Furnus LT MB
Furnus LT MB from Šiauliai
This dealer has not yet provided a company description.
Furnus LT MB
Zagares str. 81
76150 Šiauliai
Lithuania
Current offers from similar dealers
Success:
Your message has been sent.
Listing
Stuhr
7,657 km
Electric 4-wheel forklift
HysterJ 2.0 XN LWB
HysterJ 2.0 XN LWB
Call
Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 2,991 h, load capacity: 2,000 kg, lifting height: 3,215 mm, free lift: 1,510 mm, fuel type: electric, mast type: duplex, construction height: 2,070 mm, fork carriage width: 980 mm, fork length: 1,200 mm, empty load weight: 3,387 kg, total length: 2,250 mm, drive type: Elektro, construction width: 1,120 mm, Electric four-wheel forklift
Load center: 500
ISO class: FEM 2 A
Mast type: Duplex
Transmission: AC
Technical condition: good
Front tire type: Superelastic
Front tire size: 2 x 200/50-10
Front tire condition: 80 - 100%
Rear tire type: Superelastic
Rear tire size: 2 x 15x4.5-8
Rear tire condition: 80 - 100%
Battery voltage: 48V
Battery capacity: 750Ah
Kedpfx Aj Aldcnsdgsdw
Battery year of manufacture: 2009
Additional single hydraulic circuit, integrated side shifter, full cabin, battery, charger, lighting according to StVZO (German Road Traffic Licensing Regulations).
Success:
Your message has been sent.
Listing
Stuhr
7,657 km
Electric 4-wheel forklift
CesabB 635
CesabB 635
Call
Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 8,720 h, load capacity: 3,500 kg, lifting height: 5,000 mm, free lift: 1,750 mm, fuel type: electric, mast type: triplex, construction height: 2,400 mm, fork carriage width: 1,070 mm, empty load weight: 6,262 kg, total length: 2,500 mm, drive type: Elektro, construction width: 1,300 mm, Electric four-wheel forklift
Load center: 500
ISO class: FEM 3 A
Mast type: Triplex
Transmission: AC
Technical condition: good
Front tire type: Superelastic
Front tire size: 2 x 23x12-12
Front tire condition: 20 - 40%
Rear tire type: Superelastic
Rear tire size: 2 x 18x7-8
Rear tire condition: 20 - 40%
Battery voltage: 80V
Battery capacity: 775Ah
Battery year of manufacture: 2019
Kdedpfx Adj Aldb Uegow
Double auxiliary hydraulics, integrated side shifter, fully enclosed cabin with heater, battery, charger, 2x work lights in the front, Blue Spot.
Success:
Your message has been sent.
Listing
Püttlingen
7,782 km
Motor coach
MERCEDES-BENZTourismo RHD 17 L
MERCEDES-BENZTourismo RHD 17 L
Call
Condition: used, mileage: 445,000 km, power: 315 kW (428.28 HP), first registration: 07/2015, fuel type: diesel, number of seats: 60, gearing type: mechanical, emission class: euro6, color: green, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, onboard kitchen, parking heater, Mercedes-Benz Tourismo RHD 17 L
Very good condition, mileage is original!
* MB engine 315 kW Euro 6
* 6-speed manual transmission
* Retarder
* ESP, ABS, ASR
* ABA emergency braking assistant
* Lane keeping assist
* Attention Assist
* 57+2+1 seats
* Reclining seats with leather headrests
* Tables, nets, footrests
Kdods Aldb Hepfx Adgsw
* 2 refrigerators (near the WC)
* WC
* Kitchen with TM 40 and kettle
* Service sets with nozzle ventilation, reading lights & hostess call button
* DVD video system with 2 flat-screen monitors
* Navigation
* Radio, CD MP3, USB, microphone
* Night lighting
* Wood-look flooring
* 2 sunroofs
* Lift/lower system
* Rearview camera
* Fog lights
* Front windshield blinds
* Electrically adjustable and heated side mirrors
* On-board computer
* Bluetooth telephony
* Driver's seat with air suspension, 3 cushions, armrests
* Parallel tailgate flaps
Inspection possible at any time by prior appointment!
All information without guarantee. Errors and prior sale reserved!
For more information: also via WhatsApp
Information in Polish: WhatsApp
Your French-speaking contact: Georges Spengelin
Success:
Your message has been sent.
Listing
Stuttgart
7,944 km
Electric Pallet Trucks
JungheinrichEJE C20
JungheinrichEJE C20
Call
Condition: used, machine/vehicle number: 5340263, Year of construction: 2013, operating hours: 3,957 h, load capacity: 2,000 kg, lifting height: 540 mm, load center: 600 mm, fuel type: electric, mast type: other, fork length: 1,150 mm, overall weight: 650 kg, enginetype: Electric, manufacturer: Jungheinrich
Kdodpfxo Aldbxs Adgew
Success:
Your message has been sent.
Listing
Schierling
8,122 km
Electric - 4 wheels
LindeE30/600--EK
LindeE30/600--EK
Call
Condition: used, machine/vehicle number: --625--OK--EK, Year of construction: 2014, operating hours: 11,348 h, lifting height: 5,500 mm, free lift: 150 mm, load center: 160 mm, fuel type: electric, mast type: simplex, construction height: 3,380 mm, battery voltage: 80 V, fork length: 1,200 mm, front tire size: 5,9, rear tire size: 1,1, overall weight: 5,800 kg, Equipment: 3rd hydraulic function, cabin, enginetype: Electric, manufacturer: Linde
Serial Number: --625--E30/600 H2X387E01348
Battery Details: 26V 775 Ah 84.5V
Kdode Aldbuepfx Adgow
Success:
Your message has been sent.
Listing
Schierling
8,122 km
Tow Tugs
StillLTX-FF 10--EK
StillLTX-FF 10--EK
Call
Condition: used, machine/vehicle number: --616--OK--EK, Year of construction: 2022, operating hours: 827 h, load capacity: 1,000 kg, lifting height: 1,204 mm, free lift: 1,204 mm, fuel type: electric, mast type: mono, construction height: 1,776 mm, battery voltage: 24 V, fork length: 1,200 mm, front tire size: 1,25, rear tire size: 0,25, overall weight: 1,800 kg, Multifunktionsschlepper mit Hochhubfunktion
Kodpfx As Aldbqjdgsdw
Serial Number: --616--LTX F2108SL00023
Battery Details: 24V 4PzS 620Ah, Bj. 14.09.2022
Multifunktionsschlepper mit Hochhubfunktion
Success:
Your message has been sent.
Listing
Schierling
8,122 km
Electric - 3 wheels
LindeE18-02 + Ladegerät 3610 --EK
LindeE18-02 + Ladegerät 3610 --EK
Call
Condition: used, machine/vehicle number: --596--OK--EK, Year of construction: 2017, operating hours: 5,791 h, load capacity: 1,800 kg, lifting height: 4,625 mm, free lift: 1,519 mm, load center: 160 mm, fuel type: electric, mast type: triplex, construction height: 2,121 mm, battery voltage: 48 V, fork length: 1,200 mm, front tire size: 7,5, rear tire size: 1, overall weight: 3,500 kg, Equipment: 3rd hydraulic function, enginetype: Electric, manufacturer: Linde
Serial Number: --596--3610--E18 SYSN101980
Kjdpfx Ae Aldbmedgjdw
Battery Details: V 625 Ah 49.7 V
Success:
Your message has been sent.
Listing
Haßfurt
7,948 km
City bus
MERCEDES-BENZSprinter City 65 190 PS 100 km/h 19-Sitz LUFT
MERCEDES-BENZSprinter City 65 190 PS 100 km/h 19-Sitz LUFT
Call
Condition: used, mileage: 105,000 km, power: 140 kW (190.35 HP), first registration: 08/2024, fuel type: diesel, number of seats: 19, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, parking heater, Our internal number: 1219
Kodpfx Ado Aldbfogedw
519 City Sprinter
Registered: 08/2024 – FIRST OWNER
TELMA / Retarder
140 kW / 190 hp – EURO 6
Young city bus!!
100 km/h – Approved
Automatic transmission
15 seats that can be adjusted backwards + 3 folding seats + driver's seat = 19 seats
3-POINT SEAT BELTS on the seats!
7 standing places
Driver's seat air conditioning
LED interior lighting
Driver's seat with armrest
Passenger compartment air conditioning
Auxiliary heater
Matrix display
Interior route display
Wood-look flooring
Rear axle with air suspension!
LOWERING/RAISING/Kneeling!
Ski compartment
Various sliding windows
Rear view camera
Mechanical folding ramp
Wheelchair space
5.5 tons
Vehicle is clean! The customer is obliged to independently verify the condition and equipment of the goods/vehicle!
* etc.
* Vehicle may be in use / mileage and condition may vary
* All information is subject to change without notice
* We reserve the right to sell the vehicle in the meantime
* Please refer to our terms and conditions
Success:
Your message has been sent.
Listing
Essen
7,650 km
Low loader semitrailer
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader Hebebett
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader Hebebett
Call
Condition: new, maximum load weight: 37,075 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website.
Excerpt from the equipment:
Complete equipment available upon request.
Gooseneck
* With angled front corners approx. 45° and rear slope approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN), hardwood flooring approx. 30 mm thick
Loading platform
* Hydraulically raisable and lowerable after the gooseneck, length approx. 2,800 mm, with rear slope approx. 1,000 mm x 8°
* 6 pairs of lashing rings that fold outward (LC 5,000 daN)
* 2 pairs of lashing rings that fold outward (LC 10,000 daN)
* 1 pair of lashing rings that fold inward on the central beam at the front (LC 10,000 daN)
* Recesses in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN)
* Grated floor C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), checkered plate flooring over the axles
Two-part steel ramps
* One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with grated floor C40/4 (point load approx. 2.2 t on an area of approx. 20 x 20 cm)
Kdedpfx Aj Aldatsdgjw
* Ramp with hydraulically raisable and lowerable ramp sections. Hydraulic lifting mechanism, hydraulically adjustable.
* Maximum load per pair: approx. 40,000 kg
Kingpin
* JOST kingpin (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Axles
* BPW axles and suspension, 2 axles fixed, 1 axle steerable
* Technical axle load: 12,000 kg each
* Electro-magnetic parking brake activated via reverse gear and manually
* Air suspension with raising and lowering valve
Braking system
* WABCO braking system in accordance with EU regulations with EBS-E (2S2M)
Tires
* 235/75 R 17.5 3PMSF
* Manufacturer of our choice
* TPMS: TPMS tire pressure monitoring system according to ECE R 141
Paintwork
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to guarantee the best corrosion protection. Final coating with 2 layers of 2K topcoat, solid color in RAL 3002 carmine red according to the RAL 841GL system.
* Rims in silver-gray
Included accessories:
* 2-inch kingpin
* One galvanized steel front bulkhead, approx. 400 mm high. Grated floor in the slope of the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm). Grated floor in the slope of the loading platform C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm)
* Electro-hydraulic unit at the rear under the loading platform
* Aluminum side and rear walls on the gooseneck, plug-in type, approx. 2,440 x 400 mm (L x H)
* The rear galvanized stake pockets are removable. (Length of the superstructure approx. 2,560 mm)
* One electric winch with wireless remote control, approx. 5,400 kg lifting capacity, including approx. 9.5 mm thick wire rope, approx. 24 m long, with rope guide pulley. Screw-on approx. 5 t ring for securing the winch cable on the gooseneck without a pulley.
* One galvanized toolbox integrated in the angled gooseneck with an opening for a winch. Grated floor on the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm)
* 7 pairs of stake pockets for stake pockets approx. 100 x 50 mm in the outer frame of the loading platform
* Lift axle on the front axle with control via TEBS E depending on the current axle load and current load condition
* 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN)
* 2 pairs in the lift bed, 5 pairs in the rear pa
Success:
Your message has been sent.
Listing
Essen
7,650 km
Working platform semitrailer
ES-GE3-Achs-Ballastauflieger
ES-GE3-Achs-Ballastauflieger
Call
Condition: new, maximum load weight: 39,080 kg, overall weight: 45,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website.
Excerpt from the equipment list:
Complete equipment list available upon request.
Chassis
* Welded construction made of high-quality steel profiles with continuous profile crossmembers
* Designed for high point loads, outer frame as UNP profile, wear plate approx. 8 mm
* Underrun protection approx. 700 mm wide
Fifth Wheel Coupling
* 2-inch kingpin (also suitable for 3.5-inch)
Rear Underrun Protection
* According to EC, bolted design
Side Underrun Protection
* According to EC
Landing Gear
* 24 t landing gear with single-side operation (approx. 66 t test load)
* Jost Module CH (Heavy Duty) S-foot
Axles
* 3 x 9 t air suspension axle unit, manufacturer SAF, with disc brake approx. 430 x 45 mm, ABS
* Wheel connection center-mounted, 10-hole with offset 120
* Total stroke of the air suspension approx. 200 mm, of which lifting approx. 140 mm and lowering approx. 60 mm
* Control via rotary spool valve with detent function, with RTR function, switch for second driving height (+ approx. 50 mm)
* On the holder of the lifting and lowering system, Smartboard/TIM/Infocenter, without display, TPMS
Lift Axle
* First axle liftable, with fully automatic
* load-dependent lift control
* Starting aid via button in the cab (15-pole socket PIN12)
* Button in the cab is not included in the scope of delivery
Kdodpfx Ae Aldawjdgow
Braking System
* Two-circuit compressed air braking system according to EC with EBS and RSS
* automatic load-dependent regulation
* Spring brake cylinders as parking brake
* Interchangeable coupling heads firmly mounted on the front crossmember
* Without connection line to the tractor unit, manufacturer Wabco
Tires
* 6-fold, 385/65 R22.5 160J on rim 11.75 X 22.5 (manufacturer of our choice)
* Offset 120, basic version tire pressure control system, connected to the CAN bus system of the EBS, tire pressure display in the cab (pre-equipment by the tractor unit manufacturer)
Fenders
* According to EC, PVC fenders (half shells) over all axles, splash guards with anti-spray
Load Securing
* 8 pairs of stake pockets welded into the outer frame (tensile force approx. 3 t)
* 6 pairs of lashing rings in the outer frame on the side, evenly distributed (tensile force approx. 10 t)
* Stake pocket receptacles/stakes: 5 pairs of stake pocket receptacles embedded in the outer frame, approx. 90 x 90 x 4 mm
* 3 pairs of stake pocket receptacles embedded in the floor, approx. 90 x 90 x 4 mm
* 10 pcs. plug-in stakes made of galvanized square tube, approx. 80x80x4 mm, with stop at the bottom
Front Wall
* Front wall in bolted design, approx. 1,200 mm high, clad with sheet metal
Stake Rack
* Internal stake rack on the front wall
Floor
* Approx. 28 mm hardwood floor embedded in the outer frame, with galvanized omega steel profiles
Lighting
* According to EC, 24 Volt with multi-chamber lights
* LED side marker lights
* LED position lights, white in front
* LED outline lights in the rear
* License plate lights, 1x15-pole and 2x7-pole plug connection on the front crossmember
Equipment
* Warning sign according to ECE 70
* 2 pcs. LED work lights on the lamp carrier (switched via reverse gear)
* Holder for rotating beacon on the rear (including rotating beacon)
* 1 pc. folding and extendable access ladder on the rear (without platform)
* 2 pcs. stainless steel toolboxes, approx. 450 x 450 x 450 mm, in front of the front wall, Smart-Board with ax
Success:
Your message has been sent.
Listing
Essen
7,650 km
Low loader semitrailer
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader
Call
Condition: new, maximum load weight: 47,300 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website.
Excerpt from the equipment list.
Complete equipment list available upon request.
Gooseneck
* with beveled front corners at approximately 45° and a rear bevel of approximately 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring approximately 30 mm thick.
Loading platform
* in an extendable design with a rear bevel of approximately 1,000 mm x 8°
* 5 pairs of lashing rings that can be folded outwards (LC 5,000 daN)
* 3 pairs of lashing rings that can be folded outwards (LC 10,000 daN)
* 1 pair of lashing rings lying horizontally at the front of the loading platform (LC 10,000 daN)
* Recesses in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN)
* Hardwood flooring approximately 48 mm thick, with a diamond plate floor over the axles
Fifth wheel
* JOST fifth wheel (mechanical) with a 2-speed gearbox for approximately 24 tons lifting capacity (approximately 50 tons test load)
Tires
* 235/75 R 17.5 3PMSF, manufacturer of our choice
* TPMS: TPMS tire pressure monitoring system according to ECE R 141
* Data transmission to the tractor unit takes place via the standardized EBS interface according to ISO 11992
* For correct display, the tractor unit must be able to transmit and display this data
Axles
* BPW axles, two fixed axles, two steered axles, air-suspended, with drum brakes, with lifting/lowering function
* Steered axles with electro-magnetic reverse lock that can be activated via reverse gear or manually
* Axle spanner.
Ksdpfx Ado Aldazogsdw
Braking system
* WABCO braking system according to EU regulations with EBS-E (4S3M) without connection lines to the tractor unit
Steel construction
made of high-strength fine-grained steels
* Steel grades: S355J2+N/S355MC
* (yield strength 355 MPa)
* S690QL/S700MC (yield strength 690 MPa)
Electrical system
* according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3)
* All LED side marker lights flash with the turn signal
* ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets
* Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098
Painting
* Complete steel construction sandblasted automatically with a shot blasting system after welding
* Second blasting process with corundum for optimal adhesion of the coating system
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection
* Final coating with 2 layers of 2K topcoat, solid color in RAL 3002 carmine red, according to the RAL 841GL system
* Rear section metallized and painted in RAL 9010 (pure white).
* Metallic paint is not possible
* Paint structure tested in the salt spray test according to ISO 9227-NSS
* Sealing of cavities with special wax.
Accessories
* One spare wheel holder in front of the front wall (without spare wheel)
* 2-inch kingpin
* One galvanized steel front wall, approximately 400 mm high
* Yellow-red air couplings on the galvanized front connection bar
* 4 pieces of chocks with holder on the front wall (± 5 kg)
* Galvanized folding supports under the bevel of the loading platform
* One bracket for a rotating beacon on the rear of the semi-trailer
* Yellow reflector tape according to EU regulations on the side, on the extension and on the rear of the semi-trailer
* One bracket for warning signs on the gooseneck and the rear plate, left and right, incl
Success:
Your message has been sent.
Listing
Essen
7,650 km
Open semitrailer with tarp
KÖGELCARGO Pritschensattelanhänger
KÖGELCARGO Pritschensattelanhänger
Call
Condition: new, maximum load weight: 35,020 kg, overall weight: 42,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. The following is an excerpt from the equipment list. Complete equipment list available upon request.
10300.108: Coupling plate, approximately 8 mm thick, with a 2-inch fifth-wheel kingpin according to DIN 74080 / ISO 337.
Chassis:
I 17160.010: Axle lift mechanism on axle 1.
18330.700: Manufacturer (optional): Kögel - Three-axle unit, with disc brakes, approximately 430 mm in diameter, offset approximately 120 mm. Air suspension with approximately 180 mm of travel.
Vehicle Tires:
20540.040: Tires 6x 385/65 R 22.5, ATHOS HG 2144 (164J).
Chassis Components:
20110.010: Fifth-wheel supports (manufacturer optional: Kögel), mechanically adjustable with leveling foot, lifting capacity approximately 24 tons. Single-side operation on the right when traveling.
21070.115: Splash protection system (spray mist suppression) according to Regulation (EU) No. 109/2011, for three-axle unit with 385/65 R22.5 tires, consisting of 1 pair of quarter-circle mudguards in front of the axles, and 1 pair of quarter-circle mudguards with splash flaps behind the axles.
I 25010.025: Pallet box for 24 Euro pallets, completely enclosed, protected against spray water, and also acts as a lateral protective device.
I 25090.220: Ground clearance (front) approximately 220 mm.
I 25470.060: Storage for 8 square tube inserts, dimensions: approximately 340 x 220 x 2,150 mm. Installation behind the axle unit.
Brake / Air Suspension System:
32110.057: EBS system 2S/2M with stability program (includes ABS/ALB function), EBS plug connection ISO 7638, (without connecting lines), parking brake as spring-loaded brake, external pneumatic connections and external EBS diagnostic connection via ISO 7638 plug connection.
32125.010: EBS system (manufacturer optional: Kögel).
33420.040: Air suspension system including 1 lifting and lowering valve, mounted on the left side while traveling behind the axle unit. Driving position is automatically adjusted.
Floor:
40510.120: Plate floor, approximately 30 mm thick.
I 40513.020: Floor sealed around the edges.
I 40542.011: Pocket for square tube inserts, approximately 80 x 80 mm, arrangement according to drawing A2: 2 pairs on the longitudinal beam in the 1st and 2nd positions, 8 pairs in the outer frame.
Superstructure:
L 46502.011: Quick-release system at the front for side tarpaulin with tension bars and pivoting lever.
46503.010: Quick-release system at the rear for side tarpaulin with tension bars and ratchet.
46538.010: Meets superstructure strength requirements according to EN 12642 XL (VDI 2700). Tested for a payload of 27,000 kg.
Front Wall:
41510.125: Front wall in superstructure height with aluminum corner profiles, riveted with aluminum hollow profiles, bolted/riveted to the frame.
Rear Wall:
42400.563: Double-leaf rear portal door made of aluminum, approximately 2,630 mm wide.
42505.040: 4 integrated twist-lock fasteners (2 on the left, 2 on the right), manufacturer optional: Kögel.
I 42540.256: Bolted steel corner profiles at the rear in portal height with additional ram protection up to the first door hinge.
Side Wall:
Kdedpfxo Alda Ee Adgew
I 27140.010: Snap-in profile on the outer frame for sliding tarpaulin (required for pockets in the outer frame).
43500.300: 3 pairs of KÖGEL sliding beams with a receiving height of approximately 600 mm for 5 insert slats stacked on top of each other from the top edge of the floor. Firmly att
Success:
Your message has been sent.
Listing
Essen
7,650 km
Working platform semitrailer
ES-GE3-Achs Sattelanhänger - Bordwände + CV
ES-GE3-Achs Sattelanhänger - Bordwände + CV
Call
Condition: new, maximum load weight: 35,510 kg, overall weight: 43,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website.
Excerpt from the equipment:
Complete equipment available upon request.
Chassis:
* Welded construction made of high-quality steel profiles with continuous profile crossmembers, designed for high point loads.
* Underride guard, width approx. 700 mm, outer frame as UNP profile, friction plate approx. 8 mm, drawbar height at the front approx. 130 mm.
Coupling:
* 2-inch kingpin trailer coupling: 2 x 12 t trailer couplings with leveling foot and single-sided operation on the right-hand side (FR).
Axles:
* 3 x 9 t air suspension axle units, disc brakes 22.5, total stroke approx. 180 mm, lifting and lowering device via rotary slide valve.
Braking system:
* Two-circuit compressed air braking system according to EC regulations with EBS and RSS.
* Automatic load-dependent control.
* Spring brake cylinders as parking brake.
* Tamper-proof coupling heads mounted permanently on the front crossmember, without connection line to the towing vehicle.
Tires:
* 6 tires, 385/55 R22.5 160J on steel rim 11.75 X 22.5 ET 120.
* Manufacturer of our choice, tire pressure monitoring system (TPMS) via CAN bus system of the EBS.
Load securing:
* 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 5.0 t.
* 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.0 t.
* In the outer frame, holes every approx. 400-600 mm for attaching lashing straps.
Headboard:
* Reinforced steel construction, fixed, approx. 1,400 mm high, interior lined with approx. 9 mm screen-printed material (approx. 1,250 mm high).
Floor:
* Approx. 28 mm Z-hardwood floor recessed in the outer frame with galvanized omega steel profiles.
Lighting:
* According to EC regulations, 24 volts.
* With multi-chamber lights.
* LED side marker lights.
* LED position lights, white at the front.
* LED outline lights at the rear.
* License plate lights.
* Lane-keeping lights LED, 1x15-pin and 2x7-pin connectors on the front crossmember.
Equipment:
* 2 wheel chocks with bracket.
* Warning signs ECE 70.
* Bracket for rotating beacon, incl. rotating beacon.
* 2 rubber impact buffers at the rear.
* Foldable and extendable access ladder at the rear right (without platform).
* 1 open box made of perforated sheet metal, transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind the axles.
Paintwork:
* Headboard: RAL 5010 Enzian blue.
* Chassis: Hot-dip galvanized, outer frame hot-dip galvanized + RAL 5010 Enzian blue.
* Center members: RAL 5010 Enzian blue.
* Fifth wheel coupling: Aluminum anodized, underride guard: white (RAL 9016 traffic white).
* Components: galvanized / KTL black.
* Rims: silver.
* Contour marking: complete, yellow.
Incl. accessories:
* First axle liftable, with fully automatic, load-dependent lift control.
* 10 pairs of stake pockets in the outer frame, evenly distributed.
* 4 rows of stake pockets transverse to the loading area.
* 20 pcs. stakes made of galvanized tube 80/50, total length approx. 1,200 mm.
* Inside on the headboard, a magazine for 20 pcs. plug-in stakes.
* 5 x 25 mm side boards and rear board made of anodized aluminum hollow profiles, foldable and removable, removable Kinnegrip stakes.
* Side board and stake magazine: under the chassis, left and right, slide-in rails for side boards and stakes.
* Container locks for 1 x 40' and 2 x 20' containers, flush at the rear, c
Ksdpfx Ao Alda Nsdgedw
Success:
Your message has been sent.
Listing
Essen
7,650 km
Low loader semitrailer
FAYMONVILLEMAX Trailer MAX510 Tiefbett 2x10 t
FAYMONVILLEMAX Trailer MAX510 Tiefbett 2x10 t
Call
Condition: new, maximum load weight: 25,585 kg, overall weight: 38,000 kg, axle configuration: 2 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website.
Excerpt from the equipment:
Complete equipment available upon request.
Gooseneck
* Length approx. 3,900 mm. Gooseneck is hydraulically raisable/lowerable and retractable.
* Technical drawbar load: 23,000 kg.
Loading platform
* Low-bed with extendable center beam, length approx. 6,750 mm
* 5 pairs of lashing rings, foldable outwards (LC 5,000 daN)
* 1 pair of lashing rings, foldable outwards (LC 10,000 daN)
* 1 pair of lashing rings, lying at the rear in the loading platform (LC 10,000 daN)
Rear chassis
* Rear chassis in a short design with a closed outer frame and a diamond-plate cover.
* Chassis with excavator bucket, which is closed in the rear half to accommodate the air tanks.
* 2 pairs of lashing rings, foldable outwards (LC 5,000 daN)
* 1 pair of lashing rings, foldable outwards (LC 10,000 daN)
* 1 pair of lashing rings, lying at the rear on the chassis (LC 10,000 daN)
Axles
* BPW axles, hydro-mechanically forced steering
* Technical axle load: 12,000 kg each
Air suspension
* With raising and lowering valve
Tires
* 245/70 R 17.5 3PMSF
* Manufacturer of our choice
* TPMS: TPMS tire pressure monitoring system according to ECE R 141
Braking system
* Wabco braking system in accordance with EU regulations with EBS-E (2S2M)
Painting
Kdedpfx Ado Alda Tsgsw
* Complete steel construction, automatically blasted with a shot blasting system after welding.
* Second blasting with corundum for optimal adhesion of the coating system.
* Final painting with 2 coats of 2K topcoat, solid color in RAL 3002 carmine red, in accordance with the RAL 841GL system.
* Rims in silver gray
Includes the following additional equipment:
* 2-inch kingpin
* A galvanized steel front bulkhead, approx. 400 mm high
* Yellow-red air couplings on the galvanized connection strip at the front.
* Steering from the front and rear via cable remote control, operated with push buttons, with single-axle steering control (without installation in the central unit).
* Electro-hydraulic unit (± 45 kg)
* Mounting rail for aluminum approach ramps at the rear of the vehicle.
* On the gooseneck and at the rear plate, one mounting for warning signs on the left and right, including a socket.
* On the gooseneck, aluminum side boards and rear wall, plug-in, approx. 2,440 x 400 mm (L x H).
* The rear galvanized plug-in supports are removable. (Length of the superstructure approx. 2,560 mm). (± 46 kg)
* 2 work spotlights with switch on the trailer, mounted on the gooseneck pod on the left and right.
* A tool box INOX, approx. 1,350 x 400 x 400 mm, on the gooseneck (± 46 kg).
* 6 pairs of pocket for plug-in supports approx. 100 x 50 mm in the outer frame of the loading platform.
* 2 pairs in the outer frame of the chassis (± 29 kg) wideners, galvanized, extendable by approx. 230 mm per side (± 262 kg)
* Hydraulic connections from the gooseneck to the low-bed with multi-coupling instead of screw couplings. No guarantee on seals (±4 kg).
* Central lubrication system with 2 BEKAMAX (Pico) pumps with normal grease NLGI-2 and removable protection around the pump (± 26 kg)
* 2 pairs of WADER container pockets in the loading platform, for 1x20' container (± 20 kg).
* A removable galvanized intermediate table with 1 pair of WADER container pockets (± 118 kg).
* 1 pair of steel ramps for bridging the receiving hooks of the low-bed (± 60 kg).
* On the loading platform, a painted sand layer
Success:
Your message has been sent.
Listing
Essen
7,650 km
Standard tractor unit
MANTGX 26.540 6x2/4 BL SA
MANTGX 26.540 6x2/4 BL SA
Call
Condition: new, power: 397 kW (539.77 HP), overall weight: 28,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website.
Excerpt from the equipment list. Complete equipment details available upon request.
460 l fuel tank volume, left 0P4DQ
80 l AdBlue tank volume, right 0PHOV
Electronic Braking System (EBS) 0P0BL
Anti-lock Braking System (ABS) 0P0BE
Full Brake Assist 0P0CM
High-performance engine brake MAN EVBec, adjustable 0P0BW
Retarder Eco, speed-dependent, adjustable, energy-efficient 0P0BR
Disc brakes on front axle 0P1I9
Disc brakes on front steered axle 0P1IC
Disc brakes on rear axle 0P1I4
Diesel engine MAN D2676 LFBI, 397 kW (540 hp) power, 2,650 Nm torque, Euro 6e 0PKPG
MAN TipMatic 12.28 OD, with Retarder 35 0P5VX
MAN TipMatic control, with steering column lever, manual (DNR selection, shift strategy selection) 0P3KI
Required tire speed index J (100 km/h) 0PFW2
Front axle tires Continental 385/55R22.5 Conti EfficientPro HS5, steering axle, tubeless 0PNNY
Front steered axle tires Continental 385/55R22.5 Conti EfficientPro HS5, steering axle, tubeless 0PNN0
Rear axle tires Continental 315/70R22.5 Conti EfficientPro HD5, drive axle, tubeless 0PNMI
6x2/4 0P3B5
Front axle VOK-09, 9,200 kg, non-driven, stub axle, steered, non-liftable 0P5EV
Front steered axle LOL-08, 8,200 kg, non-driven, straight, steered, liftable 0P5E0
Rear axle HY-1360, 13,000 kg, HY axle without through-drive, straight, non-steered, non-liftable 0PIYY
Digital axle load indicator (ALM) for air-suspended axles 0P2IZ
Digital axle load indicator (ALM) for trailer/semi-trailer 0P2J1
Leaf spring suspension on front axle, parabolic, 2-leaf, steel 0P1JD
Air suspension on front steered axle 0P1JB
Air suspension on rear axle 0P1J5
Cab GX: the maximum (wide, long, extra-high) 0P2DI
LED package Plus, headlights, fog lights, cornering lights 0PKWP
Headlights, LED 0P1ZO
Daytime running lights, LED 0P2BP
Fog lights, LED 0P2AI
Driver's seat package Premium, air-suspended, seat heating and seat ventilation 0PKXI
Cab air conditioning
Electric auxiliary heater 0P2NY
Air conditioning, Climatronic 0P2NT
Kedpfs Aldahox Adgodw
Water auxiliary heater, 4 kW 0P2O2
Driver's workplace package Premium with electric front window sun visor and carpet on the engine tunnel 0PKTM
Electronic Stability Program (ESP) 0P1TN
Traction Control System (ASR) 0P1T2
Adaptive Cruise Control (ACC) Stop and Go, distance-regulated 0P1TQ
Speed limiter, adjustable, Limiter (engine regulation) 0P0C3
Emergency Braking Assist (EBA), non-deactivatable 0PHDA
Lane Departure Warning System (LDW), non-deactivatable 0P5DJ
Lane Change Assist (LCA) and turning assistant 0P5DI
Driver Monitoring System 0PVAM
Traffic Sign Recognition 0PHND
Reversing Motion System 0PHNW
Distance Warning 0PKAZ
Infotainment control MAN SmartSelect with touchpad and direct selection buttons 0P3KV
MAN Media System Professional Navigation 12.3 inch 0P2LZ
MAN Sound System Advanced with subwoofer 0P2MI
Navigation map Europe 0P2MX
Saddle coupling JOST JSK 37 C 2 inch 0P1RM
Roof light bar ZLA08
NATO socket ZLA09
CB radio ZLS01
Top coat, door extension and steps, TRAFFIC WHITE RAL 9016 N
Top coat, mudguards, behind cab, TRAFFIC WHITE RAL 9016 N
Top coat, high roof, TRAFFIC WHITE RAL 9016 N
Top coat, bumper, plastic, TRAFFIC WHITE RAL 9016 N
Top coat, Aero package (roof spoiler with side flaps), TRAFFIC WHITE RAL 9016 N
Top coat, cab, TRAFFIC WHITE RAL 9016 N
Success:
Your message has been sent.
Listing
Essen
7,650 km
Low loader semitrailer
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader 2tlg. Rampen
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader 2tlg. Rampen
Call
Condition: new, maximum load weight: 58,860 kg, overall weight: 73,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Below is an excerpt of the equipment. Complete equipment list available upon request.
GOOSENECK
Gooseneck with angled front corners at 45° and rear angle of approximately 750 mm x 10°.
3 pairs of lashing rings (LC 5,000 daN).
Hardwood decking, approximately 30 mm thick.
- 2-inch kingpin
- One galvanized steel front panel, approximately 400 mm high.
LOADING PLATFORM
Loading platform in extendable design with rear angle of approximately 500 mm x 8°.
8 pairs of lashing rings, foldable outwards (LC 10,000 daN).
1 pair of lashing rings, located horizontally at the front of the loading platform (LC 10,000 daN).
Cutouts in the outer frame of the loading platform for attaching lashing straps (LC 2,000 daN).
Hardwood decking, approximately 48 mm thick, with non-slip steel plate decking over the axles.
- On the gooseneck and at the rear, one bracket on the left and right sides for warning signs, including a socket.
- One bracket for a rear marker light at the rear of the trailer.
- Galvanized supports under the angle of the loading platform.
- Electro-hydraulic unit at the rear, under the loading platform (± 45 kg).
HYDRAULIC LOADING RAMPS
One pair of galvanized, two-piece steel ramps, approximately 2,750 + 1,400 x 900 mm, with Super Grip rubber surface.
Ramps with hydraulically extendable and foldable ramp sections.
Hydraulic lifting mechanism, hydraulically movable.
Maximum load per pair: 50,000 kg
- Super Grip 25 rubber surface in the angle of the loading platform.
- Cover plates to bridge the gap between the ramps and the loading platform (± 17 kg).
FIFTH WHEEL LANDING GEAR
JOST fifth wheel landing gear, mechanical, with a 2-speed gear for an approximate lifting capacity of 24 tons (approx. 50 tons test load).
TIRES
Tires 235/75 R17.5 3PMSF - Manufacturer of our choice
TPMS
Kedpfx Ao Aldaledgsdw
TPMS tire pressure monitoring system according to ECE R 141.
AXLES
BPW axles and suspension, 1st axle with steering knuckle, 2nd + 3rd axle rigid, 4th + 5th axle with steering knuckle.
Technical axle load: 12,000 kg each.
1st, 4th, and 5th axles with electromagnetic reverse lock via reverse gear and manually activated.
BRAKE SYSTEM
WABCO brake system according to EU regulations with EBS-E (2S2M)
PAINTING
HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection.
Trailer, carmine red (RAL 3002)
Incl. accessories
On the gooseneck, aluminum side and rear panels, plug-in design, approximately 2,440 x 400 mm (L x H).
The rear galvanized plug-in uprights are removable. (Length of the superstructure approx. 2,560 mm). (± 46 kg)
One galvanized toolbox, integrated into the angled gooseneck (± 47 kg).
3 pairs of WADER container pockets in the loading platform for a 20' (30') or 40' container. (± 30 kg)
6 pairs of upright pockets for plug-in uprights, approximately 100 x 50 mm, in the outer frame of the loading platform. (± 18 kg)
Extensions, galvanized, extendable by approximately 230 mm on each side (± 262 kg).
Lift axle on the front axle with control via TEBS E, depending on the current axle load and the current loading condition (± 69 kg).
Success:
Your message has been sent.
Listing
Essen
7,650 km
Working platform semitrailer
ES-GE3-Achs Sattelanhänger - Bordwände + CV
ES-GE3-Achs Sattelanhänger - Bordwände + CV
Call
Condition: new, maximum load weight: 35,440 kg, overall weight: 43,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website.
Excerpt from the equipment:
Complete equipment available upon request.
Chassis
* Welded construction made of high-quality steel profiles with continuous profile crossmembers, designed for high point loads.
* Underrun protection, width approx. 700 mm, outer frame as a UNP profile, wear plate approx. 8 mm, front neck height approx. 130 mm.
Coupling device
* 2-inch kingpin hitch: 2 x 12 t hitches with level foot and single-side operation on the right-hand side.
Axles
* 3 x 9 t air suspension axle unit, disc brakes 22.5, total travel approx. 180 mm, lifting and lowering device via rotary valve.
Braking system
* Two-circuit air brake system according to EC with EBS and RSS.
* Automatic load-dependent regulation.
* Spring brake cylinders as parking brake.
* Interlock-protected coupling heads fixed to the front cross member, without connection line to the towing vehicle.
Tires
* 6, 385/55 R22,5 160J on steel rim 11.75 X 22,5 ET 120.
* Manufacturer of our choice, tire pressure monitoring system (TPMS) via CAN-bus system of the EBS.
Load securing
* 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 5.0 t.
* 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.0 t.
* In the outer frame, holes approx. every 400-600 mm for attaching lashing straps.
Front wall
* Reinforced steel construction, fixed, approx. 1,400 mm high, interior paneling with approx. 9 mm screen-printed sheet (approx. 1,250 mm high).
Floor
* Approx. 28 mm Z-hardwood floor recessed in the outer frame with galvanized omega steel profiles.
Kjde Aldapopfx Adgodw
Lighting system
* According to EC, 24 volts.
* With multi-chamber lights.
* LED side marker lights.
* LED position lights, white, front.
* LED outline lights, rear.
* License plate lights.
* Lane-keeping lights, LED. 1x15- and 2x7-pin connectors on the front cross member.
Equipment
* 2 wheel chocks with holder.
* Warning signs ECE 70.
* Holder for rotating beacon, including rotating beacon.
* 2 rubber rub rails at the rear.
* Folding and extendable ladder at the rear right (without platform).
* 1 open box made of perforated sheet, transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind the axles.
Paint
* Front wall: RAL 9005 deep black.
* Chassis: Hot-dip galvanized, outer frame hot-dip galvanized + RAL 9005 deep black.
* Middle beams: RAL 9005 deep black.
* SSV: Aluminum, anodized.
* Underrun protection: white (RAL 9016 traffic white).
* Components: galvanized/black KTL coating.
* Rims: silver.
* Contour marking: complete, yellow.
Incl. accessories
* First axle can be lifted, with fully automatic, load-dependent lift control.
* 10 pairs of stake pockets in the outer frame, evenly distributed.
* 4 rows of stake pockets transverse to the loading area.
* 20 pieces of stakes made of galvanized tube 80/50, total length approx. 1,200 mm.
* Inside on the front wall, a magazine for 20 pieces of plug-in stakes.
* 5 x 250 mm side walls and rear wall made of anodized aluminum hollow profiles, foldable and removable.
* Removable Kinnegrip stakes.
* Side wall and stake magazine: under the chassis, left and right, slide rails for side walls and stakes. Container locks for 1 x 40" and 2 x 20" containers, flush at the rear. Container locks for 1 x 20" container, in the middle.
* Work lights on the lamp carrier (switched on when reverse gear is eng
Success:
Your message has been sent.
Listing
Lehrte
7,775 km
Tower crane
LIEBHERRLTM 109-4.1
LIEBHERRLTM 109-4.1
Call
Condition: used, Year of construction: 2006, Equipment: ABS, all wheel drive, Liebherr LTM 1090-4.1
Kdsdj Alc U Sepfx Adgew
with full radio control for all functions
Tires: 80% tread
52-meter boom
19-meter jib (optional)
8x8 drive
very good, well-maintained condition
no outstanding maintenance
the crane was overhauled in 2023
Renewed parts: slewing ring / hydraulic blocks / axle struts /
steering cylinder / brakes / hoisting rope / turbocharger / and many other parts
in daily use with us
very reliable and good crane
Here is our Liebherr LTM 1090-4.1 from 2006
The crane is equipped with:
* Condition: very neat condition
* 52 meters
* hydraulic jib 19 m / optional
* Counterweight: complete
* Drive: 8x8
* Extras: Remote control
This crane has been fully serviced and inspected in our own workshop. It is free of any defects and ready for immediate use.
Success:
Your message has been sent.
Listing
Lehrte
7,775 km
Fire truck
MERCEDES-BENZSprinter 519 4x4 WOMO
MERCEDES-BENZSprinter 519 4x4 WOMO
Call
Condition: used, mileage: 282,000 km, power: 140 kW (190.35 HP), first registration: 04/2016, fuel type: diesel, overall weight: 4,800 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 5, total height: 2,850 mm, Year of construction: 2016, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), parking heater, soot filter, RTW 519 4x4 box van
Perfect for camper van conversion
The vehicle has been completely repainted
Axles completely overhauled
MB Sprinter RTW according to DIN EN1789 / DIN EN 13500
Sandwich box body including auxiliary water heater, etc.
* Sandwich aluminum/GRP box body with deep-drawn box access door, vacuum mattress door inside
* Rear portal: work lights, reversing camera
* Vehicle lights and warning lights
* Vehicle rear with sprung ram protection / rear step mounted
* Ceiling center, patient compartment floor, design of the doors, pull-out cabinets, compressor refrigerator, hinged device holders, oxygen lines, blue light system CAN bus central electrical system, lighting of the exterior storage compartments and interior lighting conform to the usual EU standard for RTWs, with all-wheel drive
* Every carrying system can be adapted and installed
Very, very good condition, ready for immediate use / Vehicle has been refurbished, no dents or scratches / Stretcher available at an extra cost / ABS + ASR, ESP / 2x airbag / electric exterior mirrors / electric windows / 2x battery 12 V 88 AH / engine preheating / auxiliary heater / power steering / reinforced stabilizer / tachograph / air conditioning / immobilizer / work light at the rear, external connection 220V / fire extinguisher / center armrest / reversing camera / reading light / radio pre-wiring / optical warning system / light bar & front flashing lights, acoustic warning system.
Financing or lease purchase possible!!!
Our used special vehicles are inspected, refurbished, and maintained by an experienced team of service technicians from the special vehicle industry, so that a TÜV or DEKRA seal is as natural as the immediate readiness for use of all ambulances.
Vehicle is almost like new!!!
Sale without medical and technical equipment, but this can be purchased separately.
Kodpo Aldaajfx Adgjdw
Our service - for you!
* 20-40 immediately available RTWs always available in our facility
* DEKRA or TÜV seal available on request
* FINANCIAL SERVICE - financing, leasing or lease purchase can be tailored to your individual needs
* WARRANTY - up to 36 months possible for an extra charge
* Accident replacement vehicles in stock
* REFURBISHMENT - All vehicles are professionally prepared by our team for you
* You can find more vehicle offers and service points at:
We look forward to your call / The G&G team is always available to assist you.
We speak Italian, English, Polish and Spanish and can certainly help you if you are looking for a good used RTW.
This advertisement serves only as a preview of our vehicle and is not part of a purchase contract. Information provided on the internet are non-binding descriptions and do not constitute guaranteed characteristics. The seller is not liable for errors, typing errors and data transmission errors. Changes and prior sale reserved!
Success:
Your message has been sent.
Listing
Lehrte
7,775 km
Truck mounted crane
LIEBHERRLTM 1090 - 4.1
LIEBHERRLTM 1090 - 4.1
Call
Condition: used, mileage: 199,999 km, first registration: 06/2006, fuel type: diesel, axle configuration: > 3 axles, brakes: retarder, color: yellow, gearing type: automatic, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2006, Equipment: ABS, all wheel drive, parking heater, Liebherr LTM 1090-4.1
Equipped with full remote control for all functions
Tires: 80% tread
52-meter boom
19-meter jib (optional)
Very well-maintained, in excellent condition
No pending maintenance
Kdedpfxj Aldads Adgjw
The crane was overhauled in 2023
Replaced parts: slewing bearing / hydraulic blocks / axle struts /
steering cylinder / brakes / hoisting rope / turbocharger / and many other parts
Used daily by us
Very reliable and well-maintained crane
Here is our Liebherr LTM 1090-4.1 from 2006
The crane is equipped with: *Condition: very neat condition
* 52 meters
* hydraulic jib 19 m / optional
* Counterweight: complete
* Drive: 8x8
* Extras: Remote control
This crane has been fully serviced and inspected in our own workshop. It is free of any defects and ready for immediate use.
Success:
Your message has been sent.
Listing
Winterswijk
7,607 km
Electric 4-wheel forklift
LindeE30H-01/600
LindeE30H-01/600
Call
Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 1,436 h, load capacity: 3,000 kg, lifting height: 4,830 mm, mast type: triplex, construction height: 2,220 mm, drive type: Lithium-Ionen, Electric 4-wheel forklift
Load center: 600
Mast type: Triplex
Condition: Ready for use and fully functional
Technical condition: good
Front tire type: Superelastic
Rear tire type: Superelastic
Battery voltage: 80V
Kdsds Alc U Ijpfx Adgsw
Battery type: Lithium-ion
3. Valve, windshield, full cabin, interior mirror, windshield wiper, seat heating
Success:
Your message has been sent.
Listing
Neumünster
7,659 km
Mini excavator
VOLVOECR25D / 2017 BJ / 3.461 H / 3 x Löffel
VOLVOECR25D / 2017 BJ / 3.461 H / 3 x Löffel
Call
Condition: used, Year of construction: 2017, operating hours: 3,461 h, Volvo ECR25D mini excavator, manufactured in 2017, with 3 buckets!
----* Manufacturer: Volvo
Kodpfx Ade Aldcgegsdw
* Type: ECR25D
* Year of manufacture: 2017
* Recorded operating hours: approx. 3,461
* Operating weight: 2,490 kg
* Includes 3 buckets
* Mechanical quick coupler
* CE declaration available
* First owner
* Further photos and video available upon request (WhatsApp Erik)
* Price: 15,900 euros, net + 19% VAT
----For further questions, please call:
Erik Kortum: WhatsApp
All information is without guarantee, errors and prior sale excepted.
Success:
Your message has been sent.
Listing
Neumünster
7,659 km
Mini excavator
CATERPILLAR301.8 / Powertilt / 2 x Löffel / MS01 / 1.069 H
CATERPILLAR301.8 / Powertilt / 2 x Löffel / MS01 / 1.069 H
Call
Condition: used, Year of construction: 2021, operating hours: 1,069 h, CAT 301.8 mini excavator, manufactured in 2021, with only 1,069 operating hours!
Powertilt!
----* Manufacturer: CAT
* Model: 301.8
* Year of manufacture: 2021
* Operating hours: approx. 1,069
* Powertilt
* Includes quick coupler MS01
Kdedpe Aldckjfx Adgow
* Includes 1 x digging bucket
* Includes 1 x deep digging bucket
* Adjustable undercarriage
* German machine
* Good condition
* More photos and video available upon request (WhatsApp Erik)
* Price: 19,900 Euros, net + 19% VAT
----For further questions, please call:
Erik Kortum: WhatsApp
?All information is subject to change without notice and does not constitute a guarantee. Errors and prior sale excepted.?
Success:
Your message has been sent.
Listing
Neumünster
7,659 km
Mini excavator
CATERPILLAR301.8 / Powertilt / 2 x Löffel / HS01 / 1.303 H
CATERPILLAR301.8 / Powertilt / 2 x Löffel / HS01 / 1.303 H
Call
Condition: used, Year of construction: 2021, operating hours: 1,303 h, CAT 301.8 mini excavator, manufactured in 2021, with only 1,303 operating hours!
Powertilt!
----* Manufacturer: CAT
* Model: 301.8
* Year of manufacture: 2021
* Operating hours: approx. 1,303
* Powertilt
* Includes hydraulic quick coupler HS01 / MS01
* Includes 1 x digging bucket
Kdodpfx As Aldcrodgow
* Includes 1 x deep excavation bucket
* Extendable undercarriage
* German machine
* Good condition
* More photos and video available upon request (WhatsApp Erik)
* Price: 19,900 Euros, net + 19% VAT
----For further questions, please call:
Erik Kortum: WhatsApp
?All information without guarantee. Errors and prior sale are subject to change.?
Success:
Your message has been sent.
Listing
Neumünster
7,659 km
Mini excavator
CATERPILLAR301.8 / Powertilt / 2 x Löffel / MS01 / 959 H
CATERPILLAR301.8 / Powertilt / 2 x Löffel / MS01 / 959 H
Call
Condition: used, Year of construction: 2022, operating hours: 959 h, CAT 301.8 mini excavator, manufactured in 2022, with only 959 operating hours!
Powertilt!
----* Manufacturer: CAT
* Type: 301.8
* Year of manufacture: 2022
* Operating hours: approx. 959
* Powertilt
* Incl. MS01 quick coupler
* Incl. 1 x digging bucket
* Incl. 1 x deep digging bucket
* Extendable undercarriage
* German machine
* Good condition
* More photos and video available on request (WhatsApp Erik)
* Price: €20,900, net + 19% VAT
----For further questions, please call:
Erik Kortum: WhatsApp
Kdsdpfx Ae Aldcvjdgew
?All information without guarantee, errors and prior sale excepted.

































































































































































































































































































































































