Zanasi Srl

Condition: good (used), Year of construction: 2019, functionality: fully functional, volume flow: 8.64 m³/h, filter area: 120 m², suction capacity: 12,000 m³/h, Equipment: type plate available, Extraction capacity: 6,000–8,640 m³/h Max. fan capacity: 12,000 m³/h Total filter surface: 120 m² Number of filter elements: 12 Operating hours: 2.045 Featured with: - Central welding fume extraction and filtration system - Filter material ePTFE membrane - Automatic compressed-air filter cleaning - W3 Welding fume class Iodpez Tdfyefx Ap Dsbc - Touchscreen control - Additional extraction point Country of origin: Germany Motor power: 7.5 kW Machine (L×W×H): 370 × 190 × 280 cm Machine weight: 1.220 kg

Condition: excellent (used), Year of construction: 2013, machine/vehicle number: HN-ALU, DEMAG ALUMINUM overhead crane, span approximately 3x2m Load capacity / lever load: 500 KG - 0.5 tons Technical data of the system: Crane track made of Demag aluminum rails, 180mm Iodez Tdftspfx Ap Dobc The system is delivered complete: Rails, travel units, end plates, cable carrier, etc. Includes a 500kg Kito chain hoist. The crane is disassembled and immediately available. Very good condition, see pictures. The item is located in 75053 Gondelsheim. Shipping via freight forwarder or collection by appointment only. Demag KBK1, KBK2 and KBK3 rails are in stock! Demag KBK systems are also available. Load capacity 125KG - 1600KG. Please inquire about your crane track with overhang load and dimensions.

Condition: as good as new (ex-display), 7250 Lleal Reception Trough,Double Sigma Kneader MIxer,1500L Industrial Screw Discharge Buffer Tank, 2022, Used machine Manufacturer: Lleal, S.A. Equipment: Reception Trough Model / Capacity: I500 L Year of manufacture: 2022 Serial / Item number: 18725/2 / 5904 Electrical connection: 400 V, 3 Phase + N + PE, 50 Hz, 59 A Total power: 30.25 kW Condition: Used, like-new industrial condition Technical and operating parameters: Operating principle: Buffer and reception trough with bottom discharge extruder screw (without mixing blades) Discharge screw drive: approx. 30 kW Safety standards: CE marked, 2006/42/CE Machinery Directive Design, Operation: High-capacity 1500-liter industrial reception and buffer trough manufactured by Lleal. Designed without agitators or mixing blades, its primary function is to store high-viscosity or paste-like materials and transfer them continuously and smoothly using the integrated 30 kW bottom discharge screw to downstream packaging or processing equipment. Suitable Application Areas: Receiving and buffering pastes, doughs, or viscous masses discharged from kneaders/mixers. Intermediate storage and controlled feeding in chemical, pharmaceutical, and food process lines. Dosing and conveying heavy, non-flowing materials. 7251 - Lleal AME-1250-SF Industrial Extruder Kneader Mixer, 2022 Lleal AME-1250-SF Industrial Extruder Kneader Mixer, 2022 Manufacturer: Lleal, S.A. Model: AME-1250-SF Year of manufacture: 2022 Serial / Item number: 18725/1 / 5104 Electrical connection: 400 V, 3 Phase + N + PE, 50 Hz, 173 A Total power: 90.25 kW Design: ATEX / Ex Explosion-proof execution (Group II) Condition: new, like-new industrial condition Overall dimensions (A x B x C): 4143 x 2635 x 1950 mm Mixing tank volume: Useful volume: 750 liters Total volume: 1400 liters Technical and operating parameters: Mixing blade drive: 2 pcs mixing motors, total 60 kW Extruder screw drive: 30 kW Operating principle: Heavy-duty Sigma/Z-blade kneader-mixer with integrated bottom discharge extruder screw Safety standards: CE marked (0163), 2006/42/CE Machinery Directive, and 2014/34/UE ATEX Directive Design, Operation: Top-tier high-capacity industrial Lleal AME-1250-SF extruder kneader mixer. In the 1400-liter total capacity bowl, powerful twin mixing blades driven by 60 kW total power homogenize highly viscous, dense materials. Following the process, the 30 kW bottom discharge extruder screw efficiently empties and shapes the product without air entrapment. Suitable Application Areas: Isdpfxsz Tdd Aj Ap Dobc Large-scale chemical and pharmaceutical processing of dense pastes, adhesives, and sealants. Heavy-duty plastics, rubber, silicone, and resin compounding and homogenization. Industrial food and cosmetics processing of heavy doughs, creams, and viscous masses

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: DN231, ABUS ZHB overhead crane system with dimensions approximately 7.8 x 6 m (6 m span) Load capacity / lifting capacity: 500 kg - 0.5 tons Technical data of the system: Crane system consisting of ABUS HB200 rails with 2 drive units System is delivered complete: HB rails, rail connectors, trolleys, drive units, end plates, supports/hangers, etc. including 500 kg ABUS chain hoist Ibodez Tddcopfx Ap Djc Length of steel structure: approximately 8.5 m Overall width (outer edge of steel structure): approximately 5.2 m Total height of crane: approximately 4.87 m Top of rails: approximately 4.3 m Bottom of rails: approximately 4.08 m Top of bridge: approximately 4.02 m Bottom of bridge: approximately 3.81 m Hook height: approximately 3.7 m Supports: HEB120 with 40x40 cm base plates, rails: INP260 Crane is disassembled and available immediately Used condition, see pictures Item location: 75053 Gondelsheim Shipping via freight forwarder or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems are also available. Load capacity: 125 kg - 1600 kg Please request a non-binding quote for your overhead crane system, specifying the load capacity and dimensions.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, type of input current: three-phase, control type: manual, total height: 1,400 mm, total length: 1,640 mm, total width: 750 mm, overall weight: 295 kg, Equipment: CE marking, cooling unit, lighting, Technical specifications: Bevel cutting on two sides, Cutting speed: 40/80 m/min, Motor power: 0.9/1.4 kW; 400 V / 50 Hz, Machine dimensions (L x W x H): 1640 x 750 x 1400 mm, Machine weight: 295 kg, Saw blade dimensions: 2710 x 27 x 0.9 mm, Working height: 900 mm, Cutting range (90°): Ø 235 mm (300 x 200 mm), Main motor: 400 V, 50 Hz, 0.9/1.4 kW, Pump motor: 400 V, 50 Hz, 0.05 kW, Belt speed: 35/70 m/min, Vice working height: 900 mm, Coolant tank capacity: approx. 15 l. The saw is in very good technical condition and can be tested at our warehouse in Přerov. Iodpjz Tdcxofx Ap Djbc

Condition: excellent (used), Live tools for cnc lathe Moriseiki NL-2500 NL-3000 NLX-2500 SL-150 SL-65 SL-75 ZT-1000 ZT-1500 MT-1000 MT-1500 Daewoo Ibodpoz Tdcrofx Ap Dec Puma 700LM Nakamura WT-150 WT-300 Mazak Hyperturn 4500

Condition: used, Year of construction: 1982, functionality: fully functional, total length: 2,575 mm, total width: 1,110 mm, total height: 1,450 mm, type of input current: three-phase, overall weight: 1,550 kg, Accessories: 200 mm chuck, rotating center for the tailstock, micrometer stop for longitudinal feed, chip and coolant emulsion tray including pump, lighting, technical documentation. Basic technical parameters: Swing over bed 400 mm, Swing over carriage 220 mm, Swing in gap 600 mm, Gap width 230 mm, Turning length 1000 mm, Spindle bore 50.5 mm, Spindle taper Morse 6, Tailstock center taper Morse 5, Spindle speeds: Number of steps 12, Range 1st range 45-2000 rpm, 2nd range 22-1000 rpm, Maximum tool section 30 x 20 mm, Max. workpiece weight clamped in centers 300 kg, Main motor power 5.5 kW, Machine dimensions L x W x H: 2575 x 1110 x 1450 mm, Machine weight 1550 kg. The machine can be viewed and fully tested in our warehouse in Přerov by prior arrangement. Iodsz Tdcfepfx Ap Djbc

Condition: excellent (used), functionality: fully functional, Year of construction: 1992, machine/vehicle number: DN2349, Demag hall crane, portal crane, suspended monorail including steel structure with floor-level control Dimensions of the steel structure: approximately 7.5 x 4 m, with 1 Demag bridge crane, 2 tons Useful load/lifting capacity: 2000 kg - 2 t Ibedpsz Tdb Usfx Ap Dec Technical data of the system: Crane track/steel structure consisting of HEB160 and IPE300 beams Length of steel structure: approximately 6 m Length of travel rails: approximately 7.5 m Overall width of steel structure: approximately 4 m Overall height of crane: approximately 4.64 m Top of travel rails: approximately 4.4 m Bottom of travel rails: approximately 4.15 m Hook height: approximately 3.2 m System is delivered complete: Steel structure/supports made of HEB160 (approximately 10 cm embedded in concrete), travel rails IPE300 including power rail/power supply 1 single-girder crane with 2000 kg Demag PK10 chain hoist with floor-level control Crane is dismantled and immediately available The location of the item is 75053 Gondelsheim Very good condition, see photos Shipping by freight forwarder or collection only by prior arrangement.

Condition: excellent (used), functionality: fully functional, Year of construction: 1992, machine/vehicle number: DN2216, Demag ELV Hall Crane, Portal Crane, Bridge Crane incl. steel structure with floor control. Steel structure dimensions approx. 22.5 x 8.9m with 1x Demag bridge crane 3.2 tons - gauge 8.55m. Payload/lifting capacity 3200KG, 3.2t Technical data of the system: Crane track/steel structure consisting of HEB300 beams (running rails) with 8 U240 supports. Beams were cut flush with the floor, as they were cast into the concrete. Length of steel structure approx. 22.55m Overall width (outer edge of steel structure) approx. 8.9m Total height of crane approx. 4.75m Top of running rails approx. 4.3m Bottom of running rails approx. 4.0m Top of bridge approx. 4.75m Bottom of bridge approx. 4.33m Hook height approx. 3.6m Gauge approx. 8.55m Support spacing: See sketch Ibsdpfx Aoz Tdbnop Dec (Left 6.75 + 6.75 + 7.8 – center to center) System is delivered complete: Steel structure / supports made of U240, running rails HEB300 incl. power rail/power supply 1x single-girder crane with 3200kg Demag PLV wire rope hoist with floor control Crane is disassembled and immediately available. The location of the item is 75053 Gondelsheim. Very good condition, see pictures. Shipping by freight forwarder or collection only by prior arrangement.

Condition: ready for operation (used), Year of construction: 1997, input voltage: 415 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, operating speed: 7 mm/s, reverse speed: 50 mm/s, table length: 4,000 mm, throat depth: 500 mm, total length: 4,200 mm, total width: 1,800 mm, total height: 2,500 mm, overall weight: 11,000 kg, year of last overhaul: 2026, Equipment: documentation/manual, safety light barrier, CNC Megoform PB 40-130 Upstroke press brake. Serial Number 0622183 - 25/09/97 4000 mm (4 meters) working bed length. Tonnage / Capacity: 135-ton capacity Daylight (without tools) 340mm Side frame throat depth 500m Advance speed 37mm/s Working speed 7.5mm/s Return Speed 50mm/s Approx weight 11,000 Kgs Shipping dimensions L 4400mm , W 1800mm , H 2500mm Hurco auto bend 7 cnc controller X & R axis auto set , Z axis manual set Iedpsz Tdbhsfx Ap Debc Light guard

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, machine/vehicle number: DN-ZLK-5to, ABUS ZLK Hall Crane, Portal Crane, Bridge Crane, incl. steel structure with floor control Dimensions of steel structure approx. 12.5 x 19m with 1x Abus double-girder bridge crane 5.0 tons - gauge 11.75m Useful load/lifting capacity 5000KG Technical data of the system: Crane track/steel structure consisting of 4 HEB300 beams (running rails) with 6 supports HEB300 Beams were cut flush with the floor, as they were embedded in concrete. Length of steel structure approx. 19m (2x 8.5m) Overall width outer edge (steel structure) approx. 12.5m Total height of crane approx. 5.7m (top of hoisting unit) Top of running rails approx. 4.81m Bottom of running rails approx. 4.43m Top of bridge approx. 5.5m Bottom of bridge approx. 4.66m Hook height approx. 4.4m Gauge 11.75m Support spacing: See sketch (Left 8.9m + 8.9m - center to center) System is delivered complete: Steel structure / supports made of HEB300 beams, running rails HEB300 incl. power rail/power supply 1x double-girder crane with 5000kg Abus wire rope hoist with floor control Crane is disassembled and available immediately Ibsdpoz Tda Dofx Ap Doc The location of the item is 75053 Gondelsheim Very good condition, see pictures Shipping by freight forwarder or collection only by appointment.

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 1,800 mm, stack height: 1,500 mm, Think Green, Box On Demand, pay attention to your CO2 footprint. The machine for processing continuous corrugated board, listed here, belongs to the series of statically operating machines, meaning that the operations performed across the width of the machine are carried out on the stationary cardboard. The machine is designed for high productivity. The maximum working width of the cardboard is 1,800 mm. All tool settings are performed automatically. 1) Main machine body (cardboard cutting machine): Linear cross-cutting group for head/foot cuts and cross cuts on the cardboard. Linear cross-scoring group for cross scoring on the cardboard. (Delivered as a cross scorer, cross scorer with perforation option) 8 sets of longitudinal scoring groups from above for longitudinal scoring on the cardboard. 8 sets of longitudinal cutting groups for performing longitudinal cuts. Ibodoz Tdaqjpfx Ap Djc 2) Cardboard changer, 4-cassette feeder A motorized cardboard changer, operated with a lifting shaft, is used to feed the cardboard into the cardboard infeed of the main machine body, using 4 individual cassettes. Each cassette is capable of accommodating a web width of raw material up to a maximum of 1,800 mm and automatically feeding it to the main machine body on request from the machine control. 3) Cardboard magazines, 4-fold 4 cardboard magazines provide and feed the raw cardboard to the processing machine. Stack height of continuous corrugated board up to max. 1,500 mm possible. 4) Control cabinet, control system, electronics: Contains all the components required to operate and control the system. The control cabinet components are based on Siemens.

Condition: excellent (used), functionality: fully functional, PYE 250 S1 hydraulic press. Iedpjz Tc U Tefx Ap Dsbc

Condition: used, mileage: 563,198 km, power: 315 kW (428.28 HP), first registration: 04/2015, fuel type: diesel, number of seats: 59, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, power assisted steering, traction control, trailer coupling, = Additional options and accessories = - Autoradio - Climate control Ijdpez Tc U Hefx Ap Dobc - Coffee-machine - Double glazing - DVD - EBS - Electrically operated mirrors - GPS navigation - Heater - Hydraulic power steering - Individual air cooling - Individual lighting - Kitchen - Portable radio set - Refrigerator - Reverse camera - Sun visor - Tachograph - TV/Video = More information = Engine capacity: 10.680 cc Dimensions (LxBxH): 1393 x 255 x 377 cm Make of engine: Mercedes Benz Tyre tread remainder on axle 1: 30% Availability: in stock

Condition: good (used), Year of construction: 2005, operating hours: 33,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Okuma, controller model: OSP E100, table width: 500 mm, table length: 500 mm, rotational speed (min.): 10 rpm, rotational speed (max.): 15,000 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 40 bar, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, Horizontal machining center Okuma MB 500H with a 2-position pallet changer Year of manufacture: 2005 Control system: Okuma OSP E100M Technical data: Spindle speed: 10 - 15,000 rpm Drive power: 26 kW Tool holder: BT 40 Number of magazine positions: 60 Internal coolant pressure: 70 bar Travel distances: X-axis: 800 mm Y-axis: 800 mm Z-axis: 800 mm 4th axis: Index 1° Number of pallets: 2 Pallet size: 500x500 mm Ibedpfx Apsz Tc Uys Dec Accessories: - Coolant system, type ConSep 2000, by Mayfran - Chip conveyor, type ConSep, by Mayfran - Tool breakage monitoring in the magazine - Workpiece coolant shower

Condition: good (used), Year of construction: 1998, functionality: fully functional, CNC turning machine EMCOTURN 365 MC with counter spindle Iedpjz Tc Utjfx Ap Dobc Year of manufacture: 1998 Control system: Sinumerik 840D Accessories: - Parts collector - Chip conveyor Further details to follow Includes a wide range of accessories.

Condition: good (used), Year of construction: 2011, operating hours: 18,000 h, functionality: fully functional, turning length: 740 mm, turning diameter: 430 mm, spindle bore: 65 mm, travel distance X-axis: 280 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 750 mm, rotational speed (max.): 5,000 rpm, rotational speed (min.): 10 rpm, bar passage: 65 mm, overall weight: 8,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Turn-milling center EMCO HYPERTURN 665 MC Plus Year of manufacture: 2011 Control system: Sinumerik 840D Operating hours: 18,300h (according to hour meter) Technical data: Main spindle speed: 0 - 5,000 rpm Drive power: 21/29 kW (100/40%) Torque: 250 Nm Spindle mounting: KK6 Bar diameter: 65 mm Counter spindle speed: 0 - 7,000 rpm Drive power: 17/21 kW (40/100%) Torque: 130 Nm Spindle mounting: KK6 Ibsdpjz Tc Umjfx Ap Dec Milling spindle speed: Mounting: Capto C4 Number of magazine positions: 23 Travel ranges: X1/Z1: 280/750 mm X”/Z2: 205/750 mm Y-axis: +/- 50 mm Lower turret: Mounting: VDI 30 Number of positions: 12 Number of powered tools: 12 Accessories: - Emco short magazine LM 1200 - Chip conveyor - High-pressure coolant system - Parts catcher - Extensive equipment with tool holders

Condition: used, power: 250 kW (339.91 HP), first registration: 04/2019, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,400 mm, fuel: diesel, emission class: euro6, number of seats: 2, total length: 9,350 mm, total width: 2,500 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Year of manufacture: 2019 Maximum front axle load: 7,500 kg Maximum rear axle load: 11,500 kg Number of cylinders: 6 Engine displacement: 10,837 cc Unladen weight: 8,205 kg Payload: 11,895 kg Gross vehicle weight (GVW): 20,100 kg Value-added tax/differential tax: VAT is deductible = Company information = Ibsdoz Tc Uaspfx Ap Dsc Hello

Condition: used, Year of construction: 2001, Strausak Fleximat 91L Technical Data Axes: X / Y / Z / B / C Travel distances X / Y / Z: 360 / 240 / 360 mm Rapid traverse rate X / Y / Z: 10,000 mm/min Grinding spindle speed: 1000–9000 min-1 Grinding wheel diameter max.: 160 mm Grinding spindle drive: 4 kW at 4000 min-1 Grinding spindle mount: STRAUSAK taper 1:5 Grinding spindle torque max.: 7 Nm Workpiece spindle mount: ISO 50 Center height: 125 mm B-axis: Swiveling range: 470° B-axis: Rapid traverse rate max.: 4000°/min C-axis: Rotation range: Continuous C-axis: Angular speed max.: 14,400°/min Smallest input unit X / Y / Z: 0.001 mm Ijdpfxoz Tc T Ne Ap Djbc Smallest input unit B / C: 0.001° Connection, weight, and dimensions Connected power: 12 kW Electrical connection: 3 × 400 V / 50 Hz Equipment and scope of supply Loading device Related accessories as shown in the photos Loading device and related accessories as shown in the photos. Technical data is subject to change without notice. Errors and prior sale are reserved. The properties and scope of supply agreed upon in the purchase contract shall apply.

Condition: like new (used), Year of construction: 2015, operating hours: 1,000 h, functionality: fully functional, Equipment: documentation/manual, DMG MORI / SAUER GmbH ULTRASONIC 20 Machine Data Control system Heidenhain Axes 5 (X / Y / Z / A / C) Travel ranges X / Y / Z 200 / 200 / 280 mm Spindle speed max. 42,000 rpm Tool holder HSK-E32 Tool magazine 24 Rotary table Ø 190 mm Table load capacity, center 10 kg A-axis -5° / +130° C-axis 360° Rapid traverse 40 m/min Ijdpfx Apoz Tc Tvo Dsbc Footprint L × W × H 2,020 × 2,196 × 2,385 mm Fuse rating 63 A Feed drive X / Y / Z Synchronous linear motors Feed rate max. 40,000 mm/min Input resolution 0.001 mm C-axis speed max. 150 rpm Table clamping Pneumatic / mechanical Tool length max., from spindle nose 200 mm Tool diameter max., automatic tool changer 40 mm Compressed air supply 6–10 bar Air consumption without tool blowing 12 m³/h Additional consumption with continuous tool blowing 25 m³/h Connection, weight, and dimensions Electrical connection 400 V / 50–60 Hz Machine weight 3,900 kg Tool weight max., automatic tool changer 1 kg Total weight of magazine tools max. 24 kg Compressed air connection min. Ø 12 mm Equipment and scope of supply 15 tool holders and other related accessories as shown in the offer photos are included. Technical data is subject to change without notice. Errors and prior sale are reserved. The specifications and scope of supply agreed upon in the purchase contract shall be the basis.

Condition: used, Year of construction: 2013, operating hours: 51,438 h, functionality: fully functional, turning length: 2,000 mm, turning diameter: 630 mm, spindle motor power: 34 W, spindle speed (max.): 4,000 rpm, spindle bore: 102 mm, travel distance X-axis: 650 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 2,050 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 40 m/min, type of input current: AC, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 30 m/min, total height: 2,670 mm, total length: 7,601 mm, total width: 4,215 mm, spindle nose: 220h5, overall weight: 24,000 kg, Equipment: documentation/manual, Control system: Siemens 840D sl with ShopTurn Year of manufacture: 2013 Spindle hours: 16,310 Location: Germany Equipment: -Main spindle ISM 102 -Counter spindle ISM 102 -Milling spindle HSK63A 12,000 rpm Ibedpfxjz Tc Tpo Ap Dec -Eccentric turning and milling -Milling of gears using the involute method -Easy Tool Monitor for Siemens control system -Chuck flushing system, external -Chuck flushing system, counter spindle -Differential pressure monitoring for H-spindle -Differential pressure monitoring for C-spindle -Coolant supply through the counter spindle -Partially hollow chuck, Ø 104 mm -Tailstock function for the counter spindle -Rest support for rest 30-245 mm -Rest slide, NC-controlled -BFA 8/20/80 bar, 980 l, cooler -Hinged belt chip conveyor -Automatic sliding hood, electric -Tool measuring device -Chain magazine for 120 tools HSK63A -Signal light, 4-way -Cleaning of the safety glass -Coolant spray gun -Control cabinet lighting -Oil mist separator Including the following overhaul/repair measures: -General overhaul of main spindle S1 HSK 63 12,000 rpm -Replacement of safety glass -Replacement of hoses (pneumatics, cooling system, CNC)

Condition: used, mileage: 1,583,297 km, power: 302 kW (410.61 HP), first registration: 07/2008, fuel type: diesel, tire size: 315/70 R22.5, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: other, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 12, emission class: euro5, suspension: other, number of beds: 2, total length: 6,100 mm, total width: 2,550 mm, total height: 3,800 mm, Equipment: ABS, air conditioning, airbag, cruise control, electric window regulation, fridge, parking heater, power assisted steering, second fuel tank, spoiler, = Additional options and accessories = - Aluminum fuel tank - High Beams - Immobilizer - Radio/CD/Audio system Ibodpjz Tc Tiofx Ap Doc - Roof Spoiler - Sleeping cabin - Sun visor = More information = Year of construction: 2008 Tyre size: 315/70 R22.5 Front axle: Steering; Suspension: parabolic suspension Rear axle: Double wheels; Suspension: air suspension Empty weight: 7.500 kg Carrying capacity: 13.000 kg GVW: 20.500 kg

Condition: excellent (used), Year of construction: 2012, Machine data Year of manufacture: 2012 Control system: Mitsubishi Spindles: Main and counter spindle Y-axis: Available Tool turret: 8 stations Bar feeder: LNS Sprint 542 Full load current: 84 A Connection, weight and dimensions Machine weight: 3,000 kg Voltage / phases / frequency: 200 V / 3~ / 50–60 Hz Ijdpfx Ajz Tc S Eep Djbc Connection power: 29 kVA Equipment and scope of supply Main and counter spindle Y-axis Tool turret with 8 stations LNS Sprint 542 bar feeder Basic set of tool holders; the exact scope of holders will be listed in the quotation. Further accessories belonging to the machine, as shown in the offer photos. LNS Sprint 542, basic set of tool holders and further accessories belonging to the machine, as shown in the offer photos. Exact scope of holders as per quotation. Technical specifications are subject to change without notice. Errors and prior sale excepted. The properties and scope of supply agreed upon in the purchase contract shall be binding.

Condition: used, mileage: 1,119,061 km, power: 338 kW (459.55 HP), first registration: 01/2008, fuel type: diesel, tire size: 315/60 R22.5, axle configuration: 4x2, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 12, emission class: euro5, suspension: other, total length: 6,100 mm, total width: 2,550 mm, total height: 3,900 mm, Equipment: ABS, air conditioning, airbag, cruise control, electric window regulation, fridge, power assisted steering, second fuel tank, spoiler, = Additional options and accessories = Ibedpfez Tc Sxjx Ap Dec - Aluminum fuel tank - Immobilizer - Roof Spoiler - Sleeping cabin - Sun visor = More information = Year of construction: 2008 Tyre size: 315/60 R22.5 Front axle: Steering; Suspension: parabolic suspension Rear axle: Double wheels; Suspension: air suspension Empty weight: 7.695 kg Carrying capacity: 10.905 kg GVW: 18.600 kg

Condition: excellent (used), Year of construction: 2008, Machine Overview Makino V22, manufactured in 2008, with a 40,000 rpm spindle, HSK-E32, and 60 tool positions. This compact 3-axis machining center offers travels of 320 × 280 × 300 mm and a Makino Pro-5 control system based on Fanuc. Technical Data Manufacturer / Model: Makino V22 Year of Manufacture: 2008 Axes: 3 Travel (X / Y / Z): 320 / 280 / 300 mm Control System: Makino Pro 5 (Fanuc System) Spindle Speed: 40,000 rpm Tool Interface: HSK-E32 Cooling: External air and external cooling Table: Makino T-slot table Maximum Table Load: 100 kg Rapid Traverse: 20 m/min Tool Magazine: 60 positions Operating Hours: 20,712 hours Spindle Counter: 2,266 hours Fuse Rating: 63 A Footprint (L × W × H): 1,500 × 2,000 × 2,250 mm Connection, Weight, and Dimensions Electrical Connection: 400 V / 50 Hz Machine Weight: 4,200 kg Equipment and Scope of Delivery Length measuring device (hybrid) Measuring probe: Marposs and handwheel Ibsdsz Tc Srepfx Ap Dec REVEN X-CYCLONE CE17-3 Kraft-& Bauer CO₂ fire extinguishing system Hot-shot shrinking device Tool holders and other related photo accessories All accessories belonging to the machine, as shown in the offer photos, are included. Technical data subject to change without notice. Errors and prior sale are reserved. The characteristics and scope of delivery agreed upon in the purchase contract shall be binding.