Vermeulen Metaal BV

Condition: used, Year of construction: 2006, machine/vehicle number: IntNr231573, A used MORI SEIKI NL 2500/1250 CNC lathe, year of manufacture 2006, is available for sale. The machine is equipped with a MORI SEIKI MSX 850III / MAPPS III control system and an IRCO SIMAG bar feeder for automatic bar loading. Technical data Control: MORI SEIKI MSX 850III / MAPPS III Origin: Japan Design: Slant-bed CNC lathe Centre distance: 1,250 mm Maximum turning length: 1,298 mm Maximum turning diameter: 356 mm Standard turning diameter: 275 mm Swing diameter over bed: 923 mm X-axis travel: 260 mm Z-axis travel: 1,345 mm Spindle speed: up to 4,000 rpm Spindle bore: approx. 80 mm Turret: 12 stations Number of turrets: 1 Chip conveyor Driven tools C-axis Y-axis Machine weight: 7,600 kg Machine dimensions (L x W x H): 5,000 x 2,300 x 2,400 mm The machine can be inspected under power by prior appointment. Technical data and specifications subject to change and error. Sale subject to prior sale. Dcedoy N Tqbopfx Anwsg

Condition: used, Year of construction: 2005, machine/vehicle number: IntNr231574, Machine Specifications Djdpfjy N Tpkjx Anwocg Control: MORI SEIKI MSX-850 Design: Slant-bed turning center Version: SY with Y-axis Turret: 12-position with driven tools Working Area Max. turning diameter: 356 mm Standard turning diameter: 275 mm Max. turning length: 705 mm Traverse Travels X-axis: 260 mm Y-axis: ±50 mm / total approx. 100 mm Z-axis: approx. 795 mm Rapid traverse X/Y/Z: 30 m/min Counter spindle LNS Quick Load Servo 2 bar feeder Max. bar length: approx. 1,500–1,600 mm / 63" The machine can be inspected under power by appointment. Specifications and technical details are subject to change and error. Prior sale reserved.

Condition: used, CNC lathe HYUNDAI SKT200M Djdpfxoy N Ecve Anwecg

Condition: used, Year of construction: 2004, BIGLIA B 470 YSM LATHE LATHE WITH Y AXIS SUB-SPINDLE 2 MOTORIZED TURRETS FANUC 18i-TB CNC CONTROL CAPACITY: Max working diameter from bar (main spindle/sub-spindle): 68/45 mm Max working diameter (chucking, main spindle/sub-spindle): 200/160 mm Max working length (main spindle/sub-spindle): 300/200 mm Max swing diameter (main spindle/sub-spindle): 200/160 mm Bar passage (main spindle): 65 mm SPINDLE: Main spindle/sub-spindle speed range: 100–4000 / 100–4000 rpm Spindle nose (main spindle/sub-spindle): ASA 6'' / ASA 5'' Spindle bore (main spindle/sub-spindle): 80/56 mm Spindle motor power (50% duty cycle) (main spindle/sub-spindle): 22-26 / 5.7-7.5 kW UPPER/LOWER TURRET: Number of driven tool positions: 12 Driven tool speed range: 100–3000 rpm Drive motor power: 1.1–3.7 kW (25% duty cycle) AXES: X-axis travel (main spindle/sub-spindle): 160/158 mm Z-axis travel (main spindle/sub-spindle): 390/240 mm Y-axis travel (main spindle): 100 mm (40-60) B-axis travel (sub-spindle): 420 mm C AXIS (CONTROLLED): Minimum programmable value: 0.001° Dcodpfx Aey Ndx Aenwog DIMENSIONS: Overall dimensions with chip conveyor: 4107 x 2128 x 2204h mm EQUIPPED WITH: – Chip conveyor

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 313154, spindle bore: 79 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 25 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 24 m/min, total height: 2,500 mm, total length: 5,000 mm, total width: 2,000 mm, overall weight: 4,000 kg, controller manufacturer: GRUNDIG, controller model: ELTROPILOT, input voltage: 400 V, input frequency: 50 Hz, input current: 64 A, nominal power (apparent): 44 kVA, number of slots in tool magazine: 12, number of driven tool stations in tool turret 1: 6, Equipment: documentation/manual, GILDEMEISTER CTX 400 E CNC Lathe - Swing diameter over bedway cover: 570 mm Dcsdpfjy I Tcujx Anwog - Swing diameter over cross-slide cover: 420 mm - Cross travel (X-axis): 220 mm - Longitudinal travel (Z-axis): 635 mm - Main spindle headstock diameter: 170 mm - Spindle diameter in front bearing: 120 mm - Chuck diameter: 200/250 mm - C-axis speed: 100 rpm - Holding torque: 200 Nm - Indexing accuracy: 0.04° - Including 12-station tool turret, with 6 driven positions - Tailstock diameter (front): 80 mm - Tailstock travel: 515 mm - Tailstock taper: MT 4 The machine is equipped with a tailstock, tool holders in the tool turret, and a three-jaw chuck, diameter: 200 mm. Attention: The item must be collected bindingly between 24.08. and 27.08.2026 by prior arrangement. FCA D-61352 Bad Homburg – loaded onto truck

Condition: good (used), Year of construction: 1989, functionality: fully functional, Mazatrol T32 control, turret, tailstock, extensive accessories Dsdpfxsy H Iz Ns Anwecg

Condition: used, Year of construction: 2023, MAZAK - QTE-200MY SG - 2023 - 825 working hours only - maximum turning diameter: 695 mm - standard machining diameter: 235 mm - chuck size: 8" - maximum machining length: 535.0 mm - maximum machining diameter: 340 mm - maximum bar diameter: 65 mm - Ø65 mm with chuck BR08A615 - Ø52 mm with chuck B208A615 - maximum chuck load: 200 kg - maximum workpiece weight (shaft machining): 500 kg - distance from spindle nose to tailstock: 81 – 686 mm Main Spindle - maximum speed: 5000 rpm - minimum speed: 35 rpm - spindle nose: JIS A2-6 - acceleration / deceleration time: 2.64 s - motor power (25% duty): 15.0 kW - motor power (continuous): 11.0 kW - maximum torque: 167 Nm Turret (Tool Head) - number of stations: 12 - external turning tool size: 25 mm - internal turning tool size: 40 mm - drill tool size: 20 mm - Mmilling tool size: 20 mm - threading tool size: M20 Dodpfxoy Hf Els Anwecg - indexing time (one step): 0.23 s - indexing time (full rotation): 0.63 s - driven tool power (continuous): 3.7 kW - driven tool power (40% duty): 5.5 kW - max. driven tool speed: 4500 rpm - min. driven tool speed: 20 rpm - max. driven tool torque: 47 Nm Tailstock - taper: MT No.5 - stroke: 565 mm - maximum thrust force: 5000 N Axis Movements - rapid traverse X: 30 m/min - rapid traverse Y: 10 m/min - rapid traverse Z: 30 m/min - C-axis speed: 555 rpm - travel X: 215 mm - travel Y: 100 mm - travel Z: 605 mm Additional - coolant tank capacity: 225 L - coolant pump: MTA70H-250 A-W-A-B (GRUNDFOS) - number of pumps: 1 - pump power: 0.25 kW - machine power consumption (40%): 27.8 kVA - continuous power consumption: 22.0 kVA - air pressure: 0.5 MPa - air consumption: 370 L/min Machine Dimensions - spindle center height: 1020 mm - length: 2785 mm - width: 1690 mm  - height: 1725 mm - weight: 4650 kg

Condition: ready for operation (used), Year of construction: 2007, operating hours: 17,069 h, functionality: fully functional, 1 BIGLIA B 470 YSM lathe from 2007, CNC FANUC 18i-T, 17,069 working hours. Main spindle bar capacity 68mm – 4000rpm – C axis 360000. Counter spindle bar capacity 42mm – 4000rpm – C axis 360000. 2 turrets with 12 powered stations each. Set of fixed and driven tool holders included. Very good condition. Dcodpfx Asy E Smmenwog

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, MAZAK QUICK TURN SMART 200M 500U Max. turning diameter: 360 mm Max. turning length: 532 mm Dcjdpfjy D Awtex Anwjg Max. milling speed: 4,500 rpm Max. spindle speed: 5,000 rpm Max. bar diameter: 65 mm Machine is equipped with: - Mazatrol Smart CNC control - KITAGAWA three-jaw chuck BB-208, diameter 210 mm - Tool Eye - C-axis - Interface for bar feeder - automatic parts catcher - NC tailstock - high-capacity coolant pump - chip conveyor, side ejection - 8 static tool holders - 2 driven tool holders

Condition: used, Year of construction: 2001, functionality: fully functional, Equipment: documentation/manual, Biglia lathe Model B 445 52M Year 2001 CNC Fanuc With Iemca bar feeder Dcodey A Rihjpfx Anwsg With tooling

Condition: used, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Gildemeister lathe Dcedpfxoy A Imqs Anwog Color: Pink Rose 3 axes X, Z, C Type: CTX 400 Series 2 CNC Heidenhain With conveyor With driven tooling With documentation

Condition: used, Year of construction: 2002, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Gildemeister Lathe Color: White 3 axes X, Z, C Model: CTX 400 Series 2 CNC Heidenhain With chip conveyor With driven tooling With documentation Djdjy A Ilyspfx Anwjcg

Condition: used, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Gildemeister lathe Color: White 3 axes X, Z, C Model: CTX 410 CNC: Heidenhain With chip conveyor With driven tooling With documentation Djdsy A Ikcjpfx Anwecg

Condition: used, Year of construction: 1995, BIGLIA B 500 M LATHE POWERED (LIVE TOOLING) CHUCK DIAMETER: 210 mm MAX. BAR WORKING DIAMETER: 70 mm MAX. TURNING LENGTH: 500 mm Dcedpjy A Eanofx Anwsg TRAVELS: X: 220 mm Z: 500 mm Y (tailstock): 600 mm ACCESSORIES: 2 TILTABLE LIVE TOOLS, BRAND ALBERTI 2 RADIAL LIVE TOOLS 3 AXIAL LIVE TOOLS VARIOUS FIXED TOOLHOLDERS CHIP CONVEYOR COMPLETE DOCUMENTATION MACHINE IN PERFECT CONDITION YEAR: 1995

Condition: excellent (used), functionality: fully functional, • Muratec MT 25 MYY / Gantry Loader / Bar Loader. • Two C-axes. • Two Y-axes. • Highly automated machine. • 8 kg gantry loader robot system for part loading and unloading. • 1.5-meter CNC bar feeder. • Machine with 9 controlled axes. • Two twin spindles. • Two turrets. • Turrets with 15 positions each, all motorized. • Integrated spindle motor: 15 kW. • Motor starting torque: 420 N·m. • Motorized tool drive: 4 kW. • Spindle nose: A2-6. • Maximum turning diameter: 370 mm. • Maximum turning length: 920 mm. • Bar capacity: 67 mm. • Prismatic guides on all axes. • Two Kitagawa 250 mm hydraulic chucks per spindle. • Separate compartment for the inspection of machined parts. • Automatic finished-part pickup arm for small parts. • Automatic secondary spindle cleaning with air or coolant. • Conveyor belt for finished parts. • Automatic load monitoring and tool wear detection. • Automatic inter-spindle part transfer system with torque control. • Fanuc CNC. • Fanuc motors, servos, electronics, and controls. • Rapid traverse speeds: 20 and 25 m/min. • Main spindle speed: 3,500 rpm. • Motorized tool speed: 3,000 rpm. Dedpfx Ansy A D R Eowocg • Turret indexing time: 0.2 seconds. • Rear-mounted, hinged chip conveyor. • Complete set of static tool holders for external and internal machining included. • Complete set of motor-driven axial and radial tool holders included. • Machine currently in operation. • Weight: 10,800 kg. • Immediate availability, unless previously sold.

Condition: used, Year of construction: 2003, MURATEC - MW200 (Ref: - disconnected but can be reconnected - complete machines with all periferies - can be tested upon agreement Available MURATECs: MURATEC - MD120 - 2007 MURATEC - MS60 - 2008 MURATEC - MW200 (Ref: MURATEC - MW120 (Ref: - MURATEC - MW120 (Ref: MURATEC - MW120 (Ref: - MURATEC - MW120 (Ref: 116) - 2007 MURATEC - MW120 (Ref: 117) - 2007 MURATEC - MW120 (Ref: 118) - 2008 MURATEC - MW120 (Ref: 119) - 2008 Dsdpfjyzh N Nex Anwscg

Condition: used, Year of construction: 1997, Biglia B.111 CNC Lathe CNC Fanuc 0T Specifications: Max turning diameter: 200 mm Turning length: 300 mm Spindle: Bar capacity: 42 mm Speed: 5,000 rpm Power: 7.5 kW 1 turret with 12 tool stations Ladner 3-jaw chuck X-axis: 110 mm Dcedoyzh H Iepfx Anwog Z-axis: 300 mm

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, For sale: CNC Lathe GILDEMEISTER CTX 410 V3 with Driven Tools TECHNICAL AND VISUAL CONDITION: Very Good Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 410 V3 Control System: Heidenhain 4290 Dcedoyy S R Uspfx Anwsg Country of Manufacture: Germany Year of manufacture: 2006 The machine is fully equipped with fixed and driven tool holders. Machine specifications: - Turret: 12 tooling positions for VDI-30 tool holders (all stations driven) - Maximum spindle speed: 5000 rpm - C-axis - Driven tools - Tailstock - Maximum turning diameter X-axis: 320 mm - Maximum turning length Z-axis: 600 mm - Coolant system - Hydraulic collet chuck on main spindle (option to convert to 3-jaw chuck) - Through-spindle (spindle bore diameter: 66 mm) - Parts catcher - Chip conveyor - Full programming manual - Mechanical and electrical documentation - Machine weight: 5 tons - Loading included in the price The machine has undergone a complete inspection. 100% functional. Connected and ready for operation. Stal-Com has been specializing in the sale, servicing, and training for CNC machines from the DMG group for 20 years. We specialize in all models of Gildemeister lathes and Deckel Maho machining centers. All our machines undergo thorough technical inspections. Our clients include not only Polish customers but also buyers from all over Europe and parts of Asia. Each machine can be inspected in production, as we also undertake machining services. After purchasing a machine from us, we provide staff training and can also set up part production at the customer's location. We cooperate on an ongoing basis with many companies to whom we supply successive machine tools.

Condition: reconditioned (used), Year of construction: 2012, functionality: fully functional, MAZAK QUICK TURN NEXUS 250-II MY Max. turning diameter: 380 mm Max. machining length: 504 mm Max. milling speed: 4,500 rpm Max. spindle speed: 4,000 rpm Max. bar diameter: 74 mm Machine is equipped with: - CNC control Mazatrol Matrix Nexus 2 Djdpoyy Ad Ejfx Anwecg - KITAGAWA three-jaw chuck B-210, diameter 254 mm - Tool Eye - C-axis - Y-axis - automatic parts catcher - NC tailstock - reinforced coolant pump - MAYFRAN chip conveyor - 8 fixed tool holders - 2 driven tool holders

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, X-axis travel: 140 mm Y-axis travel: +/- 40 mm Z-axis travel (1+2): 450 / 410 mm Turning length: 750 mm Turning diameter over cross slide: 250 mm Turning diameter: 190 mm Distance between centres: 750 mm Max. bar diameter: 52 mm Spindle speed (max.): 4,000 rpm Main spindle speed range: 60 - 6,000 rpm Drive power - main spindle: 22 / 18.5 kW Max. torque: 198 Nm Counter spindle B-axis travel: 525 mm Feeds Feed rate X (1+2): 18,000 mm/min Feed rate Y: 6,000 mm/min Feed rate Z (1+2): 24,000 mm/min Feed rate B: 24,000 mm/min Number of turrets: 2 Number of tool stations: 2x 16 pos. Shank height for square tool: 20 mm Shank diameter for drills: 25 mm Turret indexing time: 0.2 s Tool holder: VDI 30 Speed range - driven tool stations (max.): 6,000 rpm Drive power - driven tool stations: 5.5 / 3.7 / 2.2 kW Rapid traverse X (1+2): 18 m/min Rapid traverse Y: 6 m/min Rapid traverse Z (1+2): 24 m/min Rapid traverse B: 24 m/min Rapid traverse C: 400 rpm MACHINE DETAILS Dsdpfxjyyupmj Anwecg Control: MSX 501 Fanuc drives Machine is in excellent condition

Condition: good (used), Year of construction: 2019, 400mm swing, 220mm max turning diameter, 510mm cutting length, Siemens 828 Control, 65mm bar capacity, 12 station turret, 17kW Spindle Motor, Dedjyyaq Njpfx Anwecg Spindle Speed 4500rpm, 3 jaw chuck, low volt light, coolant, Tool setter, Tailstock, swarf conveyor,

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, Very neat lathe with powered tools and sub spindle. Year of construction: 2004 Mazatrol 640T NEXUS control 500mm between chucks Max turning diameter: 380mm 2x hydraulic Kitagawa chuck Measuring arm Powered tools with VDI40 adaptor (VDI tools are available at additional charge) C axis Sub spindle Everything is cleaned and ready to use! Machine weight about 5 tons Dcsdpfx Aeyx U Itsnwsg Forklift available to load the machine! Price is excl. VAT This machine is under power to view in Genk!

Condition: excellent (used), Year of construction: 2007, Equipment: documentation/manual, For sale: CNC Lathe GILDEMEISTER CTX 410 V6 with driven tools, Y-axis, and sub-spindle. TECHNICAL AND VISUAL CONDITION: Very Good Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 410 V6 Control system: Heidenhain 4290 Country of origin: Germany Year of manufacture: 2007 The machine is fully equipped with both static and driven tool holders. Machine Specifications: - Turret: 12 positions for VDI-30 tool holders (all stations powered/driven) - Max spindle speed: 5,000 rpm - C-axis on both main and sub-spindle - Driven tools - Y-axis - Sub-spindle - Max turning diameter (X-axis): 320 mm - Max turning length (Z-axis): 600 mm - High-pressure coolant system - Hydraulic 3-jaw chuck 250 mm on the main spindle - Hydraulic 3-jaw chuck 200 mm on the sub-spindle - Through-hole main spindle (bore diameter: 77 mm) - Parts catcher - Chip conveyor - Complete programming manual - Mechanical and electrical documentation - Machine weight: 6 tons - Loading included in the price Dcodpfx Aoyv Sgbjnwog The machine has undergone a full inspection. Fully operational, 100%. Connected and ready for demonstration. Stal-Com Company - for 20 years, we specialize in sales, service, and training on CNC machines from the DMG group. We are experts on all Gildemeister lathe models and Deckel Maho machining centers. All our machines undergo a meticulous technical inspection. Our customers include not only clients from Poland but also from across Europe and parts of Asia. Any machine can be checked during operation as we also provide metalworking services. After purchase, we offer operator training, and we can also set up part production at the client's site. We have ongoing partnerships with many companies, supplying further machine tools as required.

Condition: used, Year of construction: 2006, DOOSAN DAEWOO PUMA 240 Lathe YEAR OF FIRST INSTALLATION: 2007 CNC FANUC Series 21i – TB IMPECCABLE MACHINE LIKE NEW, CONNECTED ANY TEST POSSIBLE CHUCK DIAMETER: 220 mm MAX. SWING OVER BED: 550 mm MAX. SWING OVER CARRIAGE: 390 mm MAX. TURNING DIAMETER OVER BED: 350 mm MAX. TURNING LENGTH FROM CHUCK: 562 mm BAR CAPACITY: 65 mm SPINDLE SPEED: 45 – 4,500 RPM SPINDLE MOTOR POWER: 15 / 18.5 kW TRAVELS: X: 242 mm Z: 580 mm Dcjdpfxeyuqacj Anwsg TOOL TURRET: 12 POSITIONS CHIP CONVEYOR TOOL PRESETTER COMPLETE WITH ALL DOCUMENTATION

Condition: used, Year of construction: 2001, LATHE BIGLIA B 501 SM YEAR: 2001 CNC GE FANUC SERIES 18i - T SUB-SPINDLE LIVE TOOLING BAR CAPACITY: 68 mm MAX. MACHINING DIAMETER FROM SUB-SPINDLE: 250 mm MAX. MACHINING LENGTH: 500 mm MAX. SWING DIAMETER: 520 mm CHUCK DIAMETER 1: 250 mm SUB-SPINDLE CHUCK DIAMETER: 165 mm SPINDLE SPEED 1 AND 2: 40 – 4,000 RPM TOOL TURRET: 12 POSITIONS TYPE: BIDIRECTIONAL TRAVELS: X: 215 mm Z: 510 mm B: 510 mm TOOL PRESETTER CHIP CONVEYOR DRIVEN TOOLS: 2 UNITS COMPLETE DOCUMENTATION Djdpfxsyup Tuo Anwjcg WEIGHT: 5,300 kg