Hydraulic lift / Compact lift 43T , Heidkamp, , , Small, handy and robust activity Swing lever The pivoting lever controls can also lift the narrow space under optimal conditions operated. allows sensitive, millimetergenaüs work. AD-ID: A449094 More Infos click here
Vice, Hoehenverstellbar, Leinen, Backenbreite 125 mm, , durable mark
vice in the height adjustably thickness of jaw 125 mm AD-ID: A272572 More Infos click here
Hydraulic rate of assessment, Nike, mit mehreren Zylindern, , consisting of: - Hand pump flat cylinder Druckraft of 20 ton-normally cylinders thrust force 20 tound several tools AD-ID: A325030 More Infos click here
Knuckle-joint press, Berg & Schmid, PNK1700, , Pneumatic knuckle-joint press completely with underframe and with special tool. NP: approx. 2000? AD-ID: A198331 More Infos click here
tube pulling tool, Winag, RZA 350-750, , Tubing hauling equipment of Wimag, type RZA 350-750, 350-750 mm, load-carrying capacity 1500kg, dead weight 165 kg, newly AD-ID: A244219 More Infos click here
Krantraverse for Materiallangutlager Bartels, Bartels, LP-2, , Attention, here only two Langutpaletten Bartels offered! Maximum load 2500kg. Simple handling of material through long fast, economical means of loading crane or forklift trucks. Attention, due to lack of space special prices on all the machines! All information given in good faith but without guarantee! Keywords shelf shelves, wide span shelving, plate racks, Langgutregale, plate racks, drawer shelves, roll-off shelves, [...Technical data truncated] AD-ID: A156203 More Infos click here
Galvanizes to gratings, 2110 x 1000, 33 Stueck, , 1 post to gratings verz. Gitterrosten(33 piece) of
size of 2110 x 1000 mm height of 35 mm of mesh 30 x 30 mm AD-ID: A263290 More Infos click here
1172 Deckel DMU-60T Vertical Machining Center, 1172 Deckel DMU-60T Vertical Machining Center, 1172 Deckel DMU-60T Vertical Machining Center, Deckel DMU-60T Vertical Machining Center
- Purchased new in 2005
- Heidenhein iTNC-530 contouring controller
- 18,000 RPM - HSK-63 holder interface
- 24 tool pockets
- Heidenhein Glass Scale Direct Measuring System
- Blum Laser for tool measuring
- Heidenhein TS641 Measuring Probe
- Production Package consisting of:
o 580 psi thru spindle coolant
o 160 gallon coolant tank
o Rotating clear view window
o Chip rinsing in cabin door
o Paper Band Filter
- Chip Conveyor
- Spray Pistol
- Heidenhein electronic handwheel
- Approximately 4,360 hours of program run time (as of Dec 07)
- 39.4” x 23.6” rigid table
We are asking $160,000 for the DMG 60T - 3 axis machining center. Our goal is to sell this machine and take the funds to use towards an additional 5-axis machining center. We are in greater need of 5 axis than 3 axis at this point. There is nothing wrong with the machine, it is simply a capacity issue for us. The machine is utilized in our medical manufacturing area and the machine will show extremely well for any buyer.
Steel section pipe, Welser Profile, RP-10845-2, , diameter 55 mm of thickness 2
mm of total number: 990 pieces of x 6000 mm AD-ID: A310649 More Infos click here
Steel section pipe, Welser Profile, RP-7860-1,5, , width 75 mm height of 18 mm
of thickness 1.5 mm of total number: 310 pieces of x 6000 mm AD-ID: A310651 More Infos click here
Stamping machine for Metall-Profile, Esco, Comall, , Stamping machine for metal-pro-fell from Esco, type Comall, electropneumatically + Noname, for window construction AD-ID: A320761 More Infos click here
Intermodern ITD Band, ITD Band, Intermodern, , Ladies and Gentlemen! Below we offer not-binding: Make: Inter+modern designation: Thread drill press Type: ITD volume year of construction: 1971 Technical data: For the work area to M8 cuts from the inside and external threads punching out and riveting please communicate you to us whether you are interested still in the acquisition of such a machine. If you should look for other objects, or intend even sales, we ask likewise for your noncommittal information. With interest we hear gladly of you. AD-ID: A269098 More Infos click here
Rotary machine, , , hydraulical, diam. of center plate 550 mm,with 12 receiver and 2 rivetting stations, each with seperate pressure intensifier, table 700 x 900 x 800 mm
Electrical plugs must be added., AD-ID: A467304 More Infos click here
, Amada, Amada Vela II 305050, , Rewolverstanzmaschine Amada Vela II 305050 Manufacturer: Amada Model: Vela II 305050 year of construction: 1984 country of manufacture: Japan location: Germany, Stuttgart Liferzeit: Immediately Steurungstyp: Fanuc V, system 6M max of gumption strength: 300 KN Dimensions of the machine: - Work length: X-1270 mm - Work width: Y-1270 mm Max plate thickness: 6.35 mm Number of impacts per minute: 350 machine: 30,800 h Revolwer: 56 Verkzeugtneste of dimensions of the machine: Length: 4845 mm Width: 3031 mm Height: 2370 mm Weight of the machine: 15,000 kg Was entitled to the machine: Very well, benuezt for sheet metal 0.5-0.9 mm Further information: - Knows one the machine ready for use seeing - approach warranty with buyer AD-ID: A432098 More Infos click here
Solar assembly stand, , Alu, , Solar assembly stand aluminum consisting of: 1 x lightning stand 3,5m; 2 x roof and Kaminkehrerleiter/15 and 10. 2 x Verbindungsflaschen.1 x 2 roofridge shears; short supports. With wood edition. Demonstrating stand! AD-ID: A198326 More Infos click here
Tubing cleaning machine, Marco, , , Marco tubing cleaning machine machine 230V with automatic feed motion and drum, with 16-mm-Spirale and foot switch. AD-ID: A198315 More Infos click here
Pre-setting equipment , Messma - Kelch, Trabant 271, , - Pre-setting equipment - year of construction 1987, very good condition - Bed. Guidance available - manufacturer Messma - cup - type satellite 271 - Laenge 1580 mm - width 860 mm - weight 425 kg - top plate diameter 700 mm - no Werkzeugaufnahmen AD-ID: A414349 More Infos click here
Entgratungsmaschine: Rotor finisch , , , , - drum diameter: 850 mm + 1000 mm - 3 kW power - Outdoor Mass: B: 1700 x H: 2300 x D: 2000 is good AD-ID: A444459 More Infos click here
Crane Plant , Hydro Bull, 2000, , Capacity: 2 t machines Weight: approximately 0.5 tonnes of space: about 2.2 x 1.5 x 2.1 m AD-ID: A460286 More Infos click here
Furnace/temperature furnace, Heraeus, , , HR-REF-1433 kind of machine: Temperature furnace manufacturer: Heraeus Voetsch weight approx.: 370 kg of mass approx.: L (mm): 1,030 B (mm): 850 H (mm): 1,240 mass inspection room L (mm): 470 B (mm): 510 H (mm): 470 technical data: Temperature range from -80 to 120 Material: High-grade steel accessories: Underframe condition: maintained and ready for use price: 2.500, - euros net location: Region bathing Wuerttemberg shipping equipment locally: missing Dismantling, loading and transport are task of the buyer. The trading firm Ravensberg organizes if necessary gladly the loading/transport of the commodity. AD-ID: A324325 More Infos click here
Punching Press - Single Column, PEDDINGHAUS, HYDRAULIC 100 (#18425), Machine has many accessories,
pressure: 100 t
stroke: 0 - 100 mm
throat: 510 mm
table width: 420 mm, AD-ID: A232622 More Infos click here
Blow moulding machine , BATTENFELD, FISCHER FHB 054-1, , snail diameters: 70 mm max. snail numbers of
revolutions: 100 obr.min 2-Schlitten, 3-Revolver, additionally a gun,
two forms for can production 5 L. Container production max. 3 x of 750
ml with 3 guns total connected load: 68 KW of control: Mueller total
weight: 3,700 kg of Year OF production: 1993 larva in: Germany AD-ID: A430528 More Infos click here
Respiratory protection system , Adflo, mit Geblaese, , Protective mask (Draeger full face mask Futura) with blower box with Ersatzakku and battery charger AD-ID: A333678 More Infos click here
Container lathe fixture , Fabrikat ESAB, Typ 80RTN, , max. Load entire 80to.
Behaelterdurchmesser 500-7.800mm, number of revolutions 60 -
1200U/min, role diameter 560mm AD-ID: A383109 More Infos click here
Whirl-riveting machine , BODMER, BK 120/NM, , rivet shank diameter: 2 to 11 mm air pressure: about 5 spindle bar pillar: 170 mm spindle table: 355 x 355 mm Weight: 355 kg with foot switches and sockets machines, various accessories, AD-ID: A465678 More Infos click here
Riveting Machine, Dunkes, DN 4, , Pressure 4 t diameter 20 mm stand passage 200 mm total output need 1.1 KW machine weight approx. 0.4 t space requirement approx. 1.1 x 0.7 x 2.2 m AD-ID: A426020 More Infos click here
SHOP of SPECIAL OFFERS , , , , Subject: OFFER günsige SHOP machines directly from STOCK immediately from stock, subject to error and intermediate sale, available: 1 mech.RUeCKLE-Zentralspanner jaw width 200x60mm, opening 260mm, with scale-Turntable 360 degrees, 270x340 foot, tree aces 640x340x200 mm in height, weight ca.80kg. 199, - VB. 1 dto. 280 br.x90 h, opening 300, Turntable, 650x280x230 h, w 85 kg. 199, --VB/Gebot 1 CEKABA 160x40-220mm opening, 69.99 VB. [...Technical data truncated] AD-ID: A325714 More Infos click here
Hydraulic aggregate, Rexroth, , , Hydraulic aggregate of Rexroth, with cooling, up to 100 bar, with switchgear cabinet, for CNC machines (Fritz Werner/Niles), 2 stucco are present, price VB AD-ID: A320785 More Infos click here
Splinter excavator bucket, Eigenbau, L/B/H 760/400/430, , Spänekuebel length of 760 mm and 400 mm wide level to 430 mm roles lenkbar (about 20 pieces Stock) AD-ID: A263493 More Infos click here
Ringbiegeautomat , , , , Ringbiege-vending machines basic data Title: OMAS FAB 3 Model: 00155B/WW Built: 2000 to wire manufacturing strengths: 2.00 4.00 mm to manufacturing ring diameter: 50 700 mm i. output: about 60 pieces / min. For manufacturing materials: Edel-/Kupfer-/Federstahldrähte galvanised wire and accessories servo converters of the series with SDC Biegerollen If necessary. Even with reel, brake and catchment roles and knives Extras [...Technical data truncated] AD-ID: A470801 More Infos click here
Aufspanntisch , Aufspanntisch , Unbek., , table length: 1600 mm table width of 900 mm table height: 910 mm slots total: 6 pc. Grooves width: 15.7 x 35 mm plate thickness: 55 mm machine weight: about 0.6 tons AD-ID: A460295 More Infos click here
Induction oven, Heraeus, M 110, , Hardinx oven Heraeus 1.100 - Make. Heraeus - type. M 110 - Age. 1994 - Degrees instelbaar dead 1,100 gr. - Digitaal instelbaar - Tijd + Tempr. - Within leading seaman afm. - L x B x H. 200 x 370 x 150 mm - Nieuw prijs. Euro 3,800, - - Verkeerd i.z.g.s! Please note: The above information has been obtained ton the best OF our ability and amounted from, and from the manufacturers where possible. It is given in good faith, but its accuracy CAN emergency fuel element guaranteed. Accordingly, it wants emergency form A representation or constitute contractual term. Incoming goods advise you ton of checks any AD-ID: A440451 More Infos click here
grinding unit, Suhner, , , drive power 0.8 KW of tension 220 V total
output need 0.8 KW machine weight approx.. 0.04 t space requirement
approx.. 1.2 x 0.5 x 0.5 m AD-ID: A298476 More Infos click here
Machinery threaded sleeves M 8 - M 27 , , , , HR-REF-2103 kind of machine:
fully automatic production plant for threaded sleeves and anchor cases
M 8 to M 27 manufacturing/machinery mass approx.: Space requirement
approx.. 160 m technical data: - 1 eccentric press 60 t - 1 eccentric
press 80 t - 1 semiautomatic thread cutting machine for M 16 - 1
thread automatic cutting machine for M 27 - 1 thread automatic cutting
machine for M 20 - 1 sawing automat with load magazine M 8 - M 12 - 1
sawing automat with load magazine M 16 - M 27 - 1 conveyor supply - 2
shears with hole dance mechanism - control units and switchgear
cabinet for fully automatic manufacturing condition: - still
completely price installs: 58.000, - euro net location: Region
Rhineland-Palatinate availability off: immediately shipping equipment
locally: available the trading firm Ravensberg is a machine broker.
They buy machines directly with us from the owner. For buyers no
commissions develop.When desired we organize machine transport. Mistakes in the offer
remain reserving. AD-ID: A436803 More Infos click here
Gear hobbing / shaper, , , OFFER
FULL CONTAINER FILLED WITH ” SECOND HAND MACHINES “ - FD800
- FD630
- 5140
MAIN TECHINCAL CHARACTERISTICS:
Gear hobbing machine type FD-800
-max. hobbing diameter 800 mm
-max. module of teeth 10 mm
-axial travel of milling head 450 mm
-min. number of teeth 8
-table diameter 800 mm
-main spindle speed range 45-315 rot/min
-main motor power 7,5 kw
-weight 12.500 kg
-overall dimensions:
-length: 3040 mm
-width: 1870 mm
-height: 2150 mm
Gear shaper machine type 5140 – Russian
Max. module of gear 8 mm
Max. diameter of worked gear 500 mm
Limits 65-450
Main engine power 3,7 kw
Dimensions 1750x1250x2350 mm
Weight 4200 kg
Gear hobbing machine type FD-630 Max. working diameter 630 Module 10 Weight 10 to.
Transportation unit of oval pipes , , , , 1 Transportation and printing unit for Oval pipes 3000 mm long for 80-1100 mm (without lifting and Verfahreinheit) Manufacturer: Spiro system (Switzerland) Year of manufacture: 2003 The device has a built-in the head hydraulic supply (visible also in the picture ). Electrical supply of cultivated switchboard direct connection to 380 V. Handbedientaster for the press functions. The unit was CAD drawing record with principle drawing constructed. Erford [...Technical data truncated] AD-ID: A353146 More Infos click here
Leo double-sided setting up machine , LEO, , , Leo
double-sided setting up machine for standing crease roofs, 220 V,
range 350 1000 mm, crease height 20 60 mm, weight approx.. 82 kg, with
intake sheet metal, color blue, machine NR. 864 year of construction:
80's AD-ID: A349838 More Infos click here
Double standing folding machine , LEO, Doppelstehfalzmaschine, , Leo double standing
folding machine, with 4 levers, crease height 35-60 mm, weight
approx.. 38 kg, machine-No. 945, color blue, in wooden box, machine in
good condition. Year of construction: 80's AD-ID: A349839 More Infos click here
Aufspanntisch , Nutenplatte, Unbek., , table length: 1200 mm Table Width: 560 mm table height: 180 mm slots total: 3 pc. Grooves Width: 23 x 48 mm machine Weight: about 1.2 tonnes of space: about 1.9 x 0.72 x 0.76 m walk a radial drill with base. AD-ID: A460289 More Infos click here
Unigreifer , , Unigreifer, , The machine is konstriert to discs from 700 to 1700mm with a weight of up to 4000kg to contact It is the crane hook and verfüt operated its own control .. interesting for mass production in Karusseldrehmaschinen The plant was very little use in the design consists of the Absetzer and Gereifer or reverser. additional questions, please contact me with e-mail AD-ID: A447572 More Infos click here
Container lathe fixture , Fabrikat BODE, Typ SAR 1600, , Drive unit 40to., 40to unit lots. "Total burden 80to., Tanks diameter 600-5200mm, completely overhauled, AD-ID: A392594 More Infos click here
Steel tubes, 910 x 10 x 13500 mm, 12 Stueck, , steel tubes diameter 910 mm of wall thickness
10 mm of length 13,500 mm 12 pieces available AD-ID: A279216 More Infos click here
Rain channel forming machine, Wuko, , , Wuko rain channel forming machine with drill press drive. Max Blechstaerke 0,75mm. 230V. The machine is in a good condition. AD-ID: A272609 More Infos click here
Laser Cutting machine TRUMPF L4030 3200W , TRUMPF, TRUMPF TRUMATIC L4030 3200W, , MANUFACTURERS PLAY THE TRUMP CARD TYPE TRUMATIC L4030 TYPE OF RESONATOR TLF 3200 CONTROLLER TYPE BOSCH CONTROL CC220 YEAR OF CONSTRUCTION 1996 RESONATOR YEAR OF CONSTRUCTION 1998 LOCATION WALCZ, POLAND POWER CONNECTION 67KV COUNTRY OF MANUFACTURE GERMANY LIFERZEIT IMMEDIATELY X AND Y AXLE X - 4000, Y - 2000 Mm PLATE THICKNESS MAX: Schwarz-20mm Edelstahl-12mm Aluminium-8mm NUMBER of cutter heads of 2 PALLET CHANGE-OVER SWITCHES LOAD UNIT NO WITHDRAWAL UNIT NO LASER ACHIEVEMENT 3200W MAX of CUT SPEED of 10 m/min JET 22,348 H MACHINE 40,100 H POWER CONNECTION 67KV POSITIONING SPEED of 60 m/min CONDITION of the MACHINE VERY MUCH PROPERTY - RESONATOR TYPE TLF 3200 1998 YEAR OF CONSTRUCTION - NEW ONE REZONATOROPTIK, ALL SPIGELN NEW - NEW X, Y AXLE - NEW REZONATORROHRE - CUT HEAD AFTER REPAIR, NEW LENSES, DUSEN AND CERAMIC(S) PARTS AD-ID: A425160 More Infos click here
Coil Line, HASPELSATZ, , Offer details
Stock-No. 1104-226
Type of machine Coil Line
Make HASPELSATZ
Type Year of manufacture Type of control Conventional
Storage location Lager Mülheim
Country of origin Deutschland
Delivery time sofort
Freight basis frei verladen
Price on request
Technical details
sheet width 400 mm
coil outside dia. mm
weight max. in kg 5000 kg
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
, AD-ID: A444642 More Infos click here
Reworking/second operations machine, PF, PF-35, - control type E 600 B2
- toolslide X-Axis = 120 mm
- toolslide Z-Axis = 35 mm
- 3 reference points on 4 tool mounting on each spindle - different chucking possibilities
- collets W-20
- internal collets 55/60 mm
- claw chuck 90/80 mm
- 2 spindles 500-4000 rpm
- spindle performance 1.5 kw
- stepping motors axis X and Z
- high precision ball rotating spindle
- thread cutting on 1 spindle , AD-ID: A470352 More Infos click here
90 degrees of releasing unit , Destaco, , , 90
Ausklinkeinheit with external hydraulic aggregate for releasing sheet
metals with 2 further punching handles, with round stamp and stencils. AD-ID: A338250 More Infos click here
Bohrerschärfmaschine , Sway, SA-1300-220V, , Schärfbereich: 2 to 13 mm high-angle: 90 - 144 Weight: 11 kg Size: 320 x 220 x 200 AD-ID: A462909 More Infos click here
Corner crimping Machine, Wedi Pressta, PV 10, , profile width 140 mm machine weight approx., 0.350 kg of operating voltage 380 V total output need 3 KW space requirement ca.1, 00 x 0.70 x 1.10 m AD-ID: A311279 More Infos click here
Conveyors , Maschinenbau Kitz, div., , also individually: 1 used conveyor
manufacturer: Mechanical engineering kitz width: 280 mm of length:
6000 mm 1 adjustable foot 1 used conveyor manufacturer: Mechanical
engineering kitz width: 300 mm of length: 6000 mm height: 970 mm
drive: SEW SMM 05C 503-00, 0.55 KW, type GUF-P2000 aluminium 6000/300 AD-ID: A328800 More Infos click here
Belt Grinder Weipert BSM 100, , , Metal Belt Grinder BSM 100
• belt width 105 mm • sanding area 450 x 105 mm • including base • adjustable belt tension -> no more problems due to stretched belts! • belt tension adjustable with front-mounted levery
Specifications BSM 100
capacity 1,8 KW.
drive shaft 170 x 105 mm belt dimensions 100 x 1500 mm
belt speed 25 m/sek size (L x B X H) 820 x 480 x 1100 mm weight 67 kg
Price € 830,-
, AD-ID: A400200 More Infos click here
Saw-Blade Sharpening Machine, WMW-WERKÖ, SWSK H 1250, Offer details
Stock-No. 1104-175
Type of machine Saw-Blade Sharpening Machine
Make WMW-WERKÖ
Type SWSK H 1250
Year of manufacture 1968
Type of control Conventional
Storage location Lager Mülheim
Country of origin Delivery time nach Absprache
Freight basis frei verladen
Price on request
Technical details
saw blade diameter 1250 mm
workpiece-spindlehead motor kW
grinding wheel diameter 250 mm
total power requirement 1,7 kW
weight of the machine ca. t
dimensions of the machine ca. m, AD-ID: A444701 More Infos click here
Turntable , Muehbauer Maschinenbau GmbH, Drehtisch 2500x2000, , Built: 2005 Technical Data tabletop size of 2500mm x 2000mm with 8 T-slots permissible payload of 15 tonnes centric drive of the rotary axis via 4kW servo motor with gearboxes max. Rotary range 180 pneumatic locking 180 centric energy chain's implementation of mech. Aufspannvorrichtungen Profibus connection possible connection data voltage 230V / 400V, 50 Hz All rights reserved. Zwischenv [...Technical data truncated] AD-ID: A406006 More Infos click here
Stamping machine, , , Stamping machine for corner connections
consisting:
- Hydraulic part manufacturer Enerpuc for stamping tool 380V, 1,1 Kw, 700 bar
- Pneumatics with 2 barrels and valves
- electrical control
- table adjustable unfolds for role material max. Ø 2000 mm
Length: 2500 mm bis 4500 mm at turntable opened out
Breadth: 1000 mm
Height: 2010 mm, AD-ID: A387696 More Infos click here
Turbo centrifuge automatic, REISHAUER-Turbo Separator, VD 14, 120 l oil/min with 15 bar
cooling aggregat 12 kw
from Reishauer RZ, AD-ID: A412403 More Infos click here
Tool turning device (for press, milling machine), Hylatechnik, HWWL 1400 S, ,
the machine serves for it large tools to drive apart and upper section
to put around it to work on in the back off to be able. In addition it
has Tuschierarbeiten pressing force a pressing force of 80kN for tries
- and: 80 kN table size: 1,400 x 1,200 mm of min. height: 500 mm
stroke: 600 mm max. tool tools: 10,000 kg machine weight: 9,000 kg AD-ID: A300078 More Infos click here
Grinding machine toll, KÄMPF Typ H 55, KÄMPF Type H 55, greatest cutting angle 45 gradient, greatest bore hole of collet 24 mm, MK-2 seat for mill tool, greatest radius to mill 20 mm, greatest length to mill 80 mm, max. length of loading 160 mm, axial adjustment range of the head 150 mm, axial shifting range of milling spindle 30 mm.
0,2 kW; 2800 Rpm, 4750 Rpm of the milling spindle, AD-ID: A467314 More Infos click here
mobile hydraulic aggregate , Mock, HV 6028, , mobile high-pressure hydraulic pump 0-1600 bar Make mock AGM 6028, for example, to drive for high quality Hydraulikschrauber screw, pneumatic actuator AD-ID: A344922 More Infos click here
Rotating-,Swivelling-, and Tilting Table, , , , clamping 630 x 400 mm slots Number 8 slot width 14 mm rotation of the table - v.Hand / machine swivel 360 + / - 180 AD-ID: A451999 More Infos click here
Clamping angle, -, B/H/L 600 x 450 x 800 mm, , Aufspannwinkel to piece tension dimensions B / H / L 600/450/800 mm30 mm starkLanglöcher 20 mm AD-ID: A321607 More Infos click here
Brake Drum Produktion Line, FENDT, , Complete brake drum production line consists of:
4 vertival lathes FENDT, type S-500
chucking diameter 600 mm
max. swing diameter 750 mm
turning diameter 460 mm
turning length 480 mm, Slides - units 2
Vertical travel (longitudinal slide) 480 mm
cross slide/ram horizontal travel 250 mm
surface area 350 x 350 mm
chuck mid to front edge longitudinal slide 150 mm
Ram, smallest 24 mm,
Ram, biggest 274 mm,
power clamping hydraulic Rapid travel of slides 5600 mm/min
total power requirement 45 kW
weight of the machine ca. 70 t
dimensions of the machine ca. 23,0 x 8,0 x 3,5 m
drilling unit FENDT
transport system
Gildemeister – Devlieg, Gildemeister – Devlieg, Microset, , Ladies and gentlemen, Below we offer subject to: Make: Gildemeister Devlieg name of: setting device Type: Microset Built: Specifications: Haidenhain Ablesetechnik Please let us know whether you still in the acquisition of such a machine are interested. If you are looking for other objects, or even intend sales, we also ask for your non-binding information. When I [...Technical data truncated] AD-ID: A319339 More Infos click here
HILTI Bolzensetzmaschine , HILTI, DX 750, , HILTI Bolzensetzgerät DX 750, needed 3 hours, Neupreis 1200th - DM, bought 1996, in the original case for the 390th - must. AD-ID: A470225 More Infos click here
Saegeblatt - sharp automat, WIDMA, MKS I/ II, , saw blade diameters: 50 - 400 mm of
tooth pitch: 0,5 - 15 mm total output need: 0.6 KW machine weight:
approx.. 150 kg accessories equipment: is possible for 3 feed speeds
chamfering the right and left side of the saw blade tooth AD-ID: A323973 More Infos click here
Granitplatte , OELZE, 1000x800x140 mm, , disk length 1000 mm of slab width 800 mm of plate
thickness 140 mm weight approx.. 325 kg of remark: Well received
granitplatte. AD-ID: A375750 More Infos click here
Bohrerschärfmaschine , Sway, SA-2500-220V, , Schärfbereich: 13 to 26 mm high-angle: 118 - 135 Weight: 27 kg Size: 490 x 260 x 250 AD-ID: A462910 More Infos click here
1161 USED ALUMINUM RELATED EQUIPMENTS FOR SALE, USED ALUMINUM RELATED EQUIPMENTS FOR SALE, USED ALUMINUM RELATED EQUIPMENTS FOR SALE, USED ALUMINUM RELATED EQUIPMENTS FOR SALE
WE WILL PROVIDE DETAIL SPECIFICATION, PRICE AND PHOTOS UPON RECEIVING YOUR INQUIRY.
A. COMPLETE ALUMINUM MELTING, SAND CASTING AND MACHINING PLANT FOR MAKING FOLLOWING ALUMINUM PARTS FOR VARIOUS AUTOMOBILE ENGINES
PRODUCTS : AUTO ENGINE AIR INTAKE MANIFOLD
ENGINE CYLINDER HEAD
ENGINE BED PLATE
ENGINE BRACKET
PLANT CONSIST OF :
HIGH SPEED/TILT MELTING , HOLDING AND LADLE FURNACES
CASTING MACHINES
ALL KIN OF MACHINE TOOLS
LIST OF EQUIPMENTS WILL BE PROVIDED UPON REQUEST.
B. ALUMINNUM MELTING, CASTING ROLLING PLANT
MAKING 6XXXX, 7XXX SERIES OF ALUMINUM PLATE/SHEET AND COILS
PRODUCT SIZE :
PLATE : 8 MM TH.X 1350 MM W
SHEET : 0.8 MM TH.X 1370 MM W
COIL : 0.3 MM TH.X 1320 MM W
PLANT CONSIST OF FOLLOWING EQUIPMENTS
- MELTING FURNACE, 16 TON X 2 SETS
- VERTICAL SLAB CASTER
- BLOCK SAWS, OLIVER
- SCALPER, KNOEVENAGEL
- INDUCTION FURNACE, INDUCTOTHERM, ELECTRIC TYPE
- SLAB PRE-HEATING FURNACE, GIBBONS, GAS TYPE
- 2 HIGH HOT ROLLING MILL
60" WIDTH
2 HIGH REVERSING
ENTRY/EXIT THICKNESS: 340 MM/ 6-8 MM
1300 KW ON MILL MOTOR
SOUTH END- PLATE/SHEET SHEAR
NORTH END-RECOILER
TOTAL REVAMP BY ABB IN 2005
- 4 HIGH COLD ROLLING MIL MAKER : LOEWY ROBERTSON
ENTRY/EXIT THICKNESS : 8.5MM/0.3MM
ABB AGC & AFC
TOTAL REVAMP IN 2006 BY ABB - 4 HIGH COLD ROUGHING/INTERMIDIATE PLATE ROLLIG MILL
MAKER : DAVEY
ENTRY/EXIT THICKNESS : 20MM / 0.8MM
MAX WIDTH : 1372 MM
- 2 HIGH HAND ROLLING MILL ( FINISH) MAKER : TAYLOR AND FARLEY
ENTRY/EXIT : 25MM/0.5MM
MAX WIDTH : 1676 MM
- SLITTING LINE, ROBERTSON, 1320 MM WIDTH
- CUT TO LENGTH LINE, BIGWOOD, 1321 MMWIDTH
- ROLLER LEVELLER
- GUILLOTINE SHEARS - SHEET AND PLATE STRETCHERS , 400 TON, 300 TON, 150 TON & 125 TON CAPACITY
- BLANKING PRESS
- HEAT TREATMENT OVENS, 4 SETS
- SOLUTION TREATMENT LINES
ALL THE EQUIPMENTS IN THE PLANT STILL UNDER POWER
C. ALUMINUM EXTRUSION PRESSES
1. 3600 M.TON ZAMET EXTRUSION PRESS
4 POST,OIL HYDRAULIC TYPE, 220/270/325 MM DIA BILLET, WITH GAS BILLET HEATER,
RUN OUT TABLE AND STRETCHER, BUILT 1980
2. 2750 M. TON FIELDING & PLATT EXTRUSION PRESS
3 POST, OIL HYDRAULIC TYPE, 9" & 12"BILLET DIA, WITH GAS BILLET HEATER, QUENCHING,
PULLER, TRANSFER TABLE AND 100 TON STRETCHER, BUILT 1964
3. 2500 M.TON ZAMET EXTRUSION PRESS
4 POST, OIL HYD TYPE, 175/220/275MM BILLET DIA, WITH INDUCTIO BILLET HEATER, RUN
OUT TABLE, STRETCHER, BUILT 1982
4. 2200 TON YOUNGSTOWN EXTRUSION PRESS
4 POST, OIL HYD. TYPE, 8" DIA BILLET, WITH WATER QUENCH, AIR QUENCH, BILLET LOG
HEATER, PULLER, RUNOUT TABLE, LIFTOVER SYSTEM, COOLING TABLE, STRETCHER,
SAW, SAW TABLE
5. 1800 TON UBE EXTRUSIPN PRESS
4 POST, OIL HYD TYPE, 7" DIA BILLET, WITH AIR QUENCH, GAS BILLET LOG FURNACE,
PULLER, RUNOUT TABLE, LIFTOVER SYSTEM, CLLOING TABLE ANS STRETCHER, SAW,
SAW GAUGE/STACK TABLE, BUILT 1977
6. 1750 TON BLH EXTRUSION PRESS
3 POST, OIL HYD. TYPE, 7" BILLET DIA, ALLEN BRADLEY PLC, GAS BILLET FURNACE,
PULLER, RUN OUT TABLE, LIFTOVER SYSTEM, COOLING TABLE, STRETCHER, COLD SAW,
SAW TABLE, BUILT 1984
7. 1650 TON YOUNGSTOWN EXTRUSION PRESS
4 POST, OIL HYD. TYPE, 7" DIA BILLET, ALLEN BRADLEY PLC,AIR QUENCH, BILLET LOG FURNACE, PULLER, RUNOUT TABLE, LIFTOVER SYSTEM, COOLING TABLE, STRETCHER,
COLD SAW, SAW TABLE, BUILT 1972
8. 1600 TON CLECIM " INDIRECT " EXTRUSION PRESS
4 POST, OIL HYD. TYPE, 189 MM DIA BILLET, QUENCH, PULLER, BLT TYPE TABLE,
100 TON STRETCHER, OLIVER SAW, 1987
Drill unit, LINDENMAIER, D 30381, diameter of spindle near bearing 35 mm, spindle head DIN 2079-30,
motor 220/380 V; 1,1 kW, 2800 rpm., AD-ID: A389420 More Infos click here
mobile work bench , Thurmetall, L/B/H 1000/700/850 mm, , -mobile-vice einklappbar, height-adjustable table 1000 x 700 mm 850 mm height -5 drawers AD-ID: A394291 More Infos click here
Späne-/Kratzbandföderer , Knoll Maschinenbau, Bad Saulgau, Typ 300 K - 2, , Kratzbandförderer from Chiron FZ 18 Type 300 K - 2, No. 01 series / 2914449 / 01 division chain around 500mm. Total Length: 4000mm width Föderband: 310mm width chips Box: 1500mm length chips Box: 950mm Mass sketch pictures and send us to desire. AD-ID: A470194 More Infos click here
Multiple-cornered lathe , KEKEISEN, TORNOMAT 2 C, , work area hexagonal 3-36 mm square
3-28 mm turning length max. 60 mm of 2 knifeheads tensioning
arrangement passage 40 mm AD-ID: A419858 More Infos click here
Brushing machine , MIK, , , new one motor brushing machine MIK
brush: 250 mm of brush thickness: 160 mm table size: 160 x 510 mm
(lengthwise adjustable) of number of slots: 4 pieces verfahrweg along
1400 mm verfahrweg perpendicularly 230 mm AD-ID: A391377 More Infos click here
Kernschiessmaschine, coldly , FISCHER DISA , GFD 25, , dimension of the lateral clamping
plates: 450 x 500 mm height of the core box: max. 800 mm of min. 520
mm broad of the core box: max. 900 mm of min. 330 mm of max. ones
depth of the core box: 1,000 mm of shooting capacity: 25 dm3 contents
of the sand funnel: 200 dm3 Elekrtoanschluss: 11 KW of total
dimensions of the machine: 3,400 x 2,700 x 3,450 mm total weight:
3,000 kg of control: LAUER PC 9000 Year OF production: 1997 AD-ID: A355461 More Infos click here
Kernschiessmaschine, coldly , FISCHER DISA, GFD 40, , dimension of the lateral clamping
plates: 510 x 650 mm height of the core box: max. 960 mm of min. 580
mm broad of the core box: max. 1,200 mm of min. 430 mm of max. ones
depth of the core box: 1,100 mm of shooting capacity: 40 dm3 contents
of the sand funnel: 200 dm3 elektroanschluss: 12 KW of total
dimensions of the machine: 4,000 x 4,100 x 3,150 mm total weight:
3,500 kg of control: LAUER PC 9000 Year OF production: 1997 AD-ID: A355464 More Infos click here
Bending machine STIERLI , STIERLI, 60 He spez., , pressing force: 600 KN (60 tons)
stroke: 300 mm height of support plate: 600 mm broad support plate:
350 mm table height: 900 mm table width: 980 mm of stamp admission:
Square max. Size of 200 x 200 mm (however also smaller possible)
inserting width: 350 mm, opening between support plate and stamp
admission stamp inclination: the stamp inclination is to be adjusted
by a handwheel. Hydraulics: for continuous operation (2400 Std./Jahr) laid out cut cylinders: Cut strength 3 KN (3to) pulling stroke
30 mm speed of 2 seconds/stroke operating speed: Advance/return 1: 2
setting 1,5 mm/min. Bend 0,5 mm/min. (adjustable 0 to max) return 3,0
m min. fixed like a setting engine performance: 7,5 KW connected load:
3 x 380V/50Hz 25 A control voltage: 24 V weight: approx.. 7,700 kg AD-ID: A433290 More Infos click here
Rohrentgratautomat , RSA, NK 2000, , Rohrentgratautomat with Placement robot Make: RSA Type: NK 2000 Built: 1983 work area - Length: up to 2000 mm - Diameter: 8 - 80 mm wide range of accessories AD-ID: A416914 More Infos click here
Rework machines , Eigenbau, Eigenbau, , various post-processing machines for Fassondrehteile to Dia. 20 mm, for drilling, slots, and Andrehen Tapping AD-ID: A368567 More Infos click here
Granitplatte , CARL MAHR, 1000x630x100 mm, , disk length 1000 mm of slab width 630 mm of plate
thickness 100 mm of remark: Well received granitplatte with 4 Stk.
hoehenverstellbaren feet. AD-ID: A375752 More Infos click here
Work bench, werktisch, packtisch, workbench , , Tisch ausPalettenregalmaterial 286 x 110 x 82, , montagetisch,
werktisch, heavy load table, packtisch, table 286 cm we offer broad
here a table from mark pallet shelf material with the masses 286 x 110
x 82 (B x T x H) to you. The table applies within the professional and
private sector its, e.g. as montagetisch, werktisch, heavy load table
(e.g. for engines), to packing table, presentation table in the
Showroom... Learn its extreme maximum stress to estimate stability and
variability! The modular building method hardly leaves desires open,
and is always expandable, then as many as desired cultivation tables
can be supplemented e.g. at a basic table. Of course our tables are
combinable also to our pallet shelves. By a co-ordinated program at
shelf components such as framed stanchions, edition carriers and many
other accessories the table can be adapted to your needs and spatial
conditions.E.g. the transverse loads can be minimized and nevertheless offer the
table absolute leg liberty by the employment of an additional cross
beam. Also an additional file soil is not a problem. Characteristics
of the stands: * From 2 omega stand profiles with sturdy baseplates *
powder-coats in Enzianblau ral 5010 * Ausfachung from galvanized
C-section characteristics of the cross beams: * powder-coats inclusive
mounting material in pure orange ral 2004 * against unintentional
digging characteristics of the table: * Width without plate 286 cm *
carrying capacity of the side stands: theoretically 12,000 kg *
carrying capacity of the pair of cross beams: practically 1,210 kg *
height: starting from 70,5 cm (all 5 cm rising, 75.5 80.5...)
available * depth: 110 cm (also in 70, 90 cm available) * all depths,
all heights = a price * cultivation table starting from EUR 130.00
inclusive VAT. This offer is an example offer.If you need thus different heights, lengths, depths and widths, a
telephone call is surely worthwhile itself for you. In order to
minimize and the table your individual needs adapt forwarding
expenses, we recommend to you with your local wood dealer a plate e.g.
multiplex, splinter or MDF, manufacture ourselves to leave. That is
substantially more favorable for you and you can the plate select
itself, which corresponds to your need. For a table with the masses
286 x 110 cm we recommend a multiplex plate with the masses 300x 125
cm and after strength your need. Note: Please you note that the
absolute height of the table results from the height of this table +
the strength of your selected plate the table divided supplied. And
reduces in price transport table facilitates - fresh from the factory AD-ID: A409013 More Infos click here
Universal - crankshafts - fixed rolling machine , HEGENSCHEIDT, 7891 - CNC, , * MACHINE IS
SUITABLE TO ROLLS BY APPLYING PRESSURE of the transition radii AT
CRANKSHAFT HEAD AND CONNECTING ROD BEARINGS!! * CNC control SIEMENS
spindle number of revolutions = 105 UpM. Fixed rolling strength = max.
30,000 N offset angle of the crankshaft = arbitrary camp diameter = 30
- 85 mm distance between bearings of the crankshaft = mind. 42.5 mm
camp widths = mind. 19 mm of min./max. Stroke of the crankshaft =
60/130 mm of max. Length of the crankshaft = 1,100 mm of laminating
numbers pressure up and dismantling (2 - 3) arbitrarily adjustable
laminating number pressure (4 - 12) arbitrarily adjustable. Cycle time
rolls by applying pressure e.g. 4-huebig 5-fold stored crankshaft =
approx.. 3 Miniuten AD-ID: A423311 More Infos click here
Extrusion Press Line, Lindemann, backloading, recond. 2005, proof of 98 % of prod. efficiency, 3 columns capacity 2000 ton/year, this is a complete line in very good condition, as is where is, AD-ID: A376453 More Infos click here
drying furnace, EISELT, TV 600, temperature ca. 300 °C
inner size: 500 x 600 x 400 mm
capacity 3 kW
voltage 380 V, AD-ID: A401666 More Infos click here
used injection molding machine, Arburg, Allrounder 320-210-750, clamping force: 750 kN shot volume: 182 ccm screw diameter: 35 mm Werkzeugöffnungsweg: max. 375 mm Werkzeugeinbaulänge: min. 250 mm Werkzeugaufspannfläche: 320 x 490 mm Aufspannplatten: 490 x 490 mm , AD-ID: A464194 More Infos click here
HSC machine, KLINK, HSC 60, Travel axes (X x Y x Z): 600 x 300 x 150 mm control type: Aradex Klink CNC spindle revolutions: - 40.000 rpm input 4. axes / C-axes (Hirschmann)Power: 8 kW , AD-ID: A412011 More Infos click here
Container lathe fixture , Fabrikat BODE, Typ T/CR1000, , drive unit 25to., lots unit 25to., total
cost 50to., container diameter 550-3000mm, completely overhauls, AD-ID: A407174 More Infos click here
Wire processing machine , Jouhsen Buendgens, MJ 0520, , wire-processing machine was for the manufacture of Ableiternägeln. Very good condition. Included wire device and teaching Schleifeinheit. overhauled by the manufacturer in 2004. AD-ID: A463516 More Infos click here
Degreasing and Gleitschleifmaschine , Roesler, R125-SO, , little-used degreasing and Gleitschleifmaschine became the degreasing of semiconductor nails. Included drying unit Make Rösler SDD125P-SUN Volume: 125 litres, control: Siemens PLC PLC OP7 Very good condition. AD-ID: A463517 More Infos click here
FROM dissolution LOCK-MAKING: , , , , we offer from MASCHINENBAU-AUFLOeSUNG, subject to error and intermediate sale: 1 dto. MIG / MAG-shielded welding factory. Schaaf / Vlotho (type Esab) Type SG 180, air cooled, area around 30-180 AMP/380V, 8 Schweissstrom-switching, wire feed infinitely from 0-10 m / min, el.Kontrolleuchte, 3 m hose package with torches, wire new role Strengths 0.6 - 0 ,8 - 1, 0 mm, SOLID TYPE 300 kg, accessories, mass 840x400x720mm high, mobile, in Einsat [...Technical data truncated] AD-ID: A415383 More Infos click here
Break forming press , M. Brueck KG, PA3 372500/500 H, , M. Brueck KG type PA3 372500 / 500H No: 71941 Universal Press power 63/40 Brück Abkantpresse AD-ID: A418847 More Infos click here
sandblasting machine, SAPI, SP 200, , flow width 1350 mm run to 900 mm batch weight 300 kg total power demand - kW weight machines around 0800 tons space approximately 1.7 x 1.6 x 1.8 m AD-ID: A444670 More Infos click here
a full container with “ second-hand” radial drilli, a full container with “ second-hand” radial drilli, a full container with “ second-hand” radial drilli, a full container with “ second-hand” radial drilling machines - all made in Romania.
GR 820 9 to. 6.000 EUR
GR 70 7 to. 5.000 EUR
GR 50 5 to. 4.000 EUR
GR 50 5 to. 4.000 EUR
TOTAL: 26 to. 19.000 EUR FCA Romania
, AD-ID: A425041 More Infos click here
Carriage , Unbek., , , carrying capacity: 5 t machine weight: approx.. 1 t
space requirement: approx.. 3.1 x 1.5 x 0.52 m loading area: 1500 x
3000 mm 2-Achslenkung tyre 400 mm full rubber AD-ID: A421178 More Infos click here
Fork-lift truck - electrical , PEG, F 1550 EP, , carrying capacity in kg: 1500 kg
of fork length: 1000 mm of tension: 36 V machine weight: approx.. 2.8
t space requirement: approx.. 2.7 x 1.1 x 1.8 m AD-ID: A421179 More Infos click here
Fork-lift truck - electrical , Komatsu, FB 30-2, , carrying capacity in kg: 3000 kg
of fork length: 1200 mm of tension: 72 V machine weight: approx.. 7 t
space requirement: approx.. 4.1 x 1.4 x 2.4 m accessories: -
Seitenscheiber - battery charger AD-ID: A421180 More Infos click here
Elevating truck platform - electrical , Wagner, Schildkroete, , carrying capacity in
kg: 1000 kg of fork length: 1200 kg of fork width: 650 mm stroke: 2950
mm of battery: 24 V machine weight: approx.. 2.0 t space requirement:
approx.. 2.7 x 0.9 x 2.0 m battery newly accessories: - battery
charger - new front wheels AD-ID: A421181 More Infos click here
PUNCHING MACHINE LVD DELTA 1000 , LVD, LVD DELTA 1000, , MANUFACTURER LVD COMPANY
N.V. TYPE DELTA 1000 CONTROLLER TYPE YEAR OF CONSTRUCTION 1995
LOCATION POLAND PLACE HERSTELLUNGSLAND BELGIUM LIFERZEIT IMMEDIATELY
WORK AREA X y X = 2000 Y=1000 MAX.PLATE THICKNESS BLACK 6 MM OF NUMBER OF IMPACTS PER MINUTE OF NUMBER
OF STATIONS 20 ROTATION HEAD (ROTATION) WEIGHT OF THE MACHINE 16,000
KG CONDITION OF THE MACHINE PROPERTY CAN DO MAN ONE THE MACHINE READY
FOR USE SEEING APPROACH WARRANTY WITH THE KAUFER AD-ID: A421221 More Infos click here
Hardness measuring instrument , Werkstoffpruefmaschinen Leipzig, HP 250, , Brinell hardness and determination of the Rockwellhärt, frame radius of 140 mm, biggest Einspannhöhe 180 mm, weighing 115 kg, AD-ID: A421926 More Infos click here
Through air blast machine, HUNZIKER, SBM 1520, , Loop volume diameter 290 Schleuderrad 2, achievement 7.5 KW of partial dimension min 10mm, max 190 mm of length 6100 width 2050 height 4950 mm AD-ID: A423497 More Infos click here
T-Nutenaufspanntisch , unbekannt, , , t-Nutentisch 1650x540mm, work height 1100mm,
was used probably before times as support for a machine tool. Weight
approx. 900kg AD-ID: A430120 More Infos click here
Rotating-,Swivelling-, and Tilting Table, , , , table length 700 mm table width 320 mm Ausspäneinrichtung 600 x 320 slots number 6 slot width 14 mm rotation of the table - v.Hand / 30 The machine is a Built Built around! AD-ID: A451184 More Infos click here
Tilting containers tilt container stacker , -, ca. 0,8 m³, , - Contents of approx. 0.8 m - with admission for stacker tines - max. Zinkenbreite 150 mm - with tilting mechanics - L/B/H 1750/750/870 mm AD-ID: A423519 More Infos click here
Bar Automatic Lathe Multi Spindle, SCHÜTTE, SF 26 S DNT, Technical details
number of spindles 6 spindle passage 26 mm turning length 80 mm square material 19 mm hexagon material 22 mm spindle circle diameter 224 bar feed 125/290 mm longitudinal slide -travel 80/64 mm spindle turning speed - stepless 600 - 5000 U/min cycle time 0,56 - 56 sec. drive capacity - spindle motor 22 kW dimensions of the machine ca. 7,0 x 1,6 x 2,2 m
Other information 6 Spindle automatic lathe with bar magazin
Highlights:
- Model "S"
- Model "DNT"
- Bar Magazin for 3 m - Tooling
- Delivery time: app. 6 weeks
- very good condition
- inspection under power possible
- Cucchi Bar Magazin , AD-ID: A445428 More Infos click here
Wash - Chamber , RosAuto, Modell 170, , Machines Weight: about 45 kg space: about 0.63 x 0.63 x 1.3 m spray-wash super - including basin AD-ID: A468346 More Infos click here
2 FULL CONTAINER FILLED WITH “SECOND HAND MACHINE, 2 FULL CONTAINER FILLED WITH “SECOND HAND MACHINE, 2 FULL CONTAINER FILLED WITH “SECOND HAND MACHINE, 2 FULL CONTAINER FILLED WITH “SECOND HAND MACHINES”
- PLANNING MACHINE 1600X4000
- SPA LATHE TYPE 8X3000
Planning Machine type 1600x4000
- made in China
- weight: 39 to.
Accessories – 4 planning heads
- 1 grinding head
Lathe type SPA 8x3000 Maximum rotation diameter -over guideways 800 mm -over long cross slides 490 mm -in gap 1050 mm Distance between centres 3000 mm Main spindle bore 105 mm Number of main spindle speeds 23 Main motor power 22 kw Weight 7000 kg Overall dimensions (LxHxW) (mm) 3240x1650x1900
Rotary Table, Peiseler, ATH 800 - S, , Turntable diameter 800 mm of table load 1 t Tischhoehe 280 mm of number of slots of 8 T-slots total output need KW machine weight approx. 0.8 t space requirement approx. 1.4 x 0.85 x 0.3 m AD-ID: A424837 More Infos click here
straightening plate, , , , execution as a hole plate with feet. Length 1500 mm width 1500 mm table height 730 mm thickness 70 mm total power needs - kW Machine weight around 0.75 tonnes of space about 1.5 x 1.5 x 0.75 m AD-ID: A424856 More Infos click here
FULL CONTAINER FILLED WITH “SECOND HAND MACHINES, FULL CONTAINER FILLED WITH “SECOND HAND MACHINES, FULL CONTAINER FILLED WITH “SECOND HAND MACHINES, OFFER
FULL CONTAINER FILLED WITH “SECOND HAND MACHINES”
- SC 14
- FD 630
Vertical Lathe type SC 14
-Max. turning diameter 1400 mm -Faceplate diameter 1200 mm -Max. weight of workpiece 6000 kg -Main motor power 55 kW -Table speed range 5 - 250 rpm -Working and rapid feed range 0,05 - 5 mm/rot -Max. travel of cross rail 800 mm -Weight 16100 kg -Overall dimensions (LxBxH) 4060x4450x3900 mm The lathe is in working conditions and ready to delivery
The motor is alternative current.
Gear Hobbing Machine type FD 630
Max. working diameter 630 mm
Module 10
Weight 10 to.
FULL CONTAINER FILLED WITH “ SECOND HAND” MACHINES, FULL CONTAINER FILLED WITH “ SECOND HAND” MACHINES, FULL CONTAINER FILLED WITH “ SECOND HAND” MACHINES, OFFER
FULL CONTAINER FILLED WITH “ SECOND HAND” MACHINES
- GR 820
- SC 14
Gear Hobbing Machine type GR820
-Maximum drilling steel 80 mm
-Quill travel 400 mm
-Main spindle taper MORSE 6
-Main spindle speed range 20 - 1400 rpm
-Working feed range 0,045 - 0,1,5 mm/rot
-Carriage travel along arm 1600 mm
-Dimensions 3325x1180x3775 mm
-Weight 9000 Kg
Accessories: fixtable
Vertical Lathe type SC 14
-Max. turning diameter 1400 mm -Faceplate diameter 1200 mm -Max. weight of workpiece 6000 kg -Main motor power 55 kW -Table speed range 5 - 250 rpm -Working and rapid feed range 0,05 - 5 mm/rot -Max. travel of cross rail 800 mm -Weight 16100 kg -Overall dimensions (LxBxH) 4060x4450x3900 mm The lathe is in working conditions and ready to delivery
The motor is alternative current.
FULL CONTAINER FILLED WITH: “SECOND HAND MACHINES”, FULL CONTAINER FILLED WITH: “SECOND HAND MACHINES”, FULL CONTAINER FILLED WITH: “SECOND HAND MACHINES”, OFFER
FULL CONTAINER FILLED WITH: “SECOND HAND MACHINES”
- AF 85
- FD 800
HORIZONTAL BORING AND MILLING MACHINE TYPE AF 85
Diameter of boring 85 mm
Boring spindle taper spindle MORSE 5
Working surface of rotary table 1000x1000 mm
Longitudinal travel of rotary table 1000 mm
Vertical travel of main spindle 1000 mm
Horizontal travel of boring spindle 500 mm
Main spindle speed range 12.5-1180 rpm
Feed range,stepless 2-1600 mm/min
Main Motor Power 7.5 kW
Overall dimensions(LxBxH) 4700x3100x2900 mm
Weight 12.000 kg
Accessories – faceplate - countercolumn
GEAR HOBBING MACHINE TYPE FD-800
-max. hobbing diameter 800 mm
-max. module of teeth 10 mm
-axial travel of milling head 450 mm
-min. number of teeth 8
-table diameter 800 mm
-main spindle speed range 45-315 rot/min
-main motor power 7,5 kw
-weight 12.500 kg
-overall dimensions:
-length: 3040 mm
-width: 1870 mm
-height: 2150 mm
Lathe fixture ROTOMAX carrying capacity 50,000 kg , , , , rotary device type ROTOMAX (on the photo red) with storage rack for the rotary device (on the photo blue), bearing 50,000 kg, Bj 1995, very good condition, Brand: Vetter conveyor, P = 4 , 4 kW, weighing 4,300 kilograms, Raddistanz 4,000 mm, inclination angle of 20, speed 2.6 m / min. AD-ID: A425252 More Infos click here
Stamping Machine, Hertweck, K 4, Table length: 220 mm, table width: 165 mm, die power: 2 t, table surface area: 165 x 90 mm, table surface-floor min./max.: 774/1074 mm, table stroke: 7,5 mm, die stroke: 0-150 mm, working strokes per minute until: 41, table stroke-air consumption (6 bar): 6,8 NL, total power requirement: 0,55 kW, weight ca.: 470 kg, dimensions ca.: 0,9 x 0,5 x 1,3 m, with 2-hand-activate and operating instruction. The machine is unused - like new ( from a training workshop )., AD-ID: A428615 More Infos click here
Hardness oven , Neitz, Unbek., , temperature max.: 1150 degrees size of the opening: 450 x 300 mm Machine Weight: about 1.0 tonnes of space: about 1.2 x 1.2 x 1.7 m AD-ID: A468398 More Infos click here
1151 HEAVY HORIZONTAL MACHINING CENTER IR1600MF4, , 1151 HEAVY HORIZONTAL MACHINING CENTER IR1600MF4, , 1151 HEAVY HORIZONTAL MACHINING CENTER IR1600MF4, , HEAVY HORIZONTAL MACHINING CENTER IR1600MF4, PRODUCED IN 1986
Is equipped with the boring spindle of the 160mm dia. with 4 regulated axis and is meant for finishing large-scale basic parts which are made of ferrous and non-ferrous metals under conditions of repetition work.
Constructive peculiarities:
* Screw pairs along all the axis
* Steel telescopic protection of the guides
* Placement of the spindle mandrel inside the column of the portal type guarantees the high rate of firmness and chatter stability during the hard work and provides the high accuracy of finishing
* Milling spindle in the radial direction is assembled in two precision double-row cylinder-roller bearings, and in the axial direction – in two precision double-row radial-stop bearings
* on the left butt-end of the column of the machine there is a device of automatic change of instruments with the magazine of 64 instruments and double-hold rotary manipulator.
The programmed travels:
X – 8000mm (the support cross) Y – 2500 mm (the spindle mandrel in vertical positions) W – 1250mm (the support longitudinal) Z – 1000mm (the cutter bar)
Rotary table – 1600x2000mm (travel – 3200mm)
Bench top size 2700 х 8000 mm.
Max. weight of the work piece – 40 tons
The main drive The cutter bar dia. – 160mm
The cone’s opening in the spindle - ISO 50 The power of the engine - 40 kv The speed of the spindle rotation - 1 5…1250 (5...1600) Max. moment of the boring spindle - Нм 3500 Max. moment on the milling spindle - Нм 6000
The tool bank contains 64 items The total machine weight – 85tons
Clamping , Aufspannplatte, Aufspannplatte, , table surface: 2400 x 1000 mm sheet strength: 300 mm slots total: 4 pcs. Grooves Dimensions: 22 x 40 mm machine Weight: about 2.0 tonnes of space: about 2.4 x 1.0 x 0.3 m AD-ID: A468339 More Infos click here
Clamping , Aufspannplatte, Aufspannplatte, , table surface: 2000 x 700 mm slots total: 4 pcs. Grooves Dimensions: 22 x 40 mm machine Weight: about 1.5 tonnes of space: about 2.0 x 0.7 x 2.8 m AD-ID: A468340 More Infos click here
Clamping , Aufspannplatte, Aufspannplatte, , table surface: 1800 x 600 mm sheet strength: 120 mm slots total: 3 pc. Grooves Dimensions: 18 x 28 mm machine weight: about 1.0 tonnes of space: about 2.1 x 0.75 x 0.15 m AD-ID: A468341 More Infos click here
Clinching machine , BOSCHERT, , , Clinching machine BOSCHERT For all further questions we are to you gladly at the disposal. AD-ID: A442789 More Infos click here
Drilling milling machine , FEHLMANN, Picomax, , CNC bandit control For further questions we are to you gladly at the disposal: Their FSA team AD-ID: A442759 More Infos click here
Combination punching machine , FICEP, ST/Super 10, , 35 tons for further questions we are to you gladly at the disposal. AD-ID: A442793 More Infos click here
Electrical hardship oven , BLEIWENZ, KMO / E 8, , Electric furnace hardship Make BLEIWENZ type KMO / E 8 Masch 301077/89 Built in 1989 Specifications: max. 1200 indoor temperature mass WxHxD 800 x 600 x 1000 mm drive value 25.5 kW external dimensions L x wxh 1700 x 1500 x 2100 mm weighing about 2000 kg with - automatic pneumatic door AD-ID: A466006 More Infos click here
Production cell, BECKER, HYBRID-320-PALETTENHUBZELLE, Control Siemens Sinumerik 840 D Pallet size: 320 x 320 mm Additional information Manufacturing cell, consisting of: -- 9 processing stations -- 1 station -- 2 loading and unloading stations Control: SIEMENS SINUMERIK 840 D
Approx. 15,000 hours of operation The production line has die-cast aluminum housing for the automotive industry completed. Further information on request by fax., AD-ID: A445729 More Infos click here
injection molding machine, Ferromatik, FM 320, clamping force: 3.200 kN screw diameter: 85 mm distance between tiebars: 620 mm Schnellspannung Breite 546, Höhe 420 max. Schussgewicht: 1.180 Öffnungsweg: max. 560 mm min. Einbauhöhe: 320 mm Handling Walldorf Zentrierring 200 Kernzug p1 h2 , AD-ID: A453194 More Infos click here
Wire erosion , Seibu, M 500 S, , control Fanuc M 2 X-axis 500 mm and 350 mm axis z axis 310 mm max. Cutting + - 32 AD-ID: A464181 More Infos click here
1177 Pipe-Bending Machine MegaBender VS 76 ERCOLIN, 1177 Pipe-Bending Machine MegaBender VS 76 ERCOLIN, 1177 Pipe-Bending Machine MegaBender VS 76 ERCOLIN, Pipe-Bending Machine MegaBender VS 76 ERCOLINA
Make: ERCOLINA
Type: MegaBender VS 76
New in: ~neu~
Term of delivery: immediately
Price 14.000 Euro
Description:
Text Dimension Unit
electric-mechanical, pinless bending machine with stepless bending speed, 30 different
programs with 9 bends each
Technical details / additionals / accessories
tube diameter 76 mm
wall strength 2 mm
bending radius min. mm
bending radius max. 380 mm
hexagon 40 + 50 mm
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
Some part table - Automatic , Eimeldingen, WS 6-800, , table diameter: 800 mm machine weight: roughly 1.3 tonnes space: about 1.2 x 1.3 x 0.9 m AD-ID: A460287 More Infos click here
Role train , Rollenbahn, Unbek., , Working length: 5800 mm width: 500 mm Roll Width: 2 x 240 mm working height of 900 mm 1 pc. Roller track of 500 x 2900 mm 1 pc. Roller track of 500 x 2900 mm with stop and measuring ruler AD-ID: A460296 More Infos click here
fork lift truck - electric, Jungheinrich, unbekannt, , load capacity kg 1250 kg Hub 2500 mm fork length 1100 mm total power needs - kW Machine weight about 1.5 tonnes of space approximately 2.3 x 1.0 x 2.0 m AD-ID: A468188 More Infos click here
Setting device , Optisches Voreinstellgeraet, Unbek., , : SK 50 Machine weight: about 0187 tonnes of space: about 0.45 x 0.9 x 1.7 m AD-ID: A468393 More Infos click here
stable bench , Promat, 200.25.na, , -width 2500 mm-700 mm depth work height 860 mm drawers 500 mm wide -4 x 140 mm 2 x 190 mm high-vice Peddinghaus Matardor 160 mm wide x -3 workbenches available Prize Piece AD-ID: A471238 More Infos click here
