Air forging hammer , Kuhn, K12 / 42, , HR-REF-2012 Maschinenart: Air forging hammer Manufacturer: Kuhn Type: K12 / 42 Built: 1987 ca.Gewicht: 700 kg (without foundation) Mass approximately: 920 x 640 x 1,240 mm Specifications: - Bear Weight 38 kg - 200 mm height - Stroke 1/min number 225 - 3 kW engine power - Working Assets 850 Nm / percussion accessories: - concrete foundation (to ca.4) - coverage - a framework - damper Condition: - cultivated overall state - placed in service [...Technical data truncated] AD-ID: A413621 More Infos click here
Counter Blow Hammer , DIGEP, EK 32 A, impact capacity 32 t stroke 1500 mm weight of the machine approx. 153500 kg dimension of the machine l x w x h 4,75 x 3,10 x 7,75 m
Further Details:
workpiece weight 40 - 240 kg, strokes 6-12/min, min./max. dies length 1100/2400 mm
Air hammer , HEBÖ, LH 42, , on concrete socle a Vulkolanmatte prevented that
the hammer by Vibrtation the concrete socle grinds 2 dies of kind of
condition - taper pins - dies for staff 2011 and 2012 TECHNICAL DATA:
Save-yielded 42 kg bear stroke 196 mm of number punch 200 mm of engine
performance 4 KW, 380 V, 50 cycles per second of length 1150 mm broad
850 mm height inclusively. Base 1600 mm anvil weight 280 kg total
weight 900 kg foot pedal AD-ID: A328935 More Infos click here
326 Hot Forging press 2500 tn,VORONEZH , 326 Hot Forging press 2500 tn,VORONEZH , 326 Hot Forging press 2500 tn,VORONEZH , Hot Forging press 2500 tn,VORONEZH K8544, 1976YOM.
2500 tons,ram stroke 350 mm, no of ram strokes/min 70, shut height 890 mm, bolster plat to ram adjustment stroke 10 mm, bed dimensions 1200 x 1400 mm, ram dimensions 1070 x 1120 mm,Upper ejector: ejector capacity 6.3 tons, stroke 50 mm, under ejector: ejector capacity 1.0 tons, stroke 50 mm, windows in upright 1000 x 720 mm, main drive motor power 120 KW, dimensions of press 5585 x 3750 x 6830 mm, weight 183,5 tons
Counter Blow Hammer, DIGEP, DHEK 40 A, impact capacity 40 t stroke 1500 - 1800 mm total power requirement 310 kW weight of the machine approx. 290000 kg dimension of the machine l x w x h 5,0 x 3,3 x 9,3 m
Further details:
max. forging die length 1300-2800 mm speed 8 - 10 strokes/min, workpiece weight 100 - 400 kg, height over floor 6630 mm
Forging hammer , Beche, ´Beche 65, , Very well-preserved Beche forging hammer 65 Bear fine setting and Steuerungusw. immediately usable without restriction. AD-ID: A467059 More Infos click here
small forging hammer, Parx, 45 NBF, , small, electrically propelled forging hammer,
total weight approx. 800kg, operationally. Further information on
request. AD-ID: A273445 More Infos click here
Scissors , Peddinghaus, Hand-Stahlschere, , almost a classic car! Steel scissors for manual operation to sell, built in 1960s, with iron wheels, functional, AD-ID: A457987 More Infos click here
Forging anvil used , , 180-200kg, , anvil with rundhorn uses various pliers of
hammers and dies on chunk further in the offer forging fire with
blower and exhaust, Gaschmiedefeuer with 2 burners newly, AD-ID: A426717 More Infos click here
964 Lake Erie 3500 Ton Hot & Cold Extru, 964 Lake Erie 3500 Ton Hot & Cold Extru, 964 Lake Erie 3500 Ton Hot & Cold Extru, Lake Erie 3500 Ton Hot & Cold Extrusion Piercing Press
Main Ram: 40"
Jack Cylinder Diameter: 2 - 9.75"
Max Stroke: 108"
Working Pressure: 5,000 psi
Main Motor: 150 HP
Number of motors: 10
Main hydraulic pump type: Denison piston/Oil Gear
Hydraulic pump: 35 GPM
Number of Hydraulic pumps: 18 - Denison, 2- Oil Gear
Press weight: 600 tons
Oil capacity: 4335 gallons
Press cycle time: smallest slug: 10 seconds / largest slug; 25 seconds.
Largest slug diameter: 9.8 inches diameter
Longest slug length: 12 .35 inches long
Longest cup length: 55.5 inches
Aluminum alloys cold extruded: 6061 and 7032
Main switch gear: Allen Bradley/WEG,
Complete With:
Main controls: Allen Bradley 505 PLC
All programming functions through P.C
Changed from ram positioning switches to linear transducer
Additional Main Ram and Jack cylinder maintained as critical spare parts.
Maximum daylight: 110 inches (could go to 120 inches with tooling modify)
Approximate Dimensions: 552"(LR) X 276"(FB) X 204"(H)
Year Mfg. 1957 Stock #067136
Price $522,000.00 , AD-ID: A433472 More Infos click here
Air hammer forging hammer , Bernsdorfer, , , air hammer, 200Schlaege/min, bear
mass 70Kg, inclusive various accessories. AD-ID: A432609 More Infos click here
338 Hot Forging press 8000T, 338 Hot Forging press 8000T, 338 Hot Forging press 8000T, Hot Forging press 8000T
Price 5.000 .000 Euro FCA ITALIA PORT
* 8000 tons
* slide stroke 480 mm
* distance between table and bolster plate of the slide in its extreme bottom position 1590 mm
*speed in continuous mode: 40 strokes /min
*speed in single stroke mode 12 strokes /min
* slide dimensions 1900 x 2350 mm
* table dimensions; from left to right 2100 and from front to back 2300 mm
* electric motor of main drive : power 400 kW , voltage 380V (50Hz, but if 60Hz is required it is possible to discuss) * press overall dimensions 8200 x 6200 x 9800 mm , *weight 700 tons
1) The name of the manufacturer is TMP Voronezh,( Russia)
2) It’s Mechanikal system
1) All documents , drawing, for 8000Tons press are available and in English (I joined with the technical specification a list og vendors for electrical, hydraulic and pneumatic equipment, and buyer can select manufacture from the list of their choice, all documents in English will be provided).
2) Press is brand new and full control cabinet is supplied with the press
3) The press is brand new, so after manufacturing and testing, the press was dismantled / packed is at Italian Port (sorry no photos before dismantling)
4) The press is produced in 2007, Brand New Press
5) The press is complete at port, and all Electricals / Hydraulics / Pneumatics of European Make my partner will ship separately after selection of make finalized
6) The press is brand new, complete and no parts are missing or to be repaired
7) The press is guarantee by my partner
I hope that these responses correspond to your expectations
new in 1975
for automatic cold forge of calibrated pipes
Number of forging hammers:4
Stroke per minute:580
Hammer length:180mm
Diameter adjustment:60mm
Max. forging diameter with mandrel:75mm
Max. work piece length with side extraction:3000mm
Min. work piece length:400mm
Anchor pad step less speed:0-15 mm/sec
Counter support stroke:3150mm
Counter support force:60 Mp
Cold water flow rate:25 m3/hour
, AD-ID: A470064 More Infos click here
314 Hot Forging Crankshaft Press K04.019.840-00-00, 314 Hot Forging Crankshaft Press K04.019.840-00-00, 314 Hot Forging Crankshaft Press K04.019.840-00-00, Hot Forging Crankshaft Press K04.019.840-00-001 (analogue of KB8040), YOP 1984
Country of origin: Russia
Manufacturer: Voronezh
The price - 135.000 EUR CIF any port.
The press is in very good condition.
Specification:
Tonnage: 1000 tons
Slide stroke: 250 mm Frequency of slide strokes: 90/1 min
Distance between table and punch plate of slider in case of upper table location: 560 mm
Adjustemnt of distance between table and slider: 20 mm
Upper ejector:
-stroke: 40 mm
-power: 31,5 kN
Bottom ejector:
-stroke: 40 mm
-power: 50 kN
Bed dimensions: 770x990 mm
Slide dimensions: 720x720 mm
Window size in the column: 560x560 mm
Lower extractor: 5
Upper extractor: 3,15
Overall dimensions: 4350x3500x5145 mm Total weight: 65150 kg
, AD-ID: A433442 More Infos click here
Make: SMERAL
Type: LHK 800
Country of Origin: Czech Republic
Year of Make: 1985
Dimensions of Machine (length x width x height): 5.35 x 3.6 x 3.06m
Weight of Machine: approx. 84 t
Pressure limit of upsetting ram at the end of stroke: 8.000 kN
Max. diameter of bar stock – soft steel: 100 mm (4”) number of strokes per min. upsetting ram: 35/min stroke of upsetting ram: 380 mm Grip: 159 mm
Ram dimensions (length, width of one half, height): 510, 200, 680 mm Electro motor output: 40 kW
Air forging hammer Beche , Luftschmiedehammer Beche, , , air forging hammer Beche, 85 kg
save-yielded, engine performance 9.2 KW, with starter, surface area
700 x 2000 mm, height of 2000 mm, plunger machine, technical good
condition, inclusive. 2 saddle sets. The air forging hammer costs
5,500 plus VAT. AD-ID: A431563 More Infos click here
321 Horizontal hammering machine SDH-25.601/801 B, 321 Horizontal hammering machine SDH-25.601/801 B, 321 Horizontal hammering machine SDH-25.601/801 B, Horizontal hammering machine for longitudinal hammering of type SDH-25.601/801 B
is four swaging machine that is equiped by manual and semi-automatic control. The machine in this development is special available for pipe hammering on triblet in cold.
Materials available for processing: All forging materials as alloyd structural steels and high alloyd special steels, as well as special alloy outgoing from roughing or drawn tubes.
Technical parametres:
Number of swage 4
Forging pressure on swage 350 tons Number of swage strokes 580/min Swage lenght 270 mm
Min. diameter of forging pipe 60 mm Max. diameter of forging pipe 205 mm Max. lenght of pipe 8000 mm Electric motor rating 360 kw Machine power 70 metres/hour
It complete workplace including conveyers, dividing of materials and final grease removal.
It has also complete equipment in formo f triblets and swages for variol diameters. Machine is under power with the possibility to try it.
Price: EUR 988.000,-
If you are interested in these offer do not hesitate to contact us, and we will send you technical parametres and photos.
, AD-ID: A448904 More Infos click here
