Schreinerei

Condition: used, Year of construction: 2002, for coils and strip material from 0.4 - 15 mm max./min. board thickness 60/6 mm max. edge overhang 66 mm large magazine table, D = 820 mm transport chain with automatic lubrication blocking roller for shortest workpiece sequence safety/noise protection hoods central dust extraction connection, D = 160 mm, join milling cutters, D = 120 mm chip collection box, D = 100 mm equipped with: > Join milling cutters 1961 incl. DIA tools > memory-programmable screen control unit SPK 18000 (color screen) > Automatic edge magazine 1901 for coils and strip material > Glue station 1906 for cartridges + granules, including sensing nozzle > Pressing unit 1926, motor-driven > Saw hoods 1918 > Edge trimming unit 1920 > Radius cutter 1929 incl. chip collection box, pneumatic adjustment (separate for top and bottom) > Profile milling unit 1934 for longitudinal processing and corner copying (bottom + front edge) > Profile milling unit 1933 for longitudinal processing and corner copying (top + rear edge) > Flat cutter 1964, controlled by the application > Deburring unit 1944, incl. immersion control > Spraying device 1856 at the infeed and outfeed > Feed rate 12/16 m/min > Motor-driven bridge adjustment > Infeed guide, motor-driven Length 7600 mm Width 1300 mm Height 2000 mm Godpfsz Abppox Acmskb Weight 2800 kg

Condition: used, Year of construction: 2006, functionality: fully functional, type of input current: three-phase, edge thickness (max.): 15 mm, height adjustment type: pneumatic, feed rate X-axis: 18 m/min, total length: 6,500 mm, Brand: HOLZ-HER Model: SPRINT 1321 Year: 2006 Control: HOLZ-HER EDGECONTROL PPC 221 Type: Automatic edge banding machine Power supply: three-phase Construction: heavy-duty industrial machine Length: approximately 6.5 m Pre-milling / trimming unit Automatic edge coil magazine and feeder Gluing unit Edge pressure system Pressure rollers Front and rear trimming unit Top and bottom milling units Finishing milling unit Edge rounding unit / corner rounding Profile scraper Glue scraper Finishing units Brushes / polishing Pneumatic adjustments Dust extraction system for the various units The SPRINT 1321 can process edge banding in coils up to approximately 3 mm thick and, depending on the configuration, thick edge banding up to approximately 15 mm. The minimum panel dimensions are typically around 60 mm in width and 180 mm in length, with a feed rate of up to approximately 12.5 to 18 m/min, depending on the configuration. Control system The machine is equipped with the HOLZ-HER EDGECONTROL PPC 221 control system, which allows for the programming and management of the various working units. This machine is particularly suitable for: Furniture manufacturers Industrial carpentry shops Panel workshops Kitchen manufacturers Furniture manufacturers Gkodpezz Txasfx Acmeb Workshops looking to transition to automated production Spare parts / second machine Sale The machine is sold in its current condition. On-site testing is possible, subject to power-up and operating conditions. Additional photos, videos, and technical information can be provided upon request. Price: €11,900 (excluding VAT) Machine can be viewed by appointment.

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) max mm 1,0 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 (266) / 3300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Hogging Units (2 x Kw 6,6) Free space EDGE-BANDING PART (for each side): Lamps to heat the workpieces side Gkodpfx Aszz R Rgjcmjb Glueing Unit (Hot Melt glue) 04.1570 - Pressure zone Edge coils supporting unit (No. of reels) 2 Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) 30 m/min (0°-25°) Rough Trimming unit 08.0555 (1 x Kw 0,66) Multi Function Unit (Profile contour Trimming unit) MFA 08.342 (2 x Kw 0,66) SERVO - 20m/min Profile Scraping unit 08.519 Glue scraping unit 08.50 Buffing unit 08.617-2 (2 x Kw 0,18) Milling grooving unit: 75.30 (2 x Kw 4,4)

Condition: good (used), Year of construction: 2006, For sale is a compact edge banding machine from the German quality manufacturer Hebrock, type TOP 2000, manufactured in 2006. This machine is ideally suited for smaller and medium-sized carpentry workshops as well as for the professional production of individual parts and small series. Due to its compact design, it requires relatively little floor space. Technical data: Godpfxjzz Nw Es Acmjkb +Manufacturer: Hebrock +Type: TOP 2000 +Year of manufacture: 2006 +Machine number: 6333 +Maximum edge thickness: approx. 3 mm +Workpiece thickness: approx. 8–50 mm +Minimum workpiece length: approx. 200 mm +Minimum workpiece width: approx. 90 mm +Feed rate: approx. 10 m/min +Quick-heating glue tank +Automatic edge infeed +Pneumatic trimming station for roll material +Trimming saw unit +Flush and radius milling unit, top and bottom The Hebrock TOP 2000 is known for its robust, clear design and ease of operation. A reliable and space-saving machine for the professional application of edge banding made of plastic, melamine, and veneer. Inspection and demonstration possible by prior appointment. Loading or delivery can be arranged upon request. All information is subject to change without notice. Subject to prior sale. Price: Negotiable €3900 net.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Pre-milling aggregate Glue station for granulate Pneumatic pre-cut guillotine Trimming unit with two saw blades Gkodpfjzz Nnkex Acmsb Profiling milling unit with profile cutters Profile scraper Polishing units Year of manufacture: 2009 Machine length: 3.7 m

Condition: used, machine/vehicle number: 007981, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Gkjdpfx Acezz Ipmemjb Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 005657, Type of edging: Thin edge, Thick edge Gksdpezz Ipaefx Acmsb Gluing System: PUR Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 30 m/min Maximum panel thickness: 60 mm Operating Units: 13 nr

Condition: good (used), Year of construction: 1994, workpiece height (max.): 60 mm, feed rate X-axis: 11 m/min, total length: 4,800 mm, overall weight: 1,000 kg, Edge bander HolzHer, model 1437 SE, very well equipped; cartridge adhesive station, flush trimming with two milling units, radius R=3mm, two additional units available for exchange, profile trimming, chamfering. Gsdpszzz Aaofx Acmekb

Condition: used, Year of construction: 2018, functionality: fully functional, input voltage: 400 V, input current: 21 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, feed rate X-axis: 7 m/min, actuation type: electric, total height: 1,500 mm, total length: 3,200 mm, total width: 1,100 mm, overall weight: 650 kg, Equipment: CE marking, documentation/manual, – Made in Italy – Year of manufacture: 2018 – Preliminary milling – Technical documentation, CE marking TECHNICAL SPECIFICATIONS: – Edge thickness: 0.5 - 3 mm – Wood veneer thickness: 0.5 - 5 mm – Element height: 8 - 50 mm – Minimum edging length: 160 mm – Minimum panel width: 110 mm – Feed rate: 7 m/min – Operating temperature: 190° - 220° – Preliminary milling – Glue application roller – Guillotine for preliminary edge trimming – Saws for final edge trimming (front/rear) Gjdpfx Ajzzzr Iecmokb – Milling (top/bottom) – Radius edging – Straight edging – Polishing units – Air blow for each unit – Operating pressure: 6 - 8 bar – Table height from base: 900 mm – Nozzle diameter: 2x 60 mm and 2x 80 mm – Transport dimensions (L/W/H): 320 / 90 / 150 cm – Weight: ~650 kg

Condition: ready for operation (used), Year of construction: 2014, operating hours: 1,174 h, This HOMAG KDF 230 edgebander was manufactured in 2014. It has processed a total of 65,428 workpieces and 108,908.92 meters of edge length. The machine features a digital touchscreen control panel and a multi-flexible overhead dust extraction system. If you are looking to get high-quality edgebanding capabilities, consider the HOMAG KDF 230 machine we have for sale. Contact us for further details. • Total Workpieces Processed: 65,428 Stck • Total Edge Length Processed: 108,908.92 m • Application Unit Temperature: 190 °C (Target), 76 °C (Actual) • Edge Material Settings / Thickness preset: 1 - 1.4 mm / 2.2 mm • Dust Extraction System: Multi-flexible overhead dust suction extraction hose setup connected to internal processing units Gkedezzwhfepfx Acmsb

Condition: excellent (used), Year of construction: 2013, Brandt Highflex KDF 220 edge banding machine with joining, corner copying, and two trimming blades. Highly automated. A video of the machine in operation can be sent upon request. Edge thickness range approx. 0.4 - 3mm, solid edge up to 6mm Workpiece height approx. 10 - 60mm Feed speed approx. 10m/min Noise protection hood Extendable workpiece support Dust extraction connection 1x120mm, 1x100mm, 3x80mm Easy-Touch control panel EC+ for easy machine operation 4 programs can be stored. Machine in Highflex version, highly automated, switching from thin edge to thick edge via programs Units: Extended infeed zone Chain track central lubrication, pneumatic manual Glue pot quick-change device, currently one glue pot available Top pressure manual adjustment, PU rollers Infeed guide manual adjustment with SIKO counter for chip removal Joining milling cutter with diamond milling cutters, sharpened Contact heating shoe for preheating the panel Godpszzqwmefx Acmjkb Gluing section with automatic edge feed for roll material up to 3mm, switchable for co-rotating and counter-rotating operation Pressure zone with 3 rollers, pneumatic adjustment between thin and thick edge Cut-off saw with 2 motors, straight cuts or bevel cuts (program adjustment) Combination milling unit, pneumatically controlled for flush trimming, chamfer and radius Corner rounding milling cutter R2 with diamond milling cutter with integrated sensing ring Radius trimming blade R2, pneumatically retractable with quick-change device Glue joint trimming blade with large roller, pneumatically controlled Hood locking CE marking All indexable inserts of the milling units and the trimming blades have been renewed or re-sharpened, saws sharpened, diamond joining milling cutters sharpened. The machine is therefore ready for immediate use. Only the diamond milling cutter of the profile milling unit has not been renewed, but it is still sharp. Original paint, only a few spots have been touched up. Unfortunately, the machine does not have an operating hour counter, but it still looks very good visually. Very good condition, see original photos. Machine dimensions approx. 4550 x 1250 x 1550mm (LxWxH) Weight approx. 1400kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: excellent (used), Excellent condition, only 600 operating hours, 1402 DS model. Gedpfx Aozzkh Eecmskb

Condition: good (used), Year of construction: 2016, machine/vehicle number: 0000087, functionality: fully functional, operating hours: 2,202 h, power: 8,000 kW (10,876.96 HP), input voltage: 400 V, input current: 18 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 6 mm, feed rate X-axis: 11 m/min, actuation type: electric, total height: 1,550 mm, total length: 4,100 mm, total width: 780 mm, overall weight: 990 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Preliminary milling unit Edge banding glue station Capability to glue up to 60mm Feed rate 11m per min Control panel with temperature setting Trimming of edge banding from a roll Guillotine for trimming edge banding from a roll Top/bottom milling unit with profiled milling cutters Polishing unit Year of manufacture 2016 Excellent condition Gkodpfozzcc Iox Acmeb

Condition: used, Year of construction: 2009, 0,4-6 mm Workingpiece thickness from to 6-60 mm Gksdpfx Acjzy Sfcomjb Total length 3516 mm Feed speed 10 m/min. Weight 850 kg

Condition: good (used), BRANDT highflex 1220 edger Kdf220 Pre-milling cutters Replaceable trimming head Glue application with a roller Pneumatic pre-trimming guillotine Pressure rollers Finished-edge trimming blades Up-and-down milling unit R1-R2, pneumatically adjustable Corner rounding Profile trimming cycle Flat trimming cycle Max. part height 60mm Max. veneer thickness in roll 3mm Material width min. 70mm Feed rate 11m/min Machine length 455cm Gjdpfxjzy N Nro Acmekb Connected power approx. 10KW Machine inspected, ready for operation.

Condition: good (used), Year of construction: 2002, machine/vehicle number: P/50078, functionality: fully functional, power: 17 kW (23.11 HP), input voltage: 24 V, input current: 40 A, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 20 mm, height adjustment type: electric, actuation type: electric, total height: 1,500 mm, total length: 8,200 mm, total width: 1,000 mm, overall weight: 3,300 kg, Equipment: CE marking, documentation/manual, Here are some additional key specifications for the machine: Gkjdpfszy Nzzox Acmeb Edge thickness: 0.3 – 20 mm Panel thickness: up to 60 mm Feed rate: 12 – 20 m/min Due to a change in the production line, this edge banding machine is now available for sale. The machine was used infrequently in recent years but remained in operation until April 2026. All functions are working, but some fine adjustments are required. The machine is disconnected from the power supply and is located in the heated hall. The manual and adjustment tools are included. A generous amount of edge banding material is included in the purchase price (see photo). A forklift is available for loading. If necessary, a second forklift can be arranged.

Condition: used, Year of construction: 1993, Used machine Gedpfx Aszyy Avecmokb Year of manufacture: 1993 Equipment and technical data:

Condition: used, machine/vehicle number: 008729, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Grooving Unit: yes Max feed speed: 40 m/min Gjdpfxozylv Is Acmokb Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: excellent (used), SINGLE SIDE EDGE BANDER (RIGHT) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Edges thickness in stips / lippings (min/max) mm 0,4 / 15 Panels thickness (min/max) mm 8 / 60 Gksdpfxozyaiis Acmeb Numerical Control POWERTOUCH Feeding speed (adjustable) m/min 8 - 18 Top pressure system with rubber wheels Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) (2 x Kw 2,2) Lamps to heat the workpieces side Glueing Unit (Hot Melt Glue + Quick Melt system) A12 Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit (2 x Kw 0,35) pneu Rough Trimming unit (2 x Kw 0,55) Corners Rounding (contour trimming) (2 x Kw 0,4) Profile edge scraping unit (fast-release) Glue scraping unit Spraying Unit (for polishing liquid) Buffing unit (2 x Kw 0,18)

Condition: excellent (used), SINGLE SIDE EDGE BANDER (RIGHT) Edges (band in rolls) thickness (Min/Max) mm 0,3/ 3 Edges thickness in stips / lippings (min/max) mm 0,4 / 8 Gjdpfx Ajzyahxjcmokb Panels thickness (min/max) mm 8 / 60 Numerical Control POWERTOUCH Feeding speed (adjustable) m/min 8 - 14 Top pressure system with rubber wheels Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) (2 x Kw 2,2) Lamps to heat the workpieces side Glueing Unit (Hot Melt Glue + Quick Melt system) QA65 N Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) (2 x Kw 0,22) Fine Trimming unit (2 x Kw 0,55) Corners Rounding (contour trimming) (1 x Kw 0,35) Profile edge scraping unit MZ40 Glue scraping unit Buffing unit (2 x Kw 0,09)

Condition: excellent (used), pre-milling unit glue station for edge banding guillotine pressure rollers unit for precisely trimming the edge unit for milling the excess edge material from the top and bottom of the workpiece corner rounding unit radius edger polishers machine length 450 cm year of manufacture 2016 Gedpozx T I Aofx Acmjkb 11 kW 400V

Condition: used, Year of construction: 2011, Connected load: 10 kW, dust extraction: 1x 120 / 3x 60 / 1x 100 mm, feed rate: 10 m/min, workpiece thickness: 8 - 50 mm, edge thickness: 0.4 - 3.0 mm, roll separation: max. 0.4 - 3.0 mm x 45 mm, working height: 950 mm, dimensions: 4280 x 1300 x 2180 mm, weight: approx. 1400 kg. Location: Nattheim. Gjdszx Tlnepfx Acmokb

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Preliminary milling unit Edge banding glue station for granules Capability to glue edge banding from 8-60 mm Feed rate of 11 m per minute Gkjdpfx Acezx Szusmjb Control panel with temperature setting Preliminary trimming of edge banding from a roll Guillotine for trimming edge banding from a roll Pressing zone with three rollers Cutting wheels to trim excess edge banding on the edges Top/bottom milling unit with profiled milling cutters Profiled sanding unit Flat sanding unit Corner milling unit Polishing unit Year of manufacture: 2013

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Numerically adjustable infeed fence Air flotation infeed table Anti-adhesive liquid spray system Pre-milling unit with diamond cutters Edge feeder for edge banding from coil or strips Godpfxszx Sxge Acmskb Glue station for GlueJet cartridges or L-Tronic laser technology 4 pressure rollers with pneumatic pressure adjustment Edge lubricant spray system Dual-motor precision end trimming unit with pneumatic angle adjustment Top and bottom edge surplus trimming unit (straight trimming) Numerically adjustable profile edge milling unit Flat scraper Profile scraper – two profiles Cleaning liquid spray system Pneumatically activated buffing units Pneumatically activated edge buffing unit Feed speed continuously adjustable from 10 to 25 m/min Automatic lubrication of the feed chain Frame support Minimum workpiece length: 140 mm Workpiece thickness: 8–60 mm Minimum workpiece width: 60 mm Year of manufacture: 2016

Condition: new, CATALOG NUMBER HL001 - New machine, in stock – Pre-milling unit – Radial scraper + polishers TECHNICAL DATA - Panel thickness: 45mm - Edge thickness: 0.4 mm – 3 mm - Min panel width: 90mm - Min panel length: 90mm - Feed speed: 7m/min - Pre-milling: 9000 rpm - Top/bottom: 10500 rpm - Front/back: 8800 rpm - Polishing: 2800 rpm - Main motor: 6kW - Feed power: 0.75kW Gkodezx Rq Ijpfx Acmeb - Pre-milling power: 1.5kW - Glue spindle power: 0.25kW - Top-bottom milling power: 0.18kW - Top milling power: 0.55kW - Top polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Bottom polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Working table height: 856mm, extended support width: 560mm - Extraction connection: 3x100mm - Dimensions (L/W/H): 3200/1200/1200mm, weight: 660kg Net price: 49,900 PLN Net price: 11,880 EUR based on 4.2 EUR exchange rate (Prices may change with significant fluctuations)