Teciman

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, 3D Coordinate Measuring Machine | Brand: MAUSER/ZEISS | Type: KMZ-G 602520 | Year of manufacture: 1988/2003 Optionally available with an air-conditioned hall. The machine has been calibrated regularly by ZEISS. The last calibration was performed on August 7, 2025, the next calibration (recommended) is scheduled for August 2026. TECHNICAL SPECIFICATIONS:: Measuring ranges (Length x Width x Height): 6.000 x 2.500 x 2.000 mm Travels: - X-axis: 6.000 mm - Y-axis: 2.500 mm - Z-axis: 2.000 mm - Length measurement uncertainty according to VDI/VDE 2617: U3 = (5,0 + L/250)µm, V2 = 3,5 µm - Length measurement uncertainty according to ISO 10360-2: MPE_E = (5,0 + L/250)µm - Environmental conditions for maintaining the specified accuracy: * Temperature range: 21°C +/- 3°K * Temperature fluctuation: 0,5°K/h, 1,0°K/d, 0,5°K/m - Environmental conditions for operation: * Temperature range: + 15°C up to 35°C * Humidity: 30 up to 70% General features, Equipment: - Portal measuring machine with ultra-precision guides and ball-screw drives - Second Y-axis with granite guideway and air bearing - High-resolution Zeiss scales - Positive-drive mechanisms in all three axes - Collision protection for the quill and probe head (for VAST-TK) for manual and setup modes Bjdey Iub Sspfx Akxelg - Safety position for crane interlock - Reference temperature compensation - Microcomputer control - Practice piece: cube, star-shaped stylus - Reference probe D = 8 mm, length: 115 mm - Reference standard D = 30 mm - includes basic software package - Load-bearing capacity: Limited only by the foundation design - Measuring system: VAST - Software: Zeiss CALYPSO - Documentation Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale -

Condition: used, Year of construction: 2010, functionality: fully functional, Including probe styli (Renishaw), including calibration sphere, including Renishaw SP23M probe head, including PC with Mcosmos 4.33 software, complete with the relevant software CD and dongle. The device has been professionally secured and packaged for transport by MITUTOYO. All necessary transport locks are installed and included in the delivery. Bjdpfxoy Ipume Akxelg

Condition: good (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 14065, measuring range X-axis: 640 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 300 kg, total height: 2,320 mm, type of input current: AC, total width: 940 mm, total length: 1,040 mm, travel distance X-axis: 640 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, input voltage: 230 V, travel speed (max.): 60 mm/min, Equipment: type plate available, Retrofit configuration 2020 with Aberlink joystick with color display €12,614.00 Precision coordinate measuring machine, CNC-operated, with MH20i/Renishaw probe & software. Fully functional, immediately available. Measuring range X = 640 mm Measuring range Y = 600 mm Measuring range Z = 500 mm Function: CNC Cedmdn Tswb Dn Uop Dsra Bedpsy Iptcjfx Akxslg Resolution 0.5 μm Max workpiece weight 300 kg Max. traverse speed 600 mm/sec² Air requirement min. 5 bar Dimensions L = 1040 mm Dimensions W = 940 mm Dimensions H = 2320 mm Type X-axis Y-axis Z-axis Accuracy Max. workpiece weight Year of manufacture: 2012 Calibrated: 2023

Condition: excellent (used), Year of construction: 2006, Carl Zeiss Contura G2 7/10/6 VAST XT Gold Technical data: Measuring range: X=700mm, Y=1000mm, Z=600mm Controller: C99 with BP26_SE control panel Last calibration: 05/2025 Retrofit Equipment: 8-fold MSR probe changer system Probe changer rack Probe accessories Calibration sphere HP Z4 WIN11 workstation with monitor Calypso software Bsdpfxjy Ia Tao Akxelg Options: Planner, IGES in/out additional accessories

Condition: used, functionality: unexamined, Dear Sir or Madam, We are pleased to offer the following machine for sale: Keyence XM-5000 coordinate measuring machine. The machine is sold with the equipment shown in the photos and listed in the advertisement text. Bodpfx Asy Iaayokxslg Location: 40764 Langenfeld PLEASE NOTE! The equipment originates from an insolvency. We are auctioning this off to the highest bidder on behalf of the creditor/bank. This is a closed auction. We do not provide any information regarding the current highest bid. Your bid becomes binding upon receipt by email. Please submit your binding bid by 10:00 am on 13 May 2026. Once the auction has ended, you will be informed of the outcome within 72 hours.

Condition: ready for operation (used), Year of construction: 2012, Table height: 850mm, probing error MPEp: 3.5μm, length measurement error MPEe: 3.0+L/250μm, machine height: 1845mm, electrical connection: four grounded Schuko sockets 220V with 16A protection, power consumption: max. 700VA, spatial temperature gradient: max. 1°C/m, regularly inspected, with computer. An on-site inspection is possible. Bsdpfxjy H I Eno Akxslg

Condition: excellent (used), Year of construction: 1990, Coordinate Measuring Machine MC 850 08/12/06 UHING Year of manufacture: 08/1990 Control: C98 Data system: Unix Workstation B2000 Dongle available: no Software: UMESS Unix 8.21 Blodpsy Hrbyofx Akxog

Condition: ready for operation (used), Design: gantry design, measuring range X/Y/Z: 850mm/1200mm/600mm, measuring accuracy: 2.5µm/L250, repeatability: +/-3µm, machine weight: approx. 3500kg. Documentation available. An on-site inspection is possible. Blodpfjy Hk Ufsx Akxsg

Condition: ready for operation (used), Year of construction: 2020, An optical CNC 3D coordinate measuring machine Keyence is available. Display resolution: 0.1µm, repeatability: 2µm, measurement accuracy: +/-10µm, low magnification: 300mm/200mm, high magnification: 70mm/50mm, max. load capacity: 20kg, weight: approx. 30kg. Documentation available. An on-site inspection is possible. Blodpfoy Hk Tbox Akxog

Condition: like new (used), Year of construction: 2014, functionality: fully functional, measuring range X-axis: 1,000 mm, measuring range Y-axis: 2,000 mm, measuring range Z-axis: 800 mm, Aberlink Coordinate Measuring Machine Zenith II Measuring ranges: 1000 x 2000 x 800 mm Measurement uncertainty: 3.8 +4L/1000 Renishaw PH10M probe with TP200 and SCR200 changer Optional camera unit, manually changeable (+ €3,500) Aberlink 3D measurement software, latest version, Win 10 PC Optionally available with CMM Manager software Bljdpfx Akjy Hcb Rsxog Installation and training available on request

Condition: used, Year of construction: 2020, functionality: fully functional, measuring range X-axis: 3,000 mm, measuring range Y-axis: 3,000 mm, total height: 400 mm, total width: 800 mm, total length: 800 mm, overall weight: 50 kg, input voltage: 220 V, Equipment: documentation/manual, type plate available, Mobile coordinate measuring system KEYENCE WM-3000 (Wide Area Coordinate Measuring Machine). The system was delivered in November 2020 and is in well-maintained, fully functional condition. This is a complete measuring system including accessories, software, and transport cases. Scope of delivery • WM-3000 measuring head • WM-P3000 probe • WM-C3000 control/camera module • WM-S1 camera tripod • 3x WM-B1 batteries • WM-BC1 charger • OP-99032 power cable • Laptop with installed WM measuring software • Transport cases • Calibration certificate (09/2020) Bodpjy E Rv Hofx Akxslg • Inspection report (Inspection Result) Condition • Fully functional • Visually well-maintained • Calibration from 09/2020 (factory recalibration recommended) • Sold from ongoing operations The WM-3000 is an optically guided 3D coordinate measuring system for large-volume measurement of components in the range of 300 mm to 3,000 mm. Measurement is performed using an active probe with camera tracking. Suitable for manufacturing, toolmaking, plant engineering, and quality assurance.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, measuring range X-axis: 1,000 mm, measuring range Y-axis: 3,000 mm, measuring range Z-axis: 800 mm, Measuring Range X Axis: 1,000 mm Y Axis: 3,000 mm Bjdpfx Aoy Ewgxskxolg Z Axis: 800 mm Granite Guides Air-bearing Axes Measuring Accuracy Linear measurement deviation approx. 1.3 µm plus L/400 depending on configuration and calibration status Probing Systems Renishaw probe heads possible Touch trigger and scanning PH10, TP20, SP25, SP80 depending on equipment Workpiece Weight Permissible table load up to approx. 2,000 kg depending on configuration Control CNC control with handheld operating unit Software Metrosoft CM version 3.112 WENZEL Quartis R16 Electrical Supply 230 V 50/60 Hz Power consumption approx. 1 kVA Pneumatic Supply Compressed air 6 to 10 bar filtered and dry

Condition: excellent (used), The probe was used on a Zeiss Prismo Ultra as a replacement probe with few operating hours. Blsdpsy Epm Ijfx Akxsg

Condition: ready for operation (used), functionality: fully functional, repeat accuracy: 0.002 mm, table load: 50 kg, rotary table diameter: 500 mm, The offer consists of the following components: VL-770 Probe Head – High-resolution optical 3D scanner VL-700 Control Unit – Control and evaluation unit, including software interface VL-C35 Cover – Light protection hood VL-A3D Software Package – Measurement and evaluation software (German) OP-88145 Calibration Plate – Reference plate VL-H3G Module – Geometric dimensioning and tolerancing (GD&T) module VL-H3R Module – CAD conversion module VL-B1 Accessory – Calibration ball gauge OP-99031 Cable – AC power cable Bsdey Eglqepfx Akxelg TECHNICAL DETAILS Repeatability (σ): 2 µm Measurement accuracy: ±10 µm Measurement resolution: 9 million measurement points Measuring range Low magnification: Ø300 × H200 mm High magnification: Ø70 × H50 mm Work Table Rotary table: 500 mm Rotation mechanism: 360° XY movement of object stage: Ø200 mm Tilting mechanism: up to 45° Maximum load capacity: 50 kg MACHINE DETAILS Weight Weight of control unit: 3.7 kg Weight of object table: 26 kg Weight of cover: 5.5 kg Weight of measuring unit: 19.6 kg EQUIPMENT Original software and manuals Calibration plate Protective hood Monitor, PC, keyboard, and accessories

Condition: ready for operation (used), Year of construction: 2005, X-axis: 505mm, y-axis: 405mm, z-axis: 405mm, number of M8 threaded holes: 9, max. workpiece height: 545mm, max. table load: 180kg, accuracy: ISO 10360-2, resolution: 0.1µm, guide system: air bearings on all axes, traverse speed CNC mode: 8-300mm/s (max. 520mm/s), joystick rapid traverse: max. 80mm/s, slow: 0.05mm/s, measuring speed: 1-8mm/s (CNC), acceleration: 0.13g (max. 0.23g), measuring table material: granite, table dimensions: 638x860mm, compressed air consumption: approx. 50l/min at 0.4MPa, length: 1122mm, width: 1082mm, height: 2185mm, weight (incl. table and control): 515kg. An on-site inspection is possible. Bsdpfey Duq Eex Akxjlg

Condition: used, Year of construction: 2003, Coordinate Measuring Machine Wenzel LH 54 (Year of Manufacture 2003) in well-maintained and fully functional condition. The machine is built on a stable granite structure combined with air-bearing guides. This allows the portal and axes to move almost frictionlessly and smoothly over the granite—a proven foundation for high measurement accuracy and repeatability. The LH 54 is designed for reliable use in quality assurance as well as in series production and delivers consistent measurement results even during continuous operation. Before delivery, the machine is inspected and test-run by our service technicians in Remscheid, ensuring full functionality. The system is currently powered on and can be viewed and demonstrated at any time. PC System (modernized): After purchase, a completely new PC system will be installed, meeting WENZEL’s current requirements. This system is fully up to date and thoroughly tested before the machine is finally handed over to the buyer. Optional Services (upon agreement): - Installation and commissioning of the measuring machine within NRW - Issuance of a factory calibration certificate - Determination of length measurement uncertainty - Determination of probing uncertainty - Determination of repeatability range - Execution in accordance with DIN EN ISO 10360-2:2010-06 - Maximum measuring volume diagonal: 4,660 mm - Determination of probing uncertainty according to DIN EN ISO 10360-5:2020-11 - Including full documentation - DAkkS calibration by the accredited Klostermann calibration laboratory - Accreditation number: D-K-17518-01-00 - Accredited according to DIN EN ISO/IEC 17025:2018 - Training for the WM | Quartis measuring software - Custom programming for your components Additional Information: On request, the machine can be retrofitted with the proven Renishaw SP25M probe. The retrofit includes additional service work and complementary hardware components, which will adjust the purchase price accordingly. Bljdpfx Akoy Dcivoxjg Additional software modules, custom adaptations, as well as individual accessories and clamping systems are available on request—optimally tailored to your specific measurement requirements. Measuring range X: 500 mm Measuring range Y: 1.000 mm Measuring range Z: 400 mm Measurement uncertainty: Eo = 2,5 + L/300 [μm] Installed software: WM | Quartis R2026-1 Controller: WPC2040 Basic PC System: Windows 11 (current configuration) Probing system: TP20 Probe head: PH10T Probe module: 1 × TP20 Standard Force Module head interface: PHC10-3 PLUS Probe interface: PI200 (Combi) Joystick: HT400 Exchange bridge: MCR20 (empty) Accessories: Stylus kit M2 | Mouse & keyboard | 2 × 24" TFT monitors | Printer Included services: Final inspection upon purchase | Disassembly and transport preparation | Packing | Loading onto customer-provided truck Included transport frame: On loan

Condition: like new (used), Year of construction: 2022, operating hours: 1 h, functionality: fully functional, measuring range X-axis: 100 mm, measuring range Z-axis: 500 mm, warranty duration: 19 months, total height: 1,170 mm, type of input current: AC, total width: 600 mm, total length: 850 mm, travel distance X-axis: 100 mm, travel distance Z-axis: 500 mm, overall weight: 250 kg, input voltage: 230 V, table width: 450 mm, table height: 110 mm, table length: 600 mm, feed length X-axis: 100 mm, feed length Z-axis: 500 mm, Equipment: documentation/manual, type plate available, We are offering this nearly new Mitutoyo Avant FTA - H4 D4000-D contour/roughness measuring instrument, year of manufacture (2022). According to the nameplate, the machine was built in 2022 but was only delivered to us and put into operation for the first time in November 2025. It has been used once since then and is therefore like new. All original accessories are included, as well as the transport cases for both measuring arms. The software key is also provided. Bsdpfx Aoy Dcfkjkxjlg If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2008, functionality: not functional, Faro Gage Plus measuring arm with 6 axes Arm length: 4 ft (approx. 1.2 m) Accuracy: 5+8L/1000µm Bljdpfx Asy A Tgpjkxsg Includes measuring table, accessories, and corresponding transport case User manual and manuals included No software included!!!

Condition: excellent (used), Year of construction: 2023, Mobile 3D coordinate measuring device Camera, manual probe with display Bodpfx Akjy Aypksxelg Max. measuring length 10000/3500/3500 mm Certified measuring range 3000/1500/1500 mm Triple camera Integrated probe camera Measuring accuracy ±(28 + 5 L/1000) μm* Repeatability ±10 μm* Accessories

Condition: good (used), total height: 1,360 mm, total width: 1,100 mm, total length: 1,000 mm, -KOM 3179- Offered here is a measuring and inspection plate made of hard stone. Dimensions: approx. 1100 mm x 1000 mm x 1360 mm. Table height: approx. 900 mm. Bledsy Auvlspfx Akxeg

Condition: refurbished (used), Year of construction: 1999, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 2,415 mm, measuring range Z-axis: 1,000 mm, The machine was around 6 years complete overhauled and its control technology was brought to the newest status. Technical details: Blsdsy Amfrepfx Akxjg Distance between portal columns: 1440mm X-travel (cross): 1200mm Y-travel (longitudinal): 2415mm Z-travel (vertical): 1000mm Feeler head: Vast Gold Regularly maintenanced through company Zeiss With housing

Condition: used, used, robust marking-out and spotting plate Table surface: 750 x 1000 mm Working height: 800 mm Bodpfx Aey Ahwpokxslg

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 201502530269, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 600 mm, table load: 560 kg, Equipment: documentation/manual, type plate available, ZEISS CONTURA G2 7/7/6 – VAST XXT TL1 Year of Manufacture: 2015 | Commissioned: 2016 | Immaculate Condition | Extremely Low Operating Hours We are offering for sale a ZEISS Contura G2 coordinate measuring machine (CMM) with a measuring range of 700 × 700 × 600 mm, equipped with a VAST XXT TL1 scanning probe head. The device comes from a controlled laboratory environment and was used exclusively on-demand, single-shift operation, never on a production line – resulting in exceptionally low actual usage and outstanding technical condition. 🔹 Basic Information Manufacturer: ZEISS Model: Contura G2 Measuring Range (X/Y/Z): 700 / 700 / 600 mm Year of Manufacture: 2015 Commissioned: 2016 Technical and Visual Condition: Perfect Measurement Error MPE (E0) = 1.7+L / 350 μm 🔹 Configuration and Accessories ✅ ZEISS VAST XXT TL1 active scanning probe head Bledpeyzmbdsfx Akxog ✅ Stylus rack / magazine ✅ Set of measuring styli (mainly diameters ⌀ 0.6 mm and ⌀ 1.5 mm) ✅ Reference sphere ✅ BP26_SE control console 🔹 Usage History Device used exclusively in laboratory conditions Occasional, project-based (on-demand) use Single-shift operation, no serial or production work As a result, the machine exhibits extremely minimal mechanical wear 🔹 Service and Calibration ✅ Service and calibration exclusively by official ZEISS technicians ✅ Regular maintenance according to manufacturer guidelines ✅ No third-party interventions ✅ Device fully operational 🔹 Status 📍 Machine available immediately 🔍 Viewing possible 📄 Full documentation included ✅ Buyer arranges transport

Condition: not inspected (used), Year of construction: 1997, Attention: Sale on behalf of the seller ● Serial number: CMM970103039 ● Availability: By arrangement ● Payment terms: Advance payment – by bank transfer ● Internal no.: S3 Technical data: ● Measuring range X/Y/Z: 500/550/515 mm Scope of delivery: ● Available manuals ● Available measuring accessories as shown in the pictures Dimensions & weight: ● Installation dimensions L x W x H approx.: 1500 x 1500 x 2400 mm ● Weight approx.: 1000 kg Additional notes: Bledpfxeyyx Tpj Akxog ► On request, we can offer transport to the place of destination ► The offer price is net, plus VAT ► Goods are sold with exclusion of any warranty ► Technical data subject to change without notice ► Subject to prior sale ❗ Sale exclusively to businesses ❗

Condition: used, Year of construction: 2008, Coordinate Measuring Machine Wenzel XO 55 (Year of Manufacture 2008) in well-maintained and fully functional condition. The machine is based on a stable granite structure combined with air-bearing guides. This allows the portal and axes to move almost frictionlessly and smoothly over the granite—a proven foundation for high measurement accuracy and repeatability. The XO 55 is designed for reliable use in quality assurance as well as in series production and delivers consistent measurement results even during continuous operation. Before delivery, the machine is inspected and test-run by our service technicians in Remscheid, ensuring full functionality. Bedpoyyulnjfx Akxolg The system is currently powered on and can be viewed and demonstrated at any time. PC System (modernized): After purchase, a completely new PC system will be installed, meeting WENZEL’s current requirements. This system is fully up to date and thoroughly tested before the machine is finally handed over to the buyer. Optional Services (upon agreement): - Installation and commissioning of the measuring machine within NRW - Issuance of a factory calibration certificate - Determination of length measurement uncertainty - Determination of probing uncertainty - Determination of repeatability range - Execution in accordance with DIN EN ISO 10360-2:2010-06 - Maximum measuring volume diagonal: 4,660 mm - Determination of probing uncertainty according to DIN EN ISO 10360-5:2020-11 - Including full documentation - DAkkS calibration by the accredited Klostermann calibration laboratory - Accreditation number: D-K-17518-01-00 - Accredited according to DIN EN ISO/IEC 17025:2018 - Training for the WM | Quartis measuring software - Custom programming for your components Additional Information: On request, the machine can be retrofitted with the proven Renishaw SP25M probe. The retrofit includes additional service work and complementary hardware components, which will adjust the purchase price accordingly. Additional software modules, custom adaptations, as well as individual accessories and clamping systems are available on request—optimally tailored to your specific measurement requirements. Special features: Core drilling for installation with rotary-tilt frame Included transport frame: On loan Included services: Final inspection upon purchase | Disassembly and transport preparation | Packing | Loading onto customer-provided truck Accessories: Stylus kit M2 | Mouse & keyboard | 2 × 24" TFT monitors | Printer Exchange bridge: SCR200 (empty) Joystick: HT400 Probe interface: PI200 head interface: PHC10-2 Probe module: 1 × TP200 Standard Force Module Probe head: PH10T Probing system: TP200 PC System: Windows 11 (current configuration) Controller: WPC2030 Installed software: WM | Quartis R2026-1 Measuring range Z: 500 mm Measuring range Y: 1.000 mm Measuring range X: 500 mm