Rotary cycling machine, MIKRON HAESLER, Multifaktor Typ 60.015, , rotary transfer machine with 15 stations rotary table D. 980 mm control Siemens S5 colour RAL 1015 hellelfenbein fixtures 15 St. mech. Jaw tension displacement of the units 65 mm chip conveyor with magnetic separator with 1000 litres of coolant tank filter for engine coolant Oelkühler encapsulated preparation for Oelnebelabsaugung engines: - 8 piece motor 1500 min-1 1.5 kW - 1 motor 1420 min-1 1.5 kW - 1 900 min piece motor-1 [...Technical data truncated] AD-ID: A320441 More Infos click here
CNC Machining Center universal, Ferrari, A 17 R E 504, travel: x= 1050 mm, y= 520 mm, z= 420 mm, b-Axis, a-Axis, tool changer 30 Pos. ISO 40, electric spindle 20'000 U/min., drive power max.10 kW, coolant innen,, AD-ID: A214749 More Infos click here
operation center , Burkhardt+Weber, MC 1, operation center with palett exchanger 1600x1000x1600, palett size 900x900
80 tool places CNC Bosch Mirco 8 control 1985 model, at present defective, cooling system, chip disposal, cabin, AD-ID: A465332 More Infos click here
Spare parts plates for Bosch CNC control, Bosch, , , various boards as spare parts for Bosch CNC controls must, unused, for example 27386-207401 AD-ID: A241374 More Infos click here
Machining Center - Universal, DECKEL-MAHO, DMU 50 T, Swivel round table 0 - 360 ° +90 ° / -15 degrees with electr. Wink Elan Show Pick Up tool changer 16bay New exchange control HEIDENHAIN TNC in April 2008 (manufacturer's warranty still available) Coolant system Electronic handwheel HR 410 x, y, z 500 x 400 x 400 mm HEIDENHAIN control TNC 426 Tool fixture SK 40 Spindle drive 9 / 13 kW Spindle speeds 20 - 9000 rpm Table surface area 700 x 500 mm Table load 200 Kg Feed 10 - 5000 mm / min Rapid traverse 10 - 10000 mm / min, AD-ID: A458586 More Infos click here
Universal milling machine , Maho, MH 800 E2, , Philips CNC 432 control table size: 1,100 x 600 mm table load: about 800 kg speed range: 20 - 5,000 rpm, 2 gear steps tool changer: 20 positions, ISO 40, double gripper milling head: H / V head in manüll Pinolenhub vertical displacement of 80 mm X / Y / Z: 800x500x550 mm rapid traverse X / Y / Z: 6 m / min drive: AC 15 kW footprint: 3.8 x 3.9 m height of machine: 2.1 m Machine weight: about 4,900 Kg accessories: Electronic [...Technical data truncated] AD-ID: A447431 More Infos click here
DMU50evo 5-Achsen machine , , , , 18,000 u / min 32 Pos tool changer probe Heidenhain infrared ethernet air through spindle tool measurement less than 2000 hours spindle machine comes from University Mill Plus control AD-ID: A441369 More Infos click here
Mikron UMC900 , , , , X, Y, Z = 900 x 600 x 500 speed 6,000 min-1 table 1,100 x 600 mm round table 500 mm Roto Clear IKZ (on horizontal spindle) 44 Pos tool changer prices from location AD-ID: A452445 More Infos click here
Bearbeitungszenter universal, Ferrari, B 15, , Control E 524, drives: x= z= 420 mm, c= all 2,5, maximum permissible engine speed 5000 rpm indexes 420 mm, y= 850 mm., clamping surface 1500 X.500 mm, accessories: div. Owner, table tool change-over switch It becomes a new larger Zenter angeschaft, therefore the machine becomes redundant. AD-ID: A258467 More Infos click here
Rotary cycling machine , Mikron Haesler, Multifaktor Typ 50.004, , HR-REF-1836 kind of machine: Rotary cycling
machine manufacturer: Micron Haesler, Switzerland type: Multi-factor
type 50.004 year of construction: 2005 weight approx.: 2,500 kg
technical data: - rotary cycling machine with 4 stations - switching
plate mechanism - turntable - tighteners quadruple - mechanical cheek
tension - coolant tank accessories: - splinter promoters with magnetic
separator - documentation characteristics: - dismantles at present -
ready status can be manufactured for demonstrating purposes condition:
- overhauls - maintained - ready for use price: 45.000, euro net
location: Region Hessen Verfuegbarkeit off: immediately shipping
equipment locally: available dismantling, loading and transport are
task of the buyer. The trading firm Ravensberg organizes if necessary
gladly the loading/transport of the commodity. The trading firm
Ravensberg is a broker and not owner of the offered commodity. We point out expressly that the trading firm Ravensberg furnishes only
switching achievements that is not called even contracting parties of
the buyer becomes. All information is based on the data of the owner.
Mistakes remain reserving. AD-ID: A367677 More Infos click here
LID MAHO processing centre , DECKEL MAHO , DMU 80 T, , HEIDENHAIN control work TNC 430 X 880 mm work area Y 630 mm work area 630 mm Z Desk / pallet size 900 x 650 mm Max part weight 500 kg spindle speed range 20-12000 rpm spindle / cone feed intake area SK 40 X / Y / Z 20-15 000 mm rapid traverse X / Y / Z 30 mm tools in the magazine 32 pieces Machine weight 4.5 tonnes Dimensions B / H / T 2.9 x2, 5x2, 5 m head is Manüll Schwenkbar horizon [...Technical data truncated] AD-ID: A454106 More Infos click here
CNC milling machine , Maho, 800 W, , Inberiebnahme 1993 - about Travels: X: 800 mm, Y: 550 mm, Z: 500 mm, spindle nose to table 600 mm - Clamping (table weight) approximately: 1100 x 600 mm - about speed: 4000 Rpm - interface available - control: TNC 415 HDH - Tool: SK 40 - milling head swivel - screen graphics - Gesamtanschlussert: 12 KVA - Weight: about 4200 kg - about mass transport: L: 2.80 m, B: 2, 0 m, H: 2.0 m accessories: external coolant supply, hydraulisc [...Technical data truncated] AD-ID: A466635 More Infos click here
Drilling unit , Suhner, diverse, , machining center Suhner Manufacturing cell with a total of 5 driven drilling units including one with multiple head drilling clamping cylinder Beladeeineheit original Suhner editing table, etc. drilling units can be purchased separately AD-ID: A448077 More Infos click here
Universal milling and drilling machine , Maho, MH 700 S, , Philips CNC 432 control table dimensions: 500 x 630 mm speed range: 20 - 6,300 rpm, 2 gear steps tool changer: 36 positions, ISO 40, double gripper milling head: H / V automatically swivel head Pinolenhub in vertical position 80 mm X / Y / Z: 700 x 500 x 600 mm rapid traverse: X / Y / Z 10 m / min B-axis: Full NC round table drive: AC 15 kW footprint: 5.6 x 4 m machine height: 2, 5 m Machine weight: 7 [...Technical data truncated] AD-ID: A447197 More Infos click here
Machining center , Maho, MH 600 E2 CNC, , Type: MH 600 E2 CNC machines no.: 660036 control: Philips CNC 432 Built: 1989 axes: 4 Travels: X: 600 mm Y: 400 mm Z: 450 mm Speed: 20-4000 rpm Tool changer: 20-fold SK 40 drive: 8 kW Pinolenhub: 80 mm Weight: about 3400 kg Aufstellmasse: L / B / H = 4.7 x4, 8x2, 17 accessories: CNC gesteürter head complete documentation of 10 recordings 2x three-jaw chuck good condition machine Electricity may be viewed Who [...Technical data truncated] AD-ID: A464742 More Infos click here
Drilling unit , Suhner, diverse, , machining center Suhner Manufacturing cell with a total of 5 driven drilling units including one with multiple head drilling clamping cylinder Beladeeineheit original Suhner editing table, etc. drilling units can be purchased separately AD-ID: A448076 More Infos click here
DMU 50V , Deckel Maho, DMU 50V, , Carefully DMU 50 V We are not a dealer, machine directly from customer to customer! Specifications: DMU 50 V full 5-axis control machine 426 Heidenhain 24 specialist Werkzeugwechseler spindle 15,000 rpm spindle 9600 hours machine is immediately available because the new 27.06.2008, and it is in our hall tight! AD-ID: A448944 More Infos click here
DIGMA , DIGMA HSC Maschine, DIGMA 850 HSC, , Digma 850 HSC start-up 07.01.2000 control: ATEK HS PLUS IBAG high frequency spindle - HF 120, 40000 rpm HSK40 RTCP function controllable air duct for tool cooling oil mist spraying mechanism tool length measurement with laser tool failure control with laser tool diameter measurement with laser Partables multi-function control panel to the ATEK 4th and 5th axle (tiltable milling spindle and top plate) top plate diameter 900mm tool change-over switch of 30 places Verfahrbereich X850/Y600/Z500 AD-ID: A425532 More Infos click here
Universal MC, MIKRON, UMC 900, X 900 mm Y 630 mm Z 500 mm spindle 40 SK speed 5 - 6300 rpm motor 11 kW torque 800 Nm table 600 x 1100 mm NC-Rotary table 510 mm machineweight 6,2 t * CNC HEIDENHAIN TNC 426 * autom.sliding head h-v
* 44 - ATC * NC-rotary table 0.001° * measuring probe
* tool measuring * cooling through spindle 50 bar * chip conveyor
Bedplate miller-universal , HURON, SXD-L 833, , make: HURON TYPE SXD L 833 YEAR OF
CONSTRUCTION: 1995 control: CNC along Heidenhain path control TNC 415
B stock location: Germany origin: France Frachtbasis: starting from
location x-way 3000 mm y-way 1000 mm z-way 1000 mm of
Tischaufspannflaeche 3200 x 1100 mm of spindle (mill): ISO 50
Spindeldrehzahl: 20 - 4000 U/min Gesamtleistungsbedarf 48 kVA KW of
Maschinengewicht approx.. 20 t Werkzeugwechsler C040 internal cooling
agent supply 15 bar of Vollverkleidung Spaenefoerderer of right and on
the left of electronic handwheel preparation 4 - axle Maschinengewicht
approx.. 20 t AD-ID: A424836 More Infos click here
German , Deckel Maho, DMU 50 V, Baujahr 1997, , 5-Achsensteürung GRUNDIG Mill Plus, spindle 15,000 rpm, SK 40, 24-fold tool changer, coolant system, NC round table 550x380 mm, Travels xyz-500-380-380 mm machine is about freely September 2008. AD-ID: A450517 More Infos click here
machine center universal, Schaublin CNC, 33, , control Siemens Sinumerik 3, drives:
x = 520 mm, y = 500 mm, z = 500 mm, spindle number of revolutions 30 -
7,000 U/min., spindle nose ISO 40, top plate 400 x 400 mm, universal
head 90 hor. - vertically adjustably. Approx.. 8,000 operation hours AD-ID: A317164 More Infos click here
CNC high speed BAZ , DIGMA, HSC 300, , CNC control HEIDENHAIN 530 table length x
broad 450 x 400 mm x Y Z way 300 mm of spindle numbers of revolutions
to 45,000 U/min of feed motions to 60.000mm/min. Further technical
data in the document. AD-ID: A363734 More Infos click here
CNC MC universal, PEGARD, Precivit 2.R, Technical details
x-travel 4500 mm y-travel 2600 mm z-travel 1000 mm W-axis (spindle longitudinal) 3200 mm U-axis mm B-axis (table) 0,001 mm table-size 2000 x 3500 mm table load 30 t drive capacity - spindle motor 75 kW Number of revolutions 10 - 3000 rpm tool change unit 184 , AD-ID: A446645 More Infos click here
milling machine, Alzmetall, BZV 45-2, Travel axes (X x Y x Z): 700 x 400 x 800 mm table size X: 750 mm table size Y: 500 mm tool changer: 30 - time control type: Siemens Sinumerik 810 M , AD-ID: A450361 More Infos click here
HSC machine, KLINK, HSC 124, Travel axes (X x Y x Z): 1.200 x 350 x 150 mm control type: Siemens spindle revolutions: 30.000 rpm input Power: 4,5 kW working hours: ca. 8.000 Exhaust adjustable granite table spray-and lubrication aggregate Ethernet , AD-ID: A416442 More Infos click here
CNC-machining centre , MIKRON, UCP 710 - mit Schwenkrundtisch NCRST 630, 1 used CNC-machining centre "5-axis" brand MIKRON
model UCP 710 with swiveling top plate NCRST 630
CNC-control: Heidenhain TNC 430
built in: 2001
working range X-Y-Z 710 x 550 x 500 mm
table surface clamping 630 mm
accessories::
- spindle 20 000 rpm
- tool taper HSK 63A with through the spindle coolant - swiveling rotary table NCRST 630 - cooling device 18 bar with filter & chip conveyor
- roto clear
- oil fog exhaust
- oil fog spray cooling
- hand wash device
- full protection cabinet, lateral sliding door
- security glass - mobile elektr. handwheel TNC 426/430
- ethernet-connection card
- even move into the area TNC426/430
- spindle temperature compensation
- tool measurement with laser
- preparation setting-up tracer MP12/700
* WORKSHOP TESTED MACHINE *
Condition evaluation: approx. 9 on scale of 1 (bad) to 10 (new) NOTE: An effort has been made to assure the above specifications are accurate, however, it is the sole responsibility of the buyer to confirm the actual model, capacity, attachments, accessories, extras and condition. We urge buyers to inspect all machinery and equipment prior to purchase.
Subject to Prior Sale., AD-ID: A358673 More Infos click here
V-BAZ / Vertical Machining , DECKEL, DC 50V, , x 650 mm-way y-way 500 mm z-way 500 mm table size 500 x 400 mm WZ recording SK 40 tool magazine 30-fold speeds 20 - 8000 rpm feeds 0 -- 10000 mm / min Rapid traverses 15 000 mm / min values Electrical 380 V / 50 Hz main drive 35 kW (DC) 15 kW spindle motor weighing 6.5 tonnes space 4 x 3 x 3 m pallet changer 2-way dialogue control 112nd Machine is in very good condition. AD-ID: A465302 More Infos click here
CNC universal - processing center , WABECO, CC F 100 - 1, , Work area in X: 250 mm work area in Y: 150 mm work area in Z: 250 mm table size: 450 x 180 mm of spindle admission: ISO 30 spindle numbers of revolutions: 100 - 7500 UpM - infinitely variable Vorschubbereich: 1 - 2000 mm of min. Drive power milling spindle: 2.0 KW of 380 V Accessories equipment: CNC control tool shop with 8 places stepless speed regulation AD-ID: A376313 More Infos click here
CNC Universal Machining Center, MANDELI, Model 8, X Travel = 1600 mm, Y Travel = 1135mm, Z Travel = 1000mm, B Travel = 360°
Spindle speeds: 4000 rpm
Main motor: 33 Kw
Tools magazine: 100 pcs.
Tools taper: ISO 50
Table: 2 psc. 800x800 mm
Availlability: June 2008
CNC milling machine , Geiss, , , the machine was taken only at the
beginning of the yearly 2003 in enterprise for reasons of extent of
utilization stands the plant to the sales to some data (more data and
photos see you please programmable in the pdf file after 5-Achsen
milling machine for the treatment of plastics, model construction
foams, wood and aluminum, the number of revolutions by 4.500 to 45,000
U/min additional equipment: Cooling system for spindle, Deutschle
spindle DSW 100, spraying cooling system, tool change station for 12
tools, vacuum table, wedging of B and C-axle, allocation of the engine
room, CIMATRON CAD/CAM job. Technical data of the machine: Machine
table length: 3580 mm broad: 1490 mm of oh ways: X axis: 3500 mm Y
axle: 1500 mm Z axle: 800 mm B axle: 210 C-axle: 520 AD-ID: A424155 More Infos click here
5 - axis - CNC - machining center , Deckel Maho Gildemeister, DMU 125 P, , control Heidenhain Mill Plus, ways x / y / z about 1250/880/800 mm tool changer with 60 positions tool host SK 40, rotary table, swivel head, no IKZ, machinery weight around 15 tons, dimensions L / B / H approximately 4.1 / 3.5 / 2.9 m, approximately 34 000 Einschaltstunden AD-ID: A465454 More Infos click here
universal milling machine, MIKRON, WF 52 C, the machine was refurbished in 2007 by MMD. The machine is in very good condition.
The machine has 1.800 working hours is under power and can be inspected
x-travel 710 mm
y-travel 500 mm
z-travel 500 mm
1000 x 500 mm
stroke of quill vertical 90 mm
tool taper SK 40 transmission ratio 4 turning speeds 20-5000 U/min
rapid traverse longitudinal and cross 6 m/min
rapid traverse 5 m/min
Tool Changer 18 pockets coolant 200 Literaufstell
2,20 x 3,50 height 2,20 m
Weight with angle table and cabin 3800 , AD-ID: A463279 More Infos click here
MAHO LID, DMC 80 U - 5 pages Bearbeitungszentr , DECKEL MAHO, DMC 80 U, , CNC BEARBEITUNGSZENTRUM - 5 SEITENBEARBEITUNG Make: LID MAHO Type: DMC 80 U Built: 1999 CNC control: Heidenhain Mill Plus range X / Y / Z: 800/700/600 NC-mm round table 360 / 0001 of 2 St. pallets 800 x 630 mm H / V Universalfräskopf spindle speed max.: 8000 rpm tool: SK 50 DIN 69871 Automatic tool changer tool magazine: 60 sites production package: 40 bar / 23 l / min [...Technical data truncated] AD-ID: A457030 More Infos click here
universal CNC machining centre, Deckel Maho, DMU 60 T, control Heidenhain TNC 430
X / Y / Z axis 630 / 560 / 560 mm
Table 1000 x 610 mm
C axis: NC rotary table 560 mm
B axis: NC swivel head -91/+12 degrees
Speeds 18000 rpm
ATC 20 stations
Taper SK 40
Equipment: Heidenhain spindle probe, through spindle high pressure coolant
, AD-ID: A456156 More Infos click here
Universal milling center, Willemin-Macodel, W402 (5-Achsen), Offer details Stock-No. 1092-00975 Type of machine Machining Center - Universal Make WILLEMIN-MACODEL Type W 402 Year of manufacture 1987 Type of control CNC Storage location Standort des Abgebers Country of origin Switzerland Delivery time Immediate Freight basis EXW Price on request
Technical details x-travel 450 mm y-travel 300 mm z-travel 480 mm control NUM 760 turning speeds 50-10.000 U/min rapid travel x/y/z 10.000 mm/min tool change unit 48 Werkzeuge/tools ISO 30 b-axis 0-94° ° c-axis 360° total power requirement 13,5 kW weight of the machine ca. 4 t dimensions of the machine ca. 3 x 2,3 x 2,3 m
milling machine, Mori Seiki, MV 40 B, Verfahrwege (X x Y x Z): 800 x 410 x 510 mm Tischgröße X: 1.100 mm Tischgröße Y: 450 mm Werkzeugwechsler: 30 - fach Steuerungstyp: Fanuc 10 M Spindeldrehzahl: 8.000 U/min Spindelaufnahme: BT 40 Antriebsleistung: 5,5/7,5 kW Eilgang: 20/20/15 m/min max. Werkzeugdurchmesser: 80/125 mm max. Werkzeuglänge: 250 mm max. Werkzeuggewicht: 8 kg 4. Achse (Rundtisch) , AD-ID: A464186 More Infos click here
Machining center , Deckel, FP5 NC, , Machine no.: 2806-0500 control: Dialogue 4 Built: 1986 axes: 3 Travels: X: 710 mm Y: 600 mm Z: 400 mm Speed: 18-6300 rpm tools: SK 40 drive power : 8 kW Pinolenhub: 80 mm Weight: about 3800 kg condition very well under current machine can be visited. Lt photo accessories AD-ID: A464748 More Infos click here
UNIVERSAL BEARBEITUNGSZENTRUM , DECKEL MAHO , FP 4-60, , CNC control BAHNSTEUERUNG DIALOG 12 for three AXLES with BTR-way NACHLADEBETRIEB x 600 mm y-way 500 mm z-way 450 mm tool host SK 40 drive power 10 kW Pinolenhub vertically 80 mm Tischaufspannfläche 900 X 530 mm factory weighing 400 kg feed area 2-6000 mm rapid traverse the area 15/20/20 mm total power demand 16 kW machine weight 3.6 tons space requirements 2.0 x2, 0x2, 0 m speed range 32-5000 rpm AD-ID: A451887 More Infos click here
CNC milling machine , Deckel , FP 4 ATC, , - Verfahrwege approx.: X: 560 mm, Y: 500 mm, spindle nose to table: 500 mm - Control: Contour 3 like dialogue 4 - number of revolutions: 4000 rpm - Werkzeugaufnahme: SK 40 - Tool shop of more fuer 20 tools - milling head tiltable - spraying protection cab - electrical handwheel - weight approx.: 2970 kg - Transportation mass approx.: 3 load meter A mistake with the attitude data we reserve ourselves AD-ID: A424105 More Infos click here
BAZ 5 axis , Deckel MAHO, DMU60P, , 5 axis machine with Mill plus control in good condition, further data and photos on request AD-ID: A458745 More Infos click here
Processing center universal 5 axles , Deckel Maho, DMU80P hi-dyn, , Heidenhain 426 control table Size: 630x900 mm Maximum table load: 1.000Kg up to speed: 12,000 rpm tool changer: 60 positions, SK40-DIN 69871 travel X / Y / Z: 800x700x600mm Schwenkkopf (vertical / horizontal) NC gesteürter Round Table (C axis) positioning: 0001 Rapid traverse X / Y / Z: 50m/min drive power (100/40%): 19/28kW footprint approximately: 4.200x4.700 mm Machine Weight: 14,000 kg accessories: Bet [...Technical data truncated] AD-ID: A440100 More Infos click here
CNC Machining Center - Universal , HURON, EX-C, x-travel 1600 mm y-travel 1400 mm z-travel 800 mm control Siemens 840 D number of controlled axis 5 table-size 800 x 700 mm no. of tools in magazin 32-fach (pos.) tool taper HSK table load 1,2 t Number of working hours 3133 h feeds 1 - 30000 mm/min spindle drive 25 kW spindle turning speed range 14000 U/min voltage 380 (50 Hz) V total power requirement 60 kW weight of the machine ca. 17,5 t Accessories several tool holders, AD-ID: A445900 More Infos click here
milling machine, Bridgeport, TQ 2G, Travel axes (X x Y x Z): 560 x 406 x 508 mm table size X: 1.160 mm table size Y: 425 mm max. workpiece weight: 340 kg tool changer: 22 - time control type: Heidenhain TNC 370 spindle revolutions: 25 - 7.500 rpm spindle holer: SK 40 input Power: max. 7,5 kW feed rate: bis 18.000 mm/min working hours: ca. 14.000 spindle hours: ca. 3.800 Eilgang 18 m/min 3D-Taster Heidenhain TS 632 Post-Prozessor für SolidCam Strahlkühlmittelanlage Automatisches Zentralschmiersystem Späneschutz mit elektr. gesicherten Türen , AD-ID: A453088 More Infos click here
Machining Center-Universal, MIKRON , UCP 600, x-travel 530 mm
y-travel 450 mm
z-travel 450 mm
control Heidenhain iTNC 530
C-Axis 360 °
B - Axis -15 / +122 °
table surface area 250 x 250 mm
rapid traverse 22 m/min
feeds 15.000 mm/min
feed power 5.000 N
tool magazin: 30pos.
tool taper HSK 63A
max. tool diameter 90 mm
max. tool length 250 mm
max. tool weight 6 kg
rotary table tiltable
max. table load 200 kg
T-slots 4
T-slot - distance 63 mm
T-slots 14H7
power capacity - milling spindle 16 kW
turning speeds 100~20.000 U/min
total power requirement 44 kW
weight of the machine ca. 6,4 t
dimensions of the machine ca. 2,5 x 1,6 x 2,65 m
Chip conveyor
Coolantsystem
oil cooler
paper band filter
breakage control
renishaw probing, AD-ID: A456162 More Infos click here
Machining Center - Universal , DECKEL-MAHO , DMU 50 T , x-travel 500 mm y-travel 400 mm z-travel 400 mm control Heidenhain iTNC 530 table-size 700 x 500 mm total power requirement kW weight of the machine ca. 3,2 t dimensions of the machine ca. 3,06 x 1,7 x 2,47 m , AD-ID: A459532 More Infos click here
Universal milling machine tool , MIKRON, UMS 900, , CNC - milling machine tool spindles with two interchangeable! Spindle 1 vertical milling head 6.300U/min SK 40 max 800 Nm Spindle 2 Hochgeschwindigkeitsfräskopf 3000 - 42,000 rpm. HSK 40 / 11 KW Travel: X 900 Y 630 Z 500mm table: 1200 x 600 tool changer for SK 40 + HSK 40 minimum quantity lubrication coolant system for external cooling control: Heidenhain TNC 426 Bedienhandgerät Heidenhain machine is free from October! AD-ID: A462940 More Infos click here
