pulverizer, HERBOLD, PU 1250, pulverizer
avaiable with exchangeable rotor/stator configuration drive max.200 kw
machines can be shown in operation, AD-ID: A52173 More Infos click here
chopper, Nestro, Typ EZ 6/1 S, built in 2008, engine performance 18.5 KW, exhaust air port Ø = 160 mm, hydraulic slidegate, rotor width 600 mm, rotor Ø = 348 mm, control desk, new using machine, overhaul, ex-factory price over euro 19,100, , AD-ID: A138058 More Infos click here
Shredder, Rudnick Enners, RE-TH 300-450/800/7, Shredder for fabrication of wood-chips Fuel/electro-motor, vibration-screen and transport equipments, AD-ID: A457992 More Infos click here
Waste chipper / hogger, JENZ, HE 220 280 TK, Vertical hogger with cutterblock
Infeed: 40 x 30 cm
Motor 22 kW
Dust extraction outlet: 200 mm., AD-ID: A452330 More Infos click here
chipper, Gross, GAZ 62 (18191), used, revised,
compl. guidings-sliding rails renewed,
all cutter screws and partly cutters
renewed, perforated strainer revised
manufactured by Gross
type GAZ 62
built in 11/2002
mach. No. H-2244/62
CE tested for type examination
GS-wood dust approved
motor 18.5 kW
low speed
hood opening l x w mm
600 x 800
cutting unit width 620 mm
autom. switch-off
vibration damper
cutter system Karo-cutter plates
original price ca. 17,000.00 €
exhaust connection 160 mm
required space ca. 2,200 x 1,300 mm
weight ca. 1,400 kg
Gesamtanschlußwert ca 19.2 kW
located in 97447 Gerolzhofen
No responsibility is taken for the correctness of this information!
Residual wood Hacker , Rudnik& Enners, 140 X 500, , The hackers comes from a small sawmill has only about 10 years gone. 30 kw engine, but can be increased. Images can be sent by e-mail Hacker is dismantled AD-ID: A468068 More Infos click here
waste wood chipper, Gross, GAZ 62 E (19333), manufactured by Gross
type GAZ 62 E
exhibition machine - NEW
clamping: 400 V/50 Hz
opening: 600 x 800 mm
hood volume: 0,6 m³
performance depends on material and strainer
rotor diameter: 252 mm
rotor length: 600 mm
rotor rpm: 60- 100 UpM
motor performance: 18.5 kW
cutting system: 14 cutters
dust extraction hood: 160 mm
dimensions: l = 1,800 mm
w = 1,230 mm
h = 1,640 mm
weight: ca. 1,300 kg
No responsibility is taken for the correctness of this information!
briquette press, VOTECS, Typ AP 675s, Neumaschine, built in 2008, 7,5 KW hydraulic system, briquette Ø=60 mm, control desk, new-condition, ex-factory price euro 17.500, -…, AD-ID: A232380 More Infos click here
hogger - waste chipper, MARIO FERRARI, F3 T2, horizontal waste chipper
Feeding by a viborinne: 32 cm width, 170 cm length
Input: 32 x 12 cm Motor: 30 kW
Outlet for dust extraction with diameter 270 mm
Capacity 1 to 2 m3/hour
Nip rollers at the infeed
Diameter of cutterblock: 330mm
Speed of cutterblock: 850 tr/min
Number of knives: 2
Partical length ca.: 10-15mm, AD-ID: A452336 More Infos click here
Hacker , Weibert, GO GAZ 62 E, , Exhibition! WEIBERT WE built 2008 400V 18.5 kW Zuführöffnung 600 x 800mm funnel content 0.6 m throughput performance materials and Siebabhängig, rotor diameter of 252mm, length 600mm rotor, rotor speed 60-100 rpm., Tools, 14 knives, Sieblochung 10-40mm, from Absazgstutzen 160mm, Luftgeschw. 28 m / sec. Weight of 1300kg. L = 1800mm B = 1200mm H = 1640mm The material supply is through the filling containers (funnel). A hydraulically controlled forced feeding drüc [...Technical data truncated] AD-ID: A452311 More Infos click here
Hackers plant , Fabr. Jenz, Typ 1000/300 WE, , intake inlet height 300 mm width 994 mm Engine 110 kW task performance about 25 to 30 rm / h rotor diameter of 620 mm knife Number 20 pcs weight about 6.2 tonnes of steel chains including length 2,500 mm AD-ID: A468066 More Infos click here
Hacker , SCHUKO, ZM 600-SPS, , width 600 mm diameter rotor. 220 mm rotor speed has reached 110 rpm amperage 22 A / 11 kW / 50 Hz capacity of 180 kg / h operating hours deducting 160 hours turning tool knife 6-cutting extraction 160 mm in diameter weighing 900 kg Dimensions 1300 x 1000 x 1640 mm Hacker is visually and technically 100% faultless and was also reviewed! AD-ID: A447677 More Infos click here
CHIPPER / CHUNKER 60m³ / h, LAIMET - LAIMET- LAIMET, HP 50, Laimet HP-50 Chipper/Chunker
The feeder chute can easily be rotated trough 90O for ease of feeding and positioning of the machine. The outlet chute for the chippings can thus be pointed in the desired direction.
The HP-50 is powered by a diesel engine type: Scania D 14 approx. 450 HP the transmission is 5 speed hydraulic and the machine is very easy to operate, service friendly and simple to maintain. All hydraulic pressure hoses will be renewed when you by the machine.
Length: 12.5 meter (41 feet) incl, feeder chute Chipper: Laimet HP-50
Width: 2.5 meter (8,2 feet) Engine: Scania D14
Height: 3.45 meter (11,3 feet) Undercarriage: 3-axel trailer
Weight: Ca. 16 tons Transmission: Hydr. Danfoss/Voac Capacity: 30-60 m3/ht solidmatter Power train: Clutch: Tecnodrive BD 300
Gear: Tecnodrive AM 450 1:1.29
Big hydraulic Gear: 1:8.56
Feed chute 600X700 mm
Rotationspeed 100-300 rpm
Power input 300-400 kW (410-550 hp)
Feed speed 0,2-0,5m/s
Weight of the chipper only 6500 KG
Rotating mass 2100 KG
Mounted chipping blade 1/220 100..150 mm chunks
Hour’s the machine was running About 250 hour’s
Price of a new extra spare conical screw blade is: 1/220 Chunk size: 100…150 mm € 16.500 Excl. TAX
2/220 Chunk size: 50…75 mm € 23.500 Excl. TAX
Our price for this Laimet HP-50 is
€ 238.000,- Exclusive TAX and Export cost.
It is possible to run the machine and make a appointment for this. Kind regards, Thomas Brouwers
BROUWERS HBM
HUNDEGGER Gebrauchtabbundanlagenvertrieb
Industrieanlagen für HOLZ
Ammerseestraße 45
D - 82396 Pähl, AD-ID: A472329 More Infos click here
HOLZZERKLEINERER , GROSS, GAZ 62 E, , LG 01802, 01803 Neumaschine! Built in 2008 Motor power: 18.5 kW Zuführöffnung: 600 x 800 mm funnel content: 0.6 m rotor diameter: 252 mm rotor Length: 600 mm rotor speed: 60 - 100 rpm. Cutting: 14 knives mesh sieve: 15 / 20 mm automatic. Stern triangle start, automatic-off at idle electronic Steürschrank with 5 m harness CE-compliant, GS-character "staubgeprüft" Instructions AD-ID: A393142 More Infos click here
chipper, Weima, WL 4 (19858), used, cleaned, function checked,
partly revised, test run,
hydraulic cylinder for push floor
revised, new sealings, cutter screws partly new,
preforated strainer reconditioned
manufactured by Weima
type WL 4
built in 1992
mach. No. 252
GS-wood dust approved
motor 18.5 kW
low speed
with hydraulic push floor
hood opening l x w mm
800 x 600
cutting unit width 600
vibration damper
number of cutters 14
cutter system turncutter
exhaust connection 160 mm
weight ca. 1,600 kg
located in 97447 Gerolzhofen
No responsibility is taken for the correctness of this information!, AD-ID: A478385 More Infos click here
chopper, VOTECS , EZ 6/2 S, built in 2008, engine performance 18.5 KW, exhaust air port Ø = 160 mm, hydraulic slidegate, rotor width 620 mm, rotor Ø = 348 mm, control desk, new machine, ex-factory price over euro 19.500, -…, AD-ID: A384826 More Infos click here
chopper, WEIMA , Typ WL 3 e, built in 1998, hydraulic slidegate, engine performance 15 KW, rotor 600 mm, control desk, good condition , AD-ID: A478523 More Infos click here
Low-speed engine STARTING FROM 1000 with lying introduction , Reinbold, , ,
low-speed engines with 37 KW of achievement with lying introduction
over Vibrorinne work width 1000 mm work height 200 mm AD-ID: A421373 More Infos click here
, Gross, GL 6, Tl.-Id. 2060447
with profile rotor and hydraulic feeding
With this hogging machine, all kinds of
wood waste, thin strips, pallets, coated
chipboard etc. can be processed to hog fuels.
Wood pieces or diagonal sizes of bulky material
should not be wider than machine width in order
to ensure an absolutely smooth operation.
Technical data:
feed opening 800 x 1000 mm
height of funnel 1100 mm
funnel capacity approx. 0,8 cbm
rotor diameter 248 mm
power requirement 18,5 kW
rotor speed approx. 90 t/min.
tools Delta Smal
screen perforation 15/20
suction nozzle 200 mm
length 2150 mm
width 1350 mm
height 1630 mm
weight 1300 kgs
, AD-ID: A402219 More Infos click here
Osmeka Holzzerkleinerer type 100 , Osmeka , Typ 100, , Osmeka Holzzerkleinerer Year Built Typ 100 kW 1987 22 Speed 64 u / min. Funnel 2 x 2 meters AD-ID: A427684 More Infos click here
Hacker , REINBOLD Horizontal-Einzug, Langsamlaeufer, RHZ 1000, , Ideal for pallets and long piece of wood. No short cut. Indentation width / patches as well as rotor length 1000 mm, 200 mm height withdrawal, rotor diameter of 370 mm with 100 tools / turning knife. Speed 104 rpm, 37 kW main engine, feed rollers below 2 pieces, diameter of 300 mm. Top with 1 piece roll diameter 500 mm. Host with Förderschnecke, 300 mm in diameter. Vibro-loading conveyors with 1000 mm x 4000 mm long AD-ID: A431898 More Infos click here
shredder, SCHUKO, ZM 900 SL, SCHUKO shredder
type ZM 900 L, year 1996
• with push slider
• hydraulic aggregate
• switch board with SPS-control
with operating hours meter
(meter reading: 3276 h.)
• slow rotor with
starlike, changeable knifes
• funnel opening (LW) 1400 x 700 mm
• funnel height 1000 mm
• funnel opening down (LW) 950 x 700 mm
• motor size 18,5 kW
• rpm 110 U/min.
• power 260-300 kg/h conditional
of the material
• rotor-Ø 220 mm, 25 knifes
• riddle-Ø 20 mm
• suction speed 28 m/sec necessary
• suction socket-Ø 2x 160 mm
• weight 1800 kg
• machine size (LWH) 2650 x 1250 x 1650 mm
Funnel Hacker , Moeller, unbekannt, , hackers Moeller gebr. Funnel Width: 850 mm Length: 400 mm Engine: 15 KW Technically and visually in order AD-ID: A460045 More Infos click here
Hacker , ZENO, ZTLL 600 x 1000, , chopping achievement 2 - 2.5 rm/h funnel volumes 0.5 m
chopping length 0 20 mm of engine performance main drive 18 KW of
engine performance hydraulics 0.75 KW weight 1750 kg of number of
tools 20 St. Single taps rotor speed of 110 upm rotor diameters 300 mm
intake cross section length 1000 mm broad 600 mm of suction nozzle
diameters 250 mm AD-ID: A407794 More Infos click here
Hacker , LINDNER, T 300 / 100-2, , length: 170 cm broad: 90 cm height: 98 cm 380 V 50 cycles
per second of 30 KW of Bj: 1978 rotor speed: 2000 U/min. Number of
measurers: 2 scope of supply: Hacker, manual, electrical mechanism,
meat cleaver, div. Tool AD-ID: A421411 More Infos click here
, Gross, GAZ 62, Tl.-Id. 2069072
year of construction: 2008
*** SHOW ROOM MACHINE ***
With this hogging machine, all kinds of
wood waste, thin strips, coated
chipboard etc. can be processed to hog fuels.
Wood pieces or diagonal sizes of bulky material
should not be wider than machine width in order
to ensure an absolutely smooth operation.
technical data:
feed opening 600 x 800 mm
height of funnel 1100 mm
funnel capacity approx. 0,6 cbm.
rotor diameter 252 mm
rotor length 600 mm
rotor rotation approx. 90 rpm.
powr requirement 18,5 kW
tools 21
screen perforation 15/20 mm
suction nozzle 160 mm
switch cabinet with approx. 5 m cablefrom
automatic delta-star start-up
automatic stop in case of idle run
vibration-reducing machinery feet
legnth 1850 mm
width 1250 mm
height 1650 mm
weight 1300 kgs
shredder, ZENO, ZMTH 300/250 E 85, , Hack 6-8 mm in length performance minced 1-2 m / h main engine 15 kW with Zuführschacht Vibro-2.20 m long gutter only 368 hours of operation (the display) weighing about 800 kg AD-ID: A472701 More Infos click here
Hammer mill , , , , small Haecksler chopper for wood OAU with connection
to an exhaust, charging hole 20*25cm, engine 5,5KW AD-ID: A389347 More Infos click here
HOLZZERKLEINERER , GROSS, GAZ Öko, , Neumaschine! "Gross" wood chippers type GAZ ECO Built in 2008 Motor power: 15 kW Zuführöffnung: 600 x 800 mm funnel content: 0.6 m rotor diameter: 252 mm rotor Length: 600 mm rotor speed: 60 - 100 rpm. Cutting: 14 knives mesh sieve: 15 / 20 mm automatic. Stern triangle start, automatic-off at idle electronic Steürschrank with 5 m harness CE-compliant, GS-character "staubgeprüft" Instructions AD-ID: A458318 More Infos click here
shredder, GROSS, GAZ 62, , with hydraulic slider with rotor 60 Schneidkronen (Delta-meter) supply opening 620 x 800 mm screen size 15/20 mm hole total value of 19.5 kW port main engine 15 kW Vacuum D 160 mm knife, knife and counter-perforated screen are new AD-ID: A468042 More Infos click here
Screening equipment , , , , Screening equipment to the separation Saegemehl and hogged wood 3.30 x 2.70 m, with Ruettelmotor, good condition AD-ID: A432660 More Infos click here
Hackers , Vecoplan, VAZ 120/105, , Langsamläufer.Mit big boost shear block ground ca.1050mm x 250mm x 1000mm. Knives wave ca.D 250mm x 1050mm. Performance: 18.5 KW plus hydraulic engine thrust for the ground. estimated 3-4 KW. Inside the hopper: 1070mm.Trichterhöhe 1500mm x 1230mm. ca.Masse pan: L 3000mm x 2100mm x 2900mm H (1400mm Weight Without funnel ca.3 to. Wasserschaden.Nach statement by the janitor and electrician, he is ready, I doubt dass.Stapler Voror [...Technical data truncated] AD-ID: A482070 More Infos click here
GROSS type GAZ 62 , , , , System Slow-runner. Rotor length of 620 mm, rotor diameter of 248 mm, 30-turn diamond knife, 18.5 kW drive motor, PLC control HITACHI brand. Machine with a few operating hours. AD-ID: A462543 More Infos click here
Shredder / Hackers , WEIBERT, WE, , WEIBERT shredder / hacker WE The new power package with the super power, the robust recycling-shredder of the series WE economically and effectively crush materials such as wood, cardboard, plastic etc. Depending on the customer-specific task, the chopper to the throughput volume, task material etc. adjusted accordingly. The chopper Series WE are compact built and designed for high performance. Zuführöffnung (mm): 600 x 800 T [...Technical data truncated] AD-ID: A459749 More Infos click here
Wood chippers (hackers) , WEIMA, WL 4, , 18.5 kW engine power hydraulic vane rotor 14 Schneidkronen intake opening 600 x 800 mm sieve hole size 12/15 mm 160 mm Vacuum D L / B / H 180/115/165 cm Weight about 1300 kg AD-ID: A460080 More Infos click here
chipper, Holzma, Z (18095), with compl. sound protection booth and vibro groove
used, revised, incl. test run,
feed roll new ball bearing,
cutter and clamp screws partly new,
manufactured by Holzma
type Z
mach. No. Z 701
motor 30 kW
high speed
hood opening B x H mm
110 x 200
cutting unit width 110 mm
cutter system turncutter 50 mm
exhaust connection 200 x 130 mm
incl. vibro groove
3,800 x 200 x 180 mm
located in 97447 Gerolzhofen
No responsibility is taken for the correctness of this information!, AD-ID: A478524 More Infos click here
Doppstadt Grizzly with Erjo Chipper, Doppstadt, Grizzly, Doppstadt Grizzly with Erjo Chipper
· Completely renovated · Ca. 4580 hours · Year of construction: 2000
· Click on the picture to see more.
, AD-ID: A472690 More Infos click here
