PR Maskin AS

Year of construction: 2024, condition: used, Max. volume flow rate: 1,260m³/h, possible number of filter stages: 1, 2, operating voltage: 3x 400V, PE, N, frequency: 50Hz, rated power: 1.8-2.9kVA, max. rated current: 2.7-6.6A, upstream fuse: 16A, mains connection three-phase AC: 400V, max. rated power: 2.9kVA, max. rated current: 6.6A, upstream fuse: 16A, control cabinet protection rating: IP54, max. differential pressure: 2,380Pa, compressed air quality: factory-supplied, oil-free, dry, max. inlet operating air pressure: 8bar, operating temperature: 5-40°C, weight: 165kg. On-site inspection is possible. Guodpfx Aljz R A Nlj Uoh

Condition: good (used), Stud welding machine, stud welding compact system, stud welding machine, stud welding, stud welding system -Manufacturer: Köcor, stud welding machine with stud welding gun -Type: 902 E -Power: 200 - 900 A -Stud welding gun: K 22 -Welding area: Bolts and pins from M3 – M12 -Quantity: 1x stud welding machine available -Dimensions: 590/300/H510 mm -Weight: 81 kg Gedpfx Alsz N Hlue Uouh

Condition: new, Parker Cutting table Cross-cutting, longitudinal cutting, stacking 280x230x100cm Gsdpfxoz I Rhve Al Uouh New, still in original packaging from the manufacturer! Scope of delivery (see pictures). (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Welding Rotator SARAZIN type HD 100 Maxi loading capacity: 5000 KG Shelf diameter: Ø 1500 mm Shelf diameter with external extensions: Ø 2100 mm Tilting: de 0 to 135° Gedpfx Asz I Df Uel Ujuh New electrical panel with speed variator Voltage: 380 V Length: 2600 mm Width: 2200 mm Height in horizontal position: 1700 mm Weight: approx 4 T

Condition: good (used), Stud welding machine, stud welding compact system, stud welding machine, stud welding, stud welding system -Manufacturer: Heinz Soyer, stud welding machine with stud welding gun -Type: BMS-8H -Connection voltage: 230 V / 50/60 Hz -Stud welding gun: PS-3K -Welding area: Bolts and pins from M3 – M8 or Ø 2 – 8 mm Gjdpez Ilrvofx Al Ueuh -Quantity: 1x stud welding machine available -Dimensions: 350/350/H270 mm -Weight: 15.4 kg

Year of construction: 2011, condition: used, 3D tube cutting machine. Maximum tube length: 1 m. Gsdpfx Alsz Hk S So Usuh The machine is supplied with tooling for the following diameters: 80 - 100 - 110 - 120 - 125 - 130 - 140 - 150 - 153 - 180 - 200 - 230 - 250 - 300 - 350 - 400. Equipped with programming software.

Condition: used, Column resistance welding machine (spot welding machine) with a swing arm and mechanical drive, featuring a digital LCD multi-function control panel. Continuous and pulsed operation for welding steel, stainless steel, and galvanized sheets. Possible operating modes: EASY or EXPERT. Up to 20 individually configurable spot welding programs. Adjustment of spot welding current (%), spot welding time (cycles), pressure, and speed during electrode closing, as well as adjustment of the air flow to slow down the closing of the arms. Selection of various parameters of the spot welding cycle. The electrodes and arms must be cooled with liquid. Column resistance welding machine (spot welding machine) with a swing arm and digital microprocessor control. The digital LCD multi-function control panel enables the following operating modes: EASY (adjustment of spot welding current and spot welding time); EXPERT (adjustment of various spot welding parameters) with the ability to store up to 20 individually created programs. Continuous and pulsed operation ensures the best welds for different types of steel. Features: Spot welding current control (%), spot welding time (cycles), electrode closing force; Selection of various parameters of the spot welding cycle (holding time, ramp time, welding time, pause time, and pulse number); Easy-to-read LCD display; Mechanical drive via foot pedal; Adjustment of the arm span; Thermal protection with indicator. Gjdpfoz D Aa Aox Al Uouh The electrodes and arms of this model must be water-cooled. CODE 824051 TWO-PHASE MAINS VOLTAGE 400 V MAINS FREQUENCY 50 / 60 Hz MAXIMUM SPOT WELDING CURRENT 16400 A MAXIMUM OPEN-CIRCUIT VOLTAGE 4.2 V MAXIMUM POWER CONSUMPTION 60 kVA RATED POWER X=50% 25 POWER FACTOR 0.7 MAXIMUM WELDING THICKNESS FOR 2 SHEETS 5 + 5 mm MAXIMUM ELECTRODE FORCE 220 daN ELECTRODE PROTRUSION 330 mm DUTY CYCLE 5.5 % PROTECTION CLASS IP20 DIMENSIONS 79 x 32 x 128 cm WEIGHT 147 kg

Year of construction: 2011, condition: ready for operation (used), controller manufacturer: KUKA, controller model: KCP2, laser power: 4,000 W, This 6-axis TRUMPF TruLaser Robot 5020 was manufactured in 2011. It features a TRUMPF TruDisk 4002 laser source and includes essential components such as an articulated robot arm, rotary/tilt table, and a chiller unit. If you are looking to get high-quality laser welding capabilities, consider the TRUMPF TruLaser Robot 5020 machine we have for sale. Contact us for further details. Godpfx Alez A Tx Hj Ueuh - Mains Voltage: 400 V- Frequency: 50 Hz- Connected Load: 16 kVA- Control Voltage: 24 V=- Required Fuse: 63 A- Compressed Air Connection: 6 +/- 1 bar- Laser Source: TRUMPF TruDisk 4002- Controller / Teach Pendant: KUKA KCP2- Included Components: Enclosure Cabin, Articulated Robot Arm, Rotary/Tilt Table, Control Panel, Laser Generator Unit, Chiller / Auxiliary Unit

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 701, The electrode drying oven SET-50/4 features 4 shelves, each with 5 separate compartments for electrodes, allowing for organized storage of various electrode types. The capacity of the device is sufficient for the contents of approximately 50 packages of stick electrodes. The housing and door are double-walled and well-insulated. The device has a thermostat with an indicator light, allowing the drying temperature to be adjusted continuously up to 400 °C. The interior, including the shelves, is made entirely of stainless steel. Upon request, we can include an analog thermometer with a display range of 0-400 °C. Thanks to all these features, the SET-50 is the ideal device for stationary applications. Gsdsz Ahcijpfx Al Ueuh It is delivered without a power cable and plug. Capacity: up to 250 kg of electrodes Dimensions in mm: 1080 x 740 x 810 Weight: 65 kg Temperature: 400 °C Heating power: 3700 watts Input voltage: 230 V 50 Hz

Condition: used, Year of construction: 2017, machine/vehicle number: 1739289, input current: 10 A, protection type (IP code): IP20, welding current (max.): 2,000 A, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Supply voltage: 24 V DC / 90 V DC Input current: 1 A / 10 A Welding current: up to 2,000 A at 2% duty cycle Protection class: IP20 Polarity: STD Design: Closed protective housing made of aluminum profiles Safety enclosure: With protective doors MACHINE DETAILS Control cabinet: Integrated Equipment cabinet: Mobile EQUIPMENT Signal light Welding torch Connection cable Mobile equipment cabinet Documentation The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. Guodpfx Aezzk Rmel Ush If the asset is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The information on the technical data is based on the original offer. No liability is accepted for typographical or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: used, functionality: fully functional, Year of construction: 2008, No minimum price – guaranteed sale to the highest bidder! The machines are still assembled but disconnected from the power supply. An 11-ton forklift is available on-site for loading. Guedpfx Aljzy Ulls Ujh For sale is a laser welding system manufactured by TRUMPF, model: TLC 1000P.

Year of construction: 2006, condition: used, An industrial welding robot is offered. Reach: 1450mm, payload: 5kg, operating hours: 2213h, welding power source: ESAB AristoMig 500W, max. welding current: 500A, duty cycle: 60% at 500A/100% at 400A, controller type: IRC, robot variant: 1600-5/1.45, controller: IRC. Equipment: ESAB AristoMig 500W welding power source, IRC control cabinet, linear axes/positioner tracks. Weight: approx. 500kg, overall dimensions X/Y/Z: approx. 1200mm/800mm/1600mm. An inspection is possible by arrangement. Guedpfx Alozy Rv Hj Ueh

Year of construction: 2015, condition: used, A central welding fume extraction system is offered. Airflow: 30000m³/h, airflow: 30000m³/h, motor power: 30kW, compressed air connection: 6-8bar, max. static pressure: 2500Pa, duty cycle: 100%, control: PLC. The system is equipped with 2 spark traps and various ductwork components (extraction arms and hoods not included). An inspection is possible by arrangement. Gusdszy Rvtjpfx Al Ujh

Condition: used, Max. load capacity: 30t/set, min. workpiece diameter at 90°: 466mm, max. workpiece diameter at 30°: 11457mm, roller dimensions: 520mm×355mm, roller covering: rubber, max. speed: 1295mm/min, motor power: 2×1.5kW, weight drive unit/idler unit: 1300kg/700kg. Documentation available. An on-site inspection is possible. Gedpozxr Riefx Al Uouh

Condition: used, Working range: 1250x2250mm, max. feed speed: 48m/min, welding range: M3-M8, welding diameter: 3-8mm, stud length: 8-40mm, max. welding capacity: 30-40studs/min, max. feed: 48m/min, positioning accuracy: +/-0.2mm, length: 2400mm, width: 2700mm, height: 3100mm, the machine has been used very little and is in good condition. An on-site inspection is possible. Gsdpfjzxr N Sox Al Ueuh

Year of construction: 2007, condition: used, functionality: unexamined, machine/vehicle number: 151 000/69, We are offering this used Weil Engineering longitudinal seam welding machine, model Flexmaster 400 WIG, manufactured in 2007. If you have any questions or require further information, please do not hesitate to send us a message or call us. Godpfx Alozxqb Hj Ujuh

Year of construction: 2007, condition: used, Welding power source: Starmatic 1003 DC, max. welding current: 1000A at 100% duty cycle, lifting column height: 4850mm. Including flux tray, rail and vessel turning device. Documentation available. An on-site inspection is possible. Guedpjzxhl Ajfx Al Ush

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 15 h, functionality: fully functional, machine/vehicle number: ET.200.01.2025, overall weight: 134 kg, input voltage: 220 V, input current: 21 A, type of input current: AC, warranty duration: 24 months, Equipment: documentation/manual, METALSELF ET-200 Automatic Orbital Welder + EC-120 Welding Head Ex-Demo (-40%) DESCRIPTION: MACHINE CONDITION: We offer for immediate delivery a Metalself orbital TIG welding system consisting of an ET-200 power source and an EC-120 closed-chamber welding head. The machine (manufactured in 2025) is in LIKE-NEW condition: it has never been used in production and was used exclusively as an internal demonstration unit. Due to its "Ex-Demo" status, the entire system is offered with an exceptional 40% discount on the list price. SYSTEM OVERVIEW: The system automates TIG welding on thin-walled pipes, performing a complete 360° rotation around the joint. It is the ultimate solution for industrial piping, fluid, food, and pharmaceutical systems, ensuring perfect repeatability, impeccable aesthetics, and weld seams free of defects. POWER SOURCE SPECIFICATIONS (ET-200): -Technology: Microprocessor-controlled inverter for millimeter-precise arc control. -Welding current: 5 ~ 200 A. Modes: Direct Current (DC) and Pulsed, ideal for thermal control on stainless steel and titanium. -Interface: Intuitive touch screen with an "Auto Prog" system that automatically generates parameters by simply entering the tube diameter and thickness. -Capacity to store 200 programs. Cooling: Integrated water circulation system. Quality Control: Integrated thermal printer on the machine and USB port for exporting welding reports. -Power supply: 220VAC ±10% - 50/60 Hz (Consumption 4.5 KVA). -Dimensions and Weight: 500 x 380 x 300 mm; 28 kg. WELDING HEAD SPECIFICATIONS (EC-120): -Type: Orbital welding head with closed chamber. -Operating diameter range: from Ø 19 mm to Ø 114.3 mm. -Maximum penetration thickness: ≤ 3 mm. -Shielding gas: Argon. -Cooling: Water-cooled. -Welding head dimensions: 540 x 195 x 54 mm. -Welding head weight: 6.5 kg. THE SUPPLY INCLUDES: -ET-200 power source and EC-120 welding head. -Dedicated trolley for easy and safe movement of the system in the workshop. -Power cables, control connections, ground clamp, and hydraulic/gas tubing. -CE Declaration of Conformity. -Complete user and maintenance manual (including parts list and programming instructions). Guedjzw Uh Ujpfx Al Uoh SALE CONDITIONS: -Price: -40% compared to the new list price. -Delivery: Ex Works (EXW) in Settimo Torinese. -Availability: Immediate. The machine can be viewed at our facility and is available for any testing or practical demonstration.

Condition: used, Year of construction: 1999, Laser source: Bystronic BLT 3500 Turbo, laser power: 3500W, wavelength: 10600nm, max. sheet weight: 160kg/m². Base machine weight: approx. 7000kg, laser source weight: approx. 1600kg. Documentation available. An on-site inspection is possible. Guodjzww Taspfx Al Ujh

Condition: used, Year of construction: 2017, functionality: unexamined, R+P Stud Welding Cell Enclosed protective cell made of aluminum profiles Safety enclosure with protective doors Signal light Integrated control cabinet Documentation available Suitable for automated stud welding processes Nelson Stud Welding Machine Manufacturer: Nelson Stud Welding Type: SD-FSE 1000S Year of manufacture: 2017 Gjdpfx Aszvylpsl Ueuh Serial number: 1739289 Part No.: 80-07-57 Technical data: Supply voltage: 24 V DC / 90 V DC Input current: 1 A / 10 A Welding current: up to 2000 A (duty cycle 2%) Protection class: IP20 Polarity: STD Scope of delivery: Welding gun Connection cable Mobile equipment cabinet Both units were last used together as an automatic stud welding system.

Year of construction: 2018, condition: excellent (used), functionality: fully functional, machine/vehicle number: N20190155, Wet cutting machine Metkon Servocut 502 - AX for sale due to business closure, little use, includes diamond cutting blade. Guedpfx Aezvlqkjl Uoh

Condition: used, An MBK horizontal cage welding machine for the production of small square reinforcement cages is offered. Cage diameter: approx. 200mm-1500mm, max. cage length: 4000mm, wire diameter: 5mm-12mm, welding capacity: approx. 100kVA, control: Zoller+Fröhlich. Machine dimensions: approx. 6000mm/2500mm/2200mm, weight: approx. 8500kg. Inspection possible by arrangement. Gujdpfxszuzzpe Al Ujh

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 18031539, workpiece weight (max.): 750 kg, workpiece diameter (max.): 600 mm, total width: 650 mm, total length: 704 mm, total height: 585 mm, empty load weight: 334 kg, input voltage: 400 V, type of input current: three-phase, JAVAC POS-750AC welding positioner for sale. Technical specifications: - Manufacturer: JAVAC - Model: POS-750AC - Year: 2018 - Serial Number: 18031539 - Input voltage: AC 400 V / 50 Hz - Permissible welding current: 400 A / 100% - Table diameter: 600 mm - Hollow shaft: 60 mm - Table speed: 0.12–1.2 rpm - Tilting range: 0–135° - Max. vertical load: 750 kg - Weight: approx. 334 kg - Approximate dimensions: 704 x 650 x 585 mm Used equipment, sold as is. Gedpfx Alozuyaqs Usuh Currently available for inspection but not connected to power. Condition and completeness are shown in the photos. Location: Estonia. Loading: Forklift and pallet handling facilities are available on-site. We can load the equipment onto the buyer’s truck. Transportation: Transportation costs are the responsibility of the buyer.

Year of construction: 1999, condition: used, Working area X/Y: 1500mm/3000mm, plasma source: NERTAJET HP120, control: DIGISAF 100, max. cutting capacity steel/stainless steel/aluminum: 20mm/15mm/20mm, wet and dry cutting possible, extraction system available. Documentation available. Inspection possible by arrangement. Guedpfxezun U Aj Al Ush

Year of construction: 2007, condition: ready for operation (used), A TRUMPF CNC laser tube cutting system is offered. Max. tube length/outer circle diameter: 6500mm/150mm, Z-axis travel: 170mm, laser power: 2700W, max. material thickness steel/stainless steel/aluminum: 8mm/5mm/4mm, operating hours: 86567h, laser operating hours (laser on/beam on): 81557h/27316h. Including PRS 3001 part-removal station with brush table and LoadMaster Tube with bundle magazine LD 6000. Overall dimensions X/Y/Z: approx. 16000mm/8200mm/2800mm, weight: approx. 17.5t. An on-site inspection is possible. Guedpfx Aeztdr Ujl Ush