Digunakan mesin | Iklan | Informasi New | Persyaratan penggunaan | Imprint | Bookmark and Share |
spacer
Sponsored Links:
Wirths
Book Logo adverts
spacer

Mesin Plastik (2110) > Injeksi (481) > Penutup 1000 - 4999 kN (166) spacerwRSS Feed


Cari kata kunci: (Lanjutan Mencari)

 
           
spacerg
ARBURG 420M 1000 - 350
spacerg
Clamping force: 100 ton Opening Stroke: 750 mm distance between tie bars: 420 x 420 mm mould height min/max: 250 / mm size of mould plates: 545 x ...
1998
7.500 EUR
spacerw
Injection moulding machin... ARBURG 420C 1000-290
spacerw
clamping force: ton 100 opening Stroke: mm 500 distance between tie bars: mm 420 x 420 mould height min/max: mm 250 / 750 size of mould plates: mm...
2010
Germany - Nordrhein-Westfalen
spacerg
BATTENFELD HM 160-1000 S (S&P 3206CS) BATTENFELD HM 160-1000
spacerg
BATTENFELD HM 160-1000 S programming: UNILOG B6 force tons: 160 shot ccm: 594 year: 2007 price: on request contact: Mr. Ralf Schulz ...
2007
Germany - Baden-Württemberg
spacerw
ARBURG A 420 C 1300-350 (S&P 3195) ARBURG A 420 C 1300-350
spacerw
ARBURG A 420 C 1300-350 programming: SELOGICA force tons: 130 shot ccm: 139 year: 2004 price: 36.500 € contact: Mr. Ralf Schulz ...
2004
Germany - Baden-Württemberg
36.500 EUR
spacerg
injection moulding machine DEMAG ERGOtech 110-430 EXTRA NC4
spacerg
machine-no.: 502016 manufacturer: DEMAG Typ: ERGOtech 110-430 EXTRA NC4 year of construction: 2003 operating hours: 59728 h clamping unit clam...
2003
spacerw
injection moulding machine DEMAG ERGOtech 110-430 EXTRA NC4
spacerw
machine-no.: 502015 manufacturer: DEMAG Typ: ERGOtech 110-430 EXTRA NC4 year of construction: 2004 operating hours: 57802 h clamping unit clam...
2004
Germany - Nordrhein-Westfalen
spacerg
BATTENFELD TM 350/2800 Unilog B4
spacerg
...
2001
spacerw
Two-Components-Injection Moulding Machin ENGEL VC330H7200L/220Combi
spacerw
1.0 piece gebr. Two - Components - injection molding machine, with angel robot. Manufacturer: ENGEL Type: VC330H / 200L / 200Combi Year: 2006 Clamping...
2006
spacerg
injection molding machine DEMAG Ergotech 100-310 NC4 System
spacerg
Make: DEMAG Type: ERGOtech 100-310 NC4 System Year: 1998 Clamp unit Clamping force: 1000 kN Tie bar h: 400 mm Tiel bar v: 400 mm Platen size ...
1998
Germany - Niedersachsen
spacerw
Injection moulding machine Krauss Maffei KM 420 - 1900 C1
spacerw
Clamping force: 4200 kN Mould opening force, max.: 250 kN Travel force movable platen Opening: 124 kN Travel force movable platen Closing: 102 kN ...
2000
Germany - Nordrhein-Westfalen
spacerg
Injection moulding machine Krauss Maffei KM 350 - 1900 C1
spacerg
Clamping force: 3500 kN Mould opening force, max.: 220 kN Travel force movable platen Opening: 105 kN Travel force movable platen Closing: 95 kN S...
2000
Germany - Nordrhein-Westfalen
spacerw
Injection moulding machine Krauss Maffei KM 250 - 1400 C2
spacerw
Clamping force: 2500 kN Mould opening force, max.: 160 kN Travel force movable platen Opening: 86 kN Travel force movable platen Closing: 68 kN Si...
1997
Germany - Nordrhein-Westfalen
spacerg
Injection moulding machine Krauss Maffei Krauss Maffei KM 175 - 700 - 90 CZ
spacerg
Clamping force: 1750 kN Mould opening force, max.: 101 kN Travel force movable platen Opening: 50 kN Travel force movable platen Closing: 42 kN Si...
2001
Germany - Nordrhein-Westfalen
spacerw
Injection Molding Machine Battenfeld BK-T 2500-1600
spacerw
Injection Molding Machine Manufacturer: Battenfeld Type: BK-T 2500-1600 BJ: 1992 Specifications: hydraulic pressure: 400 liters / 175 bar Electrical: ...
1992
spacerg
injection moulding machine DEMAG ERGOtech 100-430 concept NC
spacerg
machine-no.: 502017 manufacturer: DEMAG Typ: ERGOtech 100-430 concept NC year of construction: 2001 clamping unit clamping force: 1000 kN dist...
2001
Germany - Nordrhein-Westfalen
spacerw
DEMAG Ergotech 1000-430
spacerw
Clamping force: 100 ton Opening Stroke: 500 mm distance between tie bars: 400 x 400 mm mould height min/max: 200 / mm size of mould plates: 540 x ...
1995
10.000 EUR
spacerg
injection molding machine Ferromatik Milacron K 110 S
spacerg
ebrauchte injection molding machine injection molding machine Ferromatik Milacron K 110 S in fully functional condition Clamping force: 110 t / 1100 k...
2000
Germany - Niedersachsen
spacerw
Injection moulding machine ARBURG 470C 1500-400 Perfekter Zustand!! Baujahr: 200...
spacerw
ARBURG 470C 1500-400 Perfect condition !!! Year built: 2006 Operating hours: 10000 h !!! Injection Unit Screw diameter: 40 mm Shot weight: 184 g / Ps ...
2006
spacerg
Injection moulding machine ARBURG 470C 1600-350 Centex Baujahr 1998, 29670 h!!!
spacerg
ARBURG ARBURG 470C 1600-350 Centex Construction year: 1998 operating hours Pump: 32079 h !!! Operating hours Machine 29670 h !! Injection Unit Screw d...
1998
spacerw
injection moulding machine Sandretto 3600-2480
spacerw
Clamping force: 360 ton Opening Stroke: 830mm distance between tie bars: 740x 740mm mould height min/max: 250 / 915 mm size of mould plates: 1160x...
2007
spacerg
Injection moulding machine  HUSKY H300RS95/85
spacerg
Clamp Force 3,000 kN Tiebar Spacing (HxV)780x780 mm Platen Size (HxV) 1130x1130 mm Daylight (Max.) 1375 mm Shutheight (Min.) ...
2008
Lithuania
spacerw
Injection Molding Machine Battenfeld TM 2700-1900
spacerw
Technical data: Operating hours: 62300 For more details see PDF document! The machine is about the end of August 2015 ready for delivery....
2001
spacerg
HEMSCHEIDT HPM 4000
spacerg
Clamping force: 500 ton distance between tie bars: 820 x 820 mm size of mould plates: 1180 x 1180 mm Screw diameter: 90 mm injection volume: 2222 ...
1997
spacerw
Injection molding machine Battenfeld BK-T 1300/400-40
spacerw
Technically 1300KN i.o. and can still be seen in operation. Holm distance 470 * 470mm opening stroke: 420mm screw diameter 50 Tool height min. 200 max...
1993
Germany - Hessen
9.800 EUR
spacerg
Injection molding machines - Special FREUDENBERG FAINJECT 2000
spacerg
screw size: 30 mm opening capacity: 100 kN closing pressure: 2000/ bei 175 bar kN control: FA-Inject 2000SIJECT OP37 closing speed: 200 mm/sec system ...
2001
Leipzig 2
spacerw
Injection molding machine up to 1000 KN ARBURG 420 C
spacerw
screw size 40 mm injection shot weight in Polystyrol g/PS closing pressure 800 kN MOULD C...
2003
Germany
spacerg
Injection molding machine injection molding machine Engel Engel e-motion 200/100...
spacerg
Engel e-motion 200/100 all-electric Original Price: 145.000 EUR of Engel Austria before dismantling tested and without defects (current test protocol ...
2006
Germany - Niedersachsen
49.000 EUR
spacerw
Injection moulding machine KRAUSS MAFFEI KM 110-380CX, Baujahr 2011  6000 h!!! T...
spacerw
Injection molding: Krauss Maffei KM KM 110-380CX Hours: circa 6000 h !! Year built: 2011. XII year of purchase: 2012 Injection Unit Screw diameter: 40...
2011
spacerg
Injection moulding machine ENGEL E-MAX 310/100, Bj2010  TOPZUSTAND
spacerg
ENGEL e-max 310/100 Year: 2010 TOPZUSTAND how the new! Injection Unit Screw diameter: 35 mm Displacement: 154ccm injection pressure: 2000 bar Clamping...
2010
spacerw
Injection moulding machine BATTENFELD HM 1000/350, 2004, Sprinter!! Mit Akku!!!
spacerw
BATTENFELD HM 1000/350 with battery !!! Year built: 2004 Injection Unit Screw diameter: 40 mm Shot weight: 200.2 g injection pressure: 1595 bar Displa...
2004
spacerg
2004, Perfekter Zustand!!!
spacerg
DEMAG Ergotech Concept ERGOTECH 300 / 630-2300 Pefekter condition !!! Year built: 2004 Injection Unit Screw diameter: 80 mm Displacement: 1583 cc inje...
2004
spacerw
Electric Injection Battenfeld  BA1000-200-CDK-SE
spacerw
1997 - 1998 Battenfeld BA1000 - 200 - CDK - SE. Electric 10 x machines. Good condition. Distance between Tie Bars: 420 x 420mm Max Shot Weight:16...
1998
United Kingdom
spacerg
Plastics injection moulding DEMAG ERGOTECH COMPACT 1500-610
spacerg
Typ:ergotech compact 1500-610 Clamping force : 150 tons Tool chuck plates : 750 mm x 750 mm Pump capacity : 22kW Heating power: 35kW Pmax: 190 ba...
1997
Europe - Czech republic
spacerw
Plastics injection moulding TOS CS 1025/320
spacerw
TOS CS 1025/320 Max.Installation height:560 mm Clamping force : 3200 KN Machine Dimensions : 6360 x 1130 x 1990 mm Machine weight: 11000 kg Docu...
1983
Europe - Czech republic
spacerg
Injection moulding machine Krauss Maffei KM 200-1000 CX
spacerg
Position: 1110 Type of machine: injection moulding machine Year of manufacture: 2008 Manufacturer: Krauss Maffei Storage location: in production ...
2008
Germany - Niedersachsen
spacerw
Injection moulding machine  Krauss Maffei KM 200-1000 C2+
spacerw
Position: 1109 Type of machine: injection moulding machine Year of manufacture: 2006 Manufacturer: Krauss Maffei Storage location: in production ...
2006
Germany - Niedersachsen
spacerg
Plastic injection machine DEMAG D 1000 - 6110 NC II
spacerg
Injection unit D 750 (6110-750) Screw cylinder B Screw diameter 110 mm L / D ratio 16-1 Injection pressure max. 1610 bar Displacement 3800 cc Mo...
1982
Germany - Baden-Württemberg
spacerw
injection molding machine Arburg 420 C 1300-250
spacerw
used injection molding machine Make: Arburg Type: 420 C 1300-250 Controller: Selogica Working hours 42000 h (new pump) Year: 1999 Clamping uni...
1999
Germany - Niedersachsen
spacerg
Injection molding machine Krauss Maffei KM 420 - 2700 - 1000 CZ
spacerg
Clamping force: 4200 kN Mould opening force, max.: 250 kN Travel force movable platen Opening: 124 kN Travel force movable platen Closing: 102 kN ...
1999
Germany - Nordrhein-Westfalen
spacerw
Injection Moulding Machine NETSTAL 8-1000-460
spacerw
1.0 pieces used injection molding machine manufacturer Netstal Type: 8-1000-460 Year: 1999 Clamping force: 100 ton Distance between tie bars: 460 x 46...
1999
spacerg
Two-component injection molding ENGEL 330H80V100HL-2F
spacerg
1.0 pieces used two - component - Injection molding: Manufacturer: ENGEL Type: 330H 80V 110 HL-2F Year: 1995 Clamping force: 100 tons of snail Horizon...
1995
spacerw
Injection moulding machine Krauss Maffei KM 300 - 2000 CX
spacerw
Clamping force: 3000 kN Mould opening force, max.: 169,3 kN Travel force movable platen Opening: 86,3 kN Travel force movable platen Closing: 67,8 ...
2012
Germany - Nordrhein-Westfalen
spacerg
Plastic Injection moulding machine  ITALTECH MSH 1200/3100
spacerg
CLAMPING FORCE 1200 TON CONTROL PANEL RENEWED WITH MIKRO STAR CONTROLLER CAN BE INSPECTED UNDER POWER...
1989
Turkey
spacerw
injection molding machine Arburg 420C 1000- 290 U
spacerw
Arburg 420 C 1000-290 U Year 2006 with upload from 100 tons to 250 tons higher clamping force working hours: only 5200 h like new Controller: S...
2006
Germany - Niedersachsen
spacerg
BATTENFELD BA 1000-315 CDC
spacerg
Clamping force: 100 ton Opening Stroke: 650 mm distance between tie bars: 420 x 420 mm mould height min/max: 250 / mm size of mould plates: 640 x ...
1999




Disaring Kemarin: 5


Hasil: 0-50 dari 166 | Berikutnya


You're viewing a translated version of this page but might
or .



Kategori: Mesin Plastik > Injeksi > Penutup 1000 - 4999 kN