Single Spindle Cam-turret lathe type A Make MAS 20 A Machine 1136, built 1979 Specifications: Material diffuser 20 mm material passage through foreig...

Lathe with 6 Station Capstan and Cable Pull Barfeeder The type Myford Super7 with 6 station bed capstan is an ideal semi automatic machine for smal...

- Bar diameter: 65 mm - 2 turret with 8 tool holders VDI 30 (without tools) - 4 with tool drive - Chip conveyor - 15.5 bar high pressure pump - bar lo...

- Control: TX8H - bar diameter: 42 mm - 2 turret VDI 30 with 10 stations - 2 x C-axis - drive for rotating tools on turret 1 + 2 (without tools) - Col...

Lathe lathe lathe Abstechautomat copy lathe turning length 180 mm turning diameter over bed 300 mm spindle bore 50 mm chuck diameter 280 mm hydraulic ...

Index A 25 with 6 hole turret and bar guide...

Index B 42 with rod guide and 6 hole turret...

Chip conveyor index for C 19-29...

Cutting Diameter : 13 mm Cutting Length :160 mm Spindles: 2 Bore: 13 mm Engine Power: 3.7 kv Spindle Speed : 12000 rpm 8 axes including C-axis o...

- Bar diameter: 60 mm - Chip conveyor - loader MBL...

hydr. Turret lathe with copy attachment PITTLER Pimette type 160, 4-copying tools, 8-station turret, pneumatic tool adjustment, lots of accessories, 1...

hydr. Turret lathe with copy attachment PITTLER Pimette type 161, 4 copying tools, 8-station turret, pneumatic tool adjustment, lots of accessories, 1...

  Turret lathe Schaublin Type 122 Turning length 200 mm workpiece diameter 120 mm turret tool stations 6 Total stroke 150 mm Feed speed 10 - 200...

Technical data: - max. Workpiece dimensions - about 60 mm - hexagonal 51 mm - square 41 mm - collet - travel - longitudinal slide 90 mm - Qürschlit...

8 hole turret 4 page short stroke slide turret circuit switching time 0.66 sec speed 38-5300 clamping diameter D20 Accessories: loader Iemca AS 325/32...

Nr. 0077: 1 gebr. Einspindel-Revolver-Drehautomat Fabr. INDEX Typ ER-42/6L Bauj. 1970 mit Arb.-Ber.: bis 42mm Stangendurchlass mm Antriebsle...

Index A 25 spindle brake with 6 hole turret...

see picture - rod tube...

Weiler turret lathe chucks + + Various coolant pump + + tool holder Lever Support Manufacturer: Weiler Type: Unknown Good, used condition. Fully opera...

Headstock mother Index B 60 verygood condition...

Index C 19-C 29 cross drilling equip....

E-Magnetic Coupling new Steürwelle Index C...

Index B 60 with: thread cutting device, rod guide, Covers in good condition runs very quiet....

Index C thread-multi-sided device used completely Knaggenhülse and Oelzuleitungen be mitgelifert...

- Bar diameter: 65 mm - 2 turret VDI 30 - Chip conveyor - short bar loader LNS Quickload...

Index A 25 front bearings new...

Index C 19, spindle completely overhauled index C 29, B 42, B 60, A 25, DG 12 working spindle upon request...

BOLEY HRA curve Loser turret lathe manual + + + tool holder coolant pump type: HRA 26 Largest bar diameter: 26mm Largest Spanndurchm. at work lining: ...

Turret lathe Caballeria type TR 40 with accessories...

- Bar diameter: 65 mm - 2 Revolver - C-axis - Chip conveyor - IEMCA...

Turret Lathe Make: Pittler, Type: Pyrex 50/200.1 peak height. 225 mm turning length: 500 mm spindle bore: 64 mm Spindle speeds: 18-1800 rpm Power: 6.0...

Turret lathe Fabr HARDINGE type HCT mach 3 EC 2270 Specifications: Center height 170 mm turning length 240 mm spindle speeds from 16,125 to 3000 rpm. ...

- Fodder machine - tool turret with 12 stations - Chip conveyor - feeding Grasslin...

Description: Universal Lathe from Boley ( Germany ) apply for toolmaker , mold maker, education and Locksmith ■ Turning Diameter : 120mm ■ Spe...

Schaublin 102 HP revolver lathe 380 Volt Transport cost europe 100, -...

Schaublin 120HP 120 HP hydropneumatick 1000 Euro or closest offert...

Index B 60 new compression sleeve...

DG Index uses 12 working spindle...

Index DG changeover shaft excellent condition complete with also needed with spindle brake...

Index B transmission shafts reconditioned like new top and bottom pieces...

- EMF transmissions - 8-hole turret - rod guide - spindle brake - verygood condition-like new - 1 original color...

- Bar diameter: 70 mm - 12 - fold with turret - driven tools - Tailstock - C - axis - Chip conveyor - Tools...

  Control: CNC FUSION 640T turning diameter max. 254 mm swing over bed: 470 mm / distance between centers: 315 mm Spindle speed: 5000 r / min / ...

  Control: Siemens 840 C Bar capacity max. 60 mm spindle outside diameter 100 mm max turret with 14 stations, C-axis and driven tools Swing over...

1 used. Turret lathe Schaublin, programmgesteürt Type 122, with bar feeder and accessories. Built around the 1980th Total weight about 2.5 tons. Th...

Technical Data/Technische Daten: Spindle bore/Spindelbohrung - 63 mm Swing over bed/Umlaufdurchmesser ueber Bett - 530 mm Swing over cross slide/...

- Spindle - spindle - C-axis - Number of tools: 12 - Cross slide - tailstock 740/1280 mm - Bezel moved - hydraulic system - coolant system - work-layi...

Automatic lathe, one turning spindle, type 11T16A, STANKO Max Rod diameter 16 mm, max. Feed length with 80 mm discs, spindle speed 450- 6300 rpm s...

n.a....

Height: 210 mm turning length: 850 mm max to work. 500 mm turning diameter over bed: 490 mm spindle bore: 52 mm...