Tool pre-setting equipment , ZOLLER, bravo 1, , * * Endlosfeineinstellung handed control grip ZOLLER * PC * spindle brake electronics projector diameter = 150 mm precision spindle SK 50 = Z = measuring 400 mm in diameter measuring X = 250 mm max. Weight = 30 kg 140 kg L x W x H = 990 x 630 x 1,825 mm AD-ID: A422165 More Infos click here
Handle micrometer screw , TESA, , , with tungsten carbide measuring
surfaces with 4 replaceable anvils around 25 mm rising range of
application 300 - 400 mm AD-ID: A354186 More Infos click here
IPC Black-Box/WB-05 DCC Controller, ICNCMT, , IPC Black-Box/WB-05 DCC Controller for RETROFIT of Measuring Machines
ADVANTAGES :
-for customer optimized retrofit of a 3D-Coordinate Measuring Machines (CMM), no matter if manual driven or DCC.
-Reliability and flexibility by well-tried and world-wide experienced software
-Spares the cost for new constructions and facilities (CMM, measuring room, environment and temperature control, a.s.o.)
3D-Coordinate Measuring Machines (CMM) represent a high investment. This is the reason why they should be in use over many years. Mostly the CMM’s are moving on air bearing, this is why they have practically no wear, opposite to the other machine tools. While in most cases the mechanics of a CMM is as good as new, especially if the CMM was serviced normally, the DCC electronics, along with the hard- and software of the evaluation system became over few years obsolete, due to the rapid pace of the technical development in electronics and computer area.
We offer with the Black-Box/WB-05 DCC Controller an optimal, economical solution of your measuring problems, shaped on your needs.
The retrofit of your existing CMM’s is a cost-effective alternative to buying a new CMM.
The efficiency of the measurements is the same as for a new machine
Measuring Plate, HAHN & KOLB, MU-TRIMOS, Length: 1000 mm, width: 750 mm, floor-plate height herself: 220 mm, floor-plate mounted on the table: 1030 mm, weight ca.: 460 kg, total dimension of the complete unit l/w/h: 1000/750/1450 mm. Lower cupboard on the right side with 7 telescopic draws. Mounted onto base unit with following units: 2 teilstocks with centers and prisms surface, centre heights 350 mm, prisms 380 mm, NINI-vertical electric measuring "TRIMOS" TM 301-1936/ID-0, measurement range 0-320 mm., AD-ID: A467765 More Infos click here
Iron sections working machine Mubea junior BF 10, , , , kerf width St 37
150mm cut strength max ST37 12mm work height 600mm flat iron 100 x 12
mm square iron 28 x 28 mm round steel bar 30 mm of Antribsleistung
1,5Kw weight 450kg, space requirement L*B*H 900mm*750mm*1600mm AD-ID: A249149 More Infos click here
Coordinate measuring machine, Eigenbau, , , Travel: X / Y / Z 1300 x 600 x 100 mm, for gauging of Holzpanelen or similar hand-held linear measuring system with digital display Heidenhain in 3 axes AD-ID: A256350 More Infos click here
Measuring Machine, STIEFELMAYER, Metrolog. XGL.IV Man, x-way 3000 mm y-way 1600 mm z-way 1800 mm Space 3000 x 2000 mm Calibrated by Trimek to 24.02.2006 Series No. 22001084 Nature: Manual, AD-ID: A458872 More Infos click here
3D-Koordinatenmessmaschine , KOMEG Voelklingen, KMS 10/ 8/ 8 FAC, , Electricity 220 V / 16 A, Luftvesorgung bar 4-6, 7-8 l / min, granite plate measuring 1350 x 1350 x 300 mm, usable land measuring 1350 x 1000 mm - Max. Table load 1000 kg, measuring 1000 x X Y Z 800 x 800 mm, Compaq Computer Software MS DOS 6.0 / U-Soft 8.41, Windows 3.1 Tastsystem Renishaw (PH Probe 1 / probe TP 2-5 W), AD-ID: A440247 More Infos click here
Straightness measuring machine with macro graph, Wenzel / Mahr Perthen, Makrograph / MLWS - 37 AZ 52, , Disk size 2000 x 600 x 230 mm, x-movement by means of air cuts 1100 mm, - synchronously to the macro graph, perpendicular way (Z) 560 mm, arm 900 mm, t-slot, MACRO GRAPH, Fabr. MAHR PERTHEN, type MLWS - 37 AZ 52 AD-ID: A199939 More Infos click here
3D Coordinate Measuring Machine Zeiss UMC 550 DCC, Zeiss, UMC 550, Zeiss UMC 550
Measuring volume X= 550 mm
Y= 1200 mm
Z= 450 mm
Contruction type: Moving portal
Dimensions: Legth = ca. 2040 mm
Width = ca. 1300 mm
Height = ca. 2750 mm
Probe head: latest Leitz probe head, measuring type
Free height under portal:600 mm
Weight of the CMM : ca. 3,1 t
Air supply : Air pressure 6 to 10 bar, clean filtered and oil free
Air consumption ca. 4 l/min.
Electrical power supply:AC 220V, 50 to 60 HZ
Environment temperature:20°C +3C°
Tool changer : latest Leitz model for the Leitz probe head
Computer:Windows XP computer and printer according to the
technical state of the art at the delivery date
Software:Quindos Basis 7.0 CAD-based evaluating software,
which also includes among other features:
-Measuring of standart geometrical elements
-Online/Offline generation of probing points
-Free programming of procedures and loops
-A graphik package for individual plots
-Position and form tolerances acc. to ISO R1101
This is a retrofitted machine, completely renewed, brand-new in our work been mounted and tested..
The final accuracy test demonstrated an unusual high accuracy for this kind of machine kinematics.
Measurements and Anreißmaschine , Stiefelmayer, CSE 3D, , execution with management ruler (Stiefelmayer system B) measuring system: digital display (nonius) = 4395 for X, Y and Z = 1600 = 2400 axis including 2 chip inserts and 1 needle rice and rice plate (4x2m) 0 , 59m height and 12to resilience. NP 44,000, -- AD-ID: A457984 More Infos click here
tool presetter , Zoller, EG 1800, measuring range X-axis 370 mm measuring range Z-axis 420 mm projection area 150 mm amplification -fold 20 weight of the machine ca. t dimensions of the machine ca. 1,7 x 0,9 x 1,7 m Additional information Tool messuring machine with digital read out ZOLLER 6051 und tool clamping device for VDI40, VDI 50, SK 40 und SK 50. , AD-ID: A449881 More Infos click here
Top plate , MORA, Ø 800 / 1000 mm , , NEW..... dirt grooves mounting holes load up to
5096 kg of protective grounding is possible for 800/1000 mm of
accuracy up to 0.02 mm with digital degree announcement from
qualitatively high-quality steel 45 organizations (to be outlined) in
any point AD-ID: A354139 More Infos click here
Tool adjusting equipment , Zoller, EG 1800/644, , Tool attitude equipment of the company Zoller type 1800/644 Bj. 1981 x-away 420 mm y-away 370 mm Heidenhain measuring system + payers with both measuring systems muessten the sealing rims to be renewed x axis measuring system are probably measuring head verdreckt! Defectively! Pictures on request! Ask around requirement! AD-ID: A432488 More Infos click here
3D Coordinate Measuring Machine Apollo Sheffiled DCC, Sheffield, Apollo RS-50, Measuring machine Apollo RS-50 DCC Sheffield Measuring range: X = 1200 mm Y = 970 mm Z = 670 mm
Design: Mobile, closed portal
External dimensions:
h= 3600 mm b= 2000 mm t = 2600 mm Weight/KMG: approx. 3 t Length
measuring uncertainty: U1 = (6 + 6L/1000) m L in mm Maximum table load: 2,500 kg Compressed air feed circuit: Minimum air pressure 6 bar, oil-free consumption approx. 150 Nl/min Electrical connection: 220 V/50 up to 60 cycles per second Environment temp to Adherence to the accuracy environment temp: 20 C + 1 C Temp. - gradients/hour: 0.7 K/h temp. - gradients: 0.7 K/m computer: PC with printer after newest state of the art
Software: Quindos with the program modules Basis Form and position tolerances Statistics Basis Diagram Ball disk monitoring controller:WB.05 incl. installation not incl. transport, insurance and packing
The machine is brand-new in our work been mounted and tested,
, AD-ID: A449680 More Infos click here
3D Coordinate Measuring Machine DEA IOTA 0102 DCC, DEA , DEA 0102, Measuring volume:
X= 625, Y= 1025, Z= 465
incl.Software Quindos6
Probehead Renishaw PH9 + TP2/TP20
Incl. PC and Printer
incl. installation not incl. transport.
Overall Dimensions: 1929mm x 1257mm x 2720mm
Weight: ca. 3 t
The machine is in a very good condition, actually not a "used machine", but completely new rebuilt with new CNC WB05 electronics (Leitz Protocol as machine language), cables, air pipes, Leitz 2-joystick jogbox, aso. (The machine was originally built in the middle of the '90s).
Incl. installation not with transport insurance and packing.
, AD-ID: A449669 More Infos click here
3D - Measuring and scribe and drill machine , ZETT - MESS, AMS 10/12, , * May 2006 last calibration table size = 2.500 x 1.500 mm Range Y / Z = 1.200/1.000 mm AD-ID: A422713 More Infos click here
Measuring Machine, ZEISS, Vista, X-way 400 mm y-way 500 mm z-way 350 mm Machine weight 400 kg Space 1036 x 998 x 1436 mm Permissible piece mass 410 Kg Undercurrent Each time to visit, AD-ID: A458878 More Infos click here
measuring machine, MicroXcel, 765 Lv III, Travel axes (X x Y x Z): 750 x 650 x 500 mm Meßbereich: MicroXcel 765 Grundgerät mit Steuerelektronik (IMB) Z-Mouse Referenzkugel Kugeltaster starr Bedienungsanleitung 2 St. Anschlußkabel Elektronische Tastsystem und Zubehör Dreh-Schwenkkopf Renishaw TP-ES , AD-ID: A454299 More Infos click here
Gear wheel measuring machine , MAHR, , , Workpiece max. 240 mm Point distance of the vertical Workpiece clamping device min 100 mm Max. 260 mm Hoehenverstellung D. Palpation device by crank handle 120 mm gr. Distance plunger vert. Koernerspitze 250 mm Away the workpiece carriage by crank handle adjustably 200 mm Away the tracer carriage by crank handle adjustably to the right and on the left of ever 130 mm Measured value registration on web, width 50 mm Measured value enlargement 1: 500 Diagram aspect ratio adjustable in the relationship 1: 1, 1: 2, 1: 4 Accessories: Palpation points m = 0,5 1, m = 1 1,25 m = 1,5 2,5, m = 4 6 External dimensions: Width 700 mm Laenge 900 mm Hoehe 900 mm Weight approx. 100 kg AD-ID: A415157 More Infos click here
Tool pre-setting equipment , SOMET, SPX 200 U, , bridge adjustment crosswise 220 mm
of carriage adjustment 350 mm of enlargement of the projector 20 x
ground-glass plate 150 mm of set accuracy of the cut 0.005 mm reading
off the coordinates of the tools opt. OFD FAE 4 min. measurable length
0.002 mm of operating voltage 220 V of external dimensions: Length 800
mm broad 700 mm height with Untertisch 1650 mm weight approx.. 400 kg AD-ID: A415147 More Infos click here
Setting-u. Meter , Zoller, Saturn 2 , V720 B2, , Compl with label printers LP 2824, tool weight: max 20 kg 2 screens AD-ID: A471058 More Infos click here
NC - measuring machine , Ferranti Merlin, Micro 900, , X - Way: 1100 mm Y - Way: 1100 mm Z - way: 800 mm passage between the stands: 800 x 500 mm table dimensions: 1400 x 1900 mm machine weight: about 2000 kg space: 2 , 50 x 1.80 x 2.50 mtr. Accessories / Equipment: NC gesteürte universal Digitizing - and measuring machine Micro 900 in portal design various probe CDK - Universal - Software - with a screen system, floppy disk, etc. manülles and automatic surveying and digitize [...Technical data truncated] AD-ID: A449135 More Infos click here
Environment temperature : 20°C
Daily temperature fluctuation:+1°C
Temperature fluctuation overlaid:: + 1°C Minimum 4 cycles per hour Maximum temperature change 1° C
Air supply: Air pressur: 5,2 bar Air consumption ca. 50 NL/min
Computer:Windows XP computer and printer according to the technical state of the art at the delivery date
Software: Quindos
incl. installation not incl. transport insurance and packing
The machine is brand-new in our work been mounted and tested,, AD-ID: A449676 More Infos click here
Tool pre-setting equipment , ROYAL, 2 HP 400-250, , carriage adjustment crosswise 250
mm of carriage adjustment developed along 400 mm of werkzeugaufnahme
SK 40 projector 120 mm of enlargement 20 subject with digital display
EPA of 02, on table external dimensions: Width 1150 mm of depth 700 mm
height of 1800 mm AD-ID: A415150 More Infos click here
3-D-Koordinaten-Messmaschine , Olivetti, Inspector Maxi 610 V, ,
with top plate Durchm.: 900 mm, (4th axle), measuring surface: X =
1140 x Y = 900, Z = 600 mm, (software on most modern conditions), cat
25-Messsystem, Renishaw pressure foot, much accessories, 3650 kg, max.
Table load 1500 kg AD-ID: A388756 More Infos click here
Variset Royal , ROYAL, ASN , , Specifications: Royal Variset tool Voreinstellgerät no bearing type 2054 ASN Built in 1990 price on request category measuring device description Qürweg table width 250 mm mm mm longitudinal table length 900 mm with Mannesmann 80 PC printer tool Voreinstellgerät with Royal CNC ASN 2-Bildschirmsteürung with automatic Beladeportal 3 motion axes with z absolutely new revolving grabs AD-ID: A385928 More Infos click here
3D CoordinateMeasuring Machine, DEA , IOTA DIAMOND 0101 CNC / DCC, 1.DEA-IOTA: DIAMOND 0101 DCC measuring range: X = 590 mm Y = 590 mm Z = 440 mm Design: Portal building method Dimensions length : 1500 mm Width: 1200 mm, Height: 2800 mm weight/KMG: approx. 3 t
Positioning uncertainty 1:+4.0µm
Positioning uncertainty 3:+4.5µm
Maximum table load: 1,000 kg
Compressed air feed circuit: Minimum air pressure 5 bar, consumption approx. 150 Nl/min
Electrical connection: 220V/50 to 60HZ
Environment temp. : 20 C + 3 C
2.PC with printer after newest state of the art
3.Software Quindos with the program modules ...Basis
...Form and position tolerances ...Statistics Basis ...Diagram Ball ...disk monitoring
Tool , Kelch, Trabant 361, , - host SK 50 - Temporary plate with reductions for SK 40, HSK 63, VDI 40 - measuring 600 mm height - tool diameter 400 mm - digital display - Under frame with box AD-ID: A450532 More Infos click here
Tool pre-setting equipment , Carl Zeiss Jena, WDO 160 x 315, , carriage adjustment crosswise 315
mm of carriage adjustment along 160 mm of werkzeugaufnahme 40 mm
reading off the coordinates of the tools opt. OFD FAE 4 min.
measurable length 0.005 mm of operating voltage 220 V of external
dimensions: Length 650 mm broad 700 mm height with Untertisch 1500 mm
weight approx.. 200 kg AD-ID: A415152 More Infos click here
measuring machine, Mitutoyo, B 706, Travel axes (X x Y x Z): 700 x 600 x 450 (600) mm table size: 860 x 1.280 mm max. workpiece hight: 570 (720) mm max. workpiece weight: 500 kg Ausstattung: - Software Geopak 3 Version 3.04 - PC mit Monitor, Tastatur, Maus - Matrix-Drucker - Tasterset Renishaw PH1/TP2 - Referenzkugel , AD-ID: A453139 More Infos click here
Teileaperate / rotary tables , , , , 4 piece rotary tables Company: Type: about 400 mm With some feed Bauj.: condition: good costs: EUR 300 also must individually. 2 pieces Teilaparate Company: Type: see photo Bauj.: condition: good costs: EUR 300 also must individually. Location: Remscheid delivery time: Between unsold. AD-ID: A468618 More Infos click here
Voreinstellgerät tool , Zoller, V 420, , X range - how: 150 mm measuring range Y - way: 400 mm tool: ISA 50 piece diameter max. 200 mm piece length: max. 350 mm machine weight: about 150 kg space: about 1.20 x 0.60 x 1.10 mtr. Accessories / Equipment: 2 axis digital display label printer AD-ID: A449586 More Infos click here
Measuring Machine , LEITZ, UWM I, , bearing no.: 1035-01893 control: Universal measuring conventional microscope with ballast, with goniometer eyepiece, according Lens 1: 1 and 5:1 Vergösserung 10, 20, 30, 50, 100, 150 times smaller peak Bock, Auflichbeleuchtung , User manual x-axis 150 mm y-axis: 75 mm Table size: 310 mm Machine Weight: 0.05 t AD-ID: A446801 More Infos click here
coordinate measuring machine, MITUTOYO, FN 905, x/y/z 900x550x450 mm
The machine will be sold at the online auction A.T.C. GMBH.
To take part in our auction and for further questions please register on our site.
Closing Date: Tuesday, 11th November 2008, closing time from 2 pm (time-shifted) Location: Im Haslet 36-38, 93086 Wörth an der Donau (Germany)
Viewing: Wednesday, 5th November 2008, 9 am – 5 pm
Thursday, 6th November 2008, 9 am – 5 pm
, AD-ID: A481531 More Infos click here
3D measuring machine, JOHANSSON, Cordimet, 700M, measuring size 700x450x350 mm, with “Renishaw” measuring head
The machine will be sold in the online auction „SANMINA SCI Enclosure System AB“
To take part in our auction and for further questions please register on our online-site.
Closing Date: Wednesday, 29 October 2008 from 3 PM Location: Sanmina, Sörbyvägen 7, 571 78 Forserum [Schweden]
Viewing: Wednesday, 22 October 2008 (11 pm to 3 pm) Please contact TROOSTWIJK SWEDEN
, AD-ID: A476963 More Infos click here
