Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
4
Maximum bending length: 3000 mm Myspp Maximum sheet thickness: 1.25 mm steel Motorized upper cheek delivery via foot switch more
6
Bending machines / press / sheet bending machine/Schwenkbigemaschine ZGR-3140mm / 0.8 mm without roll shears sheet-bending machines is in Scala of degree of, Roman screws, front Schneidebegrenzter, rear rack, gas pressure spring equipped. the working length 3140 mm Steel sheet up to 0.8 mm the total weight of the bending machine is 400 kg wide light between bottom beam (solid) and upper bar (pushing) by 80 mm Bending angle of 145 ° The beam of 24 mm thickness complete machine Delivery t... more
5
-Schechtl KS 200 working width 2030 mm performance 1.0 mm bending angle display Bending angle limitation weight 650 kg -incl. focus rail 20 ° -incl. Rundschine 2 mm radius -Schechtl HT 200 Working width 2040 mm power 1.25 mm depth stop 500 mm 997s2lc9c Sheet holders extendable metal shelf graduations in cm on the Scissor table Weight 650 kg more
3
For sale is a bending machine with a width of 6 meters. 9onkcln2d Price is VB, for questions or if you are interested we are like always available! more
6
ZGR-3140/1,0 Our products are best quality and have certificate CE. Plate Bending Machine ZGR-3140\1,0 + additional equipment Technical data: - Maximum working width: 3140 mm - Sheet gauge up to: 1,0 mm (Steel) - Titan-Zinc-Plate 1,0 mm, Aluminium Plate 1,8 mm Cooper plate 1,5 mm - Max. bending angle: 145 degrees - Rotary shears cut to full working length - Thickness of bending bar: 20 mm - Protractor Wp0s28yli - Weight: 600 kg - Rotary shears (max. plate gauge 0,8 mm / Steel) - Th... more
4
Working width 2040 mm performance 1.5 mm bending angle display 9t80mwm8x Bending angle limitation weight 900 kg -BW usage bar = 68/24 -BW usage bar = 68/10 -OW = 20 ° focusing rail - and set more
6
Model ZGR RED 2200/0. 8mm with guide rail for the rolling scissors A new continuous upper cheek handle facilitates the handling. Technical data: the maximum working length: 2200 mm Bending capacity: 0.8 mm (steel) 1.2 mm (aluminium, copper, zinc) Bending beam thickness: 15 mm Bending angle: Max 140 degree Oberwangen opening: 80 mm Front attacks Angle stop for consistent bending angle A tool box attached behind the machine belongs to the standard equipment Outer dimensions L x W... more
4
Working width 2030 mm sheet thickness 1.0 mm for steel Degree display 2khni03r7 Bending angle limitation -high opening width more
6
Bending machine RED PLUS 2200/0.8 incl. rolling scissors Technical data: the maximum working length: 2200 mm Bending capacity: 0.8 mm (steel) 1.2 mm (aluminum, copper, and zinc) Bending angle: Max 140 degree Bending beam thickness: 15 mm Oberwangen opening: 130 mm Foot lever device for opening and closing the upper cheek Our folding base RED plus has a foot lever to open and close the upper cheek. You can therefore bend tool anywhere and you must not constantly fall on the lever... more


Folding m...
every day

New machines via email!

Be informed!
4
Working width 2030 mm sheet thickness 1.0 mm for steel Degree display Bending angle limitation 2nnm7xgue -high opening width -10 mm bending beam rail (Spengler rail) -20 mm bending beam rail more
6
ZGR-2140/0,8 with additional equipment (Rotary shears and Burnisher included !) Our products are of the best quality and have Certificate CE. Plate Bending Machine ZGR-2000\0,8 + additional equipment Technical data: Maximum working length: 2140 mm max. sheet metal thickness: 0,8 mm (steel) Titan-Zinc-Plate 0,8 mm, Aluminium Plate 1,5 mm Cooper plate 1,25 mm Max. bending angle: 145 degrees cutting with rotary shears on the whole working length max. bending edge: 15 mm 8g2rwy3 Protractor... more
3
Folding bench CIDAN SBL -Arbeitsbreite 2020 mm POWER ON 1.25mm -Fusspedal -Biegewinkelanzeige -Biegewinkelbegrenzung -Weight approx 400 kg Vgcpiqd more
6
ZGR-2140/1,2 with additional equipment (Rotary shears and Burnisher included !) Our products are best quality and have certificate CE. Plate Bending Machine ZGR-2140\1,2 + additional equipment Wp0adev7j Technical data: - Maximum working width: 2140 mm - Sheet gauge up to: 1,2 mm (Steel) - Titan-Zinc-Plate 1,2 mm, Aluminium Plate 2,0 mm Cooper plate 1,7 mm - Max. bending angle: 145 degrees - Rotary shears cut to full working length - Thickness of bending bar: 20 mm - Protractor - Weigh... more
5
Working width 2040 mm Sheet thickness 1.0 mm Bending angle limitation Bending angle scale Bdrpoup8y Weight approx. 650 kg more
6
Production of sheet metal working machines is for us always a special challenge, when it comes to the crux, connecting important aspects like dimension, quality, precision of execution and durability of the machine built into a meaningful and functioning whole. max. bending angle 145 degrees max. working length 3,64 m width 0,90 m Wp0gb3gn7 hight 1.30 m max. opening 80 mm thickness of steel plate 0.65 mm The rear tray is stable and easily during disassembly Front shock absorbers... more
4
Working width 2040 mm performance 1.0 mm bending angle display 7nqriw0ct Bending angle limitation weight 650 kg -OW = 20 ° focusing rail Foot pedal more
6
Plate Bending Machine ZGR-2640\0.8 + additional equipment Technical data: - Maximum working width: 2640 mm - Sheet gauge up to: 0.8 mm (Steel) - Max. bending angle: 145 degrees - Rotary shears cut to full working length - Thickness of bending bar: 24 mm - Protractor - Weight: 280 kg Rotary shears (max. plate gauge 0,8 mm / Steel) - The machine have certificate CE and 12 months warranty. Wp2a3gayx more
3
Working width 2040 mm performance 1.5 mm bending angle display Bending angle limitation weight 850 kg Mspfiiip -BW usage bar = 68/24 -BW usage bar = 68/10 -OW = 20 ° focusing rail more
6
Bending machine ZGR-2140/1.2 incl. rolling scissors and hand folding machine Warranty: 12 months. Certificate CE 2yyl3n Eccentric pressure that moves on both sides of the machines Working length: 2140 mm sheet steel 1,2 mm Non-ferrous metals the thickness of 30% more Beam: 24 mm Bending angle: 145 degree cut on the entire length of the work, lifting the upper cheek in three layers, maximum clear distance between the cheeks 80 mm rear rack to hold sheet metal, cutting width front give... more
6
Folding bench for sheet metal up to 0.8 mm without rolling scissors Delivery 100 euro Company: PROD-MASZ (high-quality brand in the roofing trade) Qxzuz7o2i Capacity: 2.14 M Accessories: gas springs, rear rack to hold the sheet metal, the "Roman" screws (screws) allow the setting of cheek pressure depending on the thickness of the sheet to be processed, eccentric pressure that moves on both sides of the machines, bending angle, cutting width front to ensure given before cutting limi... more
6
Bending machines / press / sheet bending machine/Schwenkbigemaschine ZGR-2140mm / 1.2 mm incl. rolling scissors and hand folding machine the plate bending machine is equipped in Scala of degree of, Roman screws, front Schneidebegrenzter, rear frame, gas pressure spring. the working length up to 2140 mm Steel sheet up to 1.2 mm our machines turn a copper plate as well as the aluminium sheet the total weight of the bending machine is 290 kg wide light between bottom beam (solid) and upper ba... more
6
Bending machines / press / sheet bending machine/Schwenkbigemaschine ZGR-2640mm / 0.8 mm incl. rolling scissors and hand folding machine will cost 1200 euro We have high-quality folding bench of 2640 mm/0, 8 mm. This machine guarantees high quality and agility of the exercised of the tilers work. The bending machine is equipped in Scala of degree of, Roman screws, front Schneidebegrenzter, rear rack, gas springs. the working length up to 2640 mm Steel sheet up to 0.8 mm our machines tur... more
6
RED2140T/0.8 + rolling scissors NK/0.8 + hand folding machine = 900 euro Year of constr.: 2017 Technical data: -maximum working width: 2140 mm -Bending performance: up to 0.8 mm (steel) -Titanium zinc sheet 0,8 mm, aluminum sheet 1.5 mm copper sheet 1.25 mm -Bending angle: Max 145 degree -Bending beam thickness: 15 mm -the lifting of the upper bar in three positions -Top beam stroke: 80 mm Wgfgrkjne -Scala of degree of -Weight: 180 kg The machine complies with the CE directives ... more
6
You are looking for a folding bench? You expect quality, reliability. You can rely on the expert advice and accurate, on-time delivery by the well-rehearsed ProdMasz team. Technical data: -maximum working width: 2140 mm -Bending performance: up to 0.8 mm (steel) -Titanium zinc sheet 0,8 mm, aluminum sheet 1.5 mm copper sheet 1.25 mm -Bending angle: Max 145 degree - the interface with the Rollenchere over the whole working width -Bending beam thickness: 15 mm -the interfac... more
6
We are your strong and competent partner in sheet metal processing machines. Especially the individual advice is one of our strengths. For the realisation of your individual project of construction machinery we are competently and reliably available. Technical data:-maximum working width: 3140 mm - bending performance: up to 0.8 mm (steel) - bending angle: Max 145 degree - bending beam thickness: 24 mm - the section with the Rollenchere over the entire working width - the lifting of the upp... more
6
Folding bench 3140/0.8 + hand folding machine + rolling scissors Technical data: -maximum working width: 3140 mm -Bending performance: up to 0.8 mm (steel) -Bending angle: Max 145 degree -Bending beam thickness: 24 mm -the interface with the Rollenchere over the whole working width -the lifting of the upper bar in three positions -Forward opening: 80 mm -Scala of degree of -Angle stop -Front and depth stops -Weight: ca. 400 kg -The rolling scissors (maximum cutting performance up to... more
6
Model: ZGR-3140/1,0 incl. rolling scissors and hand folding machine Technical data: -maximum working width: 3140 mm -Bending performance: up to 1.0 mm (steel) -Bending angle: Max 145 degree 2kog0vhqx -Bending beam thickness: 20 mm -the interface with the Rollenchere over the whole working width -the lifting of the upper bar in three positions -Forward opening: 80 mm -Scala of degree of -Angle stop -Depth stops -Weight: ca. 600 kg -The rolling scissors (maximum cutting performance... more
6
ZGR-2140 T/0.8 incl. rolling scissors and hand folding machine Technical data: Dlzdy8hbk -Working length: 2140 mm -Thickness - 0.8 mm, -Bending angle up to 145 *. -12 months of warranty -Lift the upper cheek in three layers -maximum 80 mm clear width between the cheeks -Non-ferrous metal 30% more thickness -Weight approx. 180 kg -Beam 15 mm -rear rack to hold of the sheet -Certificate CE -in the price incl. rolling scissors and hand hemming device Delivery cost is 100 euros C... more
6
Our qualified and motivated team, headquartered in Poland, manufactures machines for sheet metal processing. Our philosophy is to give our customers the best. A binding, open dialogue, which creates trust and security is especially important to us. ZGR-2140 L/0.8 + accessories (rolling scissors and hand folding machine incl. Bending angle: 165 Technical data: -maximum working width: 2140 mm -Bending performance: up to 0.8 mm (steel) -Titanium zinc sheet 0,8 mm, aluminium sheet 1,2 mm c... more
6
Our work is based on esteem, fairness and transparency. With these core values, we accompany our customers up to the achievement of the target. Hydraulic press brake Bank ZGR 2140 H/3.0 mm the maximum working length: 2140 mm Bending capacity: 3.0 mm (steel) Bending beam thickness: 30 mm Bending angle: Max 145 degree Oberwangen opening: 80 mm Weight: 1300 kg CE marking Xkf29q9u2 Warranty: 12 months Delivery: up to 4 weeks from date of order Cash on delivery Price: 7500.00 euro D... more
6
Model: ZGR-3140/1.0 with accessories Year: 2017 technical data:-maximum working width: 3140 mm - bending performance: up to 1.0 mm (steel) - bending angle: Max 145 degree - bending beam thickness: 20 mm - the section with the Rollenchere over the entire working width - the lifting of the upper bar in three positions - throat opening: 80 mm - degree Scala - angle stop - depth stops - weight: ca. 600 kg - the rolling scissors (maximum cutting performance up to 0.8 mm / steel) and manual folding... more
6
The satisfaction of our customers is our top priority. Qualitative and reliable work characterize us and are the rule for us. Technical data: maximum working width: 3640 mm bending capacity: 0.8 mm (steel) bending angle: 145 degree beam: 24 mm the rolling scissors over the whole working width lifting of the upper bar in three positions Lzgp9 Opening: 80 mm front and depth stops angle stop Gas pressure spring degree Scala Weight: approx. 850 kg the rolling scissors NK 0,8 has the maximum... more
6
Folding bench ZGR-2140/0.8 with rolling scissors and hand folding machine Direct from the manufacturer Technical data: -maximum working width: 2140 mm -Bending performance: up to 0.8 mm (steel) -Titanium zinc sheet 0,8 mm, aluminium sheet 1.0 mm copper sheet 1.0 mm -Bending angle: Max 145 degree -the interface with the rolling scissors over the whole working width -Bending beam thickness: 15 mm -the lifting of the upper bar in three positions -Top beam stroke: 80 mm Scala of degree ... more
6
ZGM-2140 / 1.2mm with a slide for the rolling scissors Ly2sxqrr maximum sheet thickness 1, 2 mm for steel sheet maximum working length 2140 mm maximum bending angle 145 degrees Weight approx. 1000 kg Forward - opening 80mm Gradcala, rear and front rack Delivery: up to 2 weeks Cash on delivery Delivery cost: 300 Euro We are looking forward to your inquiry! more
6
Press 2.64 m / 1.2 mm with the rolling scissors + HAND folding machine Warranty: 12 months. We deliver the goods with our own vans. Certificate CE Eccentric pressure that moves on both sides of the machines Working length: 2640 mm Steel 1,2 mm Non-ferrous metals 30% more bending performance Beam: 24 mm Bending angle: 145 degrees Weight: 350 kg Cut along the entire length of the work, Lift the upper cheek in three layers, maximum clear distance between the cheeks 80 mm rear rack t... more
6
The folding benches and RED plus by prod-Masz® G. Gwisdalla belong to the standard equipment of many craftsmen workshops and allow a convenient and simple sheet metal working on the construction site. Now have the designers of prod-Masz® their proven folding machines continued to improve: by using the hinges as well as the foot lever and the bending rail applications have been enhanced. A Cambering system allows a more accurate work. Technical data: the maximum working length: 2200 mm... more
6
Folding bench 3140/0.8 + hand folding machine + rolling scissors Hvlw3cp Technical data:-maximum working width: 3140 mm - bending performance: up to 0.8 mm (steel) - bending angle: Max 145 degree - bending beam thickness: 24 mm - the section with the Rollenchere over the entire working width - the lifting of the upper bar in three positions - throat opening: 80 - degree Scala - angle stop - front and depth stops - weight: ca. 400 kg - the rolling scissors (maximum cutting performance up to 0... more
5
sheet width:3060 mm plate thickness:4 mm distance between columns:3190 mm opening stroke:220 mm range of angles:+/- 90 ° Gxho9qfkq total power requirement:4 kW weight of the machine ca.:4,6 t dimensions of the machine ca.:4,19 x 0,90 x 2,06 m more
4
Technical data: -Bending is supported by hand by counterweight -Clamp the upper cheek over side eccentric lever - Max working width 2040 mm -maximum material thickness St 40 1.00 mm -Bending angle adjustment via end-stop 10-180 ° M8f7b -Max stroke of clamping beam approx. 70 mm -maximum adjustability beam 10 mm -Space requirement approx. B 2800 x H T 1200 x 900 mm -Weight approx. 520 kg more
5
Make: folding Langbank BAIER 6.1 ME bending master, BJ 1978 bending length: 6000 mm Sheet thickness: 1 mm Depth: horizontal 750mm, in the slope above 1000 mm Space requirements: L 6750 mm x D 1250 mm x H 1400 mm Weight: approx. 1, 7T Accessories: manual roller shear, Tin Edition rust, bending angle scale adjustable - and away swing, folding fixed - fold forming The machine is being sold because of a new acquisition, is in very good used condition and works perfectly. The machine was boug... more
1
Length 6000 mm Tysiuxlfz Sheet thickness 1 mm more
3
Sell folding machine incl. Electric plate turning. Bending length: 8020 mm Ylqzq79q2 Bending capacity: 2 mm steel Electric shears Bending programs: 8 Electrical sheet turner Manual Gradeistellung Machine is compl on request. rev. more
5
: Mezd9 weight:5500 kg table dimension - longitudinal:4060 mm working diameter:3 mm output:7,5 kw more
4
Technical data: -Max working width 6050 mm -Max material thickness at 40 kp / mm² strength. -Steel 1.0 mm 20 kp / mm² strength, -Aluminium 1.5 mm 80 kp / mm² strength, V4A to 0.6 mm -Bending angle stop - insertion depth up to 800 mm - roller cutter - space requirement approx. B 6400 x H 1550 x D 1700 mm -Weight 1500 kg 9su7s3nwe more
6
Technical data of our Abkantmachine: the maximum working length 2140 mm the maximum thickness of the steel plate for 0.8 mm Beam 15 mm Weight about 180 kilograms of hand machine the cut with the scissors on the entire work length of lifting of the upper bar in three layers the maximum clear width between the bars 80 mm we supply our products to Germany and Ősterreich with our own Lieferwage n. shipping throughout Germany: 100 euro Cash on delivery Usblusmuz We speak both German and Engli... more
6
New machine of company "Prod-Masz" stands for sale By using the hinges as well as the foot lever and the bending rail, the applications have been extended. A Cambering system allows a more accurate work. Technical data: Ghjakr7rw the maximum working length: 2700 mm Bending capacity: 0.8 mm (steel) 1.2 mm (aluminum, copper, and zinc) Bending angle: Max 140 degree Bending beam thickness: 15 mm Oberwangen opening: 130 mm Rolling scissors incl. Foot lever device for opening and clos... more
1
-Arbeitsbreite: 2040 mm -Blechdicke: steel sheet: 0.63 mm, Alu: 1.00 mm copper: 0.80 mm DIN rails 20, R = 1.50 mm -wechselbare upper rail -Biegewange lowered -Sicherheitsvorrichtung scale with lock bending angle for the left and right standard execution with frame and castors -Weight: 139 kg machine is in stock Thq3wq9t0 more
6
The bending Bank ZGR 4140 / 0.7 + rolling scissors NK/0.8 + smooth rolling machine is very solid constructed and built, well suited to the processing of zinc, aluminum and copper in the common strengths. Even standing seam production is possible without further ADO. All in all a very good choice for a fantastic price! Technical data: -maximum working width: 4140 mm -Bending performance: up to 0.7 mm (steel) -Bending angle: Max 145 degree -Bending beam thickness: 20 mm -the interface wi... more


Folding m...
every day

New machines via email!

Be informed!

to

to

Change search

SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close