CNC milling machine Chiron Mill 2000

Year of manufacture
Type of offer


Machine type
CNC milling machine
Mill 2000
Year of manufacture
good (used)
ready for operation


Call Request price


Listing ID
Last updated
Times Seen
204521 Impressions
Sales Inquiries


Vertical CNC production center MILL 2000
Partially Refurbished Used Machine - Year 2002/2
2016 Spindle renewed, X axis renewed

Weight 9.500 kg
Machine no. 220-05

Driving machine with rigid table
Machine substructure with integrated chip delivery,
Ejection to the left

Equipment package NC swivel head
Motor spindle for swivel head, grease lubrication
N max = 12000 min
N = 21 kW at 2500 min
Md = 80 Nm at S6 40% ED
Tool clamping via disc springs, release hydraulically
Tool holder for HSK-A 63 DIN 69063

NC swivel axis ± 100
- 30 rpm, resolution 0.001 °
- Partial accuracy ± 10 "with direct measuring system
- Drive torque 280 Nm
- with hydraulic clamping, holding torque d. Clamping 1400 Nm

Hydraulic unit for swivel head clamp and release unit for
tool clamping

Tool magazine designed for 40 toolholders HSK-A 63 DIN 69063

Drilling capacity in St 60 ø 36 mm
Thread cutting M24
Milling capacity St 60 350 cm³ / min

X axis
2000 mm
Y-axis 480 mm

Z-axis horizontal spindle 715 mm / vertical spindle 630 mm

Automatic tool changer
Tooling 40
Tool shank HSK-A 63 DIN 69893
Tool-∅ max. 75 mm
Tool-∅ for free
Neighboring places max. 125 mm
Tool length max. 280 mm
Tool weight 3 kg (max. 8 kg)
Tool change time approx. 1.5 s (control-dependent)
Chip-to-chip time approx. 5.0 s (control-dependent)

Starteisch with chip tray
Clamping surface 2600 x 550 mm²
With 2 T-slots
2 x 18 H12, 1 x 18 H8
Feed drive for X, Y and Z axes

Digital direct drives with indirect absolute distance measuring system

(No reference point approach)

Rapid traverse speed 40 m / min in all axes

Siemens CNC control unit 840D

(PCU 50 / NCU 572.3, 6 measuring circuits, 1 channel)

Including 10.4 "TFT color display / full keyboard OP032S

NC memory 256 KB

(Freely available up to 200 programs)

For the processing of part programs according to DIN 66025

Drilling cycles G81-G89

Drilling and milling pictures

M and T functions

Circular interpolation (full-circuit programming)

Restart in the program

Subroutine technology in language and parameters

simultaneous programming


Cycle support

Polar coordination

Tool compensation for geometry, wear

Tool radius compensation with intersection calculation

Transition radii

4 storable zero-point shifts G54-G57

30 Zero offset via G functions programmable

3D interpolation / helix interpolation

Screen switch off


scaling factor

Inserting chamfers and radii
Universal interface RS 232C (2x V24)
Oriented spindle support
Processing of large CNC programs via V24 interface
Metric or inch dimensions
Software limit switch
NC diagnosis
machine diagnosis
Absolute, indirect measuring system
Power indicator on the screen
feed per revolution
LookAhead with dynamic pilot control
Hour and piece counters
In the screen

Power supply 230 V
At the command console

Splash protection cover with fully encapsulated work area
With loading door, electrically fused, suitable for crane loading
Height 2500 mm above floor, incl. Machine light

Production package with high-pressure pump
consisting of:
- Chip conveyor (scratching tape)
Instead of coolant system with chip container
Ejection height 1050 mm, ejection to the left,
Container capacity 180 l, lifting pump mi tmax. 300 l / min at 1.3 bar
- Coolant system VRF250 / 1400
- Delivery height 1250 mm
- trough flush pump TG40-52 / 30285
- 1. Coolant pump TH45 / 30 2.2 kW covered 20 l / min at 11 bar
- 2. Coolant pump KTS-25-38T5KB 3,0 kW 20 l / min at 30 bar
- flushing pump TG 40-55 / 22285
- Vacuum pump covered
- with control cabinet without control
- Equipment according to delivery specification Siemens all electrical components
Motor, control, switchgear, Siemens or covered
Material identification according to Siemens seal with rotary seal
DIN43668 / 3 with double beard
Electrical connection 50 Hz: 400 V + / -10%
60 Hz: 400 V + / -5%

- Machine preparation
For internal flushing tools through the spindle
According to DIN 69871 form A40 or DIN 69893 HSK A63 *.
With rotary feedthrough on the engine hollow shaft,
Moisture sensor for monitoring leakage,
High pressure feed with built-in dirt trap,
Solenoid valve programmable via NC program.
* For HSK A63 we recommend the
Use of our patented coolant tube with strainer.
- Reduction of the clogging of coolant bores in the tools.
- Reduction of the wear of the O-ring seal in the clamping forceps
Installation elements
2 Additional equipment for the machine

High speed package
consisting of:
- Rapid speed 60 m / min in the X, Y and Z axes
- Speed ​​range: 20-12,000 min-1
- Thermodrive
Under normal circumstances, the machine must not be anchored to the floor
(For smooth floors we recommend an anchoring.)

Messtaster for automatic measurement in the machine
Renishaw Messtaster - MP10 package
- Measuring probe with optical contact module
Hollow cone HSK-A63
With built-in on / off switch


CNC Technik Friedrich

Contact person: Herr Christian Friedrich

Dürrer Berg 39

08309 Eibenstock, Deutschland

Last online: Yesterday

Registered since: 2015

46 advertisements online

CNC-Technik Friedrich ist Ihr professioneller Partner für CNC Lang- und Kurzdrehtechnik

Vertriebspartner der Marken TSUGAMI, BIGLIA, Rema Control, OKK, Drema Tools, HOBE und SCHLENKER.
Kompetenz in komplett Ausrüstung für Drehautomaten
optimale Beratung


  • deatchusgbfrbeesmxitplrubynluaeetrcanzieczdkfisenomtluligrltlvkzisptbrvearhuskromdsirsmealhrbgmkbailegininidkrjpthmyvncntwirbdafpkiq
  • Your request will be forwarded to all the dealers in this category. N.B.: This may result in a very large number of offers!


    Phone: 037752 69730
    Show phone number
    037752 69730
    Contact persons:
    Mr Christian Friedrich
    Machine ID:
    A3337747 at Machineseeker
    Add to watch list Edit Delete Share Report
    Try our Machineseeker app now!
    Machineseeker app for iPhone and Android.
    Want to really stop the chat history?
    Yes No
    Machineseeker chat
    Name E-mail Your message to the Dealer
      You are chatting with: 
      Your contact person: 
    Your contact is typing
      You are chatting with: 
      Your contact person: 
    Your contact seems to be inactive
    Chat window close