Zalan Zrupko

Condition: excellent (used), functionality: fully functional, Year of construction: 1990, - *Brand: FAMAR S.N.C. Officine Meccaniche - ALBIATE (MI) Italy* - *MODEL: A311 - 15/4* - *SERIES No. 571 - YEAR 1990* - Compliance: MAY 1990 - Art. R.233-69 of the Labor Code (French plate) Blsdez E R Auopfx Aknjn - Type: Asymmetrical 3-roll bending machine *Features:* - Usable length: *1500 mm* (15 = 15 decimeters) - Thickness: *4 mm max in steel* (15/4 = 1500 x 4) - Rolls Ø ~ 110-120mm, hardened steel - Motorized: rear green motor as seen, 2.2kW - Control: remote control panel *FORWARD / REVERSE + UP / DOWN* (lower roll adjustable) - Weight: *~ 1,250 kg*

Condition: used, Year of construction: 1991, total length: 4,700 mm, total width: 1,200 mm, total height: 1,400 mm, Colour: Green Empty weight: 7.500 kg Price: On request - Year: 1991 - Documentation available: No - CE certificate present: No - Serial number: 914931 - Drive system: Conventional - Drive: Hydraulic - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 3 - Power [kW]: 5.5 - Max. sheet thickness [mm]: 14 - Max. prebending thickness [mm]: 6 - Max. working width [mm]: 3000 - Top roll diameter [mm]: 255 - Bottom roll diameter [mm]: 255 - Options: Cone rolling - Transport dimensions: 4700mm x 1200mm x 1400mm (l x w x h) - Transport weight [kg]: 7500kg - Transport packages [pcs.]: 1 Blsdpjz Euawofx Aknon Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2026, sheet width 3100 mm plate thickness 9 mm pre-bending 6 mm diameter of upper rolls 220 mm diameter of lower rolls 200 mm side roll diameter 170 mm min. dia. 250 mm roll speed 6 m/min total power requirement 10,3 kW weight of the machine ca. 4651 kg dimensions of the machine ca. 4915 x 1120 x 1235 mm Features - Machines include the following DAVI standard specification: The components of the machine structure Bodpfx Aez Dxpmsknjln (machine stand, frame and swivel bearings, etc.) have been calculated and designed to withstand the loads required for the applications and performance levels. The robust and heavy-duty machine construction absorbs the loads generated during the bending process without transferring them to the foundation. - High-quality surface finish: For forming delicate surfaces and/or soft materials without leaving marks Hydraulic-mechanical parallelism system, supported by electronics for fine-tuning. There are two INDEPENDENT & SYMMETRICAL hydraulic circuits for the left and right cylinders of each roller. The oil flow is regulated by two DOUBLE PUMPS, which are mounted on the same motor shaft and are fully synchronised. The two symmetrical hydraulic circuits move the cylinders and supply the rollers with the SAME amount of oil in a fully synchronised manner. Electronic control is activated only for extremely precise fine-tuning. - Smooth transmission of the drive Both the hydraulic motors and the gearboxes (top and bottom) can follow the deflection of the roll without load when bending narrow sheets. This ensures perfectly symmetrical deflection of the rolls under load. This system also allows the rollers to deflect freely, without the risk of breakage under excessive load. - ‘Roll-by-Wire’© digital technology Since 2004, DAVI has revolutionised the way sheet metal rollers are wired (similar to ‘fly-by-wire’ technology in the aerospace, FMS and automotive industries) and introduced ‘Roll-by-Wire’ technology. This allows the entire control system of the roller to be controlled via digital signals rather than, as was previously the case, via numerous relays and contacts. Digital technology is much faster and more reliable. Action Benefit Reduction in the number -> Reduction in potential of components component failures Very compact design -> Improved accessibility for maintenance work Improved accessibility for -> Damaged parts can be identified maintenance work more easily More reliable -> Greater accuracy thanks to the use of ‘digital signals’ Permanent lubrication technology The lever-arm feed system eliminates all linear friction during the movement of the side rollers, as the roller support arms, which house the bushings, rotate simply and smoothly around two large, strong pivot points made of alloy steel, ensuring precise and friction-free rotation. This guarantees reduced wear and safety during unlimited use. Further advantages of the lubrication-free lever-arm feed mechanism are: •NO daily maintenance required (lower operating costs). •More production time available. •The bearings are sealed to protect against scale, dust and rust - Hardened rollers •Excellent heat tre...

Condition: good (used), Year of construction: 1989, sheet width 2050 mm plate thickness 8.0 mm pre-bending capacity 6.0 mm upper roll diameter 190 mm lower roll diameter 180 mm bending speed 5.2 m/min work height max. ca. 980 mm Bedpfxjz Dkzho Akneln total power requirement 5.5 kW weight of the machine ca. 3500 kg. range L-W-H 2900 x 1200 x 1280 mm Furnishing: - Robust electro-hydraulic 3-roller bending machine - planetary movement of the bending rollers with reduced center distance - Hydraulic motors combined with planetary gears * for driving the 3 rollers - mobile operating unit, with connection cable + plug - extended roll ends for profile bending rolls - with conical bending device * Inclination of the side rollers by handwheels * Workpiece limitation for a cone with a 45° pitch: * Working length max: 60% * Bending capacity max: 50% - free-moving operation * electric delivery rollers * electric turning/rolling movement * digital position display of the reels - hardened rollers SAE 1050 CK 45 - Hydraulic folding store for removing closed pipes - safety device (cable) - Original instruction manual + CE declaration * Machine link : ?machineno=1008-9401255

Condition: used, total length: 4,100 mm, total width: 1,400 mm, total height: 130 mm, Colour: Grey Empty weight: 3.000 kg Bledez Avg Nspfx Aknsn Price: On request - Documentation available: No - CE certificate present: No - Drive system: Conventional - Drive: Mechanical - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 2 - Max. sheet thickness [mm]: 8 - Max. working width [mm]: 2540 - Top roll diameter [mm]: 220 - Bottom roll diameter [mm]: 220 - Transport dimensions: 4100mm x 1400mm x 135mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1974, total length: 4,700 mm, total width: 1,800 mm, total height: 1,700 mm, Colour: Green Empty weight: 6.500 kg Price: On request - Year: 1974 - Documentation available: No - CE certificate present: No - Serial number: 1361 - Drive system: Conventional - Drive: Hydraulic - Number of rolls [pcs.]: 4 - Number of driven rolls [pcs]: 2 Blodpfxsz Avbaj Aknon - Max. sheet thickness [mm]: 8 - Max. prebending thickness [mm]: 3 - Max. working width [mm]: 2000 - Top roll diameter [mm]: 200 - Bottom roll diameter [mm]: 160 - Transport dimensions: 4700mm x 1800mm x 1700mm (l x w x h) - Transport weight [kg]: 6500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1980, operating hours: 15,034 h, total length: 7,700 mm, total width: 2,300 mm, total height: 1,700 mm, Colour: Green Empty weight: 10.000 kg Price: On request - Year: 1980 - Documentation available: No - CE certificate present: No - Serial number: 1500 - Operating hours: 15034 - Drive system: Conventional - Drive: Hydraulic - Number of rolls [pcs.]: 4 - Number of driven rolls [pcs]: 2 - Power [kW]: 6.0 - Max. sheet thickness [mm]: 8 - Max. prebending thickness [mm]: 8 - Max. working width [mm]: 3000 - Top roll diameter [mm]: 300 Bjdpfxozzwpcs Akneln - Bottom roll diameter [mm]: 220 - Options: Cone rolling, Plate support - Transport dimensions: 7700mm x 2300mm x 1700mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: SY 330 -075, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Akyapak, number of rollers: 4, roller (bottom) diameter: 300 mm, roller (top) diameter: 330 mm, overall weight: 9,100 kg, total length: 4,585 mm, total width: 1,610 mm, total height: 1,840 mm, input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, foot remote control, hardened rollers, The sale includes a 2-meter longitudinal welding station equipped with an Oerlikon MIG 500 A welding unit, with all equipment in full working order. Bledpfx Akezzdahenen Also included are a lifting table for material handling to the plate rolling machine and a work platform. The plate rolling machine is in good condition and can be put into production immediately. The machine is currently operational, and inspection and test runs can be arranged upon request. With the inclusion of the longitudinal welding station, this package provides a complete solution for manufacturing tubes and special pipe sections to customer-specified diameters, with lengths of up to 2 meters.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2004, roller (bottom) diameter: 140 mm, roller (top) diameter: 140 mm, working width: 1,500 mm, sheet thickness (max.): 5 mm, overall weight: 1,200 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of rollers: 3 Number of driven rollers: 2 Max. sheet thickness: 5 mm Max. working width: 1,500 mm Diameter of top roller: 140 mm Diameter of bottom rollers: 140 mm MACHINE DETAILS Bjdezza U Ujpfx Aknjln Drive: Hydraulic Control: Conventional Power: 3 kW Dimensions & Weight Dimensions (L x W x H): 2,900 x 900 x 1,400 mm Unladen weight: 1,200 kg Transport packages: 1 EQUIPMENT CE marking

Condition: good (used), functionality: fully functional, Year of construction: 2004, machine/vehicle number: 4roll 2000x6 mm, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 155 mm, roller (top) diameter: 165 mm, side roll diameter: 120 mm, roller diameter: 165 mm, roller length: 2,050 mm, working width: 2,000 mm, working height: 600 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, overall weight: 2,200 kg, total length: 3,400 mm, total width: 1,150 mm, total height: 1,100 mm, power: 2.21 kW (3.00 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, emergency stop, hardened rollers, -roll 2000x6 mm plate bending machine Davi model MAX2017 year 2004 used plate roll in working condition, Planetary dual pre-pinch Performance Capacity: Plate width 2000 mm plate thickness 6 mm pre-bend 5 mm minimum rolling diameter ID 350 mm rollers length 2050 mm Bledjzy N Afjpfx Aknjn Upper roll 165 mm Pinch roll 155 mm Side rolls 120 mm Power electric motor 3 kw on hydraulic unit Vac 400/50 mm Installed configuration Rollers surface hardened high strength Conical plate rolling, cone bending Hydraulic commands via leverage distributors Infinitely variable speed control Digital position readout --- Hydraulic driven motorized the central rolls Pre-pinch pressure adjustable for pre-bend Drop-end front open to unload closed shells Re-rolling system for calibration of welded shell Safety and emergency stop machine dimension 3400x1150xH 1100 mm -weight 2200kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, machine/vehicle number: plate roll Faccin, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 180 mm, roller (top) diameter: 200 mm, side roll diameter: 160 mm, roller diameter: 200 mm, roller length: 2,050 mm, working width: 2,000 mm, working height: 700 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 12 mm, overall weight: 3,700 kg, total length: 3,500 mm, total width: 1,100 mm, total height: 1,000 mm, power: 5.52 kW (7.51 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 3, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, PLATE BENDING MACHINE FACCIN - 4 ROLL HYDRAULIC 2000 X 8 MM MODEL 2020B4 year 2020 capacity 2000x8 mm Plate roll hydraulic linear guideways Machine in excellent working condition Bending capacity -Plate width : 2000 mm -Rolling plate thickness 8 mm - Prebend thickness 6 mm Rolls dimensions: -Useful length 2050 mm -Upper roll 200 mm -Lower roll 180 mm -Side rolls 160 mm Electric motor 5,5Kw Vac 400/50 • Hardening of the 4 rolls high strength surface • Central rolls driven with hydraulic motors and gear units • Conical bending attachment side rolls tiltable to form cones • Opening front hydraulic drop-end to unload the closed shell. Blodpfjzy Nv Eex Aknon • Variable speed working roll bending rotation hydraulic speed fast/slow. • Console electric on wheels with centralized commands joysticks and 3 digital readout. • Digital readouts of the rolls position bending and pre-bending repeatability. • Dimension 3500 x1100 x H 1000 mm - weight 3700kgs

Condition: used, Year of construction: 2004, total length: 2,900 mm, total width: 900 mm, total height: 1,400 mm, Colour: Grey Empty weight: 1.200 kg - Year: 2004 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Drive system: Conventional - Drive: Hydraulic - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 2 - Power [kW]: 3.0 - Max. sheet thickness [mm]: 5 - Max. working width [mm]: 1500 - Top roll diameter [mm]: 140 - Bottom roll diameter [mm]: 140 - Options: Cone rolling, Digital readout, Profile bending attachment - Transport dimensions: 2900mm x 900mm x 1400mm (l x w x h) - Transport weight [kg]: 1200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bljdpfszxhygex Aknsn Lukas van Rossum

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: 600007090, roller (bottom) diameter: 280 mm, roller (top) diameter: 280 mm, working width: 3,100 mm, sheet thickness (max.): 13 mm, power: 15 kW (20.39 HP), TECHNICAL DETAILS Number of rollers: 4 Number of driven rollers: 2 Diameter of upper roller: 280 mm Diameter of lower rollers: 280 mm Max. sheet thickness: 13 mm Max. pre-bending thickness: 10 mm Max. working width: 3,100 mm Bending speed: 5,000 mm/min Drive: Hydraulic Control: Conventional Power: 15 kW MACHINE DETAILS Bledpfxozxdk Ij Aknen Dimensions & Weight Dimensions (L x W x H): 5,810 x 1,980 x 1,540 mm Weight: 11,500 kg Transport packages: 2 EQUIPMENT CE marking

Condition: used, Year of construction: 2007, total length: 5,810 mm, total width: 1,980 mm, total height: 1,540 mm, Colour: Blue Empty weight: 11.500 kg Price: On request - Year: 2007 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 600007090 - Drive system: Conventional - Drive: Hydraulic - Number of rolls [pcs.]: 4 - Number of driven rolls [pcs]: 2 - Power [kW]: 15.0 - Max. sheet thickness [mm]: 13 - Max. prebending thickness [mm]: 10 - Max. working width [mm]: 3100 - Top roll diameter [mm]: 280 - Bottom roll diameter [mm]: 280 - Bending speed [mm/min]: 5000 Bledpfx Aozw A Sujknon - Options: Cone rolling, Digital readout - Transport dimensions: 5815mm x 1985mm x 1540mm (l x w x h) - Transport weight [kg]: 11500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, functionality: fully functional, Year of construction: 1997, machine/vehicle number: 9730010, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 340 mm, side roll diameter: 300 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 25 mm, sheet thickness brass (max.): 25 mm, sheet thickness copper (max.): 25 mm, overall weight: 9,000 kg, total length: 5,500 mm, total width: 1,600 mm, total height: 1,500 mm, input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 3-roll hydraulic plate bending machine with pre-pinch Bsdpfxszwuu Ue Akneln Model MCO3034 Davi capacity 3000x20 mm -Plate width 3000 mm -Capacity rolling 20 mm -Prebend 16 mm ----- TECHNICAL DATA Top roll 340 mm Surface on the rolls 3050 mm MINIMUM ROLLING DIAMETER ID 430 MM depending on plate thickness and plate yield strength CONFIGURATION: -Rolls hardened high strength surface -Conical plate bending attachment hydraulic -Digital position readouts 2xplate support left and right side hydraulic ( see photo ) -3 rolls driven hydraulic powered with individual motor & gear box on each roll. -Parallelism between top and bottom rollers by torsion bar. -Rolls installed on bearings -Overload safety hydraulic protection of the rolls -Synchronized speed hydraulic rotation of the rolls. -Hydraulic unit self enclosed into the machine. -Speed infinitely variable control with leverage hydraulic distributor -Centralized operator control panel hinged on the front floating left right -Emergency shutdown and safety stop system -Manuals original

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, machine/vehicle number: 19142, roller (bottom) diameter: 140 mm, roller (top) diameter: 120 mm, working width: 1,250 mm, sheet thickness (max.): 6 mm, TECHNICAL DETAILS Max. sheet thickness: 6 mm Bodpfxszuwwao Aknsln Max. pre-bending thickness: 4 mm Max. working width: 1,250 mm Number of rollers: 4 pcs. Number of driven rollers: 2 pcs. Diameter of upper roller: 120 mm Diameter of lower rollers: 140 mm MACHINE DETAILS Control system: CNC Drive: Hydraulic Power: 4 kW Dimensions & Weight Unladen weight: 1,450 kg Dimensions (L x W x H): 2,700 x 1,450 x 1,500 mm Transport weight: 1,450 kg Number of transport packages: 1 pc. EQUIPMENT CE marking Documentation

Condition: used, Year of construction: 2017, controller model: NEXUS, _____ Description: Year of manuf. : 2017 Material thickness : 14 mm Technical data Working length:3,100 mm Bending capacity / Folding capacity:14 / 12 mm Upper roll diameter:290 mm Lower roll diameter:270 mm Side roll diameter:210 mm Main motor power:7.5 kW Machine length:4,475 mm Machine width:1,460 mm Machine height:1,520 mm Machine weight:8,000 kg Control system:NEXUS TouchScreen DNC equipment :- NEXUS DNC control system with touchscreen interface :Programming and operation options: :1. Manual mode – all movements controlled via joystick :2. Teach-in mode – saving of positions :3. Input of values for the rollers via the screen :Storage capacity for 300 programmes : Blodpfx Aozuikxsknsn :- Rollers made from C45 alloy steel, induction-hardened :to 50–55 HRC : :- Conical bending unit with both :side rollers set at an angle, lower roller set at an angle and :bearing with hardened guide roller : :- Calibration unit for re-rounding :welded tubes : :- Brake for the upper roller for greater precision when :positioning the material.

Condition: used, Year of construction: 1999, sheet width 2050 mm Bsdpfx Akjztfxionjln plate thickness 4 mm total power requirement 3 kW weight of the machine ca. 2 t

Condition: used, Year of construction: 2003, total length: 3,230 mm, total width: 1,150 mm, total height: 1,120 mm, Colour: Grey Empty weight: 1.400 kg Price: On request - Year: 2003 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 220281 - Drive system: Conventional - Drive: Mechanical - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 3 - Power [kW]: 2.2 - Max. sheet thickness [mm]: 2 - Max. prebending thickness [mm]: 2 - Max. working width [mm]: 2050 - Top roll diameter [mm]: 110 - Bottom roll diameter [mm]: 110 - Bending speed [mm/min]: 3 - Transport dimensions: 3230mm x 1150mm x 1120mm (l x w x h) - Transport weight [kg]: 1400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Bjdpfezry N Hex Akneln VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, actuation type: hydraulic, controller manufacturer: Siemens, controller model: Smart Line, number of rollers: 4, roller (bottom) diameter: 190 mm, roller (top) diameter: 210 mm, side roll diameter: 180 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, power: 11 kW (14.96 HP), input voltage: 400 V, number of digital displays: 1, warranty duration: 12 months, Equipment: documentation/manual, emergency stop, DIGIMA W12-8x3200 Hydraulic Four-Roll CNC Plate Rolling Machine The DIGIMA W12-8x3200 is a hydraulic four-roll CNC plate rolling machine designed for accurate, repeatable and efficient sheet-metal forming. With a working width of 3200 mm, it is suitable for producing large cylindrical parts, sleeves, pipes, curved sections, housings, tanks and other technical components used in metalworking, steel construction, ventilation, machinery manufacturing and industrial production. The four-roll system provides a major advantage over conventional three-roll machines. The sheet is held securely between the upper and lower rolls, while the two side rolls perform the pre-bending and rolling operations. This arrangement allows both edges of the sheet to be pre-bent without removing and turning the workpiece, reducing handling time and limiting the length of straight sections left at the ends. The result is improved repeatability, higher productivity and more consistent part geometry. The W12-8x3200 can roll sheet metal up to 8 mm thick and perform pre-bending up to 6 mm. Its 3200 mm working length enables the processing of wide sheets for both one-off jobs and series production. The upper roll has a diameter of 210 mm, the lower roll 190 mm, and the side rolls 180 mm. The minimum rolling diameter is 400 mm, allowing the machine to produce a wide range of cylindrical and curved components. The hydraulic drive ensures smooth, stable movement and reliable clamping force throughout the forming process. The 11 kW motor provides the power required for regular industrial operation, while the rolling speed of 4 m/min supports efficient production without compromising process control. The rigid machine body and carefully arranged roll system help guide the material accurately and reduce unwanted deformation. Computerised CNC control makes the machine convenient to set up and operate. The operator can control roll movements, monitor the forming process and reproduce previously established settings for recurring jobs. This is especially useful in batch production, where the same diameter, radius and dimensions must be achieved repeatedly. The control panel also helps reduce setup time and simplifies everyday machine operation. Blodsznw T Uepfx Aknsn The operating sequence is straightforward. First, the sheet is inserted and stabilised between the rolls. The side rolls then pre-bend the sheet edges, minimising flat ends. Finally, the material is passed through the roll system until the required tube, sleeve, arc or cylindrical shape is obtained. The machine can also be used for forming conical components by applying a controlled inclination of the rolls. Thanks to its wide working capacity and computer-controlled operation, the machine can be used in flexible workshop production as well as organised manufacturing processes. It is suitable for companies producing ventilation ducts, structural elements, machine covers, tanks, steel sleeves and custom-made components. Repeatable CNC settings are particularly valuable when several identical parts must be formed with the same diameter and curvature.

Condition: used, Year of construction: 2005, total length: 7,800 mm, total width: 1,700 mm, total height: 1,580 mm, Colour: Green Empty weight: 11.000 kg Price: On request - Year: 2005 - Documentation available: No - CE certificate present: No - Drive system: Conventional Bsdpfx Akszkkrvensln - Drive: Hydraulic - Number of rolls [pcs.]: 4 - Number of driven rolls [pcs]: 2 - Max. sheet thickness [mm]: 12 - Max. prebending thickness [mm]: 10 - Max. working width [mm]: 2500 - Top roll diameter [mm]: 360 - Bottom roll diameter [mm]: 300 - Transport dimensions: 7800mm x 1700mm x 1580mm (l x w x h) - Transport weight [kg]: 11000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), functionality: fully functional, Year of construction: 2015, Four-Roller Plate Rolling Machine Manufacturer: FACCIN Model: 4HEL 2122 Year: 2015 Blsdpjzguumjfx Aknon Technical Specifications Brand: FACCIN Model: 4HEL 2122 Year of manufacture: 2015 Working width: 2050 mm Roll geometry: Linear guides Top roll diameter: 225 mm Bottom roll diameter: 210 mm Side roll diameter: 165 mm Bending force against top roll: 100 t Motor power: 9 kW Dimensions (approx.): L 3.50 x W 1.20 x H 1.10 m Weight (approx.): 4,200 kg Performance Rolling capacity (full working width): 12 mm Pre-bending capacity (full working width): 8 mm From tube diameter: 1,125 mm With yield strength: 260 N/mm² Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From tube diameter: 295 mm With yield strength: 260 N/mm² Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From tube diameter: 1,125 mm With yield strength: 360 N/mm² Rolling capacity (full working width): 6.5 mm Pre-bending capacity (full working width): 5 mm From tube diameter: 295 mm With yield strength: 360 N/mm² Rolling capacity (half working width): 15 mm Pre-bending capacity (half working width): 10 mm From tube diameter: 1,125 mm With yield strength: 260 N/mm² Equipment - Double linear guide system for roller movement - Extra wide bearing blocks - MCS double bearing system for roll rotation - Extra heavy-duty, doubly supported drop end bearing - Electronic parallelism system (EPS) - Hardened rolls for maximum wear protection and reduced sheet damage - All rolls polished after heat treatment - SIEMENS S7 PLC touch control - Safety cable with emergency stop and CE certification - Water cooler for hydraulic unit All details without guarantee. A live demonstration under power is possible at any time in our showroom.

Condition: used, functionality: fully functional, Year of construction: 2000, control type: CNC control, roller (bottom) diameter: 210 mm, roller (top) diameter: 205 mm, side roll diameter: 170 mm, roller length: 1,100 mm, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 8 mm, power: 5.5 kW (7.48 HP), Equipment: cone bending device, emergency stop, hardened rollers, 4 – Roll bending machine Manufacturer: STÖLTING, Type: VB 322 Blsdpfx Akszgf Rxsnsn Year of manufacture: 2000 Technical data Manufacturer: STÖLTING Type: VB 322 Year of manufacture: 2000 Bending length: 1100 mm Sheet thickness: 12 mm Bending allowance: 8 mm Upper roll diameter: 205 mm Lower roll diameter: 210 mm Side roll diameter: 169 mm Main motor: 5.5 kW Weight: approx. 3200 kg Equipment • CNC control • Conical bending device • Operating manual All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: excellent (used), Technical specifications: Retrofit in 2026 Working length: 2550 mm Max. bending capacity: 6.0 mm Bending allowance: 4.0 mm Blodpfjzbcwmox Aknon Diameter of upper roller: 200 mm Diameter of lower roller: 180 mm Hydraulic folding bearing Taper bending device Control panel with digital display Motor power: 5.5 kW Dimensions (length x width x height): approx. 3600 x 1150 x 1250 mm Weight: approx. 4.5 tons Condition: Very good, retrofit in 2026 The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Siemens, controller model: PLC, number of rollers: 4, roller (bottom) diameter: 190 mm, roller (top) diameter: 210 mm, side roll diameter: 170 mm, roller diameter: 210 mm, roller length: 2,050 mm, working width: 2,000 mm, roller height adjustment: 700 mm, working height: 700 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 5 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 15 mm, sheet thickness copper (max.): 15 mm, overall weight: 5,000 kg, total length: 4,600 mm, total width: 1,400 mm, total height: 1,700 mm, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, number of digital displays: 1, warranty duration: 24 months, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, W12-8X2000 Four-roller Plate Rolling Machine This machine is equipped with plate end pre-bending and CNC rolling functions. It allows the metal plate to be fed in one single pass, completing pre-bending and roll forming of the workpiece without the need for turning over the plate. Bodpfey Ugtajx Akneln The upper working roller serves as the main drive roller, while the lower roller and two side rollers are hydraulically driven. Their lifting strokes are controlled by the CNC system, enabling automatic leveling with a synchronous display accuracy of ±0.1 mm. The tilting and resetting of the tilting bearing housing adopts a hydraulic transmission structure, and the upper roller is equipped with a balancing mechanism to facilitate the removal of the finished workpiece. The machine comes with a movable independent control console for flexible repositioning at any time, and is equipped with safety interlock devices to ensure safe and reliable operation. Working Roll Material The working rolls are made of 42CrMo high-strength premium alloy steel, manufactured through forging, rough machining, and quenching & tempering heat treatment, achieving a bulk hardness of HB 240–300. After finish machining, they undergo medium-frequency induction hardening, resulting in a surface hardness of HRC 47–58. The products comply with the JB/ZG4289-86 standard for roll steel, ensuring uniform roll rigidity with a controlled deflection of (1/700–1/1000)L. Note: L refers to the center distance between the two side frames. The entire production process strictly follows the standard manufacturing flow for rolls, fully guaranteeing the comprehensive mechanical properties of the working rolls. Working Roll Rotation & Drive System The upper roll is the driving roll of the four-roller rolling machine. It is fitted with an independent hydraulic motor directly coupled to the heavy-duty gear housing, with no intermediate gear transmission. This is the most energy-efficient drive design. The hydraulic motor is equipped with an instant braking device, enabling accurate positioning of the roll shaft during pre-bending operations. Double-row spherical roller bearing Excellent Self-aligning Performance The outer ring adopts a spherical structure, allowing the inner ring and roller assembly to deflect within an angle of 1.5°~3°. It can automatically compensate for misalignment caused by installation errors and shaft deflection, preventing seizure and abnormal wear. Heavy Load & Impact Resistance Line contact between rollers and raceways enables the bearing to withstand extremely high radial loads as well as bidirectional axial loads, perfectly suited for heavy-duty working conditions of rolling machine rolls. High Durability Made of high-strength bearing steel with quenching and other heat treatments. Combined with a well-designed lubrication system, it ensures long-term stable operation under harsh conditions and greatly reduces downtime for maintenance.