Exhausting shavings container , MANNSCHOTT, A.S.K. Mulde DL, , 1 used EXHAUSTION - Chips - CONTAINER man from Schott, a capacity of 15 cubic meters, built in 1997, top condition, primed, festverschweisstes roof, 1 slant with lid, rubber gasket, 4 x Exzenterverschlüsse, 3 tlg.Kipplager, Befüllstutzen, 2 Berstdrucksicherungen on the roof, ring line than extinguishing system in the tank, C - hose outside, forklift pockets under the soil, ground 5 mm steel walls 3 mm Stahlblech.SOFORT available from site visits as o [...Technical data truncated] AD-ID: A476540 More Infos click here
Scantling gathering plant , Baljer & Zembrod mit 5 ACHSEN, HBZ, , Very well cared Abbundanlage of BALJER & ZEMBROD, built in 1995, total length of 39 m facility, 4 clamping cars, 8 tool stations, the system can be software such as setting all Blockhauseckverbindung finished Schwalbenschwanzfräsungen etc., suitable for plant engineering SAeMTLICHE timber connections and, of course, for all common carpentry Relationship , Max Einspannbreite possible until about 1000 mm in width and about 400 mm in height. Including plant will SE [...Technical data truncated] AD-ID: A375522 More Infos click here
Scantling gathering plant , HUNDEGGER HUNDEGGER, , , Hundegger K2 with full equipment type 450 Bj. 2000 available approx. August/Sept 08 AD-ID: A443151 More Infos click here
Abbundanlage K.1 without Hobelstation. , HUNDEGGER - HUNDEGGER, K1, , DOG EGGER ABA type K1 - Equipment! Construction year 1997, 1 marking, 1 slot machine, 2 drill rigs, vollautom. Balkenende turning station, with all existing editing tools on the site as Anlage.Verkauf from visiting without warranty and Garantie.Anlage up vorführbereit, very little went, gardened good condition. Price ex location without disassembly, loading, transportation and rebuilding again. He immediately after payment [...Technical data truncated] AD-ID: A467125 More Infos click here
Carpentry - Abbundanlage , Fezer, ABS 600, , HR-REF-2247 Maschinenart: carpentry - Abbundanlage Manufacturer: Fezer Type: ABS 600 Built: 1981 mass approximately: L (mm): 25,000 B (mm): 2,300 H (mm): 2,250 - Investment consists of 5 units with roller rink - suitable for Abkürz, Gehrungs, flat and unilateral Schifterschnitte, Kerven and Zapfenfräsungen - the total length of the plant about 25 meters - a roller track width 700 mm 2 x FEZER type ABS 600 R - three-phase 380/660 V, [...Technical data truncated] AD-ID: A463471 More Infos click here
Carpentry scantling gathering machine , SCHNEIDER, SH A1, , high speed carpentry
scantling gathering machine cutting to length circular saw:
Three-phase alternating current brake motor - 380 V/50 cycles per
second/5.5 KW/1500 Upm saw blade admission - diameter 40 mm saw blade
- max. diameter 800 mm of cutting height - approx.. 270 mm with 90 and
saw blade diameter 800 mm swivelling range - from + 60 to - 45 lateral
setting - approx.. 250 mm of suction nozzles - diameter 100 m cut
circular saw: Three-phase alternating current brake motor - 380 V/50
cycles per second/6.4 KW/7.8 KW/pole-changing/1440 and 2900 Upm saw
blade admission - diameter 40 mm saw blade - max. diameter 650 mm of
cutting depth - 245 mm with saw blade diameter 650 mm of spindle
length - 150 mm swivelling range - from 0 to max. 45 vertical
adjustment - approx.. 100 mm of suction nozzles - diameter 120 mm of
setting off circular saw: 2 three-phase alternating current brake
motors - 380 V/50 cycles per second/3.0 KW/3000 Upm saw blade
admission - diameter 30 mm saw blade - max.Diameter 350 mm of cutting depth - ever 120 mm with saw blade diameter
350 mm swivelling range - from -30 to + 30 pin length - max. 165 mm of
suction nozzles - diameter 50 mm rolltisch: Bearing surface - 2050 x
700 mm, extendable on 3000 mm swivelling range - from + 60 to - 60 AD-ID: A437042 More Infos click here
Universal scantling gathering circular saw, Gjerde, 2003, , carpentry-Abbundkreissäge Universalabbundkreissäge GJERDE SOEC The original in the rotation. In Germany for years thousand times over. The saw with the wide range of applications cutting height: 200 mm at 90 degrees 135 mm at 45 degrees, Engine: 7.5 kW 400 V, section width up to 930 mm, 135 degrees rotatable hub blade swiveled 45 degrees blade d = 550 mm with sliding table roll right with Aluminum-length stop with 3.00 m ruler u [...Technical data truncated] AD-ID: A239536 More Infos click here
Industrial compressor , BIRKENSTOCK 2000 - 750 -380, Doppelkolbenkompressor , , Very cultivated compressor from Birkenstock, power connection, 750l Kessel.Von Birkenstock new waited. IMMEDIATELY free. 15 bar pressure, very well suited for a Abbundanlage, carpentry, locksmith, etc. AD-ID: A404439 More Infos click here
Abbundanlage , Hundegger, P 8, , sub-swivel table kappsöge Balkenwender automatic Klotzabschieber rafter nail drill Kerven spigot with the right trencher u.linkslauf Ueberblattungs spigot with the right trencher u.linkslauf marking 2xBohrer 3xStemmer AD-ID: A453445 More Infos click here
Scantling gathering plant , Hundegger, P 10, , CNC scantling gathering plant Hundegger P10 Austattungsmerkmale: 1.Saegeaggregat 2.Kervenfraese 3.Markiergeraet in the back, down, in front 4.Blattfraese 5.Bohrgeraete, down and in the back 6.Kettenstemmer down, in the back and above 7.Fingerfraeser 8.Vertikalfraese 9.Stellbrettfraese 10. block separator of accessories to the scantling gathering plant: 1.Vollautomatische exhaust with single aggregate control 2.Spaenebunker with briquette press 3.Kompressor 4.Kuehlgeraet AD-ID: A432932 More Infos click here
Scantling gathering plant , FESTO, ASF, , consisting of: Asleger saw and milling
machine ASF with scantling gathering course SM with two machine units
technical data: Stroke of the aggregate 800 mm of vertical adjustment
300 mm work width with max. Cut depth 450 mm of engine performance 5.5
KW of engine speed 2800 U/min aggregate tiltable 90 re/90 left weight
approx.. 600 kg of saw blade diameters 550 mm of sawing wave diameters
(special flange) 30 mm of cut depth max. (aggregate horizontally) 200
mm of milling tool diameters max. 340 mm of milling wave diameters 40
mm friction length max. 200 mm of Zerspanquerschnitt with soft wood
max. approx.. 60 cm for shortening, Besaeumen, slots, for
Ausplattungen and rafter head cut, Schiften -, taps -, Kerven and
mitre cuts, forming AD-ID: A437031 More Infos click here
Zapfenschneidmaschine Krüsi ZA 66 , Kruesi , ZA 66, , processing / cones cutting machine from Krüse fully functioning in good condition. Space 360x170x135 cm Weight 1050 kg Ablängsäge 750mm diameter 3 kw motor, swivel 60 degrees. Einschnittsäge 450mm diameter 3.7 kW motor swivel up to 45 degrees. Absetzsäge 350mm diameter 2 engines ever. 1.5 kW motors. Sliding table edition extendable to 160 cm AD-ID: A455065 More Infos click here
Wall and ceiling manufacturing plant , KAUFMANN, Kaufmann WD Anlage, , Full wall and ceiling manufacturing plant for the production of finished walls and ceiling elements, with shot-bracket and screws. Wall sizes of about 2.50 x 6 m Built in 2003 / 2004. Already dismantled. Immediately available. AD-ID: A451270 More Infos click here
Abbundanlage , Hundegger, P 10/ABM - B, , P Abbundmaschine HUNDEGGER type 10 / ABM - B Aufgabeqürforderer left, amx 12 m record, 90-degree turn, Mass. crop, table Schwenkkappsäge 700 mm, 1 x core cutters, 1 x leaf cutters, horizontal drilling units, 1 x vertical drilling unit , 2 x Kettenstemmer, 1 x vertical milling, 1 x finger cutters, Stellbrettfräse for slots, tax Qürförderer, 1 x Vierseitenhobel mantel with HM Type C, Egger dog Bj 95, ZENO hackers wood chips conveyors, length 2 [...Technical data truncated] AD-ID: A458704 More Infos click here
Scantling gathering machine , Mafell, ABA, , carpentry processing with roller tables 4m, Kappa able to swivel / tilt, with digital displays, pneum. Fixtures, machinery was never used and was only used for demonstrations! Neupreis 1993 approximately $ 26000.00 AD-ID: A422380 More Infos click here
Scantling gathering plant , HUNDEGGER P10 P10P10, , , 1 spent DOG EGGER processing type P.10 was only about 4 to 5 hours a day in use. with the following equipment: 5-leg Aufgabeqürförderer Untertischschwenkkappsäge Automatic Klotzabschieber Kerven cutter cones Ueberblattungs cones Kettenstämmer trencher 2 - up, down 1 slot aggregate horizontally from the rear Fully Fräskettenschmierung 2 x vertical drill horizontal 1 x drill Universalfräsaggregat alternate board cutter [...Technical data truncated] AD-ID: A414905 More Infos click here
Scantling gathering plant , HUNDEGGER P10 Vollausstattung inkl. Fingerfraese ohne HM, , , 1 spent DOG EGGER processing type P.10 with the following equipment: equipment can be presented! 5-leg table Aufgabeqürförderer sub-Schwenkkappsäge Kervenzapfenfräse Ueberblattungszapfenfräse 1 vertical-1 Horizontal drill-drill 2 vertical chain Stemmer 1 horizontal chain Stemmer Fully Fräskettenschmierung rafter nail drill 2 marking retrofits in 1997 Fully automatic bar turning [...Technical data truncated] AD-ID: A443148 More Infos click here
Universal Abbund circular saw , Ernex/Gjerde, Gjerde 2003 S, , carpentry-Abbundkreissäge Universalabbundkreissäge Auftrennsäge, Ablängsäge GJERDE 2003 S is the saw with the basis for postponing the cut Ready adjustment. This can be either solid roller tracks used. The attack of the roller track will have a hand at the terminal blocks. This saves the running back and forth to the attack on the Kappmass. The Mass is to read a digital display. The attack is top [...Technical data truncated] AD-ID: A462997 More Infos click here
BAUHOLZ - Hobelanlage HUNDEGGER - HUNDEG , HUNDEGGER, HMC, , Technical Data: The leading facility for planing lumber. Fully automatic, without any conversion of Qürschnittmasse. Machine Description: DOG EGGER 4 page planing machine type HMC original text excerpt from the sale of the company documents dog Egger, excluding any warranty. Year built 1994 Four pages of Appendix slicer lumber DOG EGGER type HMC soundproofing execution 4 individual floating Anfaseaggregate each with about 1.5 KW [...Technical data truncated] AD-ID: A467126 More Infos click here
Krüsi Chaletbaumaschine CM 40-NC, Kruesi, CM 40-NC, , Krüsi Chaletbaumaschine CM 40-NC assly. NC gesteürter manufacturing machine, cpl. Software / single rod program, Make IT with industrial PC Dart's transfer from a CAD / Abbundprogramm, following completion: horizontal and vertical Fräsagregate with automatic work cycle and hydro-pneumatic feed, pneumatic piece voltage * NC Positionierrollentisch 15 meters long and manufacturing length [...Technical data truncated] AD-ID: A470761 More Infos click here
