Mde Machinery

Condition: good (used), Autobond Mini 105 TPH-RU-SAB-VS Automatic Laminating Machine The most efficient machine on the market from a legendary manufacturer. This advanced machine boasts high performance thanks to an external heating thermostat. Made in Great Britain. Technical specifications: Max sheet size: 1060mm x 1060mm Min sheet size: 320mm x 285mm Min grammage: 115 gsm Max grammage: 650 gsm Operating temperature: 80-135°C Max operating speed: 120m/min Dedps Aitgysfx Aarowd Weight: approx. 4500 kg 380V power supply Additional 8 bar air supply Large-diameter, chrome-plated steel cylinder, filled with water for greater stability. Double-sided laminating Pneumatic clamping, separation, and automatic feeding. Adjustable pressure. High-stack feeding, Heidelberg Speedmaster feed head. Expansion roller for film fixing. Sheet straightening module. Stacker for sheet removal. The machine can operate in pallet-to-pallet or pallet-to-roll configurations. Two independent heating systems for two rollers, and a water-based sheet cooling system via rollers.

Condition: good (used), Eurotecnica 425 CUT Perfect Binder This machine is in perfect technical and visual condition and was used as a backup for the BQ-470 binder. Machine features: – automatic jaw clamping – disc milling with additional scoring units – infeed jogging device – side gluing – control panel – fume extraction from the gluing unit Dwedps Aitgvsfx Aarjd – trim extraction + external vacuum – automatic cover clamping 230V power supply The kit includes glue to start with.

Condition: good (used), Logitrans ELF1001/920 Mobile Paper Stack Lifter This device is in very good condition. Purchased from a small printing company, it’s practically unused. Hydraulic drive, built-in battery, and charger. Battery-powered. The stack lifting and lowering cycle is controlled from a mobile console that can be attached magnetically to the workstation or via the control on the device’s drawbar, ensuring fast operation. Dsdpfx As Aitgrjarowd Load capacity: 1000 kg. Made in Denmark. Pallet/sheet dimensions: 785 x 1150 mm Lifting height: 920 mm. The device can be used as a stack lifter for a machine or as a standard high-lift pallet truck.

Condition: good (used), Process chamber with a new air guidance system in the peak area Cooling zone with condensate filter Transport system (belt conveyor) CAN-BUS control / touch screen color monitor Voltage 230/400V Direction of travel: left to right Infeed height: left to right Infeed height: 830 +/- 20mm Dwodpfx Aae Aitgnorod Fan speed control Bottom-side heating in the peak area

Condition: good (used), Perfecta SL-10 P Paper Stack Lift with Sidewall The device is in perfect technical and visual condition. Virtually unused. Equipped with an adjustable sidewall for easy stacking. Designer look. Lifting capacity: 1000 kg Plate size: 900 x 1300 mm Power supply: 380 V Weight: 650 kg The lift is very easy to move, mounted on wheels. The control panel is adjustable to the right and left. Lifting is operated by a photocell. Dwsde Aitgkspfx Aarjd Quiet hydraulic unit.

Condition: good (used), Baumann Wohlenberg BSW3-1200 Pile Turner Dwjdpfx Ae Aitggoarsd This machine is like new, fully functional, and ready to work. The most equipped turner offered by the German manufacturer Baumann Wohlenberg. This is the currently produced model. Year of manufacture: 2017. Technical specifications: Plate format: 1440 x 850 mm Stack height: 1450 mm Load capacity: 1200 kg Device weight: 2200 kg 380V power supply Control panel, fast operation, hydraulic drive. Equipment: Electronic turn lock Quiet operation. Documentation included. Compact design, space-saving.

Year of construction: 2022, condition: like new (used), The AFOS steam deglazing system has been designed to provide a precise and effective solution to prepare a wide range of frozen fish products for the application of batter and value added coatings Dwedpfx As Aitgcoared

Condition: used, Holz Her Auriga 1308 XL POWER Compact design - edge thickness 0.4 - 8 mm Motorized bridge adjustment PLC screen control Edge-Control, PPC 319W, 18.5" touchscreen monitor iTronic adaptive pressure and adhesive quantity control, and flushing routine fa.s.t. setting technology "Tool change in position" Long infeed guide with motorized adjustment Pre-milling unit for application before the gluing section Dodpfxj Aitf Uj Aarowd Fully automatic edge magazine for coil and strip material Glue application station GLU JET cartridges + PU adhesive, with sensing nozzle Workpiece height 8-60 mm High-gloss package Pressure unit, pneumatically controlled Trimming unit, pneumatically controlled for coil and strip material up to 8 mm edge thickness with pneumatic adjustment of 0-10° bevel of the trimming saw Multi-function milling unit FR301 MOT6, flush trimming 8 mm, radius milling – chamfer milling 15° via NC axes Profile milling unit FF301 MOT1 – rounding of corners up to edge thickness 3 mm or alternatively chamfer = 45°, working height 12 – 60 mm, postforming possible Scraping unit ZK301 MOT4, for chamfers and radii with 2 scraping blade carriers via NC axes Surface scraping unit FK701 with pre- and post-sensing - finishing Buffing unit - polishing Spray system in the infeed and outfeed area Spray system with lubricant for high-gloss edges Complete DIA tool set included First delivery 2022 Machine in TOP condition, taken out of service - small business Available from stock, Lieboch

Condition: used, mileage: 402,300 km, power: 231 kW (314.07 HP), first registration: 02/2003, fuel type: diesel, tire size: 295/80 R 22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro3, suspension: steel-air, total length: 6,000 mm, total width: 2,500 mm, Equipment: ABS, air conditioning, tachograph, = Additional Options and Accessories = - 4x2 - Air suspension - Mechanical tachograph - PTO (Power Take-Off) - Radio/CD player - Sleeper cab - Sun visor = Further Information = Front axle: Tire size: 295/80 R 22.5; Steered; Tire tread depth left: 50%; Tire tread depth right: 50%; Suspension: Leaf spring suspension Rear axle: Tire size: 315/80 R 22.5; Dual tires; Tire tread depth left inner: 90%; Tire tread depth left outer: 90%; Tire tread depth right inner: 90%; Tire tread depth right outer: 90%; Reduction: single reduction; Suspension: Air suspension Number of cylinders: 6 Unladen weight: 6,500 kg Payload: 12,100 kg GVW (Gross Vehicle Weight): 18,600 kg Damage: none Dwods Aitf Ropfx Aarjd License plate: BN-NL-77

Condition: used, mileage: 420,987 km, power: 240 kW (326.31 HP), first registration: 11/2008, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,100 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 3, total length: 9,050 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, Equipment: ABS, crane, electric window regulation, fog lights, trailer coupling, = Additional options and accessories = - Air horn - Gullet - Immobilizer - PTO Djdpfx Aae Aitdwsrjwd - Radio - Radio CD player - Speed limiter = Remarks = Crane Number of hydraulic extensions: 3 Mercedes Axor 1833, 2008, Euro 5, 421,000 km Manual transmission, Leaf-sprung, HMF 1500 K3, 3x Hydraulically extendable = More information = General information Year of construction: 2008 Registration number: BV-PN-99 Technical information Number of cylinders: 6 Engine capacity: 7.201 cc Axle configuration Suspension: leaf suspension Max. front axle load: 9000 kg Max. rear axle load: 11500 kg Weights Empty weight: 10.915 kg Carrying capacity: 9.750 kg GVW: 20.500 kg Max. towing weight: 44.000 kg Functional Crane: HMF 1500 K3, behind the cab Extendable superstructure: Yes Maintenance APK (MOT): tested until 08/2027 = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: used, Holz Her STREAMER 1057 CNC + PU Edge thickness 0.4 - 6 mm Modern control system with selector switch for adjusting the units Pre-milling unit for edge preparation before the gluing process Djdpfxs Aitdtj Aarjwd Fully automatic edge magazine for roll and strip material GLU-JET adhesive application station, cartridges + PU gluing Adhesive application using nozzle technology Workpiece height 6-60 mm Automatic adhesive height adjustment High-quality 3-roller pressure unit, 1st roller motorized Trimming unit, pneumatic, for roll and strip material up to 6 mm edge thickness With pneumatic adjustment of the trimming saw angle from 0-10° Milling unit, flush milling 6 mm, radius milling - chamfer milling - 15° Corner copying unit - 3 mm edge thickness Scraping unit for chamfers and radii with 2 scraping blade holders Surface scraping unit - for finishing Spray device - PU Machine with all processing tools Machine is WORKSHOP TESTED in TOP CONDITION

Condition: used, Year of construction: 2003, 3-Belt sanding machine with lacquer finishing and brush unit. 1st roller (steel), 2nd combination unit, 3rd shoe. TECHNICAL DATA: Max. working width 1350 mm Max. workpiece thickness 160 mm Min. workpiece thickness 3 mm Sanding belt dimensions 2150 x 1380 mm Sanding belt speed 18 m/s Feed rate - infinitely variable 3 - 18 m/min Motor power sanding unit 15 kW Motor power thickness adjustment 0.55 kW Motor power feed conveyor 2.2 kW Motor power brush unit 5.5 kW Operating pressure 6 bar Air consumption 30 l/min Dust extraction port - sanding unit 3 x 150 mm Machine width 2060 mm Machine depth 2660 mm Machine height 2100 mm Weight approx. 4200 kg Standard equipment: 1. Sanding belt: Contact roller 200 mm diameter, steel roller with grit compensation. Automatic feed via programming. 2. Sanding belt: Combination sanding unit with contact roller 150 mm diameter, 85 Shore hardness, height-adjustable with grit compensation. Electronically controlled membrane sanding shoe, segment width 27 mm, with automatic engagement and disengagement for high-quality veneer fine sanding. 3. Sanding belt: Electronically controlled membrane sanding shoe, with automatic engagement and disengagement, segment width 27 mm, for high-quality veneer and lacquer intermediate sanding. Reading system for the electronic sanding shoes, optical and therefore absolutely contactless! Lacquer intermediate sanding device consisting of: VT 13 vacuum table with perforated surface and vacuum generator 3.0 kW, B2 additional sanding belt speed for lacquer intermediate sanding, 4.5 m/sec on the 3rd sanding belt, BA 13 belt brush, oscillating, and workpiece-dependent, on the 3rd sanding belt (additional dust extraction 2 x 120 mm diameter), OS 13 satinizing brush unit, oscillating for perfect surface finish (dust extraction port 120 mm diameter), STR 13 texturing unit with 5.5 kW motor including texturing brush, automatically adjustable, AT 13 outfeed roller table 400 mm Dedpfs Aitdhsx Aarjwd Location: Supplier

Year of construction: 2019, condition: used, Description of the MobyLift TC The MobyLift TC is specifically designed for furniture manufacturers and interior fitters to lift wood panels from a stack or remove them from a shelf and place them on a table saw, a vertical or horizontal panel saw, or a CNC milling machine. The MobyLift is a handy tool for ergonomically lifting, transporting, and positioning all types of panels. From an operational standpoint, the MobyLift is a responsible choice: it is easy to use, reduces the number of damaged products, increases productivity, prevents back problems, and thus reduces potential work absences due to illness. Functionality of the MobyLift TC The base consists of a frame on which the counterweights, the 24V AGM battery system, and the lifting arm of the electric lifting and tilting system are located. The automatically operating vacuum device is mounted on the extension arm. A rotating and pivoting head allows the vacuum device to be manually rotated and pivoted into different positions. This head is equipped with a quick-locking system, which can block both the rotation and the pivoting, so that the products do not need to be held in place during transport. The automatically operating vacuum device consists of a frame and extendable arms, on which six stable suction cups are mounted. The vacuum system is located inside the vacuum device and maintains pressure automatically once it is switched on. The electric lifting and tilting system can be switched on using the wireless electric control. The TC is supplied with a 24 V battery charger for the electric lifting and tilting system and is equipped with a battery level indicator to continuously monitor the battery status. MobyLift TC-120-AM SL – short legs, suction cup – 1 pc. for airtight and porous materials, e.g. raw and coated chipboard, MDF, OSB, etc. Panel size max. 2100 x 3200 mm Overall height approx. 2050 mm Load capacity max. 120 kg Lifting height max. 1600 mm Tilting angle, front/rear 100° Swiveling angle on both sides 90° Rotating angle 360° Dwsds Aitddepfx Aarjd Width 800 mm Weight 175 kg Electric lifting/lowering Electric tilting Manual rotation Manual swiveling Conversion kit SL version to standard version 1 pc. Location: Supplier

Condition: used, Holz Her Sprint 1312 FÜ + PU Dwsdpfx Aao Aitdaerod Heavy-duty design – edge thickness 0.4 - 12 mm PLC screen control Pre-milling unit for application before the gluing section Fully automatic edge magazine for roll and strip material Glue application station for cartridges + PU bonding automatic tracing nozzle Workpiece height 6-55 mm End trimming unit for roll and strip material up to 12 mm edge thickness with adjustment from 0-10° angle of the trimming saws Milling unit, flush milling up to 12 mm, radius milling – bevel milling - 15° motorised - 4 axes Scraper unit for bevels and radii with 2 pneumatically operated scraper holders pneumatic infeed and outfeed Flat scraper unit – finishing Spray device – PU Machine in TOP CONDITION Available from stock Lieboch

Condition: used, Year of construction: 2011, Sliding carriage: 3000 mm Cutting width: 1300 mm CNC stop Motor: 5.5 kW Saw blade diameter: max. 500 mm Dwjdpfx Aaj Aitc Sjrjd 2-axis scoring unit LED lighting Scoring unit control panel at eye level, swiveling Front table, swiveling Template holder Table extension 840 mm Angle/miter stop Location: Supplier

Condition: used, Year of construction: 2011, Number of units: 2 R = Calibrating unit with a profiled steel contact roller (160 mm diameter) C = Combination unit with a profiled, rubber-coated contact roller, 65° Shore (160 mm diameter), and an electronic segmented pressure bar with a 35 mm segment width. Working width: 1100 mm Sanding belt width: 1120 mm Sanding belt length: 1900 mm Workpiece thickness: 3 - 160 mm Drive motors: 1st unit: 15 kW 2nd unit: 11 kW Cutting speed: 21 / 12 m/s Dwjdpfx Aj Aitc Isarod Feed motor: 1.1 kW Feed speed: 2.5 - 13 m/min Compressed air: 6 bar Compressed air consumption: max. 20 l/min Belt blowing device: 440 l/min per device Extraction capacity: approx. 2880 m³/h Air velocity: 20 m/sec Dimensions: 1850 x 1700 x 1900 mm Total connected load: 28 kW Weight: 1800 kg Storage location: Supplier

Condition: used, Year of construction: 1992, Planing width: 630 mm Planing height: 2 - 250 mm Cutting depth: 8 mm Length of the thicknessing table: 1100 mm Speed of the cutter shaft: 5000 rpm Electric thicknessing table adjustment with digital display 4 feed speeds: 6, 9, 12, 18 m/min Motor: 5.5 kW Two-knife cutter shaft Dust extraction port: 160 mm diameter Dimensions: 1115 x 1160 x 1160 mm Weight: approx. 1050 kg Djdpfx Aae Aitc Djrowd Location: Supplier

Condition: used, Year of construction: 1992, Working width: 530 mm Dsdpfx Aae Aitcyjrswd Maximum bending depth = folding depth: 16 mm Speed: 5000 rpm Knife shaft diameter: 125 mm Motor: 5.5 kW Dust extraction connection diameter: 160 mm Dimensions: 2840 x 1300 x 1100 mm Weight: approx. 970 kg Location: Supplier

Condition: used, Year of construction: 2018, Main spindle: 12 kW / HSKF63 (S6) Drilling head: DH17/DH25 Dwodpfs Aitcvjx Aarod Dimensions: 2400 x 2100 x 2257 mm Weight: 1950 kg Location: Supplier

Year of construction: 2024, condition: excellent (used), Fully automatic tote bin cleaner machine. Djdpfe Aitcrox Aarswd

Condition: used, Height adjustment range: 550 - 1150 mm. Maximum load: 350 kg. Work surface: 2000 x 1015 x 30 mm. Vacuum suction cups: 1x round, 190 mm diameter / 1x oblong, 250 x 80 mm / 1x oblong, 240 x 45 mm (90° swivel axis). Djdpfx Aae Aitcnerjwd Storage location: Supplier.

Condition: used, Year of construction: 2006, overall weight: 16,000 kg, maximum load weight: 12,400 kg, empty load weight: 3,600 kg, loading space width: 2,460 mm, loading space length: 7,200 mm, loading space height: 2,400 mm, Equipment: cooling unit, GERMAN DEALER offers: Schmitz BDF refrigerated box trailer Carrier 850 unit in working order new battery Dsdo Aitckepfx Aarswd 2 rows for locking bars skirt board 16,000 kg GVWR 3,600 kg unladen weight Year of manufacture: 05/2006 Interior dimensions: 7200x2460x2400 mm Many swap bodies and chassis are in stock! ##### DELIVERY IS POSSIBLE THROUGHOUT GERMANY! MEPO COMMERCIAL VEHICLES HAS BEEN PROVIDING VEHICLES SINCE 1983! VIEWING BY APPOINTMENT ONLY! #####

Condition: used, empty load weight: 2,280 kg, maximum load weight: 13,720 kg, overall weight: 16,000 kg, loading space length: 7,300 mm, loading space width: 2,420 mm, loading space height: 800 mm, Year of construction: 2016, GERMAN DEALER offers: BDF construction platform, 7.45m Frame, 150 mm high Upright hole strip Aluminum side walls, 800mm Aluminum front wall, 2000mm Side wall doors Suitable for crane loading Telescopic support legs Year of manufacture: 09/2016 16,000 kg gross vehicle weight Dwedps Aitcgofx Aarjd 2,280 kg unladen weight Interior dimensions: 7300x2420x800 mm Multiple units available Many interchangeable platforms and chassis in stock! ##### PLEASE CALL - NO EMAILS! ##### DELIVERY POSSIBLE THROUGHOUT GERMANY! MEPO COMMERCIAL VEHICLES HAS BEEN PROVIDING SOLUTIONS SINCE 1983! VIEWING ONLY BY APPOINTMENT! #####

Condition: used, Hebrock K34 Dwodpfx Aj Aitb Ujarsd Edge thickness up to 8mm PLC-based control system with 15" touchscreen Pre-milling unit for attaching before the gluing section (3mm) Gluing station with interchangeable containers and glue dispensing system Edge height max. 60 mm Cutting unit Milling unit for flush trimming/radiusing/chamfering Corner rounding unit for radii/chamfers Multi-radius pull blade (R1/R2) Nesting Surface pull blade Release agent spraying system Year of manufacture 2023, 52 operating hours Machine is in NEW CONDITION and in TOP SHAPE From a carpentry shop closing down/due to retirement Available from a carpentry shop

Condition: used, Year of construction: 2015, overall weight: 16,000 kg, maximum load weight: 13,380 kg, empty load weight: 2,620 kg, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,780 mm, GERMAN DEALER offers: 7.45m BDF interchangeable platform Sliding tarpaulin Sliding curtain Dwedpfs Aitbbjx Aared Multilock outer frame Lashing points Suitable for crane loading Aluminum slats 2 new telescopic support legs 16,000 kg gross vehicle weight 2,620 kg unladen weight Year of manufacture: 04/2015 Interior dimensions: 7300x2480x2780 mm Many interchangeable platforms and trailers in stock! ##### PLEASE CALL - NO EMAILS! ##### DELIVERY POSSIBLE THROUGHOUT GERMANY! MEPO COMMERCIAL VEHICLES HAS BEEN PROVIDING VEHICLES SINCE 1983! VIEWING BY APPOINTMENT ONLY! #####