulic elevating truck platfo, , 2 to, Hubhoehe ~120 mm, allseitig fahrbar, 2 tons, vertical lift of ~120 mm, moves in all directiones, mobile, built approx. 2002, steer axle lock, new condition..., AD-ID: A235119 More Infos click here
Holzspalter proffessionell, Diemer GmbH, DRSP 40-150, , Round timber gap machine to splitting round timbers with a diameter of max, 400 mm and a length of max. 1500 mm of cross gap measurers from special steel with elevator adjustment AD-ID: A211912 More Infos click here
MOSAIC PARQUET MACHINE, BAUWERK, P5, 'BAUWERK' mod. P5 - SPECIAL COMBINED MACHINE mod. P5 FOR THE PRODUCTION OF MOSAIC and INDUSTRIAL PARQUET SLATS
including:
n.1 CROSSCUTTING UNIT with fixed measure
n.1 PLANING UNIT on 2 sides
n.1 MULTIBLADE UNIT
Dimensions of the raw slats:
Max length: up to 1000mm
Max width: up to 200mm
Max thickness: up to 32mm
Dimensions of the processed slats: Max length: 160mm
Max width: adjustable up to 25mm
Max thickness: adjustable up to 20mm
Motor powers:
Motor for operating the working units: 25HP (18,4kW)
Motor for rotating the drum: 0,4HP (0,3kW)
2-speed drum rotation:
1st speed = 10rpm
2nd speed = 17rpm
Production capacity: with 17rpm = approx 25/30 sqm/hr, with slats of 160x24x8mm
SECOND-HAND, RECONDITIONED MACHINE,
including 1 set of tools on the machines.
, AD-ID: A354565 More Infos click here
Vacuum workbenches, , , - 2 pads
- 1. pad round, diameter 200 mm
- 2. pad L x W: 270 x 85 mm
- working height 850 mm, AD-ID: A436335 More Infos click here
Board caper automat, Schiele, Junior VM Junior 300/150/8, , Year of construction: 1987 with 8 rollers work width 300mm the machine are mobile in TOP condition. AD-ID: A196914 More Infos click here
Flex flounder lifting platform, , , , Shears elevating platform Laenge 2000 mm broad 500 mm of vertical lift 800 mm of Bauhhoehe 80 mm AD-ID: A291565 More Infos click here
Lifting platform, , , , Disk size 2580 x 860 mm max. load 2.0 t Aufbauhoehe 330 mm with developed roller race role division 200 mm constructed Schwerlastrollen Fusssteuerung pneumatic brake of the roles over foot switches Machine again-paints and functional AD-ID: A211454 More Infos click here
Umfaelzautomat, Gubisch, UFA-4-S (18027), , uses make Gubisch type UFA-4-S year of construction 1983 machine. - No. 4451 number of spindles 4 pcs. engine 7.5/7.5/7.5/7.5 KW without stroke/dips stretching height approx. 140 mm of glass border from cutting-off saw 3.0 KW feed motion with 8 roles feed motion steplessly 5-30 m table length approx. 4000 mm of framework edition Gegenanlage for forming suction connection 4 x 140/1 x 80 mm space requirement approx. 4000 x 1300 mm weight approx. 1850 kg stock location 97447 Gerolzhofen all data without guarantee! AD-ID: A317748 More Infos click here
Perforation machine , SCHIELE, PERFO (060250), , Year of construction 1979 work width 300mm Arbeitshoehe 200mm machine mass: LxBxH 1300x800x1400mm machine is in TOP condition AD-ID: A384069 More Infos click here
End cutting, drilling and dowelling machine, KOCH, SBD-B-UNIVERSAL / BL-25, Double sided machine for end cutting, drilling and dowelinserting with swiveling and tilting units, as well as drilling from top and along
Workpiece length: 300 - 2500 mm, at 90° Workpiece width: 30 - 140 mm, at 90°
Workpiece thickness: 15 - 50 mm, at 90°
Fixed side at the left
infeed height 800 mm
Hopperfeed at the infeed, automatic return system underneath the operating units
Transport by double chain with dogs, operation cyclewise
Equipment each side for the ends:
- Cutting station: Saw unit with vertical stroke of 100 mm., motor 2,2 kW, 6000 r/min,
swivelling +45° / -30°, tilting + 45° / - 20° - Drilling station, pneumatic stroke, drilling block with 5 spindles, centers 22 mm, swivelling +45° / -30°, tilting + 45° / - 20° - Dowel inserting station: 3 inserters, unit swivelling +45° / -30°, tilting + 45° / - 20°
Vertical drilling:
- 4 units bridge mounted, adjustable over the machine width and in height, each with 5-spindle drilling block, 22 mm centers
Horizontal drilling in the long side from the rear (machine BL25 connected to the SBD)
- 2 Drilling units, adjustable over the machine width, 5 spindle drilling blocks, 22 mm centers
- The pieces are pushed by pneumatic cylinders onto the table, after the drilling this table tilts so that the pieces fall by gravity onto 2 conveyors bringing them to the operator in the front, AD-ID: A455138 More Infos click here
mitring machine, Grum-Schwensen, MOD 1, table 1.100 mm x 100 mm
cutting width approx. 100 mm
cutting depth approx. 100 mm
material thickness approx. 30 mm
working hight approx. 850 mm
- length-stop with mitre-stop and guide system
- horizontal lateral adjustment with grid-stop
for notching wide strips
- 2 adjustable angular stops 45°- 90° degrees
- food handling
Professional Holzspalter mobile , , , , Gebr.
Holzspalter professional equipment max pressure 100 tons. It can be
split wood by a length of max. 80 cm and a diameter of approx.. 100
cm. Hydraulics propelled by 2 cylinders a Deutz diesel engine, which
is equipped with an electrical fuel preliminary heating. The machine
can work manually and automatically. The spalter is secured in the
work area with light barriers. Partner Mr. Hossbach AD-ID: A403511 More Infos click here
Press for connection of chair seat legs of a chair , Maschinenbau Loescher, , , press liaison chair seat chair legs Manufacturer: engineering extinguisher Neuhausen * Built: 1980 * Drive: hydraulic * Dimensions: wxdxh 1200 x 1000 x 1800 mm * Status: * A related operational Special drilling machine for chair seats (Baürnstühle) can be found here. Net price (from site): 300.00 AD-ID: A404236 More Infos click here
1st station:
The cut-off saw cuts the rough-cut battens into blocks which drop down a chute on to the belt conveyor
01 AUTOMATIC MULTIPLE CUT-OFF SAW WITH
ROTATING DRUM, mod. P 140
Number of clamping stations 10 x 4
Capacity in blocks per minute 148 to 120
Motor power feed HP 3
saws HP 10 x 2
01 BELT CONVEYOR, mod. P 146, approximately mt.9 long, to convey the little blocks from the P 140 to the P 141 / P 142
Belt speed 20,5 mt/min.
Motor rating HP 2
2nd station:
The blocks are stacked manually in the magazine of the 2-side planer and inspected for faults. The surface planing units determine the exact thickness.
The unworked blocks travel back to the 2-side planer through the belt conveyor and the return belt conveyor.
02 AUTOMATIC 2-SIDE PLANERS, mod. P 141
Number of clamping stations 10-12 for each machine - Capacity in blocks per minute 60-84 for each machine
Motor power (for each m/c) feed HP 4
planer HP 10 x 2
3rd station:
The trim ends are sorted out at this inspection station. The blocks are automatically fed into the multiple saw unit to be cut into slats before they drop onto the belt conveyor.
02 AUTOMATIC MULTIPLE SLAT SAWS, mod. P 142
Number of clamping stations 10-12 for each machine - Capacity in blocks per minute 60-84 for each machine
Motor power (for each m/c) feed HP 3
MULTI RIP SAW HP 30
01 BELT CONVEYOR, mod. P 148, approximately mt.1,5-2 long, for the passage and return of the unworked blocks
Belt speed 28,5 mt/min.
Motor rating HP 0,35
01 BELT CONVEYOR, mod. P147, approximately mt.6 long, for taking back the unworked blocks to the P 141 / P 142
Belt speed 21 mt/min
Motor rating HP 1
01 BELT CONVEYOR, mod. P 148, approximately mt.1,5-2 long, for taking back the unworked elements to the conveyor P 146
Belt speed 28,5 mt/min
Motor rating HP 0,35
01 BELT CONVEYOR, mod. P 145, approximately mt.3 long, to convey the slats to the grading conveyor P 135.
Belt speed 22,5 mt/min.
Motor rating HP 0,5 4th station:
The slats are sorted manually in the quality channels and automatically stacked in the cannisters.
01 GRADING CONVEYORS, mod, P 135 with 3 runners to grade the slats into 3 grades and with 3 automatic stacking units to stack the graded slats into metal boxes (cannisters).
Overall length mt.9 ca.
Output per hour 70-90 m²
Belt speed 7,5-21 mt/min, step switching
Motor rating HP 1 5th station:
The slats are taken from the ejector stand by the special clamps and placed in the magazine tower of the automatic assembly and glueing machine and later made up into tiles and glued together on the bottom surface by thermoplastic webbing. Plant daily production 800 m² in 8 working hours.
02 EJECTOR STANDS + N.4 MANUAL SLAT CLAMPS
200 STACKING BOXES (CANNISTERS)
01 AUTOMATIC ASSEMBLY AND GLUEING MACHINE, mod. P 137, with thermoplastic net, to compose and assemble the slats in square or rectangular panels, in a mesure ready to be used.
PLANT COMPOSED OF SECOND-HAND MACHINES,IN VERY GOOD CONDITIONS
Mitre and Sprossenstanze , Morsoe, FC, , with foot operation, skiable longitudinal attitude, measure scale, attacks on the left and on the right the cutter head 45,-90 adjustable, verstellabren editions for Falzprofile, locking screw with locking lever and attack ruler for rung cuts, 1 set of mitre measurers and 1 set of rung measurers with neck widths 10.12.14.16 and 18 mm, work width max. 100 mm, work height max. 160 mm, cut in cross section max. 65/65 mm, measure scale up to 1500 mm AD-ID: A439828 More Infos click here
Sweeping machine, manually hand-operated, WAP/ALTO, Kehrmaschine, manuell handbetrieben, ,
sweeping machine, manually hand-operated, year of construction 2004,
new Top - condition. AD-ID: A239098 More Infos click here
Round timber sort , Bezner, Mi-OH, , A short wood sort of the mark Bezner (Mi-OH) is sold you in a round timber milling plant was used and now is not to no more needed. The machine is dismantled and can be shipped. We do not give on used devices warranty and Gewaehrleistung.Ein to conversion or a Ruecknahme are impossible. Search words: Round bar milling cutter Palisadenfraese round timber milling cutter round timber introduction excerpt mills transverse promoter sort bark peeling round timber place filling. AD-ID: A394422 More Infos click here
MAPO FINIERMASCHINE , MAPO, SPU 180, , work width 250 mm work height 180 mm
engine 1.5 KW machine weight approx.. 600 kg of driving mechanism AD-ID: A372579 More Infos click here
WOOD LEADER PRODUCTION , , , , consisting of: - MAKA lifting machine with 12 aggregates - press for the assembly of the rungs and longeron changing - GNOEVENAGEL tap saw for the production of the rungs - wedge saw for rungs - WIGO Kettenstemmer pneumatically The manufacturing is in good condition. AD-ID: A437100 More Infos click here
Picture frame corners stamping machine , Schleicher Casese , Modell 850, , the machine is new from a
Konkursasse of a framework manufacturer at the Niederrhein. There the
machine never was in the use. It served only as emergency machine and
was located in the magazine. Machines NR. 914 AD-ID: A381105 More Infos click here
Fensterwerkzeugsatz, Stehle, JV 56 (16633), , made of school enterprise, very little used festbestueckt HSS, 11-teilig, wing slot wing tap window frame slot window frame tap upright above window frame tap upright down longitudinal section wing inside wings outside wings outside down, water nose window frame inside upright and crosswise above window frames inside down crosswise AD-ID: A248259 More Infos click here
Fruit and vegetable crate production, Corali / Speckboetel, , , consisting of: 1 pieces of Corali M76 broad execution for ground and headings with 5 Heftkoepfen max. pass band 1140 mm; max. form width 1020 mm; max. booklet distance in the width 960 mm; Attaching per minute of 80/180; Engine performance 2.0 HP; 1 pieces of Corali M75 table and carriage execution for framework assembly work width 850 mm; Work-hear 500 mm; Work length 600 mm; Booklet speed until 200 attaching/minute; 6 pieces of Speckboetel wire stapler VHD-K in this execution serve the machine primarily for the economic nailing and attaching of small lists. It forms automatically Doppelnaegel with 8mm back and adjustable leg lengths of 11-23mm out of round booklet wire. For basting duenner cover borders on can be inserted Klin, which rolls the double drive pin tips up urgent by the wood. Discharge: 300 mm; Table adjustment: to 500mm depth; Booklet speed until 180 attaching/minute AD-ID: A258838 More Infos click here
mitre punch, Schleicher, F 7 (18170), used
top condition
manufactured by Schleicher
type F 7
built in 1980
mach. No. 7722
guide fence right 750 mm
foot-operated
located in 97447 Gerolzhofen
No responsibility is taken for the correctness of this information! , AD-ID: A323302 More Infos click here
mitre punch, Schleicher, (18570), used
manufactured by Schleicher
type F 7
incl. right and left
extented table
foot operation
located in 97447 Gerolzhofen
No responsibility is taken for the correctness of this information!, AD-ID: A347193 More Infos click here
Shrinking plant , Kuper, , , intake volume, coating station, conveyor, tunnel, overall length 14,100 mm, max. foil width 1,600 mm, max. work width 1,200 mm, max. work height 400 mm, with foil crane AD-ID: A330960 More Infos click here
Hymmen a measurer adding shears AS 280, Hymmen, AS 280, , 2800 mm of kerf width
electrical tiefenanschlag approx.. 800 mm of cutting height approx.
80mm light barrier safety device and 2 manual controls, AD-ID: A314246 More Infos click here
Blower , Siemens, Schuckei, , engine data: 380V; 1,85A; 0,88PS; cos:
0,6; 60 Per/s; 965 U/min. Mass (LxBxH): 500 x 600 x 900 mm AD-ID: A342703 More Infos click here
Sharp equipment for cup steel, , , , equipped with bosch Schleifer type: 1210 engine data: 500 W; 2700 rpm. Weight: 13 kg of dispatch mass: L 250 x 230 x 220 mm AD-ID: A273555 More Infos click here
Diesel set , MONHOFF, DM 330 HD Silent Power, , generator set 330 KVA engine Deutz BF6M 10150 generator
Marelli M7B 315SB4 with heat recovery aggregate 14,615 operation hours
generator storage again in June 2002 AD-ID: A357605 More Infos click here
Werkzeugwagen for carpenters Ulmia Ott, Ulmia Ott Stabila, -, ,
werkzeugwagen with Stecheisen plane spirit level ideal for carpenters
of the werkzeugkoffer can rausgenommen to become AD-ID: A322801 More Infos click here
Tool cupboard cabinet for tool, Ulmia Ott, -, , tool cupboard ideal for carpenter
with tool mass of the cabinet 940mm breit1220 highly 320 mm deeply AD-ID: A322810 More Infos click here
Mitre building up machine , V. Grum-Schwensen, Puhlmatic 2050, , Mitre composition machine with high frequency to building up mitres by means of Weissleim AD-ID: A376413 More Infos click here
Angle workbench folding table , -, -, , -dimensional approximately 4000 x 1200 mm pneumatically-operated with 8-pneumatic cylinders on stable mobile base AD-ID: A396362 More Infos click here
Hydraulics Holzspalter , BGU, HS 90 1, , BGU hydraulics Holzspalter HS 90 - 1 -
larva in Germany easily uses - in customer switching year of
construction 2002, 1 year warranty AD-ID: A366267 More Infos click here
working plattform, BLUELIFT, R 12 CAT - Hybrid, built in 2007, 2 engines hybrid-system, 13 hp Honda (gasoline) and 220 Volt electric, working height max. 12 m, working range max. 7 m, max. cage weight 200 kg, outrigger wide 2,9 m, total weight 1.920 kg, catapillar crawler works perfect outdoor, max. gradeability 28%, articulated telescopic system, full hydraulic system, extreme compact, new condition…, AD-ID: A321452 More Infos click here
Fork-lift truck , HYSTER, TYP H1 ,75 XM, , Gas stacker 1.8 Tonner UVV again to 5/2008 oil change and transmission oil changing 5/2007 implemented. The stacker is immediately operationally vertical lift 3700 mm of overall height 2200 mm stroke stand standard fork carrier width 1050 mm of fork length 1500 mm of tyre SE front and back window with windshield wiper Seitenschieber work headlight, turn signal, stop lights, back-up lights of good ones condition AD-ID: A331220 More Infos click here
Wood industry software , Kuhnle, Einsteigerversion, , Kuhnle wood branch software a riser version consisting of: -- Documentation file -- Installation guidance -- 2 program CD s -- 1 license disk -- 1 Dongle this software is more ueber because of a firm fusing. Ex-factory price 2554,00 AD-ID: A437227 More Infos click here
BAUMANN side stacker , Baumann, AS 40, , piston force: 4 t platform: 1.20 m fork
length: 1.20 m vertical lift: 4 m platform height: 0.70 m overall
height: 2.83 m total width: 1.93 m overall length: 4.40 m dead weight:
5400 kg of Diesel Perkinsmotor light-pack full rubber tires AD-ID: A424397 More Infos click here
Compressed air tank , , mit Ruehrwerk, , Contents of approx. 48 litres permissible operating positive pressure 4 bar AD-ID: A356614 More Infos click here
Falcioni border squirting race , Falconi , , , consisting of: 2 Falcioni spraying
machines type LSM 70-30 year of construction 1994 consisting of: -
pickling spraying machine - intermediate volume with 300 or 600 mm
work width of transportation volumes in the in and discharge as well
as pinchrolls within the spraying range 6 pistols and 6 narrow basins
dry filters and exhaust fan technical data:
--------------------------- Transportation speed: 1,5 - 110 mt/min.
Exhaust air fan: 1.2 KW - 4000 mc/h connected load: 2.2 KW feed
motion: 22 - 110 m/min. Machine size: 3805 x 1690 x 1750 mm of partial
length min.: 400 mm weight: approx.. 900 kg of lacquer finish: in
series: light-grey ral 7035 deaf-blue ral 5014 2 Rippert
Abdunstwaende AD-ID: A358861 More Infos click here
Vacuum - lifting device, GIS, Vacujet, - ultimate load 250 kg
- with 2 picker arm 1500 x 200 mm
- with wall derrick, nosing 3700 mm
- price for reconditioned machine (Price in current condition 1'350.00 EUR), AD-ID: A358453 More Infos click here
Packaging installation , Fabr.: Fischer, Typ: SFV 80 N, , Work width: max. 300 mm work height: max. 12 - 180 mm speed: max. 40 m/min completely with contraction channel AD-ID: A357015 More Infos click here
ROLLER-TYPE SHUTTER CUTTING MACHINE , JOSTING, RS 1300, , Work width 1280 mm plate thickness 5 - 11mm of 3 feed wheels fuer border width 6 - 16 mm of flow velocity of 42 cuts per minute of engine performance 2 HP of compressed air 6 bar of machine mass, which can be cut: 1950 x 1100 x 1350 mm weight: 780 kg AD-ID: A380975 More Infos click here
Vorheizstation mineral materials , ELKOM, Mikutherm - Optimal, , Neuwertige Vorheizstation for mineral materials and thermoplastics. According to the previous year in only 1 of samples used, then no longer needed. The economic, safe and materialschonende possibility mineral materials or thermoplastics for subsequent deformations to be tempered. The material will have a smooth ball-bearing drawer loading and unloading. Pneumatic thickness adjustment with short [...Technical data truncated] AD-ID: A448048 More Infos click here
Moulder, WEINIG, PROFIMAT 23, Capacity 230 x 130 mm
Spindles: 4
- Bottom 4 kW
- Fence / near 5,5 kW - Top 4 kW
Variable feed speed (5-24m/min)
All spindles with automatic star-delta switches
Length infeedtable 1400 mm
Motorised thickness adjustment
All spindles with mech/dig readout
Pneumatic pressures
4 dust extractions outlets Ø130 mm
Tersa cutterblocks
Total power installed: 17 kW, AD-ID: A452756 More Infos click here
Laminate flooring line, BARGSTEDT - ISE - HOMAG, FL 10/05/II+500 - TW - FL 20/06/15, Flooring panels length: 800 to 1300 mm.
Width: 185 to 220 mm.
Thickness: 7 to 12 mm.
Line consisting of:
Bargstedt Stack roller conveyor Bargstedt Vacuum-feeder
ISE Multi-ripsaw with automatic panel alignment according the figure
(year 2002), pass up to ca. 2,20 m.
Panel separator and cross conveyor
Angular transfer and infeed in
1st pass tongue and groove machine Homag, FL 10/05/II+500
Fixed side at the left
Single chain in order to machine 85 mm. wide pieces
Feed speed up to 60 m/min
Fence adjustement 185 to 220 mm.
Infeed chain machine II + 500 mm.
Equipment per side:
4+4 Shaper 4,5 kW, 100 Hz, 6000 r/min., 180° tilting
1+1 Cleaning blower
Machine equiped with precision-support-shoes at each motor Angular transfer Homag TW (to the left)
Intermediate magazine M II buffering and aligning the pieces
2nd pass tongue and groove machine Homag, FL 20/06/15
Fixed side at the left Double chain allowing widths from 220 mm to 1500 mm., dogs for thicknesses from 7 mm. onwards
Equipment per side:
5+5 Shaper 4,5 kW, 100 Hz, 6000 r/min., 180° tilting
1+1 Cleaning blower
Machine equiped with precision-support-shoes at each motor, AD-ID: A433329 More Infos click here
, Scheer Fraese , Rundboegenfraese , , With Scheer hand router, gun attack for various depth adjustments, consisting of 2 parts to interconnect, maximum radius approx. 350cm leave themselves round sheet milling equipment AD-ID: A417768 More Infos click here
Order for fusion adhesive , SLAUTTERBACK, KB20E, , Year of construction 1995 tension 230 V achievement: 1400 W tank capacity: 9.1 kg of Arbeitstemparatur: 37 - 230 degrees operating pressure 10.34 kPa (500 psi) preheating time 30 - 450 min. machine weight: 40 kg AD-ID: A385131 More Infos click here
Three-side peg hole drill press , Scheer, , , Three pages fixing hole drilling machine, Fa.Scheer, working length (without margins): 2500 mm, the largest Einspannstärke piece of work: 50 mm, engine: completely closed, protection: P 44, AC: 220/380 V , Feed the drill spindle by compressed air, speed: 2780 rpm; space Height: 2.0 m, length: 3.7 m, depth: 1.3 m; Net weight: 490 kg, used as Fig AD-ID: A391745 More Infos click here
Kity machine table , Kity, 612,652,660,661,616,652,626,635,695, , Kity machine table with the following devices: Engine circular saw 616 grinding machine 652 milling cutter of 626 planes 635 belt saw with stand 612.652 Drechselbank with stand 660.661 withdrawal system of 695 accessories the devices various with new filter all koennen with an engine to be operated. AD-ID: A405263 More Infos click here
Machine sales from a furniture factory , , , , From the dissolution of a furniture factory, we can offer the following machines: - CNC Morbidelli U 26 - Tischfräse Bäürle SFM - format saw Altendorf F 45 - Abrichter Scholz - Batch drill Scheer DB 16 - number of drill Scheer - Doppelablängsäge Hüllhorst - Kantenanleimer Homag KL 78/QA - pendulum saw Bäürle PKS - band saw Scholz B8R - Absaugrohrsystem - Long-band grinding Hymmen - Kettenfräse Haff [...Technical data truncated] AD-ID: A451686 More Infos click here
To stretch Grothefeld winkelgetriebe , Grothefeld, , , with angle adjustment and the possibility of a drill or milling in addition to tension. AD-ID: A399730 More Infos click here
Holzspalter with crane mobilely , Weyhausen, , , Gebr. Holzspalter approx.. 30
tons of Druckraft with gap cross and crane up to 800 kg of lifting
achievement. The Hydraulick is propelled over the cardan shaft.
Partner Mr. Hossbach AD-ID: A403543 More Infos click here
Impregnation soaking work , Scharf, , , 12.0 m long, 1.25 m broad, 1.55
hoch(Innenmasse), stroke rack with elektrohydr. Drive, max. Maximum
stress 8 tons, einwandig, handsteered, TUEV examined statics, steel
catch pan for angeb. Soaking work with 100iger admission of the
soaking volume, heating for winter operation AD-ID: A423638 More Infos click here
Becker vaccum pump , Becker , , , VT 3,40 year of construction 1993 related to
inlet state 900 mbar abs. Litre achievement 40 m /min engine rated
output of ges ca.1,2 KW of engine power output inclusive. Exhaust with
suction beginning 17.2 KW of engine speed 1420U/min kind of protective
relay for motor IP 55 operating voltage/frequency 400 V 50 cycles per
second AD-ID: A409847 More Infos click here
Rietschle vaccum pump , Rietschle , VTF 250 (01), , related to inlet state 100 mbar abs.
Literleistund 250 m /min engine rated output 7.5 KW of engine power
output inclusive. Exhaust with suction beginning 17.2 KW of engine
speed 1450U/min kind of protective relay for motor IP 55 operating
voltage/frequency 400 V 50 cycles per second AD-ID: A409852 More Infos click here
Tending magazine , Weinig, EM 2, , tending magazine EM 2 pieces for different length working width to 200 mm height from 6 mm Feed 3 hp motor speed adjustable from 6 to 30 m / min With connection to the table Kehl machine catchment disc 15 mm Teleskopgefederte leadership rollers cleaned and funktionsgeprüft AD-ID: A451513 More Infos click here
Hordenwagen , -, L/B/H 1700/920/1950 mm, , width 1700 mm of depth 920
mm height of 1950 mm of Armlaenge 600 mm distance of arms 110 mm
approx.. 30 pieces available AD-ID: A423774 More Infos click here
Briquett packaging machine , muetek Systemtechnik , MVZ 135 II -VORFÜHRMASCHINE-, , packaging machine for briquettes and Schrumpffolienbanderollierer Shrink package dimensions 280 x 300 x 140 mm package weighing 8 to 10 kg The facility consists of the following components: - Schrumpfolienbanderollierer with Schweissbügel - Impulsschweisssystem with adjustable welding and cooling - Siegelprofilschweisssystem for PE my films to 80 -- Infeed roller Going to the piece task - role in the course Schweissstation - Schrump [...Technical data truncated] AD-ID: A453185 More Infos click here
Machine sale from D. Dissolution e.Holzwerkstatt , , , , - Format circular saw - pendulum saw PS50 - belt saw BS 1310 - three-since final evil hole drill press - Bandschleifer - Kantenschleifer - Langbandschleifer - Druckluftnagler - Dekupiersaege - upper/edge milling cutter - hand edge glue equipment and various small articles AD-ID: A437716 More Infos click here
Heating system 1.2 & 3.5 MW , , , , heating system approx. 1200KW 1993
heating system approx. 3500KW 1984 completely with control expansion
tanks with integrated unterschubfeuerung for the burn of wood chips
four-course steel boiler with senkrechten heating surfaces for the
optimal use of the verbrennungsenergie AD-ID: A425701 More Infos click here
Hand rail milling head , Leitz, WE 500 1 50, , Profilcut hand-drive stuff, inserts, teeth number 2, used for Tischfräse (possibly with start-Ring, BG-Test-No. 032-052, Fräshöhe 55 mm Omega profile, bore 30 mm, used for a job AD-ID: A429721 More Infos click here
Verstellnuter , Leitz, R 1475 W 10, , Verstellnuter, 250 mm in diameter, 30 mm bore from 10.2 - 20 mm disc with adjustable allowance, BG test TO 3140, HMN AD-ID: A429726 More Infos click here
Glue joint cutter , Leitz, Sonderanfertigung, , Verleimfräser for selbsthemmende Verleimfuge, Leitz make custom-made, to 65 mm wooden strength, bore 30 mm AD-ID: A429727 More Infos click here
cleaning machine, ERNST, BM 2, For cleaning of workpieces from overspray after lamination
Working width 900 mm
With 2 roller brushes inclined
Quick change of rollers brushes in approx. 5 minutes
Workpiece thickness 3 – 90 mm
Truning speed of brushes infinitely variable 250 – 1.500 rpm
Autom. Transport belt control
Ozillation of brushes 40 mm, AD-ID: A429942 More Infos click here
Conveyor , Raimann, , , Return volume of a Raimann many sheet saw. Length 7000 mm broad 500 mm of feed speed 12 m/min with 4 wheels and elevatoradjustable year of construction: 2003 AD-ID: A439037 More Infos click here
Dowel-hole and line-boring line, BIESSE, TECHNO FDT, Feed through line: Yes; Horizontal boring supports: 2; Boring supports bottom-up: 7; Boring beams per support: 2; Boring spindles per support: 11; Working width max mm: 3.200; Thickness max mm: 65; Main motor kW: 1,7; Boring beams 90° pivotable: Yes; Horizontal boring on both sides: Yes; Boring bea, AD-ID: A440785 More Infos click here
Dowel-hole and line-boring line, BIESSE, TECHNO FDT, Feed through line: Yes; Horizontal boring supports: 2; Boring supports bottom-up: 7; Boring beams per support: 2; Boring spindles per support: 11; Working width max mm: 3.200; Thickness max mm: 65; Compressed air pressure bar: 6; Main motor kW: 1,7; Boring beams 90° pivotable: Yes; Horizontal borin, AD-ID: A440786 More Infos click here
Rack, OHRA, , Heavy duty shelf: Yes; Frame tray shelf: Yes; Throat/ depth mm: 1.000; Height mm: 4.800; Number of levels: 4; Number of supports: 3; Total length mm: 10.000; Tray width: 4.800; Number of seperations: 6; Mobile: Yes; Double sided: Yes; , AD-ID: A448820 More Infos click here
