Svarog Dooel

Condition: excellent (used), Year of construction: 2002, turning length: 300 mm, turning diameter: 260 mm, spindle bore: 65 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 300 mm, overall weight: 7,000 kg, Technical data: CNC Lathe – Mori Seiki ZL-203 SMC Year of manufacture: 2002 Control: Mori Seiki MSG-501 (Fanuc-based) Working area: Max. turning diameter: approx. 260 mm Max. turning length: approx. 300 mm Bar capacity: approx. 65 mm Main spindle: Speed: up to approx. 4,000 – 5,000 rpm Spindle bore: approx. 65 mm Sub spindle: Speed: up to approx. 4,000 – 5,000 rpm Complete machining possible Turret: 2 turrets (upper & lower) Tool stations: 10–12 positions each Driven tools possible Travel: X-axis: approx. 160–200 mm Z-axis: approx. 300 mm Drive: Spindle motor power: approx. 11–15 kW Equipment: Chip conveyor Bar feeder Coolant system Main/sub spindle part transfer Complete machining in a single setup Weight: Machine weight: approx. 6,000 – 7,500 kg Condition: Csdpfsy Nkc Ijx Anwsrb Used, functional

Condition: used, Hardinge HLV-H High Speed Super Precision Tool Room Lathe Cedpfey Nfqmjx Anworb Max’ Distance Between Centres 18” Max’ Swing over Bed 11” Max’ Swing Over Carriage 9” Max’ Swing over Cross Slide 6” Spindle Capacity: Though Spindle - 1 1/4” 5C Round Collets - 1 1/16” 5C Hex Collets - 7/8 5C Square Collets - 3/4” With Step Chucks – 1 1/16” to 6” With Jaw Chuck (Through Spindle) - 1 5/32” With Expanding Collets 3” Variable Spindle Speeds - 125 to 3000 rev/min Tailstock M/T 2 3 Phase Electrics Net Weight (approx.) 750Kgs Supplied with: 2 Axis Digital Readout 4 Jaw Chuck Faceplate 3 off Multifix Tool Holders Set of Misc’ 5C Collets For Sale Jet Machinery Ltd Jet Machinery Stock No: #79017 Machine Serial Number: HLV-H14793T Cost: £8,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 1998, functionality: fully functional, turning diameter over cross slide: 250 mm, turning length: 500 mm, turning diameter: 250 mm, spindle bore: 71 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 215 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, total height: 1,800 mm, total length: 4,000 mm, total width: 1,900 mm, overall weight: 5,000 kg, CNC Fanuc 18i - T CAPACITY: Max bar working diameter: mm 54 Max turning diameter (re-chucking): mm 250 Max turning length: mm 500 Max swing diameter: mm 520 MAIN SPINDLE: Speed range: rpm 40 – 4,000 Spindle nose: ASA 6’’ Spindle bore: mm 80 Chuck diameter: mm 250 Motor power: kW 11/15 (50%) SUB-SPINDLE: Speed range: rpm 40 – 4,000 Spindle nose: ASA 5’’ Spindle bore: mm 52 Chuck diameter: mm 165 Motor power: kW 5.5/7.5 (50%) BI-DIRECTIONAL TURRET: Number of stations: 12 Indexing time: sec 0.6 LIVE TOOLS: Number of stations: 6 Speed range: rpm 50 – 3,000 Motor power: kW 3.7 (50%) C AXIS: Type: CS (direct) Minimum programmable increment: 0.001° Max rapid speed: rpm 80 AXES: X axis travel: mm 210 + 5 Z axis travel: mm 500 + 10 B axis travel: mm 510 + 5 Rapid traverse X: m/min 20 Codpfxey I A Imj Anwsrb Rapid traverse Z: m/min 20 Rapid traverse B: m/min 24 COOLANT: Tank capacity: L 200 Pump flow rate: L/min 100 DIMENSIONS: Overall dimensions with chip conveyor: mm 4,000x1,900x1,800 h Weight with chip conveyor: kg 5,000 Machine equipped with: • Drilling kit with B-axis sub-spindle operating simultaneously with turning • 9 bar pump • Part catcher L 150 mm • Monitoring system • Spindle bore mm 71 • Collet holder, simple cone 42 • Chuck diameter mm 165 • Instruction manuals and CE declaration

Condition: good (used), Year of construction: 2011, functionality: fully functional, turning length: 225 mm, turning diameter: 260 mm, travel distance X-axis: 170 mm, travel distance Z-axis: 335 mm, rapid traverse X-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, rotational speed (max.): 5,000 rpm, quill diameter: 60 mm, quill stroke: 80 mm, ATTENTION: A total of 3 machines available. There are 2 additional identical machines with the same equipment (chip conveyor, etc.). EQUIPMENT - Chip conveyor for side mounting and chip bin - Short bar loader magazine - Interface for bar feeder device - Workpiece catch tray (parts catcher) - Chuck confirmation switch (open/close) - C-axis indexing - Driven tools - Programmable tailstock - Linear guides - Manuals Control: Fanuc 0i-TD Control power-on hours: 30,811 h Machining time: 7,738 h Spindle motor power: 15/7.5 kW Feed motor power X/Z-axis: 3.0/1.8 kW Milling spindle motor power: 3.7/2.2 kW Crjdpfsy Hrngex Anweb Max. turning diameter: 260 mm Max. turning length: 225 mm Chuck size: 6" Swing diameter over bed: 550 mm X-axis travel: 170 mm Z-axis travel: 335 mm Rapid traverse X/Z-axis: 36 m/min Main spindle Spindle nose (ASA): A2-5 Max. spindle speed: 6,000 rpm Spindle bore diameter: 56 mm Max. bar capacity diameter: 45 mm Turret Number of turret stations: 12 positions Turret indexing time: 0.15 s Tailstock Quill diameter: 60 mm Quill stroke: 80 mm Taper bore/tailstock mounting: MT 4 Milling Spindle Max. spindle speed: 5,000 rpm Bar feeder magazine Model: Fedek Machine Co. DH-65 Bar length min./max.: 280/1,200 mm Bar diameter: 5-65 mm Dimensions Dimensions (L x W x H): approx. 1,620 × 1,200 x 1,400 mm

Condition: used, With tailstock Documentation Powered on Csdpfx Anoy Hqzxoworb With error message (see the picture)

Condition: used, Year of construction: 2023, MAZAK - QT250MSY - 2023 MAZAK QUICK TURN 250 MSY - 603 working hours only Cedpfx Asy Hf Erenwerb Capacity: Maximum swing Φ695 mm Standard finish diameter Φ276 mm Distance between chuck jaws of both spindles 540 mm Maximum load capacity: Working with chuck 400 kg Bar working capacity (main spindle / sub spindle) Φ80 mm Spindle: Chuck size 10" Maximum spindle speed 4000 min-1 Spindle motor (40% ED) 26 kW Spindle motor (continued) 22 kW Sub spindle: Chuck size 6" Maximum spindle speed 6000 min-1 Spindle motor (25% ED) 11 kW Spindle motor (continued) 7.5 kW Turret: Turret type 12-position drum turret head (VDI) Tool storage capacity 12 Tool shank height 25 mm Drilling bar shank diameter Φ40 mm Rotary tool spindle: Maximum spindle speed 5000 min-1 Milling capability (drill / mill / tapping) Φ20 mm / Φ20 mm / M20 × 2.5 Spindle motor (40% ED) 5.5 kW Spindle motor (continued) 3.7 kW Travel: X axis 234 mm Y axis 100 mm Z axis 625 mm W axis (sub spindle) 585 mm Rapid traverse speed: X axis 30000 mm/min Y axis 21,000 mm/min Z axis 33,000 mm/min C axis 555 min-1 W axis (sub spindle) 30000 mm Machine size: Width × Length (MAZATROL SmoothG) 1845 mm × 2760 mm Height 1857 mm Machine weight 5950 kg - set of accessories according to the quotation - multiple sets of jaws and workholding fixtures

Condition: excellent (used), Year of construction: 2013, Swing 806mm, Swing over cross slide 527mm, maximum cutting diameter 305mm, 533mm maximum cutting length, 50mm Bar capacity, 8” chuck, Credey Ex T Tspfx Anwob 20Hp Spindle Motor, C axis 0.01 degrees, Y axis +/- 51mm, 4000rpm spindle speed, 6,000rpm milling speed, 12 Station turret, parts catcher, tailstock, tool setter, coolant

Condition: good (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 1372, turning length: 350 mm, travel distance X-axis: 150 mm, travel distance Z-axis: 250 mm, total height: 2,300 mm, total length: 4,000 mm, total width: 2,000 mm, overall weight: 3,000 kg, controller manufacturer: MORI SEIKI, controller model: MSC-518, number of slots in tool magazine: 8, MORI SEIKI CL-20 B CNC Lathe - Operating voltage: 400 V Frequency: 50 Hz Rated current: 55 A The machine is equipped with an 8-position tool turret and a three-jaw chuck, diameter: 250 mm. Note: The item must be collected, bindingly, between July 7th and 9th, 2026, on a specific date to be agreed upon. FCA D-71263 Weil der Stadt – loaded onto truck Crjdey Dcnlepfx Anwjb

Condition: excellent (used), Year of construction: 2013, Control Siemens Sinumerik 840D Max. turning diameter: 280 mm Max. bar capacity main spindle: 61 mm Turning length: 490 mm Spindle speed main/sub spindle: 4700 / 6000 rpm 12-position turret with driven tools C-axis Y-axis Parts catcher Workpiece ejector Chip conveyor Various tool holders Crjdpfsy Aympox Anwob

Condition: good (used), Year of construction: 2006, Parts shown by hand not come with machine. Cedpfxsyzyhqs Anwerb

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, Siemens control, turret, tailstock, chip conveyor, without loading magazine. Csdjyzb I Sspfx Anwsrb

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, turning diameter over cross slide: 290 mm, turning length: 330 mm, turning diameter: 229 mm, spindle bore: 47 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 138 mm, controller model: Fanuc GE 18i-T, Hardinge Conquest T42 CNC turning center (2000) Controller: GE Fanuc Series 18-T, live tooling, C-axis option noted, tailstock included, 12-station turret, Spindle bore 47.6 mm, spindle speed 5,000 rpm, Max turning/machining diameter 229 mm, Crodpfxjyzbivj Anwsb Max turning length 333 mm, X travel 138 mm, Z travel 350 mm.

Condition: excellent (used), Year of construction: 2011, CNC Lathe with y-axis MAZAK - QTN 250 MY MACH-ID 9483 Credpfx Asyyxzmsnwjb Make: MAZAK Type: QTN 250 MY Control: Mazatrol Matrix Nexus Year: 2011 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, turning diameter over cross slide: 290 mm, turning length: 305 mm, turning diameter: 320 mm, spindle bore: 51 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 45 rpm, travel distance X-axis: 175 mm, travel distance Z-axis: 330 mm, spindle motor power: 1,500 W, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,650 mm, total length: 2,500 mm, total width: 1,600 mm, feed length Z-axis: 330 mm, swing diameter over cross slide: 290 mm, turning diameter over bed slide: 510 mm, overall weight: 3,000 kg, bar passage: 51 mm, chuck outer diameter: 210 mm, spindle nose: A2-6, bar diameter (max.): 51 mm, CNC Lathe – Doosan Lynx 220B | Ready for Production | Immediate Availability For sale: Doosan Lynx 220B CNC turning center in good working condition, available immediately. This is a compact and highly reliable CNC lathe, ideal for precision turning, small to medium batch production, and general machining applications. Known for its stability and efficiency, the Lynx 220B is a solid choice for workshops looking for a dependable production machine. Key Specifications: * Turning diameter: 320 mm * Turning length: 305 mm * Swing over bed: 510 mm * Swing over cross slide: 290 mm * Spindle bore: 51 mm * Spindle speed: up to 6000 rpm * Spindle motor power: 15 kW * X-axis travel: 175 mm * Z-axis travel: 330 mm * Turret: 12 stations * Chuck size: 210 mm (8") * Spindle nose: A2-6 Machine Condition & Details: Cjdpfx Aeyxtiijnwsrb * Machine is operational and ready for production * Well-suited for daily workshop use * Inspection under power possible * Immediate delivery available * Location: Netherlands Reason for sale: Change of business focus Price: €23,500 (negotiable) Serious inquiries only. For more information, additional pictures, or to arrange a viewing:

Condition: used, Year of construction: 2011, turning diameter 320 mm turning length 600 mm control Fanuc Oi-TD spindle bore diameter 74 mm number of controlled axis 2 Cedpfjyxr Htjx Anwerb turning speed range 3000 U/min rapid speed 20 m/min number of tapers in turret head 12 direkt tail stock Ja power requirement 15 kW weight 5,0 t dimensions 3,7 x 1,6 x 2,0 m Used CNC- Lahte 2 axis - 3 jaw chuck Ø 250 mm - chip conveyor - oil dust collector - Tool presetter

Condition: used, Year of construction: 2001, turning diameter 280 mm turning length 400 mm control Fanuc 18 T spindle bore diameter 51 mm number of controlled axis 2 turning speed range 0 - 4000 U/min rapid speed 30 m/min number of tapers in turret head 12 VDI 40 tail stock Ja dimensions 3,9 x 1,6 x 2,1 m Cedpfx Asyxr Hgjnwsrb weight 4,0 t weight of the machine ca. 3,9 t power requirement 15 kW Used CNC- Lahte with box way, 2 axis - 3 jaw chuck Ø 200 mm - chip conveyor - oil dust collector

Condition: good (used), Year of construction: 2006, functionality: fully functional, The machine is in good technical condition, testing can be arranged by prior agreement. Credeyxgb Ejpfx Anweb

Condition: used, Year of construction: 2008, 2-axis CNC lathe MAZAK QTN 100II Mazatrol Matrix Kitagawa BB206 chuck Spindle bore 51mm Turning length 310mm Cjdpfxeyvzwvs Anworb Turning diameter 280mm X-190mm Z-330mm Max spindle speed 6000 rpm 12-position turret Tool probe Tailstock Included with the machine: -coolant tank with pump -documentation

Condition: excellent (used), Travels: X-axis: 155 mm Z-axis: 320 mm Swing diameter over bed: 450 mm Crjdeyvy Utepfx Anwjb Swing diameter over carriage (slide): 350 mm Maximum turning diameter: 270 mm Maximum turning length: 500 mm Spindle speed, infinitely variable: 75 – 3500 rpm Spindle motor: 7.5 kW Tool turret: 12 stations Dimensions (L x H x W): 2200 x 1635 x 1670 mm Weight: 3800 kg

Condition: excellent (used), Year of construction: 2022, As-new condition; has not yet been used in production Control: CNC path control SIEMENS SINUMERIK 828 D TECHNICAL DATA Main spindle Turning diameter 288 mm Turning length 243 mm Chuck diameter 210 mm Bar capacity 67 mm Max. drive power 10.5/20.0 kW Max. torque 214 Nm C-axis (resolution) 0.001° Speed range up to 4,500 rpm Turret (tool carrier) Credpfeyrd Uhex Anwjb Number of stations 12 of which driven 12 Speed of driven tools 5,000 rpm Tool interface BMT 45 X-axis 175 mm Z-axis 350 mm Tailstock Quill diameter 65 mm Quill stroke 80 mm EQUIPMENT/ACCESSORIES • Hollow clamping cylinder, main spindle • C-axis, main spindle • Tailstock • Driven tool system, turret • Coolant system • Chip conveyor • Rinsing gun • Parts catcher • Three-jaw chuck, dia. 206 mm • Documentation

Condition: used, Year of construction: 2001, turning diameter 290 mm turning length 850 mm swing diameter 600 mm control Siemens type 840 D mm spindle passage 103 mm turning speeds 3000 U/min live tooling 3000 U/min rapid travel - grinding spindle 25 m/min total power requirement 65 kW weight of the machine ca. 11 t Serial No. 1130.2011-30 Equipment: Main spindle / counter spindle 2 power chucks 2 tool turrets C-axis Cabin Chip conveyor Coolant system 22 bar Offer price without tools Credpfx Aoyqv Auenweb Optional accessories available for purchase: 106 tool holders for internal and external machining, 20 driven tools (including 10 angle tools) The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2003, Siemens 840D control system Turning diameter 254 mm Turning length 500 mm Chuck diameter 210 mm Turning length 410 mm Spindle speed 4,500 rpm 8-position turret Cjdpsyp Idujfx Anwjrb Chip conveyor

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, turning length: 555 mm, travel distance X-axis: 195 mm, travel distance Y-axis: 82 mm, travel distance Z-axis: 600 mm, workpiece diameter (max.): 250 mm, TECHNICAL DETAILS Counter-spindle speed: 59–4,500 rpm Bar capacity main spindle: 65 mm Bar capacity counter-spindle: 51 mm Travel X1/X2 axis: 195 mm Travel Y axis: ± 41 mm Cedpoynhihsfx Anwjrb Travel Z axis: 600 mm Max. workpiece diameter: 250 mm Max. turning length: 555 mm Number of tool stations upper turret: 12 Number of tool stations lower turret: 12 All tools driven Main spindle nose: A 2-6 Counter-spindle nose: A 2-5 Feed power X1/X2/Y axis: 1 kW Feed power Z1/Z2 axis: 2.1 kW Maximum loading length: 6,200 mm MACHINE DETAILS Control model: Fanuc 18 IT Main spindle power: 18.5 kW / 15 kW Counter-spindle power: 11 kW / 7.5 kW Bar feeder Max. bar length: 6 m 8 channels with diameters: 22 mm, 27 mm, 32 mm, 37 mm, 42 mm, 47 mm, 57 mm, 67 mm 8 pushers with pusher cone Intermediate sizes can also be loaded Unload magazine Max. bar length: 2 m EQUIPMENT Coolant tank Chip conveyor from 10/2021 Last overhaul of bar feeder 09/2020 (channel replacement, replacement of various bearings, replacement of push rods and spindle liners, including maintenance)

Condition: ready for operation (used), operating hours: 7,738 h, functionality: fully functional, turning length: 225 mm, turning diameter: 260 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 170 mm, travel distance Z-axis: 335 mm, TECHNICAL DETAILS Max. turning diameter: 260 mm Max. turning length: 225 mm Chuck size: 6" Swing diameter over bed: 550 mm Travel X-axis: 170 mm Travel Z-axis: 335 mm Rapid traverse X/Z-axis: 36 m/min Main Spindle Spindle nose (ASA): A2-5 Max. spindle speed: 6,000 rpm Spindle bore diameter: 56 mm Max. bar capacity: 45 mm Turret Number of turret stations: 12 positions Turret indexing time: 0.15 s Tailstock Quill diameter: 60 mm Quill stroke: 80 mm Taper/Quill mount: MT 4 Live Tooling Spindle Max. spindle speed: 5,000 rpm Bar Feeder Model: Fedek Machine Co. DH-65 Bar length min./max.: 280/1,200 mm Bar diameter: 5-65 mm MACHINE DETAILS CNC control model: Fanuc 0i-TD Control on-time: 30,811 h Cutting time: 7,738 h Spindle motor power: 15/7.5 kW Feed motor power X/Z-axis: 3.0/1.8 kW Live tooling spindle motor power: 3.7/2.2 kW Dimensions Dimensions (L x W x H): approx. 1,620 × 1,200 x 1,400 mm EQUIPMENT Side-mounted chip conveyor and chip cart Cedpfx Asyngptsnwsrb Short bar loader magazine Interface for bar feeder Workpiece catcher (parts catcher) Chuck open/close confirmation switch C-axis indexing Driven tools Trailing (drag-along) tailstock Linear guides Manuals

Condition: used, Year of construction: 2008, turning diameter 250 mm turning length 400 mm control Siemens 840 D swing diameter max. 300 mm workpiece length - max. 400 mm travel -x axis 280 mm feed in x - axis - 30 m/min rapid traverse X-axis 30 m/min travel -z axis 1150 mm feed range Z-direction mm/min rapid traverse Z-axis 60 m/min spindle bearing diameter 90 mm spindle head DIN 55026 - Size A6 turning speeds 1 - 5000 U/min tool turret 12 times C4 Capto total power requirement 45 kW weight of the machine ca. 11 t dimensions of the machine ca. 7,0 x 5,0 x 3,2 m CNC lathe with SIEMENS SINUMERIK 840D control; Screw conveyor with chip breaker and return pumping station; NC-steady SMW-SLU-1-OLD Ø10-70mm; 12-fold tool turret SAUTER 0.5.460.220; NC tailstock; Artis monitoring; Pickup-loading incl. conveyor. Without coolant system, was connected to central supply. Machine can be inspected under power. Crodpfeynbchex Anwob