Veneer glueing machine , KUPER, FWJ 900, workspace 920 mm
feeder ca. 15 m/min.
veneer thickness ca. 0,4 - 2,0 mm
drive 0,18 kW engine
operating voltage 400 Volt, 50 Hz., 3 Ph.
total terminal 0,5 kW
, AD-ID: A441821 More Infos click here
Veneer Press, BÜRKLE, S 4, Number of cylinders 6; Number of levels 2; Platen length mm 2.550; Platen width mm 1.330; Heating top/bottom seperately Yes; Heating platens Electric; Presskraft Electro-hydraulic; Ausführung Upstroking press; Availablity Short-term, ex location customer!; In offer since 24-07-07; Condition Uncheck, AD-ID: A352099 More Infos click here
veneer glueing machine, KUPER, Typ FW 630, built ~ 1990, with glue thread, passage 630 mm, with foot switch, good condition.... now for only , AD-ID: A281679 More Infos click here
Veneer different roles, , Sorte U036 Mittelgrau und U0120, , see photo 1 range with 3 pieces rolls 900 mm wide (U036) and 1 pallet with 3 pieces roles 1300 mm (U036) and 1 piece of roll 1300 mm U120 AD-ID: A271758 More Infos click here
Veneer composition machine , Fisher + Rueckle, FL 728, , Veneer composition machine Fabr. Fisher + Rueckle, type flat steel bar 728 inclusive filling system tie-clip by type FSB-DS 295 and accessories veneer milling cutter and Beleimung Fabr. Hofer Price on request AD-ID: A443075 More Infos click here
Veneer building up machine veneer sticking machine , Kuper, 420, , Make Kuper type FW / Mini 420 overhang 420 mm thread electric heating table model space LxWxH approximately 660 x 630 mm x 460 mm .. AD-ID: A345734 More Infos click here
, Josting, EFS 3200, Tl.-Id. 2067120
cutting length 3200 mm
cutting height 100 mm
motor parallel stop, three-phase motor 0,12 kW
adjusting range of parallel stop 35-680 mm
with digital indicator, also for strip cutting
hydraulic pressure beam operation 4,0 kW
knife-beam hydraulically
accident-protection light curtain (double at the moment)
directive light
electrical connection 380 V, 50 cyc.
length 4400 mm
width 1750 mm
height 1850 mm
weight 3300 kgs
veneer saw, SCHEER, FM8 3100, • pneumatical pressure bar, length 3100 mm
• veneer-support-table size 3100 x 500 mm
• saw motor size 1,85 kW, rpm 2850
• suction motor size 0,37 kW, rpm 2800
• machine size (LWH) ca. 3745 x 800 x 1200 mm
• weight 400 kg, AD-ID: A424887 More Infos click here
Veneer press , Joos, Joos Basic 70, , New veneer press, never galauft. Working width 2500 x 1250 mm 1 floor electrical Press, 19 Kw AD-ID: A456133 More Infos click here
Furnierzusammensetzmaschine Kuper FW 420 , Kuper, FWM 630 ST, , Kuper Furnierzusammensetzmaschine; overhang 630 mm; for glue thread; machine, and in order "super state" AD-ID: A463571 More Infos click here
Kuper veneer building up machine type L.G. 1200 N , Kuper , FW 1200 N, , with standard heating III/K To building up veneers of approx. 0.4 - 3.0 mm. As sticking medium serves a special glue thread, which is laid on in zigzag or wave line by a heated Fadenfuehrer. Guaranteed joint, high adhesion and ultimate tensile strength seals also with strongly wavy veneers. When late injecting the Leimfaden is inward put. Sanding of the sticking of medium off is not necessary therefore. Particularly high feed speed, been suitable from there particularly more fuer extremely long veneer strips. Specific characteristics: --------------------------------- - twisting-free C-Stand-construction from steel - resistant polyurethane lacquer finish - Diskusscheibensystem with tolerance balance mechanism. - Separation bar with electrically steered compressor rod. - maintenance-free precision high speed transmission. - Engine with rule disk and brake clutch combination to the stepless regulation of feed speed. - polished Norosta workbench - air adjustment valve with service unit - chromium plated pressure roll - meter counters - electrically steered thread cutting off device - elektronsiche heater speed regulation - FR control - clear control panel with ammeter and - two steel transformers for stepless regulation of the amount of heat in the standing and driving. - 2 - Spulen-Halter with dust and UV light protection hood. Technical data: ---------------------------- Stand discharge: 1200 mm feed motion steplessly: approx. 30 - 60 m/min. Veneer thickness: approx. 0.4 - 3.0 mm drive: 0.55 KW engine, 380 V, 50 cycles per second, 3 pH total connected load: 1.5 KW air consumption: 2 NL/min. AD-ID: A337682 More Infos click here
Veneer scissors Hymmen , Hymmen, , , veneer Hymmen scissors manufacturer - cut length 2100 mm - Anchorage adjustable hand crank - adjusting the range of 25 - 700 mm - in good condition AD-ID: A455894 More Infos click here
Veneer building up line , Rueckle , , , Furnierzusammensetzlinie Make Rückle Bj 1982 consisting of: Vorlegebeschickungssystem format Clipper type AFN 34 H with gluing Zusammensetzmaschine type FZS veneer transport with edge reinforcement, Besäumeinrichtung and Abstapelung veneer Qürzusammensetzmaschine FZS 34 veneer requirement veneer strip length: 750 - 3,400 mm with Rändverstärkung / Besäumung : Min. 1500 max. 3,400 mm veneer strip strength: 0.4 - 1.5 mm depending v [...Technical data truncated] AD-ID: A406868 More Infos click here
Furnierschere , CASATI, 3100, , working length 3100 mm durchgreifender attack front and rear section edition joint bar gauge pneumatic light barrier AD-ID: A380202 More Infos click here
Joining and fine-cut saw , Scheer, FM 5-3100, , Machine no.: 72406 performance saw: 2.5 HP Absaugmotor: 0.5 hp average length: 3,100 mm diameter saw blade: 180 mm pneumatic Furnierandruck space B / T / H: approximately 3,750 / 1,500 / 1,200 mm AD-ID: A448232 More Infos click here
Furnierschere , Hymmen, AS 260, , 2600 mm OFF with electrical width notice safety
light barrier with 2 hand protection circuit AD-ID: A390904 More Infos click here
Kuper veneer final adhesive EMZ/2 , Kuper , EMZ/2, , with inserted III/K heating lacquer finish ral 1015 380 V, 50 cycles per second To the reciprocal final sticking together and Besaeumen of approx. 0.4 to 1.0 mm strong veneers. The veneers are entered transverse to the fiber into the machine. Serve two upper pressure rolls on promotion belts as lengthwise-lateral attack and ensure that the veneer carpet is right-angled inserted, stuck together and cut. At the two ends a straight-lined running Leimfaden is laid on, which stabilizes the veneer carpet and pulls wind tears together. Two inserted round measurers cut approx. 5 mm beside this Leimfaden the veneer edges parallel. Thus it is ensured that the Leimfaden is omitted with the format cut of the furnierten plates. The finished veneer carpets are absolutely parallel besaeumt, evenly long and can be destacked. Specific characteristics: - solid stand construction made of steel - resistant polyurethane lacquer finish - polished Nirosta Arbeitsflaeche - sticking station on the left of steplessly displaceable - variable-speed gear to stepless R gelung the drive speed - chromium plated 2 pressure rolls - of 2 electrically steered thread cutting off devices - air adjustment valve with service unit - 2 Besaeumaggregate with tool steel round measurers Technical data: ---------------------------- Work width: 410 - 2700 mm feed motion steplessly approx. 6 to 30 m/min. Veneer thickness: approx. 0.4 to 1.0 mm drive: 0.37 KW, 380 V, 50 cycles per second, 3 phases total connected load: 3.0 KW air consumption: 2 x 10 NL/min. inclusive collecting table for veneers. AD-ID: A335643 More Infos click here
Amitec VT25 lumber veneer slicer line, , Amitec VT25 lumber veneer slicer line, we have for sale sliced veneer line :
amitec VT25 veneer slicer (0,3-3mm thick veneer )
amitec VT13 roller veneer dryer 11m long
veneer knife grinder , goeckle
veneer guillotine
band sawmill ripsaw
all machines in very good condition
working, almost new, AD-ID: A379188 More Infos click here
Veneer building up machine , Kuper, FW/J, , stand discharge 800 n/m feed
motion constantly 15 m/min drive electrical motor 0.15 KW of operating
voltage 380 V total connected load 1,0KW weight 165 kg space
requirement approx. 1150x540x1350 mm AD-ID: A423850 More Infos click here
Veneer sticking machine , Kuper, FWJ 900, , veneer sticking machine Kuper
FWJ 900 stand discharge 900mm year of construction 1993 AD-ID: A408214 More Infos click here
luminous table, Kuper, LT, For the quality control of spliced veneers. An evenly illuminated inspection area is achieved by the funnel-shaped reflector shell in conjunction with an opaque glass panel. The electric equipment of the inspection table consists of: 1 fluorescent light tube and 2 built-in sockets.
illuminated surface: 1.380 x 630 mm
thickness opaque glass panel: 6 mm
shipping space: approx. 1,3 m³
colour: RAL 6011
Veneer jointing machine , Beck, , , HR-REF-1691 Maschinenart: veneer joining machine manufacturers: Beck Built: Unknown Weight: 70 kg approximately: L (mm): 1460 B (mm): 750 H (mm): 1200 Specifications: no technical Documents available Status: geplegt, operational (attachment guard defective) Price: 380, - Euro net Location: Rhein-Main Verladegerät spot: with mining, loading and transport are task of the buyer. The trading house Ravensberg organized, if necessary [...Technical data truncated] AD-ID: A348295 More Infos click here
Veneer sticking machine , Kuper, 400 mm, , 400 mm from termination of activities -
available starting from at the end of of June 2008 AD-ID: A436248 More Infos click here
Furnierzusammensetzmaschine Kuper FW 420 , Kuper, FW 420, , Kuper Furnierzusammensetzmaschine; overhang 420 mm; for glue thread; machine, and in order AD-ID: A463568 More Infos click here
Kantenanleimmaschine, ALTENDORF, Akzent V 31 Tischgeraet, , Offer number: HR-1200 Maschinenart REF: Kantenanleimer / edgebander Manufacturer: ALTENDORF Type: accent V 31 Built: 1991 Dimensions approximately: L.: 1,750 mm W.: 530 mm H.: 600 mm plus role-Teller: 600 mm table mass: 1,750 x 380 mm Weight: 135 kg feed: available piece thickness: 10 - 55 mm edge thickness: 0.4 - 1.0 mm Reel Disconnect max.: 0.8 mm wide piece min. 50 mm Werkst [...Technical data truncated] AD-ID: A307703 More Infos click here
Veneer-stick, Kuper, , , work area 1150 mm weight 530 kg of total width
2100 mm of overall height of 1350 mm/1700 mm AD-ID: A307774 More Infos click here
Joining and fine-cut Machine , SCHEER, FM 5-3100, , joining and fine-cut machine Fa Scheer type FM 5-3100 BJ about 75 length about 3 m, with Vorritzer on mobile metal frame AD-ID: A461035 More Infos click here
operational Furniersaege, SCHEER, FM 3 fuer 2.500 mm Furnierlaenge, , Offer number: HR-1333 Maschinenart REF: veneer saw Manufacturer: SCHEER Type: FM 3 machines no.: 161519 Built: Unknown Weight: 300 kg Standard mass approximately: - L = 3,200 mm - B = 1,000 mm - H = 1,500 mm connection: 380 V engine power: 1.5 kW motor speed: 2,820 rpm pressure beam delivery by hand veneer length max.: 2,500 mm diameter saw blade: 180 mm Other: rollbar (roles au [...Technical data truncated] AD-ID: A315037 More Infos click here
Veneer scissors , JOHN, FS VII, , veneer scissors FS VII Built in 1964 average length 2600 mm average height 100 mm Electric Setting the working height Electric Setting the working width (0.37 kW) AD-ID: A458847 More Infos click here
throat depth 1200 mm
working height 925 mm
material speed, with thread only approx. 10 – 45 m/min.
material speed, by butt gluing without
thread and combined with thread approx. 10 – 20 m/min.
main drive 1,1 kW
operating voltage, standard 380 V , 3 Ph + Mp, 50 Cycles
total connection 3,6 kW
glue thread heater III/K 160 W
air nozzle heater 1400 W
air consumption approx. 350 NL/min.
weight: 850 kg
space requirement 2,62 m x 1,97 m x 1,93 m
Funcion description:
The veneer is fed to the glue discs and the cut edges of the veneer are covered with PVAC glue. A blower heater is behind the glue station. Hot air is blown from this area onto the veneer edges out of many small nozzles. The hot air dries and activates the glue. The veneer with the glue covered edges are then joined in the splicer. Then the veneers are joined together with the aid of the discs, which rotate opposite to one another, and with pressure rolls. For an extra intensive gluing of the veneer sheets a glue thread can also be applied.
price on demand
***************
Pozycja Nr. 5434
Sklejarka furniru na styk Kuper
Model: FW/L 1200
grubosc forniru od 0,4 – 2 mm
min. dlugosc forniru 400 mm
wysieg ramienia 1200 mm
wysokosc stolu: 925 mm
predkosc posuwu przy laczeniu z nitka od 10 -45 m/min predkosc posuwu przy klejeniu na styk bez nitki, lub z nitka ok 10-20 m/min
silnik napedu 1,1 kW
napiecie robocze 380 V, 50 Hz
laczna moc przylaczeniowa 3,6 kW
zapotrzebowanie miejsca 2,62 m x 1,97 m 1,93 m
ciezar: 850 kg, AD-ID: A469513 More Infos click here
Veneer composition machine , Kuper, FW/J 900, , cargo stands out 920mm, veneer thickness of about 0.3 - 3mm, speed 15m/min, 380V / 0.45 kW about 185 kg weight, mass around 1350 x 500 x 1750mm, mobile, apparently did little in solid wood operations. AD-ID: A439217 More Infos click here
Furnierschere , Josting, EFS 2800, , schnittlaenge: 2,800 mm of light barrier safety
device (can be re-tooled) parallel guide stop with engine high-speed
adjustment arranging light to the clear marking of the cut line AD-ID: A427568 More Infos click here
Veneer sticking machine , Kuper, , , HR-REF-1487 kind of machine: Veneer sticking machine manufacturer: Kuper tension: 380 V condition: maintained/ready for use price: 1.150, - euros net location: Region Stuttgart shipping equipment locally: available Dismantling, loading and transport are task of the buyer. The trading firm Ravensberg organizes if necessary gladly the loading/transport of the commodity. AD-ID: A328041 More Infos click here
Veneer building up machine , Kuper, FW Mini 420 (18349), , Make Kuper type used FW / Mini 420 overhang 420 mm thread electric heating table model space LxWxH approximately 660 x 630 mm x 460 storage 97447 Gerolzhofen All information is subject to change! AD-ID: A332838 More Infos click here
Veneer sticking machine , KUPER, FW/J 900, , to width glue of veneer by means of
leimfaden technology and equipment: Discharge: 920 mm of veneer
strength: 0,4 - 2 mm feed motion: approx.. 15 m/min drive brake motor:
0.18 KW of air heating of connections: Electrical connection: Total
total: 0.5 KW of tension: 380 V frequency: 50 cycles per second of
security: 6 A pneumatics: Compresser air bleed port: 9 DN air
consumption: 80 l/min. operating pressure: 6 bar of dimensions of the
machine: 2140 x 780 x 1400 mm weight: 500 kg AD-ID: A382439 More Infos click here
VENEER BUILDING UP MACHINE/VENEER STICKING MACHINE , KUPER, FWJ 900, , stands out cargo 900 mm electric heating wire feed about 15 m / min. Veneer thickness 0.4 - 2 mm AD-ID: A342916 More Infos click here
Veneer Add , Mayer, 3500 FSK, , veneer joining Mayer type FSK Built in 1993 Dietz engine 380 V 7.7 / 9.1 A 1390 / 2850 rpm 3.4 / 4.2 Kw With Hobelkopfagregat 3500 cut length, special table, pneumatic LxHxT 5400 mm / 1500 mm / 950 mm NEW Top cared! AD-ID: A454281 More Infos click here
Throat depth 1200 mm
Feed speed infinitely variable approx. 10 - 50 m/min.
Veneer thickness approx. 0,4 - 2,0 mm
Veneer length from approx. 400 mm
Veneer strip width from approx. 50 mm
Drive 1,1 KW, 400 V, 50 Cy.,
Operating Voltage 400 V, 50 cyc.,3 Ph. + MP
Total connected load 6,5 kW
Air consumption approx. 600 NL/min.
Paint RAL 6011
Net weight approx. 1205 kg
For the longitudinal splicing of veneers with preglued edges from about 0,4 up to 2,0 mm thickness.
As joining medium a special PVAc glue is used which
has been applied to the veneer edges in a separate
gluing device before (KUPER KLM).
By means of a special heating system in the
FW/L 1200 V the glue is re-activated while the
sensitive feed discs are pulling the veneer edges
together. The PVAc glue is a rapid hardening,
joint filling white glue.
For the splicing of wavy veneers, the joint can be
reinforced by simultaneous application of a glue thread. Special features of the FW/L-1200 V are high throughfeed speed and easy operation.
, Josting, EFS 2300 L , Tl.-Id. 2067119 cutting length 2300 mm
inlay height 80 mm
motor parallel fence, three-phase current 0,12 kW
adjusting range of parallel fence 25 - 700 mm
positioning control
with individual measurement, chain measurement,
storage measurement and division measuerement
pressure beam operation by hydraulic 4,0 kW
knife drive by brake motor 3,5 kW
6-fold photo cell
guiding light
connection 380 V, 50 cyc.
length 3600 mm
width 1750 mm
height 1700 mm
weight 2900 kgs
, AD-ID: A412085 More Infos click here
Josting furnierschere EFS 2100 , Josting , EFS 2100, , work width 2100 mm electrical
parallel guide stop digital display deviating technical equipment
remains two-way light barrier secured reserving. Further information
give you gladly our coworkers in the selling. AD-ID: A432390 More Infos click here
Feed-through veneer press, BÜRKLE, ODW 2620/6, Platen length mm 3.000; Platen width mm 2.600; Press opening 150; Number of cylinders 13; Pressure kg/cm2 6; Total pressure t 468; Temperature up to °C 140; Total connection kW 25; Glue spreading Yes; Infeed belt conveyor Yes; Automatic unloading Yes; Heating platens Water; Material of the platen S, AD-ID: A366790 More Infos click here
jointing and gluing machine, KUPER, FW/J 920, KUPER jointing and gluing machine
type FW/J 920, used machine
• working (throat) depth 920 mm
• table size approx. 1100 x 350 mm
• motor size 180 W, 380 V, 3 Ph., 50 Hz
• heating head 200 W
• power consuption 450 W
• compressed air approx. 10 l/min.
• weight 185 kg
• complete size (LWH) 1350 x 580 x 1600 mm
• handbook + spare part document, AD-ID: A444959 More Infos click here
Veneer building up machine , Kuper, FW 1200 E, , Stalls Out cargo 1200mm, veneer thickness of about 0.3 - 3mm, high speed adjustable of about 35 - 60m/min, electronically controlled infinitely thread rash, Leimfadenkappvorrichtung, PLC control, dividing bridge with electrically gesteürtem Lower holder, polished stainless steel work table , Separate adjustable system of heating in stand-Drives, Including detailed manual. Dimensions approx 2120 x 730 x 1 [...Technical data truncated] AD-ID: A428972 More Infos click here
automatic veneer patcher, INTERHOLZ-RAIMANN, ASA I, Throat from center of tool to the column : 850mm
Thickness of veneer up to 6mm
Length of tool 50mm
Horsepower of motor 3PS-1500U/m.
Number of strokes -60/min
Space required -2200x1200mm
Nt weight - 2300 kg, AD-ID: A468477 More Infos click here
Kleistronik , Kleistronik Furniermess- und Gradingline , Kleistronik Furniermessanlage und Gradingline , , Generally: --------------- With the plant individual veneer packages are to be measured as a check of the suppliers and judged at the same time qualitatively. After measurement of the portion a listing is printed and compared by the individual veneer packages with the appropriate delivery note of the supplier. In addition and/or circumcised packages already sorted are to be measured and again labeled, in order to be able to sell these in the connection with the plant. An appropriate measurement and pallet would list on the cunning ruse on the job are then printed and to the supply attached. With an additional interface and software the portion data in the Meisterbuero are to be evaluated regarding price/achievement result, i.e. can before into single packages judged up to 40 quality classes with div. Calculation prices per quality class within a supplier portion to be evaluated. A pallet list with the appropriate single package evaluation like e.g. front, around commodity, cabinet sides etc. can be printed on the job. Individual suppliers and/or wood are evaluated separately and archived in the master office around a profit and a loss calculation portion way as Einkaufscontrolling to keep. Equipment components: --------------------------------- KT 960,000 veneer measuring and Gradingline: ------------------------------------------------------------- Max. transportation with a package distance of 10 cm 60 m/min. Dimensional accuracy plus/minus 1% control direction from left to right KT 105,000 label printer: ------------------------------------ Printer of fuer package labels KT 236,030 cunning printer: -------------------------------- Printer of fuer lists of the single packages of a portion. Software package Controlling/calculation master office consisting of: ---------------------------------------------------------------------------- Interface SAP over ASCI file without hardware networking with the plant necessarily. KT 016,000 module software WoodBusiness Life ----------------------------------------------------------------------- with data import inclusive, system data inclusive KT 016,502 portion calculation ----------------------------------------- Additional evaluation of purchase portions of profit and loss calculation regarding wood/single packages. System: ----------- Seizing and measuring veneer packages with electronic measurement unit. Precision of the measure (scanner) fuer all wood by input of the sheet number of the veneer packages. Surface determination of veneer packages and sorting on max. 40 pallets. Bar code label printings of fuer veneer packages and pallet labels, measure list printers and bar code scanners of fuer production collection. Input unit and control unit of fuer sheet number, quality, reduction of the veneer packages in Laenge and width, system attitudes we roundness factor and Laengen organization 1 cm or 5 cm. CONTROLLER unit of the technical function of the machine. Software: ------------- Input of the permanent number manually or with bar code scanner. Pallet number free input or ascending of the system assigning. Additional ones input tax quality, criterion 2, pallets and Stammkommtar of two Laengenbereichen. Indicate the presumptuous package data, sheet number, Laenge and width. Pressure of a Etikettes with bar code. Summation of master surface and pallet surface within the qualities with announcement in the screen. After a master conclusion pressure of a master total of etikettes per quality. With loose commodity after pallet conclusion a pallet label is printed. Listing jerk queries effected at the time of conclusion of a pallet. Here different expression variants are possible. After conclusion of the pallets this in a local or external data base and the following data are made available consist callable to edit the possibility: Sheet number, length and width of the veneer packages, tax, quality, Kiterium 2, minimum and maximum length capable for editing, new pressure from bar code labels and measure lists, overview according to qualities and criteria of the seized veneer surfaces, evaluation of work laminate, export of the veneer package data to other systems such as IBM (AS400), WAN, SAP. Veneer measuring table: ----------------------- 10.40 m x 1.05 m work height adjustable 85 - 95 cm to 50 m/min. Scanner in 5 mm of rasters, 960 mm wide synchronisation ral 9006 hardware network-able Windows 2000 or XP-Professional. Shuttle bar Ebone sound and diagram on board 1xAGP4X, 1xPCI,/4xUSB2,0 /3xIEEE1394 Firewire CCU P4 2.8 Ghz/533MHz FSB/512KB L2 cache 0.13, SIMM GDR 256MB/PC333/Infineon 40,8GB Seagate ST340014/7200 RPM floppy ones 1.44 mouse Logi Wheel keyboard mouse 17" LC display AD-ID: A380367 More Infos click here
Beleim and longitudinal building up machine , FISHER+RUECKLE, Omnimaster, , Furnierbeleimung and
longitudinal composition in a processing step. In the best way
suitably for the furniture industry, short parts, excess lengths and
special orders. for veneer lengths 300 - 3200 mm for veneer widths 45
- 1200 mm average production speed of 20 - 30 m/min (max. 50 m/min)
drive: The high-grade steel disk chains are propelled directly above
as well as down by two hydraulic motors. Introduction, feed motion:
The introduction roles take over the feed motion of the veneer,
geleiten it accurately at the order for glue past and lead the veneer
beleimte now to the heating zone. Filling: The optically steered
introduction guarantees a disalignment-free joint as well as simplest
filling of the machine. Order for glue: The finely adjustable glue
aggregate guarantees a perfect order for glue. The glue quantity can
be adapted to the wood sort or the speed.Console: The operating personnel has all machine-specific data in the
field of vision during production. Attitudes can be made without
production interruption. AD-ID: A380625 More Infos click here
Guillotine, CASELLAS, CC 250, Number of spare knifes 12; Strip width max mm 250; Cutting height mm 1; Strip width min mm 22; Weight kg 150; Through-feed technology Yes; Counter knife Yes; CE-mark Yes; Parallel fence Manually; Blade drive Electromotive; Availablity Warehouse D-01665 Klipphausen; In offer since 11-12-07; Conditio, AD-ID: A391743 More Infos click here
, Josting, EFS 2300 , Tl.-Id. 2062346
cutting length 2300 mm
inlay height 80 mm
motor parallel fence, three-phase current motor 0,12 kW
adjusting range of parallel fence 25 - 680 mm
with digital display, also for strips cutting
hydraulic pressure beam operation 3,0 kW
knife beam by brake motor 3,5 kW
industrial safety light curtain (2-fold at the moment)
alignment light
connection 380 V, 50 Hz
length 3400 mm
width 1650 mm
height 1600 mm
weight 2300 kgs
cutting length 3200 mm
cutting height 80 mm
with light barrier
hydraulic pressure beam
two-hand-operation
mechanic digital display for cutting of parallel width
and stripes
weight: 3500 kg
outside size: 4570 x 1550 mm
price on demand
****************
Pozycja Nr. 5433
Gilotyna do forniru Josting
typ EFS 3200
dlugosc ciecia 3200 mm
wysokosc wylozenia 80 mm
z zapora swietlna
belka dociskowa hydrauliczna
obsluga dwureczna
mechaniczny wskaznik ciecia
1 noz w maszynie
2 na zapasie
ciezar: 8500 kg, AD-ID: A469490 More Infos click here
, Josting, QFS 1300 , Tl.-Id. 2067118
pulling cut
cutting width 1300 mm
input height 40 mm
knife operation by brake motor
motor 380 Volt, 50 cyc 4,1 kW
two-hand safety control
pneum. pressure bar
big preparing table on the left-hand side
with stop rail 2400 mm
length 2400 mm
width 800 mm
height 1750 mm
weight 1450 kgs
, Josting, EFS 2600 , Tl.-Id. 2066580
cutting length 2600 mm
input height 80 mm
motor parallel stop, three-phase motor 0,12 kW
adjusting range of parallel stop 25 - 680 mm
with digital indicator, also for strip cutting
pressure-beam being operated manually 2,2 kW
knife beam by brake motor 3,5 kW
accident-protection light curtain(double at the moment)
directive light
electrical connected load 380 V, 50 Hz
length 3800 mm
width 1700 mm
height 1600 mm
weight
, Josting, PFS 2100 , Tl.-Id. 2061784
cutting length 2100 mm
inlay height 60 mm
motor parallel fence, three-phase current motor 0,12 kW
adjusting range of fence 25 - 680 mm
with digital display, also for stripes cutting
pneumatic pressure beam 8 bar
knife beam by brake motor 1,8 kW
industrial safety light curtain (2-fold at the moment)
alignment light
connection 380 V, 50 Hz
length 3100 mm
width 1650 mm
height 1450 mm
weight 2100 kgs
veneer splicing machine, Kuper, FW Junior 900 (19572), used
manufactured by Kuper
type FW Junior 900
range 900 mm
thread
electrical
required space ca. l x w x h mm
600 x 1,400 x 1,400
located in 97447 Gerolzhofen
No responsibility is taken for the correctness of this information!, AD-ID: A451256 More Infos click here
Funierzusammensetzmasch ne , Ott, OFM/S, , OTT Typ.OFM / S built 1971 Funierzusammensetzmaschine Masch.Nr.7683 stand execution, 2 throughput speeds, Mikroschaltersteürung, Polumschaltbarem three-phase 400V gearmotor 0.25 KW, driving facility. G & SONDEERPREIS OF NET 350th -- AD-ID: A455812 More Infos click here
Veneer sticking machine , Kuper, FWJ 900, , veneer sticking machine Kuper FWJ 900
stand discharge 900mm year of construction approx.. 1985 AD-ID: A415965 More Infos click here
Funiersäge , Scheer, FM 2-3000, , Scheer Funiersäge FS-2-3000 built 1984 400V average length of 3000mm Manülle clamping device with handwheel. G & SPECIAL please inquire! AD-ID: A454612 More Infos click here
throughfeed width 450 mm
finger joint cut
for the extension of veneer up to 3 mm thickness
weight: 50 kg
price on demand
****************
Pozycja nr 5312
Gilotyna do forniru Schanbacher Typ hydropneumatische Furnierstanze
Rok 09/95
Szerokosc przeswitu / obrobki 450 mm
Wytlacza /wycina/na wczepy
Przedluzanie forniru o max grubosci do 3 mm
, AD-ID: A442385 More Infos click here
for the joining of veneer thickness 0,4 – 3 mm
throat depth 1700 mm
variable infeed speed 10 - 30 m/min.
drive brake motor 0,55 kW
input power 1,5 kW
air consumption 2 NL/min.
weight: 730 kg
price on demand
****************
pozycja nr 4764
Zszywarka do furniru Kuper
typ FW 1700
wysieg – dlugosc zszywania 1700 mm
posuw bezstopniowo regulowany 10-30 m/min
do laczenia furniru o grubosci 0,4 – 3 mm
laczna moc przylyczeniowa 1,5 kW, AD-ID: A442743 More Infos click here
Complete peeling line + dryers and tie-clip by , Keller, BSH, , , Centring company cellar type GZB 4-10/26 Bj. 1981 points of centring 3 log max. length 2,600 mm log max. dia. meter 800 mm log min. dia. meter 200 mm change time 8-10 sec. log Peeling machine Fabr. Cellar type 10K 26T log max. length 2,600 mm log max. dia. meter 1000 mm log min dia. meter 200 mm log min. length 1,800 mm without support measurer length 2,700 mm of measurer angles 69 Measurer strength 16 mm max. veneer strength 7 mm of Restzilinder/log 110 mm of spindle number of revolutions 350 per minute Retractor plant type AVUA section 2 max. retractor material 2,800 mm dia. meters of roles of 197 mm of number of revolutions of 30 384 per minute Tray system Singular of section 2 singular of floors 5 length 12,675 mm broad 2,600 mm Phneumatikschere type CXA 27 measurer length 2,760 mm of measurer angles 20 Veneer strength max. 5 mm of Gegenmesser 1 Stk. Net volume dryer Fabr. Babcock BSH, type EBDU III 304/26 m.k. 3 floors length 40,363 m broad 5 m height 3.42 m work length 26 m work width 3 m veneer strength 0.8 -6 mm Phneumatikschere type STCZ 28 double width 2 x 1,400 mm 2,800 mm of volume 30000 40000 Schnitt/8 hr. inclusive with conveyor plants Price on request AD-ID: A443070 More Infos click here
Complete peeling line + dryers and tie-clip by , Keller, BSH, , , Centring company cellar type GZB 3-10/14 Bj. 1981 points of centring 3 log max. Laenge 1,400 mm log max. dia. meter 800 mm log min. dia. meter 200 mm change time 8-10 sec. log Peeling machine Fabr. Cellar type 10K 14T log max. Laenge 1,400 mm log max. dia. meter 1000 mm log min dia. meter 200 mm log min. Laenge 650 mm Messerlaenge 1,500 mm of measurer angles 20 Printing bar angle 69 Measurer strength 16 mm max. veneer strength 7 mm of Restzilinder log 110 mm of spindle number of revolutions 350 per minute Retractor plant type AVUA section 2 max. retractor material 2,800 mm dia. meters of roles of 197 mm of number of revolutions of 30 384 per minute Tray system singular of section 2 singular of floors 5 Laenge 12,675 mm broad 1,400 mm Phneumatikschere type CXA 17 Messerlaenge 1,760 mm of measurer angles 20 Veneer strength max. 5 mm of Gegenmesser 1 Stk. Net volume dryer Fabr. Babcock BSH, type EBDU II 304/36/38/3 S m.k. Floors 2 length 49,013 m broad 4.54 m height 2.955 m work length 38 m work width 3 m veneer strength 0.8 to 6 mm Phneumatikschere lower part type STCZ 31 double width 2 x 1,550 mm 3,100 mm of volume 30000 40000 Schnitt/8 hr. inclusive with conveyor plants Phneumatikschere upper section type STCZ 31 double width 2 x 1,550 mm 3,100 mm of volume 30000 40000 Schnitt/8 hr. inclusive with conveyor plants Price on request AD-ID: A443072 More Infos click here
, Josting, PFS 2100 , Tl.-Id. 2069532
cutting length 2100 mm
input height 60 mm
motor parallel stop, three-phase motor 0,12 kW
adjusting range of stop 25 - 680 mm
with digital indication, also for strip cutting
pneumatic pressure beam 8 bar
knife beam by brake motor 2,8 kW
noise-protection light curtain (none at the moment)
directive light
electrical connected load 380 V, 50 Hz
length 3150 mm
width 1450 mm
height 1650 mm
weight 2100 kg
, Josting, EFS 2600 , Tl.-Id. 2069405
cutting length 2600 mm
input height 80 mm
parallel stop with hand wheel
adjusting range of parallel stop 25 - 680 mm
with digital indicator, also for strip cutting
pressure beam being operated hydraulically 2,2 kW
knife beam by brake motor 3,5 kW
noise-protection light curtain (not existing at the moment)
post-cut device
directive light
electrical connected load 380 V, 50 Hz
length 3800 mm
width 1600 mm
height 1800 mm
weight 2600 kg
Veneer scissors , Josting, PFS 2100 , , Tl.-Id. 2069216 average length 2100 mm Einlegehöhe 60 mm motor parallel stop, AC motor 0.12 kW setting range attack 25 - 680 mm with digital display, including strip bars pneumatic pressure cutting 8 bar cutter bar using Brake Motor 2.8 kW safety light curtain (currently no) After cutting teaching institution light Following 380 V, 50 Hz length 3150 mm width 1450 mm height 1650 mm weight of 2100 kg AD-ID: A448729 More Infos click here
, Josting, EFS 2300 , Tl.-Id. 2069066
cutting length 2300 mm
input height 80 mm
parallel stop with hand wheel
adjusting range of parallel stop 25 - 680 mm
with digital indicator, also for strip cutting
pressure beam being operated hydraulically 2,2 kW
knife beam by brake motor 3,5 kW
accident-protection light curtain (none at the moment)
directive light
electrical connected load 380 V, 50 Hz
length 3500 mm
width 1600 mm
height 1900 mm
weight 2300 kg
Veneer punch zig-zag Schanbacher , Schanbacher, , , pneumatic cutting width about 37cm built on mobile 1m per table left and right as new state AD-ID: A448851 More Infos click here
Endverklebemaschine , Kuper, EMZ/2 - M, , working width 400-2800 mm thick veneer 0.3 - 1 mm feed infinitely 15-30 m / min more information by phone or e-mail AD-ID: A453277 More Infos click here
furnier-zusammensetzmaschine , KUPER, FL/INNOVATION, , veneer thicknesses of ca.0, 3 to 2.5 mm min.streifenlänge ca.500mm veneer strip width from 45mm feed from 20 to 50m/min Heiztemperatur to ca.220 C Total connection ca.9, 3kW space: 2370x1960x1470mm For Harnstoffleime suitable AD-ID: A462007 More Infos click here
veneer splicing machine, Kuper, 900 (19828), used
manufactured by Kuper
type 900
mach. No. 1705 3214
range 900 mm
thread
heating system electrical
required space ca. l x w x h mm
1,300 x 700 x 1,500
located in 97447 Gerolzhofen
No responsibility is taken for the correctness of this information!
veneer splicing machine, Kuper, FWJ 900 (19855), used
manufactured by Kuper
type FW J 900
mach. No. 19034551
range 900 mm
thread
heating system electrical
moveable
required space ca. l x w x h mm
700 x 1,400 x 1,600
weight ca. 250 kg
located in 97447 Gerolzhofen
No responsibility is taken for the correctness of this information!, AD-ID: A463924 More Infos click here
