Used machinery offers: Wood working machinery
> Window production machines
(text-only version)
Subject to alterations and error in the technical details, statements and pricing! All offers are not-binding and without obligation.
Available subcats in the main cat Wood working machinery:
Processing machines
Drilling machines
Lathes
Barkers
Conveying machinery
Milling
Heating
Planers
Edge bending machines
Combined machines
Compressors
Lacquering
Dust Extraction
Presses
Saws
Sawmills
Sharpening machines
Sanders
Mortisers
Drying
Carpentry machines
Joinery machines
Window production machines
Veneer fabrication
Wood shredder
Glue coating machines
Dust extraction
Postforming machines
Brushing machines
Double end tenoner
Destacking device
Finest planers
Chip tray production
Pallet production
Turnery machinery
Finger jointing lines
Lapping machines
Improvement machinery
Staplers & nailers
Coating machines
Door manufacturing machinery
Feed apparatus
Other machinery
Notices & aids
Cutting machines
Structuring machines
Zurichtmaschinen
Kehlmaschinen
Operating manuals
Glass border saw , Striefler, , , 90 neumatische Spanner for aluminum u plastics
AD-ID: A418037
More Infos click here
___________________________________________________________________________________
Flow coating line, HÖCHSMANN, FLU BD, Number of kilns: 1; Lacquer circulating volume min l: 40; Viscosity max s: 20; Compressed air pressure bar: 6; Total connection kW: 0,75; Mobile nozzles: Yes; CE-mark: Yes; Ex price aprx. EURO: 23.990,00; ,
AD-ID: A426778
More Infos click here
___________________________________________________________________________________
Tenoning and slotting machine/Czopiarka jednostron, Festo, ZA 101, stock-no. 5374
Tenoning and slotting machine Festo
type: ZA 101
saw 1,85 kW
router top 2,3 kW
router bottom 2,3 kW
slotting spindle 4,4 kW tiltable
sliding table
weight: 800 kg
price on demand
****************
Pozycja Nr.5374
Czopiarka jednostronna Festo
Typ ZA 101
Pila 1,85 kW
Frez gora/dol po 2,3 kW
Wrzeciono czopujace 4,4 kW, wychylne
Wozek do czopowania
Ciezar 800 kg
***************
No. de stock: 5374
Festo
Type : ZA 101
Scie 1,85 kW,
Arbre à profilé dessus et dessous, chaque de 2,3 kW,
Broche à rainure 4,4 kW, pivotante,
Chariot,
Poids : 800 kg ,
Prix sur demande,
AD-ID: A457299
More Infos click here
___________________________________________________________________________________
1421 Outside profiling machine, Weinig, Univar 6, # 1421 outside profiling machine for sashes Weinig Univar 6
Betriebsspannung: 380 Volt, 50 Perioden.
Aggregates:
1. clockwise running spindle right, pneumatically clocked
2. profiling spindle right
3. fitting spindle
Technical details:
1st spindle: clockwise running spindle - number of tools: 1
- 6000 rpm
- spindle diameter: 50 mm
- usable length: 120 mm
- engine: 7,5 kW
Feeder
- feed prifling unit:variable 6 - 12 m/min
- feed roller distance: 120 mm
- feed roller width: 50 mm
- feed roller diamter: 95 mm
2nd spindle, prifling spindle::
- number of tools:3
-spidnle stroke vertical: 2 x 95 mm
choosable:
- number of tools: 4
- spindle stroke:: 4 x 80 mm
- 6000 rpm
- spindle diameter: 50 mm
- usable length: 320 mm
- engine:11 kW , feed 1,1 KW - feed profiling unit: variable 6 - 12 m/min
Special equipment:
Sicherheitshaube gemäß EG-Masch. Richtlinien
3 mechanical spindle brakes for all spindles 1 fitting unit aggregat right rechts: zum Einfräsen der Beschlagnute im Umfräsgang bzw. zum Nuten im Längsprofil.
- engine 3 KW - 6000 rpm
- spindle diamter: 40 mm
- usable length: 160 mm
- axial stroke 80 mm for 3 tools
- monitor control for 99 window types
- outside profiling package for small sashes
7 hochtaktbare Walzen im Einlauf und 5 im Auslauf zur Verkürzung der Durchlaufzeit beim Umfräsen
Umfräseinrichtung für schmale Flügel, Flügel werden auf Vorrichtung gespannt und auf einer Fundführung parallel zum Fräsanschlag geführt (diese Einrichtung ist geeignet für eine minimale Holzhöhe von 65 mm)
Tischplatten aus Hartgewebe anstelle der Stahltische; für Werkstücke mit geschliffener Oberfläche.
(technical details according to manufactuerer - without guarantee!),
AD-ID: A267272
More Infos click here
___________________________________________________________________________________
5234 Vierseitenhobelmaschine , GUBISCH , BS 230 - 2 , # 5234 Gubisch BS 230-2
Technical details summary
(please ask for possibly more included equpment)
In general
> working width: 230 mm
> working height: 140 mm
> number of spindles: 6 Stk.
> planning table 1950 mm
> feed motor: 2,2 kW
Spindle arrangement
......................................................................................................................................
> spindle 1: bottom
> spindle 2: right
> spindle 3: left
> spindle 4: right
> spindle 5: top
> spindle 6: universal
Spindle description
......................................................................................................................................
> spindle 1: 5,5 kW, 6000 rpm, 40 mm diameter
> spindle 2: 4 kW, 6000 rpm, 40 mm diameter
> spindle 3: 5,5 kW, 6000 rpm, 40 mm diameter
> spindle 4: 5,5 kW, 6000 rpm, 40 mm diameter
> spindle 5: 5,5 kW, 6000 rpm, 40 mm diameter
> spindle 6: 5,5 kW, 6000 rpm, 40 mm diameter
More features
......................................................................................................................................
> cardan drive
> possible to divide out of glazing bead ,
AD-ID: A463556
More Infos click here
___________________________________________________________________________________
Tap cutter, Canali, (17056), , uses, make Canali, year of construction unknown, 5
engines, 4 spindles, buzz saw, 2 lying spindles, 2 standing spindles,
table inclinable, production part tension manually, weight approx..
1500 kg, all data by reservation. Stock location 97447 Gerolzhofen
AD-ID: A296498
More Infos click here
___________________________________________________________________________________
Narrow belt sander, Blaettler, BSM 2000 WIN, - 2 aggregates
- sanding width max. 200 mm
- sanding thickness 15 - 125 mm
- sanding length 300 - 6000 mm,
AD-ID: A321449
More Infos click here
___________________________________________________________________________________
Window production plant, SCM, System 1, , Four-side planes, hydraulic finery planes, tapping and treatment of slots, boring, glass retaining strip mitre, Fraesungen+Bohrungen for fitting parts, profile milling at 4 sides, marking of the workpieces CNC control
AD-ID: A216584
More Infos click here
___________________________________________________________________________________
more doppelendprofiler, harbs, omz 4,4 sp, , baunr baujahr 1973. Drive 1.5 kw 3539 u / min 50 spindeldurchmesser 40 mm 2 saw 2 kw, 2 spindles 5.5 kw 2 spindles 4 kw type dmz 4 / 4 sp baunr. 3539
AD-ID: A274568
More Infos click here
___________________________________________________________________________________
1590 Order picking carriage, MUELLER, Trapezwagen, , 11 pieces Keystone car length 1200 mm width 1100 mm height 1750 mm working width 1000 mm working height 1500 mm price per piece!
AD-ID: A459277
More Infos click here
___________________________________________________________________________________
Schlitzmaschine , WIGO, Typ, , with 6 engines
AD-ID: A411812
More Infos click here
___________________________________________________________________________________
sclitzmaschine, stehle, , , 1 saw approximately 2.5 kw 1 spindle 40 mm about 4 kw schiebeschlitt
AD-ID: A300395
More Infos click here
___________________________________________________________________________________
Gehrungsstanze, SCHLEICHER, IV, Mitre punch without bar Yes; Cutting height max mm 110; Working width max mm 110; Stop length right mm 1.500; Main motor kW 1,5; Total connection kW 1,5; Cutters depth- adjustable Yes; Automatic punch feed Electric; Required space lxwxh 1850x600x1100; Ex price aprx. EURO 1.700; Availablity ab D-016,
AD-ID: A323770
More Infos click here
___________________________________________________________________________________
1469 Frame press, HESS, Hydro-Export, HESS - Rahmenpresse Hydro Export Arbeitsbereich 3000 mm Breite, 2000 mm Höhe Stabile Rahmenschweißkonstruktion aus starkwandigen Spezialhohlprofilen. Der Grundrahmen mit gehobelten Führungsbahnen für Schiebeschlitten und Druckbalken und die 50 mm HESS-Lochrasterung für die Zentralverriegelung des Schiebeschlittens bilden die Grundbasis für die Langzeitpräzision. Spielend leicht sind sowohl der Schiebeschlitten als auch die Druckbalken durch Kugellagerführungen in jede gewünschte Position zu verschieben. Auf dem Grundrahmen aufgebaut ist linksseitig das durchgehende Widerlager für die Breitenpressung. Dadurch entfallen bei der Breitenpressung zusätzliche Verstellarbeiten, da zusammen mit dem Vertikaldruckzylinder bzw. dem Widerlager auf dem Druckbalken sich zwangsläufig die Preßecke bildet. Und durch die Justierbarkeit dieses Widerlagers ist auch hier die Langzeitpräzision, vor allem aber die dauerhafte Winkelgenauigkeit, gegeben. Aufgebaut auf dem Grundrahmen ist auch der Schiebeschlitten mit schneller und leichtgängiger Breitenverstellung durch kugelgelagerten Laufwagen. Die Fixierung des Schiebeschlittens erfolgt im 50 mm-LochrasterSystem. Schiebeschlitten mit extrem langer Abstützlagerung, mit Messinggleitführungen, zur Aufnahme der Druckkräfte. Die auf dem Schiebeschlitten aufgebauten 2 Horizontaldruckzylinder sind stufenlos und durch Gewichtausgleiche leicht höhenverstellbar. Schiebeschlitten und rechter Vertikaldruckbalken bilden eine Einheit, sind aber für andere Verleimarbeiten, und zwar ohne Rüstzeit, abkoppelbar. Die 2 Vertikaldruckbalken sind mit integrierter Flachausführung für die Zylinderschnellverstellung ausgerüstet und über kugelgelagerte Laufwagen leicht verschiebbar. Auf den Druckbalken aufgebaut sind das Widerlager und der Druckzylinder. Druckplatten- und Widerlagertiefe 100 mm. Druckzylinder im 50 mm-Lochraster höhenverstellbar. Widerlager in 3 günstige Arbeitspositionen im Lochraster verstellbar. Schnelle, exakte und mühelose Positionierung der Vertikaldruckzylinder durch Zylinderschnellverstellung mit Gewichtsausgleich. 2 Vertikaldruckzylinder, doppelwirkend, 200 mm, Zylinderhub, 2000 kp (2000 N), Druckkraft pro Zylinder bei 100 bar, Fixierung durch HESS-Lochrasterung, 2 Horizontaldruckzylinder mit 80 mm Zylinderhub, 2000 kp (ca. 20000 N) Druckkraft pro Zylinder bei 100 bar. Hydraulische Versorgungsanlage mit 100 bar Druckleistung und Sicherheitsschaltung (für den Anschluß eines Mitteldruckbalkens ist die hydraulische Versorgungsleistung serienmäßig und ohne Mehrkosten mit einem zusätzl. Anschluß ausgerüstet). Steuerung bediengünstig linksseitig am Grundrahmen montiert. Stueuerung über 2 Steuerschieber mit den Schaltstellungen Pressen-StopLösen, automatische Enddruckabschaltung, eloxierte Maßskalen für Breiten- und Höheneinstellung, 100 mm Auflagen- und Druckplattentiefe.
Anschlußwerte: Elektro-Anschluß 1,1 kW, 380 Volt, 3/N 50 Hz.
Zubehör:
1 Mitteldruckbalken mit Zylinder-Schnellverstellung und Gewichtsausgleich, leicht verschiebbar auf Kugellagerlaufwagen Druckzylinder und Widerlager im Lochraster verstellbar. Druckzylinder 200 mm Zylinderhub, 2000 kp (ca. 20000 N), Druckkraft
bei 100 bar, Absperrventil, Druckplatten- und Widerlagertiefe 100 mm
(Techn. Angaben lt. Hersteller, ohne Gewähr!),
AD-ID: A313798
More Infos click here
___________________________________________________________________________________
rahmenpresse, schamberger, , , arbeitsbreite 5000 mm arbeitshöhe 3000 mm to fuss with hydraulically operated mitteldruckbalken
AD-ID: A300400
More Infos click here
___________________________________________________________________________________
Window production , Weinig, Unicontrol 10-5, , Weinia Unicontrol 10 / 5 online Built: 1992 Detailed technical description for the manufacture of parts, elements and small series. Performance about 75 - 80 parts per hour at an average piece length of 1.2 m. By double-parts production approximately 40 - 80% performance increase depending on the number of identical parts. In Längsprofilen is the unequal power increase max. 30%. SPINDELANORDNUNG: 1 Ablängsäge electronically gesteü [...Technical data truncated]
AD-ID: A455041
More Infos click here
___________________________________________________________________________________
1258 Glazing and control press, RUCHSER, RU-VL-1600, , Verladevorrichtung to Ruchser glazing and sealing table model RU-SW-1-90 Dimensions: length 1400 mm, width 1000 mm
AD-ID: A459197
More Infos click here
___________________________________________________________________________________
Window manufacturing plant , Gubisch, , , 4-Seiten-Hobel company Gubisch, Bj.:
88. type: BS 200/1, No.: 6507 5 spindles + glass border saw
Doppelendprofiler company Gubisch, Bj.: 88. type: DST/H, No.: 6540
profiliermaschine company Gubisch, Bj.: 88. type: FM 2000, No.: 6542
grinding machine company of steel, Bj.: 88. type: SaturnD Comfort,
No.: 2264 with tool IV 68
AD-ID: A417654
More Infos click here
___________________________________________________________________________________
SINGLE WOOD GRINDING MACHINE , LOEWER, DOUBLEMASTER DSM 1000 (LG 04825), , "Löwer" Double Master solid wood grinder (LG 04825) Type DSM 1000 Built in 1998 working width of 190 mm, Schleifdicke 2 - 160 mm Double single wood grinder to grind solid wood such as wood windows, etc. Stable and compact design with long tables and cast conveyor belt feed Schleifgenauigkeit 1 / 10 mm two rotary 5.5 kW electric motors for propulsion and 0.75 kW for feed speed 6/11/16 m / min. [...Technical data truncated]
AD-ID: A432734
More Infos click here
___________________________________________________________________________________
676 Assembling station, WEGOMA, Montagestation, Rahmenanschlagtisch pneumatisch schwenkbar.,
AD-ID: A319277
More Infos click here
___________________________________________________________________________________
1398 Tenoning machine, HABERKORN, FZS 1 Studio, cut-off saw
- spindle arrangement top
- engine 3 kW - spindle diameter 30 mm - 2800 rpm
- saw blade diamter 400 mm
tenoninfg spindle
- 40 mm diameter
- 7,5- kw
- 4200 rpm
- heigth 252 mm - tool diameter max 400 mm
studio table
- +/- 65 Grad Automatisch wechselndes Konterholz (programmierbar) pneum. Spanner
hochgenaue elektrische Gradanzeige
Automatischer Längenausgleich Konterholz bei jeder Winkeleinstellung in der Schnittebene
Sonderausstattungen:
Laser zur Werkstückpositionierung Sägeposition pneum. auf Revolver Längenanschlag LA 2000 technical data according to manufacturer - without guarantee! ,
AD-ID: A314140
More Infos click here
___________________________________________________________________________________
1553 Frame press, SCHAFBERGER U. SPROEDHUBER, T 2 RP, Die Rahmenpresse T 2 leistet einen enormen Pressdruck
(120 atü = 3000 kg) und ist daher in starkwandiger, verwindungsfreier Schweißkonstruktion hergestellt. Zwei bewegliche Längsdruckbalken (auf Wunsch auch ein
Mitteldruckbalken) sind mit doppeltem Kugellager und Führungsschienen aufmontiert. Diese Schienen ermöglichen eine kontinuierliche Höhenverstellung der Zylinder. Die Presszylinder werden durch Druckhebel-Schnellverstellung mit Selbsteinrastung verstellt. Um die Bearbeitung kleiner Werkstücke zu erleichtern, sind die Längsdruckbalken zusätzlich mit Auflageböcken ausgerüstet. Der Wagen läuft kugelgelagert und ist alle 5 cm einsetzbar. Außerdem ist der Wagen mit 2 verschiebbaren Zylindern zum waagrechten Verpressen ausgestattet. Presslänge und Presshöhe werden an der Skala eingestellt. Die Rahmenpresse T 2 hat nur eine geringe Lärmentwicklung, di die Hydraulikpumpe direkt mit dem Motor verbunden ist. Auch ein gleichmäßiger Pressdruck ist dadurch garantiert. Der serienmäßige Schutzschalter bietet einen vollkommenen Motorschutz. Schaltkasten und Bedienungshebel sind übersichtlich angebracht
und leicht zu bedienen. 2 elektrisch-ölhydraulische Schaltventile (mit 3 Schaltstufen) werden durch Handhebel betätigt. Dadurch können Sie mit Fingerspitzengefühl pressen und komplizierteste Rahmen-
konstruktionen zusammensetzen. Technische Daten:
Arbeitshöhe: 2300 mm
Arbeitslänge: 3000 mm Zylinderhub: 120 mm
5 Druckzylinder Drehstromotor 220/380 Volt: 2,2 KW
Nettogewicht: ca. 950 kg Platzbedarf (L/B/H): 4100 x 950 x 2600 mm (technische Daten lt. Hersteller - ohne Gewähr !),
AD-ID: A313811
More Infos click here
___________________________________________________________________________________
Glass border saw , STRIFFLER, GL 2730, , mitre cut 45 degrees with manual feed motion slot
notice pneumatically vertically for glass borders with slot and tap
AD-ID: A392456
More Infos click here
___________________________________________________________________________________
Window production line, GABBIANI, , Windows production line Gabbiani GDG Mod. Matrix CH
(for production of 10’ – 13'000 windows/year)
Consisting from:
moulder GSR 170/0, 4 spindeles
Conveyors
Tenoning machine Mod. Modul K: Cross cut saw 4,5 PS
Tenoning spindle 12,5 PS, spindle length 600mm
Moulder Gabbiani GSR 170/P, 6 spindles: r 10PS, t 5,5PS, r, l , l, b 5,5 PS
Marking device
Free from the middle of Dezember 2008
Preis excl. dismantling and loading,
AD-ID: A436387
More Infos click here
___________________________________________________________________________________
Angle plant , Okoma, UF2S2/2L, , - Buzz saw - 2 slot spindle - 6 profile spindle - 1 Glasleistentrennseage
AD-ID: A413024
More Infos click here
___________________________________________________________________________________
1336 Assembling station, URBAN, BT 1605, window assenbling station, pneumatic with up and down movement, tiltable
dimensionsL x B x H = 1600 x 1300 x 1000 mm,
AD-ID: A313749
More Infos click here
___________________________________________________________________________________
1576 Olive boring machine, AYEN, GBM 1, , YEN olive drill model machine table 1 GBM 2400 x 460 mm pull-out table to broaden 940 mm drilling unit RPMK 2 1.47 KW, 220/380 volts, 50 Hz 2,800 rpm doppelwirkender compressed air cylinder head drilling DS 21.5-3, 21.5 mm cc , 3 spindles tool consumption 1 x M10, 2 M10 left Absaughaube / Lower holder grown on well-head spindle head leadership Ms 14, 14 mm diameter. Adjustment range 0 - 80 mm rail stop on hand and screw Ans [...Technical data truncated]
AD-ID: A313753
More Infos click here
___________________________________________________________________________________
1458 Frame press, HESS, Hydro-Spezial, elektrohydraulisch, Arbeitsbreite 3550 mm, Arbeitshöhe 2250/2350 mm, motorische Breiten- und Höhenverstellung, Maßabfragung
im Pressbereich, opto-elektronische Maß-Einstellung, SPS-Steuerung mit Fehlerdiagnostik, 1 Mitteldruckbalken, 3 Pendeldruckplatten für
die Verpressung von Schrägfenstern
(techn. Daten lt. Hersteller - ohne Gewähr !),
AD-ID: A313816
More Infos click here
___________________________________________________________________________________
1589 Order picking carriage, EDER UND MUELLER, Faecherwagen doppelseitig, , 9 piece subjects 20 subjects double car length 2100 mm width 1200 mm height 1900 mm price per piece!
AD-ID: A459303
More Infos click here
___________________________________________________________________________________
Angle plant Weinig Unicontrol 06 , Weinig, Unicontrol 06 ATS-Steuerung, , -Ablängssäge pneumatically switched spindle speed 2800U/min/3kW-Leangenanschlag electrically positioned 2600mm spigot and electric spindle slot positionirt, Spindelhub 240mm, Spindeldrehz.3500U/min/7.5kW, spindle 50mm diameter, number of tools max. 4Stk, tool diameter max.320mm -1 profiling spindle Spindeldrehz.6000U/min./5.5kW, spindle diameter 40mm, Werkzeugspannleange 120mm, tool diameter max.232mm, number of tools 1p. -2 Profiling spindle lockers [...Technical data truncated]
AD-ID: A470128
More Infos click here
___________________________________________________________________________________
1591 Order picking carriage, EDER UND MUELLER, Rahmenfachwagen, , 3 piece specialist cars under price per piece!
AD-ID: A459284
More Infos click here
___________________________________________________________________________________
SCREW SUPPLY AUTOMAT , POWASERT, , , Powasert Schraubenzuführautomat automatic, pneumatic 6 bar, 4 bar
AD-ID: A334001
More Infos click here
___________________________________________________________________________________
5218 Tool for window production , LEITZ, Dufix IV 66 Holz, , Leitz Dufix IV, 66 windows tool consisting of: 16 slot 19 tools profile tools (without Umfälzwerkzeug) tools run on SCM Windor 60
AD-ID: A458966
More Infos click here
___________________________________________________________________________________
glazing bead saw, Haffner, GL 136 (17718), used
top condition
manufactured by Haffner
type GL 136
built in 1994
mach.-No. 507
pneum. clamping
pneum. saw feeder
workpiece rest 1500
with support stand
original price ca. 5,600.00 €
located in 97447 Gerolzhofen
No responsibility is taken for the correctness of this information!,
AD-ID: A298127
More Infos click here
___________________________________________________________________________________
1430 Order picking carriage, RUCHSER, RU FKW 1600, , 2 Ruchser wing Commission RU-car HFC 1600 L + W + H = 1800 x 1000 x 1300 mm Price per piece!
AD-ID: A459291
More Infos click here
___________________________________________________________________________________
1451 Frame press, HESS, Economic, rbeitsbereich: Breite 3050 mm, Höhe 2050 mm
Außenmaße: Breite 4100 mm, Höhe 3050 mm Tiefe 1000 mm
Technische Daten:
2 Vertikaldruckzylinder mit 150 mm Zylinderhub und 1600 kp
(16000 N) Druckkraft pro Zylinder bei 120 bar. Vertikal-
druckzylinder höhenverstellbar, Fixierung durch Lochreihen, 2 Horizontaldruckzylinder, 110 mm Zylinderhub, 1200 kp (12000 N).
Druckkraft pro Zylinder bei 120 bar, hydraulische Arbeitspumpe 120 bar Druckleistung und Sicherheitsschaltung, automatische Enddruckabschaltung, 2 Steuerschieber mit Schaltstellung *Pressen-Stop-Lösen*, 80 mm Auflagen- u. Druckplattentiefe. Zuberhör:
1 Mitteldruckbalken
Elektro-Anschluss: 1,5 KW, 400 Volt, 50 Hz. (Technische Angaben laut Hersteller, ohne Gewähr !),
AD-ID: A313815
More Infos click here
___________________________________________________________________________________
Gubisch, Gubisch, Gubisch Fensterfertigungsstraße, , Type DZG consisting of: - Abricht, joining and throat machine type BS 170 / 3 - transport train from moulders to Zapfenschneidstation - Double cones Schneider in Flow DZG procedure type - H-185-5 - Automatic transfer from the angle Längstransport in the Zapfenschneidstation - Abschiebevorrichtung and transport roller track 6500 mm - Fräsautomat type FM 2000 - roller rink - longitudinal Qürförderer, buffer distance - Electronic Zentralsteürung - Mechanical and e [...Technical data truncated]
AD-ID: A266022
More Infos click here
___________________________________________________________________________________
1584 Glazing and control press, FEDERHENN WORKER, Verglasungspresse, stroke height 500 mm
working width 170 mm
working height 2300 mm ,
AD-ID: A459222
More Infos click here
___________________________________________________________________________________
Double Mitre Saw, RAPID, DGL, Saw blade diameter mm: 550; Distance between saws at 90° max mm: 2.500; Cutting height mm at 90°: 250; Cutting width mm: 200; Saw blades tiltable up to °: 45; Compressed air pressure bar: 6; Intermediate support: Yes; Saw blades tiltable: Yes; Pneumatic clamping: Yes; Digital readout: Yes; Control:,
AD-ID: A469268
More Infos click here
___________________________________________________________________________________
1578 Order picking carriage, EDER UND MUELLER, Faecherwagen doppelseitig, , Commission festooned
AD-ID: A459304
More Infos click here
___________________________________________________________________________________
1080 Order picking carriage, RUCHSER, RU-PW-2SG, 2 pieces,
AD-ID: A459305
More Infos click here
___________________________________________________________________________________
1714 4 side moulder, Weinig, Unimat 23 EL + Mechanisierung, , MACHINE WITH NUTENFUeHRUNG working width in tool circle flight 140 mm = 20 to 230 mm in height tool circle flight 163 mm = 8 to 120 mm 1 First spindle lower horizontal spindle motor with mechanical brake 7.5 KW diameter 40 mm speed of 8,000 rpm, including high-ball bearings tool circle flight 125 to 180 mm Table hardened deposit before 1 lower spindle 2nd First right spindle Individüller vertical spindle motor with brake mechnanischer [...Technical data truncated]
AD-ID: A416999
More Infos click here
___________________________________________________________________________________
771 Transportanlage , GUBISCH , Laengsfoerderband , , Working length 4000 mm width 250 mm 980 mm height loading mass L x wxh 4000 x 600 x 980 mm Weight 400 kg Additional information Gubisch roll band 4000 x 600 x 980 mm, working width 250 mm Drive 0.37 Week 31 piece rubberized roles , 300 mm long, D = 100 mm, 5 piece pneumatic cylinders for Qürschub, 20 pieces taktbare roles high / low, filing for 2nd Without control wood (technical data according to the manufacturer - without guarantee!)
AD-ID: A463702
More Infos click here
___________________________________________________________________________________
1757 4 side moulder, WEINIG, Unimat 23 EL, !!! Technical description in RUSSIAN, more machine pictures as well as machine videos - if available - at the end of this description as attached files !!!
# 1757 Weinig Unimat 23 EL
......................................................................................................................................
Technical details summary
(please ask for possibly more included equpment)
......................................................................................................................................
In general
......................................................................................................................................
> working width: 230 mm
> working height: 160 mm
> number of spindles: 7 Stk.
> planning table 2000 mm
> feed motor: 4 kW
> feed speed: 5-24 m/min
> dimensions when installed: 6700 x 2300 x 2300 mm
> dimensions: 6700 x 2300 x 2300 mm
> weight, approx. 5000 kg
Spindle arrangement
......................................................................................................................................
> spindle 1: bottom
> spindle 2: right
> spindle 3: left
> spindle 4: right
> spindle 5: top
> spindle 6: bottom
> spindle 7: universal
Spindle description
......................................................................................................................................
> spindle 1: 5,5 kW, 6000 rpm, 40 mm diameter
> spindle 2: 4 kW, 6000 rpm, 40 mm diameter
> spindle 3: 5,5 kW, 6000 rpm, 40 mm diameter
> spindle 4: 5,5 kW, 6000 rpm, 40 mm diameter
> spindle 5: 7,5 kW, 6000 rpm, 40 mm diameter
> spindle 6: 4 kW, 6000 rpm, 40 mm diameter
> spindle 7: 5,5 kW, 6000 rpm, 40 mm diameter
More features
......................................................................................................................................
> cardan drive
> possible to divide out of glazing bead
> number of feeded rollers in table: 3
If the technical characteristics of this machines donnot fit with your requirements, please get in contact with us. Our longtime experienced team is looking forward to support you in technical adaptions or in finding a suitable machine for you!
Technical details according to manufacturer - without guarantee!
,
AD-ID: A459879
More Infos click here
___________________________________________________________________________________
Single wood grinding machine, HESS, EXPERT, , Bj 1989; Schleifbreite mm 190; Schleifaggregate total 4; Schleifaggregate below 2; part length min mm 280; piece mm thickness max 180; piece min mm thickness 4; belt speed m / s 25; air bar 6; connection kW total 26; weight ca . Kg 4,200; feed max m / min 25; feed Infinitely; St
AD-ID: A201811
More Infos click here
___________________________________________________________________________________
Window machining centre, angle plant, GUILLIET, TPC, Length of tenoning spindle mm 540; Moulding spindles 1; Length of profiling spindle mm 320; Spindle stroke entirely mm 300; Spindle diameter mm 55; Outer diameter profile tools mm 240; Flugkreis Schlitzwerkzeug 320; Compression bar 6; Total connection kW 35; Weight kg 2.380; Feed max m/min 12; Atel,
AD-ID: A345919
More Infos click here
___________________________________________________________________________________
Window tool kit IV68 in turret plate execution , GOLD, , , GOLD tool kit IV 68
in turret plate execution, for the production of turning tilting
windows and doors EURO crease system also openly lying closing plates
12 mm of falzluft, drilling 40 mm, rain rail: Property man Werra 12/22
BG - TEST - tools, transverse's treatment in turret plates window
frame slot window frame tap above window frame tap down wing slot wing
tap longitudinal's treatment in turret plates window frames inside
laterally and above window frames inside down crosswise wing interior
profile with border wing external profile laterally and above wing
external profile down, water slot wing external profile left central
crease glass border separation set fitting drill aluminum window sill
set change adding head for estimate seal equips firmly
AD-ID: A387021
More Infos click here
___________________________________________________________________________________
Window tool kit IV68 in turret plate execution , GOLD, , , GOLD tool kit IV 68
in turret plate execution, for the production of turning tilting
windows and doors EURO crease system also open-lying closing plates 12
mm of falzluft, drilling 40 mm, rain rail: Property man Werra 12/22 BG
- TEST - above tools transverse's treatment in turret plates window
frame slot window frame tap window frame tap down wing slot wing tap
window frame counter above/transverse's treatment window frame counter
down/transverse's treatment longitudinal's treatment in turret plates
window frames inside laterally and above window frames inside down
crosswise wing interior profile with border wing external profile
laterally and above wing external profile down, water slot wing
external profile left central crease glass border separation set
change adding head for estimate seal
AD-ID: A387022
More Infos click here
___________________________________________________________________________________
Narrow belt sanding machine, HESS, EXPERT, - sanding width 190 mm
- sanding height 4-180 mm
- 4 sanding aggregates: roller, ceramic sanding pad top/ bottom
- feed speed max. 25 m/min,
AD-ID: A452847
More Infos click here
___________________________________________________________________________________
1755 Window production centre, WEINIG, Unicontrol 10 CNC Spindeln, !!! Technical description in RUSSIAN, more machine pictures as well as machine videos - if available - at the end of this description as attached files !!!
# 1756 Weinig Unicontrol 10 CNC
......................................................................................................................................
Production capacity in 8 hours, approx. 70 pcs.
Technical details summary
(please ask for possibly more included equipment)
......................................................................................................................................
Cut-off saw
......................................................................................................................................
> cut-off saw electronically, horizontal variable adjustable: yes
> number of tools: 1 pcs.
> number of revolutions: 2880 rpm
> spindel diameter: 40 mm
> tool diameter max.: 400 mm
> engine: 3 kW
> laser lighter for recognizing saw cut: yes
Length stop
......................................................................................................................................
> length: 3600 mm
> length stop electronically: yes
1st Tenoning spindle
......................................................................................................................................
> number of tools: variabel, CNC-gesteuert
> length of spindle: 640 mm
> spindle stroke vertical: variabel, CNC-gesteuert
> number of revolutions: 2925 rpm
> spindle diameter: 50 mm
> tool diameter max.: 400 mm
> engine: 15 kW
1st profiling spindle:
......................................................................................................................................
> position: vertical right
> number of tools: variabel, CNC-gesteuert
> length of spindle: 320 mm
> spindle stroke vertical: variabel, CNC-gesteuert
> spindle stroke horizontal: variabel, CNC-gesteuert
> number of revolutions: 6000 rpm
> spindle diameter: 50 mm
> tool diameter max.: 232 mm
> engine: 11 kW
2nd profiling spindle:
......................................................................................................................................
> position: vertical right
> number of tools: variabel, CNC-gesteuert
> length of spindle: 320 mm
> spindle stroke vertical: variabel, CNC-gesteuert
> number of revolutions: 6000 rpm
> spindle diameter: 50 mm
> tool diameter max.: 232 mm
> engine: 11 kW
3rd profiling spindle:
......................................................................................................................................
> position: vertical right
> number of tools: variabel, CNC-gesteuert
> length of spindle: 320 mm
> spindle stroke vertical: variabel, CNC-gesteuert
> number of revolutions: 6000 rpm
> spindle diameter: 50 mm
> tool diameter max.: 232 mm
> engine: 11 kW
4th profiling spindle:
......................................................................................................................................
> position: vertical right
> length of spindle: 160 mm
> spindle diameter: 40 mm
> Radialverstellung getaktet 8 Postionen über Pneumatikrevolver
> Axialverstellung getaktet 8 Postionen über Pneumatikrevolver
5th profiling spindle:
......................................................................................................................................
> position: horizontal top
> number of tools: 1 pcs.
> length of spindle: 40 mm
> spindle diameter: 40 mm
> Radialverstellung getaktet 8 Postionen über Pneumatikrevolver
6th profiling spindle:
......................................................................................................................................
> position: horizontal bottom
> number of tools: 1 pcs.
More features:
......................................................................................................................................
> possible to use online: yes
> double piece package: yes
> back transport system for 1 man operating: yes
> display control: yes
> studio window equipment: yes
> electronical angle display for studio windows: yes
> control: PC-Steuerung Nexus
Option:
> 1 used window tool kit IV 68
> exit transport system
We also can offer you new window tools IV 78
If the technical characteristics of this machines donnot fit with your requirements, please get in contact with us. Our longtime experienced team is looking forward to support you in technical adaptions or in finding a suitable machine for you!
Technical details according to manufacturer - without guarantee!
,
AD-ID: A459486
More Infos click here
___________________________________________________________________________________
Cones racket , Loewer, ZA 3000 N , , Tl.-Id. 2069106 With solid Fräswelle and heavy cart, on the side and in the height-stellbar, stop schrägstellbar, dashboard top Technical data: Abkürzsäge: biggest blade Dia. 350 mm average height 120 mm 110 mm lateral adjustment circular saws 30 mm wave power 1.5 kW engine speed 2800 rpm. Slot spindle: Fräsdorn-Dia. 40 mm greatest tool Dia. 400 mm largest cones length 170 mm 160 mm A Einspannhöhe [...Technical data truncated]
AD-ID: A453912
More Infos click here
___________________________________________________________________________________
1743 Topfbandbohrmaschine , HESS , Ecklager- u.Olivenbohrmaschine , # 1743 HESS boring machine for corner bearing and olive
--------------------------------------------------------------------------------------
combined boring machine for corner bearing and olive borings on already pressed workpieces.
(techncial details according to manufacturer - without guarantee!),
AD-ID: A463559
More Infos click here
___________________________________________________________________________________
1276 Frame press, MAWEG, Euronova-Z, elektrohydraulische Rahmenpresse,
Einlegemaß 3100 x 2300 mm
ausgerüstet mit:
1 Gewichtsausgleich
automatische Öffnung
Automatiksteuerung
(techn. Daten lt. Hersteller ohne Gewähr !)
),
AD-ID: A313803
More Infos click here
___________________________________________________________________________________
1652 4 side moulder, WEINIG, Profimat 23 Steuerung/control, # 1652 Profimat 23 mit ATS Steuerung
......................................................................................................................................
Technical details summary
(please ask for possibly more included equpment)
......................................................................................................................................
In general
......................................................................................................................................
> working width: 230 mm
> working height: 120 mm
> number of spindles: 7 Stk.
> planning table 2000 mm
> feed motor: 3 kW
> feed speed: 6 - 36 m/min
> total performance: 33 kW
> dimensions: 4300x1900x1700 mm mm
> weight, approx. 3500 kg
Spindle arrangement
......................................................................................................................................
> spindle 1: bottom
> spindle 2: right
> spindle 3: left
> spindle 4: right
> spindle 5: top
> spindle 6: bottom
Spindle description
......................................................................................................................................
> spindle 1: 4 kW, 6000 rpm, 40 mm diameter
> spindle 2: 7,5 kW, 6000 rpm, 40 mm diameter
> spindle 3: 6000 rpm, 40 mm diameter
> spindle 4: 5,5 kW, 6000 rpm, 40 mm diameter
> spindle 5: 5,5 kW, 6000 rpm, 40 mm diameter
> spindle 6: 4 kW, 6000 rpm, 40 mm diameter
More features
......................................................................................................................................
> divide out of glazing beam: yes
If the technical characteristics of this machines donnot fit with your requirements,
please get in contact with us. Our longtime experienced team is looking forward to support
you in technical adaptions or in finding a suitable machine for you!
Technical details according to manufacturer - without guarantee!,
AD-ID: A460060
More Infos click here
___________________________________________________________________________________
MITRE STAMPING MACHINE, JYDEN, , , Gehrungsstanze Make Jyden
AD-ID: A299557
More Infos click here
___________________________________________________________________________________
Tap racquet + window tool kit , Koelle, Z 40, , HR-REF 1839 kind of machine: Tap
racquet tap slot milling cutter with window set of manufacturers:
Koelle type: Z 40 year of construction: 1980 weight approx.: 300 kg of
mass approx.: L (mm): 2,000 B (mm): 1,700 H (mm): 1,520 operating
voltage: 380 V equipment: - window set of IV 68 - automatic brake
milling spindle number of revolutions/sawing number of revolutions:
4,000 U/min sawing number of revolutions: 3,000 U/min engine
performance milling cutter: 7.5 KW of engine performance saw: 2.2 KW
condition: - very maintained - ready for use price: 3.900, - euro net
location: Region North-Rhine/Westphalia availability off: immediately
shipping equipment locally: missing dismantling, loading and transport
are task of the buyer. The trading firm Ravensberg organizes if
necessary gladly the loading/transport of the commodity. The trading
firm Ravensberg is a broker and not owner of the offered commodity. We point out expressly that the trading firm Ravensberg furnishes only
switching achievements that is not called even contracting parties of
the buyer becomes. All information is based on the data of the owner.
Mistakes remain reserving.
AD-ID: A367666
More Infos click here
___________________________________________________________________________________
Montagetisch for windows, Polzer, PDK 16 (17720), , uses make Polzer type PDK 16 year of construction 2/1995 No. 018/0688 mobile mechanical. inclinable swivelling resting upon enlargement three-laterally extendable storage site 97447 Gerolzhofen
AD-ID: A298404
More Infos click here
___________________________________________________________________________________
Fingerjointing Press, KNEZ, HHP 3600, Pressing cylinders 1; Pressing force kg 3.600; Workpiece width max mm 200; Workpiece thickness max mm 90; Weight kg 80; Required space lxwxh 900x900; Ex price aprx. EURO 1.800; ,
AD-ID: A242763
More Infos click here
___________________________________________________________________________________
1723 Schleifmaschine , HESS , Junior , , number of Schleifaggregate 2 st. Schleifbreite 190 mm Schleifhöhe max. 150 mm total value of 14 kw port loading mass L x wxh 2000 x 1300 x 2200 mm weight of 1300 kg single-sensitive information wood grinder basic structure: Stable, heavy Schweisskonstruktion from starkwandigen Rechteckhohlprofilen with additional static Aussteifungen calculated for optimum vibration. Offsets Schleifeinheiten arranged with grossdimensionie [...Technical data truncated]
AD-ID: A463561
More Infos click here
___________________________________________________________________________________
, Gubisch, CW 1 , Tl.-Id. 2049205
40 mm diameter of spindles in longitudinal contou)
with work sations and possibilities:
- one sided slit machine for straight and slant connections
- trimming machine with glass-strip dividing unit
for longitudinal profiling
- rebate operation with sybchronism milling unit and
immersion automatic, tiltable frame frence up to 650 mm
- fitting groove milling unit
- central control
specification / technical description
automatic cutting to length saw immersed from top
motor capacity, inclusive motor brake 3.0 kW, spindle rotation 2800 rpm.
cutting diameter 350 mm, spindle diameter 30 mm, pressing flange,
1 carrier 6 mm diameter, TK 42 mm, 120 mm diameter, pneumatic
vertical lift 100 mm, pneumatic horizontal lift against 2 manual
6-times revolver fences 160 mm, chip suction hood with suction nozzle
diameter 100 mm
slit unit
motor capacity inclusive motor brake 9,2 kW, spindle rotation 3800 rpm.,
cutting diameter max. 320 mm
spindle diameter 50 mm, spindle usable length 300 mm,
pneumatic vertical lift fixed 2 x 100 mm suitable for 3 gang tools,
zero height 10 mm, chip suction hood with nozzle diameter 160 mm
slit table
table height over ground 920 mm, feed automatic, with 2 speeds
slow 7 m/min., fast 14 m/min., motor capacity inclusive motor brake
0,21/0,3 kW, drive disconnectable for hand feed (bevel cut), pneumatic work-
piece clamping, 1 clamp cylinder with 2 additional pressure shoes
counter wood equipment
Counter wood changer with 2-fold automatic changer and manually adjustable
to 180 degrees, 2 additional lock counters possible, that likewise in an
automatic operation counter locks
length fence
Fence system with 3 stages, a) outer frame, b) outer sash upright,c) outer
sash diagonally, manual adjustable, length 2300 mm, for
slanting windows swivel +/- 60 degrees
lengthening up 1000 mm to 3300 mm
angular transfer
automatic over vertical cyclec feed roll in milling feed
milling machine
for longitudinal counter and rebate operation of windows/doors with the
following units:
- sychronism run milling unit with immersion automatic
- synchronism and counter run, immersion automatic useable for rebation,
motor capacity inclusive motor brake 7.5 kw, spindle rotation
6000 rpm., cutting diameter 240 mm max., side fences adjustable to zero
diameter of tools 140 mm max., 112 mm min., zero height 10 mm, spindle
diameter 40 mm, spindle usable length 100 mm, pneumatic horizontal
lift 80 mm, chip suction hood with suction nozzle diameter 120 mm
profile milling unit
running in opposite direction, motor capacity inclusive motor brake 9,2 kW,
spindle rotation 6000 U/min., cutting diameter 240 mm max.,
side fence adjustable for zero diameter of tools 140 mm max., 112 mm min.,
zero height 10 mm, spindle diameter 40 mm, spindle usage length 220 mm,
pneumatic vertical lift fixed 1 x 100 mm, suitable for 2 gang tools, chip
suction hood with suction nozzle diameter 140 mm
groove milling unit
running in opposite direction, motor capacity 4,0 kW incl. motor brake,
spindle rotation 6000 rpm., cutting diameter, profile depth 30 mm
( fitting groove depth) 200 mm fixed, zero height 10 mm, spindle diameter
40 mm, useable spindle length 100 mm, horizontal lift 80 mm, chip
suction hood with suction nozzle diameter 120 mm
glass strip sawing unit
counter run, motor capacity incl. motor brake 3.0 kW,
spindle rotation 3000 rpm., spindle diameter 30 mm,
spindle working length 15 mm, fly cirkle diameter 200 mm,
vertical stroke pneumat. 100 mm, pneum. cycled, glass trip
removal incl. flashback protector, chip suction hood with
suction nozzle diam. 80 mm
feed
motor capacity 0,75 kW, feed speed 8 m/min., feed roll diameter 100 mm,
roll spacing in field of operation unit 110 mm, field of drawing in 200 mm,
single feed roll adjustable slant to fence
Vertical right fence
Height 85 mm, fence 1 for 1 mm chip removal adjusted,
fence 2 pneumatic cycled for zero - 1 mm chip removal.
adjustable for zero diameter 112-140 mm
Workpiece reverse equipment
- Good overview of centralized operation table with standard operation
and partial automatic in slit- and profile milling unit
(3 programs for outer frame production)
- Single- and interconnection with automatic angle delivery function
- With rebate operation switch inclusive 4-way operation
- Groove unit for edge transmission mill is per button operational
- glass strip dividing saw unit incl. pneum. cycled
guide rail which can be added by press button
- easy understandable, logical built on handling of operation
Workpiece dimensions
- Slit unit: length min. 200 mm + tenon
width min. 42 mm, max. 200 mm
thickness min. 42 mm, max. 80 mm
- Milling unit: length min. 220 mm + tenon
width min. 42 mm, max. 200 mm
thickness min. 42 mm, max. 80 mm
- Rebate unit: frame length min. 400 mm
technical connection data:
air pressure connection 3/8'', 8 bar
air pressure consumption ca. 40 NL/min.
(air Pneurop 6611)
air suction quantity 135 m3/min.
air suction speed 32 m/sec.
operating voltage 3 phases, 380 Volt, 50 cyc
electrical connection total 38,0 kW
electrical equipment according to VDE
,
AD-ID: A444912
More Infos click here
___________________________________________________________________________________
GLASS BORDER SAW, HAFFNER, GL 136, , conditions left / right
AD-ID: A295631
More Infos click here
___________________________________________________________________________________
843 Frame press, HESS, Kantenpresse Redpoinline Nora, HESS - Kantenpresse REDPOINTLINE NORA 2500 mm - 1-seitig - neu
stationär, handhydraulisch, Arbeitsbereich: Breite 2500 mm, Höhe 1800 mm, 4 Druckbalken vertikal 1 Niederhalter horizontal,
AD-ID: A313797
More Infos click here
___________________________________________________________________________________
1577 Frame press, MAWEG HILDEBRAND, Quickomat U-Z, Der Rahmenpressautomat der absoluten Spitzenklasse im 3 mm Raster.
Maschinengestell (mit Rahmen innen abgedeckt) mit 1 festen, als Anschlag dienenden und 1 beweglichen Längsdruckbalken - präzisionsgehobelt - in schwerster Ausführung. 2 Querträger mit je 1 über Zahnstangen (3 mm Raster) geklemmten Vertikal-
druckzylinder (21000 N, Hub 180 mm). Veränderung der Arbeitshöhe durch Zwischenzulage um 300 mm. 2 Horizontaldruckzylinder (21000 N, Hub 100 mm). Alle Arbeitszylinder mit Hubbegrenzung und Sicherheitsdruckplatte. Automatiksteuerung als Druckknopfsteuerung am linken festen Längs-
druckbalken montiert, mit automatischem Schaltfolgeablauf. Zusätzliche
tragbare Handsteuerung für Setzhölzer, Sprossen und Kämpfer. 1 Hydraulikaggregat mit stufenlos regelbarem Pressdruck. Elektrischer Anschlusswert 1,5 KW, 400/230 Volt, 50 Hz., 3/PE nach VDE. Klemmung des beweglichen Längsdruckbalkens über Zahnstangen
(im 3 mm Raster). Alle Auflagen und Druckplatten 100 mm Tiefe. Automatische Einstellung der Maße mittels der zu pressenden Hölzer. Arbeitsbereich: 3600 mm x 2600 mm 1 Mitteldruckbalken kompl. mit Absperrhahn 2600 mm
1 zusätzlicher Horizontalzylinder mit Absperrhahn Kleinstrahmenzulage zur Überbrückung von 1. oder 2 Druckbalken
Mehrpreis für ALWA-Press Zulagen EUR 500,00
Arbeitsvorgang der ALWA Presselemente mit der Rahmenpresse:
1. Rahmenhölzer zusammenstecken (so gut wie möglich)
2. Rahmen in die Presse einlegen
3. ALWA-Zulagen auf und einsetzen
4. Druckzylinder "horizontal" ausfahren bis Fugen a geschlossen sind
5. Druckzylinder "vertikal" ausfahren bis Fuge b geschlossen ist
6. Druckzylinder miteinander zurückfahren (horizontal und vertikal)
7. Rahmen und ALWA Zulagen in der Presse ausrichten
8. gewünschten Pressdruck einstellen. 9. Alle Druckzylinder (horizontal u. vertikal) miteinander ausfahren
bis eingestellter Druck erreicht ist. Hinweis: nicht zuviel Pressdruck geben, wenn nötig am Ende
des Pressvorgangs (9.) Druck nachstellen
(techn. Daten lt. Hersteller - ohne Gewähr !),
AD-ID: A313800
More Infos click here
___________________________________________________________________________________
1467 4 side moulder, Weinig, Unimat 22 E-Unispindel, # 1467 Weinig Unimat 22 E ......................................................................................................................................
Technical details summary (please ask for possibly more included equpment) ...................................................................................................................................... In general ...................................................................................................................................... > working width: 220 mm > working height: 130 mm > number of spindles: 8 Stk. > planning table 2000 mm > feed motor: 5,5 kW > feed speed: 6-36 m/min > total performance: 52 kW > dimensions: 6600 x 1900 x 1600 mm > weight, approx. 5500 kg
Spindle arrangement ...................................................................................................................................... > spindle 1: bottom > spindle 2: right > spindle 3: left > spindle 4: right > spindle 5: top > spindle 6: bottom > spindle 7: top > spindle 8: universal , sawing spindle
Spindle description ...................................................................................................................................... > spindle 1: 4 kW, 40 mm diameter > spindle 2: 4 kW, 40 mm diameter > spindle 3: 5,5 kW, 40 mm diameter > spindle 4: 4 kW, 40 mm diameter > spindle 5: 7,5 kW, 40 mm diameter > spindle 6: 4 kW, 40 mm diameter > spindle 7: 5,5 kW, 40 mm diameter > spindle 8: 11 kW, 40 mm diameter
If the technical characteristics of this machines donnot fit with your requirements, please get in contact with us. Our longtime experienced team is looking forward to support you in technical adaptions or in finding a suitable machine for you!
Technical details according to manufacturer - without guarantee!
8 spindles (7 spindles + universal spinlde)
All spindles diameter 40 mm
1. spindle bottom 4,0 KW
2. spindle right 4,0 KW
3. spindle left 5,5 KW
4. spindle right 4,0 KW
5. spindle top 7,5 KW
6. spindle bottom 4,0 KW
7. spindle top 5,5 KW
8. spindle universal 11,0 KW (for sawing)
cardan drive variable 5,5 KW pneumatic roller pressure
waxilit pump
(technical details according to manufacturer - without guarantee!),
AD-ID: A416985
More Infos click here
___________________________________________________________________________________
Umfaelzautomat, Michalski, PL 2-6, , 1. 150 x 50 mm, 4.4 KW of 2. 210 x 50 mm, 11.0
KW of 3. 210 x 50 mm, 11.0 KW of 4. 150 x 50 mm, 4.4 KW vertical
stroke: 125 mm horizontal stroke: 120 mm with feed motion 3-18 m/min.
AD-ID: A304529
More Infos click here
___________________________________________________________________________________
window tool set, , JV 68-64 (19924), used
JV 68-64
Gold turnplates - BG-form
Euro rabbet
glazing rabbet air space
rain rail - Gutmann
Neckar 22 F BUG R 12.22K
screwed on 50 mm
13-parts
a.o.
located in 97447 Gerolzhofen
No responsibility is taken for the correctness of this information!
,
AD-ID: A471419
More Infos click here
___________________________________________________________________________________
, Panhans, TYP 261, part Id-no. 2059138
year of construction 1983
pivoting stop yes
cutting saw 2,2 kW
cutting height 125 mm
moving carrier plate manually
pivoting and slitting spindle 1 Stück
motor capacity 5,5 kW
speed 4 x 1000 U/min
height adjustment manually
machine dimension without accessories length 1750 mm
width 1750 mm
height 1650 mm
weight 600 kg,
AD-ID: A385828
More Infos click here
___________________________________________________________________________________
CNC window manufacturing plant , SCM, Windor 50, , equipped mit:1
cutting sawing aggregate schwenkbar1 tap milling aggregate/- 60
degrees interpolating (autom. manufacturing of Schraegteilen)2 of
milling aggregates rechts1 Fraesaggrgat horizontal oben1 milling
aggregate horizontal unten1 Glasleisten-Trennsaege1 additive
Fraesaggregat1 milling aggregate links1 evacuation transverse conveyor
Fabr. Mahros L/B 4500/1900 mm1 small wood conveyor Fabr. Mahros L/B
2500/200 mm
AD-ID: A376689
More Infos click here
___________________________________________________________________________________
slot sets , oppold system, schlitzgarnuturen, , 5 schlitzgarnituren 4o mm diameter. wendeplattenmesser flügel for complete and stock. f2 2806568/eu 280x20x60 bgform nr. 77071
AD-ID: A333476
More Infos click here
___________________________________________________________________________________
WINY university University of 1, WEINIG, Unicontrol: Unitec + Univar + Leitz Fraeser, Bj.84, , WINY window manufacturing plant, Bj.1984, consisting of 1).Zapfen-und slot unit Unitec 1 with 2-Spendel (shortening sows 3-KW, D=40 mm and slot spindle 11-KW, D=50 mm for 3-Werkteuge. Further 2).Profilier-und Umfraeseinheit: UNIVAR 1 consisting of: Spindle on the right of 11-KW, D=50 mm; Spindle on the right of 11-KW, D=50 mm; Fitting milling cutter 2.2 KW, D=40 mm; Saege-und Nutspindel 2.2 KW, D=40 mm AND kpl Fesnterwerkzeugsatz IV-68 of LEITZ. Photo by email. Korespondencja w jezyku polskim.
AD-ID: A220892
More Infos click here
___________________________________________________________________________________
Window machining centre, angle plant, SCM, METHOD SUPER, Length of tenoning spindle mm: 620; Moulding spindles: 3; Length of profiling spindle mm: 620; Equipped for outer profiling: Yes; Glass bead aggregate: Yes; Automatic counter against splintering: Yes; Spindle stroke stepless: Yes; Control: Programmable control; Splinter protection for outer profili,
AD-ID: A468542
More Infos click here
___________________________________________________________________________________
Window manufacturing fitting inlet machine, Striffler, 2400, , Type 2400, year of construction 1989
AD-ID: A229136
More Infos click here
___________________________________________________________________________________
glazing bead saw, Haffner, GL 136 (16625), used
very good condition
manufactured by Haffner
type GL 136
built in 1992
mach. No. 393
3 air driven clamping devices
pneumatic saw feeder
pneumatic workpiece clamping
incl. equipment:
workpiece rest 1,500 mm
fence ca. 1,500 mm
original price ca. € 5,600.00
cleaned, function checked, test run
No responsibility is taken for the correctness of this information! ,
AD-ID: A243197
More Infos click here
___________________________________________________________________________________
1653 Rahmenpresse , HESS , Lux 2000 Opto , , working width 3550 mm height 2400.2600 mm number of cylinders 5 St. charging mass L x wxh 5150 x 1500 x 3340 mm Weight 2800 kg 1653 Hess Hydro Lux 2000 Opto Press under machine .......... .................................................. .................................................. ........................ Technical Data Summary (eventüll addition beinhaltetes accessories please inquire) ....................................... . [...Technical data truncated]
AD-ID: A463691
More Infos click here
___________________________________________________________________________________
Tenon router, Rex, , stock-no. 4927
Tenon router Rex
router spindle diameter 50 mm, 4 kW
saw 2 kW, height adjustable and adjustable to the side
sliding table with measure fence on the table
operators panel right side
weight: 650 kg
***************
Pozycja nr 4927
Czopiarka jednostronna Rex
Wrzeciono frezujace o srednicy 50 mm, 4 kW
pila 2 kW, przestwna na wysokosc i bocznie
wozek boczny z przykladnica
ciezar 650 kg
,
AD-ID: A334282
More Infos click here
___________________________________________________________________________________
Outside profiling and moulding machine, SAC, P 6, Moulding spindles: 2; Tools per spindle: 3; Spindle stroke entirely mm: 170; Spindle diameter mm: 50; Tool diameter max mm: 240; Spindle length mm: 270; Main motor kW: 5,5; Total connection kW: 14,70; Weight kg: 1.300; Glass bead aggregate: Yes; Down-cut milling function: Yes; Spindle stroke: Stepp,
AD-ID: A431349
More Infos click here
___________________________________________________________________________________
5230 Window production centre, GUBISCH, DST-H verkettet, , IN CONTRACT TO SELL! *************************************** 1 GUBISCH window manufacturing plant model DST-H linked with Zentralsteürung ************************************************** ********************************************* Installation in U - form 1-man operation consisting of the following machines: cutting machine GUBISCH BS 170 / 3 working width of 170 mm, working height 115 mm, with 6 spindles, feed 2.2 KW, infinitely up to 30 m / min [...Technical data truncated]
AD-ID: A460027
More Infos click here
___________________________________________________________________________________
Wink Elan Location , SAC, F 6, , Equipment: Ablängsäge from above: 1 Slot shaft, spindle-50 mm length 320 mm 2 Slot shaft, spindle-50 mm length 320 mm 1 Profile spindles, spindle-50 mm length 320 mm 2 Profile spindles, spindle-50 mm 320 mm glass bar saw edge gear for 1 tool
AD-ID: A450603
More Infos click here
___________________________________________________________________________________
1550 Transportanlage , HESS , Laengsfoerderband , , Working length 3000 mm width 250 mm height 850 - 1000 mm load mass x W L H 3200x800x1250 mm x 200 kg weight-sensitive information as an intermediate bond between cutting machine and grinding speed adjustable (technical data according to the manufacturer - without guarantee!)
AD-ID: A463700
More Infos click here
___________________________________________________________________________________
Edgebander Klebemaschine , TEKNA Anton System, Hermann Loth, TK 259, , sealing machine / edgebander *** Manufacturer: Anton TEKNA system, Hermann Loth Type: TK 259 No: 22006 Built: 1994/95 - Gehrungseinstellung from -45 to +90 - - tank for turpentine - - pressure, max. 12 bar - - Oeler - - Foot Switches - Mass: 90 cm high, 40 cm wide, 31 cm deep length of a Auflegers: 70 cm machine used for the purpose of turpentine before the frame parts zusammengef [...Technical data truncated]
AD-ID: A471122
More Infos click here
___________________________________________________________________________________
1355 Outside profiling machine, Weinig, Univar 6, Weinig Umpfälzmaschine Typ Univar 6 Zum Umfräsen von Fenstern, Türen und ähnlichem mit ungleich umlaufenden Profilen. Anordnung der Aggregate: 1. Gleichlaufspindel rechts, pneumatisch getaktet 2. Profilierspindel rechts Profilierspindel zur Aufnahme von mehreren Werkzeugen übereinander geeignet. Spindelbewegung pneumatisch. Zum ausrißfreien Umfräsen ist die 1. Spindel im Gleichlauf arbeitend. Jeweils die letzten 100 mm eines Rahmendes taucht diese Spindel mit dem entsprechenden Werkzeug in das Holz ein, um Ausrisse an den Rahmen- ecken zu vermeiden. Maschinenständer, Tische, Anschläge: Maschinenkörper aus schweren, verwinderungsfreien, schwindungs- dämpfänden Elementen. Anschläge rechts im Profilierbereich aus Pertinax. Vor Profilierspindel ein geteilter Anschlag mit Schiebeleiste für Kurzteile. Zusätzliche Aufschlagschine für groß- formatige Rahmen. Vorschubsystem Durchgehender, kettenloser Vorschub bestückt mit Gummiwalzen. Abblas- vorrichtung für Vorschubwalzen und Tisch. Spindel, Hauben: Spindeln mit hoher Rundlaufgenauigkeit und dynamisch ausgewuchtet. Absaughauben konstruiert für günstigen Späneflug. Einfachster Werkzeugwechsel durch schnell zu öffnende Haubdeckel. Maschinenbedienung, Einstellhilfen: Bedienung der Maschine von der Vorderseite. Einstellung der Anschläge zum Werkzeugdurchmesser mittels mechanischer Zahlenanzeige. Maschinenelektrik, Motore, Steuerung: Elektrische Ausführung nach DIN VDE 0113 - Elektrische Ausrüstung von Industriemaschinen EN 60204 IEC 204 - 1. Weitere Elektro-Vorschriften sind nicht berücksichtigt. Motore dynamisch ausgewuchtet. Steuerung der Werkzeugpositionen der Wahlschalter von Bedienpult. Werkzeuge: Maschine ausgestattet mit Bedienungswerk- zeuge. Technische Daten:
1. SPINDEL - Gleichlaufprofilierspindel Anzahl Werkzeuge 1 2. SPINDEL 2 x 95 mm Hub für 3 Werkzeuge
oder:
3 x 80 mm Hub für 4 Werkzeuge
Spindeldrehzahl 6000 UpM Spindeldurchmesser 50 mm Werkzeugspannlänge 320 mm
Werkzeugdurchmesser max. bei Nulldurchmesser 112 mm - 210 mm bei Nulldurchmesser 140 mm - 232 mm Werkzeugdurchmesser max.( Umfräsen) 232 mm Werkzeug Nullflugkreis 112 - 140 mm Grundstellung unter Tisch 10/5 mm Motorstärke: Spindel 5,5 Kw
Vorschub - 1,1 Kw Vorschub-Profiliereinheit 8 m/min Vorschubwalzenabstand 120 mm Vorschubwalzenbreite 50 mm Vorschubwalzendurchmesser 95 mm Anschlaghöhe 70 mm Arbeitsbreite min. 30 mm, max. 220 mm Arbeitshöhe min. 30 mm, max. 100 mm Werkstückläange min. 245 mm ohne Zapfen Sonderausrüstung: 3 mechanische Spindelbremse für Gleich- laufspindel, Profilierspindel und Zusatzaggregate Sicherheitshaube gemäß EG-Masch. Richtlinien 1 Beschlagfräseinheit, rechts: zum Einfräsen der Beslagnute im Umfräs- gang bzw. zum Nuten im Längsprofil. Pneumatische Horizontalbewegung mit Wahlschalter im Bedienpult. Motorstärke 2,2 Kw Drehzahl 6000 UpM Spindeldurchmesser 40 mm Spannhöhe 125 mm Werkzeugflugkreis min. 140 mm max. 180 mm Grundstellung unter Tischebene 10 mm Beschlagfräse in Sonderausführung: Spannlänge 150 mm Axialhub 80 mm, 3 Stellungen 3 Werkzeuge Radialtakt, 2 Stellungen Motorversärkung 3 Kw Bildschirmsteuerung für 99 Fenstertypen. 1 Typ kann bis zu 8 verschiedene Teile enthalten. Fertigungsmöglichkeiten: Einzelteile, Umfräsen. Dateneingabe über Tastatur mit integrierter Bedienerführung und Fehlerdiagnose. Vorschub stufenlos regelbar, 6 - 12 m/min. Motorverstärkung für Gleichlaufspindel von 4 Kw auf 7,5 Kw Motorverstärkung für Profilierspindel von 5,5 Kw auf 11 Kw Verstellbare Anschläge rechts, Verstellbereich 0/0,5/1/2/3/4/5 mm 7 hochtaktbere Walzen im Einlauf zur Verkürzung der Durchlaufzeit beim Umfräsen (techn. Daten lt. Hersteller - ohne Gewähr !),
AD-ID: A267278
More Infos click here
___________________________________________________________________________________
5230 Window production centre, GUBISCH, DST-H verkettet, , IN CONTRACT TO SELL! *************************************** 1 GUBISCH window manufacturing plant model DST-H linked with Zentralsteürung ************************************************** ********************************************* Installation in U - form 1-man operation consisting of the following machines: cutting machine GUBISCH BS 170 / 3 working width of 170 mm, working height 115 mm, with 6 spindles, feed 2.2 KW, infinitely up to 30 m / min [...Technical data truncated]
AD-ID: A460030
More Infos click here
___________________________________________________________________________________
Glass bar saw , Haffner, GL 136, , glass bar saw from Haffner
AD-ID: A456199
More Infos click here
___________________________________________________________________________________
1597 Frame press, HESS, Quickstep, !!! Technical description in RUSSIAN, more machine pictures as well as machine videos - if available - at the end of this description as attached files !!!
# 1597 Hess Quickstep Rahmenpressautomat
......................................................................................................................................
Technical details summary
(please ask for possibly more included equpment)
......................................................................................................................................
In general
......................................................................................................................................
> Working width: 4000 mm
> Working height: 2550 mm
> Total power: 4 kW
> Installed dimensions: 5000x1100x2900 mm
> Loading dimensions: 5000x1100x2900 mm
> Weight, approx. 1800 kg
Technical characteristics:
......................................................................................................................................
> Hydraulic: yes
> Number of vertical pressing cylinders: 4 pcs.
> Number of horizontal pressing cylinders: 2 pcs.
> Kind of adjustment vertical: electrically (long stroke cylinders)
> Kind of adjustment horizontal: electrically
More features:
......................................................................................................................................
> Middle clamping beam yes 2 pcs. (picture just shows 1 middle clamping beam)
> Pendulum pressing plates: yes
> Opto-elektronic, that means full-automatic
measuring and adjustment, horizontal: yes
If the technical characteristics of this machines donnot fit with your requirements, please get in contact with us. Our longtime experienced team is looking forward to support you in technical adaptions or in finding a suitable machine for you!
Technical details according to manufacturer - without guarantee!
,
AD-ID: A459848
More Infos click here
___________________________________________________________________________________
1533 Window production line, OKOMA, UF 2 S EG-GLS, # 1533 UF 2 S EG-GLS ...................................................................................................................................... Production capacity in 8 hours, approx. 45 pcs.
Technical details summary (please ask for possibly more included equpment) ...................................................................................................................................... Cut-off saw ...................................................................................................................................... > cut-off saw with pneumatic stroke: yes > number of tools: 1 pcs. > number of revolutions of spindle: 2800 rpm > spindle diameter: 30 mm > tools diameter maximum: 400 mm > motor power: 3 kW Length fence ...................................................................................................................................... > manual length fence: yes
Tenoning spindle ...................................................................................................................................... > number of tools: 3 pcs. > spindle stroke: 3 x 90 mm > number of revolutions of spindle: 4000 rpm > spindle diameter: 50 mm > tool clamping length: 270 mm > tools diameter maximum: 320 mm > motor power: 11 kW
1st profiling spindle ...................................................................................................................................... > number of tools: 3 pcs. > spindle stroke vertical: 3 x 90 mm > spindle stroke horizontal: 80 mm > number of revolutions of spindle: 7000 rpm > spindle diameter: 50 mm > tool clamping length: 270 mm > tools diameter maximum: 240 mm > motor power: 11 kW
2nd profiling spindle ...................................................................................................................................... > number of tools: 3 pcs. > spindle stroke vertical: 3 x 90 mm > spindle stroke horizontal: 80 mm > number of revolutions of spindle: 7000 rpm > spindle diameter: 50 mm > tool clamping length: 270 mm > tools diameter maximum: 240 mm > motor power: 11 kW
Additional aggregates ...................................................................................................................................... > fitting milling aggregate: 1 pcs., 1 tools
> cut-off of glazing beam: yes
More features ...................................................................................................................................... > outside profiling equipment for sashes: yes > return feed roller band Option: > 1 used window tool kit IV 68 + Holz-Alu We also can offer you new window tools IV 78
If the technical characteristics of this machines donnot fit with your requirements, please get in contact with us. Our longtime experienced team is looking forward to support you in technical adaptions or in finding a suitable machine for you!
Technical details according to manufacturer - without guarantee! ,
AD-ID: A314136
More Infos click here
___________________________________________________________________________________
Window production , Hemag/Weinig/Haffner, , , Zui sale is a complete wooden window production. With full Zubehör.Unter electricity Vorführbar. VB. Request information
AD-ID: A459266
More Infos click here
___________________________________________________________________________________
Angle plant Gubisch , Gubisch, Centromat CW1, , HR-REF-490 Maschinenart: Window Machine Manufacturer: Gubisch Type: Centromat CW1 Built: 1993 Weight: 3,500 kg approximately: length 2,400 mm Overall width 2,400 mm Ablängsäge engine speed at 50 Hz saw blade diameter spindle clamping flange Vertikalhub Horizontalhub attacks revolver 3.0 kW 2,800 rpm 350 mm 30 mm 1 Vector 6 mm, Tk 42 mm - 120 mm pneumatic, pneumatic 100 mm, 160 mm manüll, 6-fold slot spindle [...Technical data truncated]
AD-ID: A404709
More Infos click here
___________________________________________________________________________________
Tap gumption - and Schlitzmaschine , Festo, ZA 101, , HR-REF-2114 kind of machine: Tap gumption - and Schlitzmaschine manufacturer: FESTO type: ZA 101 weight approx.: 800 kg of measures approx.: L (mm): 1,300 B (mm): 1,700 H (mm): 1.550 technical data: - Table displaceable - engine performance buzz saw 1.85 KW - engine achievement milling cutter 2nd, 3 KW - 1 spindle - stretch-hears 140 mm - diameter 40 mm - attack swivelling - suction connection 200 x 100 mm condition: very well, little run price: 2.000, - euros net location: North-Rhine/Westphalia availability off: immediately shipping equipment locally: available The trading firm Ravensberg is a machine broker. They buy machines directly with us of the owner. For buyers no commissions develop. When desired we organize machine transport. Mistakes in the offer remain reserving.
AD-ID: A438681
More Infos click here
___________________________________________________________________________________
umfaelzautomat, hemag, , , 1 hubspindel about 4 kw 1 rigid spindle about 5 kw 10000 40 mm extended table was used for large fensterbau to feed 10000 / min
AD-ID: A271430
More Infos click here
___________________________________________________________________________________
Spraying tunnel, SCHIELE, IMPREGMAT VM MINI, Opening width mm: 200; Thickness max mm: 40; Distance between rolls: 200; Number of nozzle units: 2; Nozzles per nozzle unit: 2; Length of infeed roller table mm: 1.000; Compressed air pressure bar: 3; Total connection kW: 0,55; Weight kg: 250; Feed max m/min: 25; Stainless steel case: Yes; Require,
AD-ID: A419639
More Infos click here
___________________________________________________________________________________
889 Tool for window production , OPPOLD, IV 54/68/80 Holz-Holz/Alu, , From machinery sales (excluding sales of machine tools), we can offer the POS. 1 Oppold window tool set wooden aluminium IV 54/IV 68/IV 80 (turning knife), including Oppold tool for double glazing (DV) see photos steel cupboard. Tools went on Weinig UC-matic. POS. 2 Oppold tool IV 68 wood + Features IV to 78 wood (the completeness can not be guaranteed!) Umfälzwerkzeug No! Tools went on Weinig [...Technical data truncated]
AD-ID: A458961
More Infos click here
___________________________________________________________________________________
Umfälzautomat mit Werkzeug und Absaugung, Gubisch, UF3, , Umfälzautomat Gubisch UF 3 (Built in 1994) electronically. Control (3 spindles d = 50mm with 3-speed hub) with koplettem You Fix window tool equipped HM - Top state small business
AD-ID: A458458
More Infos click here
___________________________________________________________________________________
Zapfenschneidmaschine, Okoma, SF3 S, , Zapfenschneidmaschine Okoma machine tool SF3 Type S with Leitz You Fix (spindle with 3-speed hub) - Top state small business
AD-ID: A458459
More Infos click here
___________________________________________________________________________________
window production machine, WEINIG, Unicontrol 10-5, WEINIG window machine
type UNICONTROL 10/5, year 1990
mach.-no. 031-644
electromotive length fence:
• with electr. digital display
• tiltable l/r 60° for studio windows
crosscut saw:
• motor size 3,0 kW
• rpm 2800
• spindle-Ø 40 mm
• max. saw blade-Ø 350 mm
• pneum. switched to 4-fold revolver fence
individual adjustable
• cutting line laser
• suction socket Ø 80 mm
tenon- and slott spindle: (UNITEC)
• motor size 11,0 kW
• rpm 3000
• spindle-Ø 50 mm
• max. tool-Ø 320 mm
• max. tool height at the spindle 600 mm
• max. 6 tools
• spindle strokeb 5 x 100 mm
• suction socket Ø 160 mm
1. profil spindle: (UNIVAR)
• motor size 11,0 kW
• rpm 6000
• spindle-Ø 50 mm
• max. tool-Ø 232 mm
• max. tool height at the spindle 285 mm
• max. 3 tools at the spindle
• spindle stroke 2 x 95 mm
• left/rigth spindle rotation
• suction-socked Ø 160 mm
horizontal spindle - groove spindle:
• motor size 2,2 kW
• spindle-Ø 40 mm
• max. tool height at the spindle 13 mm
• max. tool-Ø approx. 110 mm
• suction socket Ø 80 mm
2. profil spindle: (UNIVAR)
• motor size 11,0 kW
• rpm 6000
• spnidle-Ø 50 mm
• max. tool-Ø 232 mm
• max. tool height at the spindle 285 mm
• max. 3 tools at the spindle
• spindle stroke 2 x 95 mm
• suction-socket Ø 160 mm
horizontal spindle - glas strip saw:
• glas strip support
for 18mm glas strip
• motor size 2,2 kW
• 2-fold switched depth fence
• max. tool-Ø approx. 110 mm
• suction socket Ø 80 mm
fitting cutting spindle:
• motor size 2,2 kW
• Spindel-Ø 40 mm
• max. tool height at the spindle 125 mm
• max. tool-Ø 210 mm
horizontal spindle - 2. groove spindle:
• motor size 2,2 kW
• spindle-Ø 40 mm
• max. tool height at the spindle 13 mm
• max. tool-Ø ca. 110 mm
• suction socket Ø 80 mm
horizontal spindle down:
• motor size 5,5 kW
• spindle-Ø 40 mm
• max. tool length at the spindle ca. 125 mm
• max. tool-Ø approx. 210 mm
• monitor control
• double part production
• Rücklauffördereinrichtung 1 Mann-Bedienung
power:
- approx. 60 - 80 pieces/h
at lenght of average workpiece 1200 mm
- at double piece production approx. 60% increased
performance with same parts
contain in the scope of supply:
• LEITZ window tool set DUFIX IV 68
+ LEITZ addition tools IV 68 HOLZ/ALU
For this machine wie can offer
window tool set IV 78, too.
Technical data by reservation!
,
AD-ID: A386333
More Infos click here
___________________________________________________________________________________
Narrow belt sander, MAWEG, Saturn D, - sanding width 200 mm
- 2 sanding aggregates: 1 top + 1 botoom
- min. sanding length 100 mm
- workpiece thickness max. 150 mm
- feed rate 7 m/min
- 2 brushes
- oscillation,
AD-ID: A348526
More Infos click here
___________________________________________________________________________________
5185 Window production line, WEINIG, KOCH, Fensterlinie, !!! Technical description in RUSSIAN, more machine pictures as well as machine videos - if available - at the end of this description as attached files !!!
# 5185 used Weinig UC-Matic window line with integrated Koch boring machine
---------------------------------------------------------------------------------
Line consiting of:
Pos. 1: entrance transport system
Pos. 2: automatic delivery, feeded roller belt, height-controlled pneumatically
Pos. 3: Weinig tenoning machine Unitec 10/1
- cut-off saw electronically with laser lighter for recognizing saw cut:
- Aggregate for roundings from bottom side
- 1. tenoning spindle, 640 mm length, NC-axis axial, variable adjustable
- 2. tenoning spindle, 640 mm length, NC-axis axial, variable adjustable
- 3. tenoning spindle, 320 mm length, CNC-axis axial and radial, variable adjustable
Pos. 4: transport belt
Pos. 5: Exit-transport of tenoning part
Pos. 6: KOCH processing centre Typ B-5000
Machine equipped for single-sided horizontal and vertical boring and milling processings in automatic window lines
Pos. 7: transport system between boring processing and profiling processing
Pos. 8: transport belt
Pos. 9: WEINIG profiling machine UNIVAR 10
- 1. profiling spindle, length 320 mm, CNC-axis axial and radial, variable adjustable
- 2. profiling spindle, length 400 mm with outboard bearing, CNC-axis axial and radial, variable adjustable
- 3. profiling spindle, length 400 mm with outboard bearing, CNC-axis axial and radial, variable adjustable
- grooving spindle horizontal top
- 4. profiling spindle, length 400 mm with outboard bearing, CNC-axis axial and radial, ariable adjustable
- grooving spindle vertival right s, length 160 mm, CNC-axis axial - grooving spindle from bottom side, length 125 mm, CNC-axis axial - grooving spindle horizontal top
Pos. 10: transverse transport to 2nd proccessing cyclus
Pos. 11: Exit-transport system - end of line
Option: window tools on request!
(technical details according to manufacturer - without guarantee!)
,
AD-ID: A459884
More Infos click here
___________________________________________________________________________________
Glass saw bar / sub-floor cutters , Wegoma, TS 250, , Engine: 0.75 KW 2800 rpm. Saw blade: 250 mm with a roller track
AD-ID: A459442
More Infos click here
___________________________________________________________________________________
1528 Boring and dowel inserting machine, KOCH, WINDOOR 510, # 1528 KOCH processing center Typ WINDOOR 510
----------------------------------------------------------------------------------------
Work piece dimensions:
- length: 200 - 3500 mm
- width 30 - 200 mm
- thickness: 30 - 100 mm
- Machine equipment with 2 working areas for the lngth processing and 2 working areas for the face-end processing.
- 2 work pieces can be put in independend of each other.
- Working height is 900 mm.
Machine basic equipment:
- with horizontal boring unit
- with boring support in borinf socket
- with glue giving and inserting of dowels
- with electronic surveillance of glue ELC
- with glue high pressure pump 15:1
- with 1 vibrating conveyor
- central lubrication
- CE-package
- KOCH Numeric with 3 NC-axis (X, Y, Z)
- Positionning control with PC
- Computer Pentium CPU
- Operating system Windows NT
- VGA Grafikkarte
- 15 Zoll VGA-Monitor
- serielle und parallele Schnittstelle
- Schnittstellenbeschreibung
- 1 floppy disk FD 3,5 Zoll, 1,44 MB
- 1 hard drive
- Phone modem for diagnosys of errors
- With keyboard, all orders and engine control through monitor
- The pc control is equipped with a "Touch Screen" for input of all functions
- Software is prepared vor online-connection
Characteristic of the processing units
-----------------------------------------------------------------------------------
1 horizontal borining head with 3 single choosable boring spindles
--------------------------------------------------------------------------------------------------
- all spindle are turnng right way, boring support in clamping unit
- boring rpm: 4300 Upm
- boring spindle stroke 100 mm
f.e. for for doweling borings for window and door pieces, "closing sheet metal" borings for marking, montage hole borings
- 3 Spiralbohrer HSS
1 horizontal boring unit with 1 boring spindle and fix angle position 7°
---------------------------------------------------------------------------------------------------
- for f.e. sash borings
- boring support in clamping unit
- boring rpm: 4300 Upm
- boring engine: 0,75 KW, boring stroke 150 mm
- 1 Spiralbohrer
1 x automatic tilting on 2 angles 7° and 15°
--------------------------------------------------------------------------------------------------
1 vertical boring head with 5 single choosable boring spindles:
--------------------------------------------------------------------------------------------------
- All spindles are turning right way..
- boring support in clamping unit.
- Boring rpm: 4300 Upm.
- Boring spindle stroke 100 mm,
f.e. for for doweling borings for window and door pieces, "closing sheet metal" borings for marking, montage hole borings
- 5 Spiralbohrer HSS
1 vertical milling unit for profile changing millings
--------------------------------------------------------------------------------------------------
- "closing sheet metal " millings (4 mm Falzluft)
- milling engine: 3 KW, 18000 Upm., rpms adjustable,
- milling support in clamping unit,
- 1 HSS-Schicht-Schrupp-Fräser
1 horizontal milling unit für Schließkästen
--------------------------------------------------------------------------------------------------
- Schließblechfräsungen
- milling egine 3 KW, 18000 Upm, rpms adjustable,
- milling support in clamping unit,
- 1 HSS-Schicht-Schrupp-Fräser
1 static frequency changer,
--------------------------------------------------------------------------------------------------
engine rpms adjustable veriable up to 18000 Upm
Characteristic of the glue giving unit and the doweling inserting unit:
--------------------------------------------------------------------------------------------------
- 1 doweling single tool
- dowel diameter: 8 mm
- dowel length: 60 mm
- Dübelausstand: variabel
- Dividing: as boring piture
- dowel length +/- 1 mm
- dowel diameter: + 0,1/-0,2 mm
ELECTRONIC GLUE SURVEILLANCE ELC
--------------------------------------------------------------------------------------------------
Before the glue valve the control instrument is installed. With each clock rate (glue splash) the glue river is measured. If no glue is squirted, the machine interrupts its clock rate and indicates at the switchgear cabinet the glue valve concerned.
1 x controlling mirror for vibrating conveyor
(techncial details according to manufacturere - withotu guarantee!),
AD-ID: A313664
More Infos click here
___________________________________________________________________________________
Umfaelzautomat with double stroke, Saomad, (6383), , uses, year of construction
1988, machine NR. 726 with glass border saw, pneumtisch steered,
control console above with electrical announcements, 10 KW, double
stroke for triple werkzeugbestueckung, long table approx.. 2500 mm
with extendable framework edition inclusive Samco feed apparatus with
7 roles, 2 speeds, tool diameter min. approx.. 270 - 280 mm, spindle
50 mm D, stretching height 280 mm, cyclic testing 0.5/100 mm, right
and left notice cheek over 5 gun notices all data without guarantee!
Price from stock 97447 Gerolzhofen.
AD-ID: A244715
More Infos click here
___________________________________________________________________________________
1575 Outside profiling machine, GUBISCH, CF 2, 1 GUBISCH - CENTROMAT zum Längsprofilieren und Umfälzen
von Fenster und Türen, Typ CF 2
Schwenkbare Rahmenauflage bis 650 mm
1. Profilfräseinheit
Gegelauf
Gleichlauf mit Eintauchautomatik zum Umfälzen einsetzbar
Motorleistung inkl. Motorbremse 9,2 KW
Spindeldrehzahl 6000 U/min.
Flugkreisdurchmesser 240 mm max.
Nulldurchmesser der Werkzeuge 140 mm max. min. 112 mm
Nullhöhe 10 mm
Spindeldurchmesser 50 mm
Spindelnutzlänge 300 mm
Horizontalhub pneumatisch 50 mm
Vertikalhub pneumatisch fix für 3 Werkzeugsätze 2 x 100 mm
Späneabsaughaube mit Absaugstutzendurchm. 140 mm
2.Profilfräseinheit
Gegenlauf
Motorleistung inkl. Motorbremse 9,2 KW
Spindeldrehzahl 6000 U/min.
Flugkreisdurchmesser 240 mm max.
Nulldurchmesser der Werkzeuge 140 mm max. min. 112 mm
Nullhöhe 10 mm
Spindeldurchmesser 50 mm
Spindelnutzlänge 300 mm
Horizontalhub 50 mm
Vertikalhub pneumatisch fix für 3 Werkzeugsätze
Vertikalhub 2 x 100 mm
Späneabsaughaube mit Absaugstuzendurchm. 140 mm
3. Profilfräseinheit
Gegenlauf
Motorleistung inkl. Motorbremse 9,2 KW
Spindeldrehzahl 6000 U/min.
Flugkreisdurchmesser 240 mm max.
Nulldurchmesser der Werkzeuge 140 mm max. 112 mm min.
Nullhöhe 10 mm
Spindeldurchmesser 50 mm
Spindelnutzlänge 300 mm
Horizontalhub 50 mm
Vertikalhub pneumatisch fix für 3 Werkzeugsätze
Vertikalhub 2 x 100 mm
Späneabsaughaube mit Absaugstuzendurchm. 140 mm
4. Spindel vertikal rechts Beschlagspindel
Spindeldurchmesser 40 mm
Klemmlänge 140 mm
Flugkreisdurchmesser 200 mm
Leistung 2,2 KW
Drehzahl 6.000 U/min.
Vertikalhub eine feste Position
Nullhöhe 10 mm
Horizontalhub pneumatisch gesteuert
Vorschub
Motorleistung 0,75 KW
Vorschubgeschwindigkeit 6 m/min.
Vorschubwalzendurchmesser 100 mm
Walzenabstand im Bereich der Bearbeitungsaggregate 110 mm
im Bereich des Einzugs 160 mm
Vorschubwalzen einzeln schräg zum Anschlag einstellbar
Vertikale rechte Anschläge
Höhe 85 mm
Anschläge für 1 mm Spanabnahme eingestellt
Anschlag 2 und 3 taktbar
SPS Steuerung
Elektronische freiprogrammierbare Funktionsabläufe
100 Kombinationsprogramme
bis zu 10 Einzelprofilvarianten/Bearbeitungschritte
sind pro Kombinationsprogramm abspeicherbar
Bedientableu mit Leuchtdrucktaster zur einfachen
Ablaufprogrammierung am Tableu
1. Spindel Gleich- und Gegenlauf
Eintauchautomatik im Gleichlaufbetrieb
Werkstückabmessungen - Fräseinheit
Länge: min. 220 mm + Zapfen
Breite: min. 42 mm, max. 200 mm
Dicke: min. 42 mm, max. 80 mm
Umfälzeinheit:
Rahmenlänge: min 400 mm
Technische Anschlussdaten
Druckluftanschluss 3/8 Zoll, 8 bar
Druckluftverbrauch ca. 18 NL/min.
Absaugluftmenge 98 qm/min.
Absaugluftgeschwindigkeit 32 m/sec.
Betriebsspannung 380 Volt, 50 Hz.
Stromanschlusswert gesamt 30,9 KW
Option: 1 Ayen Olivenbohrgerät - siehe Nr. 1576
(techn. Daten lt. Hersteller - ohne Gewähr !),
AD-ID: A313912
More Infos click here
___________________________________________________________________________________
1305 Olive boring machine, GOETZINGER, OBM, Olive boring machine
1,3 KW
table dimensions 500 x 300 mm
table height 835 mm
exhausting connection 50 mm
je eine Anschlagschiene rechts und links
mit je 7 Klappanschlägen
(techn. Daten lt. Hersteller - ohne Gewähr !),
AD-ID: A313755
More Infos click here
___________________________________________________________________________________
1588 Rollenbahn , FEDERHENN , Rollenbahn , 6 pcs. roller conveyor:
3 pcs
length 4000 mm
width 800 mm
height 2000 mm
3 pcs
length 3000 mm
width 800 mm
height 2000 mm ,
AD-ID: A463577
More Infos click here
___________________________________________________________________________________
673 Rollenbahn , RUCHSER , RU-Rollenbahn , , working length 6000 mm working width 500 mm reel width 500 mm x L mass loading wxh 3200x1150x1850 mm Weight 160 kg roller track 4 m + 2 m extension (technical information according to the manufacturer - without guarantee!)
AD-ID: A463580
More Infos click here
___________________________________________________________________________________
1244 Transport system, ARTEC, Werkstueckrueckfuehrung, 1 automatische Werkstückrückführung mit Schwenkband,
Arbeitshöhe 980 mm, optisches Auge Balluf, rechts-
schwenkend ca. 37°,
AD-ID: A319290
More Infos click here
___________________________________________________________________________________
1401 Glazing beat sww, STRIFFLER, 2750, Double glazing strip saw:
2 engines each 1,1 KW
combined worki piece clamping
Stops for short workpieces with supprt
manual tilting unit (up to 20 gedrees into negative)
length digital viewable 2.200 mm
2 saw blades HM 250x2,7/2,0 mm
technical details according to manufacturer - ,
AD-ID: A313722
More Infos click here
___________________________________________________________________________________
1717 4 side moulder, WEINIG, Unimat 23E - Steuerung/control, !!! Technical description in RUSSIAN, more machine pictures as well as machine videos - if available - at the end of this description as attached files !!!
# 1717 Weinig Unimat 23 E, Baujahr/built in 2005
......................................................................................................................................
Technical details summary
(please ask for possibly more included equpment)
......................................................................................................................................
In general
......................................................................................................................................
> working width: 230 mm
> working height: 120 mm
> number of spindles: 6 Stk.
> planning table 2500 mm
> feed motor: 4 kW
> feed speed: 5-24 m/min
> total performance: 44 kW
> dimensions when installed: 5100 x 2010 x 2010 mm
> dimensions: 5100 x 2010 x 2010 mm
> weight, approx. 4200 kg
Spindle arrangement
......................................................................................................................................
> spindle 1: bottom
> spindle 2: right
> spindle 3: left
> spindle 4: top
> spindle 5: top
> spindle 6: bottom
Spindle description
......................................................................................................................................
> spindle 1: 4 kW, 6000 rpm, 40 mm diameter
> spindle 2: 11 kW, 8000 rpm, 40 mm diameter
> spindle 3: 8000 rpm, 40 mm diameter
> spindle 4: 7,5 kW, 8000 rpm, 40 mm diameter
> spindle 5: 7,5 kW, 8000 rpm, 40 mm diameter
> spindle 6: 7,5 kW, 8000 rpm, 40 mm diameter
More features
......................................................................................................................................
> cardan drive
> possible to divide out of glazing bead
> electronic positionning of spindle no.: 3,4,5
> number of feeded rollers in table: 1
> control: Siemens OP 7, 3 Achsen-Positionierung
If the technical characteristics of this machines donnot fit with your requirements, please get in contact with us. Our longtime experienced team is looking forward to support you in technical adaptions or in finding a suitable machine for you!
Technical details according to manufacturer - without guarantee!
,
AD-ID: A459873
More Infos click here
___________________________________________________________________________________
1083 Order picking carriage, RUCHSER, RU-FKW-1600, , 2 Ruchser car RU-HFC-1600
AD-ID: A459288
More Infos click here
___________________________________________________________________________________
Tap cutter, Hirsch FWG, LQP 180 (13818), , uses, year of construction approx.. 1992,
Topzustand, a little run, for the transverse's treatment of mini tines
and account profiles, conversion to +70/ 70 bevel, longitudinal
dimension at the notice, wood tension with bridge 8 bar manual feed of
the sawing and milling car, electrical brake assembly, wood strength
max. 80 mm of wood strength min. 10 mm of depth of profile max. 50 mm
sawing aggregate: - three-phase motor 2.2 KW - spindle number of
revolutions 2800 U/min. - horizontal adjustment 50 mm milling
aggregate: - three-phase motor 4 KW - spindle number of revolutions
6000 U/min. - spindle length 100 mm usable - spindle diameter 40 mm -
tool diameter 180 mm - weight 850 kg - mass 1600 x 1450 mm option: -
digital indicator angle division of the angle announcement 1/10
inclusive mini tine drill all data under reservation. Stock location
97447 Gerolzhofen
AD-ID: A296493
More Infos click here
___________________________________________________________________________________
1585 Glazing and control press, FEDERHENN WORKER, Verglasungspresse, stroke height 500 mm
working width 300 mm
working height 2300 mm
length 4200 mm
width 1000 mm
height 2150 mm
The complete glazing line you find under stock no. 715
(technical details according to manufacturer - without guarantee!),
AD-ID: A459224
More Infos click here
___________________________________________________________________________________
Forming and slot automat/Doppelendprofiler, Gubisch, F 7, , form - and slot
automat 3 lift links on the right of 2 lift links on the left of
Doppelendprofiler work width: 3000 mm of clock machine with taps and 2
forming spindles
AD-ID: A302399
More Infos click here
___________________________________________________________________________________
1745 Window production centre, WEINIG, Unicontrol 10 CNC Spindeln, !!! Technical description in RUSSIAN, more machine pictures as well as machine videos - if available - at the end of this description as attached files !!!
# 1745 used processing line for wooden window production, consisting of:
--------------------------------------------------------------------------------------------------------
Pos. 1:
Weinig Unitech 10 + Univar 10 with CNC-spindles
......................................................................................................................................
Production capacity in 8 hours, approx. 70 pcs.
Technical details summary
(please ask for possibly more included equipment)
......................................................................................................................................
Cut-off saw
......................................................................................................................................
> cut-off saw electronically, horizontal variable adjustable: yes
> number of tools: 1 pcs.
> number of revolutions: 2800 rpm
> spindel diameter: 40 mm
> tool diameter max.: 400 mm
> engine: 3 kW
> laser lighter for recognizing saw cut: yes
Aggregate for roundings
......................................................................................................................................
> position: top + bottom
Length stop
......................................................................................................................................
> length: 3600 mm
> length stop electronically: yes
1st Tenoning spindle
......................................................................................................................................
> number of tools: variabel, CNC-gesteuert
> length of spindle: 640 mm
> spindle stroke vertical: variabel, CNC-gesteuert
> number of revolutions: 2800 rpm
> spindle diameter: 50 mm
> tool diameter max.: 320 mm
> engine: 15 kW
2nd tenoning spindle
......................................................................................................................................
> number of tools: variabel, CNC-gesteuert
> length of spindle: 640 mm
> spindle stroke vertical: variabel, CNC-gesteuert
> number of revolutions: 2800 rpm
> spindle diameter: 50 mm
> tool diameter max.: 320 mm
> engine: 15 kW
1st profiling spindle:
......................................................................................................................................
> position: vertical right
> number of tools: variabel, CNC-gesteuert
> length of spindle: 320 mm
> spindle stroke vertical: variabel, CNC-gesteuert
> number of revolutions: 6000 rpm
> spindle diameter: 50 mm
> tool diameter max.: 232 mm
> engine: 11 kW
2nd profiling spindle:
......................................................................................................................................
> position: vertical right
> number of tools: variabel, CNC-gesteuert
> length of spindle: 320 mm
> spindle stroke vertical: variabel, CNC-gesteuert
> number of revolutions: 6000 rpm
> spindle diameter: 50 mm
> tool diameter max.: 232 mm
> engine: 11 kW
3rd profiling spindle:
......................................................................................................................................
> position: vertical right
> number of tools: variabel, CNC-gesteuert
> length of spindle: 320 mm
> spindle stroke vertical: variabel, CNC-gesteuert
> number of revolutions: 6000 rpm
> spindle diameter: 50 mm
> tool diameter max.: 232 mm
> engine: 11 kW
4th profiling spindle:
......................................................................................................................................
> position: vertical right
> number of tools: variabel, CNC-gesteuert
> length of spindle: 320 mm
> spindle stroke vertical: variabel, CNC-gesteuert
> number of revolutions: 6000 rpm
> spindle diameter: 50 mm
> tool diameter max.: 232 mm
> engine: 11 kW
5th profiling spindle:
......................................................................................................................................
> position: vertical right
> number of tools: 4 pcs.
> length of spindle: 160 mm
> number of revolutions: 5850 rpm
> spindle diameter: 40 mm
> tool diameter max.: 210 mm
> engine: 3 kW
6th profiling spindle:
......................................................................................................................................
> position: horizontal top
> length of spindle: 40 mm
> number of revolutions: 5850 rpm
> spindle diameter: 40 mm
> tool diameter max.: 130 mm
> engine: 3 kW
7th profiling spindle:
......................................................................................................................................
> position: horizontal top
> length of spindle: 40 mm
> number of revolutions: 5850 rpm
> spindle diameter: 40 mm
> tool diameter max.: 130 mm
> engine: 3 kW
More features:
......................................................................................................................................
> possible to use online: yes
> possible to divide out of glazing bead: yes
> double piece package: yes
> back transport system for 1 man operating: yes
> display control: yes
> studio window equipment: yes
> electronical angle display for studio windows: yes
> electric/automatic angle adjustment of tenoning table,
integrated in display control yes
> varibale / CNC radial adjustment of profiling spindle no. 3 and 4
> control: PC-Steuerung / Nexus
(technical details according to manufacturer - without guarantee!),
AD-ID: A459825
More Infos click here
___________________________________________________________________________________
1223 Transport system, NEUMANN, RF 903 15, Einsetzbar nach Kehl- Hobel- und Fräsmaschine
mit einer max. Vorschubgeschwindigkeit von ca. 22 m/min. Werkstück wird nach hinten abgeführt. Abmessungen: 3,25 m lang, 1,60 m breit
max. Förderbreite 1,15 m, blaue Auslaufrollenbahn 2,20 m lang, nicht angetrieben, Rollenbreite 170 mm
(techn. Daten lt. Hersteller - ohne Gewähr !),
AD-ID: A319307
More Infos click here
___________________________________________________________________________________
Angle plant , SCM, Method K, , Full operational in good condition available around August 2008 calling your pictures
AD-ID: A423072
More Infos click here
___________________________________________________________________________________
Window and Tuerenwerkzuegsatz , GOLD, SOFTLINE, , GOLD tool kit SOFT LINE for the
production of turning tilting windows and doors HW turret plates
execution, Z = 2 BG test EURO crease system also open-lying closing
plates 12mm falzluft rain rail property man Danube 22 F - TI fitting
crease 18 x 8 mm of threaded bush 50/40 mm bolts transverse's
treatment zero-diameter 300 mm: Window frame slot window frame tap
above window frame tap down wing slot wing tap longitudinal's
treatment zero-diameter 111.5 mm: Window frame inside laterally and
above window frames inside down crosswise wing interior profile
without border wing external profile laterally and above wing external
profile left central crease Kantengetriebefraeser glass border first
from separation on the table milling cutter Glasleistenfraeser with
saw for border shaping Profilkopf with saw to rounding and Austrennen
of the glass border off
AD-ID: A387027
More Infos click here
___________________________________________________________________________________
1655 4 side moulder, WEINIG, Profimat 23, , four Planing and profiling machine, tables, attacks ------------------------------------ ------------------- Heavy machine body, verwindungsfrei and vibration. Tabletops and attacks are sanded and the operator side on the flight circle tool set. Tabletops easily interchangeable. To reduce noise, the tabletops before and after 1 serrated lower spindle. Tabletop before [...Technical data truncated]
AD-ID: A460057
More Infos click here
___________________________________________________________________________________
1490 Outside profiling machine, Okoma, UF 3 EG, Nr. 1490
1 OKOMA-Umfälzautomat Modell UF 3 EG
ENERGIEDATEN Betriebsspannung : 3 Phasen, 380 V, 50 Hz.
Druckluft : Luftbedarf : 13 NL/min. Betriebsdruck : 8 bar aufber. Luft : nach Pneurop 6611
PROFILSPINDEL 1
Spindelanordnung : rechts Leistung 11 kW Drehzahl 7000 UpM
Drehrichtung : Gleich- u. Gegenlauf Spindeldurchmesser 40 mm Nutzlänge 252 mm
Werkzeugdurchmesser max. 230 mm
U-Bewegung der Profilspindel
Positionierung vertikal Antrieb : Pneumatikzylinder 130 mm Takt für 2 Werkzeugpositionen
Positionsgeber : Endschalter
Positionierung horizontal Antrieb : Pneumatikzylinder Vor-Zurück Positionsgeber : Endschalter
Eintauchautomatik : Eintauchgeschwindigkeit regulierbar zum ausrißfreien Umfälzen
- Schutz- u. Absaughaube m. Anschlußstutzen 140 mm Durchm.
PROFILSPINDEL 2 Spindelanordnung : rechts Leistung 11 kW Drehzahl 7000 UpM Drehrichtung : Gegenlauf
Spindeldurchmesser 40 mm
Nutzlänge 252 mm Werkzeugdurchmesser max. 230 mm
U-Bewegung der Profilspindel
Positionierung vertikal Antrieb : Pneumatikzylinder 130 mm Takt für 2 Werkzeugpositionen
Positionsgeber : Endschalter
Positionierung horizontal
Antrieb : Pneumatikzylinder Vor-Zurück Positionsgeber : Endschalter
Schutz- u. Absaughaube mit Anschlußstutzen 140 mm Druchm.
PROFILSPINDEL 3 Spindelanordnung : rechts Leistung 11 kW Drehzahl 7000 UpM Drehrichtung : Gegenlauf
Spindeldurchmesser 40 mm
Nutzlänge 252 mm Werkzeugdurchmesser max. 230 mm
U-Bewegung der Profilspindel
Positionierung vertikal Antrieb : Pneumatikzylinder 130 mm Takt für 2 Werkzeugpositionen
Positionsgeber : Endschalter
Positionierung horizontal
Antrieb : Pneumatikzylinder Vor-Zurück Positionsgeber : Endschalter
Schutz- u. Absaughaube mit Anschlußstutzen 140 mm Druchm.
BESCHLAGFRÄSGERÄT - EG Spindelanordnung rechts Antrieb: Drehstrommotor 3 kW Drehzahl 6000 UpM Spindeldurchmesser 30 mm Nutzlänge 47 mm
Positionierung vertikal : keine
Positionierung horizontal Antrieb: Pneumatikzylinder Vor-Zurück
Positionsgeber: Endschalter (nur hinten)
Schutz- und Absaughaube mit Anschlußstutzen 80 mm Durchmesser
ANSCHLAG 1. Anschlag : vor Spindel 1 manuelle Spanabnahme Schnellverstellung üb. Parallelogramm
2. Anschlag : zwischen Spindel 1 und 2 Spanabnahme : pneumatisch einstellbar
3. Anschlag : nach Spindel 2 Festanschlag
VORSCHUB Vorschubgeschwindigkeit stufenlos 3 - 21 m/min. Rollenabstand von Achse zu Achse 130 mm Rollendurchmesser 110 mm Rollenbreite 50 mm Vorschub wegschwenkbar
mit pneumatischer Arbeitswegsteuerung
AUFLAGESCHIENE ZUM UMFRÄSEN : Schienenlänge : ca. 3000 mm Verstellbereich nach vorn : ca. 100 - 600 mm
Tischverlängerung links mit Olivenbohrgerät ELEKTRISCHE STEUERUNG Speicherprogrammierbare Steuerung: Siemens-Elektronik-
PC-Steuerung, 30 Programme, 380 V., 50 Hz.
Leistungsteil : Siemens S 5 Berührungslose Endschalter
(techn. Daten lt. Hersteller - ohne Gewähr !),
AD-ID: A267282
More Infos click here
___________________________________________________________________________________
Umfälzautomat , WEINIG, Univar 10 , , Univar 10 solo with 2 Hubspindeln right Beschlagfräsaggregat spindle D = 40x125 mm Univar 3-spindle tools, stroke = 2x95 mm, D = 50x285 mm synchronized 3-spindle tools, stroke = 2x95 mm, D = 50x285 mm Fräsanschlag before Univar - Spindle adjustable voltage 380 V, 50 Hz spindle motor Univar increased to 11 kW motor spindle synchronization increased to 11 kW Umfräsablauf programmable 24 V
AD-ID: A445686
More Infos click here
___________________________________________________________________________________
700 4 side moulder, WEINIG, Profimat+Uniplan+Transport, Weinig Moulding line consisting of:
Pos. 1 Weinig foursideplaner Profimat 23 E:
------------------------------------------------------------------------------------
# 1188 Weinig Profimat 23 with ATS-control and mobile spindle ......................................................................................................................................
Technical details summary (please ask for possibly more included equpment) ...................................................................................................................................... In general ...................................................................................................................................... > working width: 230 mm > working height: 120 mm > number of spindles: 6 Stk. > planning table 2000 mm > feed motor: 3 kW > feed speed: 5-24 m/min > total performance: 39 kW > dimensions: 3850 x 2000 x 1600 mm > weight, approx. 3500 kg
Spindle arrangement ...................................................................................................................................... > spindle 1: bottom > spindle 2: right > spindle 3: left > spindle 4: right > spindle 5: top > spindle 6: glazing beam saw
Spindle description ...................................................................................................................................... > spindle 1: 4 kW, 6000 rpm, 40 mm diameter > spindle 2: 7,5 kW, 6000 rpm, 40 mm diameter > spindle 3: 6000 rpm, 40 mm diameter > spindle 4: 5,5 kW, 6000 rpm, 40 mm diameter > spindle 5: 4 kW, 6000 rpm, 40 mm diameter > spindle 6:glazing beam saw, 2,2 kW,
More features ...................................................................................................................................... > divide out of glazing beam: yes > mobile spindle for automatic width measuring and adjustment: yes
Pos. 2: Haberkorn transport belt
------------------------------------------------------------------------------------
Transport belt 3500 x 260 mm
height adjsutable (ca. 850 mm - 1000 mm)
variable feeded belt approx. 5-25 m/min.
Antriebsrollen galvanisch verzinkt, roller diameter 60 mm
Belt witht PU-Decke, 260 mm width
engine: 0,18 KW
Rollenabdeckung nach HGB
push-out of glazing strip
Pos. 3: Weinig hydro moulder Uniplan 23
------------------------------------------------------------------------------------
safety regulations after German guidelines
For the 2 side horizontal wood processing with 2 spindles.
Spindle arrangement: horizontal bottom and top.
The two horizontal spindles are provided with hydraulically strained
back supports, without axial adjustment. Inserted straightjointer at
both spindles.
Machine with continuous, chainless feed motion, equiped with
rubber rollers. Electrical high-low adjustment of the spindles with
mechanical digital display (SIKO). Feed motion roller pressure pneumatically. fences and desk tops not adjustably. Machine with steel table plates.
Machine is full covered and sound and dust shield are integrated.
Inclusive Interior lighting.
Electrical execution according to DIN VDE 0113, electrical equipment
of industrial machines EN 60204, International Electronical Commission
- 204 - 1.
The spindles that Weinig machine work with 7200 rpm.
Technical data
- Work width max.: 230 mm - work height min.: 15 mm of max.: 120 mm
- feed motion: 3 KW (4PS) horizontal spindles each 5.5 KW (7.5 HP) - feed speed, steplessly: 6 - 36 m/min. - number of revolutions of the spindles: 7200 rpm - spindle diameters: 50 mm - tool friction length: 230 mm - tool flight circle max.: 163 mm
Special equipment:
- Brake system for feed motion up to 5.5 KW (7.5 HP)
- spindle brakes, mechanically up to 7.5 KW
1. introdution roller clocked with photoelectric cell.
Radial adjustment of the two spindles with electroni