Spiral Bevel Gear Machine, KLINGELNBERG, AFK 203, used spiral Bevel-gear-machine, KLINGELNBERG, AFK 203, dia.=540 mm, Modul = 8, AD-ID: A307979 More Infos click here
Spiral Bevel Gear Cutting Machine , Oerlikon, S 17, Technical details max. wheel diameter 400 mm gear width ca. 60 mm max. module 8,5 mm min. module 1,5 mm blade head turning speeds 40 - 250 U/min spindle bore 78 mm swivelling range -7° / 90° deg total power requirement 18 kW weight of the machine ca. 10,2 t Condition: Excellent.
Inspection under power possible., AD-ID: A338503 More Infos click here
Table size 250 mm
Table bore 100 mm
Distance between table and shaper head, approx. 265 mm
Total electrical load, approx. 25 kW - 380 V - 50 Hz
Weight 6,500 kg
Accessories / Special Features
* SIEMENS Memory Programmable Control, Model S5, with fault diagnosis.
* All feeds can be numerically set with counters.
* Counter mechanism for 1st and 2nd roughing cycles, followed be finishing cycle, with relevant feed amounts and number of strokes.
* Workpiece counter which switches off machine after a preset number of workpieces so tool can be changed.
* Hydrostatic shaper-spindle guides.
* Machines are raised 60 mm with raiser plates.
* Currently equipped with rotary workpiece loading device.
* Hydraulic workpiece clamping device with hydraulic counter bracket.
* Switch cabinet. * Hydraulic unit. * Coolant feed. * Fully covered working area.
* Loading device can be easily removed if not required
* We can deliver, for an extra charge, A FELSOMAT CNC Controlled Swivel-Arm Robot for loading and unloading blanks/finished parts into/out of the rotary loading device.
Condition : Very good. Machines can soon be inspected under power.
Delivery : Ex stock, as inspected.
Payment : Net, after conclusion of contract.
, AD-ID: A284703 More Infos click here
MAKE: MAAG Gear Shaper
MODEL: NBP 40 - 12.5m capacity Helix angle 45 deg
Description: Machine Weight: 110 tons
Maximum work load on table: 40 tons
Maximum Height: 1,300
Helix angle: 45 degree
Maximum No. Of teeth to be cut: 400 teeth
Minimum no. of teeth to be cut: 40 teeth
FURTHER PICS ON REQUEST
Specification: Max Dia to be cut: 12,500mm
Min Dia to be cut:
Tables available:
Bigger Table: 3,665mm
Smaller Table: 2,540mm
Max Module to be cut through generation process: 40 Mn
FURTHER DETAILS ON QUOTATION
YOM Early 1970's, but re conditioned by MAAG in 1995.
UNDER POWER
MACHINE ABOUT 2 HOURS FROM DELHI
Country: India
Availability: 4/11/2008
PRICE: $ 780.000 usd
, AD-ID: A433651 More Infos click here
Gear Tooth Rounding Machine, HEY (GB), No. 10,
Max. workpiece Ø 250 mm
Max. workpiece length, approx. 150 mm
Max. no. of teeth 160
Max. module 6
Workpiece headstock, swivelling 40 °
Weight, approx. 1,000 kg
Condition : Good. Machine can be inspected under power.
Delivery : Ex stock, as inspected
Payment : Net, after conclusion of contract
, AD-ID: A319782 More Infos click here
Min. work piece dia. – 800mm
Max. work piece dia. – 8000mm
Max. module for the wheels (dia. up to 5000mm)
for steel – 30
for cast iron – 40
Max. module for the wheels (dia. over 5000mm)
Max. milling length for spur wheels and slanting wheels – 2000mm
The max. travel of the milling spindle – 900mm
Max. cutter’s dia. – 400mm
Max. cutter’s length – 500mm
Outward dia. of the table – 4000mm
The hole dia. in the table – 800mm
The hole length in the table – 1500mm
The number of cogs of the index gear – 285
Max. load on table – 60 tons
The distance between the cutter axis and the table surface – 820mm (min); 3200mm (max)
The distance between the cutter axis and the surface axis – 500mmm (min); 4250mm (max)
The cutter rotation: Number of stages – 16
The limits of the number of rotation – 10-56 per minute
The power of the main drive – 20kw
The machine weight – 206 tons
Köpfer 150 , Koepfer, 150, , Largest Pitch module: 2 Largest Fräsdurchmesser mm 145 largest Fräslänge mm 110 mm 280 largest einspannlänge smallest number of teeth 6 (1) AD-ID: A458876 More Infos click here
Gear Shaper , Liebherr , WS1, Max. wheel diameter 180 mm Max. gear width 45 mm Max. milled module 4 mm
Platform size l x w x h 2760 x 3930 x 2500 mm
Weight 6000 kg
, AD-ID: A351174 More Infos click here
Hobbing machine OFA 16 A, TOS, , Hobbing machine OFA 16 A Producer TOS
Location Czech Republic
Max. milled wheel diameter 160 mm
Max. milled module Morse 4 Main motor output 5,5 kW
Platform size l x w x h 1990 x 1640 x 1665 mm
Weight 3650 kg
, AD-ID: A307550 More Infos click here
Gear Shaping Machine , LORENZ, LS 150, max. wheel diameter 150 (280) mm gear width 42 mm max. module 3 max. workpiece diameter at exterior gearing 150 mm min. workpiece diameter-at internal hobbing 280 mm table diameter 250 mm table hole 100 mm stroke 0 - 50 mm no. of strokes 265 - 750 + 450 - 1250 Hub/min down feeds 0,002 - 0,15 mm/Hub roll feed 0,06 - 12,26 mm/Hub total power requirement 8,8 kW weight of the machine ca. 5,7 t With chip (swarf) conveyor, AD-ID: A338883 More Infos click here
Zahnradabwaelzfraesmaschine koepfer 110 (20-14-005) , , , , 20-14-005 Zahnradabwälzfräsmaschine Köpfer 110 max. Module: 1 including about 40 + Abwälzfräser exchange wheels! Additional accessories on request! Errors and input errors! Further technical data on request! Machine is at our camp, and once zuvoriger appointment from Monday from 08.00 - 17.00 clock visited! AD-ID: A351560 More Infos click here
Thread Milling- and Hobbing Machine, Wanderer, 31 NU-220-2000, new in approx. 1976
Technical details threading length 2010 mm workpiece dia. over saddle 200 mm hobbing length 2010 mm milling depth max. 32,5 mm pitch min. 1 mm pitch max. 1000 mm spindle bore 120 mm milling head -swivable 30°links/65°rechts Grad 27 - 160 U/min. centers total power requirement ca. 5 kW weight of the machine ca. 4,2 t , AD-ID: A305143 More Infos click here
Gear Grinding Machine, HOEFLER, H3000, max. wheel diameter 3000 mm
gear width 1500 mm
module max. 32/40 mm
module min. 3 mm, AD-ID: A432306 More Infos click here
Gear Grinding Machine , HOEFLER, H 1250 / 1500, max. wheel diameter 1500 mm gear width 500 mm max. module 20 min. module 1,5 max.helical angle 35 ° min. number of teeth 12 max. number of teeth 432 table diameter 1000 mm grinding slide stroke 50 - 550 mm strokes - infinitely variable 45 - 200 Hub/min workpiece weight 6000 kg grinding wheel diameter 270 - 350 x 127 mm root circle dia. min. 80 mm total power requirement 75 kW weight of the machine ca. 26,8 t
Machine with grinding slide with automatic dressing device, counter support with motorized vertical adjustement, hydrostatic, changing wheels, oil mist suction device, Optical angular-position measuring system, temperature regulating system, dynamical grinding wheel balancing device, driving ram slue and complete covering of the working area., AD-ID: A458760 More Infos click here
MACHINE IS EQUIPPED WITH THE FOLLOWING: * 3-Cut Cycle * Variable Stroking Speeds * Complete electrical equipment for the standard machine * Hydraulic Unit * Cutting Depth Setting (Mechanical) * Rapid Traverse motion and table setting attachment * Radial Fast Power Traverse * Manual and Electrical Prints, AD-ID: A430026 More Infos click here
Gearshaper, LORENZ, LS150R, External gears, max. Ø 150 mm
Gear width, max. 16 mm
Module, max. 3
Internal gears, max. Ø 60 + cutter Ø mm
Internal gears, max. workpiece Ø, approx. 280 mm
Length of stroke 0 – 20 mm
Adjustment of stroke 0 – 70 mm
No. of double strokes per minute, approx. 1030 / 1150 / 1300 / 1450 / 1630 / 1830 / 2040
Table size 250 mm
Table bore 100 mm
Distance between table and shaper head, approx. 175 mm
Total electrical load, approx. 15 kW - 380 V - 50 Hz
Weight 6,500 kg
Accessories / Special Features
* Column is tilted to the right for relief work by inclined raiser plate 5° 51´51”.
* SIEMENS Memory Programmable Control, Model S5, with fault diagnosis.
* All feeds can be numerically set with counters.
* Counter mechanism for 1st and 2nd roughing cycles, followed be finishing cycle, with relevant feed amounts and number of strokes.
* Workpiece counter which switches off machine after a preset number of workpieces so tool can be changed.
* Currently equipped with rotary workpiece loading device.
* Hydraulic workpiece clamping device with hydraulic counter bracket.
* Switch cabinet. * Hydraulic unit. * Coolant feed. * Fully covered working area.
* Loading device can be easily removed if not required
* We can deliver, for an extra charge, A FELSOMAT CNC Controlled Swivel-Arm Robot for loading and unloading blanks/finished parts into/out of the rotary loading device.
This machine is very suitable for mass production jobs, due to very high (2040) number of strokes per minute, and the loading device. The tilted intermediate table was being used for relief shaping of synchronised rings, but it can be easily removed if not required.
Condition : Very good. Machine can soon be inspected under power.
Delivery : Ex stock, as inspected.
Payment : Net, after conclusion of contract.
, AD-ID: A284706 More Infos click here
Heavy Duty Gear Grinder, HOEFLER, H 2500 / 1200, Gear Æ, min. / max. 180 / 2,500 mm
Module 3 – 32
Helix angle, max. 10 – 35 °
Gear width for straight gears 1,200 mm
Stroke length, approx. 100 – 1,200 mm
No. of strokes 80 – 350 /min
Stroke position adjustable 300 mm
Stroke speed 4 – 40 mm
Max. weight of workpiece, approx. 18,000 kg
Min. / max. no. of teeth 16 / 576
Table size x bore 1,400 x 500 mm
Grinding wheel Ø, approx. 500 mm
Grinding wheel peripheral speed 34 m/s
Total electrical load, approx. 45 kW - 380 V - 50 Hz
Weight of machine, approx. 60,000 kg
Accessories / Special Features:
* Hydrostatic guides in grinding slide, table and in all other guideways.
* Completely covered working area with sliding doors.
* Automatic grinding process for various cycles, with settings for roughing, finishing, fine finishing and automatic dressing cycle after preset number of teeth.
* Profile correction is possible via appropriate dressing, as well as additional movement of grinding slide (depth and width crowning).
* Approx. 50 change gears. * Grinding slideTilt display device.
* Large coolant device with band filter and oil mist exhaust.
* Separate switch cabinet. * Separate hydraulic unit. * Separate oil cooling unit.
Condition : Very good. Machine can soon be inspected in our showrooms. It is not under power at present.
Delivery : Ex stock, as inspected.
Payment : Net, after conclusion of contract.
The machine comes directly from a first class gear factory, where it was grinding Quality 5 – 6. Grinding diagrams are available. This type and quality of machine is rarely available.
Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.
, AD-ID: A320603 More Infos click here
Universal Wälzfräsmaschine , Koepfer, 150, , Largest Pitch module: 2 Largest Fräsdurchmesser mm 145 largest Fräslänge mm 110 mm 280 largest einspannlänge smallest number of teeth 6 (1) AD-ID: A458900 More Infos click here
Zahnradstossmaschine , Lorenz, LS 150, , Maschinenart Zahnradstossmaschine make LORENZ type LS 150 R Built in 1987 CNC control mode storage Karlsruhe Germany country of origin immediately cargo delivery time from base camp Technical Details diameter - max. 150 (outside) Radbreite mm 16 mm module - max. 3 module - min. Total power needs 15 kW machine weight about 6.5 tonnes of space-sensitive information about m max. Cycling outside 150 mm max. Radbreite 16 mm module max. 3 Max. Verzah [...Technical data truncated] AD-ID: A470312 More Infos click here
Hob, large post, versch. Sizes, teilw. unbenutzt, , , approx.. 100 pieces module 4 to 8,
and 3 shepherd crates fully module 2 (approx. 66 pieces), tlw.
original-pack and unused, right or left-handed AD-ID: A223064 More Infos click here
rack milling machine, KESEL, L 79 NC, , CNC - rack and pinion milling Make: KESEL Type: L 79 NC Built: 1986 Control: HEIDENAIN TNC 151 ** NEW IN 2007 ** Tischaufspannfläche: 2130 x 345 mm - X = 2110 mm - Y =: 215 mm Travel - Z = 325 mm milling head F 55: 18.5 kW milling head swivel + / - = 20 spindle: SK 50 *** magnetic chip conveyor 2 x hydraulic chucks 1 x guided Spann linear low-holder See Photos PDF file + VIDEO CLIP AD-ID: A469755 More Infos click here
Spindle drive, approx. 10 kW
Total electrical load, approx. 16 kW - 380 V – 50 Hz
Weight, approx. 4,500 kg
Accessories / Special Features
* HECKLER & KOCH CNC Control Model 783-H with display for 7 axes with dialog programming for various hobbing cycles for straight and helical gears, worm wheels and worms as well as crowning; and skiving, with and without shifting, with automatic centering in the existing gear.
* Shifting hob head with mandrels of various sizes.
* Built on coolant device with filter.
* Extra slide above work spindle for hydraulic drive in of steady rest, or for the monitor for centering.
* Workpiece holder in main spindle.
, AD-ID: A385634 More Infos click here
Gleason Revacycle RaeumautomatNr:725 , GLEASON USA, K725E, , Gleason
Revacyle clearing automat Nr:725 for straight tooth of bevel gears
with automatic loading installation year of construction: 1982 wheel
width: 21mm depth of teeth: 10.7 mm zahnfuss: 25.4 mm machine weight
approx.: 9.6 t AD-ID: A378942 More Infos click here
Spiral bevel gear cutting machine , OERLIKON, SKM 1, , Make Oerlikon SKM Type 1 - SPIRAC FIELD: gr Tellerrad in eienem medium-sized spiral angle of 30 320 mm module (normal module in mid-tooth width) 0.9 - 7.5's largest translation approximately 1 ratio: 9.5 largest dental width about 50 mm cone outer distance approximately 170 mm cone center until knife head axis 25 mm -150 mm cone center point to tool spindle shoulder 80 mm - 220 mm cone center Punk [...Technical data truncated] AD-ID: A407149 More Infos click here
max. wheel diameter 180 mm gear width 230 mm max. module 7 maximum axial offset 350/600 mm table diameter 180 mm table rotation speed 100/200 U/min dist. cutter spindle - workpiece spindle min. 30 mm dist. cutter spindle - workpiece spindle max. 300 mm swivelling of milling head +/- 45 Grad Taper od toolspindle HSK-A 63 tangential adjustment 200 mm max. milling cutter diameter 160 mm max. stroke of milling head 230 mm axial-feeds 20 mm/U radial feeds 4 mm/U tangential feed 5 mm/U milling spindle turning speed range: 120 - 1200 power capacity - milling spindle 14/16/23 kW total power requirement 45 kVA weight of the machine ca. 12 t dimensions of the machine ca. 3,7 x 2,8 x 2,7 m
Other information High productiv CNC Gear Hobbing machine Highlights:
- Liebherr CNC Control
- Hobbing speed 1200 rpm
- Cutter spindle drive capacity: 23 KW
- max. Module for steel: 7
- Ring loader with manually adjustable workpiece pockets , AD-ID: A461722 More Infos click here
PRAEWEMA, CNC Gear Tooth Deburring Machine, 1988 , PRAEWEMA, WA 400, P R A E W E M A (Germany)
CNC Gear Tooth Deburring Machine, continuous milling method
Model WA 400 Year 1988 Serial No. 06463x
_______________________________________________________
Workpiece Ø, max. 400 mm
Number of teeth 16 – 99
Module range, max. 6
Workpiece speed, max. (2.2 kW) 80 rpm
Workspindle slide 400 mm
Tool speed, max. 3,000 rpm
Tool holder SK 30
Total electrical load, approx. 26 kW - 380 V - 50 Hz
Weight, approx. 5,000 kg
Accessories / Special Features
* BWO (HECKLER & KOCH) CNC Control in 5 axes (plus another 2 axes for the loading device). Input via monitor. The control has all the supervision and fault diagnosis features necessary for fully automatic working process.
* Swivelling tool spindle holder, mounted on cross table, with …
* 2 workspindle units, which can be set at any angle. Suitable for cutting with different directions of rotation because the cutting units can be set at different angles. (Additional settings can be made on the lower spindle.) Reproducible settings are possible because all slides are equipped with scales, Vernier scales, and digital measuring systems with display; and are clamped mechanically. * Hydraulically operated workpiece clamping device. * Hydraulic tool clamping.
* Synchronization of workpiece and tool spindle via electronic drive.
* STROHTMANN Double Column Loading Device, with swivelling double gripper, and workpiece magazine with various workpiece holders, for fully automatic production.
* Coolant equipment. * Complete noise protection cabin. * Central lubrication.
* Separate hydraulic unit. * Safety grids, etc.
The machine is suitable for deburring and pointing of gear teeth by hobbing method (very suitable for series of automobile gear parts). The advantages of this system are the short working time, especially with a large number of teeth, and low noise levels.
Condition : Very good. Machine can soon be inspected under power.
Delivery : Ex stock, as inspected
Payment : Net, after conclusion of contract
Thank you for your interest. We always have a good selection of gear machines available – including a CRAMEN Double Spindle CNC Gear Deburring Machine, ZK 200, Year 1997.
, AD-ID: A376578 More Infos click here
Smoothing and testing equipment, MINI - TEC, MQ 250-6, , MINI - TEC type: MQ 250-6 year
of construction: 2002 Zahnradpruefmaschine very much good condition
full functionally AD-ID: A312240 More Infos click here
Producer TOS
Location Czech Republic
Max. milled wheel diameter 320 mm
Max. milled module Morse 7 Main motor output 7,5 kW
Platform size l x w x h 2460 x 2390 x 1820 mm
Weight 6200 kg
, AD-ID: A307551 More Infos click here
Grinding Machine, W M W - NILES, ZSTZ 06 / 08, W M W - N I L E S (Germany)
Programme Controlled Precision Gear Grinding Machine
Model ZSTZ 06 / 08 Year 1986 Serial No. 39-03-08
Gear Ø, min./max. 50 - 800 mm
Module range 2 - 14
Helix angle, max. 45 °
Max. gear width for straight gears 265 mm
Length of stroke, approx. 280 mm
Adjustment of stroke position 200 mm
Max. mounting length in counter bracket 700 mm
Max. weight of workpiece, approx. 800 kg
Min./max. no. of teeth 5 / 315
Grinding wheel diameter x width 350 x 32 mm
Grinding wheel speed, approx. 1,690 rpm
Total electrical load, approx. 25 kW - 380 V - 50 Hz
Weight, approx. 12 ton
Accessories / Special Features * Machine originally delivered by factory with increased workpiece dia. of 800 mm
* Machine can be used for single flank grinding of right or left
* ALLEN BRADLEY PC Control, Model PLC 2/20 with digital display and programmable memory. Automatic grinding process with various steps for roughing, finishing, and superfinishing. Automatic dressing cycle with pre-settable number of teeth.
* Profile correction possible by dressing, and additional movement of grinding slide (depth and width crowning).
* Hydrostatic guides for rotary table and bed slides.
* Approx. 50 change gears. * Helix angle display device.
* Large coolant device with band filter and
* Complete splash shields with sliding doors.
* Separate switch cabinet. * Separate hydraulic unit. * Oil cooling unit. * Oil mist exhaust. * Various other accessories.
Condition: Very good/nearly new. Machine can soon be inspected under power.
Delivery : Ex stock, as inspected.
Payment : Immediately after receipt of invoice.
, AD-ID: A249855 More Infos click here
CNC Automatic Precision Profile Gear Grinding Mach, PFAUTER-KAPP , PE 1503 G , CNC Automatic Precision Profile Gear Grinding Machine, suitable for the grinding of external spur and helical gears, pinions, splines and other workpieces of similar profile, up to 55" (1400 mm) pitch diameter.
This is a first class machine in superlative condition throughout, corresponding to the hereto attached copies of factory literature, featuring the following:
EQUIPMENT/FEATURES:
- Base machine with main grinding head carriage/column
- Work table group with large double-worm index drives for zero backlash, w/hydrostaic table bearing
- External grinding head capable of using both galvanized, grinding motor load display w/over-load signal
- Automatic grinding head swivel and clamping; CNC-controlled
within the work cycle, swivel angle input/resolution .001 degree
- Axial and radial feed drives w/independent servo motors and pre-loaded ball screws
- Automatic lubrication system:
* recirculating and shot lubrication of mechanical drive elements
* oil mist lubrication of grinding spindle bearings
* automatic shot lubrication of all guideways and other areas with every cycle of machine
* electrical monitoring of oil filter contamination
Equipment /Features continued: SIEMENS “System-3” CNC controller with CRT & profile grinding software
including software for fault diagnostics, (display in English),
* electronic handwheel for fine control of all CNC axes
* values in both inch and metric execution
* fully programmable work cycles and CNC M-function/features
for the following inputs, and cycles in various combinations:
- climb and conventional grinding
- axial grinding
- crown and/or taper grinding in both circular and/or linear interpolation
- end relief
- entry and exit feed control
- multi-cut cycle w/selection of infeed, feed rate and feed direction for each grinding pass, and table rotation CW or CCW
- size correction
- grinding spindle speeds
- number of teeth
- helix angle
* auxiliary displays (operating status) controlled grinding - Complete coolant plant with filter and refrigeration unit for thermally controlled grinding w/high volume coolant flow w/ two (2) centrifugal pumps with a flow rate of 200 l/min
(53/GPM) each and coolant tank with a capacity of 2500 l (660 gal) and grinding oil filtration with magnetic pre-separation and fine separation via paper band filter
- Oil cooling systems with cooling cycles for lubrication, grinding coolant, and grinding spindle motor drive
- Full machine work enclosure w/oil mist exhaust system/separator
- Full complement of electrics (motors/controls), with isolation transformer, (currently arranged for 480 volt, 60 cycles) 120 V AC control voltage, and CNC-controller, with two (2) heat exchangers for temperature regulation within control cabinet
- Set of machine levelling shoes
- Assorted grinding cutter mounts/arbors, wheel hubs
- Operator’s platform w/steps
- Full machine documentation, including operator's manuals for machine and controller, wiring and hydraulic diagrams, parts list
- Full machine work enclosure w/oil mist exhausts system/ separator
Siemans System 3 “CNC” controller with profile grinding software including software for fault diagnostics, (display in English)
PRINCIPLE SPECIFICATIONS: Maximum workpiece diameter (nominal) 55" (1400mm)
Maximum center distance wheel arbor
to work table centerline (approx.) 39.3" (1000mm)
Minimum center distance wheel arbor
to work table centerline 17.32" (440mm)
Maximum axial travel 23.6 (600mm)
Lowest spindle center position above table 18.39" (467mm)
Highest spindle center position above table 41" (1050mm)
Maximum grinding wheel drive/load 20 kW
Grinding wheel spindle rpm range 2000-6300 rpm
Grinding wheel arbor taper 3.1" (80mm)
Maximum grinding wheel diameter 9.4" (240mm)
Maximum grinding wheel width 1.968” (50mm)
Maximum grinding profile depth 1.968" (50mm)
Grinding head tangential shift (via CNC) +/- 50mm
Rapid traverse speeds: Axial 78.7” (2000 mm/min).
Rapid traverse speeds: Radial 78.7” (2000 mm/min).
Work table diameter 47.24" (1200mm)
Work table bore diameter 11.8" (300mm)
Work table bore depth 34.45” (875mm)
Work table feed range (per/min.) .04-80" (1-2000mm)
Maximum table speed for work alignment 6.25 rpm
Maximum work table load w/fixture 17,600 lbs (8,000 kGs)
Work table height from floor 37.4" (950mm)
Machine approximate net weight 20.500 kGs
Machine floor space (see drawing)
INSPECTION: The machine is ready for immediate inspection., AD-ID: A450255 More Infos click here
Gearshaper CNC, LORENZ, LS154 CNC, External gears, max. Æ 150 mm
Internal gears, max. Æ 280 mm
Gear width, max. 42 mm
Module range 0.5 - 5
Length of stroke 0 – 50 mm
Adjustment of stroke position 0 – 53 mm
Number of strokes 125 – 1,400 /min
Shaper spindle taper SK 40
Table size 250 mm
Table bore 100 mm
Distance between table and shaper head (less clamping cup) 300 mm
Total electrical load 25 kW - 380 V – 50 Hz
Weight 6,500 kg
Accessories / Special Features
* CNC control in 4 axes ( X/Z = linear, C+D = rotary). Interpolation. Input (no. of teeth/module) by operator. Modern and versatile control with lots of options.
* Machine is raised approx. 25 mm.
* Cross axis of upper column is adjustable.
* Automatic adjustment of stroke position (Z axis).
* Hydraulic workpiece counterbracket, in conjunction with loading device.
* Motor-driven workpiece centrifuge.
* Separate switch cabinet. * Separate hydraulic unit with oil cooler.
* Chip conveyor. * Fully covered working area. * Rotary workpiece loading device with built-on centrifuge. This can be dismantled if not needed without any problems.
* For an extra charge: FELSOMAT CNC Controlled Swivel-Arm Robot for loading and unloading the parts into and out of the rotary loading device.
, AD-ID: A284664 More Infos click here
SPECIFICATIONS:
Max. Gear Diameter 3600 mm
Min. Gear Diameter 690 mm
Max. Module (max 3000 mm Gear Dia) 30 MOD
Max. Module (3000-3600 mm Gear Dia) 25 MOD
Min. Number of Teeth 30
Max. Number of Teeth 540
Max. Distance between centerline of Cutter and Work 2000 mm
Radial Feed .13 to 2.8 mm/rev
Axial Feed .34 to 7.5 mm/rev
Max. Diameter and Length of Cutter 350 mm x 400 mm
RPM of Hob 5-60
Hob Swivel - 45
Max. Vertical Travel 1000 mm
Diameter of Table 1900 mm
Max. Workpiece Weight 25,000 kg
Capacity of Main Motor 15 Kw
Power Capacity in Total, 380V, 3 Phase - approx. 70 Kw
Space Required (L x W x H) 16,400 x 5,000 x 3,650
Weight of Machine, Approx. 52 Tons
Gear shaper Lorenz SJV 00 (20-20-001) , , , , 20 20 001 3 St. Lawrence Zahnradstossmaschine available SJV 00 External gears 180 mm Innverzahnung 140 mm including exchange wheels including Stossmessser Additional accessories on request! Further technical data on request! Errors and input errors. Price! AD-ID: A422909 More Infos click here
MAKE: MAAG Gear Shaper
MODEL: NBP 40 - 12.5m capacity Helix angle 45 deg
Description: Machine Weight: 110 tons
Maximum work load on table: 40 tons
Maximum Height: 1,300
Helix angle: 45 degree
Maximum No. Of teeth to be cut: 400 teeth
Minimum no. of teeth to be cut: 40 teeth
FURTHER PICS ON REQUEST
Specification: Max Dia to be cut: 12,500mm
Min Dia to be cut:
Tables available:
Bigger Table: 3,665mm
Smaller Table: 2,540mm
Max Module to be cut through generation process: 40 Mn
FURTHER DETAILS ON QUOTATION
YOM Early 1970's, but re conditioned by MAAG in 1995.
UNDER POWER
MACHINE ABOUT 2 HOURS FROM DELHI
Country: India
Availability: 4/11/2008
PRICE: $ 780.000 usd
, AD-ID: A433647 More Infos click here
Geargrinder, MAAG, HSS 90 S, Max. grinding diameter 900 mm
Min/max. number of tooth 12/200
Min/Max. Modul 2/20
Max. stroke 1690 mm
Feeds 30 - 600 mm/min.
Rapid feeds 6300 mm/min.
Max. workpieceweight 3000 kg
Wit a lot of tooling, very complete, AD-ID: A447696 More Infos click here
Spiral bevel gear cutting machine , OERLIKON, S 17, , Make Oerlikon Type S 17 FIELD: gr Tellerrad in eienem medium-sized spiral angle of 30 350 mm module (normal module in mid-tooth width) 1.5 - 8.5's largest translation ratio approximately 1:10 biggest tooth width about 60 mm outer cone distance about 190 mm Distance cone center knife point to head axis 25 - 170 mm cone center point to tool spindle shoulder 80 - 270 mm cone center piece to spin [...Technical data truncated] AD-ID: A407124 More Infos click here
Gear Honing Machine, GLEASON-HURTH, ZH 250 CNC-E, CNC Gear Honing Machine with SIEMENS SIN 840 C Control, Handling-system. Spheric Honing.
Two machines available.
More technical specifications see attached data-sheet , AD-ID: A405007 More Infos click here
Gear Honing Machine, GLEASON HURTH, ZH 250 CNC-E, workpiece diameter 250 mm
module 1,25 - 6,00
honing length max. 350 mm
control SIN 840 C
tooth width 60 mm
workpiece diameter 20 - 250 mm
a-axis +/- 20 °
y-axis +/- 80 mm
x-axis 0 - 160 mm
z-axis 60 - 870 mm
tool diameter - external 400 mm
tool diamter - internal min. / max. 210 - 365 mm
toolpiece turning speed range 0 - 1000 U/min
workpiece turning speeds 0 - 4000 U/min
total power requirement 25,00 kW
weight of the machine ca. 6,60 t
dimensions of the machine ca. 6,50 x 6,30 x H2,70m
Spheric Honing
- Coolant Cleaning system
- Loading- and Working area
- very few cutting hours, AD-ID: A456544 More Infos click here
Bevel gear generator, STANKOIMPORT, 5A250, Weight: 8000 kg Lenght x width x height: 2980x2400x1600 mm
Max. diameter: 500 mm
Max. length of cone line: 250 mm
Max. diameter of the wheel at speed ratio:
10:1 .... 500 mm 2:1 ..... 440 mm 1:1 ..... 350 mm, AD-ID: A437092 More Infos click here
spline shaft milling machine, HECKERT, ZFWVG 250 x 3150, max. workpiece-dia. over bed 500 mm max. workpiece-dia.
over support 250 mm
max. workpiece-length 3150 mm
weight appr. 5100 mm
machine with change gears and
2 milling heads , AD-ID: A468033 More Infos click here
Gleason Revacycle clearing automat , Gleason, Typ K725E, , Gleason Revacyle
Raeumautomat NR. 725 for straight tooth bevel gears with automatic
loading installation year of construction: 1988 wheel width: 21mm
depth of teeth: 10.7 mm zahnfuss: 25.4 mm machine weight approx.: 9.6
t AD-ID: A387993 More Infos click here
CNC Gear Grinding Machine , KAPP, VAS 531 CNC, Technical details control CNC Optronic AG D 150 B, Siemens SPS S5 115 U
max. wheel diameter 200/ 320/ 500 mm max. module 16 min. module 1 max.helical angle 90° deg spindle turning speed range 2000 - 10000 U/min weight of the machine ca. 5 t , AD-ID: A339257 More Infos click here
CNC hard pre-turn(peeling)m/c for outer processing, GLEASON- PFAUTER, PF 200, max. wheel diameter 220 mm
max. module 3 mm
stroke 400 mm
swivelable +/- 45 deg
slide cross (x-axis) 185 mm
slide cross (z-axis) 250 mm
total power requirement 48 kW
weight of the machine approx. 10 ton, AD-ID: A338907 More Infos click here
Gear Shaving Machine, HURTH, ZS 350, Two machines available.
More technical specifications see attached data-sheet , AD-ID: A405023 More Infos click here
Gear Grinder, REISHAUER , NZA 300 , Max. wheel diameter: 300 mm
Gear width: 170 mm
Max. module: 5, Min.Module: 0,5
Clamping length max.: 420 mm,
Max. angle of teeth: 45 grad
Min. number of teeth: 12
Max. number of teeth: 130
, AD-ID: A390766 More Infos click here
Gear honing machine , Faessler, D250C, , gear honing machine manufacturer: Faessler
D250C type: D250C year of construction: 1992 control: NUM 760T
Gesamtanschlussleistung: 23 KW weight: 2500 kg of mass per unit volume
(LxBxH): 3460 x 2100 x 2010 mm AD-ID: A428811 More Infos click here
CNC high-Wälzfräsmaschine , Liebherr, LC 1002, , 14 mm module, gear diameter max. 1000 mm in front-wheel max. 800 mm, milling spindle: ISO 50, is particularly suitable for: Straight - and Schrägverzahnungen, snails wheels AD-ID: A467657 More Infos click here
433 TOS FO-16-20 two pieces , 433 TOS FO-16-20 two pieces , 433 TOS FO-16-20 two pieces , TOS FO-16-20 two pieces for 138.500euro
Gear hobber TOS FO-16 in amazing state 1970 г.в Rear stable in store
faceplate 1350 mm,max the diameter of treated wheel =2000 mm without
rear stable, modulus 20mm.
Max the thickness of обр wheel 560мм. The complete set, worker, condition good.
Little was exploited (in repair shop), set of gearwheel and accommodations.
To see and to retract in central region
Gear hobber TOS FO-16 in excellent state despite 1957 г.в
modulus 20 diameter 2000 rear stable no changes gearwheel - the presence 80 per cent
directing the mirror of deterioration 10 per cent to See and to retract in central region
Pfauter R-S 16 (20-14-004) , , , , 20-14-004 Zahnradabwälzfräsmaschine - vertical Pfauter RS 16 Maximum diameter: about 80 mm Maximum module: 1.0 Maximum length: about 65 mm including exchange wheels! diversem including accessories! Further technical data on request! Errors and input errors! Maas Chine is our stock and can be viewed zuvoriger appointment! Available Immediately! AD-ID: A341671 More Infos click here
4 pieces of Maag HSS 60 BC (20-19-001) , , , , 20-19-001 4 piece of gear grinding Maag HSS 60 BC Maximum diameter: about 600 mm Maximum module: 2.0 - 12 Maximum length: about 240 mm 45 Diversem degree helical including accessories! Further technical data on request! Available Immediately! Errors and input errors! Maas Chine is our stock and can be viewed zuvoriger appointment! AD-ID: A341672 More Infos click here
HEAVY DUTY GEAR, MUIR, HOBBING MACHINE, USED MUIR (UK) HEAVY DUTY GEAR
HOBBING MACHINE.
TABLE DIAMETER: 10’(3000mm)
ORIGINAL MAXIMUM GEAR DIAMETER: 12’(3600mm)
PRESENT MAXIMUM DIAMETER GEAR DUE TO
MODIFICATION OF BEDWAY: 26’(7800mm)
MAXIMUM POSSIBLE GEAR DIAMETER: 30’(9000mm)
MINIMUM GEAR DIAMETER: 3’(90mm)
MAXIMUM GEAR FACE WIDTH: 8’(2400mm)
MAXIMUM TOOTH PITCH HOBBED: 1DP (M25.4)
APPROXIMATE WEIGHT OF MACHINE: 50-60 TONS
ARBORS: 6 PCS
HOB CUTTERS (MOSTLY UNUSED): 72 PCS
Gear Grinding Machine , TOS, OBP 32, Max. diameter of wheel(workpiece): 320 mm Max. module: 5 Specification Max. diameter of wheel(workpiece): 300 mm Max. width of wheel (workpiece): 170 mm Max. number of teeth: 130 Min. number of teeth: 12 Max. module: 5 Min. Module: 0,5 Max. pressure angle: 30° Min. pressure angle: 14°30' Grinding tool speed: 1900 rpm Max. diameter of grinding wheel: 350 mm Grinding wheel width: 62, 84 mm Max. weight of workpiece: 40 kg (incl. clamp) Slide stroke: 180 mm Grinding spindle motor: 4 kW Total machine el. input: 10 kVa Weight: 4550 kg , AD-ID: A391131 More Infos click here
Spiral bevel gear cutting machine , OERLIKON, S 17, , Make Oerlikon Type S 17 FIELD: gr Tellerrad in eienem medium-sized spiral angle of 30 350 mm module (normal module in mid-tooth width) 1.5 - 8.5's largest translation ratio approximately 1:10 biggest tooth width about 60 mm outer cone distance approximately 190 mm cone center until knife head axis 25 - 170 mm cone center point to tool spindle shoulder 80 - 270 mm cone center to the piece [...Technical data truncated] AD-ID: A407127 More Infos click here
Gear hobbing machine , PFAUTER, PA 180 , Max. milled wheel diameter 180 mm
Max. gear width 200 mm Max. milled module 6 mm
Clamping table diameter 240 mm
Platform size l x w x h 2525 x 1375 x 2805 mm Weight 6500 kg
, AD-ID: A351176 More Infos click here
Gear shaper, Lorenz, SN 4, Max. wheel diameter 180 mm Max. milled module 4 mm
Min. milled module 0,5 mm
Table 160 mm Platform size l x w x h 1200 x 1100 x 2100 mm
Weight 3000 kg The machine is in a very good condition. , AD-ID: A351087 More Infos click here
CNC Gear Honing Machine HURTH ZH 250, Hurth, ZH 250, Articles Nr. 487
CNC gear honing machine
CNC of Siemens Sinumerik 840C
Manufacturer: HURTH
Model: ZH 250 Year of manufacture: 1996
Additional information
Workpiece diameter min./max. 20 - 250 mm
Module 1.0 mm - 6.0, wave workpiece length 350 mm
Gearing-Wide max.100 mm
Workpiece rotation speed of max. 6000 1/min
Honing-ring outer diameter 400 mm
100 mm honing-ring width
Adjusting-ways: X-Achse (horizontal) 60 mm
Y axis (vertical) 160 mm
Z-axis (horizontal) 800 mm
A axis 20 le/ri. Degree
Fast drive X-axis (Tool delivery) of 2 m/min
Y axis (Tool delivery) of 2 m/min
Z-axis (Workpiece movement) of 24 m/min
A axis 12 degrees
Main drive 8.5 kilowatt
30 kVA connected load
5500 kg weight
Machine setting face BxT 2850-2150 mm, AD-ID: A365477 More Infos click here
Gear Grinding Machine , TOS, OBP 32, Max. diameter of wheel(workpiece): 320 mm Max. module: 5 Specification Max. diameter of wheel(workpiece): 300 mm Max. width of wheel (workpiece): 170 mm Max. number of teeth: 130 Min. number of teeth: 12 Max. module: 5 Min. Module: 0,5 Max. pressure angle: 30° Min. pressure angle: 14°30' Grinding tool speed: 1900 rpm Max. diameter of grinding wheel: 350 mm Grinding wheel width: 62, 84 mm Max. weight of workpiece: 40 kg (incl. clamp) Slide stroke: 180 mm Grinding spindle motor: 4 kW Total machine el. input: 10 kVa Weight: 4550 kg , AD-ID: A391130 More Infos click here
gear wheels hone , Nagel, 2 VS 5 – 30 T / 2 SPV, , gear wheels honing machine manufacturer: Nail
type 2 VS 5 30 T/2 SPV workpiece of gear wheels material: 16 MnCr 5;
20 MnCr 5 hardness firmness: recompensed, min HRA 78
Honbearbeitungsdurchmesser: 19 mm; 20 mm of
Finishbearbeitungsdurchmesser (i; A): 20 30; 74,5/ 79; 19/ 28; 19/ 30
Bearbeitungslaenge (high): 23 mm 15 mm 43 mm of Werkstueckaufnahme:
swimming clamping device accuracy of the vorbearbeitung
-Vorbearbeitung: fine-turned and hardened diameters: 0.01 mm of
Rundheit: 0.015 mm of roughness: Computer centre 10 15 m stock
allowance: 0,1 0.12 mm in; 0,1 0.15 mm for each piston area tool
cooling agent: Hone oil -Werkzeugaufnahme: led tools (hone) Honspindel
number of the hone spindles finish spindles: 2 2 stroke length hone
400 mm 100 mm of speed of lift to finishen:10: to 20 m min steplessly
adjustably Werkzeuganschluss:50 mm -Spindeldrehung hone finishen: 160,800 u min 0 1000 u min
steplessly adjustably Hubantriebsleistung: 5.5 KW of 2 x 0.75 KW = 1.5
KW of Spindeldrehantriebsleistung: 2 x 2.2 = 4.4 KW of 2 x 0.75 KW =
1.5 KW of measuring instrument Nachmessstation with feedback price
increase hydraulic equipment Hydrauliktank: 630 l electrical equipment
operating voltage: 400 V, 50 cycles per second with neutral conductor
control voltage: DC 24 V entirely connected load: KW of execution:
according to VDE 0113 control: Siemens control Sinumerik 840 D NAIL
MS-U3 -Maschinenleistung: 100 workpieces h with 100 % extent of
utilization Rundheit: 0.004 mm of Bohrungstoleranz: 19& 1463;0,059&
1471;0,072/ 20& 1463;0,059& 1471;0,072 surface: Computer centre 5 m
hone finish time: 32 seconds. Idle period: 4 seconds. Cycle time: 36
seconds AD-ID: A428815 More Infos click here
MSO thread and worm grinding machine , MSO, MSO GA - 2 , , thread grinding machine
MSO GA - 2/250 sharpening range: approx.. 1 - 250 mm of point top
speed: approx.. 250 mm maximum upward gradient: 72 mm maximum module:
Module 12 AD-ID: A432069 More Infos click here
CNC Gear Tooth Chamfering MachinePRAEWEMA SYNCHRO, PRAEWEMA, W 2 - 1 SYNCHROFORM, P R A E W E M A (Germany)
CNC Gear Tooth Chamfering Machine. Machine can be used for generating external and internal teeth on sliding sleeves, sliding gears, synchronous rings, coupling bodies, starter pinions, spur gears, etc. Continuous (hypocycloidal) milling process.
Model SYNCHROFORM W2 - 1 Year 1991 Serial No. 05610
_______________________________________________________
Workpiece Ø, min./max. 30 - 400 mm
Number of teeth 6 – 150
Module range, max. 5 Tool holder shaft Ø SK 30 / 20
Tool speeds 4,000 rpm
Spindle drive max. infinitely variable 1.8 kW
Feeds, longitudinal and cross 0.001 – 12 m/min
Workpiece speed, max. (1.5 kW) C Axis 2,000 rpm
Workspindle slide 400 mm
Tool speed, max. 3,000 rpm
Tool holder SK 30
Total electrical load, approx. 16 kW - 380 V - 50 Hz
Weight, approx. 10,000 kg
Accessories / Special Features
* BWO (HECKLER & KOCH) CNC Control model 785 H for altogether 7 axes. Input via monitor. The control has all the supervision and fault diagnosis features necessary for fully automatic working process.
* 2 workspindle units, left and right, which can be set at any angle. * CNC controlled: Z and W Axes for tool cross slide. X and U Axes for tool longitudinal slide.
* L and O Axes for milling spindle. C Axis for workspindle rotation.
* Manually controlled: Tool slide rotary table (B and E Axes). Tool slide vertical infeed (V and Y Axes). Tilt of tool head (A and D Axes). All axes have digital display in the control.
* Hydraulically operated workpiece clamping device in conjunction with an automatic loading device using workpiece feed / conveyor belt and swivelling loading device, as well workpiece control by air.
* Coolant equipment with chip conveyor. * Noise protection cabin. * Central lubrication.
* Built-on hydraulic unit. * Pneumatically driven safety doors. * Deburring device, etc.
The machine uses the hypocycloidal milling principal, with electronically synchronized tool and workpiece axes for working straight roof-formed teeth, symmetric as well as asymmetric forms. Advantages are high precision and productivity.
Condition : Good to very good. Machine can soon be inspected under power.
Delivery : Ex stock, as inspected
Payment : Net, after conclusion of contract
Thank you for your interest. We always have a good selection of gear machines available on stock.
, AD-ID: A376550 More Infos click here
Gear shaper , TOS, OHA50A, , Teeth diameter 500mm Stosshoehe 120 mm module 8/10 Steurung brought with Lenze 4 quadrant automatic controllers on an optimal control condition table dismantled over-sharpened. Fuehrugen again adjusted. Machine has optimal impact quality AD-ID: A376308 More Infos click here
HURTH zahnradetgradmaschine ZEA - M2+2 , HURTH, Hurth ZEA - M2+2, , rolling burr
automat year of construction. 1982 work space: Station 1 to 2,610 mm
distance rolling burr wheel center machine center min max 0 150 mm of
angles of traverse of the swivel arms max was away. 22,5 distance
headstock front - machine center min max. 150/2.75 mm distance
headstock top speed: Machine center min 9 mm stroke of the headstock
guides of max 70 mm tool: Outside diameter min max 20 /120 mm
lengthens max 350 mm teeth width of max 30 mm module min /max 1/4 mm AD-ID: A380456 More Infos click here
Gear Hobbing machine, TOS, FO 6, max. wheel diameter 800 mm gear width 280 mm max. module 8 min. module 1 wheel diameter with counterstay 600 mm clamping table diameter 420 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m , AD-ID: A437696 More Infos click here
gear hobbing machine, PFAUTER, P 630, max. gear -dia. 630 mm
max. module 10
table-dia. 550 mm
weight of machine appr. 7,6 t
machine with change gears, AD-ID: A415991 More Infos click here
96 HWD GOULD & EBERHARDT UNIVERSAL GEAR HOBBER New in : 1980 Maximum rated diametral pitch …………………………… 1DP Heavy-duty Worm Driven Head Max. diameter of work……………………………………………125” Hole thru head stock for pinion work………………………25” Maximum face capacity spur/helical……………………….42”/36” Maximum diameter without support………………………98” Maximum diameter with support …………………………..64” Max. centers between work and hob arbors……………55.5” Min. centers between work and hob arbors…………….5” Minimum diameter capacity (3.75 hob)………………….13” Maximum hob diameter…………………………………………12” Diameter of index worm gears………………………………..72” Diameter of work table…………………………………………..78” Maximum table load work and fixture…………………….30 Tons Index range (single thread hob) Including primes……………………………………………………25-100 Excluding primes……………………………………………………100-1200 Hob speed range……………………………………………………..6-100 RPM Feed range…………………………………………………………… .003”-.200” Overall length of machine (approx.)…………………………26’ Overall width of machine…………………………………………9’ Machine net weight (approx.)…………………………………..65,000 lbs. EQUIPMENT/FEATURES: Counter weight Differential mechanism Automatic infeed Single index Dualcad worm gearing Two worm gears for table drive Lubrication and coolant systems Full set of change gears, ball screws Assorted hob arbors, work arbors and fixtures PRICE : $479,000
WMW MODUL Shaping machine, WMW-Modul, ZSTWK 280x8, Shaping machine for cone
Manufacturer: WMW-Modul
Max. Module: 8
Max. Dia: 400 mm
Machine is in good working condition with change gears and lot of toolings. Machine just needs to be cleaned up., AD-ID: A469973 More Infos click here
CNC gear hobbing machine, , KB3120 200xM6, , 3-Achsen CNC - Gear-cutting machine control Siemens 802D steered axles X-Z-and Shifting axle. Workpiece diameter max.200 Modul.6 number of teeth and drill number of revolutions by change gears. Drill number of revolutions of 77-488/9-Stufen table revolutions max.32 Spaenerfoerderer and hydraulic tensioning arrangement. Total weight 4500 kg. Delivery time ca.8-12 months copyright 2008 Stelter CNC service AD-ID: A417115 More Infos click here
Gear cutting machine , MAAG , MAAG SH 100, Gear cutting machine MAAG SH 100
Type SH 100
Modul max 15
Modul min 2
Max diameter of wheel 1000 mm
Min. diameter of wheel 80 mm
Width of teeth 300 mm
Min. number of teeth 15
Max. number of teeth 350
Max. loading weight 2000 k
Year of production 1967
, AD-ID: A446783 More Infos click here
Metzger Worm and Thread Hobbing Machine, Metzger, MS 12 , , 2 machines: Butcher
schneckenfraesmaschinen type ms of 12 max. Werkstueckdurchm. 260 mm of
max. Module of 12 max. Module on 1 average 8 max. length in a course,
which can be milled, 520 mm of max. Friction length 730 mm threads
which can be milled: min./max. Aussendurchm. 20/260 mm of min./max.
Upward gradient 6/350 mm of min./max. Fraeserdurchm. 120/160 mm -
Bhrg. 40 mm - max. width of 35 only drills with 10 profile inclination
use (1/4 "right) AD-ID: A426013 More Infos click here
GEAR HOBBER 546M, PRODUCED BY KOLOMNA, GEAR HOBBER 546M, PRODUCED BY KOLOMNA, GEAR HOBBER 546M, PRODUCED BY KOLOMNA, GEAR HOBBER 546M, PRODUCED BY KOLOMNA
The work piece dia. – 2250-5000mm
Max. module – 16
The number of the cogs cut – 120-800
The max. cutter’s dia. – 320mm
The table dia. – 3800mm
The distance between the table and the axis of the cutter – 550-950 mm
The distance between the axis of the table and the axis of the cutter – 1150-2700mm
RPM of the cutter – 5,6-46
The number of the speeds of the cutter – 10
The number of feeds – 16
The power of the main drive – 14kv
The max. load on table – 40 tons
The overall dimensions of the machine – 8510x4390x3100mm
The machine weight - 75 050 kg.
Gear honing machine Gleason HURTH ZH 250 CNC e , GLEASON-HURTH, ZH 250 CNC-E, , CNC gear
honing machine with SIEMENS control. And discharge equipment. Spheric
Honing. Workpiece diameter 250 mm module 1.50 - 6.00 hone length max.
350 mm of width of tooth face 60 mm of workpiece diameters 20 - 250 mm
of A-axle +/- 20 y axis +/- 80 mm of x axis 0 - 160 mm of Z-axis 50 -
870 mm of tool outside diameters 400 mm tool inside diameters of 210 -
365 mm of tool numbers of revolutions 0 - 1000 U/min workpiece numbers
of revolutions 0 - 4000 U/min total output need 25.00 KW machine
weight approx.. 6.60 t space requirement approx.. 6.50 x 6.30 x
H2,70m AD-ID: A432747 More Infos click here
96 HWD GOULD & EBERHARDT UNIVERSAL GEAR HOBBER New in : 1980 Maximum rated diametral pitch …………………………… 1DP Heavy-duty Worm Driven Head Max. diameter of work……………………………………………125” Hole thru head stock for pinion work………………………25” Maximum face capacity spur/helical……………………….42”/36” Maximum diameter without support………………………98” Maximum diameter with support …………………………..64” Max. centers between work and hob arbors……………55.5” Min. centers between work and hob arbors…………….5” Minimum diameter capacity (3.75 hob)………………….13” Maximum hob diameter…………………………………………12” Diameter of index worm gears………………………………..72” Diameter of work table…………………………………………..78” Maximum table load work and fixture…………………….30 Tons Index range (single thread hob) Including primes……………………………………………………25-100 Excluding primes……………………………………………………100-1200 Hob speed range……………………………………………………..6-100 RPM Feed range…………………………………………………………… .003”-.200” Overall length of machine (approx.)…………………………26’ Overall width of machine…………………………………………9’ Machine net weight (approx.)…………………………………..65,000 lbs. EQUIPMENT/FEATURES: Counter weight Differential mechanism Automatic infeed Single index Dualcad worm gearing Two worm gears for table drive Lubrication and coolant systems Full set of change gears, ball screws Assorted hob arbors, work arbors and fixtures PRICE : $479,000 , AD-ID: A436025 More Infos click here
436 Gear hobbing machine MODUL ZFWZ 3150x30I, 436 Gear hobbing machine MODUL ZFWZ 3150x30I, 436 Gear hobbing machine MODUL ZFWZ 3150x30I, Gear hobbing machine MODUL ZFWZ 3150x30I, YOP 1968
Country of Origin: Germany
Manufacturer: Veb Modul
Machine is complete with 4 change gear boxes, tail stock and 4 replaceable heads.
It is in good working condition. More specification and photos we will send on request.
Specification:
Max. diameter without the holder: 3150 mm
Max. diameter with the holder: 1600 mm
Min. diameter: 500 mm
Min. width of a tooth: 1000 mm module 30
Max. corner of an inclination of a tooth: 45 degree
Max. rearranging of a tangential pusher: 500 mm
Max. diameter: 350 mm
Max. length: 440 mm
Electrical specifications: 380 V, 220V, 50 Hz, 3 MP
Main motor: 70 kW
Dimension: 6785x5400x4820 mm
Weight: 65 ton
Price 475.000 Euro Fca Vilnius
, AD-ID: A448913 More Infos click here
Gear Grinding Machine , REISHAUER, RZ 362 A, max. wheel diameter 360 mm gear width 175 mm max. module 7 min. module 0,1 root circle diameter 10 mm slide stroke 175 mm max.helical angle +/- 45° ° max. number of teeth 600 min. number of teeth 6 workpiece weight max. 60 kg grinding wheel size B:104 ;Dm min/max280-350 mm grinding spindle turning speeds at profiling 50 - 95 U/min spindle speeds (infinitely variable) beim Schleifen 1100-2300 U/min feed: pro Wkstückumdreh. 0-3,4 mm infeed speed of wheel carriage max. 99,9 mm/min total power requirement kW weight of the machine ca. 6,6 t dimensions of the machine ca. 6,0 x 6,0 x 2,3 m , AD-ID: A459016 More Infos click here
Manufactured in Russia
Maximum work piece diameter, mm 800 Maximum module 10 Dimensions of the machine, mm 2650 x 1450 x 2000 Weight of the machine, kg 7200
The machine-tool is in excellent and working condition. It is in full set, also change gears are included.
The hobber is located in Latvia.
Pictures on request.
