Measuring machine/scribe and drill machine StiefelmayerC manually , , , , Stiefelmayer C manually X2400 Y1200 Z1000 as marking out or measuring machine price: 5.900, 00 zzgl transport + installation optionally against surcharge in addition available: Measuring counter for Wegmesssysteme. AD-ID: A412938 More Infos click here
Measuring machine, MAXI CHECK, , , work area: X: 3,050 mm Y: 1,325 mm Z: 1,000
mm total weight: 2,500 kg of larva in: England AD-ID: A292142 More Infos click here
Coordinate Measuring Machine , ZEISS, WMM 850, table length 2100 mm ,
table width 1000 mm ,
daylight mm ,
measuring range X-axis 850 mm ,
measuring range Y-axis 1200 mm ,
measuring range Z-axis 600 mm ,
weight 4 t ,
Additional Information:
CNC controlled, bridge-type coordinate measuring machine with Zeiss touch trigger stylus changing probe. The machine's strengths are its sturdy design and high reliability. It is particularly suited for simple measuring tasks on the shop-floor., AD-ID: A359660 More Infos click here
3D coordinate measuring machine , DEA, IOTA DIAMOND 0101 CNC, , 1.DEA-IOTA: DIAMOND 0101 measuring range: X = 590 mm Y = 590 mm Z = 440 mm Design: Portal building method Dimensions length = approx. 1,500 mm Width = approx. 1,200 mm Height = approx. 2,800 mm weight/KMG: approx. 3 t Positioning uncertainty 1: +4.0 m Positioning uncertainty 3: +4.5 m Maximum table load: 1,000 kg Compressed air feed circuit: Minimum air pressure 5 bar, consumption approx. 150 Nl/min Electrical connection: 220V/50 to 60HZ Environment temp. : 20 C + 3 C 2.Rechner: PC with printer after newest state of the art 3.Software Quindos with the program modules Basis Form and position tolerances Statistics Basis Diagram Ball disk monitoring Inclusive installation 4.Verpackung, transport, insurance after expenditure The measuring machine is in condition fresh from the factory. AD-ID: A428873 More Infos click here
Measuring machine, TESA, 3D MICRO MS 343, , model: Ms 343 make: Germany measuring range: X: 356 mm Y: 406 mm Z: 305 mm total connection: 0.86 KW of max. workpiece mass on the table: 68 kg total weight: 170 kg of dimensions: 743 x 730 x 1,340 mm AD-ID: A269341 More Infos click here
Tool adjusting equipment, Firma Bodmer, , , Tool attitude equipment To examine and measure Ernest Bodmer Fils with optics u vernier type 320-OPT BM-500 machine-No 768 M100 Microfix super condition very well around the cuts at the drill!! AD-ID: A300316 More Infos click here
To evaluation software KMG Office, , , , Evaluation software KMG Office for the evaluation of the measuring expirations ball staff, Paralellendmasse and stage final assembly ASS after DKD requirements (DIN EN ISO 10360-2) - see pdf document AD-ID: A288522 More Infos click here
Surface plate cleaning set, , , , Surface plate cleaning set (basic equipment) consisting of: 1 x buffing machine eddy - Limpia 13 1 x operating instruction 25 x Metal Clean Pads 10 x Feinoel Pads 2 x polishing lotion 1 litre 2 x basic cleaners for metals 1 litre 1 x Feinoel (corrosion protection), 0.5 litres 10 x of overshoes 1 x extension cord 10 m Optionally to it: Mobile storage cabinet out of sheet metal, in which order is clearly arranged given and everything. Surcharge: 800,00. AD-ID: A290444 More Infos click here
CNC Controlled Single Column Coordinate Measuring, D E A (Italien), BRAVO 4207, D E A (Italy)
CNC Controlled Single Column Coordinate Measuring
Model BRAVO 4207 Year 1990 ________________________________________________________
Consisting of: Working Range:
Measuring column, longitudinal movement, X Axis 4,070 mm
Measuring slide, cross, as Y Axis (measuring head) 1,185 mm
Measuring slide, vertical, as Z Axis (vertical) 1,985 mm
Adjustment of measuring head, roll axis 360 °
pitch axis 220 °
Measuring table 5,000 x 2,000 mm
Weight, approx. 15,000 kg
Space required 6,000 x 4,500 x 4,000 mm
Accessories / Special Features :
o 3D tracer head, with turning/swivelling device.
o Universal 3D Measuring Software, KOROS CAD 5.2.0 from November 2001 (with lots of enhancements), as well as HOLOS UX for manual or automatic measuring of all geometric elements and free-form surfaces, ideally on passenger car bodies, engineering parts and large forming tools.
o Separate switch cabinet (Master F1) with programming possibility and a mobile manual control console.
o Steel clamping table, which can be levelled, 2,000 x 5,000 mm.
o Machine was maintained annually by DEA Company, and the software was updated regularly.
This unit is ideal for measuring complete car bodies.
Condition : Very good. Machine is assembled and can be inspected under power. Delivery : Ex stock, as inspected.
Payment : Net, after conclusion of contract.
Thank you for your interest. We have a selection of measuring machines on stock.
, AD-ID: A240984 More Infos click here
ZEISS SMM - CNC Double Column Measuring Unit, ZEISS, SMM, Z E I S S (Germany)
CNC Controlled Double Column Measuring Unit
Model SMM Year 1981 Machine was retrofitted with new measuring columns and control in 1995 ________________________________________________________
Consisting of: Working Range:
2 measuring columns, longitudinal movement, X Axis 5,000 mm
Measuring slide, cross, as Y Axis (measuring head) 1,400 mm
Measuring slide, vertical, as Z Axis (vertical) 2,100 mm
Measuring table, approx. 6,000 x 3,000 mm
Weight, approx. 15,000 kg
Space required, approx. 7,000 x 3,000 x 3,000 mm
Accessories / Special Features :
• Measuring 3D tracer head (scanning-head) with automatic tracer changer, with one set of measuring tracers.
• Universal 3D Measuring Software, ZEISS UMESS UX (with lots of enhancements), as well as HOLOS UX for manual or automatic measuring of all geometric elements and free-form surfaces, ideally on passenger car bodies, engineering parts and forming tools using double column work process, with coupling of the columns.
• Separate switch cabinet with programming possibility and a mobile manual control console.
• Steel clamping table, which can be levelled; with punched hole raster for easy mounting of workpieces.
• Machine was maintained annually by Zeiss Company, and the software was updated regularly.
This unit is ideal for measuring complete car bodies.
Condition : Very good. Machine is still assembled, but will soon be arriving in our stock. Delivery : Ex stock, as inspected.
Payment : Net, after conclusion of contract.
Thank you for your interest. We have a selection of measuring machines on stock.
, AD-ID: A240981 More Infos click here
3 D coordinate measuring machine , Zeiss, UMC 550, 1.Zeiss UMC 550
Measuring volume X= 550 mm
Y= 1200 mm
Z= 450 mm
Contruction type: Moving portal
Dimensions: Legth = ca. 2040 mm
Width = ca. 1300 mm
Height = ca. 2750 mm
Probe head: latest Leitz probe head, measuring type
Free height under portal:600 mm
Weight of the CMM : ca. 3,1 t
Air supply : Air pressure 6 to 10 bar, clean filtered and oil free
Air consumption ca. 4 l/min.
Electrical power supply:AC 220V, 50 to 60 HZ
Environment temperature:20°C +3C°
Tool changer : latest Leitz model for the Leitz probe head
2.Computer:Windows XP computer and printer according to the technical state of the art at the delivery date
3.Software:Quindos Basis 7.0 CAD-based evaluating software, which also includes among other features:
-Measuring of standart geometrical elements
-Online/Offline generation of probing points
-Free programming of procedures and loops
-A graphik package for individual plots
-Position and form tolerances acc. to ISO R1101
This is a retrofitted machine, completely renewed, brand-new in our work been mounted and tested..
The final accuracy test demonstrated an unusual high accuracy for this kind of machine kinematics.
PSFU 600 bell mountain gear wheel measuring machine , Klingelnberg , PSFU 600 , , Computer evaluation, the machine is outdated and modernizes wheel diameter mm 600 Grundkreisdurchmesser mm of 570 spur toothing mm of 160 module of 0.1-20 Schraegungswinkel 0-90 snails degrees of 160xsing point admission mm of 125-665, the machine has an accuracy certificate, and is newly it was only rarely used AD-ID: A330318 More Infos click here
Coordinate measuring machine , Mora, Marker, , the measuring
machine (model marker) is a small measuring instrument with
3D-Koordinatenmesssystem accuracy class according to VDI/VDE 2116 MPEe
= 50+L/10< = 130 elevator measuring range Z-axis 800 mm width
measuring range y axis 500 mm length measuring range x axis 1000 mm
the measuring instrument replaces the traditional 1-Achsen-Mess and
scribe and drill devices and is intended for the manual enterprise.
Makes possible your processing steps easily, fast, exactly and error
free durzufuehren. Work always in the three-oh enterprise, thus can be
void further Vorichtungen. According to standard the employment is
possible equipped by electronic 3D - tracers with digital display MR
10 (flat screen) with RS232 interface, so that the measuring software
INCA 3D standard edition can be used to an external PC and thus
playing easily a metrology record is provided. Accessories: Granite surface plate 1500 mm x 1000 mm x 190 mm of
surface accuracy 20 my einschlieslich 2 steel borders 1500x20x6 mm
into the stone bonded and with the plate on precision polished
inclusive. 5 threaded inserts M8 weight inclusive. Underframe 855 kg of work height 900 mm of 3 axles digital counter QC
of 200 five-side cubes from aluminum to the pressure foot in all
directions clamping jaw Mora universal probe pressure foot TP20
pressure foot system with 1 admission and 1 tracer employment module
asterisking aster M2, 30mm, ball 2.0 mm of reference ball D 30 mm of
software licence INCA 3D standard edition stretch manually this
contained: Tool library Taterverwaltung PH6/MID tracer calibration
module adjustments 3 points point of level straight line 3 levels
level - 2 points translation rotation geometrical adjustment of
elements point - straight line - level circle, slotted hole,
rectangle, ellipse, cylinder, cone, ball, Poligin, torus, distance
angle being/actual comparison of measuring expirations editor for
verfahrwege adjustable program configuration - copying/cutting
out/inserting actions with geometrical shift dragee and drop function
material strengthens, Relative ones proceed and touching ways mirrors of measuring
expirations automatic expenditure for minutes automatic element
recognition export of measuring expirations in the HTML format
expenditure for text minutes editor for text report format and for
Lable format text report and preview ASCll expenditure of text minutes
in the ASCLll format AD-ID: A353984 More Infos click here
Measuring Machine , Mitutoyo, Euro C9166, , - Accuracy 2.9my - lanes x / y / z 905 / 1605 / 605 mm - Calibrated at 08.2004 AD-ID: A450504 More Infos click here
3D Measuring Machine, DEA , IOTA 0102 CNC/DCC, Measuring volume:
X= 625, Y= 1025, Z= 465
incl.Software Quindos6
Probehead Renishaw PH9 + TP2/TP20
Incl. PC and Printer
incl. installation not incl. transport.
Overall Dimensions: 1929mm x 1257mm x 2720mm
Weight: ca. 3 t
The machine is in a very good condition, actually not a "used machine", but completely new rebuilt with new CNC WB05 electronics (Leitz Protocol as machine language), cables, air pipes, Leitz 2-joystick jogbox, aso. (The machine was originally built in the middle of the '90s). , AD-ID: A368243 More Infos click here
Measuring machine TESA Xcel 765 DCC, Brown & Sharpe, Tesa XCEL 765 CNC/DCC, Measuring Volumen X =650 mm
Y =600 mm
Z =500 mm
Contruction type: Portalbauweise
Dimensions X Achse = 1.400 mm Y Achse = 1520 Z Achse = 2670 mm
Weight of CMM: 2543 kg
Transportweight: 3091 kg
Precision
Length measuring inaccuracy: U1 (1D) 3,9 + 2,7 L/1000
nach VDI/VDE 2617(2.1) U2 (2D) 4,3 + 3,9 L/1000
Richtlinien in Mikron U3 (3D) 4,8 + 4,2 L/1000
(inkl. Messtaster)
(L = gemessene Länge in mm)
Dissolving: 0,0005 mm
Controller: WB 05
Environment temperature : 20°C
Daily temperature fluctuation:+1°C
Temperature fluctuation overlaid:: + 1°C Minimum 4 cycles per hour Maximum temperature change im Systembereich: 1° C
Air supply: Air pressur: 5,2 bar Air consumption ca. 50 NL/min
Computer:Windows XP computer and printer according to the technical state of the art at the delivery date
Software: Quindos Basis 7.0 CAD-based evaluating software, which also includes among other features:
-Measuring of standart geometrical elements
-Online/Offline generation of probing points
-Free programming of procedures and loops
-A graphik package for individual plots
-Position and form tolerances acc. to ISO R1101
-Printer/Plotter Server
-Filter
incl. installation not incl.
transport insurance and packing
The machine is brand-new in our work been mounted and tested,, AD-ID: A427208 More Infos click here
Measuring machine Zeiss PMC 850 Y1200 , , , , Zeiss PMC 850 precision measuring center with central drive. Measuring range: X850 Y1200 Z600 control: ST92 8-bit software: After choice we can be used on the basis the options and/or the measuring software are, the price your budget to adapt. AD-ID: A412940 More Infos click here
Measuring machine Zeiss MC 850 Y1800 , , , , Zeiss MC of 850 measuring range: X850 Y1800 Z600 control: ST 87 8/16 bit software: After choice we koennen on the basis the options and/or the measuring software to be used are, the price your budget to adapt. AD-ID: A412948 More Infos click here
optical coordinate measuring machine CNC, OKM Jena, Accure 250, Measuring area X / Y / Z 250 / 125 / 180 mm
Repeatability 0,7 µm
Max. permissible error of length measurement MPEE1 = (1,1+L/450) µm
MPEE2 = (1,6+L/360) µm
Operating voltage 230 V
With series transformer 110; 127; 220 ; 240 V
50 – 60 Hz
Total power consumption 2600 VA
Environment requirements
Relative humidity 40 – 60 %
Ambient temperature for operation +15 – +35 deg. Celsius
Ambient temperature needed to ensure
The specified error of length measurement 20 deg. Celsius ±2 K
Overall dimensions (w x d x h) 980 x 1000 x 1900 mm
Machine weight 420 kg
Fully automatic measurement of
- Hobs
- Bandsaw milling cutters
- Taps and thread milling cutters
- Grinding worms
- Steped and form-cutting tools
- Profile grinding wheels
- Ball track milling cutters
- Ball-end milling cutters
- Standard and spezial tools
, AD-ID: A420607 More Infos click here
Measuring machine , Dea , Omicron A 0017, , - Dea hand-guided Omicron A 0017 - accessories: 1 pc. calibration ball, 2 pc. tracers AD-ID: A412290 More Infos click here
Coordinate measuring machine , Sheffield, Apollo RS-50 CNC, , Measuring machine Apollo RS-50 CNC Sheffield Measuring range: X = 1200 mm Y = 970 mm Z = 670 mm Design: Mobile, closed portal External dimensions: h = 3600 mm b = 2000 mm t = 2600 mm Weight/KMG: approx. 3 t Length measuring uncertainty: U1 = (6 + 6L/1000) m L in mm Maximum table load: 2,500 kg Compressed air feed circuit: Minimum air pressure 6 bar, oil-free consumption approx. 150 Nl/min Electrical connection: 220 V/50 up to 60 cycles per second Environment temp to Adherence to the accuracy environment temp: 20 C + 1 C Temp. - gradients/hour: 0.7 K/h temp. - gradients: 0.7 K/m 2.Rechner: PC with printer after newest state of the art 3.Software Quindos with the program modules Basis Form and position tolerances Statistics Basis Diagram Ball disk monitoring 4.CNC-Steuerung WB.05 Transport, packing and insurance after expenditure the measuring machine are in condition fresh from the factory. AD-ID: A428875 More Infos click here
3D-Koordinatenmessmaschine , Wenzel, LH 86µ, , 3D-Koordinatenmessgeraet manufacturer:
Wenzel type: LH 86 - Measuring range: 800/ 1000/ 600 mm -
messunsicherheit after VDI 2617: U1 = 2.5 + L 300 m - maschinenfuesse,
passive oscillation damping - lacquer finish: Light-grey ral 7035 and
sky-blue ral 5015 - palpation system: Renishaw PH10M (trick and
tiltable) - control: CNC-3Achsen (METRO-3D) - evaluation system
consisting for CNC of: Computer system: 486-8, 66 MHz clock frequency,
Tower version 340 MT non removable disk, 16 MT RAM, 3.5 floppy ones 17
Colorbildschirm, VG output card with Windows accelerator printer EPSON
LQ 570, computer cars with lateral mounting of the PC Tower erosion on
the left of often commodity and metro 3D AD-ID: A414167 More Infos click here
Measuring Machine , TESA , 3D MS 8101, , Work: X: 650 mm Y: 580 mm Z: 430 mm Total weight: 300 kg Year of production: Made in 1985: Germany AD-ID: A448670 More Infos click here
