IPC Black-Box/WB-05 CNC Controller for Measuring Machine RETROFIT, , , IPC Black-Box/WB-05 CNC Controller for RETROFIT Measuring Machine
for customer optimized retrofit of a 3D-Coordinate Measuring Machines (CMM), no matter if manual driven or CNC.
-Reliability and flexibility by well-tried and world-wide experienced software
-Spares the cost for new constructions and facilities (CMM, measuring room, environment and temperature control, a.s.o.)
3D-Coordinate Measuring Machines (CMM) represent a high investment. This is the reason why they should be in use over many years. Mostly the CMM’s are moving on air bearing, this is why they have practically no wear, opposite to the other machine tools. While in most cases the mechanics of a CMM is as good as new, especially if the CMM was serviced normally, the CNC electronics, along with the hard- and software of the evaluation system became over few years obsolete, due to the rapid pace of the technical development in electronics and computer area.
We offer with the Black-Box/WB-05 CNC Controller an optimal, economical solution of your measuring problems, shaped on your needs.
The retrofit of your existing CMM’s is a cost-effective alternative to buying a new CMM.
The efficiency of the measurements is the same as for a new machine
, AD-ID: A428884 More Infos click here
Test equipment for resistance to rubbing , Frank, Typ 11666, , test material is
moved crosswise over sandpaper; Tension material with compressed air
(small compressor Heraeus mini); Load over weights; Mains connection
380 V; as recognizable in the photo, splitting width unit a cable was
only provisionally connected to the Funtionstest (here originally
probably was clamp and/or another unknown element) AD-ID: A338079 More Infos click here
Single stand measuring center , Zeiss, SMC 6000mm lang, , Make type: Zeiss/SMC with microcomputer price increase Year of construction: 1995 (2007 of Zeiss overhauled completely) Design: Post and beam construction way on precision hard rock plate Measuring range: X = 6000mm; Y = 1350mm; Z = 2000mm Probe: Direction-independent switching probe RST for dynamic recording of measurement Control: Microcomputer control (3Achsen-Vektorsteuerung) trick, 4.und 5th axle and swivel mechanism DSE 05 Software: Holos NT version 2.8.0 Calypso version 4.6 hardware: HP work station operation: IT Dynalog P3 with Touchscreen alphanumeric control console, manual steering of measuring instrument and DSE 05 over control levers with progressive characteristic, switchable on creep speed Drives: High-dynamic direct current of servo-drives, electronically supervises Connected loads: 220V/50Hz Air supply: 6-10bar; Consumption 20Liter/min with 5bar space requirement: 7.500mm x 4.200mm Weight: 10.000kg Price on request! All data without guarantee. AD-ID: A412869 More Infos click here
Double stand measuring center , Zeiss, SMC 6000mm lang, , Make type: Zeiss/SMC with microcomputer price increase Year of construction: 1995 (2007 of Zeiss overhauled completely) Design: Post and beam construction way on precision hard rock plate Measuring range: X = 6000mm; Y = 1350mm; Z = 2000mm Probe: Direction-independent switching probe RST for dynamic recording of measurement Control: Microcomputer control (3Achsen-Vektorsteuerung) trick, 4.und 5th axle and swivel mechanism DSE 05 Software: Holos NT version 2.8.0 Calypso version 4.6 hardware: HP work station operation: IT Dynalog P3 with Touchscreen alphanumeric control console, manual steering measuring instrument and DSE 05 over control levers with progressive characteristic, switchable on creep speed Drives: High-dynamic direct current of servo-drives, electronically supervises Connected loads: 220V/50Hz Air supply: 6-10bar; Consumption 20Liter/min with 5bar space requirement: 7.500mm x 4.200mm Weight: 20.000kg Price on request! All data without guarantee. AD-ID: A412892 More Infos click here
Test field, Schuermann Elektronik Ecoair, , , for three-phase alternating current outlets
5Anschluesse for 7 KVA and 5 connections for 11 KVA, all outlets over
a/circuit breakers individually adjustably. In the test field 6
Ampermeter, to 1 tensiometer, are inserted digital displays for
current measurement, power factor measurement and power measurement AD-ID: A121858 More Infos click here
Measuring machine/scribe and drill machine StiefelmayerC manually , , , , Stiefelmayer C manually X2400 Y1200 Z1000 as marking out or measuring machine price: 5.900, 00 zzgl transport + installation optionally against surcharge to it available: Measuring counter of fuer Wegmesssysteme. AD-ID: A412938 More Infos click here
Three-phase current supply simulator , Spitzenberger&Spieß, Typ 3000/C, , Three-phase current supply equipment from Forschungsinstitut, Bj. does not admit; 3000 VA; e.g. contains tension modulator, distortion factor simulator, phase control panel, oscillator; Mass approx. 180 x 90 cm; Weight approx. 300 kg; Data to function and condition not moeglich (at one of the three achievement amplifiers in the case of transport 2 plug contacts broke off); Documents missing AD-ID: A365916 More Infos click here
Balance, plattformwaage, Tewes, bis ca. 10.000 Kg, mit Digitalanzeige, , to approx..
10,000 kg of platform size L/B/H 4000/1250/565 mm with 2 digital
displays not calibratable with 4 pieces of Tewe force receivers AD-ID: A219574 More Infos click here
Digital displays, ACU-RITE, , , various counters - Acu
Rite/Anilam/Heidenhain/Fagor RSF of yardsticks use/examined at camps.
Ask for the following data - type of machine/max the one which can be
proceeded - messwege. Service repair new installations inexpensive
offers AD-ID: A183640 More Infos click here
Measuring Machine, STIEFELMAYER, , Measuring Machine
STIEFELMAYER, new 1987
Workrange: 4000 x 1200 x 1800 mm, Table 4000 x 2000.
1 Unit, Probe, PC
, AD-ID: A316240 More Infos click here
Optical precision - dividing head , Leitz, , , excerpt from the operating
instructions: The dividing head is suitably installed for measuring
teeth of the most diverse kind, index plates, cam shafts, screw
pillars, snails, cam discs, circling hurrying with arbitrary
intervals... on a face plate of the dividing head can building groups
for angledependent functions be examined... In connection with its own
driving motor it can be used further for the treatment of small
precision parts. Scope of supply as represented in the photos:
Dividing head with dreibackenfutter 160 mm, drive unit, alignable
checking block, grundbett I (overall length 135 cm), underframe, div.
Small articles price as per calculation of 19.2.1970: net so far I it
to determine the equipment knew, is intact 25,988 DM, without
recognizable damage, however the bed points for lack of care approach
of rust to (to remove, I rather leave to a specialist) AD-ID: A406334 More Infos click here
Measuring machine, MAXI CHECK, , , work area: X: 3,050 mm Y: 1,325 mm Z: 1,000
mm total weight: 2,500 kg of larva in: England AD-ID: A292142 More Infos click here
Profilprojektor , MITUTOYO, PJ 250 B, , with Aufllicht and transmitted light
enlargement 1: 10 projection ground-glass plate 250 mm kreuztisch 150
x 150 mm table at height of adjustably 100 mm table way along 25 mm
crosswise 25 mm of operating voltage 220 V of external dimensions:
Width 450 mm of depth 600 mm height of 800 mm weight approx.. 50 kg AD-ID: A415163 More Infos click here
Coordinate Measuring Machine , ZEISS, WMM 850, table length 2100 mm ,
table width 1000 mm ,
daylight mm ,
measuring range X-axis 850 mm ,
measuring range Y-axis 1200 mm ,
measuring range Z-axis 600 mm ,
weight 4 t ,
Additional Information:
CNC controlled, bridge-type coordinate measuring machine with Zeiss touch trigger stylus changing probe. The machine's strengths are its sturdy design and high reliability. It is particularly suited for simple measuring tasks on the shop-floor., AD-ID: A359660 More Infos click here
3D coordinate measuring machine , DEA, IOTA DIAMOND 0101 CNC, , 1.DEA-IOTA: DIAMOND 0101 measuring range: X = 590 mm Y = 590 mm Z = 440 mm Design: Portal building method Dimensions length = approx. 1,500 mm Width = approx. 1,200 mm Height = approx. 2,800 mm weight/KMG: approx. 3 t Positioning uncertainty 1: +4.0 m Positioning uncertainty 3: +4.5 m Maximum table load: 1,000 kg Compressed air feed circuit: Minimum air pressure 5 bar, consumption approx. 150 Nl/min Electrical connection: 220V/50 to 60HZ Environment temp. : 20 C + 3 C 2.Rechner: PC with printer after newest state of the art 3.Software Quindos with the program modules Basis Form and position tolerances Statistics Basis Diagram Ball disk monitoring Inclusive installation 4.Verpackung, transport, insurance after expenditure The measuring machine is in condition fresh from the factory. AD-ID: A428873 More Infos click here
Measuring machine, TESA, 3D MICRO MS 343, , model: Ms 343 make: Germany measuring range: X: 356 mm Y: 406 mm Z: 305 mm total connection: 0.86 KW of max. workpiece mass on the table: 68 kg total weight: 170 kg of dimensions: 743 x 730 x 1,340 mm AD-ID: A269341 More Infos click here
Detention course testing set , Herion, HP 850, , hydraulic detention course
testing set for the determination of the oberflaechenfestigkeit of
materials, haupsaechlich concrete AD-ID: A419413 More Infos click here
Optical tool tools SONY KIORITSU SEIKI , , , , 1 pieces optical tool tools, make SONY/KYORITSU SEIKI CO Ltd. Japan, type TS-II, year of construction 80's, with transport damage (see fig. 5). Price EUR 750,--. AD-ID: A416701 More Infos click here
Tool adjusting equipment, Firma Bodmer, , , Tool attitude equipment To examine and measure Ernest Bodmer Fils with optics u vernier type 320-OPT BM-500 machine-No 768 M100 Microfix super condition very well around the cuts at the drill!! AD-ID: A300316 More Infos click here
Universal hardness test equipment, Wolpert, DIA TESTOR 2 RC, Universal hardness tester for "Brinell - Vickers - Rockwell".
Retrofitted in a new machine condition. Top quality.
Optional - data aquisition system available.
Warranty 12 month in Europe., AD-ID: A190631 More Infos click here
Course test equipment, Mohr+Federhaff, UPD 40, , universal test equipment
completely for course of bending and compression tests. Overhauled
completely in the Topzustand. Lastbereich 0-400 kN. Modernized with
new and most modern data acquisition on PC. Fine strain gauge as
optional accessories available. Mascjhine is complete with PC and
clamping fixture. Guarantee 12 months. AD-ID: A190634 More Infos click here
Figuration ester , Mahr, MMQ 10 Version 1.3, , figuration esters of Mahr GmbH Goettingen
type MMQ 10 version 1.3 approx.. 1 month in enterprise very good
condition essay part number: 6710613 engine part number: 5440088
serial no./year of construction: 2000 AD-ID: A366869 More Infos click here
Hardness tester, WOLPERT, Dia Testor, , universal hardness test equipment
completely high-quality general overhaul with warranty optinal also
with modernization for Vickers/Brinell/Rockwell with PC connection AD-ID: A408660 More Infos click here
horizontal tools pre-setting equipment , Zoller, H 420, , HR-REF-1964
kind of machine: horizontal tools pre-setting equipment manufacturer:
Zoller type: H 420 technical data: - measuring range along 300 mm -
measuring range crosswise 300 mm - set accuracy 0.001 mm - truth of
running 0.002 mm - electronics 6080 condition: ready for use price:
2.900, - euro net location: Region North-Rhine/Westphalia availability
off: the trading firm Ravensberg is immediately a machine broker. They
buy machines directly over us from the owner. For buyers no
commissions develop. When desired we organize machine transport.
Mistakes in the offer remain reserving. AD-ID: A393132 More Infos click here
To evaluation software KMG Office, , , , Evaluation software KMG Office for the evaluation of the measuring expirations ball staff, Paralellendmasse and stage final assembly ASS after DKD requirements (DIN EN ISO 10360-2) - see pdf document AD-ID: A288522 More Infos click here
Dino Lite plus+, , , , digitally Microscope (demonstrating
device/exhibit) Dino Lite plus+ type AT the 413T, is a novelty from
Taiwan. They will be inspired, which is everything in so small
equipment. Dino Lite plus+ is the low-priced replacement for a
profilprojektor several thousand euro costs. They can measure with
this equipment all mass of your parts, expressions by E-Mail dispatch
and too on video take up. This equipment is so versatile and simple to
serve that it makes a simple joy with it to work. The equipment had a
USB connection and can be attached thus to any PC/laptop. A condition
is the operating system Windows XP or Vista. Dino Lite plus+ consists
of a highly developed camera with a dissolution of 1280 x 1024 1,3M
pixel and an enlargement of 10x 230x in addition comes the new
digitally zoom shot of up to 330x. thus can one a very large partial
spectrum measure. The new integrated Micro Touch simplifies the admission of the
pictures. Videos can be taken up with a Frame rate by up to 30 Fps.
Exactly correctly in order to dispatch these videos by E-Mail. Dino
Lite plus+ can be used as: Microscope e.g. for control of plates
-Profilprojektor e.g. for calculation of precision parts video Cam
e.g. for video took up any kind with Dino Lite plus+ can one mass,
distance, angle, radius measure and control. Specially the software
makes that possible where of others still dreams. Look at yourselves
the pictures!! gladly we can initiate a demonstration. This set
contains: - digitally hand microscope with 1.8m USB cable - CD with
DinoCapture software, driver and guidance - fashionable stand with
mobile arm installation guidance is contained of CD on that. AD-ID: A365693 More Infos click here
surface roughness measuring instrument , Mitutoyo, Surftest 211 Serie 178, , pictures and
technical data can be passed on by email. AD-ID: A401253 More Infos click here
Printed circuit board testing equipment , Schlumberger, Kombi - Tester S 790 VXI, , Austattung pin - Electronics: 8 DS1 - Modules (16 universal pin with 8:7: 1), 2 DS of 2 modules (32 universal pin -4.5 V to 5.5 V), 1 DS3 - module (32 universal pin -15 V to + 15 V); Equipment VXI - Instruments: Digitally circuit analyzer Datron 1362, Counter timer HP 1420 A, function table HP 1440 A; other equipment: AIU similar - in - Circuit - unit, DVOM circuit analyzer, ARM similar - Routing - module, signal ACCESS panel, nearly sample DIAGNOSTIC sample, operation control panel, bar code reader, ticket printer; Work station Sun IPX software Cate AD-ID: A420279 More Infos click here
Surface plate cleaning set, , , , Surface plate cleaning set (basic equipment) consisting of: 1 x buffing machine eddy - Limpia 13 1 x operating instruction 25 x Metal Clean Pads 10 x Feinoel Pads 2 x polishing lotion 1 litre 2 x basic cleaners for metals 1 litre 1 x Feinoel (corrosion protection), 0.5 litres 10 x of overshoes 1 x extension cord 10 m Optionally to it: Mobile storage cabinet out of sheet metal, in which order is clearly arranged given and everything. Surcharge: 800,00. AD-ID: A290444 More Infos click here
CNC Controlled Single Column Coordinate Measuring, D E A (Italien), BRAVO 4207, D E A (Italy)
CNC Controlled Single Column Coordinate Measuring
Model BRAVO 4207 Year 1990 ________________________________________________________
Consisting of: Working Range:
Measuring column, longitudinal movement, X Axis 4,070 mm
Measuring slide, cross, as Y Axis (measuring head) 1,185 mm
Measuring slide, vertical, as Z Axis (vertical) 1,985 mm
Adjustment of measuring head, roll axis 360 °
pitch axis 220 °
Measuring table 5,000 x 2,000 mm
Weight, approx. 15,000 kg
Space required 6,000 x 4,500 x 4,000 mm
Accessories / Special Features :
o 3D tracer head, with turning/swivelling device.
o Universal 3D Measuring Software, KOROS CAD 5.2.0 from November 2001 (with lots of enhancements), as well as HOLOS UX for manual or automatic measuring of all geometric elements and free-form surfaces, ideally on passenger car bodies, engineering parts and large forming tools.
o Separate switch cabinet (Master F1) with programming possibility and a mobile manual control console.
o Steel clamping table, which can be levelled, 2,000 x 5,000 mm.
o Machine was maintained annually by DEA Company, and the software was updated regularly.
This unit is ideal for measuring complete car bodies.
Condition : Very good. Machine is assembled and can be inspected under power. Delivery : Ex stock, as inspected.
Payment : Net, after conclusion of contract.
Thank you for your interest. We have a selection of measuring machines on stock.
, AD-ID: A240984 More Infos click here
ZEISS SMM - CNC Double Column Measuring Unit, ZEISS, SMM, Z E I S S (Germany)
CNC Controlled Double Column Measuring Unit
Model SMM Year 1981 Machine was retrofitted with new measuring columns and control in 1995 ________________________________________________________
Consisting of: Working Range:
2 measuring columns, longitudinal movement, X Axis 5,000 mm
Measuring slide, cross, as Y Axis (measuring head) 1,400 mm
Measuring slide, vertical, as Z Axis (vertical) 2,100 mm
Measuring table, approx. 6,000 x 3,000 mm
Weight, approx. 15,000 kg
Space required, approx. 7,000 x 3,000 x 3,000 mm
Accessories / Special Features :
• Measuring 3D tracer head (scanning-head) with automatic tracer changer, with one set of measuring tracers.
• Universal 3D Measuring Software, ZEISS UMESS UX (with lots of enhancements), as well as HOLOS UX for manual or automatic measuring of all geometric elements and free-form surfaces, ideally on passenger car bodies, engineering parts and forming tools using double column work process, with coupling of the columns.
• Separate switch cabinet with programming possibility and a mobile manual control console.
• Steel clamping table, which can be levelled; with punched hole raster for easy mounting of workpieces.
• Machine was maintained annually by Zeiss Company, and the software was updated regularly.
This unit is ideal for measuring complete car bodies.
Condition : Very good. Machine is still assembled, but will soon be arriving in our stock. Delivery : Ex stock, as inspected.
Payment : Net, after conclusion of contract.
Thank you for your interest. We have a selection of measuring machines on stock.
, AD-ID: A240981 More Infos click here
Piezocontroller/XYZ meter, PHOTON CONTROL, MD 3, , three-pin CONTROLLER for Piezostages and Piezoelemente without
feedback uses Piezocontroller/XYZ meter; without description or
accessories; for lack of appropriate knowledge no data to function or
condition possible AD-ID: A299926 More Infos click here
Tunable Notch filter , Wainwright Instruments GmbH, WRCD1700/2000-0.2/40-10EEK, , on the side of the manufacturer are also
the technical data available; Equipment originates from the dissolved
mobile phone manufacturing Siemens/Benq AD-ID: A352354 More Infos click here
3 D coordinate measuring machine , Zeiss, UMC 550, 1.Zeiss UMC 550
Measuring volume X= 550 mm
Y= 1200 mm
Z= 450 mm
Contruction type: Moving portal
Dimensions: Legth = ca. 2040 mm
Width = ca. 1300 mm
Height = ca. 2750 mm
Probe head: latest Leitz probe head, measuring type
Free height under portal:600 mm
Weight of the CMM : ca. 3,1 t
Air supply : Air pressure 6 to 10 bar, clean filtered and oil free
Air consumption ca. 4 l/min.
Electrical power supply:AC 220V, 50 to 60 HZ
Environment temperature:20°C +3C°
Tool changer : latest Leitz model for the Leitz probe head
2.Computer:Windows XP computer and printer according to the technical state of the art at the delivery date
3.Software:Quindos Basis 7.0 CAD-based evaluating software, which also includes among other features:
-Measuring of standart geometrical elements
-Online/Offline generation of probing points
-Free programming of procedures and loops
-A graphik package for individual plots
-Position and form tolerances acc. to ISO R1101
This is a retrofitted machine, completely renewed, brand-new in our work been mounted and tested..
The final accuracy test demonstrated an unusual high accuracy for this kind of machine kinematics.
Infrared thermometer, IRCON, Modline 3, , contactless temperature measuring
system; Measuring head for application of glasses (temperature range
50 - 2500 C); fokussierbbares objective with looking through visor;
with extensive manual for the installation and operation (dt. and
engl.); Data after best knowledge AD-ID: A287194 More Infos click here
Laser interferometer, CSO Mesure Grenoble, HC 500, , excerpt of the description of the
manufacturer: HC500 laser micro interferometer of uses micro optics
technology. The sensor head, A small more cylinder, CAN easily
integrated in most applications. Associated ton of A COUNTING control
unit, this turn key system is dedicated tons contactless DISPLACEMENT
and deformation measurement with A high accuracy over A 1 meter rank.
Examples OF applications: Calibration OF DISPLACEMENT of sensor
Positioning OF submicronic steam turbine and gas turbine system
DISPLACEMENT measurement under mechanical strain dilatation
measurement (expansion) Measurement through A window. without
description or accessories (also no sensor) AD-ID: A300010 More Infos click here
Multi Channel laser diode CONTROLLER, ETEK, MLDC-1016C, , without description or
accessories; 220 V, interface IEEE-488 and RS-232; technical data not
available; for lack of appropriate knowledge it is unfortunately not
possible for me to test the function (agreement over return with lack
possible) AD-ID: A299877 More Infos click here
3D Scanner, Steinbichler Optotechnik GmbH, COMET 200/400 - 2M, , sales highly exact optical 3D measuring
system 3D scanner of the type Comet 200/400 2M with the measuring
fields 200 mm, 400 mm as complete system inclusively. 2 days training,
complete software, calibration boards, control computers as well as
software to the quality assurance and targetist comparison. AD-ID: A402416 More Infos click here
Universal test equipment , INSTRON, 6204, , for course and compression test
measuring range 7.5 15 tons of test speed of 0.5,500 mm/min width
between the stands 560 mm gr. distance between the holding fixture
holding 900 mm of external dimensions: Width 1100 mm of depth 600 mm
height of 2300 mm weight approx.. 700 kg accessories: Transducer
INSTRON 2518-112, tax console INSTRON 2330-035, PC and printer,
machine has interface, it is also without PC to be operated, last
calibration 04/06 AD-ID: A403448 More Infos click here
Hardness testing set, FRANK, WELLTEST 38500, , Make: FRANC model: Year of construction waved 38500: approx. 1980 direct reads off possibility for Rockwell B + C technical data: Test height 0,270 mm of discharge 160 mm of dimensions 200 x 500 x 670 mm weight 88 kg accessories: Underframe P r e i s: 2.100,00 AD-ID: A237259 More Infos click here
Combi hydraulic graph , Dr. Fahrentholz, CHTD, , Plumb bob frequency 210 kHz; Dissolution of depth + - 1 cm; 1 digit= 1 cm, data in, exit V.24 R-S 232c; Measuring range 1:50 stage 1-4, 0-24m, 1:100 stage 1-4, 0-48 m; with laser range finder Farafi 8000 (laser class 1); 2 echo plumb bob transducers 210 kHz (indication of frequency uncertainly, after other documents possibly 100 kHz); Accessories in 2 Zarges boxes; Equipment was not examined up to the deactivation before 2 years functionally, current condition AD-ID: A411479 More Infos click here
PC and Printer (up to date technical level at delivery time)
incl. installation not incl. transport.
The machine is brand-new in our work been mounted and tested,
completely new rebuilt with new CNC WB05 electronics (Leitz Protocol as machine language), cables, air pipes, Leitz 2-joystick jogbox, aso. (The machine was originally built in the middle of the '90s).
PSFU 600 bell mountain gear wheel measuring machine , Klingelnberg , PSFU 600 , , Computer evaluation, the machine is outdated and modernizes wheel diameter mm 600 Grundkreisdurchmesser mm of 570 spur toothing mm of 160 module of 0.1-20 Schraegungswinkel 0-90 snails degrees of 160xsing point admission mm of 125-665, the machine has an accuracy certificate, and is newly it was only rarely used AD-ID: A330318 More Infos click here
Pendulum ram impact testing machine , TREBEL, PSW 3015, , max. work 30 kpm
load 15/30 mkg recamp distance 40,120 mm of recamps for samples 10 x
10 mm of external dimensions: Width 550 mm of depth 1100 mm height of
1400 mm weight approx.. 400 kg (machine from school, very good
condition) AD-ID: A403451 More Infos click here
Gas measuring instrument/measuring suit-case , Draeger, Multiwarn B P Ex, , portable gas
measuring instrument for the personal continuous monitoring of
mixtures combustible gases or steams in the ambient air on the job;
with inserted pump for the measurement of gas concentrations over a
hose probe; Scope of supply as represented in the photos: with
operating instructions, battery charger, calibration chamber, 2
function plugs, 10 m hose, div. Accessories; last calibration 2005;
after short test the equipment seems to be functional, to be renewed
however thus possibly the tender unit is with decreased Akkukapazitaet
to be counted and AD-ID: A418469 More Infos click here
Coordinate measuring machine , Mora, Marker, , the measuring
machine (model marker) is a small measuring instrument with
3D-Koordinatenmesssystem accuracy class according to VDI/VDE 2116 MPEe
= 50+L/10< = 130 elevator measuring range Z-axis 800 mm width
measuring range y axis 500 mm length measuring range x axis 1000 mm
the measuring instrument replaces the traditional 1-Achsen-Mess and
scribe and drill devices and is intended for the manual enterprise.
Makes possible your processing steps easily, fast, exactly and error
free durzufuehren. Work always in the three-oh enterprise, thus can be
void further Vorichtungen. According to standard the employment is
possible equipped by electronic 3D - tracers with digital display MR
10 (flat screen) with RS232 interface, so that the measuring software
INCA 3D standard edition can be used to an external PC and thus
playing easily a metrology record is provided. Accessories: Granite surface plate 1500 mm x 1000 mm x 190 mm of
surface accuracy 20 my einschlieslich 2 steel borders 1500x20x6 mm
into the stone bonded and with the plate on precision polished
inclusive. 5 threaded inserts M8 weight inclusive. Underframe 855 kg of work height 900 mm of 3 axles digital counter QC
of 200 five-side cubes from aluminum to the pressure foot in all
directions clamping jaw Mora universal probe pressure foot TP20
pressure foot system with 1 admission and 1 tracer employment module
asterisking aster M2, 30mm, ball 2.0 mm of reference ball D 30 mm of
software licence INCA 3D standard edition stretch manually this
contained: Tool library Taterverwaltung PH6/MID tracer calibration
module adjustments 3 points point of level straight line 3 levels
level - 2 points translation rotation geometrical adjustment of
elements point - straight line - level circle, slotted hole,
rectangle, ellipse, cylinder, cone, ball, Poligin, torus, distance
angle being/actual comparison of measuring expirations editor for
verfahrwege adjustable program configuration - copying/cutting
out/inserting actions with geometrical shift dragee and drop function
material strengthens, Relative ones proceed and touching ways mirrors of measuring
expirations automatic expenditure for minutes automatic element
recognition export of measuring expirations in the HTML format
expenditure for text minutes editor for text report format and for
Lable format text report and preview ASCll expenditure of text minutes
in the ASCLll format AD-ID: A353984 More Infos click here
Vibration & Harm meter , CASTLE, GA2001, , with 2 pieces triaxially Pre Amp interface
KD1301, 1 single Axis Attachement KD1302, lead for PC (), bag; without
description (can be downloaded on the side of the manufacturer); for
lack of relevant knowledge not tested (purchase no risk, 2 weeks
return right) AD-ID: A391205 More Infos click here
, Hofmann, HL-100, , - to balance from electric motor anchor, fans, impellers etc. - upto max. 150 kg - with accessories and documentation AD-ID: A434278 More Infos click here
To caliper gauge workshop caliper gauge , , , , workshop caliper
gauge without micro-adjustment, without pinches of measuring range
ca.1000mm see photo bill length approx. 200mm see photo ex-factory
price approx.. 600 with me only 225 AD-ID: A408780 More Infos click here
Power Meter, Anritsu, ML83A, , single-channel milli
wattmeter for the microwave range, range of level of -60 dBm to +20
dBm frequency range from 10 MHz to 110 GHz (depending upon used
sensor). LED display with 4 digits dissolution and a small additional
analog display. Announcement in W, dBm and railways (rel). Automatic
zero position. Also to the measurement of relative achievement
suitably. Internal calibration oscillator 50 MHz, power output 0 dBm
(1 mW) recorder exit, 1 kOhm; not examined and/or calibrates, without
description or accessories AD-ID: A299870 More Infos click here
Laser scanner , SCHNEIDER Bad Kreuznach, Contour Laser Scanner Typ 6500, , The plant consists of a PC with screen, current supply, the scanner and detailed operating instructions, with software. Measured of rotasitionssymmetrichen parts of max. workpiece capacity: D 110 mm, L 250 mm, thread 3Kg AD-ID: A403675 More Infos click here
Fine measuring table , , , , fine measuring table: Measuring range
approx. 100mm measuring table approx. 60x70 ex-factory price approx..
190 with me only 60 table surface polished and hardened, with
schumutznuten. adjustable crossarm AD-ID: A408765 More Infos click here
Frank 38532, Frank , Unibersalhaertepruefmaschine 38532, Specification:
•For Rockwell, Brinell and Vickers
•Loadrange 1-250 kgf
•Mechanical load system
•Screen evaluation with objective 70x
, AD-ID: A381432 More Infos click here
Tool pre-setting equipment , Kelch, V 320, , Camp. - NR. 1117-1079 - Control Heidenhain - measuring range x 330 mm in diameter - measuring range z 420 mm of length AD-ID: A391808 More Infos click here
Universal Testing Machine tensile testing machine, GALDABINI, Quasar 50 kN, Max. testing force 50 kN, actual WINDOWS software (free programmable testing procedure) more than 600 ready prepared testing results - demo machine for special price
The machine state is as new. This machine is equivalent to a new machine.
Price of machine is without clamping heads (shown on the photo) because this equipment will be delivered as option according to your requirements.
Price includes:
- Machine 100 % functional
- incl. load cell 50 kN (quality class 0.5 from 500 - 50000 N)
- warranty 12 month
- software Graphwork 5 (actual)
- without clamping heads (as option)
- without costs for delivery
(depending on distance)
- incl. Setup, training and DKD calibration
Optional:
- clamping heads
- bending support
- compression plates
- extensometer
- climatic chamber
Even everything for to perform standard test procedures or according to you company requirements up to high performance testing equipment like MICRON LASER SPECKLE (optical Laser Speckle extensometer for non contact measuring of elongation for metal, plastic and other...
Please ask for different machines with higher / lower forces, special equipment or applications: We offer new machines with highest quality and best price ratio – prices like , AD-ID: A408650 More Infos click here
Intrascope, Volpi, 9,6/100 30 Grad, , Volpi Intrascope with test certificate type: 9.6/1000 Mirror pipe 90 degrees August eyepiece 10x AD-ID: A323043 More Infos click here
MKMG.04 Elabo achievement measuring instrument 90-5AZ DATA Hold , Elabo, 90-5AZ , , you offer company Elabo from an industrial firm dissolution on
an achievement measuring instrument used. Type: 90-5AZ with DATA
Hold, 2 measuring range: 16A upto max. 4000W, 1,6A upto max. 400W,
mass: Spreads 475mm x height of 150mm x depth 300mm. Manufacturer
data: The measuring instrument is steered an active power measuring
module with DATA Hold function over timers with operating
instructions, inspection report electrical devices VDE 0702 of
16.01.2006, work calibration light of 16.01.2006. Further details see
picture AD-ID: A349338 More Infos click here
MKZ.155 Leuze lumiflex light curtain S + E 1 - 3,5, Leuze, lumiflex, , you offer
company Leuze from an industrial firm dissolution on a used light
curtain. Type transmitter: Outline transmitter KT 36 40, type
receiver: Outline receiver KT 36 40, external dimensions: Spreads
385mm x height of 40mm x depth 30mm. AD-ID: A297349 More Infos click here
Technical school equipment for material characterisation, Haake Mess-Technik GmbH, Record 90, , technical school equipment for the material
characterisation of polymer prescriptions with Kleinstmengenextrusion.
With attachments such as double screw-type extruding machines,
kneading machines as well as film blowing nozzle with film departure
and water bath to the control koplette software is present. With few
kilograms material can-tries to be accomplished for the determination
of the material and prescription characteristics by polymer materials. AD-ID: A317273 More Infos click here
Hardness testing set , FRANK, Frankoskop 38532, , for Brinell, Vickers and Rockwell
discharge 145 mm test height 280 mm of 18 test load stages 9.8 2450 N
test table 50 mm of external dimensions with table: Width 550 mm of
depth 700 mm height of 1700 mm weight approx.. 190 kg accessories:
optical mechanism with objectives 70 and 140-fach div. Diamond cone
and ball retainer, div. Hardness control plates test table 155 mm AD-ID: A403455 More Infos click here
3D Measuring Machine, DEA , IOTA 0102 CNC, Measuring volume:
X= 625, Y= 1025, Z= 465
incl.Software Quindos6
Probehead Renishaw PH9 + TP2/TP20
Incl. PC and Printer
incl. installation not incl. transport.
Overall Dimensions: 1929mm x 1257mm x 2720mm
Weight: ca. 3 t
The machine is in a very good condition, actually not a "used machine", but completely new rebuilt with new CNC WB05 electronics (Leitz Protocol as machine language), cables, air pipes, Leitz 2-joystick jogbox, aso. (The machine was originally built in the middle of the '90s). , AD-ID: A368243 More Infos click here
Tool adjusting equipment Microset Gildemeister , Gildemeister, EG500S, , manufacturers:
Gildermeister DeVLieg GmbH type: EG500S year of construction: 1983
characteristic of the machine: EG500S-ES302-33-64 of DPA range of
adjustment: crosswise 520 mm along 720 mm of measuring instruments:
LS703; 0,002 announcement: DPA projector: 20 subject mechanism to the
Schneidenabsatung EG500-06.080 zero-honour GM5oFC-NL-ES300 knifehead
Aufn.Zwischenflansch and talk, - case AD-ID: A348653 More Infos click here
3D theodolite measuring system , , RMS 2000, , The RMS 2000 is an optical, mobile 3D measuring system. RMS stands for remote Measuring system. The system consists of 2 to 8 theodolites, a connecting system and a PC with printer or Plotter.Die computations with the software MESCAL is implemented. Function mode: The computer learns over a calibration procedure the accurate position each individual theodolites in the area. Further it takes up the angles of traverse, etc. After the calibration each measuring point with two theodolites must be angezielt. Each theodolite conveys two angles to the computer: one in purchase to its horizontal plane and one in purchase to its vertical level. The computer and/or MESCAL computes the space coordinates of the measuring points from the developed angles. Therefore the RMS has 2000 practically no measuring volume borders. Ranges of application: - everywhere, where contactless measuring necessarily actual everywhere, where workpieces cannot be measured with a coordinate measuring machine (due to of size or management) the accuracy become as yardstick between measured length and the expected measurement inaccuracy indicated. This yardstick is 1: 100000 with an normalexperienced user. That is called 0.1 mm with a measuring length of 10 m is the measurement inaccuracy. The connecting system consists of an Multichannel interface, a multiplexer and a 1,5m cable between interfaces and multiplexers. In addition a 50m long multiplex line cable and 1.5 m a long cable is necessary, for the connection with the communication unit for each theodolite. The communication unit provides for a stable connection with large distances. Measuring accuracy: Yardstick 1: 100,000 software: MESCAL (PTB certified) tracer: optically AD-ID: A428867 More Infos click here
Caliper gauge workshop caliper gauge , , , , workshop caliper gauge
with Feineinstlellung, with pinches of measuring range: approx. to
1500mm see photos Schnabellaenge:ca. to 200 mm see photos ex-factory
price approx.. 900 with me only 325 AD-ID: A408779 More Infos click here
Notice ruler , Maag, , , notice ruler out elox. Aluminum profile
with digital announcement. To the additional cultivation to existing
buzz saws. 1/10 mm exactly. Length of the ruler 3.00 m. With stable
folding notice. Variations in type on request. Also without digital
display possible then price with 390,00. AD-ID: A429476 More Infos click here
Measuring machine Zeiss PMC 850 Y1200 , , , , Zeiss PMC 850 precision measuring center with central drive. Measuring range: X850 Y1200 Z600 control: ST92 8-bit software: After choice we can be used on the basis the options and/or the measuring software are, the price your budget to adapt. AD-ID: A412940 More Infos click here
Agilent/HP VXI check module E8401A , Agilent/HP, E8401A, , Agilent/HP VXI check
module E8401A 13 Slot equips several of these devices with aluminum
carriages on roles available AD-ID: A343699 More Infos click here
Measuring machine Zeiss MC 850 Y1800 , , , , Zeiss MC of 850 measuring range: X850 Y1800 Z600 control: ST 87 8/16 bit software: After choice we can be used on the basis the options and/or the measuring software are, the price your budget to adapt. AD-ID: A412948 More Infos click here
FAG temperature gauge , TESTO made in Germany, 173728 , , FAG temperature gauge 173728 (AGAIN) unused original packing. Technical data; Equipment: Measured value admission NiCr Ni (thermocouple plug connector type K) -60 +1000 degree Celsius, accuracy + - 1, encasing material ABS, manufacturer: TESTO larva in Germany AD-ID: A347830 More Infos click here
gear checker, Mahr, 895 C, refurbished, altered for electrical
data logging, miscellaneous attachment,year of manufacture not known, AD-ID: A404837 More Infos click here
optical coordinate measuring machine CNC, OKM Jena, Accure 250, Measuring area X / Y / Z 250 / 125 / 180 mm
Repeatability 0,7 µm
Max. permissible error of length measurement MPEE1 = (1,1+L/450) µm
MPEE2 = (1,6+L/360) µm
Operating voltage 230 V
With series transformer 110; 127; 220 ; 240 V
50 – 60 Hz
Total power consumption 2600 VA
Environment requirements
Relative humidity 40 – 60 %
Ambient temperature for operation +15 – +35 deg. Celsius
Ambient temperature needed to ensure
The specified error of length measurement 20 deg. Celsius ±2 K
Overall dimensions (w x d x h) 980 x 1000 x 1900 mm
Machine weight 420 kg
Fully automatic measurement of
- Hobs
- Bandsaw milling cutters
- Taps and thread milling cutters
- Grinding worms
- Steped and form-cutting tools
- Profile grinding wheels
- Ball track milling cutters
- Ball-end milling cutters
- Standard and spezial tools
, AD-ID: A420607 More Infos click here
Measuring machine , Dea , Omicron A 0017, , - Dea hand-guided Omicron A 0017 - accessories: 1 pc. calibration ball, 2 pc. tracers AD-ID: A412290 More Infos click here
DC measuring amplifier , HBM, KWS 3020 B, , without description or accessories; not
tested (purchase no risk, 1 month return right) AD-ID: A395033 More Infos click here
Tensile strength tester, Industriewerk Ravenstein, FPZ 10/1, Temperature range: 18 - 25 C
220 V, 50 Hz, 13 A
with accessories
Measuring electronics in need of repair
Length: 610 mm
Breadth: 1850 mm
Height: 2150 mm
Weight: 1100 Kg + 1 Palette Teile, AD-ID: A378338 More Infos click here
Pendulum striking mechanism, , , 1 x Pendulum striking mechanism
Work contents of the pendulum
0,05; 0,1; 0,4 Kqm
Pendulum length 220 mm
Mass of the pendulum 0,117; 0,234; 0,937 Kg, AD-ID: A378345 More Infos click here
Coordinate measuring machine , Sheffield, Apollo RS-50 CNC, , Measuring machine Apollo RS-50 CNC Sheffield Measuring range: X = 1200 mm Y = 970 mm Z = 670 mm Design: Mobile, closed portal External dimensions: h = 3600 mm b = 2000 mm t = 2600 mm Weight/KMG: approx. 3 t Length measuring uncertainty: U1 = (6 + 6L/1000) m L in mm Maximum table load: 2,500 kg Compressed air feed circuit: Minimum air pressure 6 bar, oil-free consumption approx. 150 Nl/min Electrical connection: 220 V/50 up to 60 cycles per second Environment temp to Adherence to the accuracy environment temp: 20 C + 1 C Temp. - gradients/hour: 0.7 K/h temp. - gradients: 0.7 K/m 2.Rechner: PC with printer after newest state of the art 3.Software Quindos with the program modules Basis Form and position tolerances Statistics Basis Diagram Ball disk monitoring 4.CNC-Steuerung WB.05 Transport, packing and insurance after expenditure the measuring machine are in condition fresh from the factory. AD-ID: A428875 More Infos click here
Adjusting Instrument, Zoller, H320 / 132 , longitudinal travel 300 mm , cross travel 300 mm ,
table length 800 mm ,
table width 800 mm ,
total power requirement 0,3 kW , weight of the machine ca. 0,6 t ,
dimensions of the machine ca. 1,5 x 1 x 1,8 m , AD-ID: A391068 More Infos click here
Royal kontrollanlage Compact V460 , POYAL, COMPACT V460, , camp NR 2053 type
Compact V460 year of construction 2002 price on request category
measuring instrument description weight: 120 kg - 140 kg maximum tool
tools: 420 mm - 620 mm maximum tool tools: 150 mm of short report
printers zebra of LP 2824S with tool cleaning table and accessories AD-ID: A385926 More Infos click here
3D-Koordinatenmessmaschine , Wenzel, LH 86µ, , 3D-Koordinatenmessgeraet manufacturer:
Wenzel type: LH 86 - Measuring range: 800/ 1000/ 600 mm -
messunsicherheit after VDI 2617: U1 = 2.5 + L 300 m - maschinenfuesse,
passive oscillation damping - lacquer finish: Light-grey ral 7035 and
sky-blue ral 5015 - palpation system: Renishaw PH10M (trick and
tiltable) - control: CNC-3Achsen (METRO-3D) - evaluation system
consisting for CNC of: Computer system: 486-8, 66 MHz clock frequency,
Tower version 340 MT non removable disk, 16 MT RAM, 3.5 floppy ones 17
Colorbildschirm, VG output card with Windows accelerator printer EPSON
LQ 570, computer cars with lateral mounting of the PC Tower erosion on
the left of often commodity and metro 3D AD-ID: A414167 More Infos click here
Positioniersystem , Uhl __technische Mikroskopie, MS5-6IP, , new Kreutztisch for measuring microscope, Haertepruefung, measuring machine or the like. Haidenhain glass yardstick measuring system LS 403. Oh stroke 400mm x 300mm. Metrology records available. Building group is new. 4 pieces available. Price per unit. AD-ID: A412392 More Infos click here
Pre-setting equipment , MESSMA-KELCH, Trabant 271, , Tool pre-setting predominantly for Mehspindeldrehautomaten. Top plate Durchm. 700 mm without Werkzeugaufnahmen machine weight 425 kg of Ammessung LXB 1580 x 860 mm AD-ID: A414464 More Infos click here
Univ. Test equipment , MOHR & FEDERHAFF, , , gr. test load 10000 kg gr. test length
600 mm measuring range: gr. piston 10000 and 5000 kg kl. pistons 1000
and 500 kg of force announcement: Dial 300 mm, m. glass, pointer of
dragging maximum load = 10000 kg 1 division line = 20 kg = of the 5000
kg 1 division line = 10 kg of 1/10 = of the 1000 kg 1 division line =
2 kg of 1/20 = of the 500 kg 1 division line = 1 kg of rate of load
application: gr. piston steplessly 0,100 mm/min kl. piston steplessly
0 1000 mm/min engine performance 0.43 KW/980 UpM of external
dimensions: Length 1300 mm broad 700 mm height of 2700 mm weight
approx.. 700 kg AD-ID: A415167 More Infos click here
Druckpruefmaschine Seidner , Form + Test Seidner, WP 300, , druckpruefmaschine from concrete
laboratory Seidner WP 300 year of construction 1970 operationally AD-ID: A418916 More Infos click here
Roundness measuring instrument, Mitutoyo, Roundtest RA-100, Rotational accuracy of turntable (0.07+6H/10000) µm
Speeds 6 rpm
Table top diameter 150 mm
Centering range ±3 mm
Levelling range ±1 degree
Max. probing diameter 280 mm
Max. work piece diameter 280 mm
Max. work piece weight 20 kg
, AD-ID: A420599 More Infos click here
Universal measuring machine , LEITZ-STRASMANN, , , for heavy parts with 2 axis digital
display Heidenahin measuring range: 1000 x 200 mm of reading fine
measuring eyepiece (goniometer eyepiece): 1 groester clamping
diameter: 250 mm largest clamping length: 1100 mm of table
tiltableness: +/- 6 last calibration: 2005 weight approx.: 1700 kg of
operating instructions AD-ID: A423483 More Infos click here
Climatic test chamber , Feutron GmbH, KPK 200, , volumes: 200 DM Innenmasse:720 x
690 x 560 Aussenmasse:1500 x 2070 x of 1060 temperature ranges C:+
5... 100/180; -40... 100/180; -75... 100/180 dampness %: 10... 98 year
of construction: 10/1998 AD-ID: A424535 More Infos click here
Dynstat - testing set , Zwick, 5106, , FuerSchlag and possibly also bending tests
in accordance with DIN 51230; for lack of description no comprehensive
function test possible; optically good condition without recognizable
damage AD-ID: A435439 More Infos click here
Accessories for Roentgen - analysis system , FPM Freiberg, URD 63, , accessories for the
Roentgendiffraktometer URD 63; Column different width, drahtfilter,
with dove tail guidance AD-ID: A435447 More Infos click here
