Block belt saw work , MEM, , , block belt saw work Fabr. MEM 1200
Bj. 1990 consisting of: RH task, delivery Flipper to the ingot chariot
block belt saw MEM of 1200 role diameters ingot chariot 4 Stk.
Spannboecke u. 2 trunk - Kettenwender max. Claw opening 900 mm of
roller conveyors length 20 m inclusive reloading re-cutting saw Fabr.
MEM, Bj. 1990 cutting height of 160 mm, 4 mobile saws, drive 4 x 75 KW
of inclusive mode run gift, centring over laser excerpt roller
conveyor + cross transport separation belt saw sharpening machine
Aligator for belt saws soaking basin length 10 m Untertischkappsaege
Socolest different conveyor plants price on request AD-ID: A430873 More Infos click here
Spaneranlage , 2 Spaner SAB, , , Kpl. Spaneranlage with pre and Nachschnittspaner and separating saw for wood 3.6 m in diameter and 35 cm This assly. Andre roundwood sorting boxes with 14 pictures can be sent by e-maiol get AD-ID: A404160 More Infos click here
complete sawmill , Gatter: Wurster und Dietz GXV 71 - Besaeumer: Esterer DKV/E-2C - Hacker: Zeno 420, , , Description of the sawmill, consisting of: Task of round timber of hydraulic Spannwagen (year of construction 1965) mark white with adjustable, remote controlled Hilfswagen full gate Wurster and Dietz GXV 71, type Black Forest with passage 71cm, fully hydraulic with a slope and templates (Documents and/or description available) Year of construction 1956 inclusive approx. 40-50 saw blades Froe ARTA approx. 12m long roller table with prisms and board separation + drive with transmission Driving belt Besaeumer Esterer DKV/E-2C achievement: 30 KW year of construction 1973 passage: 600mm = width, 180mm = height inclusive approx. 15 Besaeumer of circular saw sheets of inclusive role courses + assortment Hacker Zeno inclusive Vibrorinne and steep promoter simply passage: 420mm broad, 130mm Hoehe year of construction 1980 Sharp area with 1 Vollmer more sharply CNHV, year of construction 1964 Mechanics of the gate plant Zubringung by a natural downward gradient of a skew of a feeder stand, further to the trunk/Blochwender (with adjustment possibility of the master lengths by a cone roller table) and/or individual and with a short feeder to the Spannwagen more fuer the gate filling. Far then sharp and prism cut by the gate. Far one by the roller table for the assortment of the prism or sharp cut. Release of the roller table on the transverse promoter to the Doppelbesaeumer. After the Doppelbesaeumer to the separator of the Spreissel and Schwarten over the Vibrorinne to the drum hacker. The drum chopping property was transported over one approx. 50Grad steep scratching promoter to the collecting box fuer chopping property. The besaeumte cut commodity goes over the along and strength sorter to the pile boxes. The plant is sold for reasons of a missing successor and is in a perfect and immediately ready for use condition. Condition: the sawmill plant occasionally still is in enterprise and can be visited at any time. Request further pictorial material!! AD-ID: A421607 More Infos click here
MASSIVE TRENNBANDSAeGE , RAIMANN, BVN- 1100, Schnittmaß 36cm X 30cm, , Very massive separation band saw, driven drive, a maximum of 2 x 18 cm per side, 30cm height of cut, feed variable 0 - 40m / min Drive 18.5 Kw ONLY 4 900th - EUR. AD-ID: A443852 More Infos click here
SPARE PARTS , ESTERER, 1 Komplettsatz Fuehhrungen, , orgnal still packed, 1 complete set of guides for Esterer full gate SS-71st Only 2 950th - EUR AD-ID: A443859 More Infos click here
MECHANIZATION for SAE around automat , LINCK, Mechanisierung nagelneu !!!!, , Linck mechanization has never gone, Qürförderer Förderlänge 9m, 6 - straängig, Bogenvereinzelung with trapeze bars, adjustable seating, Schwartenklappe divided, roller conveyor to zero, with zero Durchlaufkappsäge / Schwartensäge, Eintacktung in Besäumautomat, packed with original sound cabinet , 125 Neupreis 000 - EUR / / / Now only 22 access 500th - EUR. AD-ID: A434636 More Infos click here
Highspeed Chippercanter Line, SAB AUE, PSP 600, Reducing chipper-canter and circular saw technology for diameters up to 35 cm.
control unit with control desks task table with single feeder and advance platoon draw-in table Reducing chipper-canter SAB model PSP 600 Bj. 1994 double wave reduction circular saw SAB model DWRK 350/2 4 Bj. 1995 board separators with clocked Abfoerderer puller left right, back conveyor and chain transverse promoter role course to the cross cut saw double wave saw SAB model DWS 350 Bj. 1997 double wave cross cut machine SAB model KSM 300 Bj. 1997 excerpt with compressed air ejector Springer mini pack with elevating platform disposal Springer consisting of eccentrically swinging screen, bucket conveyor, 2 withdrawal systems (1 x Spaner, 1 x cross cut machine)
Antriebsleistung
Blochzug 2 x 4,0 kW
Einzugtissch 2 x 11 kW Reifenantrieb
4 x 1,5 kW Dreh- und Stachelrollen
Parallelspaner 1, 0,55 kWBreitenverstellung
2 x 55 kW Hauptmotore
2 x 2,2 kW Auszugsrollen
Reduziersäge 1 x 0,55 kw Breitenverstellung
4 x 30 kW Hauptmotore
2 x 2,2 kW Auszugsrollen
Austraggungsbrücke 1 x 3,0 kW Kettenantrieb
Transportband 1 x 3,0 kW
Rollengang 1 x 0,75 kW mit Heb und Senkförderer
Kreuzschnittmaschine
und Nachschnittsäge 1 x 1,1 kW Kettenbett
1 x 1,5 kW Oberdruck
2 x 55 kW Antrieb Doppelwellensäge
1 x 1,5 kW Höhenverstellung
2 x 50 kW Antrieb Horizontalsäge
VOLLGATTER , MÖHRINGER EUR 9 500.--, OS- 650, , Rugged steel gate Möhringer OS-65th Very little wrong, 85th revised, with saws, templates, reduction, drive motor, very little used. Without gap wedge EUR 9 500th - + VAT. AD-ID: A448710 More Infos click here
Reciprocating saw + spannwagen , Link, DS 71, , reciprocating saw Fabr. Left,
type DS 71,500 stroke inclusive spaltkeil with propelled excerpt
rollers roller conveyors of it 3 propelled and 6 Stk. loose gates
spannwagen Fabr. Left inclusive. Hilfswagen type VA + Vy price on
request AD-ID: A429182 More Infos click here
Block belt saw for SAE with Spannwagen, Brenta - Bruessel, DEAUT, , Offer number: HR-REF-1340 Kind of machine: Block belt saw for Saegewerk with Spannwagen Manufacturer: Brenta - Brussels Type: DEAUT Year of construction: approx. 1955 electrical connection: - 380 V - 80 KW Setting up/transportation mass Block belt saw approx.: - L = 1,900 mm - B = 2,200 mm - H = 5,000 mm Setting up/transportation mass Spannwagen approx.: - L 9,500 mm - B 2,300 mm Weight approx.: - 3,000 kg of block belt saw - 4,000 kg of Spannwagen Technical data: - Role diameter 1,800 mm - clamping car opening 1,350 mm - clamping takes place mechanically - the Hauptmotor has 80 KW and over starters is started accessories: - 2 Saegeblaetter - spare spindles - Ersatzfuehrungsarm Option: - it knows when desired DEMAG - Deckenkran with 10 tons of carrying capacity - against surcharge of 3.700 are provided Condition: - the age accordingly Price: 7.000, - euros plus VAT. if the engine coil is overhauled by the buyer Location: Region goods village The trading firm Ravensberg is a machine broker. They buy machines directly over us from the owner. For buyers no commissions develop. When desired we organize machine transport. Mistakes in the offer remain reserving. AD-ID: A314990 More Infos click here
Log band saw, PRIMULTINI, 1000, Complete line with :
- LOGS LOADING SYSTEM to load logs on the saw carriage, "PRIMULTINI" VERTICAL LOG BAND SAW mod. 1000
Flywheels diameter 1000 mm.
"PRIMULTINI" ELECTRIC LOG CARRIAGE Max diameter of the logs : 1000 mm.
-Roller conveyor for band saw unloading
Length 12 mt (approx.), AD-ID: A466688 More Infos click here
Separation belt saw , Stenner Twin, VHT, , Separation belt saw, Fabr. Stenner twin, type VHT Bj. 1987 role diameters 900 mm of 1 supply over lateral roles with hydraulic pressing adjustment of the saw and role supply over ESW 6 Micro processor adjustment Price on request AD-ID: A440389 More Infos click here
Gate , ESTERER, S 56, , Pre and re-cutting gate, hydraulic roller elevation with push pull cable price increase, 560 mm of framework width, with engine and SAE, machine NR. 6902 AD-ID: A370517 More Infos click here
Separation belt saw , ANTHON 2 STÜCK, PREIS PRO STÜCK, , 1 Bandwidth 110mm 2nd Bandwidth 90mm Mechanical feed. IMAGE IN DOC !!!!!!!!!!!!!!! DOCUMENT ON REQUEST MORE PHOTOS BY MAIL! AD-ID: A399780 More Infos click here
Run laminating press , BILDER IM DOC DOKUMENT!!!!! VIELE WEITERE BILDER SENDE ICH GERNE PER E-MAIL ZU!, KOMPLETTE UND GENAUE MASCHINENAUFLISTUNG ODER FILM AUF CD AUF WUNSCH!!!, , solid wood panels complete. About Holt 2005/2007 production consisting of: 1-Optical System TM plant with automatic obligation and Abstapelung. 2-Grama Lamellohobel with automatic circulation system and Abstapelung TM - bison, Angus. 3-Durchlauflaminierungspresse Torwegge automatic 4-Durchlauflaminierungspresse MR machine 5-Schleifstrasse Levigatrici 1300mm below and above 3 per Aggregate 6-automatic packaging plant 7-2 double format saws Rüco [...Technical data truncated] AD-ID: A401517 More Infos click here
4 SIDES PLANING MASCHINE 6 spindle , REX, HOMS 310, , Heavy planing maschine Bj 81, a little run, with introduction and release, heavy, fast, 10 - 60m, with very much accessories, demonstrate ready, plane measure of 310mm x 210mm, EUR 29,500. -- + VAT. AD-ID: A434644 More Infos click here
Bandsaw, , , , horizontal band saw roll diameter 1m stem diameter 1.20 m (1.40 m) 37kw sharpening Vollmer CNH Much sheet saw Tos PKSN32A 30KW BJ 1987, with lasers and approximately 40 mint circular saws and templates make Säumer link older Built fully operational with mechanization and suction and accessories. AD-ID: A457301 More Infos click here
Block band saw kompl. , Primultini, 1400 L, , Band saw left Primultini 1400 * CEI car with 5 Böcken, each individually adjustable, with 5 Stammwender * Computer Type OPTILINE 2002 on the management and handling of the tribes MICROTEC * * video feed hydrostatic type IEC * Vorritz circular saw DPA hydraulic * mechanization VALENTINI with: recovery task - brushes for top and bottom (both sides), saw, - circular saws for side product, -3 patrols, +3 Abwürfe * Schärferei: V [...Technical data truncated] AD-ID: A455708 More Infos click here
Full gate plant , Esterer, HSS71, , HR-REF-1596 Maschinenart: Full-gate facility Manufacturer: Esterer Type: HSS71 Built around: 1970 building mass approximately: - plant is about 30 m long ca.2.20 meters wide - drives are in the basement and ground floor gate accommodated Technical Dates: - Full gate Esterer - hydraulic - complete with clamping cars and auxiliary cars - gap wedge, roller rink - complete Sägeeinhang - Run 720 mm wide / 850 mm high - 4 rolling - rolling pressure adjustable - Druc [...Technical data truncated] AD-ID: A340843 More Infos click here
Besaeum - re-cutting machine , Wurster + Dietz, FR 7, , Make Besäumsäge WD, type FR 7 Bj 1976 drive including a 55 kW and spout Supporters price on request AD-ID: A406958 More Infos click here
Frame Saw with mobile Saw´s, LINCK, U- 71, , Very serious and robust gate line U-71 BV, complete with hydraulic clamping cars furniture, hydr. Gap wedge, complete ONLY 900th --.-- 19 + VAT. AD-ID: A402484 More Infos click here
Separation band saws / tandem band saws , Raimann B4 - Tandembandsaege, , , roller diameter 1100mm roll width: 90mm band saw blade length: 6360mm blade width: 100mm cutting height: 350mm - 420mm feed: 0 - 40 M / min cutting width left of the sheet: 200mm cutting width right of the sheet: 200mm AD-ID: A452244 More Infos click here
SCHRAeNKAUTOMAT , RIVO, OSA, , GATTERSAeGENSCHRAeNKAUTOMAT RIVO. for gate sheet, type OSA Bj 95th dismantled. immediately available. EUR 6 500th - + VAT. AD-ID: A467189 More Infos click here
VIBRORINNE , DIEMER, 15 x 35- 700., , Vibrorinne 7m long, 15 cm highly, 35 cm broad, with own drive, EUR 2,500. -- AD-ID: A443052 More Infos click here
Block belt saw with sharp area , TUYELEC, , , Role diameter 1250 mm, range 180 mm of Spannwagen with 5 supports. Sharp area Vollmer AD-ID: A442553 More Infos click here
Wood professional , , Holzprofi T8060, , Volkswagen diesel engine propelled 1900 ccm, water-cooled, 54kW, number of revolutions 4000 rpm. Daily performance: durchschn.16 FM in 8h, work number of revolutions: 2500 rpm master length: of 1,3m-11,8 m max. Master diameter: 1,3m max. Master dimension: 220x320mm hydraulic feed motion steplessly, hydraulic master clamps, - jacks and - wender AD-ID: A436815 More Infos click here
Gate transportation facility/wood conveyor chain volume , , , , HR-REF-1558 Maschinenart: gate transportation facilities / Wood transport chain band Manufacturer: unknown type: Unknown Built: 50 / 60 mass about it later: L: 30 m B: 1.5 m Technical data: - very heavy, solid construction - iron rolls width 1,200 mm control: on chains Status: barn Fund, but works price: 1,200 - Euro net Location: North Rhine-Westphalia region Verladegerät spot: available from [...Technical data truncated] AD-ID: A335337 More Infos click here
8 ROLLERS 6 ROLLERS GATE, PAUL Doppelsaeumer, , Vollmer, Mueller, Paul, Canali, Brenta., Taifun, CANA-S, HBSG, CNHV, K 2 V, , Saegewerksaufloesung Holland, with Arnheim Well and guenstig. AD-ID: A419456 More Infos click here
To deliver sharpening machines 6 + 8 Wlazen gates , VOLLMER/ MÜLLER/ CANALI7 BRENTA, CANA/ S++ CANA/E++ CNHV++ TAIFUN, , To deliver from dissolution of sawmill remainder machines, Machine list as Woerd document. AD-ID: A423491 More Infos click here
Block belt saw, Brenta, 1100 mm, , Brenta block band saw 1100 mm roles, Block 6 m cars, mechanical stem klemmung, condition good, must be neulackiert AD-ID: A309962 More Infos click here
complete sawmill equipment, Esterer, S 71, , 1 gebr. Roundwood Task 4-leg, with Vereinzelungsstufe 1 gebr. Make full gate Esterer Type S 71 with hydraulic feed, hydraulic cylinders raising electric remote control of clamping gate motor cars from about 25 kW 1 gebr. Quick-brand cars Esterer device with auxiliary driving cars gebr 1. Electrically driven gap wedge 9 is not driven roles with Böcken 1 gebr. Paul Doppelbesäumer type KME, links with execution Spreiss [...Technical data truncated] AD-ID: A468153 More Infos click here
Gate plant , Wurster + Dietz, GDZ 71 Optimat 600, , gate plant year of construction 1982, with hydraulic
sowing spans MILLER - year of construction 1995, spaltkeil propelled,
lateral setting msn., roller conveyors with transverse puller,
sharpening machine VOLLMER CANA/E - year of construction 1981,
sharpening machine VOLLMER CANA/H - year of construction 1988, 1 RH
Aufgabefoerderer 4-straengig, 1 RH sort, 1 RH
Ausrichtkegelrollenfoerderer, 1 master distributor AD-ID: A428203 More Infos click here
gate saw Wurster & Dietz, type GXW 71, cutting width 710 mm
clamping carriage Möhringer, electro-hydraulic
split wedge with electric outfeed roll
double edger W & D, type QB, 700 mm wide, 170 mm heigh
two-side-planer Rex, planning size 630 x 280 mm, year of manufact. 87
clipping saw W & D, type QB
swing clipping saw Böttcher & Gessner
sharpening automat Vollmer, type CnHv for gate saw blades
setting automat Meinert for gate saw blades
crane Demag 0,5 to., 28 m x 2,5 m
surfacing planer Busse
panel saw Altendorf
filter plant Spänex
storage shelfs for panels
price on demand
***************************
Pozycja nr 5043
Kompletne wyposazenie tartaku:
• Trak ramowy W&D typ GXW71, szer 710 mm
• Wozek trakowy Möhringer, elektro-hydrauliczny
• Klin rozszczepiajacy z elektrycznymi walcami pociagowymi
• Obrzynarka dwuwalowa W&D typ QB, szer 700 mm, wys ciecia 170 mm
• Grubosciowka Rex , szer 630 mm, wys 280 mm, rok 87
• Pila kapujaca W&D typ QB
• Pila wahadlowa B&G
• Ostrzarka Vollmer typ CnHv do pil trakowych
• Rozwierarka Meinert do pol trakowych
• Podnosnik Demag 0,5 T, 28 m x 2,5 m
• Wyrowniarka Busse
• Formatowka Altendorf
• Odciag Spänex
Log band saw / Pila blokowa, Schulte, HB 12, stock-no. 4692
Log band saw Schulte
model: HB 12
wheel diameter 1250 mm
throughfeed 1250 mm
saw band width 150 mm, band size 8300 x 150 x 1,20 mm
frame stand
main motor 30 kW
hydraulic infeed
variable forward and backward run speed with one lever operation
incl. electric motor 4 kW, 1500 rpm
clamping carriage mechanic, log claming manual
complete with sharpening and setting machine
price on demand
*****************
pozycja nr 4692
Pila blokowa Schulte
model HB 12
srednica rolek 1250 mm
wymiar pily : 8300 x szer 150 mm x 1,20 mm
szerokosc pily 150 mm
silnik 30 kW
z ostrzarka i rozwierarka pil
wozek trakowy mechaniczny- mocowanie klod manualne
waga 3500 kg, AD-ID: A452039 More Infos click here
Clamping cars , Wurster & Dietz WD, H 28 V, , economy is outdated and very well preserved because of clamping car plant closing. AD-ID: A444162 More Infos click here
Doppelsaeumer , w + D, FR 18, , cutting height approx.. 100 mm - Armament up to 160
mm possible, drive power 2 x 55 KW, feed motion: 2 speeds, 2 x
separation flange up to entirely 350 mm, breitenverstellung -
hydraulic servo cylinder, inclusive kompl mechanization before
Besaeumsaege, cutting, introduction, measurement, inclusive complete
mechanization after Besaeumsaege with dissolving promoter for feed
into a sort promoter, inclusive control AD-ID: A428195 More Infos click here
Nagel rubber / nailing , VANDERLO, 1500/ 27., , Bj 82nd Heavy machine Vanderlo Nagel, 150cm wide, 27 nail injections. (Rods from a broken Rüttelkasten) templates table 150cm x 300 cm. Only 9 800th -- AD-ID: A449941 More Infos click here
Frame-saw, Esterer, 65, , 1971 About Holt and retrofitted on hydraulics, good condition with complete accessories, still in operation, etc. hire Scleifmaschinen passage 65cm. AD-ID: A456805 More Infos click here
complete block belt saw sawmill plant , PRIMULTINI, SIB 1600, , Full PRIMULTINI 1600 block band saws sawmill plant consisting of round wood in heavy task execution Make VALENTINI Built in 1988 roundwood capped with hydr. Circular saw and mass attacks Make VALENTINI, Bauj. 1988 roundwood with 8 sorting boxes and additional task in the hall to block saw band saw Separate roundwood task saw line with Vereinzelungsstufe and hydraulic depositors Längstransport f [...Technical data truncated] AD-ID: A391674 More Infos click here
LINCK full gate , LINCK, U- 71 BV, , Robust heavy full gate LINCK U-71 with hydraulic width adjustment, severe fully clamping cars VS, auxiliary electric cars, starting with hydr. Gap wedge. 800th total EUR 19 -- AD-ID: A467043 More Infos click here
Gang saw work, Linck, , , gate used sawmill Fa.Link Forward 650 mm with 6 boxes 4m, 3.5 m, 3 m, 2.5 m, 2m.und residual wood Several accessories Linck clamping cars Linck block of wood saw Linck Besäum circular saw Linck pendulum saw PP50 role going Qürförderer Schleifraum: Vollmer Schränk full machine AT Vollmer Gatterschärfmaschine type Cana H There are also many gate saw blades. The drain and construction of a sawmill may be a surcharge beautragt The sawmill is only complete [...Technical data truncated] AD-ID: A319180 More Infos click here
Reciprocating saw , Wurster + Dietz, GDZ GE 76 BV, , Make Wurster saw gate and Dietz, type GE GDZ 76 BV Bj 1971, including 600 stroke engine reduction lessons saws and accessories gap wedge with WD Make excerpt driven rollers Seitenwarenkappsäge Make WD, QSW Type 10, built in 1988 Gate roller conveyor length 15 m including Qürabzugsförderer RH task Make WD, 4 AA strands 5,000 mm including depositors back Supporters Make Model WD length about 40 m price on request AD-ID: A406956 More Infos click here
DE PAUW cut plant/double buzz saw , , Quadro Cut, , heavy plant for strong cross sections. Adjustment length of 500 - 8,000 mm. For each page of 2 sawing aggregates up to 45 degrees inclinable, 4 x 11 KW. Cutting height max. 260 mm. Saw blade diameter 700 mm. Schraegfoederer for filling. Length approx. 2,000 mm. Feed motion steplessly max. 40 m/min. Weight 7.2 t AD-ID: A432983 More Infos click here
Spreißeltrenner role-Tour , Spreisselabscheider, , , ca.780mm wide ca.6800mm long with Einstellbaren feed with Anpressrolle AD-ID: A460595 More Infos click here
High performance gate line WD BV , WURSTER& DIETZ, GDZGE- 71., , High performance gate line with hydraulic Spannwagen H 32, Hilfswagen, el. magnetic remote maintenance, WD oscillation framework full gate GDZGE, with hydraulic Breitenverstellung, hydraulic Saegespanner, 600mm stroke, 71cm x 71 cm passage, froe, Vorkappsaege gate role course 12m do not angetieben long. Breits rubber conveyor to coil 22,500 of seitenbrettern, demonstrate ready, EUR. -- AD-ID: A437141 More Infos click here
Band saw plant, Brenta, SBE 150, complet plant, with bandsaw, wood processing, grinding, planning machines air compressor, AD-ID: A436731 More Infos click here
PALLET NAIL PLANTS , BOHM & KRUSE, H- 27/ 1500, , Pallet nail machine B& K, Bj 91.Typ H-1500 27/, very good condition, nail picture control. Width passage 1500mm, with 27 nail supply, 1 pc. with board magazines and block supply from right. for skids. 1. pc. with Kettenduchzug and screwed on templates. For crates and pallets. AD-ID: A377544 More Infos click here
Sort car , Baljer u. Zembrod, EP / 26 H - L 109, , sort car Fabr. Baljer and Zembrod, type EP/26 H
- L 109 Bj. 1982 trace 3,000 mm, crane Asterix operation hours 22,000
buzz saw on the left of price on request AD-ID: A430852 More Infos click here
Gate plant/re-cutting gate plant , Wurster & Dietz, Optimat GDZ 600, , HR-REF-1917 Kind of machine: Gate plant/re-cutting gate plant manufacturer: Wurster & Dietz type: Optimat GDZ 600 Year of construction: 1973 - 1987 Technical data: Cut measure: - max. yards 560 mm - max. width 710 mm Vorschubwagen: - Brown WEA year of construction 1987 Froe with cutting saw: - Brown SPE year of construction 1987 - froe particularly to the cut of short - and Blockware - excerpt rollers are operated electrically and hydraulically The plant consists of: - Gates - Vorschubwagen - froe with cutting saw - task - Vorkappsaege - role course - Hilfswagen Condition: immediately operationally Price: 39.800, - euros net Location: North-Rhine/Westphalia Availability off: immediately Shipping equipment locally: must be organized Dismantling, loading and transport are task of the buyer. The trading firm Ravensberg organizes if necessary gladly the loading/transport of the commodity. The trading firm Ravensberg is a broker and not owner of the offered commodity. We point out expressly that the trading firm Ravensberg furnishes only switching achievements that is not called even contracting parties of the buyer becomes. All information is based on the data of the owner. Mistakes remain reserving. AD-ID: A385112 More Infos click here
HACKER RESTHOLZENTSORGUNG , KLÖCKNER, 100- 400., , hackers dismantled, Kloeckner 100 x 400mm, ran after screening unit, little benutzt.demontiert ONLY 2 000-EUR AD-ID: A446887 More Infos click here
Remote controlled spannwagen , Wurster + Dietz, H 38, , Ferngesteürter clamping cars Wurster + Dietz, Type H 38 Bj 1992 track width 1.250,00 mm cutting length of 17.0 m driving speed to 24 m / min weight of 3.5 tonnes, including control and hydraulic unit price on request AD-ID: A406957 More Infos click here
Ingot chariot , LBL, FL, , ingot chariot Fabr. LBL, type flat steel
bar Bj. 1994 4 Stk. Spannboecke inclusive. 4 Stk. Flipperarme for
master turn max. Claw opening 1,200 mm of trace 1,600 mm of max. Wood
length 8,000 mm price on request AD-ID: A430872 More Infos click here
Belt saw work completely AKE , , , , 1.AKE roundwood funders place to work 2.AKE roundwood Sponsors for cars 3.AKE gesteürte band saw investment 4.AKE band saw 5.Sortierbänder 6.Besäumsäge 7.Hacker 75 KW 8.Pneumatischer transport from the silo to hackers sawmill is in operation and absolutely in order. Can be viewed and demonstrated. In this operation, BOOK AND OAK SAWN PRODUCES. PICTURES IN DOCUMENT DOC !!!!!!!!!!!!!!!!!!!!!! AD-ID: A399695 More Infos click here
Spaneranlage , Kockum , 3 spralig , , Kockum Spaneranlage with cyclic testing task of round timber with sort many sheet saw W& D Fr.10 160 mm of cutting height At the Aufstelung 2004 examined and overhauls new elktrik pictures of the plant can you by email receive. AD-ID: A372260 More Infos click here
HEBEBUeHNEN sCHEERENHUBTISCH LIFT , POWER LIFT, 2- to + 4 to, , Hydr ausgangshöhe 0.30 autolifts Ausgefahren m to 1.30 m 2. and 4 to table size 1.00 x 3.20 hydraulically with foot switch steürbar, Bj 95 + 96th Pro 900th St. 2 --.-- $ 5 decrease in total 500, - $ AD-ID: A455405 More Infos click here
Wood impregnation plant/soaking plant/dipping basin , Wichmann, Doppelwand, , HR-REF-1900 kind of machine: Wood impregnation plant/soaking plant/dipping basin Manufacturer: Wichmann Type: Double wall Mass approx.: L (mm): 6,500 B (mm): 1,350 H (mm): 1.500 Technical data: - Double tub mass 7m x 2.2 m - hydraulic sinking - compressor rod - 3,000 kg of carrying capacity - elektr. Temperature price increase - dip - and catch pan from steel - lacquer finish green - switchgear cabinet according to VDE Condition: - immediately operationally Price: 4.200, 00, - euro net Location: North-Rhine/Westphalia Availability off: immediately Shipping equipment locally: available Dismantling, loading and transport are task of the buyer. The trading firm Ravensberg organizes if necessary gladly the loading/transport of the commodity. The trading firm Ravensberg is a broker and not owner of the offered commodity. We point out expressly that the trading firm Ravensberg furnishes only switching achievements that is not called even contracting parties of the Kaeufers becomes. All information is based on the data of the owner. Mistakes remain reserving. AD-ID: A382952 More Infos click here
N E V A , Duennschnittgatter, TR 88 / A, , Machine overhauls completely. Passage: 200 x 150 mm wide. Number of revolutions 400 UpM. Hauptmotor 11 KW. Completely with necessary accessories AD-ID: A440431 More Infos click here
SAB Spaner , , PSP 500, , Zerspanerbreite 80 - 300 mm, 52 per disc knife tools, saw 1 each segment. Hydraulic Spanersprung. Max feed. 45 m / min. Drive 2 x 55 kW AD-ID: A446277 More Infos click here
Resaw, STENNER, VHM 36, Saw blade width max mm 100; Roller diameter mm 915; Thickness max mm 406; Opening width mm 230; Number of feeder rollers 6; Table tiltable ° 45; Vertical saw blades 1; Total connection kW 15; Weight kg 1.890; Feed max m/min 45; Diagonal cut Yes; Slab cut Yes; Table tilting manual Yes; Technical typ, AD-ID: A391119 More Infos click here
Spreielabscheider , MÖHRINGER, , , 1-lamellig, fr 6 m board product, fixed blade left, Spreissel the right and left off, Brett is about growing chain excavated AD-ID: A437896 More Infos click here
Round timber sort car , Baljer & Zembrod B & J, , , HR-REF-1871 kind of machine: Round timber sort car manufacturer: Baljer & Zembrod B & Z cutting SAE: Stihl + exhaust discharge: 13 m piston force: 1,000 kg crane: Fiskars control: left-sided track width: 2.6 m of tracks: 36 m condition: price basicoverhauls 1994 employment-broadly: 18.000, - euros net location: Region Hessen Availability off: dismantling, loading and transport are immediately task of the buyer. The trading firm Ravensberg organizes if necessary gladly the loading/transport of the commodity. The trading firm Ravensberg is a broker and not owner of the offered commodity. We point out expressly that the trading firm Ravensberg furnishes only switching achievements that is not called even contracting parties of the buyer becomes. All information is based on the data of the owner. Mistakes remain reserving. AD-ID: A378141 More Infos click here
Stake pointer/post-younger , Festo, AFF -TF, , HR-REF-1902 Kind of machine: Stake pointer/post-younger Manufacturer: FESTO Type: AFF - TF Year of construction: 1996 Mass approx.: L (mm): 2,100 B (mm): 1,500 H (mm): 1.000 Technical data: Special machine for the taper ratio of posts and stakes - 2 Saegeaggregate - several Saegeblaetter per socket - pneumatic control Condition: - immediately operationally Price: 1.300, 00, - euro net Location: North-Rhine/Westphalia Availability off: immediately Shipping equipment locally: available Dismantling, loading and transport are task of the buyer. The trading firm Ravensberg organizes if necessary gladly the loading/transport of the commodity. The trading firm Ravensberg is a broker and not owner of the offered commodity. We point out expressly that the trading firm Ravensberg furnishes only switching achievements that is not called even contracting parties of the buyer becomes. All information is based on the data of the owner. Mistakes remain reserving. AD-ID: A382957 More Infos click here
4 sheets building timber circular saw , Schuhmacher, 35 / 4, , 4 sheets building timber circular saw Fabr. Shoemaker, type 35/4 Bj. 1980 drive for each engine 18.5 KW of inclusive and excerpt promoters Price on request AD-ID: A440388 More Infos click here
DUeNNSCHNITTGATTER , WINTERSTEIGER WINTERSTEIGER, DSG 150 ECO, , Gladly we offer a thin section gate of the manufacturer WINTER RISER of the type to you. DSG 150 Eco on. Year of construction 1997 complete with mechanization on the left and on the right the gate (role courses) with shears elevating platform with sharpening machine to the gate the surface quality is after sawing, nearly as planed and permits thereby the lamellas immediately glue to be able without again a plane procedure would drive through to muessen. See data sheet. Available IMMEDIATELY - developed! Sale of the gate starting from location as visited without guarantee and warranty in and-installed condition. Payment completely immediately on receipt of the invoice without departure by transfer. Disassembly only after complete receipt of payment possible. Completely 49,000 euros net zzgl. VAT Yours sincerely Thomas Brouwers AD-ID: A408616 More Infos click here
Hew-saw, Veisto-Rakkane, R 200, Complete sawmill with R200,log sorting line,boardsortingline,heating central.a.s.o., AD-ID: A438611 More Infos click here
RH task + block promoters , Haas, -, , task of round timber of Fabr.
Haas 4 - strands AA 7,000 mm of sort + depositor block promoter length
approx. 24 m to the right eject AD-ID: A429292 More Infos click here
Skid Steer , ÖHLER, 950, , OeHLER compact loaders, maneuverable, down to tidy up where big vehicles can not be ONLY 2 900. - + VAT. AD-ID: A455412 More Infos click here
DUeNNSCHNITTGATTER , WINTERSTEIGER WINTERSTEIGER, DSG 150 ECO, , WINTERSTEIGER Dünnschnittgatter complete with mechanization, Scherenhubtisch, sharpening of winter climbers,. Available Immediately! Built 1997 Good Condition cultivated cutting width 150, cutting height 210 mm. AD-ID: A449281 More Infos click here
Sawmill capacity 30,000 m /Jahr per layer , Mehr Bilder gerne per Mail!, , , the plant is
developed from the 1980 to 1985, capacity is about. 30,000 m3 year/pro
layer. Round timber working on length: 3,0,6.9 m on main line max.
Diameter is 400 mm behind root reduction. On a separate older saw
round timber can be worked on with length to 11 m, and dia. meter up
to 550 -600 mm. The plant is developed mentioned with the following
parts as expiration of line. 1. Raw wood transverse volume 10 + 2 m
for round timber 2. Receipt trace with chain saw for roots 3. Round
timber conveyor 4. Rema fair-rams 5. Round timber foederband with
slidegate valve 6. Transverse mechanization for single round timber 7.
Receipt trace 8. Abkurzsaege 9. Fairs line with firm stop per. 0.3 m
of 3,0 biz 8.4 m, with slidegate valve of right and left in box. 10.
Crane Palfinger E10-98E with leader house 11. Transverse mechanization
with more underbringer 12. Round timber transporter 13. Root
Reduzierer, Bruks RR 700 LTLT 14.Vorfuehrer with el-podier Rema system 270 with chair 15. Round timber
mechanization after sawmills 16. Cattle customer Valon Kone VK 26MX
with volume 17. Cattle volume 18. Round timber mechanization runway
with slidegate valve of right on the left of 19. Transverse volume 20.
JAJOD Dopp. Saw type. D210 with import 21. Separator for pieces of
crust and block, also on the left of slidegate valves 22. JAJOD D14
separation saw for block with import 23. Runway with transverse volume
on the left of 24. JAJOD saw with import and conveyor for Gegenlauf
25. Runway with assortment of the pieces of crust of 26. JAJOD saw for
separation block the 27. Runway for finished wood 28. Cross transport
of crusts of pos. 20 and 24 29. Import for edge saw 30. JAJOD edge saw
for pieces of crust 31. Serrating racer import after column saw 32.
JAJOD column saw for boards 33. Transporter for boards 34. Transverse
volume for waste of the column saw 35. Transverse volume for boards of
the edge saw 36. Insert volume to the Schredder (2Teilig) 37.Bruks 1701 M Schredder m. 110 KW engine cyklon and BS3 filter 38.
Splinter volume to the camp 39. Transverse volume for long wood trunks
of pos. 18 40. Blockfoederband for pos. 41 41. Saw for is enough and
for large wood coming 42. Transverse volume for finished wood of pos.
41 43. Transverse volume for assortment of the sawing wood with
several cars 44. Compressor plant with 2 ea.. FF Kompressorer cooling
dryer and container 45. Sharpening area: Rolling aggregate placing
aggregate Vollmer CANA E Schleimaschine ERMA grinding machine div.
Handicraft things circular saws etc.. 46. Exhaust plant for saegemehl
47. El cabinet and control with operator consoles measure attitude
system etc.. The plant is to be visited in not far from Germany to. AD-ID: A429733 More Infos click here
Planing maschine 4 - Seiter 250mm x 605 mm , KUPFERMÜHLE, VUIN- PLUS // KONSTANTTISCH // GANZ WENIG GELAUFEN, , VERY MUCH SCHOeNE copper mill VUIN PLUS Bj. 91. however completely little uses, 4 spindle, plane measure of 250 x 605mm, feed motion 5-30m/min. Konstantisch role course extendable on 7m in front and in the back, digital measure input, strengthened engines. Demonstrate-ready immediately available. EUR 29,800. -- + VAT. AD-ID: A443028 More Infos click here
wood pellets production plant, Wiesmann, , Complete wood pellets production plant, 1997, stopped end of 2007, capacity 100 - 120 ton/24 h, 2000- 2200 tons/month, 25.000- 30.000 tons per year, 2 personal,packing installation bags and big bags. Drying installation Wiesmann. Heated by pellets. Pettet press installation CPM, not dismanteled, as is where is , AD-ID: A430909 More Infos click here
Slat bundle plant , H I T, Modell LBH, , Plant to the Buendeln of slats and frameworks. Wood lengths of 2,5 - 6 m, package mass max.: Width 150 mm, height 200 mm. , Buendeln with Zyklop machine with plastic Baender lengthens caps. Destacking on lifting platform AD-ID: A432495 More Infos click here
Dipping impraegnieranlage , M E B A, , , Package length max. 12.5 m, 1.25 x 1.5 m highly. Wood edition 6.5 M. piston force 8 t. Plant with catch pan. AD-ID: A432504 More Infos click here
Sawmill completely , Pini & Kay, Lindner, , , Gang saw work completely: Gate Pini & Kay, type FN 65, engine 45 KW of Spannwagen gydraulisch, froe Besaeumer Lindner, type D885014, Lattenbueckse Haker Lindner with metal-searchferment, Mechanization sharp area AD-ID: A442557 More Infos click here
Belt saw rolling table , Primultini , BC, , Belt saw rolling table Fabr. Primultini, type BC Bj. 1996 for sheet widths up to 260 mm Price on request AD-ID: A440190 More Infos click here
Logbandsaw/ Pila blokowa /Scie à grumes, Nobis, , stock-no. 5337
Logbandsaw Nobis
diagonal version
saw wheel diameter 1200 mm
max. log diameter 1000 mm
log holder 8 m long
motor 18,5 kW
saw runs on rails
infeed Böhringer approx. 40 m/min.
complete with sharpening machine Vollmer
and setting machine Meinert
weight: 5000 kg
price on demand
****************
Pozycja nr 5337
Pila blokowa NOBIS
Srednica rolek 1200 mm
Max. srednica klody 1000 mm
Prowadzenie przekatne Chwytak klod o dlugosci 8 m
Silnik 18,5 kW
Pila porusza sie na szynach
Posuw ok 40 m/min
W komplecie ostrzarka pil do pil trakowych Vollmer
Oraz aparat szerenkujacy Meinert
*****************
Scie à grumes Nobis
Version diagonale,
Diamètre des volants 1200 mm,
Diamètre du tronc max. 1000 mm,
Puissance moteur 18,5 kW,
Mobile sur rails,
Entraîneur BÖHRINGER, environ 40 m/min,
Avec affûteuse VOLLMER,
Avec machine d`avoyer MEINERT,
BROWN CANALI Doppelwellen Nachschnittsaege , , Typ DK 1, , working width 400 mm, cutting height 210 mm. Drive 2 x 55 kW. Chain-bed basin. Max feed. 30 m / min. Hydraulic height adjustment. Collection and Pointing roller track with centering, length 6000 mm, width 600 mm. Facility complete with cabinet hydraulics. Run until 1998. Since a standstill. Plant design and vorführbereit AD-ID: A442791 More Infos click here
Lumber circular saw , SCHUHMACHER, KDK 2, , lumber circular saw shoe maker, with Vereinzelungsförderer, chain catchment 7m, lumber circular saw 2 x 22 kw, cutting height 300mm, with roller conveyor output at about 8m long, with Spiralrollenabwurf. Only 6 total 900th - EUR. AD-ID: A446187 More Infos click here
HALLENKRAN , DEMAG, , , NEUWERTIGE MECHANIZATION FUeR KLEINSAeGEWERK, indoor crane Demag, 1 to load capacity, 20 m long, 7.25 m qür and electric drive along with 2 speeds, with adjustable pallet fork, 2 Hubgeschwindigkeiten. Vorführbereit from the site. EUR 4 900th - + VAT. AD-ID: A465965 More Infos click here
RUDNICK + ENNERS hackers plant , , TH 200/650/3, , Forward width 650 mm, passage height 200 mm, rotor diameter 600 mm, the main engine 55 kW. Catchment 30/40 m / min. Vibro-Föderer length of 17 m with screening device, metal detector, 2 Screening plant after shredder, wood chips-Kratzföderer. Performance from 15 to 22 m / h Installation of small sawmill AD-ID: A451490 More Infos click here
WURSTER DIETZ & FR 18 Besäumatomat , , , , 3 to 5 stielig, 2 x sheet flange, 2 x separation flange, Camera surveying, main engines 4 x 55 kW, feed max. 180 m / min., Duchlaufkappung, centering in the catchment before FR 18, in the exit separation role Sortierwerk for 2 Haupterzeunisse for product page 6 Abwurfplätze AD-ID: A454491 More Infos click here
Double separation band saw , , Stenner Type: VHT 105, , With catchment Transporter Weinig, excerpt roll pass with 3 pieces Abewiser pneumatic gesteürt including light barriers AD-ID: A455499 More Infos click here
TROCKENKAMMER IPPC FAeHIG , NARDI 16m LANG, 16 X 4 x 4, , Bj 94th Drying chamber Nardi, 16m long, 3 packets high 3 packages deep, in the meantime ventilatoren ceiling 9 x 2.2 kw, the latest Computersteürung for all types of wood, IPPC expression total EUR 25 000 - + VAT. AD-ID: A459236 More Infos click here
Resaw, RAIMANN, B 110S, Saw blade width max mm: 110; Roller diameter mm: 1.100; Thickness max mm: 200; Opening width mm: 400; Number of feeder rollers: 4; Rotation speed of the wheels rpm: 580; Main motor kW: 22; Feed max m/min: 40; Stepless adjustable feed: Yes; Technical type: Single machine; Saw blade: Vertical; Feed r, AD-ID: A462762 More Infos click here
