new, unused, 1 Color Flexoprinting Machine, SMB (D), FD 2, NEW, yet waxed, and unused Machine from 1993, incl. new Switchbaord RITTAL PS400, Printing Speed up to 100 m/min, Materil thickness between 0,2 and 1,2 mm, AD-ID: A143369 More Infos click here
Nilpeter S18 (3Colour), Nilpeter, , Diameter of tube of rewinder 76 Max unwinder 800 mm, printing width 185 mm, web width 187 mm, print length 180 mm, light barrier for unwinder
drying system Typ NPT30 hot air, infrared
unwinder Kiess & Gerlach Typ,REW 2-Abwicklung, fence unwinder dimension of the machine 1m-Länge, 10m Höhe 1,5 m weight 6000 kg, power 16 kW, AD-ID: A345403 More Infos click here
Flexographic printing machine, Wilky-Andermann, , , 2-Farben printing machine, make
Wilky Andermann with exhaust, pneumatic rise of the printing elements,
drying station (hot-air), crane for taking the pressure roll, work
width off 1400 mm, printing width 1200 mm, Vmax: 250 m/min and various
accessories the plant 1997 overhauled completely coupled is this plant
with a 4-Farben-Flexodurckmaschine, make Wilky Andermann side gumption
mechanism with exhaust, pneumatic rise of the printing elements and
the master role, drying station (infrared drying) crane for removing
the pressure roll, work width 1150 mm, printing width 1050 mm, 8 GRP
cases, purchase date: 1999 and general overhaul, both plant
electrically on newest conditions, SPS control. AD-ID: A172364 More Infos click here
Flexoprintingmachine, Windmoeller & Hoelscher, Starflex 1270 mm, see picture Flexoprinting machine for foil, 12-150 my, 8 colour plus 1 additional lacquer unit with drying tunnel, speed 350 m/min, max. web width 1320 mm, repeat 300-1000 mm, unwinder and rewinder diameter 1300 mm and core 70/ 76 / 152 mm, edge guiding control, Corona, web control, cutting unit for max. 3 roll,, AD-ID: A405568 More Infos click here
Flexographic printing machine (2730), Goepfert, FD-S2-N, Size 2500 mm
1 color
blank length max 5000 mm, min 800 mm, thickness 2-5 mm, AD-ID: A315567 More Infos click here
6-colour flexo printing machine, UTECO, Amber 608, Size: width: 1200 mm
Equipment: common impression cylinder (CI)
unwind with flying splice, max. diameter 800 mm
rewind with flying splice, max. diameter 800 mm
Video camera RGB
Viscometers for all 6 units
plate cylinders with diameters 300 - 680 mm with all necessary gears
6 inking units with 8 blades
web guide
gas dryer IMECO
temperature control COREMA of the central cylinder
cooling system
13 ANILOX cylinders
6 electrical ink pumps
8 chambered doctor blades
4 blowers with independent regulation for each section
Tape printing machine, SIAT, L , 3 colour width 150 mm. Deliverd with one set 3 of printing cylinder and 3 anillox rolls., AD-ID: A347289 More Infos click here
VD22, VD22, , Max roller diameter 700 mm, Diameter of tube of rewinder 76 mm
printing width 210 mm, web width 260 mm, print length (1 colour )-250 mm, print length (2 colour )-120 mm, deminsion of the machine 220x150x150 cm, weight 2000 kg, power 10 kW, AD-ID: A345399 More Infos click here
Flexoprinting unit, Honsel, Ho, 4 cplour, width 480 mm, Printing length = 200 -480 mm. Possible to deliver together with an unwinder and with an rewinder ( for paper surface winder), AD-ID: A386090 More Infos click here
Plate manufacture line , Cyrell, Cyrell 1001, , The following machine offered for water plate production analog typesetter Cyrell 1001 E Bj 89 format 90x120cm, plate washer FLWA 1 61x76 cm Bj 2004, drying furnace BASFBj 89 with 7 modules in the format 60x90cm machines can be demonstrated sale in the customer order AD-ID: A379284 More Infos click here
Centraldrum CI 8 collour, Bielloni, Simplaflex NW 8,
Make: BIELLONI
Type: Simplaflex NW 8 colours CI
Years: 1995
· Maximum Printing width: 800 mm
· Maximum material width: 900 mm
· Mechanical speed: 200 m/min
· Printing speed: 150 m/min
· Print repeat: from 290 to 600 mm / gear 5 mm
· Fully automatic unwinder: roll diam. 600 mm with 2 air schaft diam. 76 mm and 152 mm · Fully automatic rewinder: roll diam. 600 mm with 2 air schaft diam. 76 mm and 152 mm
Equipment:
8 colours CI press with automatic sleeve change system for the print cylinders and the anilox rollers
Electrical heater drying system 16 doctor blade
Pneumatic Ink pumps
Web scans FIVE
In line slitting with trim extraction
8 ceramic anilox rollers
2 edge guide (in and out) FIVE
Aprox 30 ceramic anilox rollers
Aprox. 200 sleeves (complete with gear)
This machine is in good conditions, available immediately and can be seen in production
Flexoprintingmashine, Wehmeyer, , , Description interpretation: - vmax: 120 m / min. -- AB: 520 mm - web tension: 250 N - roll diameter max: 1000 mm - Color Works: 6 x flexo chamber doctor blade with 4 x flexo with diving roller turning winder - Electric disc brake - D = 150 mm span Wave - Tänzerbahnzugregelung Anklebetisch push to push = roll change at 60 m / min. Railway memory, pneumatic angesteürt 1-ter maschinengebunden train in the catchment frame Seitenkantensteürung BST, [...Technical data truncated] AD-ID: A467646 More Infos click here
Nyloprint system , BASF / Flint, CW 50/70, , processing installation for exposing, washing and
drying for max. Disk format 50x 70 cm Bj. 2001 1 plate washer CW 50 x
70 for Auswaschmedium water max. Disk format 50x 70 cm resting pluesch
with ozillierendem plate carrier (the pluesch is new) 1 UV tube
typesetter 1 dryer 2 drawers 80 C 1 power pack/voltage supply 400V AD-ID: A361845 More Infos click here
Printing Units Ink delivery to the plate is precisely controlled by the Primographic inking system.The result is highly uniform colour density throughout each and every run. Colours remain consistent. Operator will appreciate the ease and quickness with which makeready can be accomplished. Also the will appreciate the way that the press can be stopped, for extended periods of time, and then started again with little (or no) material loss. Waste costs can, therefore, be minimized.
The inking principle, in combination with U.V.curable inks and the U.V. curing systems, works in harmony with the web transport system to provide a high level of process control.
The unique Primographic printing principle.
Primography uses a combination of a reverse angle, gravure metering blade and a closely tolerenced and volume controlled form roll engraving principles to continuously present a uniform thickness of ink film. A raised-image plate takes the ink it needs from the ink metering system, which returns the starved image to the fountain for complete replenishment. Because images are completely replenished and remetered, on each revolution of the inking system, ghosting is completely eliminated.
The low stiffness, raised image printing plate is presented to the inking system and to the web with tightly controlled positioning assemblies. These assemblies control the contact pressure to both the ink supply system and to the web-and since high viscosity ink is taken carefully to the raised surfaces-uniform ink deposits are made to the plate and in turn to the web. The result is minimized dot gain throughout the printing range-without sacrificing colour intensity. Fill-in, slurring and copy line width gain are minimized when printing large solids with reverse-outs and when printing fine line copy. Also, halos can be avoided. The results are images that are sharp, bold and vivid every time.
Simplicity of design.
Arpeco has aimed to reduce setup times, to simplify maintenance requirements and to allow the operator to monitor production-without having to continually adjust the machine.
The print stations have been designed to be simple and easy to use with ease of access for fast setups, cleanups and simple metering blade adjustment. The standart design incorporates the ability to preset plate cylinder positions-with respect to both the inking system and the web surface-during makeready. Then, the operator need only make fine adjustments to the contact pressures during setup. This saves time, ink and material.
Arpeco has also developed two simple, but very effective, plate cylinder relative image positioning systems-to be used prior to running any material. These systems and procedures allow the operator to easily position images in all print units to within +/- ¼” (5mm) longitudinal register to one another.
When the press is started, the operator need only make minor register adjustments-knowing that all plate gaps will be aligned.
Longitudinal register adjustment is achieved electronically- the operator can adjustment is achieved electronically-the operator can adjust the plate cylinder through 360 degrees, if needed. He can move the plates-quickly in throw off condition, to make large corrections- and then precisely at low, discrete rates for final adjustment. These features are standart and can be easily accessed. Automatic register control can be effectively and inexpensively added to these electronic controls-if they are desired. It is a critical feature of the design that longitudinal register adjustments not involve the rotation of the impression cylinders. Tension changes in the web (before or after the print unit being adjusted) are therefore not introduced. Register hunting, which is normally prevalent in inline presses with mechanically locked impression cylinders and impression cylinder gears, is eliminated.
The main line shaft components are individually dynamically balanced, torsionally properly rigid, and transport the web smoothly through the machine. This concept is critical-consistent, predictable production is the ultimate result.
Ultra Violet Curing System that work.
It is important to maximize the curing capability of the systems while minimizing temperature variations in the web. It is also critical that the operator be allowed quick access to the lamp head assemblies for preventative maintenance.
Arpeco has developed an air-cooled U.V.curing system which provides both.
The majority of air required for cooling by the system can be taken from outside the building. It is passed through the lamp head assemblies and then delivered back outside. This minimizes the use of heated,humidified and air-conditioned air-thus reducing the energy costs-and avoids drawing high negative pressures on doors and windows.
High volumes of air are taken between the lamp head assembly and the web in order to minimize temperature variations in the web. However, the lamp is left in a quiescent high temperature chamber so that effective curing wave lengths can be generated.
The curing lamp heads are capable of 120 (low),200(medium) and 300 (high) watts per Inch energy output. These power levels can be achieved automatically (proportional to
Speed), or can be set manually be the operator. The exhaust system design allows automatic variations of cooling air flow as the lamps change power output-maximum flexibility is the result.
UV printing machine , Fa. Keese, Keese DUI 831-92, , UV printing machine for cardboard and
self-adhesive labels 2/1 colored, printing width 220mm paper width
300mm, Vurschub 0-300mm, metal and Kunststffoeser. Perforation and
Abecker, detention paper dance, Durchstanze, spindle rolling and
lattice departure AD-ID: A434779 More Infos click here
UV Flexo Priniting BHS F -650-8F+IT, , , year 1997
Available upon request
8 printing unit + 1 gravure
auto Register presetting
Air Dryer
UV Dryer
Material - Paper, Foil, Aluminium
cut length 330mm 750 mm
Speed - 200 meter per minute
630 mm printing area, 670 mm With Lamination unit
German Manufacturer, AD-ID: A451436 More Infos click here
Note please that the print repeat range in the datasheet is not 100% correct, it is only the nominal value witch is writen in the documentation from Bielloni. As you can see in the photographes we made today, there is enough space to insert a printingcilinder with a print repeat range of 1200mm. The discs we have mountet on the shown roller have got 400mm diameter. So you can see ther is enough space for a pressure roller with 1200mm printing length. This machine is in good tecnical condition, it is possible to start up the machine for a test producion in case of intest of a customer. It is fitte with all necesarry tools which are needed to start imeadely a printing job., AD-ID: A425749 More Infos click here
3 colors flexo rotation , Windmoelller & Hoelscher, Modell 8100, , 3 colours role to role width max. 800 mm Rapport 330mm previously used for the production of packaging papers and Tütenvordrucken AD-ID: A446949 More Infos click here
