Digunakan mesin | Iklan | Informasi New | Persyaratan penggunaan | Imprint | Bookmark and Share |
spacer
spacer

Kerja kayu mesin (18548) > Kayu mesin (159) spacerwRSS Feed


Cari kata kunci: (Lanjutan Mencari)

 
           
spacerg
Joinery saw with sliding table SCHNEIDER TOP ZUSTAND Typ 1603 Lieferung nach D u...
spacerg
Carpentry table miter saw SCHNEIDER Gjerde Ernex type 1603 very good condition built in 1999 is likely replacement parts are no problem, the machine i...
1999
Germany - Thüringen
2.860 EUR
spacerw
Sliding table saw Casolin Astra 500
spacerw
7.5 kw = 10 hp cutting height approx 20 cm electrically height adjustable electrically tilted to 45 1 saw blade speed - 3200 rpm sliding table 3200 mm...
Germany - Rheinland-Pfalz
4.990 EUR
spacerg
Handkreissäge MAFELL FS 130 K
spacerg
MAFELL TYPE FS 130 K max. Cutting depth 130 mm 380 V...
Germany - Bayern
790 EUR
spacerw
Carpentry Tenon Cutters MAKITA TOP ZUSTAND Typ 5500S Lieferung nach D u Oesterre...
spacerw
Carpentry Tenoner MAKITA 5500S very good condition, without any defects, the construction is very sturdy and rigid clamping range: up to 210mm width, ...
Germany - Thüringen
3.850 EUR
spacerg
Tenon Cutter with stand SCHNEIDER sehr guter Zustand Typ SK A3 Lieferung nach D ...
spacerg
Carpentry Tenoner SCHNEIDER SK A-3 very good condition, the construction is very sturdy and rigid built in 1996 is likely clamping width is max. 240mm...
1996
Germany - Thüringen
4.050 EUR
spacerw
Sliding table saw Robland NZ 3200
spacerw
5.5 KW -. 7.5 hp Cutting height up to 15 cm 3200 mm sliding table length cut width to rip fence 1525 mm electrically adjustable in height and inclinat...
2013
Germany - Rheinland-Pfalz
spacerg
Jointer Thicknesser  Robland SD 510E
spacerg
7.5 hp Working width 510 mm Working height 250 mm 4-knife - out Tersawelle electrical adjustment of the large table 2 casters in the large table, larg...
2013
Germany - Rheinland-Pfalz
spacerw
Kruesi carpentry-tenoner type ZA 66 Kruesi ZA 66 (30149)
spacerw
with bevel cutter used, good condition manufactured by Kruesi type ZA 66 Masch.-No. 329 motor 3 / 3 / 1,5 / 1,5 kW number of saw blades 5 diameter 1 ...
Germany - Bayern
spacerg
Carpentry Handbandsäge PROTOOL / HEMA / HOLZ HER SBP 285 / ZS 20
spacerg
PROTOOL Carpentry Handbandsäge SBP 285 400V * EXCELLENT CONDITION * Precise bandsaw blade guide with HM plates for the use of narrow and broad band...
2008
Germany - Baden-Württemberg
1.798 EUR
spacerw
Crosscut, miter u. Schiftersäge Graule 170 N
spacerw
Cutting height 170 mm tiltable about worm gear and crank handle, left 45, right 30 Cutting depth at 45 inclined 115 mm cutting width at 90 420 mm, lef...
2002
Germany - Rheinland-Pfalz
4.300 EUR
spacerg
Carpentry table miter saw SCHNEIDER GJERDE ERNEX Typ 1603 Lieferung nach D und O...
spacerg
Carpentry table miter saw SCHNEIDER Gjerde Ernex type 1603 very good condition built in 1990, spare parts are no problem, the machine is built today s...
1990
Germany - Thüringen
1.840 EUR
spacerw
Portable circular saw AEG HK 45
spacerw
Cutting height/depth max mm: 45 Rotation speed max rpm: 4.400 Voltage 220/230V: Yes Total connection kW: 0,71 Weight kg: 3 Condition: good ...
spacerg
Carpentry machines  119
spacerg
Fab .: Mafell type: CSE 330 L Year: 1995 Machine no .: 269608 cutting depth vertical: 330 mm Cutting depth at 15: 320 mm Cutting depth at 30: 285 mm C...
1995
Dresden/Sachsen
spacerw
Carpentry machines Mafell Durchmesser 265 x 50 x 30 mm
spacerw
for Kervenfräse, Kervenfräskopf, Kervenfräs and Abplattkopf outdoor 265 mm inner height 30 mm-50 mm inserts max speed 3000 r / min Net weight...
26215 Wiefelstede, Germany
250 EUR
spacerg
Orbital sander FESTO RS 1
spacerg
Voltage 220/230V: Yes Total connection kW: 0,50 Weight kg: 4 Condition: good ...
spacerw
Carpentry machines MAFELL EB
spacerw
Recording v. drill m. Morse taper with Reducing III MK III / II Operating voltage 220/380 volt motor power 1.5 kW Reversing switch left-right run two ...
Austria - Oberoesterreich
950 EUR
spacerg
Carpentry machines HOLZ  HER  HABA
spacerg
Roll diameter 230 mm height 290 mm side passage passage 170 mm hinge side swiveling 0-30 blade length 1905 mm. Right angle cut long timbers to 170 mm ...
Austria - Oberoesterreich
950 EUR
spacerw
Anwaermbrenner Kayser Ø 80 mm
spacerw
Bitumen heating torch burner Abflammgerät-complete with hose and regulator...
26215 Wiefelstede, Germany
45 EUR
spacerg
Carpentry machines MAFELL ZB 100 ES mit BG 400
spacerg
Depth 540 mm nominal idle speed 340-1450 rev / min Rechts-/Linkslauf Rated input 1200 W Weight 9 kg. Einsetzgebiet: ring dowel holes ring wedge anchor...
Austria - Oberoesterreich
spacerw
Overhead router SCHEER HM 14
spacerw
Rotation speed max rpm: 20.000 Voltage 220/230V: Yes CE-mark: Yes Weight kg: 5 Condition: good ...
spacerg
Double-sided cross-groove milling machine AUER BL TWIN /4F/20091126
spacerg
Moulding aggregates: 8 Beam length max mm: 6.000 Workpiece thickness max mm: 70 Workpiece width max mm: 160 NC-controlled width-adjustment: Yes Cross-...
2009
spacerw
Carpentry machines MAFELL EB
spacerw
Recording v. drill m. Morse taper with Reducing III MK III / II Operating voltage 220/380 volt motor power 1.5 kW Reversing switch left-right run two ...
Austria - Oberoesterreich
800 EUR
spacerg
Machinery for log house production AUER BL 100
spacerg
Crosscut saws: 1 Boring aggregates: 1 Moulding aggregates: 4 Beam length max mm: 4.000 Workpiece thickness max mm: 140 Workpiece width max mm: 200 Gro...
2006
spacerw
Delta sander BOSCH PDA 10-92
spacerw
Voltage 220/230V: Yes CE-mark: Yes Total connection kW: 0,10 Weight kg: 4 Condition: good ...
spacerg
Carpentry sliding table saw Casolin Astra 550
spacerg
11 kw = 15 PS no scoring sliding table 3200 mm cutting width to rip fence 1300 mm electrically adjustable in height and inclination adjustable saw bla...
2014
Germany - Rheinland-Pfalz
spacerw
CNC milling machine tap, System Connector Neuhauser ZF 23 Connector
spacerw
Neuhauser double tapping cutter ZF 23 / DL3/RO3 Connector System Bauj 1999 With the Connector is milled a double pin at the front end of a round timbe...
1999
Germany - Sachsen
12.990 EUR
spacerg
Crosscut, miter u. Schiftersäge Graule 170 N
spacerg
3 kw motor tilted by links45, right to 20 left and 60 right swivel swivel up to 45 cutting height 170 mm 6 m Ablängrollenbahn with scale and stop s...
2013
Germany - Rheinland-Pfalz
spacerw
Spindle moulder Socomec F330
spacerw
10 hp left clockwise 3 roll feed 5 tiltable to the rear 45 forward tilt 30's spindle (it could be a 40-strength spindle used) 5 speeds to 10,000 tours...
2013
Germany - Rheinland-Pfalz
spacerg
Compressed air nailers for nails up to 80mm HOLZ HER Versand nach D und Oesterre...
spacerg
Pneumatic Nailer HOLZ HER 3548 Top condition Year 2012 for Round head nails from 2.5 to 3.1 mm thick and 45 - 80mm long with 20 strip magazine silence...
2012
Germany - Thüringen
430 EUR
spacerw
Carpentry Tenon MAKITA TOP ZUSTAND 5500S Lieferung nach D und Oesterreich
spacerw
Carpentry Tenon MAKITA 5500S very good condition, without defects, the construction is very sturdy and rigid clamping range: up to 210mm width, 240mm ...
Germany - Thüringen
3.550 EUR
spacerg
Treppenfräsgeräte - Set Scheer
spacerg
Treppenfräsgeräte set consisting of: - Treppenwangenfräsgerät TW 8 - Treppenhandlauffräsgerät FG 308 - stair stringers drill BF 302 ...
1994
Germany - Sachsen
3.290 EUR
spacerw
Crosscut, miter u. Schiftersäge Graule ZS 200 NF
spacerw
7.5 hp, wheeled on sturdy castors cutting height 200 mm cutting height at 45 140 mm to the left pivot swivel up to 45 cutting length 420 mm 45 pivoted...
2013
Germany - Rheinland-Pfalz
spacerg
Carpentry sliding table saw Socomec Galax 550 EL Superior
spacerg
11 kw = 15 hp cutting height 200 mm Saw blade diameter 550 mm Cutting width on parallel fence 1500 mm sliding table length 3200 mm sliding table mount...
2013
Germany - Rheinland-Pfalz
spacerw
SLOT KETTENFRAeSE HEMA MC- 40
spacerw
KETTENFRAeSE for x 160mm x 20mm SLOT 160mm, NEUWERTIGER CONDITION EUR 650 .-- + VAT....
1996
Germany - Baden-Württemberg
650 EUR
spacerg
Mafell Zapfenfraese ZAF 160 Mafell ZAF 160
spacerg
For sale is a very well preserved Vertical router / Abblattfräse of Mafell. The machine has very little work hours and is in very good condition (l...
1996
Germany - Nordrhein-Westfalen
8.000 EUR
spacerw
Tenon Cutters Schneider
spacerw
For sale is a large tenon of the brand Schneider. Mlg with laser display on trolley about 2.75. about 0.73 m high. Skew adjustable with locking feet. ...
Germany - Niedersachsen
4.500 EUR
spacerg
Kettenstemmer Schneider
spacerg
We sell a chain mortiser of Cutter with laser display on trolleys. Approx. 4.00 m long and 0.73 m high. The machine can be seen on site, please, pleas...
2.250 EUR
spacerw
Wheeled Wagenrollauflager
spacerw
We offer a mobile Wagenrollauflager. Approx. 6.00 m, height about 0.73 m with lockable feet. Wagenrollauflager can be visited on site. For this, pleas...
Germany - Niedersachsen
750 EUR
spacerg
girder Bridge Crane DEMAG EKKE
spacerg
We offer Demag single-girder overhead traveling cranes type EKKE 5,0 t for sale. in welded box-Trägerkonstrukion, crane bridge in accordance with D...
1996
Germany - Niedersachsen
7.500 EUR
spacerw
girder Bridge Crane Demag EKKE
spacerw
We offer 2 Demag single-girder overhead traveling cranes type EKKE 3,2 t for sale. in welded box-Trägerkonstrukion, crane bridge in accordance with...
1997
Germany - Niedersachsen
16.250 EUR
spacerg
Abbund crank bucks Baumann
spacerg
We sell painted crank bucks. 6 piece complete with legs and cranks. All Kurbelböckse are GS tested and up to 1,600 kg load, have removable foot par...
Germany - Niedersachsen
220 EUR
spacerw
Tenon Makita 55013
spacerw
Tenon Cutter Makita 55013 In working order. Motor power 2,2 Kw lateral adjustment 45/20 mm beam height to 280 mm clamping width up to 240 mm peg stren...
spacerg
Tenon Cutters Makita 5500S
spacerg
Tenon Cutter by Makita, Type 5500S, in working order. Volts 220 Volts Motor Power 1400 Watt Speed ​​1650/2200 Side Adjustment 45/20 mm clamping ra...
spacerw
Uni-cutting saw Schneider 1603
spacerw
Offered at: Schneider Unisäge 1603 suitable for carpentry and wood construction, but also to all other wood trades. The saw blade can be tilted by ...
Germany - Nordrhein-Westfalen
2.500 EUR
spacerg
Circular hand saw FESTO AXP 132 E
spacerg
Circular hand saw SMA-REF-5322 Type: sliding table sawing machines Manufacturer: FESTO Model: AXP 132 E Year: 2002 Motor: 2.300 W 2.200 U/min ...
2002
Germany - Nordrhein-Westfalen
spacerw
Pull-push saw (45°) Mafell ERIKA 85 L
spacerw
Pull-push saw (45°) SMA-REF-5321 Type: sliding table sawing machines Manufacturer: Mafell Model: ERIKA 85 L Year: 2000 Motor: 3.700 rpm Workin...
2000
Germany - Nordrhein-Westfalen
spacerg
Tenoning machine Schneider
spacerg
Tenon cutting machine cutter mobile max. Clamping width 220mm spigot strength to max.120mm adjustable (quick) ideal machine for fast restore of a pin,...
Germany - Baden-Württemberg
2.700 EUR
spacerw
Tenon Cutters MAKITA 5500 S
spacerw
MAKITA POWER TAKE SCHNEIDER 5500 S * EXCELLENT CONDITION * The legend under the tap cutters. 230 V input power 1420W clamping area 210 x 240 mm side a...
Germany - Baden-Württemberg
2.890 EUR
spacerg
Carpentry chain mortiser MAFELL LS 103Ec + Fuehrungsgestell FG 150
spacerg
MAFELL Carpentry chain Mortiser LS 103 Ec + guide frame FG 150 * EXCELLENT CONDITION * CUprex high-performance engine, easy to handle. Fast Fräsket...
2007
Germany - Baden-Württemberg
2.198 EUR
spacerw
Carpentry circular saw / Kervenfräse PROTOOL CSP 132 E KERVE
spacerw
PROTOOL carpentry circular saw CSP 132 E incl Kerveneinrichtung Precise edition by large-scale tabletop with Pertinax soleplate Precise miter cuts up ...
2013
Germany - Baden-Württemberg
1.999 EUR



Hasil: 0-50 dari 159 | Berikutnya


You're viewing a translated version of this page but might
or .



Kategori: Kerja kayu mesin > Kayu mesin