Test field, Schuermann Elektronik Ecoair, , , for three-phase alternating current outlets 5Anschluesse for 7 KVA and 5 connections for 11 KVA, all outlets over/circuit breakers separately adjustably. In the test field 6 Ampermeter, to 1 tensiometer, are inserted digital displays for current measurement, power factor measurement and power measurement AD-ID: A121858 More Infos click here
Three-phase current supply simulator , Spitzenberger&Spieß, Typ 3000/C, , three-phase power supply from the research institute, Bj not known 3000 VA, for example, contains voltage modulator, distortion simulator, phase panel, oscillator; mass approximately 180 x 90 cm, weighing about 300 kilograms, information on function and state is not possible (to one of the three power amplifiers are the transport blades aborted 2); documents not available AD-ID: A365916 More Infos click here
Hardness Tester, Wolpert, Dia Testor 2 Rc, , Basic Facilities: load facility with Prüfkräften 1 250 Kg of push-button adjustable in accordance Vickers ISO 6507 (5 10 15 20 30 40 50 60 100 - 120 kg) for testing Brinell ISO 6508 (15625 31.25 62, 5 187.5 250 kg) for examination by Rockwell ISO 6506 (preload 10 kg, 60 100 150 Kg)-optical equipment with vertical Illuminator-screen 140 mm Fresnelllinse to lighten the Matts [...Technical data truncated] AD-ID: A463562 More Infos click here
Printed circuit board testing equipment , Schlumberger, Kombi - Tester S 790 VXI, , Austattung pin - Electronics: 8 DS1 - Modules (16 universal pin with 8:7: 1), 2 DS of 2 modules (32 universal pin -4.5 V to 5.5 V), 1 DS3 - module (32 universal pin -15 V to + 15 V); Equipment VXI - Instruments: Digitally circuit analyzer Datron 1362, Counter timer HP 1420 A, function table HP 1440 A; other equipment: AIU similar - in - Circuit - unit, DVOM circuit analyzer, ARM similar - Routing - module, signal ACCESS panel, nearly sample DIAGNOSTIC sample, operation control panel, bar code reader, ticket printer; Work station Sun IPX software Cate AD-ID: A420279 More Infos click here
Piezocontroller/XYZ meter, PHOTON CONTROL, MD 3, , three-pin CONTROLLERs for Piezostages and Piezoelemente without feedback; without description or accessories; for lack of appropriate knowledge no data to function or condition moeglich AD-ID: A299926 More Infos click here
Tunable Notch filter , Wainwright Instruments GmbH, WRCD1700/2000-0.2/40-10EEK, , on the side of the manufacturer, the technical data available; device comes from the dissolved mobile phone manufacturing Siemens / Benq AD-ID: A352354 More Infos click here
Infrared thermometer, IRCON, Modline 3, , contactless temperature measuring system; Measuring head for application of glasses (temperature range 50 - 2500 C); fokussierbbares objective with looking through visor; with extensive manual for the installation and operation (dt. and English); Data after best knowledge AD-ID: A287194 More Infos click here
Laser interferometer, CSO Mesure Grenoble, HC 500, , Excerpt of the description of the manufacturer: HC500 laser micro interferometer of uses micro optics technology. The sensor head, A small more cylinder, CAN easily fuel element integrated in most applications. Associated ton of A COUNTING control unit, this turn key system is dedicated tons contactless DISPLACEMENT and deformation measurement with A high accuracy over A 1 meter rank. Examples OF applications: Calibration OF DISPLACEMENT of sensor Positioning OF submicronic steam turbine and gas turbine system DISPLACEMENT measurement under mechanical strain Dilatation measurement (expansion) Measurement through A window. without description or accessories (also no sensor) AD-ID: A300010 More Infos click here
Multi Channel laser diode CONTROLLER, ETEK, MLDC-1016C, , without description or accessories; 220 V, interface IEEE-488 and RS-232; technical data not available; for lack of appropriate knowledge it is unfortunately not moeglich me to test the function (agreement over return with Maengeln moeglich) AD-ID: A299877 More Infos click here
Combi hydraulic graph , Dr. Fahrentholz, CHTD, , Plumb bob frequency 210 kHz; Dissolution of depth + - 1 cm; 1 digit= 1 cm, data in, exit V.24 R-S 232c; Measuring range 1:50 stage 1-4, 0-24m, 1:100 stage 1-4, 0-48 m; with laser range finder Farafi 8000 (laser class 1); 2 echo plumb bob transducers 210 kHz (indication of frequency uncertainly, after other documents possibly 100 kHz); Accessories in 2 Zarges boxes; Equipment was not examined up to the deactivation before 2 years functionally, current condition AD-ID: A411479 More Infos click here
Gas measuring instrument/measuring suit-case , Draeger, Multiwarn B P Ex, , portable gas for the continuous personal supervision of a mixture of flammable gases or vapors in ambient air at the workplace, with a built-in pump for the measurement of gas through a hose probe; delivery level as shown in the photos: with a manual, charger, Kalibrierkammer, 2 Feature connector, 10 m hose, various accessories, last calibration 2005; recently to test the device seems to function [...Technical data truncated] AD-ID: A418469 More Infos click here
Power Meter, Anritsu, ML83A, , Single-channel milli wattmeter for the microwave range, range of level of -60 dBm to +20 dBm frequency range from 10 MHz to 110 GHz (depending upon used sensor). LED display with 4 digits dissolution and a small additional analog display. Announcement in W, dBm and railways (rel). Automatic zero position. Also to the measurement of relative achievement suitably. Internal calibration oscillator 50 MHz, power output 0 dBm (1 mW) recorder exit, 1 kOhm; not examined and/or calibrates, without description or accessories AD-ID: A299870 More Infos click here
Tool adjusting equipment Microset Gildemeister , Gildemeister, EG500S, , manufacturers:
Gildermeister DeVLieg GmbH type: EG500S year of construction: 1983
characteristic of the machine: EG500S-ES302-33-64 of DPA range of
adjustment: crosswise 520 mm along 720 mm of measuring instruments:
LS703; 0,002 announcement: DPA projector: 20 subject mechanism to the
Schneidenabsatung EG500-06.080 zero-honour GM5oFC-NL-ES300 knifehead
Aufn.Zwischenflansch and talk, - case AD-ID: A348653 More Infos click here
Pendulum striking mechanism, , , 1 x Pendulum striking mechanism
Work contents of the pendulum
0,05; 0,1; 0,4 Kqm
Pendulum length 220 mm
Mass of the pendulum 0,117; 0,234; 0,937 Kg, AD-ID: A378345 More Infos click here
Adjusting Instrument, Zoller, H320 / 132 , longitudinal travel 300 mm , cross travel 300 mm ,
table length 800 mm ,
table width 800 mm ,
total power requirement 0,3 kW , weight of the machine ca. 0,6 t ,
dimensions of the machine ca. 1,5 x 1 x 1,8 m , AD-ID: A391068 More Infos click here
Roundness measuring instrument, Mitutoyo, Roundtest RA-100, Rotational accuracy of turntable (0.07+6H/10000) µm
Speeds 6 rpm
Table top diameter 150 mm
Centering range ±3 mm
Levelling range ±1 degree
Max. probing diameter 280 mm
Max. work piece diameter 280 mm
Max. work piece weight 20 kg
, AD-ID: A420599 More Infos click here
Wet cut-off grinding machine , Anton Wimmer Maschinenfabrik GmbH, UFT 200- CE, , Messemodel Unterfluttrenner for the separation of hard materials machine into Grundaustattung with basic frame, with 2 speeds of 3000 and 6000 rpm; with coolant pump and coolant tank for 12 litre. AD-ID: A439220 More Infos click here
Accessories for Roentgen - analysis system , FPM Freiberg, URD 63, , accessories for the
Roentgendiffraktometer URD 63; Column different width, drahtfilter,
with dove tail guidance AD-ID: A435447 More Infos click here
