Buffing machine for flat surfaces, AGLA, , Buffing machine with oscillating buffing wheel, 700 mm capacity
Table size 2400 x 700 mm. Table moving automatically left right underneath the buffing wheels
Max. workpiece height approx. 700 mm.
Diameter buffing wheels: 310 mm. Arbor: 38mm, AD-ID: A433304 More Infos click here
Venjakob distributors brushes Machine , Venjakob , , , Venjakob distributors suction machine with brushes and brushes without belt AD-ID: A468805 More Infos click here
, KED-Ehemann, P10/5.8 doppelseitig (18630), , make KED uses polishing and brushing machine - married man
type P 10/5,8 year of construction 1978 machine NR. 734573 work width
200 mm of inclusive. 1 air sharpening drum and 1 brush sanding roll
engine 1.5/2.4 KW of 2 numbers of revolutions: 980/1450 U/min.
Ex-factory price kompl approx.. 4.500, - suction connection 2
adjustable exhaust hoods D. 120 mm stock location 97447 Gerolzhofen
all data without guarantee! AD-ID: A352391 More Infos click here
Kahrmann brushing machine , Kahrmann , , , work width: max. 1300 mm of
durchlasshoehe: max. 80mm brushes from above, Durchm. 175 mm of
brushes from down, Durchm.175 mm drive workpiece length is made by
flat straps: min. 400 mm discharge-laterally a 600 mm broad, hinged
roller race with 4 roles total connected load: 3 KW of operating
voltage: 380 V, 50 Hz/3 exhaust: Number of connecting pieces: 2 ea..
Diameter: 160 mm of dimensions: LXBXH: 2100 x 1300 x 1600 mm AD-ID: A436805 More Infos click here
Between lacquer finish Machine , DMC , Rotosand 130, , Lack Between DMC Suitable grinding machine for grinding the paint for smooth intermediate parts and components with contours Specifications: - Manufacturer: DMC - Tpye.: Roto sand 130 - working width: 1300 mm - outdoor mass: approx 1942 x 3538 mm - performance about 22, 00 Kw - 4 each piece Schleifköpfe turning, 2 row, or 8 Schleifwalzen - Built in 1993 AD-ID: A455912 More Infos click here
Buerkle transverse brushing machine DBM of 800 , Buerkle , DBM 800, , to the bilateral Entstauben of flat workpiece surfaces Brushing aggregates: ----------------------- - Transverse segment brushes (chaining system) with own drive. - Even brush wear extends the service life. - Easy changeable brushing segments - adjustable brushing jerk - efficient exhaust with only 1 pipe union. Hoeheneinstellung: -------------------------- - Spindle with handwheel and mechanical digital display Workpiece transport: ----------------------------- - Rubberized in and pairs of excerpt rollers - separate feed drive Technical data: --------------------------- Brush trimming: Mexico Fibre Maeschinenlaenge: 425 mm The safety and health requirements correspond to the EEC machine guideline. Electrical control and controls in a switchgear cabinet at the machine. Minimum exhaust mixes: m /h with 28 m/s: 3500 Drive power: KW: 2,1 Weight: kg: 700 Additional devices: ----------------------------- 2,1 Frquenzregelbarer drive 6.0 motor removal with transportation stop, when restarting automatic attitude of the target thickness value. 7,0 electrical control of the machine with DP-Profibus connection for enterprise in centralsteered Lackieranlagen. AD-ID: A376438 More Infos click here
Brushing machine/grinding machine , Bauerrichter, 800, , machine with 2 brushing
aggregates to the application in of oil or wax or for subsequent
treatment of foil-encased fronts. Also umuestbar to structuring or
other one. Sanding rolls and feed motion speed adjusted with
Osszilation work width 800 mm AD-ID: A403289 More Infos click here
Transverse brush , Eigenbau Mink System, , , transverse brush pass band 800 mm of
Durhlasshoehe adjustable brush width approx. 60 mm motor feed motion
roll bar Minkinbuerstensytem AD-ID: A428630 More Infos click here
technische Daten:
- producer: Fladder
- Type: GYRO 300
- year of construction: 1994
- working width : 1300 mm
- working height: approx 850 mm
- 4 grinding heads
- feed speed: 0,3-10 m/min.
- overall width: approx: 2300 mm
- overall length approx: 2100 mm
- overall height approx: 2220 mm
- machine weight: 2300 kg
- connected load ca. 25 kW
- in good condition
- lacation: Stock in Blomberg, AD-ID: A440711 More Infos click here
Distributor brush , VENJAKOB, VBV, , Distributor brush manufacturer Venjakob Upper section of this machine is displaceable, on the different Times after the order for pickling thus adjustable. The machine consists of: - 1 Stk. PVC conveyor: Length 5000 mm - belt width 1300 mm - external width 1511 mm - work-hear 860 50 mm - flow velocity adjustably of m/min 1.5 - 7,5. Belt has one very much detention-joyful special surface. Two diagonally for direction of travel developed Pickling distributor brushes for formed parts. These are together in hear up Workpiece strength adjustable. Each brush is separately stepless adjustably angetrieben.n = 200-900 Rpm. To the exchange and Clean are the brushes also a quick change mechanism equipped, the one easy Replacement of the brushes through an operator of that Operating side out makes possible. To the removal of Solvent steams and possibly. resulting Staubkoernern is between the brushes one Exhaust intended. Necessary suction power 4300 qm/h. The brushes and those Exhaust are in one closed sectional steel housings accommodated. AD-ID: A442683 More Infos click here
Cleaning Plant , Wandres, Cleaner CH 52, , working width: 1,500 mm height: 950 mm Forward Height: max. 50 mm machine equipped with: - through brush up / down - cleaning brushes - transport speed about 90 m / min. -- Cleaning fluid - additional Abblaseinrichtung for the cleaning products AD-ID: A460930 More Infos click here
Brushing machine/grinding machine , Tilleke, LSM 700, , This concerns a aeltere used full-functional grinding machine of the company Walter TILLEKE. Further information and pictures roughen to be requested. An inspection is at any time moeglich. The machine can become upstream the HYMMEN Lackieranlage, casting machine (other offer). AD-ID: A383728 More Infos click here
Brush machine , Fabr.: Venjakob, , , Width/conveyor: 1200 mm of length/conveyor: 4000 mm broad/brush: 1300 mm with 2 brush units (Staubbuersten) AD-ID: A356634 More Infos click here
technische Daten:
- producer: Fladder
- Type: GYRO 300
- year of construction: 1994
- working width : 1300 mm
- working height: approx 850 mm
- 4 grinding heads
- feed speed: 0,3-10 m/min.
- overall width: approx: 2300 mm
- overall length approx: 2100 mm
- overall height approx: 2220 mm
- machine weight: 2300 kg
- connected load ca. 25 kW
- in good condition
- lacation: Stock in Blomberg, AD-ID: A409051 More Infos click here
Cleaning Plant , Wandres, Cleaner CH 52, , working width: 1,500 mm height: 950 mm Forward Height: max. 50 mm machine equipped with: right / left brush from the top right / left brush from the bottom cleaning brushes transport speed: about 90 m / min additional Abblaseinrichtung for the cleaning products. AD-ID: A460929 More Infos click here
Venjakob pickling driver machine VBV 1300 , Venjakob , VBV 1300, , 2 pieces - to deliver separately For even driving out pickle after the spraying procedure. equipped with: 2 straight, diagonally brush aggregates, hoehenverstellbar by means of spindle, placed to the direction of travel, motor propelled Work width max. 1300 mm The drive is infinitely variable by 200-900 UpM engine: ever 220/380 V, ex EEC 3, 0.75 KW 1 brush quick change mechanism with clamping cylinder and all pneumatic accessories 1 group of ex tracers for switching the drive engines on and off AD-ID: A382210 More Infos click here
polishing and intermediate sanding machine, Quickwood, M3 (19406), used
top condition
manufactured by Quickwood
type M3
for sashs with
6 aggregates
built in 1991
mach. No. 007
6 aggregates:
2 from the bottom equipped with wobble disc
2 from top equipped with wobble disc
+ 2 tiltable aggregates
motor 6 x 0.3 kW
height adjustment manual
feed speed infinitely variable, hand wheel
rpm infinitely variable frequency controlled
exhaust connection 3 x 120 mm d.
required space ca. l x w x h mm
2,500 x 1,200 x 1,600
located in 97447 Gerolzhofen
No responsibility is taken for the correctness of this information!
double-sided polishing and brushing machine, Ehemann, (19360), used
cleaned, test run,
manufactured by Ehemann
equipped with brush roll
1 x 200 mm width, d. 280
with air sanding drum
1 x 200 mm width, d. 200
rpm infinitely variable, frequency controlled
exhaust connection 2x120 mm
located in 97447 Gerolzhofen
No responsibility is taken for the correctness of this information!, AD-ID: A414454 More Infos click here
